D. P. Adhikary and A. V. Dyskin, A Cosserat continuum model for layered materials, Computers and Geotechnics, vol.20, issue.1, pp.15-45, 1997.
DOI : 10.1016/S0266-352X(96)00011-0

N. Akishev, I. Zakirov, and A. Nikitin, Patent no Device for sheet material corrugation

N. Akishev, I. Zakirov, and A. Nikitin, Patent no Device for sheet material corrugation

N. Akishev and I. A. Zakirov, Patent no Foldable mandrel for production of a single curvature folded core for a sandwich panel, 2005.

N. Akishev and I. A. Zakirov, Patent no Method for production of sandwich panels with zigzag corrugated core

H. Allen, Analysis and design of structural sandwich panels, 1969.

S. Ambartsumian, Theory of anisotropic plates, 1969.

A. M. Amini, D. Dureisseix, and P. Cartraud, Multi-scale domain decomposition method for large-scale structural analysis with a zooming technique: Application to plate assembly, International Journal for Numerical Methods in Engineering, vol.172, issue.5, pp.417-443, 2009.
DOI : 10.1016/S0045-7825(98)00224-2
URL : https://hal.archives-ouvertes.fr/hal-00401727

M. F. Ashby, Multi-objective optimization in material design and selection, Acta Materialia, vol.48, issue.1, pp.359-369, 2000.
DOI : 10.1016/S1359-6454(99)00304-3

N. Auffray, R. Bouchet, and Y. Bréchet, Derivation of anisotropic matrix for bi-dimensional strain-gradient elasticity behavior, International Journal of Solids and Structures, vol.46, issue.2, pp.440-454, 2009.
DOI : 10.1016/j.ijsolstr.2008.09.009
URL : https://hal.archives-ouvertes.fr/hal-00827683

E. Baranger, P. Guidault, C. Cluzel, and S. Fischer, Generation of physical defects for the prediction of the behaviour of folded cores, European Conference on Computational Mechanics Palais des Congrès, 2010.

B. Basily and A. Elsayed, A continuous folding process for sheet materials, International Journal of Materials and Product Technology, vol.21, pp.217-238, 2004.

B. Basily and A. Elsayed, Patent no Technology for continuous folding of sheet materials into a honeycomb-like configuration, 2007.

B. Basily, A. Elsayed, and D. H. Kling, Technology for continuous folding of sheet materials, pp.89-91, 2006.

B. Basily and E. Elsayed, Dynamic axial crushing of multilayer core structures of folded Chevron patterns, International Journal of Materials and Product Technology, vol.21, issue.1/2/3, pp.169-185, 2004.
DOI : 10.1504/IJMPT.2004.004750

V. L. Berdichevsky, An asymptotic theory of sandwich plates, International Journal of Engineering Science, vol.48, issue.3, pp.383-404, 2010.
DOI : 10.1016/j.ijengsci.2009.09.001

D. Bigoni and W. J. Drugan, Analytical Derivation of Cosserat Moduli via Homogenization of Heterogeneous Elastic Materials, Journal of Applied Mechanics, vol.74, issue.4, pp.741-753, 2007.
DOI : 10.1115/1.2711225

J. Boussinesq, 1871. étude nouvelle sur l'équilibre et le mouvement des corps solides élastiques dont certaines dimensions sont très petites par rapport à d'autres, Journal de Mathématiques, vol.16, pp.125-274

C. Boutin, Microstructural effects in elastic composites, International Journal of Solids and Structures, vol.33, issue.7, pp.1023-1051, 1996.
DOI : 10.1016/0020-7683(95)00089-5
URL : https://hal.archives-ouvertes.fr/hal-00940462

N. Buannic and P. Cartraud, Higher-order effective modeling of periodic heterogeneous beams. I. Asymptotic expansion method, International Journal of Solids and Structures, vol.38, issue.40-41, pp.40-41, 2001.
DOI : 10.1016/S0020-7683(00)00422-4

N. Buannic and P. Cartraud, Higher-order effective modeling of periodic heterogeneous beams. II. Derivation of the proper boundary conditions for the interior asymptotic solution, International Journal of Solids and Structures, vol.38, issue.40-41, pp.40-41, 2001.
DOI : 10.1016/S0020-7683(00)00423-6

