D. S. Pundhir and P. B. Sharma, A Study of Aerodynamic Performance of a Contra Rotating Axial Compressor Stage, Defence Science Journal, vol.42, issue.3, pp.191-199, 1992.
DOI : 10.14429/dsj.42.4381

T. Shigemitsu, J. Fukutomi, and T. Agawa, Internal Flow Condition of High Power Contra-Rotating Small-Sized Axial Fan, International Journal of Fluid Machinery and Systems, vol.6, issue.1, pp.25-32, 2013.
DOI : 10.5293/IJFMS.2013.6.1.025

C. Mistry and A. Pradeep, Effect of variation in axial spacing and rotor speed combinations on the performance of a high aspect ratio contra-rotating axial fan stage, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, vol.227, issue.2, pp.138-146, 2012.
DOI : 10.1177/0957650912467453

L. Cao, S. Watanabe, S. Momosaki, T. Imanishi, and A. Furukawa, Low Speed Design of Rear Rotor in Contra-Rotating Axial Flow Pump, International Journal of Fluid Machinery and Systems, vol.6, issue.2, pp.105-112, 2013.
DOI : 10.5293/IJFMS.2013.6.2.105

H. Nouri, ??tude exp??rimentale de l'??coulement et de l'interaction entre deux rotors contrarotatifs subsoniques, Thèse de doctorat, Arts et Métiers Paristech, 2012.
DOI : 10.1051/lhb/2014023

URL : http://hdl.handle.net/10985/8509

H. Nouri, A. Danlos, F. Ravelet, F. Bakir, and C. , Experimental Study of the Instationary Flow Between Two Ducted Counter-Rotating Rotors, Journal of Engineering for Gas Turbines and Power, vol.135, issue.2, p.22601, 2013.
DOI : 10.1115/1.4007756

URL : https://hal.archives-ouvertes.fr/hal-00713761

A. Erian and . Baskharone, Principles of Turbomachinery in Air-Breathing Engines, 2006.

T. Köktürk, Design and performance analysis of a reversible axial flow ran, Thèse de doctorat, 2005.

R. Rey, Aero-hydrodynamique interne des machines tome ||. Profiles, grilles d'aubes et machines axials

G. Henning and A. Sohn, Stall and parallel operation, 6th International Conference-Tunnel Safety and Ventilation

J. E. Hatch, C. C. Giaxnati, and R. J. Jackson, Application of radial-equilibrium condition to axial-flow turbomachine design including consideration of change of entropy with radius downstream of blade row, 1954.

A. J. Wennerstrom, Design of highly loaded axial-flow fans and compressors, Concepts ETI, Inc, 2000.

N. Courtiade, Experimental analysis of the unsteady flow and instabilities in a high-speed multistage compressor, Thèse de doctorat, 2012.
URL : https://hal.archives-ouvertes.fr/tel-00838695

A. J. Sanders, J. Papalia, and S. Fleeter, Multi-blade row interactions in a transonic axial compressor part i: Stator particle image velocimetry (piv) investigation, ASME, vol.124, pp.10-18, 2002.

T. Behr, Control of Rotor Tip Leakage and Secondary Flow by Casing Air Injection in Unshrouded Axial Turbines, Thèse de doctorat, 2007.

J. Xu, C. Tan, H. Chen, Y. Zhu, and D. Zhang, Influence of tip clearance on performance of a contra-rotating fan, Journal of Thermal Science, vol.115, issue.3, pp.207-214, 2009.
DOI : 10.1007/s11630-009-0207-1

J. D. Denton, The 1993 IGTI Scholar Lecture: Loss Mechanisms in Turbomachines, Journal of Turbomachinery, vol.115, issue.4, 1993.
DOI : 10.1115/1.2929299

T. Meinhard and . Schobeiri, Turbomachinery Flow Physics and Dynamic Performance, 2012.

S. Rama and . Gorla, Turbomachinery design and theory, 2003.

E. P. Lesley, Experiments with a counter-propeller. Rapport technique, National advisory committee for aeronautics, 1933.

E. P. Lesley, Tandem air propellers. Rapport technique, National advisory committee for aeronautics, 1939.

E. P. Lesley, Tandem air propellers-ii. Rapport technique, National advisory committee for aeronautics, 1941.

P. Schimming, Counter rotating fans ??? An aircraft propulsion for the future?, Journal of Thermal Science, vol.12, issue.2, 2003.
DOI : 10.1007/s11630-003-0049-1

S. Dron, Toward acare 2020: Innovative engine architectures to achieve the environmantal goals?, 26th International Congress of The Aeronautical Sciences, pp.2008-2012, 2008.

