. Abaqus, Reference manuals v6, 2008.

A. R. Akisanya and N. A. Fleck, Plastic collapse of thin-walled frusta and egg-box material under shear and normal loading, International Journal of Mechanical Sciences, vol.48, issue.7, pp.799-808, 2006.
DOI : 10.1016/j.ijmecsci.2006.01.020

H. G. Allen, Analysis and design of structural sandwich panels, 1969.

H. Aretz, Applications of a new plane stress yield function to orthotropic steel and aluminium sheet metals, Modelling and Simulation in Materials Science and Engineering, vol.12, issue.3, pp.491-509, 2004.
DOI : 10.1088/0965-0393/12/3/010

H. Aretz, A non-quadratic plane stress yield function for orthotropic sheet metals, Journal of Materials Processing Technology, vol.168, issue.1, pp.1-9, 2005.
DOI : 10.1016/j.jmatprotec.2004.10.008

H. Aretz, A simple isotropic-distortional hardening model and its application in elastic???plastic analysis of localized necking in orthotropic sheet metals, International Journal of Plasticity, vol.24, issue.9, pp.1457-1480, 2008.
DOI : 10.1016/j.ijplas.2007.10.002

M. F. Ashby, A. G. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson et al., Metal Foams: A Design Guide, 2000.

H. Bart-smith, A. F. Bastawros, and D. R. Mumm, Compressive deformation and yielding mechanisms in cellular Al alloys determined using X-ray tomography and surface strain mapping, Acta Materialia, vol.46, issue.10, pp.3583-3592, 1998.
DOI : 10.1016/S1359-6454(98)00025-1

A. F. Bastawros, H. Bart-smith, and A. G. Evans, Experimental analysis of deformation mechanisms in a closed-cell aluminum alloy foam, Journal of the Mechanics and Physics of Solids, vol.48, issue.2, pp.301-322, 2000.
DOI : 10.1016/S0022-5096(99)00035-6

B. B. Basily and E. A. Elsayed, A continuous folding process for sheet materials, International Journal of Materials and Product Technology, vol.21, pp.217-238, 2004.

B. B. Basily and E. A. Elsayed, Dynamic axial crushing of multilayer core structures of folded Chevron patterns, International Journal of Materials and Product Technology, vol.21, issue.1/2/3, pp.169-185, 2004.
DOI : 10.1504/IJMPT.2004.004750

C. Besse and D. Mohr, Optimization of the Effective Shear Properties of a Bi-directionally Corrugated Sandwich Core Structure

C. Besse and D. Mohr, Plasticity of formable all-metal sandwich sheets: Virtual experiments and constitutive modeling, International Journal of Solids and Structures, vol.49, issue.19-20
DOI : 10.1016/j.ijsolstr.2012.04.032
URL : https://hal.archives-ouvertes.fr/hal-00826128

T. Bitzer, Honeycomb Technology, 1997.
DOI : 10.1007/978-94-011-5856-5

W. J. Cantwell and P. Davies, A study of skin-core adhesion in glass fibre reinforced sandwich materials, Applied Composite Materials, vol.13, issue.6, pp.407-420, 1996.
DOI : 10.1007/BF00133683

A. Carrado, J. Faerber, and S. Niemeyer, Metal/polymer/metal hybrid systems: Towards potential formability applications, Composite Structures, vol.93, issue.2, pp.715-721, 2011.
DOI : 10.1016/j.compstruct.2010.07.016

O. Caty, E. Maire, S. Youssef, and R. Bouchet, Modeling the properties of closed-cell cellular materials from tomography images using finite shell elements, Acta Materialia, vol.56, issue.19, pp.5524-5534, 2008.
DOI : 10.1016/j.actamat.2008.07.023

S. Chiras, D. R. Mumm, A. G. Evans, N. Wicks, J. W. Hutchinson et al., The structural performance of near-optimized truss core panels, International Journal of Solids and Structures, vol.39, issue.15, pp.4093-4115, 2002.
DOI : 10.1016/S0020-7683(02)00241-X

S. Demiray, W. Becker, and J. Hohe, Numerical determination of initial and subsequent yield surfaces of open-celled model foams, International Journal of Solids and Structures, vol.44, issue.7-8, pp.7-8, 2007.
DOI : 10.1016/j.ijsolstr.2006.06.044

V. S. Deshpande and N. A. Fleck, Isotropic constitutive models for metallic foams, Journal of the Mechanics and Physics of Solids, vol.48, issue.6-7, pp.1253-1283, 2000.
DOI : 10.1016/S0022-5096(99)00082-4

V. S. Deshpande and N. A. Fleck, Collapse of truss core sandwich beams in 3-point bending, International Journal of Solids and Structures, vol.38, issue.36-37, pp.6275-6305, 2001.
DOI : 10.1016/S0020-7683(01)00103-2