N. Buannic, P. Cartraud, and T. Quesnel, Homogenization of corrugated core sandwich panels, Composite Structures, vol.59, issue.3, pp.299-312, 2003.
DOI : 10.1016/S0263-8223(02)00246-5

D. Caillerie, Thin elastic and periodic plates, Mathematical Methods in the Applied Sciences, vol.2, issue.18, pp.159-191, 1984.
DOI : 10.1002/mma.1670060112

J. F. Caron, A. D. Diaz, R. P. Carreira, A. Chabot, and A. Ehrlacher, Multi-particle modelling for the prediction of delamination in multi-layered materials, Composites Science and Technology, vol.66, issue.6, pp.755-765, 2006.
DOI : 10.1016/j.compscitech.2004.12.022

J. Caron and K. Sab, Un nouveau modèle de plaque multicouche épaisse. a new model for thick laminates, Comptes Rendus de l'Académie des Sciences -Series IIB -Mechanics, pp.595-600, 2001.
DOI : 10.1016/s1620-7742(01)01372-1

E. Carrera, Theories and finite elements for multilayered, anisotropic, composite plates and shells, Archives of Computational Methods in Engineering, vol.35, issue.6, pp.87-140, 2002.
DOI : 10.1007/BF02736649

E. Carrera, Historical review of Zig-Zag theories for multilayered plates and shells, Applied Mechanics Reviews, vol.56, issue.3, pp.287-308, 2003.
DOI : 10.1115/1.1557614

E. Carrera, Theories and Finite Elements for Multilayered Plates and Shells:A Unified compact formulation with numerical assessment and benchmarking, Archives of Computational Methods in Engineering, vol.46, issue.5???7, pp.215-296, 2003.
DOI : 10.1007/BF02736224

A. Cecchi and K. Sab, Out of plane model for heterogeneous periodic materials: the case of masonry, European Journal of Mechanics - A/Solids, vol.21, issue.5, pp.715-746, 2002.
DOI : 10.1016/S0997-7538(02)01243-3

A. Cecchi and K. Sab, A comparison between a 3D discrete model and two homogenised plate models for periodic elastic brickwork, International Journal of Solids and Structures, vol.41, issue.9-10, pp.9-10, 2004.
DOI : 10.1016/j.ijsolstr.2003.12.020

A. Cecchi and K. Sab, A homogenized Reissner???Mindlin model for orthotropic periodic plates: Application to brickwork panels, International Journal of Solids and Structures, vol.44, issue.18-19, pp.18-19, 2007.
DOI : 10.1016/j.ijsolstr.2007.02.009

E. Cerda and L. Mahadevan, Confined developable elastic surfaces: cylinders, cones and the Elastica, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.461, issue.2055, pp.671-700, 2005.
DOI : 10.1098/rspa.2004.1371

A. Chen and J. F. Davalos, A solution including skin effect for stiffness and stress field of sandwich honeycomb core, International Journal of Solids and Structures, vol.42, issue.9-10, pp.9-10, 2005.
DOI : 10.1016/j.ijsolstr.2004.09.042

P. G. Ciarlet and P. Destuynder, Justification of the 2-dimensional linear plate model, Journal De Mecanique, vol.18, issue.2, pp.315-344, 1979.

F. Cote, R. Biagi, H. Bart-smith, and V. S. Deshpande, Structural response of pyramidal core sandwich columns, International Journal of Solids and Structures, vol.44, issue.10, pp.3533-3556, 2007.
DOI : 10.1016/j.ijsolstr.2006.10.004

J. Dallot and K. Sab, Limit analysis of multi-layered plates. Part II: Shear effects, Journal of the Mechanics and Physics of Solids, vol.56, issue.2, pp.581-612, 2008.
DOI : 10.1016/j.jmps.2007.05.006

P. De-buhan and B. Sudret, Micropolar multiphase model for materials reinforced by linear inclusions, European Journal of Mechanics - A/Solids, vol.19, issue.4, pp.669-687, 2000.
DOI : 10.1016/S0997-7538(00)00181-9