T. Shigemitsu, T. Takano, A. Furukawa, K. Okuma, and S. Watanabe, Pressure measurement on casing wall and blade rows interaction of contra-rotating axial flow pump, Journal of Thermal Science, vol.124, issue.2, pp.142-149, 2005.
DOI : 10.1007/s11630-005-0025-z

T. Shigemitsu, A. Furukawa, S. Watanabe, K. Okuma, and J. Fukutomi, Experimental analysis of internal flow of contra-rotating axial flow pump, Proceedings of the 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows Lyon, 2007.

T. Shigemitsu, J. Fukutomi, and Y. , Performance and flow condition of small-sized axial fan and adoption of contra-rotating rotors, Journal of Thermal Science, vol.72, issue.715, pp.1-6, 2010.
DOI : 10.1007/s11630-010-0001-0

J. Fukutomi, T. Shigemitsu, and T. Yasunobu, Performance and internal flow of sirocco fan using contra-rotating rotors, Journal of Thermal Science, vol.65, issue.634, pp.35-41, 2008.
DOI : 10.1007/s11630-008-0035-8

L. Moroz, P. Pagur, Y. Govorushchenko, and K. Grebennik, Comparison of counter-rotating and traditional axial aircraft low-pressure turbines integral and detailed performances, Int. Symp. on Heat Transfer in Gas Turbine Systems, 2009.

L. Cho, H. Choi, S. Lee, and J. Cho, Numerical and Experimental Analyses for the Aerodynamic Design of High Performance Counter-Rotating Axial Flow Fans, Volume 2: Fora, pp.2009-78507, 2009.
DOI : 10.1115/FEDSM2009-78507

T. Shigemitsu, A. Furukawa, S. Watanabe, K. Okuma, and J. Fukutomi, Internal Flow Measurement with LDV at Design Point of Contra-Rotating Axial Flow Pump, Journal of Fluid Science and Technology, vol.4, issue.3, pp.723-734, 2009.
DOI : 10.1299/jfst.4.723

S. Momosaki, S. Usami, A. Watanabe, and . Furukawa, Numerical simulation of internal flow in a contra-rotating axial flow pump, 25th IAHR Symposium on Hydraulic Machinery and Systems IOP IOP Conf. Series, 2010.
DOI : 10.1088/1755-1315/12/1/012046

L. Cho, B. Cha, and J. Cho, Experimental Study on the Three-Dimensional Unsteady Flow Characteristics of the Counter-Rotating Axial Flow Fan, Journal of Fluid Science and Technology, vol.4, issue.1, pp.200-209, 2009.
DOI : 10.1299/jfst.4.200

T. Shigemitsu, J. Fukutomi, and H. Shimizu, Influence of Blade Row Distance on Performance and Flow Condition of Contra-Rotating Small-Sized Axial Fan, International Journal of Fluid Machinery and Systems, vol.5, issue.4, pp.161-167, 2012.
DOI : 10.5293/IJFMS.2012.5.4.161

L. Cao, . Watanabe, H. Imanishi, . Yoshimura, and . Furukawa, Blade rows interaction in contra-rotating axial flow pump designed with different rotational speed concept, 6th International Conference on Pumps and Fans with Compressors andWind Turbines IOP Conf. Series: Materials Science and Engineering, pp.10-1088, 2013.
DOI : 10.1088/1757-899X/52/2/022004

R. Noguera, R. Rey, F. Massouh, F. Bakir, and S. Kouidri, Design and analysis of axial pumps, Proc. ASME 1993 Fluids Engineering, Second Pumping Machinery Symposium, pp.95-111, 1993.

J. Vad, Forward Blade Sweep Applied to Low-Speed Axial Fan Rotors of Controlled Vortex Design: An Overview, Journal of Engineering for Gas Turbines and Power, vol.135, issue.1, p.12601, 2012.
DOI : 10.1115/1.4007428

C. Sarraf, H. Nouri, F. Ravelet, and F. Bakir, Experimental study of blade thickness effects on the overall and local performances of a Controlled Vortex Designed axial-flow fan, Experimental Thermal and Fluid Science, vol.35, issue.4, pp.684-693, 2011.
DOI : 10.1016/j.expthermflusci.2011.01.002

S. B. Reynolds, S. E. Gorrell, and J. Estevadeordal, Particle Image Velocimetry Analysis on the Effect of Stator Loading on Transonic Blade-Row Interactions, Journal of Turbomachinery, vol.134, issue.6, p.61012, 2012.
DOI : 10.1115/1.4006585

J. F. Oro, K. Argüelles-díaz, C. Santolaria-morros, and . Blanco-marigorta, Unsteady flow and wake transport in a low-speed axial fan with inlet guide vanes, Journal of Fluids Engineering, vol.129, pp.1015-1029, 2007.

