B. K. Bose, Power Electronics and AC Drive, 1986.

P. Vas, Vector Control of AC Machines, 1990.

W. Leonhard, Control of Electrical Drives, 1996.

F. Blaschke, The principle of field oriented as applied to the new Tran vector closed-loop control system for rotating machine, Siemens Review, vol.39, pp.4217-220, 1972.

K. Hasse, On the dynamics of speed control of a static AC drive with squirrel cage induction machine, 1979.

J. P. Caron and J. P. Hautier, Modélisation et commande de la machine asynchrone, 1995.

C. Canudas-de-wit, Commande des moteurs asynchrones " , Volume I et II, 2000.

R. D. Lorenz and D. W. Novotny, A control systems perspective of field oriented control for AC serve drives, Proceeding of Control Expo, vol.8812, pp.18-19, 1988.

D. Doncker and D. W. Novotny, The universal field oriented controller, IEEE Transactions on Industry Applications, vol.30, issue.1, pp.92-100, 1994.
DOI : 10.1109/28.273626

R. Marino, S. Peresada, and P. Valigi, Adaptive input-output linearizing control of induction motors, IEEE Transactions on Automatic Control, vol.38, issue.2, pp.208-221, 1993.
DOI : 10.1109/9.250510

R. Ortega and G. Espinoza, Torque regulation of induction motors, Automatica, vol.29, issue.3, pp.621-633, 1993.
DOI : 10.1016/0005-1098(93)90059-3

R. Ortega, On speed control of induction motors, Automatica, vol.32, issue.3, pp.455-460, 1996.
DOI : 10.1016/0005-1098(95)00171-9

V. Utkin, Sliding mode control design principles and applications to electric drives, IEEE Transactions on Industrial Electronics, vol.40, issue.1, pp.23-36, 1993.
DOI : 10.1109/41.184818

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.477.77

I. Kanellakopoulos, P. V. Kokotovic, and A. S. Morse, Systematic design of adaptive controllers for feedback linearizable systems, IEEE Transactions on Automatic Control, vol.36, issue.11, pp.1241-1253, 1991.
DOI : 10.1109/9.100933

P. V. Kokotovic, The joy of feedback: nonlinear and adaptive, IEEE Control Systems, vol.12, issue.3, pp.7-17, 1992.
DOI : 10.1109/37.165507

M. Krstic, I. Kannellakopoulos, and P. Kokotovic, Nonlinear and Adaptive Control Design, 1995.

Y. Jun-hua, W. Jie, and H. Yue-ming, Backstepping method and its applicatons to nonlinear robust control, Control and Decision, vol.17, pp.641-653, 2002.

M. R. Jovanovic and B. Bamieh, Architecture Induced by Distributed Backstepping Design, IEEE Transactions on Automatic Control, vol.52, issue.1, pp.108-113, 2007.
DOI : 10.1109/TAC.2006.886533

C. Kwan and F. L. Lewis, Robust backstepping control of nonlinear systems using neural networks, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans, vol.30, issue.6, pp.753-766, 2000.
DOI : 10.1109/3468.895898

L. Yahui, L. Guozhong, Z. Xianyi, and Q. Sheng, Adaptive backstepping control for induction motor based on neural networks and dynamic surface technique, Proceedings of IEEE Conference on Control Applications, pp.826-831, 2003.

Z. C. Ji and Y. X. Shen, Backstepping Position Control for Induction Motor based on Neural Network, 2006 1ST IEEE Conference on Industrial Electronics and Applications, pp.1-5, 2006.
DOI : 10.1109/ICIEA.2006.257383

J. Soltani and R. Yazdanpanah, Robust Backstepping Control of Induction Motor Drives Using Artificial Neural Networks, Proceedings of the 5 th IEEE International Conference on Power Electronics and Motion Control, pp.1-5, 2006.