E. Demaine and M. Demaine, Recent Results in Computational Origami, Proceedings of the 3rd International Meeting of Origami Science, Math, and Education, 2001.
DOI : 10.1201/b15735-3

D. Diaz, A. Caron, J. F. Ehrlacher, and A. , Analytical determination of the modes I, II and III energy release rates in a delaminated laminate and validation of a delamination criterion, Composite Structures, vol.78, issue.3, pp.424-432, 2007.
DOI : 10.1016/j.compstruct.2005.11.003

K. J. Doherty, A. Yiournas, J. A. Wagner, and Y. Murty, Structural performance of aluminum and stainless steel pyramidal truss core sandwich panels, 2009.

J. P. Duncan and J. L. Duncan, Folded Developables, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.383, issue.1784, pp.191-205, 1784.
DOI : 10.1098/rspa.1982.0126

A. El-sawi, A. Wifi, M. Younan, E. Elsayed, and B. Basily, Application of folded sheet metal in flat bed solar air collectors, Applied Thermal Engineering, vol.30, issue.8-9, pp.864-871, 2010.
DOI : 10.1016/j.applthermaleng.2009.12.018

S. Fischer, K. Drechsler, S. Kilchert, and A. Johnson, Mechanical tests for foldcore base material properties, Composites Part A: Applied Science and Manufacturing, vol.40, issue.12, pp.1941-1952, 2009.
DOI : 10.1016/j.compositesa.2009.03.005

C. Florence and K. Sab, A rigorous homogenization method for the determination of the overall ultimate strength of periodic discrete media and an application to general hexagonal lattices of beams, European Journal of Mechanics - A/Solids, vol.25, issue.1, pp.72-97, 2006.
DOI : 10.1016/j.euromechsol.2005.06.011

S. Forest, F. Pradel, and K. Sab, Asymptotic analysis of heterogeneous Cosserat media, International Journal of Solids and Structures, vol.38, issue.26-27, pp.26-27, 2001.
DOI : 10.1016/S0020-7683(00)00295-X

S. Forest and K. Sab, Cosserat overall modeling of heterogeneous materials, Mechanics Research Communications, vol.25, issue.4, pp.449-454, 1998.
DOI : 10.1016/S0093-6413(98)00059-7

L. V. Gewiss, Patent no. FR 1532509, 06 1968, Procédé et machines pour le façonnage de structures chevronnées et de structures dérivant des structures chevronnées

L. V. Gewiss, Patent no. US 3,461, 013, 04 1969a. Method and apparatus for sandwiching corrugated core between skin layers

L. V. Gewiss, Patent no. US 3,433, 692, 03 1969b. Method for forming herringbone configurations for sandwich structures

L. V. Gewiss, Patent no. US 4,012, 932, 03 1977. Machine for manufacturing herringbone-pleated structures

L. J. Gibson and M. F. Ashby, Cellular solids, 1988.
DOI : 10.1017/CBO9781139878326

J. H. Glenn, Nasa image of glass reinforced aluminum (glare) honeycomb composite sandwich structure. web, p.25, 2000.

M. Grediac, A finite element study of the transverse shear in honeycomb cores, International Journal of Solids and Structures, vol.30, issue.13, pp.1777-1788, 1993.
DOI : 10.1016/0020-7683(93)90233-W

R. Hadj-ahmed, G. Foret, and A. Ehrlacher, Stress analysis in adhesive joints with a multiparticle model of multilayered materials (M4), International Journal of Adhesion and Adhesives, vol.21, issue.4, pp.297-307, 2001.
DOI : 10.1016/S0143-7496(00)00034-8

S. Heimbs, Virtual testing of sandwich core structures using dynamic finite element simulations, Computational Materials Science, vol.45, issue.2, pp.205-216, 2009.
DOI : 10.1016/j.commatsci.2008.09.017

S. Heimbs, J. Cichosz, M. Klaus, S. Kilchert, and A. Johnson, Sandwich structures with textile-reinforced composite foldcores under impact loads, Composite Structures, vol.92, issue.6, pp.1485-1497, 2010.
DOI : 10.1016/j.compstruct.2009.11.001

S. Heimbs, T. Mehrens, P. Middendorf, A. Maier, and M. Schumacher, Numerical determination of the nonlinear effective mechanical properties of folded core structures for aircraft sandwich panels, 2006.