K. Erik, M. William, and K. George, Note on experimental fluid dynamics ( efd ) for course 41822 : Design of experiments and signal analysis, 2007.

F. Bakir and S. Moreau, Efficient stator designed for automotive engine cooling fan systems, Proceedings of the ASME 2002 Fluids Engineering Division Summer Meeting, pp.2-31318, 2002.

S. C. Yen and F. T. Lin, Exit Flow Field and Performance of Axial Flow Fans, Journal of Fluids Engineering, vol.128, issue.2, pp.332-340, 2006.
DOI : 10.1115/1.2169809

M. Sturm and T. Carolus, Tonal fan noise of an isolated axial fan rotor due to inhomogeneous coherent structures at the intake, Noise Control Engineering Journal, vol.60, issue.6, 2012.
DOI : 10.3397/1.3701041

D. E. Van-zante, J. J. Adamczyk, A. J. Strazisar, and T. H. Okiishi, Wake Recovery Performance Benefit in a High-Speed Axial Compressor, Journal of Turbomachinery, vol.124, issue.2, pp.275-284, 2002.
DOI : 10.1115/1.1445793

V. References and . Blandeau, Aerodynamic Broadband Noise from Contra-Rotating Open Rotors, 2011.

L. Cho, B. Cha, and J. Cho, Experimental Study on the Three-Dimensional Unsteady Flow Characteristics of the Counter-Rotating Axial Flow Fan, Journal of Fluid Science and Technology, vol.4, issue.1, pp.200-209, 2009.
DOI : 10.1299/jfst.4.200

S. Dron, Toward acare 2020: Innovative engine architectures to achieve the environmantal goals?, 26th International Congress of The Aeronautical Sciences, pp.2008-2012, 2008.

K. Joongnyon and J. S. Hyung, Wall pressure fluctuations and flow-induced noise in a turbulent boundary layer over a bump, J. Fluid Mech, vol.558, pp.79-102, 2006.

S. Moreau and F. Bakir, Efficient stator designed for automotive engine cooling fan systems, ASME 2002 Fluids Engineering Division Summer Meeting, pp.2-31318, 2002.

H. Nouri, A. Danlos, F. Ravelet, F. Bakir, and C. Sarraf, Experimental Study of the Instationary Flow Between Two Ducted Counter-Rotating Rotors, Journal of Engineering for Gas Turbines and Power, vol.135, issue.2, p.22601, 2013.
DOI : 10.1115/1.4007756

URL : https://hal.archives-ouvertes.fr/hal-00713761

D. S. Pundhir and P. B. Sharma, A Study of Aerodynamic Performance of a Contra Rotating Axial Compressor Stage, Defence Science Journal, vol.42, issue.3, pp.191-199, 1992.
DOI : 10.14429/dsj.42.4381

T. Shigemitsu, A. Furukawa, S. Watanabe, K. Okuma, and J. Fukutomi, Internal Flow Measurement with LDV at Design Point of Contra-Rotating Axial Flow Pump, Journal of Fluid Science and Technology, vol.4, issue.3, pp.723-734, 2009.
DOI : 10.1299/jfst.4.723

T. Shigemitsu, J. Fukutomi, and Y. Okabe, Performance and flow condition of small-sized axial fan and adoption of contra-rotating rotors, Journal of Thermal Science, vol.72, issue.715, pp.1-6, 2010.
DOI : 10.1007/s11630-010-0001-0

H. Tennekes and J. L. Lumley, A First Course in Turbulence, 1972.

J. Xu, C. Tan, H. Chen, Y. Zhu, and D. Zhang, Influence of tip clearance on performance of a contra-rotating fan, Journal of Thermal Science, vol.115, issue.3, pp.207-214, 2009.
DOI : 10.1007/s11630-009-0207-1

A. Yoshihiko and S. Denki, Cooling system technology that changes the conventional trend, 2003.

D. E. Van-zante, J. J. Adamczyk, A. J. Strazisar, and T. H. Okiishi, Wake Recovery Performance Benefit in a High-Speed Axial Compressor, Journal of Turbomachinery, vol.124, issue.2, pp.275-284, 2002.
DOI : 10.1115/1.1445793