H. Tan and J. Chang, Field Orientation and Adaptative Backstepping for Induction Motor Control, Thirty-Fourth IAS Annual Meeting, pp.2357-2363, 1999.
DOI : 10.1109/ias.1999.799172

S. Woo-nam and M. Nasir-uddin, Development of an Adaptive Backstepping Based Nonlinear Control of an Induction Motor Incorporating Iron Loss with Parameter Uncertainties, IEEE Canadian Conference on Electrical and Computer Enginnering, pp.1662-1666, 2006.

A. Laoufil, A. Hazzab, I. K. Bousserhanei, and M. Rahli, Direct Field-Oriented Control using Backstepping Technique for Induction Motor Speed Control, 2nd IEEE Conference on Information and Communication Technologies, pp.1422-1427, 2006.

Y. Tan, J. Chang, and H. Tan, Adaptive Backstepping Control and Friction Compensation for AC Servo With Inertia and Load Uncertainties, IEEE Transactions on Industrial Electronics, vol.50, issue.5, 2003.

M. , N. Uddin, and S. W. Nam, Adaptive Backstepping Based Online Loss Minimization Control of an IM Drive, IEEE Power Engineering Society General Meeting, 2007.

A. Ebrahim and G. Murphy, Adaptive Backstepping Control of a

L. Hou-tsan-lee, F. Fu, and . Lian, Sensorless Adaptive Backstepping Speed Control Of Induction Motor, Proceedings of the 45th IEEE Conference on Decision & Control, 2006.

Y. Tan, J. Chang, H. Tan, and J. Hu, Integral Backstepping Control and Experimental Implementation for motion system, Proceedings of the 2000 IEEE International Conference on Control Applications Anchorage, 2000.

J. Yu and J. Chang, A New Adaptive Backstepping Design for Motion Control Systems The 29th Annual Conference of the IEEE Industrial Electronics Society, pp.140-144, 2003.

G. Kenné, T. Ahmed-ali, F. Lamnabhi-lagarrigue, and A. Arzandé, Time-Varying Parameter Identification of a Class of Nonlinear Systems With Application to Online Rotor Resistance Estimation of Induction Motors, 2006 IEEE International Symposium on Industrial Electronics, pp.301-306, 2006.
DOI : 10.1109/ISIE.2006.295610

T. Kwon, M. Shin, and D. Hyun, Speed Sensorless Stator Flux-Oriented Control of Induction Motor in the Field Weakening Region Using Luenberger Observer, IEEE Transactions on Power Electronics, vol.20, issue.4, pp.864-869, 2005.
DOI : 10.1109/TPEL.2005.850939

Y. R. Kim, S. K. Sul, and M. H. Park, Speed sensorless vector control of an induction motor using an extended Kalman filter, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting, pp.1225-1233, 1994.
DOI : 10.1109/IAS.1992.244341

. Hori, Regenerating-mode low-speed operation of Sensorless induction motor drive with adaptive observer, IEEE Transaction on Industry Applications, vol.38, issue.4, pp.1081-1086, 2002.

R. Marino, P. Tomei, and C. M. Verrelli, A global tracking control for speed-sensorless induction motors, Automatica, vol.40, issue.6, pp.1071-1077, 2004.
DOI : 10.1016/j.automatica.2004.01.022

P. Vas, Sensorless Vector and Direct Torque Control, 1998.

J. Li, L. Xu, and Z. Zhang, An Adaptive Sliding-Mode Observer for Induction Motor Sensorless Speed Control, IEEE Transactions on Industry Applications, vol.41, issue.4, pp.1039-1046, 2005.
DOI : 10.1109/TIA.2005.851585

K. L. Shi, T. F. Shan, Y. K. Wong, and S. L. Ho, Speed estimation of an induction motor drive using an optimized extended Kalman filter, IEEE Transactions on Industrial Electronics, vol.49, issue.1, pp.124-133, 2002.
DOI : 10.1109/41.982256

A. Vicente-leite, R. E. Araujo, and D. Freitas, Full and reduced order extended Kalman filter for speed estimation in induction motor drives: A comparative study, 35 th Annual IEEE Power Electronics Specialists Conference, pp.2293-2299, 2004.