S. Heimbs, P. Middendorf, S. Kilchert, A. Johnson, and M. Maier, Experimental and Numerical Analysis of Composite Folded Sandwich Core Structures Under Compression, Applied Composite Materials, vol.67, issue.13, pp.363-377, 2007.
DOI : 10.1007/s10443-008-9051-9

A. Herrmann, P. Zahlen, and I. Zuardy, Sandwich Structures 7: Advancing with Sandwich Structures and Materials, Sandwich Structures Technology in Commercial Aviation, pp.13-26, 2005.

H. Hochfeld, Patent no. US2901951, 09 1959. Process and machine for pleating pliable materials

J. Hohe, A direct homogenisation approach for determination of the stiffness matrix for microheterogeneous plates with application to sandwich panels, Composites Part B: Engineering, vol.34, issue.7, pp.615-626, 2003.
DOI : 10.1016/S1359-8368(03)00063-5

J. Hohe and W. Becker, A refined analysis of the effective elasticity tensor for general cellular sandwich cores, International Journal of Solids and Structures, vol.38, issue.21, pp.3689-3717, 2001.
DOI : 10.1016/S0020-7683(00)00246-8

J. Hohe and W. Becker, Effective stress-strain relations for two-dimensional cellular sandwich cores: Homogenization, material models, and properties, Applied Mechanics Reviews, vol.55, issue.1, pp.61-87, 2002.
DOI : 10.1115/1.1425394

P. Isaksson, A. Krusper, and P. Gradin, Shear correction factors for corrugated core structures, Composite Structures, vol.80, issue.1, pp.123-130, 2007.
DOI : 10.1016/j.compstruct.2006.04.066

T. Kawasaki, On the relation between mountain-creases and valley-creases of a flat origami, Proceedings of the 1st International Meeting of Origami Science and Technology, pp.229-237, 1989.

R. Kayumov, I. Zakirov, K. Alekseev, K. Alekseev, and R. Zinnurov, Determination of load-carrying capacity in panels with chevron-type cores, Russian Aeronautics (Iz VUZ), vol.50, issue.4, pp.357-361, 2007.
DOI : 10.3103/S1068799807040022

R. Kehrle, Patent no Method for the production of a sandwich structure for a sandwich composite, 2004.

R. Kehrle, Patent no. DE 10 Core layer for a sandwich structure, comprises a structure folded out of semi-finished product, which has a layer out of tearproof flat material and a layer out of stiff flat material, 2009.

R. Kehrle, Patent no Folded core having a high compression modulus and articles made from the same, 2010.

S. Kelsey, R. Gellatly, and B. Clark, The Shear Modulus of Foil Honeycomb Cores, Aircraft Engineering and Aerospace Technology, vol.30, issue.10, pp.294-302, 1958.
DOI : 10.1108/eb033026

V. Khaliulin, A technique for synthesizing the structures of folded cores of sandwich panels, Russian Aeronautics, vol.48, issue.1, pp.8-16, 2005.

V. Khaliulin and V. Batrakov, Technological schemes of zigzag crimp shaping, Russian Aeronautics, vol.48, issue.2, pp.106-114, 2005.

V. Khaliulin and V. Batrakov, A technique for calculating the z-crimp springing at its shaping from aramide papersAramide paper ;Springing, Russian Aeronautics, vol.494, pp.106-115, 2006.

V. Khaliulin, A. Razdaibedin, and D. Menyashkin, Evaluation of influence of processing parameter instability on the accuracy of folded cores, Russian Aeronautics, vol.48, issue.3, pp.94-101, 2005.

V. I. Khaliulin, Construction of-nodal zone deformation model during forming fold-shaped structures, Izvestiya Vysshikh Uchebnykh Zavedenii Aviatsionaya Tekhnika, issue.4, pp.61-65, 1999.

