.. Equations-de-la-thermique, 78 3.2.2.1 Equation de la chaleur, 78 3.2.2.2 Conditions aux limites, p.79

M. Avrami, Kinetics of Phase Change. I General Theory, The Journal of Chemical Physics, vol.7, issue.12, pp.1103-1112, 1939.
DOI : 10.1063/1.1750380

M. Avrami, Kinetics of Phase Change. II Transformation???Time Relations for Random Distribution of Nuclei, The Journal of Chemical Physics, vol.8, issue.2, pp.212-224, 1940.
DOI : 10.1063/1.1750631

M. Avrami, Granulation, Phase Change, and Microstructure Kinetics of Phase Change. III, The Journal of Chemical Physics, vol.9, issue.2, pp.177-184, 1941.
DOI : 10.1063/1.1750872

C. Ageorges, L. Ye, Y. W. Mai, and M. Hou, Characteristics of resistance welding of lap-shear coupons. Part III. Crystallinity, Composites Part A: Applied Science and Manufacturing, vol.29, issue.8, pp.921-932, 1998.
DOI : 10.1016/S1359-835X(98)00024-4

C. Ageorges, L. Ye, and M. Hou, Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review, Composites Part A: Applied Science and Manufacturing, vol.32, issue.6, pp.839-857, 2001.
DOI : 10.1016/S1359-835X(00)00166-4

C. Ageorges and L. Ye, Fusion Bonding of Polymer Composites, 2002.
DOI : 10.1007/978-1-4471-0171-0

O. Altun, B. Y. Erhan, and A. Kalemtas, Problems for determining the thermal conductivity of TBCs by laser-flash method, Journal of Achievements in Materials and Manufacturing Engineering, vol.30, pp.115-120, 2008.

G. Antoniadis, K. M. Paraskevopoulos, A. A. Vassiliou, G. Z. Papageorgiou, and D. Bikiaris, Nonisothermal melt-crystallization kinetics for in situ prepared poly(ethylene terephthalate)/monmorilonite (PET/OMMT), Thermochimica Acta, vol.521, issue.1-2, pp.161-169, 2011.
DOI : 10.1016/j.tca.2011.04.019

W. P. Brennan, B. Miller, and J. C. Whitwell, Thermal conductivity measurements with the differential scanning calorimeter, Journal of Applied Polymer Science, vol.12, issue.7, pp.1800-1802, 1968.
DOI : 10.1002/app.1968.070120731

N. Billon, P. Barq, and J. Haudin, Modelling of the cooling of semicrystalline polymers during their processing, International Polymer Processing VI, vol.4, pp.348-355, 1991.

J. Bowman, T. Medhurst, and R. Portas, Procedures for Quantifying the Strength of Electrofusion Joints The Plastics and Rubber Institute, Proc. Plastics Pipes WZZ, 1992.

F. M. Brezzi, Mixed and hybrid finite element methods, 1991.
DOI : 10.1007/978-1-4612-3172-1

. J. Bowman, A review of the electrofusion joining process for polyethylene pipe systems, Polymer Engineering & Science, vol.8, issue.4, pp.674-691, 1997.
DOI : 10.1002/pen.11712

J. Chiu and P. G. Fair, Determination of thermal conductivity by differential scanning calorimetry, Thermochimica Acta, vol.34, issue.2, pp.267-273, 1979.
DOI : 10.1016/0040-6031(79)87116-6

J. Chevrand and J. J. Chéron, Knowledge of mechanisms taking place during electrofusion of polyethylene, Proceedings of the 1986 International Gas Research Conference, 1986.

T. Coupez, Stable Stabilized finite element for 3D forming calculation, 1995.

S. Cheng, Metastable States in Phase Transitions of Polymers, 2008.
DOI : 10.1016/B978-0-444-51911-5.00004-9

D. Gennes and P. G. , Reptation of a Polymer Chain in the Presence of Fixed Obstacles, The Journal of Chemical Physics, vol.55, issue.2, pp.572-579, 1971.
DOI : 10.1063/1.1675789

D. Gennes and P. G. , Comptes Rendus de l'Académie des Sciences, 1980.

D. Gennes and P. G. , Dynamics of Entangled Polymer Chains, Annual Review of Physical Chemistry, vol.33, issue.1, pp.49-61, 1982.
DOI : 10.1146/annurev.pc.33.100182.000405

D. Dufour and E. Meister, Polyethylene electrofusion technique : Prediction model of welding quality, International Gas Research Conference, pp.232-242, 1989.