L. C. Zai, C. L. De-marco, and T. A. Lipo, An Extended Kalman Filter Approach to Rotor Time Constant Measurement in PWM Induction Motor Drives, IEEE Transaction on Industry Application, vol.28, issue.1, pp.96-104, 1992.

P. Vas, Parameter Estimation, Condition Monitoring and Diagnosis of Electrical Machines, 1993.

D. Atkinson, P. Acarnley, and J. W. Finch, Observers for induction motor state and parameter estimation, IEEE Transactions on Industry Applications, vol.27, issue.6, pp.1119-1127, 1991.
DOI : 10.1109/28.108463

M. N. Marwali and A. Keyhani, A comparative study of rotor flux based MRAS and back EMF based MRAS speed estimators for speed sensorless vector control of induction machines, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting, pp.160-166, 1997.
DOI : 10.1109/IAS.1997.643022

M. S. Nait-said and M. E. Benbouzid, Induction motors direct field oriented control with robust on-line tuning of rotor resistance, IEEE Transactions on Energy Conversion, vol.14, issue.4, 1999.
DOI : 10.1109/60.815025

URL : https://hal.archives-ouvertes.fr/hal-01052372

C. Schauder, Adaptive speed identification for vector control of induction motors without rotational transducers, IEEE Transactions on Industry Applications, vol.28, issue.5, pp.1054-1061, 1992.
DOI : 10.1109/28.158829

L. Zhen and L. Xu, Sensorless field orientation control of induction machines based on a mutual MRAS scheme, IEEE Transactions on Industrial Electronics, vol.45, issue.5, 1998.
DOI : 10.1109/41.720340

H. U. Rehman, A. Derdiyok, M. K. Guven, and . Xu, An MRAS scheme for on-line rotor resistance adaptation of an induction machine, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230), pp.817-822, 2001.
DOI : 10.1109/PESC.2001.954220

V. Vasic, S. N. Vukosavic, and E. Levi, A stator resistance estimation scheme for speed sensorless rotor flux oriented induction motor drives, IEEE Transactions on Energy Conversion, vol.18, issue.4, 2003.
DOI : 10.1109/TEC.2003.816595

R. Beguenane, M. A. Ouhrouche, and A. M. Trzynadlowski, Stator resistance tuning in an adaptive direct field-orientation induction motor drive at low speeds, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004, 2004.
DOI : 10.1109/IECON.2004.1433286

B. M. Dehkordi and M. Parastegari, A new observer for speed and rotor time constant estimation of an induction machine in vector control method, International Aegean Conference on Electrical Machines and Power Electronics (ACEMP '07), pp.409-414, 2007.

M. Djemai, J. Hernandez, and J. P. Barbot, Nonlinear control with flux observer for a singularly perturbed induction motor, Proceedings of 32nd IEEE Conference on Decision and Control, pp.3391-3396, 1993.
DOI : 10.1109/CDC.1993.325841

T. Floquet, Contributions à la commande par modes glissants d'ordre supérieur, Thèse de Doctorat, 2000.

T. Floquet and W. Perruquetti, Commande par mode glissant d'ordre deux pour la machine asynchrone, CIFA, vol.1, pp.477-482, 2000.

G. Kenné, F. Floret, H. Nkwawo, and F. Lamnabhi-lagarrigue, Real time electrical parameters and rotor flux estimation of induction motors using sliding mode observer approach, Proceeding Of the 16 th Int, pp.355-361, 2003.

G. Kenné, Méthodes d'identification pour des systèmes non linéaires avec paramètres variant dans le temps: Application aux machines tournantes a induction, Thèse de Doctorat de l'Université, 2003.