M. Kintscher, L. Karger, A. Wetzel, and D. Hartung, Stiffness and failure behaviour of folded sandwich cores under combined transverse shear and compression, Composites Part A: Applied Science and Manufacturing, vol.38, issue.5, pp.1288-1295, 2007.
DOI : 10.1016/j.compositesa.2006.11.008

D. Kling, Doubly periodic flat surfaces in three-space, 1997.

D. H. Kling and . Patent, Paterning technology for folded sheet structures, pp.997-999, 2005.

D. H. Kling, Folding methods, structures and apparatuses, 2007.

R. V. Kohn and M. Vogelius, A new model for thin plates with rapidly varying thickness, International Journal of Solids and Structures, vol.20, issue.4, pp.333-350, 1984.
DOI : 10.1016/0020-7683(84)90044-1

V. Kouznetsova, M. G. Geers, and W. A. Brekelmans, Multi-scale constitutive modelling of heterogeneous materials with a gradient-enhanced computational homogenization scheme, International Journal for Numerical Methods in Engineering, vol.42, issue.8, pp.1235-1260, 2002.
DOI : 10.1002/nme.541

A. Lachihab and K. Sab, Aggregate composites: a contact based modeling, Computational Materials Science, vol.33, issue.4, pp.467-490, 2005.
DOI : 10.1016/j.commatsci.2004.10.003

M. Laroussi, K. Sab, and A. Alaoui, Foam mechanics: nonlinear response of an elastic 3D-periodic microstructure, International Journal of Solids and Structures, vol.39, issue.13-14, pp.13-14, 2002.
DOI : 10.1016/S0020-7683(02)00172-5

L. Laszczyk and R. B. Dendievel, Shape optimization of the periodic architecture of lightweight flexural panels, 2010.

A. Lebée and K. Sab, A Bending-Gradient model for thick plates, Part II: Closed-form solutions for cylindrical bending of laminates, International Journal of Solids and Structures, vol.48, issue.20, 2010.
DOI : 10.1016/j.ijsolstr.2011.06.005

A. Lebée and K. Sab, A Cosserat multiparticle model for periodically layered materials, Mechanics Research Communications, vol.37, issue.3, pp.293-297, 2010.
DOI : 10.1016/j.mechrescom.2010.01.007

A. Lebée and K. Sab, Reissner???Mindlin Shear Moduli of a Sandwich Panel with Periodic Core Material, of Advances in Mechanics and Mathematics, pp.169-177, 2010.
DOI : 10.1007/978-1-4419-5695-8_18

A. Lebée and K. Sab, Transverse shear stiffness of a chevron folded core used in sandwich construction, International Journal of Solids and Structures, vol.47, issue.18-19, pp.18-19, 2010.
DOI : 10.1016/j.ijsolstr.2010.05.024

D. Leguillon, A method based on singularity theory to predict edge delamination of laminates, International Journal of Fracture, vol.100, issue.1, pp.105-120, 1999.
DOI : 10.1023/A:1018382422833

T. Lewinski, Effective models of composite periodic plates???I. Asymptotic solution, International Journal of Solids and Structures, vol.27, issue.9, pp.1155-1172, 1991.
DOI : 10.1016/0020-7683(91)90116-W

T. Lewinski, Effective models of composite periodic plates???II. Simplifications due to symmetries, International Journal of Solids and Structures, vol.27, issue.9, pp.1173-1184, 1991.
DOI : 10.1016/0020-7683(91)90117-X

T. Lewinski, Effective models of composite periodic plates???III. Two-dimensional approaches, International Journal of Solids and Structures, vol.27, issue.9, pp.1185-1203, 1991.
DOI : 10.1016/0020-7683(91)90118-Y

. Lognon, Pleated dress from atelier gérard lognon (france) http://lesateliersgerardlognon.com, 2010.