R. Dewitt, High performance PE compounds for safer gas and water transportation, Proceedings of the Plastic Pipes VIII, C2/2-1, Köningshof?near, 1992.

D. Delaunay, L. Bot, P. Fulchiron, R. Luye, J. Regnier et al., Nature of contact between polymer and mold in injection molding. Part I: Influence of a non-perfect thermal contact, Polymer Engineering & Science, vol.23, issue.7, pp.1682-1691, 2000.
DOI : 10.1002/pen.11300

A. Dawson, M. Rides, and J. Nottay, The effect of pressure on the thermal conductivity of polymer melts, Polymer Testing, vol.25, issue.2, pp.268-275, 2006.
DOI : 10.1016/j.polymertesting.2005.10.001

A. Dawson, M. Rides, C. R. Allen, and J. M. Urquhart, Polymer???mould interface heat transfer coefficient measurements for polymer processing, Polymer Testing, vol.27, issue.5, pp.555-565, 2008.
DOI : 10.1016/j.polymertesting.2008.02.007

D. Sanos, W. N. , D. Sousa, J. A. , and G. R. Jr, Thermal conductivity behaviour of polymers around glass transition and crystalline melting temperatures, Polymer Testing, vol.32, pp.987-994, 2013.

S. F. Edwards and M. Et-doi, The Theory of Polymer Dynamics, p.9780198520337, 1986.

U. R. Evans, The laws of expanding circles and spheres in relation to the lateral growth of surface films and the grain-size of metals, Transactions of the Faraday Society, vol.41, pp.365-374, 1945.
DOI : 10.1039/tf9454100365

M. Eder and A. Wlochowicz, Kinetics of non-isothermal crystallization of polyethylene and polypropylene, Polymer, vol.24, issue.12, pp.1593-1595, 1983.
DOI : 10.1016/0032-3861(83)90177-5

F. Fernandes, Modélisation et calcul de l'évolution de la température et de la microstructure au cours du refroidissement des aciers, Thèse de doctorat, INPL Nancy. Références bibliographiques 201, 1985.

E. Federspiel, D. Gueugnaut, D. Saint-royre, and . Gdf-cersta, Comparaison d'essais de soudage sur éprouvettes Pied d'éléphant interprétés au moyen de la théorie de la diffusion des macromolécules, 1987.

M. Fujikake, M. Fukumura, and K. Kitao, Analysis of the electrofusion joining process in polyethylene gas piping systems, Computers and Structures, 1997.
DOI : 10.1016/S0045-7949(97)00008-4

J. Farjas and P. Roura, Modification of the Kolmogorov?Johnson, 2006.

A. N. Gent and J. Schultz, Effect of Wetting Liquids on the Strength of Adhesion of Viscoelastic Material, The Journal of Adhesion, vol.1, issue.4, pp.281-294, 1972.
DOI : 10.1080/00218467208072199

D. Gueugnaut and P. Wackernie, Infrared microspectrometric study of the thermal history of fusion welding of polyethylene, Journal of Applied Polymer Science, vol.35, issue.6, pp.1683-1694, 1988.
DOI : 10.1002/app.1988.070350623

D. Gueugnaut, D. Rousselot, and . Gdf-cersta, Etude Comparative du comportement au soudage de Micro-éprouvette en PE pour des cinétiques voisines de celles de l'électrosoudage, 1989.

D. Gueugnaut, G. Lappai, P. Vautherin, and D. Rousselot, Influence of the oxidation level on the fusion welding behavior of polyethylene pieces aced under accelerated conditions, 13th International Plastic Fuel Gas Pipe Symposium, p.252, 1993.

D. Gueugnaut, D. Rousselot, P. Schaaff, J. M. Quillevéré, and D. Dufour, Influence du degre d'oxydation sur le comportement au soudage par fusion du polyéthylène, critère de soudabilite, Colloque Annuel du Groupe Français d'applications des Polymères (GFP), P-42, 1996.

D. Garcia, Mesure de formes et de champs de déplacements tridimensionnels par stéréo-corrélation d'images, Thèse de doctorat, 2001.

D. Gueugnaut, D. Rousselot, and A. Darut, Using high load melt flow rate measurements and their relationship with molecular weights to better understand the behavior of the PE resins, Proceedings of the Plastics Pipes XII, 2004.