V. Utkin, J. Guldner, and J. Shi, Sliding Mode Control in Electromechanical Systems, 1999.

A. Benchaib, A. Rachid, E. Audrezet, and M. Tadjine, Real-time sliding-mode observer and control of an induction motor, IEEE Transactions on Industrial Electronics, vol.46, issue.1, pp.128-138, 1999.
DOI : 10.1109/41.744404

Y. Zheng, H. A. Fattah, and K. A. Loparo, Non-linear adaptive sliding mode observer-controller scheme for induction motors, International Journal of Adaptive Control and Signal Processing, vol.44, issue.2-3, pp.245-273, 2000.
DOI : 10.1002/(SICI)1099-1115(200003/05)14:2/3<245::AID-ACS578>3.0.CO;2-B

M. Tursini, R. Petrella, and F. Parasiliti, Adaptive sliding-mode observer for speed-sensorless control of induction motors, IEEE Transactions on Industry Applications, vol.36, issue.5, pp.1380-1387, 2000.
DOI : 10.1109/28.871287

H. Rehman, A. Derdiyok, M. K. Guven, and L. Xu, A new current model flux observer for wide speed range sensorless control of an induction machine, IEEE Transactions on Power Electronics, vol.17, issue.6, pp.1041-1048, 2002.
DOI : 10.1109/TPEL.2002.805579

A. Derdiyok, Speed-Sensorless Control of Induction Motor Using a Continuous Control Approach of Sliding-Mode and Flux Observer, IEEE Transactions on Industrial Electronics, vol.52, issue.4, pp.1170-1176, 2005.
DOI : 10.1109/TIE.2005.851594

A. Amuliu-bogdan-proca and . Keyhani, Sliding-Mode Flux Observer With Online Rotor Parameter Estimation for Induction Motors, IEEE Transactions on Industrial Electronics

E. V. Westerholt, Commande non linéaire d'une machine asynchrone, Thèse de doctorat, 1994.

I. Zein, Application du filtre de Kalman et du filtre de Luenberger à la commande et à la surveillance de la machine asynchrone, Thèse de doctorat, 2000.

T. Saheb, Commande sans capteur mécanique de la machine asynchrone, Thèse de doctorat, 2004.

M. Ghanes, Observation et commande de la machine asynchrone sans capteurs mécanique, Thèse de doctorat, 2005.

F. Malrait, Problèmes d'identification et d'observabilité du moteur à induction pour la variation de vitesse industrielle «sans capteur, Thèse de doctorat, 2001.

C. Canudas-de-wit, A. Youssef, J. P. Barbot, . Ph, F. Martin et al., Observability conditions of induction motors at low frequencies, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187), 2000.
DOI : 10.1109/CDC.2000.914093

J. Moreno and G. E. Perez, GLOBAL OBSERVABILITY ANALYSIS OF INDUCTION MOTORS UNDER SENSORLESS CONDITIONS, IFAC 15 th Triennial Word Congress, 2002.
DOI : 10.3182/20020721-6-ES-1901.00220

H. M. Kojabadi, L. Chang, and R. Doraiswami, A MRAS-Based Adaptive Pseudoreduced-Order Flux Observer for Sensorless Induction Motor Drives, IEEE Transactions on Power Electronics, vol.20, issue.4, 2005.
DOI : 10.1109/TPEL.2005.850969

J. Holtz, Sensorless control of induction motors-performance and limitations, ISIE'2000. Proceedings of the 2000 IEEE International Symposium on Industrial Electronics (Cat. No.00TH8543), 2000.
DOI : 10.1109/ISIE.2000.930474

M. Ghanes, J. Deleon, and A. Glumineau, Validation of an interconnected high-gain observer for a sensorless induction motor against a low frequency benchmark: application to an experimental setup, IEE Proceedings - Control Theory and Applications, vol.152, issue.4, pp.371-378, 2005.
DOI : 10.1049/ip-cta:20045073

M. Ghanes, J. Deleon, and A. Glumineau, EXPERIMENTAL RESULTS OF A CASCADE OBSERVER FOR SENSORLESS INDUCTION MOTOR ON LOW FREQUENCIES BENCHMARK, IFAC World Congress, 2005.
DOI : 10.3182/20050703-6-CZ-1902.01235

C. Lu, Y. Liu, X. Bao, Y. Zhang, and J. Ying, Considerations of Stator Resistance Onlinetuning Method for MRAS-based Speed Sensorless Induction Motor Drive, IEEE International Conference on Electric Machines & Drives Conference (IEMDC '07), pp.1142-1147, 2007.