A. E. Love, The Small Free Vibrations and Deformation of a Thin Elastic Shell, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.179, issue.0, pp.491-546, 1888.
DOI : 10.1098/rsta.1888.0016

B. Miara and P. Podio-guidugli, Une approche formelle unifi??e des th??ories de plaques et poutres lin??airement ??lastiques, Comptes Rendus Mathematique, vol.343, issue.10, pp.675-678, 2006.
DOI : 10.1016/j.crma.2006.09.035

R. Mindlin, Influence of Rotatory Inertia and Shear on Flexural Motions of Isotropic, Elastic Plates, Journal of Applied Mechanics, vol.18, pp.31-38, 1951.
DOI : 10.1007/978-1-4613-8865-4_29

K. Miura, Zeta-core sandwich -its concept and realization, ISAS report, vol.37, issue.6, pp.137-164, 1972.

K. Miura, Design of zeta-stiffened panels, 1980.

K. Miura, Map fold a la miura style, its physical characteristics and application to the space science, Research of Pattern Formation, ktk scientific publishers Edition. R. Takaki, pp.77-90, 1994.

D. Mohr and M. Doyoyo, Deformation-induced folding systems in thin-walled monolithic hexagonal metallic honeycomb, International Journal of Solids and Structures, vol.41, issue.11-12, pp.11-12, 2004.
DOI : 10.1016/j.ijsolstr.2004.01.014

G. Movchan, Analysis of folded structures for impact resistance, Russian Aeronautics (Iz VUZ), vol.50, issue.4, pp.439-441, 2007.
DOI : 10.3103/S1068799807040162

H. Murakami, Laminated Composite Plate Theory With Improved In-Plane Responses, Journal of Applied Mechanics, vol.53, issue.3, pp.661-666, 1986.
DOI : 10.1115/1.3171828

T. Naciri, A. Ehrlacher, and A. Chabot, Interlaminar stress analysis with a new Multiparticle modelization of Multilayered Materials (M4), Composites Science and Technology, vol.58, issue.3-4, pp.3-4, 1998.
DOI : 10.1016/S0266-3538(97)00085-7

M. Nguyen, S. Jacombs, R. Thomson, D. Hachenberg, M. Scott et al., Simulation of impact on sandwich structures, Composite Structures, vol.67, issue.2, pp.217-227, 2005.
DOI : 10.1016/j.compstruct.2004.09.018

T. K. Nguyen, K. Sab, and G. Bonnet, Shear Correction Factors for Functionally Graded Plates, Mechanics of Advanced Materials and Structures, vol.329, issue.8, pp.567-575, 2007.
DOI : 10.1002/nme.1620330712
URL : https://hal.archives-ouvertes.fr/hal-00691061

T. Nguyen, K. Sab, and G. Bonnet, First-order shear deformation plate models for functionally graded materials, Composite Structures, vol.83, issue.1, pp.25-36, 2008.
DOI : 10.1016/j.compstruct.2007.03.004
URL : https://hal.archives-ouvertes.fr/hal-00691028

T. Nguyen, K. Sab, and G. Bonnet, Green???s operator for a periodic medium with traction-free boundary conditions and computation of the effective properties of thin plates, International Journal of Solids and Structures, vol.45, issue.25-26, pp.25-26, 2008.
DOI : 10.1016/j.ijsolstr.2008.08.015

V. Nguyen, J. Caron, and K. Sab, A model for thick laminates and sandwich plates, Composites Science and Technology, vol.65, issue.3-4, pp.3-4, 2005.
DOI : 10.1016/j.compscitech.2004.09.014

A. K. Noor, M. Malik, and . Feb, An assessment of five modeling approaches for thermo-mechanical stress analysis of laminated composite panels, Computational Mechanics, vol.25, issue.1, pp.43-58, 2000.
DOI : 10.1007/s004660050014

A. Nosier, A. Yavari, and S. Sarkani, A study of the edge-zone equation of Mindlin-Reissner plate theory in bending of laminated rectangular plates, Acta Mechanica, vol.25, issue.3-4, pp.227-238, 2001.
DOI : 10.1007/BF01246734

N. Pagano, Exact Solutions for Composite Laminates in Cylindrical Bending, Journal of Composite Materials, vol.1, issue.3, pp.398-411, 1969.
DOI : 10.1177/002199836900300304

N. Pagano, Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates, Journal of Composite Materials, vol.7, issue.1, pp.20-34, 1970.
DOI : 10.1177/002199837000400102

N. Pagano, Influence of Shear Coupling in Cylindrical. Bending of Anisotropic Laminates, Journal of Composite Materials, vol.2, issue.3, pp.330-343, 1970.
DOI : 10.1177/002199837000400305

N. Pagano, Interlaminar response of composite materials, of Composite Materials Series, 1989.

N. J. Pagano, Stress fields in composite laminates, International Journal of Solids and Structures, vol.14, issue.5, pp.385-400, 1978.
DOI : 10.1016/0020-7683(78)90020-3

D. H. Pahr and F. G. Rammerstorfer, Buckling of honeycomb sandwiches: Periodic finite element considerations, Cmes-Computer Modeling In Engineering & Sciences, vol.12, issue.3, pp.229-241, 2006.