T. Dillard, F. Nguyen, E. Maire, S. Forest, Y. Bienvenu et al., 3D quantitative image analysis of open-cell nickel foams under tension and compression loading using X-ray microtomography, Philosophical Magazine, vol.11, issue.19, pp.2147-2175, 2005.
DOI : 10.1103/PhysRevE.53.6181
URL : https://hal.archives-ouvertes.fr/hal-00154842

P. Eggertsen and K. Mattiasson, An efficient inverse approach for material hardening parameter identification from a three-point bending test, Engineering with Computers, vol.97, issue.2, pp.159-170, 2010.
DOI : 10.1007/s00366-009-0149-y

A. G. Evans, J. W. Hutchinson, and M. F. Ashby, Multifunctionality of cellular metal systems, Progress in Materials Science, vol.43, issue.3, pp.171-221, 1998.
DOI : 10.1016/S0079-6425(98)00004-8

A. G. Evans, J. W. Hutchinson, N. A. Fleck, M. F. Ashby, and H. N. Wadley, The topological design of multifunctional cellular metals, Progress in Materials Science, pp.309-327, 2001.
DOI : 10.1016/S0079-6425(00)00016-5

L. Gibson and M. Ashby, Cellular solids: Structure and properties, 1988.
DOI : 10.1017/CBO9781139878326

L. Gong, S. Kyriakides, and W. Y. Jang, Compressive response of open-cell foams. Part I: Morphology and elastic properties, International Journal of Solids and Structures, vol.42, issue.5-6, pp.1355-1379, 2005.
DOI : 10.1016/j.ijsolstr.2004.07.023

M. Grediac, A finite element study of the transverse shear in honeycomb cores, International Journal of Solids and Structures, vol.30, issue.13, pp.77-88, 1993.
DOI : 10.1016/0020-7683(93)90233-W

A. L. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977.
DOI : 10.1115/1.3443401

R. N. Gustafsson, Ultralight stainless steel sandwich materials-HSSA, Sandwich construction 5, EMAS, pp.169-176, 2000.

. Hale, Anticlastic cellular core structure having biaxial rectilinear truss patterns, 1960.

S. Heimbs, P. Middendorf, S. Kilchert, A. Johnson, and M. Maier, Experimental and Numerical Analysis of Composite Folded Sandwich Core Structures Under Compression, Applied Composite Materials, vol.67, issue.13, pp.363-377, 2007.
DOI : 10.1007/s10443-008-9051-9

R. G. Hutchinson and N. A. Fleck, The structural performance of the periodic truss, Journal of the Mechanics and Physics of Solids, vol.54, issue.4, pp.756-782, 2006.
DOI : 10.1016/j.jmps.2005.10.008

K. R. Jackson, J. M. Allwood, and M. Landert, Incremental forming of sandwich panels, Journal of Materials Processing Technology, vol.204, pp.1-3, 2008.

S. Kelsey, R. A. Gellatly, and B. W. Clark, The shear modulus of foil honeycomb cores, Aircraft Engineering, pp.294-302, 1958.

K. J. Kim, D. Kim, S. H. Choi, K. Chunga, K. S. Shin et al., Formability of AA5182/polypropylene/AA5182 sandwich sheets, Journal of Materials Processing Technology, vol.139, issue.1-3, pp.1-7, 2003.
DOI : 10.1016/S0924-0136(03)00173-0

M. Kintscher, L. Karger, A. Wetzel, and D. Hartung, Stiffness and failure behaviour of folded sandwich cores under combined transverse shear and compression, Composites Part A: Applied Science and Manufacturing, vol.38, issue.5, pp.1288-1295, 2007.
DOI : 10.1016/j.compositesa.2006.11.008

T. Lauwagie, H. Sol, W. Heylen, and G. Roebben, Determination of the in-plane elastic properties of the different layers of laminated plates by means of vibration testing and model updating, Journal of Sound and Vibration, vol.274, issue.3-5, pp.529-546, 2004.
DOI : 10.1016/j.jsv.2003.05.023

A. Lebée and K. Sab, Transverse shear stiffness of a chevron folded core used in sandwich construction, International Journal of Solids and Structures, vol.47, issue.18-19, pp.18-19, 2010.
DOI : 10.1016/j.ijsolstr.2010.05.024

M. H. Luxner, J. Stampfl, and H. E. Pettermann, Nonlinear simulations on the interaction of disorder and defects in open cell structures, Computational Materials Science, vol.47, issue.2, pp.418-428, 2009.
DOI : 10.1016/j.commatsci.2009.09.003

J. S. Liu and T. J. Lu, Multi-objective and multi-loading optimization of ultralight weight truss materials, International Journal of Solids and Structures, vol.41, pp.618-635, 2004.