M. S. Zaky, M. M. Khater, H. Yasin, and S. S. Shokralla, Speed and stator resistance identification schemes for a low speed sensorless induction motor drive, 2008 12th International Middle-East Power System Conference, pp.96-102, 2008.
DOI : 10.1109/MEPCON.2008.4562407

H. Kubota, I. Sato, Y. Tamura, K. Matsuse, H. Ohta et al., Regenerating-mode low-speed operation of sensorless induction motor drive with adaptive observer, IEEE Transactions on Industry Applications, vol.38, issue.4, 2002.
DOI : 10.1109/TIA.2002.800575

K. K. Shyu, L. J. Shang, H. Z. Chen, and K. W. Jwo, Flux Compensated Direct Torque Control of Induction Motor Drives for Low Speed Operation, IEEE Transactions on Power Electronics, vol.19, issue.6, 2004.
DOI : 10.1109/TPEL.2004.836618

E. D. Mitronikas and A. N. Safacas, An Improved Sensorless Vector-Control Method for an Induction Motor Drive, IEEE Transactions on Industrial Electronics, vol.52, issue.6, 2005.
DOI : 10.1109/TIE.2005.858706

K. Ohyama, G. Asher, and M. Sumner, Experimental performance evaluation for low speed and regenerating operation of sensor-less vector control system of induction motor using observer gain tuning, 13th Power Electronics and Motion Control Conference (EPE-PEMC 2008), pp.2300-2305, 2008.

J. Zhang, Direct Torque Controlled Induction Machines For Integrated Starter/Alternator System, 2006.

J. Holtz and J. Quan, Sensorless Vector Control of Induction Motors at Very Low Speed Using a Nonlinear Inverter Model and Parameter Identification, IEEE Transactions on Industry Applications, vol.38, issue.4, 2002.

J. Holtz and J. Quan, Drift-and Parameter-Compensed Flux Estimator for Persistent Zero-Stator-Frequency Operation of Sensorless-Controlled Induction Motors, IEEE Transactions on Industry Applications, vol.39, issue.4, 2003.

S. Bolognani, L. Peretti, and M. Zigliotto, Parameter Sensitivity Analysis of an Improved Open-Loop Speed Estimate for Induction Motor Drives, IEEE Transaction on Power Electronics, vol.23, issue.4, 2008.

S. Bolognani, L. Peretti, and M. Zigliotto, Repetitive-Control-Based Self-Commissioning Procedure for Inverter Nonidealities Compensation, IEEE Transactions on Industry Applications, vol.44, issue.5, 2008.
DOI : 10.1109/TIA.2008.2002280

X. Xu and D. W. Novotny, Selection of the flux reference for induction machine drives in the field weakening region, IEEE Transactions on Industry Applications, vol.28, issue.6, 1992.
DOI : 10.1109/28.175288

T. Mohammed, Commande par linéarisation exacte d'une machine asynchrone en régime défluxé, Thèse de doctorat, 1997.

M. Bodson and J. Chiasson, A systematic approach to selecting optimal flux references in induction motors, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting, pp.531-537, 1992.
DOI : 10.1109/IAS.1992.244350

S. Kim and S. Sul, Voltage control strategy for maximum torque operation of an induction machine in the field-weakening region, IEEE Transactions on Industrial Electronics, vol.44, issue.4, pp.512-518, 1997.

M. Z. Ahmed and N. R. Idris, Overmodulation and Field Weakening in Direct Torque Control of Induction Motor Drives, First International Power and Energy Conference, 2006.

M. Ehsani, K. M. Rahman, and H. A. Toliyat, Propulsion system design of electric and hybrid vehicles, IEEE Transactions on Industrial Electronics, vol.44, issue.1, pp.19-27, 1997.
DOI : 10.1109/41.557495

J. F. Lutz and B. R. Patel, Performance comparaison of a 100kw brushless PM and induction motor system, Proceeding of 14th Electric Vehicle Symposium, pp.1-9, 1997.