A. Petras and M. P. Sutcliffe, Failure mode maps for honeycomb sandwich panels, Composite Structures, vol.44, issue.4, pp.237-252, 1999.
DOI : 10.1016/S0263-8223(98)00123-8

F. Pradel and K. Sab, Homogenization of discrete media, Le Journal de Physique IV, vol.08, issue.PR8, pp.317-324, 1998.
DOI : 10.1051/jp4:1998839

F. G. Rammerstorfer, D. H. Pahr, T. Daxner, and W. K. Vonach, Buckling in Thin Walled Micro and Meso Structures of Lightweight Materials and Material Compounds, Computational Mechanics, vol.37, issue.6, pp.470-478, 2006.
DOI : 10.1007/s00466-005-0731-0

E. Rapp, Patent no. US19580729815, 06 1960. Sandwich-type structural element

J. N. Reddy, A Simple Higher-Order Theory for Laminated Composite Plates, Journal of Applied Mechanics, vol.51, issue.4, pp.745-752, 1984.
DOI : 10.1115/1.3167719

J. N. Reddy, On refined computational models of composite laminates, International Journal for Numerical Methods in Engineering, vol.26, issue.2, pp.361-382, 1989.
DOI : 10.1002/nme.1620270210

E. Reissner, The effect of transverse shear deformation on the bending of elastic plates, Journal of Applied Mechanics, vol.12, pp.68-77, 1945.

E. Reissner, Reflections on the Theory of Elastic Plates, Applied Mechanics Reviews, vol.38, issue.11, pp.1453-1464, 1985.
DOI : 10.1115/1.3143699

E. Reissner and Y. Stavsky, Bending and Stretching of Certain Types of Heterogeneous Aeolotropic Elastic Plates, Journal of Applied Mechanics, vol.28, issue.3, pp.402-408, 1961.
DOI : 10.1115/1.3641719

K. Sab, Microscopic and macroscopic strains in a dense collection of rigid particles, Comptes Rendus de l'Academie Des Sciences Serie II Fascicule B-Mecanique Physique Chimie Astronomie, pp.715-721, 1996.

G. Shi and P. Tong, Equivalent transverse shear stiffness of honeycomb cores, International Journal of Solids and Structures, vol.32, issue.10, pp.1383-1393, 1995.
DOI : 10.1016/0020-7683(94)00202-8

S. Brique and . De-brock, Detail from a pleating mold, 2009.

T. Tachi, Generalization of rigid-foldable quadrilateral-mesh origami In: Journal of the International Association for Shell and Spatial Structures, Int. Association for Shell and Spatial Structures, vol.50, pp.173-179, 2009.

D. W. Thompson, On Growth and Form, 1917.

M. Touratier, An efficient standard plate theory, International Journal of Engineering Science, vol.29, issue.8, pp.901-916, 1991.
DOI : 10.1016/0020-7225(91)90165-Y

P. Vannucci and G. Verchery, Stiffness design of laminates using the polar method, International Journal of Solids and Structures, vol.38, issue.50-51, pp.50-51, 2001.
DOI : 10.1016/S0020-7683(01)00177-9

P. Vannucci and G. Verchery, A new method for generating fully isotropic laminates, Composite Structures, vol.58, issue.1, pp.75-82, 2002.
DOI : 10.1016/S0263-8223(02)00038-7

P. Vidal and O. Polit, A family of sinus finite elements for the analysis of rectangular laminated beams, Composite Structures, vol.84, issue.1, pp.56-72, 2008.
DOI : 10.1016/j.compstruct.2007.06.009
URL : https://hal.archives-ouvertes.fr/hal-01366982

V. Z. Vlasov, Thin-walled elastic beams. National Science Foundation and Department of Commerce, 1961.

H. Wadley, Cellular Metals Manufacturing, Advanced Engineering Materials, vol.4, issue.10, pp.726-733, 2002.
DOI : 10.1002/1527-2648(20021014)4:10<726::AID-ADEM726>3.0.CO;2-Y

J. Whitney, Cylindrical bending of unsymmetrically laminated plates, Journal of Composite Materials, vol.3, pp.715-719, 1969.