D. Gueugnaut, M. Piovano, G. Garneret, B. Sèvre, M. Vacchina et al., International Gas Union Research Conference, Distribution Session N°196, S2, Cité des Sciences et de l'Industrie, 2008.

V. V. Galera, A. L. Marinelli, and B. M. Carvalho, Determination of non-isothermal crystallization rate constant for pseudo-experimental calorimetric data, Materials Research, vol.12, issue.2, pp.151-157, 2009.
DOI : 10.1590/S1516-14392009000200007

J. N. Hay, Application of the modified avrami equations to polymer crystallisation kinetics, British Polymer Journal, vol.10, issue.2, pp.74-82, 1971.
DOI : 10.1002/pi.4980030205

J. D. Hoffman, G. T. Davis, and J. L. Lauritzen, The rate of crystallization of linear polymers, Treatise on Solid State Chemistry' (ed.: Hannay N. B.), pp.497-614, 1976.

A. Hammami, J. E. Spruiell, and A. K. Mehrotra, Quiescent nonisothermal crystallization kinetics of isotactic polypropylenes, Polymer Engineering and Science, vol.259, issue.10, pp.797-804, 1995.
DOI : 10.1002/pen.760351002

C. A. Hieber, Correlations for the quiescent crystallization kinetics of isotactic polypropylene and poly(ethylene terephthalate), Polymer, vol.36, issue.7, pp.1544-1467, 1995.
DOI : 10.1016/0032-3861(95)95925-Q

J. D. Hoffman and R. L. Miller, Kinetic of crystallization from the melt and chain folding in polyethylene fractions revisited: theory and experiment, Polymer, vol.38, issue.13, pp.3151-3206, 1997.
DOI : 10.1016/S0032-3861(97)00071-2

O. Hehn, Analyse expérimentale et simulation thermo-mécanique du soudage bout à bout de tubes de polyéthylène, Thèse de doctorat, 2006.

M. Hu, D. Yu, and J. Wie, Thermal conductivity determination of small polymer samples by differential scanning calorimetry, Polymer Testing, vol.26, issue.3, pp.333-337, 2007.
DOI : 10.1016/j.polymertesting.2006.11.003

C. Hekun, C. Zheng, C. Hong, and F. Yang, Ultrasonic phased array inspection on PE pipe heat fusion joints and electr-fusion joints, 18 World Conference in Non-Destructive Testing, 2012.

K. Jud and H. H. Kausch, Load transfer through chain molecules after interpenetration at interfaces, Polymer Bulletin, vol.1, issue.10, pp.697-707, 1979.
DOI : 10.1007/BF00255445

C. Jiao, Z. Wang, X. Liang, and Y. Hu, Non-isothermal crystallization kinetics of silane crosslinked polyethylene, Polymer Testing, vol.24, issue.1, pp.71-80, 2005.
DOI : 10.1016/j.polymertesting.2004.07.007

W. Kozlowski, Kinetics of crystallization of polyamide 6 from the glassy state, Journal of Polymer Science Part C: Polymer Symposia, vol.10, issue.1, pp.47-59, 1972.
DOI : 10.1002/polc.5070380106

J. Klein and B. J. Briscoe, The diffusion of long-chain molecules through bulk polyethylene, Proceedings of the Royal Society, pp.53-73, 1979.

Y. H. Kim and R. P. Wool, A theory of healing at a polymer-polymer interface, Macromolecules, vol.16, issue.7, pp.1115-1120, 1983.
DOI : 10.1021/ma00241a013

Y. P. Khanna, T. J. Taylor, and G. Chomyn, A new differential scanning calorimetry based approach for the estimation of thermal conductivity of polymer solids and melts, Polymer Engineering and Science, vol.33, issue.16, pp.1034-1041, 1988.
DOI : 10.1002/pen.760281604

M. Y. Keating and C. S. Mclaren, Thermal conductivity of polymer melts, Thermochimica Acta, vol.166, 1990.
DOI : 10.1016/0040-6031(90)80170-4

M. F. Kanninen, G. S. Buczala, C. J. Kuhlman, S. T. Green, S. C. Grogory et al., A theoretical and experimental evaluation of the long term integrity of an electrofusion joint, Proceedings of Plastics Pipes VIII, pp.2-3, 1992.