T. Liu, Z. C. Deng, and T. J. Lu, Design optimization of truss-cored sandwiches with homogenization, International Journal of Solids and Structures, vol.43, issue.25-26, pp.7891-7918, 2006.
DOI : 10.1016/j.ijsolstr.2006.04.010

A. E. Markaki and T. W. Clyne, Mechanics of thin ultra-light stainless steel sandwich sheet material, Acta Materialia, vol.51, issue.5, pp.1341-1350, 2003.
DOI : 10.1016/S1359-6454(02)00528-1

R. K. Mcfarland, Hexagonal Cell Structures Under Post-Buckling Axial Load, AIAA Journal, vol.1, issue.6, 1963.

W. K. Miller, Metal-Plastic laminates for Vehicle Weight Reduction, SAE Technical Paper Series, pp.481-490, 1981.
DOI : 10.4271/800077

D. Mohr and M. Doyoyo, Large plastic deformation of metallic honeycomb: orthotropic rate-independent constitutive model, International Journal of Solids and Structures, vol.41, issue.16-17, pp.16-17, 2004.
DOI : 10.1016/j.ijsolstr.2004.02.062

D. Mohr, Mechanism-based multi-surface plasticity model for ideal truss lattice materials, International Journal of Solids and Structures, vol.42, issue.11-12, pp.11-12, 2005.
DOI : 10.1016/j.ijsolstr.2004.10.032

D. Mohr, On the role of shear strength in sandwich sheet forming, International Journal of Solids and Structures, vol.42, issue.5-6, pp.5-6, 2005.
DOI : 10.1016/j.ijsolstr.2004.07.012

D. Mohr and G. Straza, Development of Formable All-Metal Sandwich Sheets for Automotive Applications, Advanced Engineering Materials, vol.42, issue.4, pp.243-246, 2005.
DOI : 10.1002/adem.200400216

D. Mohr, Multi-scale finite-strain plasticity model for stable metallic honeycombs incorporating microstructural evolution, International Journal of Plasticity, vol.22, issue.10, pp.1899-1923, 2006.
DOI : 10.1016/j.ijplas.2006.01.004
URL : https://hal.archives-ouvertes.fr/hal-00111456

E. Omerspahic, K. Mattiasson, and B. Enqvist, Identification of material hardening parameters by three-point bending of metal sheets, International Journal of Mechanical Sciences, vol.48, issue.12, pp.1525-1532, 2006.
DOI : 10.1016/j.ijmecsci.2006.05.009

M. Ortiz and E. P. Popov, distortional Hardening Rules for Metal Plasticity, Journal of Engineering Mechanics, vol.109, issue.4, pp.1042-1057, 1983.
DOI : 10.1061/(ASCE)0733-9399(1983)109:4(1042)

H. Palkowski and G. Lange, Herstellung und Umformverhalten austenitischer Polymerkernsandwichverbunde, Materialwissenschaft und Werkstofftechnik, vol.38, issue.2, pp.85-89, 2007.
DOI : 10.1002/mawe.200600111

S. D. Papka and S. Kyriakides, In-plane compressive response and crushing of honeycomb, Journal of the Mechanics and Physics of Solids, vol.42, issue.10, pp.1499-1532, 1994.
DOI : 10.1016/0022-5096(94)90085-X

M. H. Parsa, S. Ettehad, and M. , Experimental and finite element study on the spring back of double curved aluminum/polypropylene/aluminum sandwich sheet, Materials & Design, vol.31, issue.9, pp.4174-4183, 2010.
DOI : 10.1016/j.matdes.2010.04.024

R. Pearce, Sheet Metal Forming, 1991.

D. T. Queheillalt and H. N. Wadley, Cellular metal lattices with hollow trusses, Acta Materialia, vol.53, issue.2, pp.303-313, 2005.
DOI : 10.1016/j.actamat.2004.09.024

M. Rébillat and X. Boutillon, Identification of elastic and damping properties of sandwich structures based on high resolution modal analysis of point measurements, 2010.

M. Rébillat and X. Boutillon, Measurement of relevant elastic and damping material properties in sandwich thick plates, Journal of Sound and Vibration, vol.330, issue.25, pp.6098-6121, 2011.
DOI : 10.1016/j.jsv.2011.07.015

M. Ridha and V. P. Shim, Microstructure and Tensile Mechanical Properties of Anisotropic Rigid Polyurethane Foam, Experimental Mechanics, vol.45, issue.308, pp.63-776, 2008.
DOI : 10.1007/s11340-008-9146-0

J. Savoie, J. J. Jonas, S. R. Macewen, and R. Perrin, Value During the Tensile Deformation of Aluminium, Textures and Microstructures, vol.23, issue.3, pp.149-171, 1995.
DOI : 10.1155/TSM.23.149