J. Whitney, The Effect of Transverse Shear Deformation on the Bending of Laminated Plates, Journal of Composite Materials, vol.3, issue.3, pp.534-547, 1969.
DOI : 10.1177/002199836900300316

J. Whitney, Stress Analysis of Thick Laminated Composite and Sandwich Plates, Journal of Composite Materials, vol.10, issue.3, pp.426-440, 1972.
DOI : 10.1177/002199837200600301

J. M. Whitney, A. W. Leissa, and . June, Analysis of Heterogeneous Anisotropic Plates, Journal of Applied Mechanics, vol.36, issue.2, pp.261-266, 1969.
DOI : 10.1115/1.3564618

N. Wicks and J. W. Hutchinson, Optimal truss plates, International Journal of Solids and Structures, vol.38, issue.30-31, pp.30-31, 2001.
DOI : 10.1016/S0020-7683(00)00315-2

T. Wierzbicki, Crushing analysis of metal honeycombs, International Journal of Impact Engineering, vol.1, issue.2, pp.157-174, 1983.
DOI : 10.1016/0734-743X(83)90004-0

X. F. Xu and P. Qiao, Homogenized elastic properties of honeycomb sandwich with skin effect, International Journal of Solids and Structures, vol.39, issue.8, pp.2153-2188, 2002.

X. F. Xu, P. Qiao, and J. F. Davalos, Transverse Shear Stiffness of Composite Honeycomb Core with General Configuration, Journal of Engineering Mechanics, vol.127, issue.11, pp.1144-1151, 2001.
DOI : 10.1061/(ASCE)0733-9399(2001)127:11(1144)

W. Yu, D. H. Hodges, and V. V. Volovoi, Asymptotic construction of Reissner-like composite plate theory with accurate strain recovery, International Journal of Solids and Structures, vol.39, issue.20, pp.5185-5203, 2002.
DOI : 10.1016/S0020-7683(02)00410-9

W. Yu, D. H. Hodges, and V. V. Volovoi, Asymptotic generalization of Reissner???Mindlin theory: accurate three-dimensional recovery for composite shells, Computer Methods in Applied Mechanics and Engineering, vol.191, issue.44, pp.5087-5109, 2002.
DOI : 10.1016/S0045-7825(02)00440-1

X. Yuan, Y. Tomita, and T. Andou, A micromechanical approach of nonlocal modeling for media with periodic microstructures, Mechanics Research Communications, vol.35, issue.1-2, pp.126-133, 2008.
DOI : 10.1016/j.mechrescom.2007.07.004

I. Zakirov, K. Alekseev, and G. Movchan, Influence of coating thickness on geometric parameters of a chevron core, Russian Aeronautics (Iz VUZ), vol.51, issue.3, pp.326-329, 2008.
DOI : 10.3103/S106879980803015X

I. Zakirov and K. Alekseyev, Determination of four-beam spiral folded structure parameters spiral folded structure;Folded core, Russian Aeronautics, vol.48, issue.4, pp.91-99, 2005.

I. Zakirov, K. Alekseyev, and C. Mudra, A technique for designing highly-stiffened chevron folded coresInternal structure;Stiffening, Russian Aeronautics, vol.49, issue.4, pp.1-7, 2006.

J. Zhang, J. Kundu, and R. M. Manglik, Effect of fin waviness and spacing on the lateral vortex structure and laminar heat transfer in wavy-plate-fin cores, International Journal of Heat and Mass Transfer, vol.47, issue.8-9, pp.1719-1730, 2004.
DOI : 10.1016/j.ijheatmasstransfer.2003.10.006