T. Marcic, G. Stumberger, M. Hadziselimovic, and I. Zagradisnik, Analysis of Induction Motor Drive Losses in the Field-Weakening Region, IEEE Conference on EPE-PEMC, 2006.

R. D. Lorenz and S. Yang, Efficiency-optimized flux trajectories for closed-cycle operation of field-orientation induction machine drives, IEEE Transactions on Industry Applications, vol.28, issue.3, pp.574-580, 1992.
DOI : 10.1109/28.137441

G. Kim, I. Ha, and M. Ko, Control of induction motors for both high dynamic performance and high power efficiency, Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation, pp.323-333, 1992.
DOI : 10.1109/IECON.1991.239188

D. De-almeida-souza, W. C. De-aragao-filho, and G. C. Sousa, Adaptive Fuzzy Controller for Efficiency Optimization of Induction Motors, IEEE Transactions on Industrial Electronics, vol.54, issue.4, pp.2157-2164, 2007.
DOI : 10.1109/TIE.2007.895138

G. O. Garcia, J. C. Luis, R. M. Stephan, and E. H. Watanabe, An efficient controller for an adjustable speed induction motor drive, IEEE Transactions on Industrial Electronics, vol.41, issue.5, pp.533-539, 1994.
DOI : 10.1109/41.315272

J. C. Moreira, T. A. Lipo, and V. Blasko, Simple efficiency maximizer for an adjustable frequency induction motor drive, IEEE Transactions on Industry Applications, vol.27, issue.5, 1991.
DOI : 10.1109/28.90351

C. Chakraborty and Y. Hori, Fast efficiency optimization techniques for the indirect vector-controlled induction motor drives, IEEE Transactions on Industry Applications, vol.39, issue.4, 2003.
DOI : 10.1109/TIA.2003.814550

P. C. Krauss, Analysis of Electric machinery, 1995.

P. Kokotovic, H. K. Khalil, and J. O. Reilly, Singular Perturbation Method in Control ? Analysis and Design, Classics In Applied Mathematics, 1999.
DOI : 10.1137/1.9781611971118

A. Ricardo and . Salas, Développement de lois de commandes avec observateurs pour machine asynchrone, Thèse de doctorat, INPG, 2002.

H. Michael, Application des outils du traitement du signal à la commande des machines tournantes, Thèse de doctorat, 2001.

F. Morand, Techniques d'observation sans capteurs de vitesse en vue de la commande des machines asynchrones, Thèse de doctorat, 2005.

. Baghli, Contribution à la commande de la machine asynchrone, utilisation de la logique floue, des réseaux de neurones et des algorithmes génétiques, Thèse de doctorat, 1999.

. Abder-rezak-benaskeur, Aspects de l'application du backstepping adaptatif à la commande décentralisée des systèmes non linéaires, Thèse Ph.D, 2000.

F. Mehazzem, A. Reama, Y. Hamam, and H. Benalla, Real time implementation of backstepping controller in indirect field oriented control of induction motor drive, 2009 International Conference on Power Engineering, Energy and Electrical Drives, 2009.
DOI : 10.1109/POWERENG.2009.4915198

T. Matsuo and T. A. Lipo, A Rotor Parameter Identification Scheme for Vector-Controlled Induction Motor Drives, IEEE Transactions on Industry Applications, vol.21, issue.3, pp.624-632, 1985.
DOI : 10.1109/TIA.1985.349719

H. A. Toliyat, E. Levi, and M. Raina, A review of RFO induction motor parameter estimation techniques, IEEE Transactions on Energy Conversion, vol.18, issue.2, pp.271-283, 2003.
DOI : 10.1109/TEC.2003.811719

D. P. Mar?ceti and S. N. Vukosavi´, Speed-Sensorless ac drives with the rotor time constant parameter update, IEEE Transactions on Industrial Electronics, vol.54, issue.5, pp.2618-2625, 2007.