J. B. Leblond and J. Devaux, A new kinetic model for anisothermal metallurgical transformations in steels including effect of austenite grain size, Acta Metallurgica, vol.32, issue.1, 1984.
DOI : 10.1016/0001-6160(84)90211-6

L. Lavielle and J. Schultz, L'adhésion polymère-métal, Matériaux et Techniques, vol.67, pp.215-222, 1984.

H. Lobo and C. Cohen, Measurement of thermal conductivity of polymer melts by the line-source method, Polymer Engineering and Science, vol.13, issue.2, pp.65-70, 1990.
DOI : 10.1002/pen.760300202

P. Meares, Polymers: Structure and Bulk Properties, 1965.

B. Monasse and J. M. Haudin, Caractérisation thermodynamique de polylefines par DSC, influence de la tempéature de cistallisation et de la vitesse de chauffage, AFCAT, 1987.

A. M. Maffezzoli, J. M. Kenny, and L. Nicolais, Welding of PEEK/carbon fiber composite laminates, SAMPE Journal, vol.25, pp.35-39, 1989.

G. P. Marshall and B. G. Cosgrove, The Use of a Fracture Mechanics Approach for Assessment of Electrofusion Welding of MDPE, Proc. Advances in Joining Plastics and Composites, 1991.

A. Masaki, H. Nishimura, and S. Akiyama, Verification of EF Joint Fusion Strength Evaluation Using Model Specimen, Proceedings of the 12th Plastic Fuel Gas Pipe Symposium, 1991.

R. Mendoza, Morphologies induites dans les pièces en polyoléfine moulées par injection, Thèse de doctorat, 2005.

K. Nakamura, K. Watanabe, K. Katayama, and T. Amano, Some aspects of nonisothermal crystallization of polymers. I. Relationship between crystallization temperature, crystallinity, and cooling conditions, Journal of Applied Polymer Science, vol.16, issue.5, pp.1077-1091, 1972.
DOI : 10.1002/app.1972.070160503

K. Nakamura, K. Katayama, and T. Amano, Some aspects of nonisothermal crystallization of polymers. II. Consideration of the isokinetic condition, Journal of Applied Polymer Science, vol.17, issue.4, pp.1031-1041, 1973.
DOI : 10.1002/app.1973.070170404

M. Nelkon, P. Parker, and . Heinman, Advanced Level Physics (3 rd Edition, pp.336-338, 1988.

H. Nishimura, M. Nakakura, S. Shishido, A. Masaki, H. Shibano et al., Effect of Design Factors of EF Joints on Fusion Strength, 20 th Proceeding Plasic Gas Pipe Symposium, American Gas Association, Arlingon. Références bibliographiques, p.204, 1989.

M. Nussbaum, D. Dufour, and D. Gueugnaut, Electrofusion of Polyethylene: how and why, Proceedings of the 12th Plastic Fuel Gas Pipe Symposium, 1991.

A. Nakashiba, H. Nishimura, F. Inoue, T. Nakagawa, K. Homma et al., Fusion simulation of electrofusion polyethylene joints for gas distribution, Polymer Engineering and Science, vol.36, issue.17, pp.1146-1151, 1993.
DOI : 10.1002/pen.760331708

H. Nishimura, F. Inoue, and A. Nakashiba, Design of electrofusion joints and evaluation of fusion strength using fusion simulation technology, Polymer Engineering and Science, vol.38, issue.20, pp.1529-1534, 1994.
DOI : 10.1002/pen.760342003

C. Nicodeau, Modélisation du soudage en continu de composites à matrice thermoplastique, Thèse de doctorat, 2005.

I. Norme, Plastics pipes and fittings --Decohesion test of polyethylene (PE) saddle fusion joints --Evaluation of ductility of fusion joint interface by tear test, 2010.

T. Ozawa, Kinetics of non-isothermal crystallization, Polymer, vol.12, issue.3, pp.150-158, 1971.
DOI : 10.1016/0032-3861(71)90041-3

O. 'donoghue, P. E. Kanninen, M. F. Green, S. T. Grigoty, and S. C. , Results of a thermomechanical analysys model for electrofusion joining of PE gas pipes, Proceedings of the 12th Plastic Fuel Gas Pipe Symposium, pp.341-342, 1991.