D. Y. Seong, C. G. Jung, D. Y. Yang, J. Ahn, S. J. Na et al., Analysis of core shear stress in welded deformable sandwich plates to prevent de-bonding failure during U-bending, Journal of Materials Processing Technology, vol.210, issue.9, pp.1171-1179, 2010.
DOI : 10.1016/j.jmatprotec.2010.02.026

D. Y. Seong, C. G. Jung, D. Y. Yang, J. H. Kim, W. J. Chung et al., Bendable metallic sandwich plates with a sheared dimple core, Scripta Materialia, vol.63, issue.1, pp.81-84, 2010.
DOI : 10.1016/j.scriptamat.2010.03.022

D. Y. Seong, C. G. Jung, D. Y. Yang, K. J. Moon, and D. G. Ahn, Quasi-isotropic bending responses of metallic sandwich plates with bi-directionally corrugated cores, Materials & Design, vol.31, issue.6, pp.31-2804, 2010.
DOI : 10.1016/j.matdes.2010.01.009

Y. Shi, H. Sol, and H. Hua, Material parameter identification of sandwich beams by an inverse method, Journal of Sound and Vibration, vol.290, issue.3-5, pp.1234-1255, 2006.
DOI : 10.1016/j.jsv.2005.05.026

T. B. Stoughton and J. W. Yoon, Anisotropic hardening and non-associated flow in proportional loading of sheet metals, International Journal of Plasticity, vol.25, issue.9, pp.1777-1817, 2009.
DOI : 10.1016/j.ijplas.2009.02.003

G. C. Straza, Formed core sandwich structure and method and system for making same, 2007.

P. J. Tan, S. R. Reid, J. J. Harrigan, Z. Zou, and S. Li, Dynamic compressive strength properties of aluminium foams. Part I???experimental data and observations, Journal of the Mechanics and Physics of Solids, vol.53, issue.10, pp.2174-2205, 2005.
DOI : 10.1016/j.jmps.2005.05.007

P. J. Tan, S. R. Reid, J. J. Harrigan, Z. Zou, and S. Li, Dynamic compressive strength properties of aluminium foams. Part II??????shock??? theory and comparison with experimental data and numerical models, Journal of the Mechanics and Physics of Solids, vol.53, issue.10, pp.2206-2230, 2005.
DOI : 10.1016/j.jmps.2005.05.003

S. Tokura and I. Hagiwara, A Study for the Influence of Work Hardening on Bending Stiffness of Truss Core Panel, Journal of Applied Mechanics, vol.77, issue.3, pp.1-6, 2010.
DOI : 10.1115/1.4000419

N. Triantafyllidis and M. W. Schraad, Onset of failure in aluminum honeycombs under general in-plane loading, Journal of the Mechanics and Physics of Solids, vol.46, issue.6, pp.1089-1124, 1998.
DOI : 10.1016/S0022-5096(97)00060-4

M. Vural and G. Ravichandran, Microstructural aspects and modeling of failure in naturally occurring porous composites, Mechanics of Materials, vol.35, issue.3-6, pp.3-6, 2003.
DOI : 10.1016/S0167-6636(02)00268-5

N. Wicks and J. W. Hutchinson, Optimal truss plates, International Journal of Solids and Structures, vol.38, issue.30-31, pp.5165-5183, 2001.
DOI : 10.1016/S0020-7683(00)00315-2

T. Wierzbicki and W. Abramowicz, On the Crushing Mechanics of Thin-Walled Structures, Journal of Applied Mechanics, vol.50, issue.4a, pp.4-727, 1983.
DOI : 10.1115/1.3167137

Z. Xue and J. W. Hutchinson, Constitutive model for quasi-static deformation of metallic sandwich cores, International Journal for Numerical Methods in Engineering, vol.2, issue.13, pp.2205-2238, 2004.
DOI : 10.1002/nme.1142

Z. Xue, A. Vaziri, and J. W. Hutchinson, Non-uniform hardening constitutive model for compressible orthotropic materials with application to sandwich plate cores, Comput. Model. Eng. Sci, vol.10, issue.1, pp.79-96, 2005.

S. Youssef, E. Maire, and R. Gaertner, Finite element modelling of the actual structure of cellular materials determined by X-ray tomography, Acta Materialia, vol.53, issue.3, pp.719-730, 2005.
DOI : 10.1016/j.actamat.2004.10.024
URL : https://hal.archives-ouvertes.fr/hal-00436799

D. Zenkert, An Introduction to Sandwich Construction, Engineering Materials Advisory Services Ltd, 1995.

M. Zupan, C. Chen, and N. A. Fleck, The plastic collapse and energy absorption capacity of egg-box panels, International Journal of Mechanical Sciences, vol.45, issue.5, pp.851-871, 2003.
DOI : 10.1016/S0020-7403(03)00136-X