K. Wang, J. Chiasson, M. Bodson, and L. M. Tolbert, An Online Rotor Time Constant Estimator for the Induction Machine, IEEE Transactions on Control Systems Technology, vol.15, issue.2, pp.339-348, 2007.
DOI : 10.1109/TCST.2006.886445

M. Cirrincione, M. Pucci, G. Cirrincione, and G. Capolino, A new experimental application of least-squares techniques for the estimation of the induction motor parameters, IEEE Transactions on Industry Applications, vol.39, issue.5, pp.1247-1256, 2003.
DOI : 10.1109/TIA.2003.816565

B. Karanayil, M. F. Rahman, and C. Grantham, Online Stator and Rotor Resistance Estimation Scheme Using Artificial Neural Networks for Vector Controlled Speed Sensorless Induction Motor Drive, IEEE Transactions on Industrial Electronics, vol.54, issue.1, pp.167-176, 2007.
DOI : 10.1109/TIE.2006.888778

M. Wlas, Z. Krzemi´nski, and H. A. Toliyat, Neural-Network-Based parameter estimations of induction motors, IEEE Transaction on Industrial Electronics, vol.55, issue.4, pp.1783-1794, 2008.

J. W. Finch, D. J. Atkinson, and P. P. Acarnley, Full-order estimator for induction motor states and parameters, IEE Proceedings - Electric Power Applications, vol.145, issue.3, pp.169-179, 1998.
DOI : 10.1049/ip-epa:19981634

P. Syam, P. K. Nandy, and A. K. Chattopadhyay, Improvement in power quality and a simple method of subharmonic suppression for a cycloconverter-fed synchronous motor drive, IEE Proc. B, EPA, pp.4-292, 2002.
DOI : 10.1049/ip-epa:20020298

J. Stephen, M. Bodson, and J. Chiasson, Real-time estimation of the parameters and fluxes of induction motors, IEEE Transactions on Industry Applications, vol.30, issue.3, pp.746-759
DOI : 10.1109/28.293725

R. Marino, P. Peresada, and . Tomei, Exponentially convergent rotor resistance estimation for induction motors, IEEE Transactions on Industrial Electronics, vol.42, issue.5, pp.508-515, 1994.
DOI : 10.1109/41.464614

D. S. Kirshen, Optimal Efficiency Control of Induction Machines, 1985.

A. B. Proca, Induction motor Control For Hybrid Electric Vehicle Applications, 2001.

. Habib-ur-rehman, On The Analysis, Estimation and Control of Field Oriented Induction Motor Drives, 2001.

K. Mustafa and . Guven, Sensorless Control of Indirect Field Oriented Induction Machine Drives, 2001.

J. Li, Adaptive Sliding Mode Observer and Loss Minimization for Sensorless Field Orientation Control of Induction Machine, 2005.

M. Comanescu, Flux and Speed Estimation Techniques for Sensorless Control of Induction Motors, 2005.

R. Ali-rèza, Contribution à la commande Décentralisée non linéaire des Réseaux Electriques, INPG, 2007.

L. Praly, An introduction to some Lyapunov designs of global asymptotic stabilizers " , Part 1, Lecture notes, HYCON-EECI Graduate School on Control, 2009.

J. Hu and B. Wu, New integration algorithms for estimating motor flux over a wide speed range, PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972, 1998.
DOI : 10.1109/PESC.1997.616875

S. Tacholess and I. , Simply a Matter of Stator Voltage Integration, IEEE Transactions on Industry Applications, vol.34, issue.4, 1998.

J. Chiasson, Non Linear Controllers For Induction Motors, IFAC Conference System Structure and Control, 1995.

R. Beguenane, M. Benbouzid, M. Tadjine, and A. Tayebi, Speed and rotor time constant estimation via MRAS strategy for induction motor drives, 1997 IEEE International Electric Machines and Drives Conference Record, 1997.
DOI : 10.1109/IEMDC.1997.604233

N. Mohan, T. M. Undeland, and W. P. Robbins, Power Electronics Converters, Applications, and Design, 2003.

F. Mehazzem, P. Syam, A. Reama, and H. Benalla, Online Estimation of the Rotor Resistance of Induction Motor Using a Synchronous Resonating Filter, International Review of Electrical Engineering Journal (IREE), 2008.