W. J. Parker, R. J. Jenkins, C. P. Butler, and G. L. Abbott, Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal Conductivity, Journal of Applied Physics, vol.32, issue.9, pp.1679-1685, 1961.
DOI : 10.1063/1.1728417

G. L. Pitman, Electrofusion welding prediction and computer-Aided design of fittings, Proceedings of the Plastics Pipes VI, 1985.

R. M. Patel, J. H. Bheda, and T. E. Spruiell, Dynamics and structure development during high-speed melt spinning of nylon 6. II. Mathematical modeling, Journal of Applied Polymer Science, vol.42, issue.6, pp.1671-1682, 1991.
DOI : 10.1002/app.1991.070420622

E. Perchat, Mini-Elément et factoristaions incomplètes pour la parallélisation d'un solveur de Stockes 2D, 2000.

O. Parant, Etude expérimentale et calcul des contraintes residuelles dans des tubes extrudés en polyéthylène, Thèse de doctorat, 2002.

D. M. Price and M. Jarratt, Thermal conductivity of PTFE and PTFE composites, Thermochimica Acta, vol.392, issue.393, pp.231-236, 2002.
DOI : 10.1016/S0040-6031(02)00105-3

L. Robert, &. Miller-taylor, and . Francis, Flow-induced Crystallization in Polymer Systems, Midland Macromolecular Monograph), vol.6, p.9780677125404, 1979.

G. F. Rosala, A. J. Day, and A. S. Wood, A finite element model of the electrofusion welding of thermoplastic pipes, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol.38, issue.2, 1996.
DOI : 10.1243/0954408971529629

M. Rides, J. Morikawa, L. Halldahl, B. Hay, H. Lobo et al., Intercomparison of thermal conductivity and thermal diffusivity methods for plastics, Polymer Testing, vol.28, issue.5, pp.480-489, 2009.
DOI : 10.1016/j.polymertesting.2009.03.002

H. Schonhorn and L. H. Sharpe, Surface tension of molten polypropylene, Journal of Polymer Science Part B: Polymer Letters, vol.3, issue.3, pp.235-237, 1965.
DOI : 10.1002/pol.1965.110030316

A. K. Sircar and J. L. Wells, Thermal Conductivity of Elastomer Vulcanizates by Differential Scanning Calorimetry, Rubber Chemistry and Technology, vol.55, issue.1, pp.191-207, 1982.
DOI : 10.5254/1.3535866

D. Saint-royre, D. Gueugnaut, and D. Reveret, Test methodology for the determination of optimum fusion welding conditions of polyethylene, Journal of Applied Polymer Science, vol.38, issue.1, pp.147-162, 1989.
DOI : 10.1002/app.1989.070380114

H. J. Shin, Y. H. Jang, J. R. Kwon, and E. J. Lee, Nondestructive Testing of Fusion Joints of Polyethylene Piping by Real Time Ultrasonic Imaging, Plastics Pipes XII Conference, 2004.

L. H. Sperling, Introduction to Physical Polymer Science, 2006.
DOI : 10.1002/0471757128

J. Shi, J. Zheng, W. Guo, and Y. Qin, Defects classification and failure modes of electrofusion joint for connecting polyethylene pipes, Journal of Applied Polymer Science, vol.29, issue.5, pp.4070-4080, 2012.
DOI : 10.1002/app.35013

. Solvay-polyolefins-europe, Eltex® high density polyethylene

T. A. Taylor and R. E. Taylor, Testing of stability and thermal properties of thermal barrier coatings, ASM Handbook, vol.5, pp.654-659, 1999.

W. M. Underwood and J. R. Taylor, The thermal conductivity of several plastics determined by an improved line-source apparatus, Polymer Engineering and Science, vol.18, issue.7, pp.556-563, 1978.
DOI : 10.1002/pen.760180703

D. Usclat, Producing a good joint with electrofusion fitting, Plastic Fuel Gas Pipe Sympposium, 1985.

E. Van-der-held and F. Van-drunen, A method of measuring the thermal conductivity of liquids, Physica, vol.15, issue.10, pp.865-881, 1949.
DOI : 10.1016/0031-8914(49)90129-9

A. Vermogen, Genèse des microstructures et conséquences sur les propriétés mécaniques dans les polymères semi-cristallins renforcés par des charges lamellaires, Thèse de doctorat, Institut National des Sciences Appliquées de Lyon. Références bibliographiques, p.206, 2006.

R. P. Wool, O. Connor, and K. M. , A theory crack healing in polymers, Journal of Applied Physics, vol.52, issue.10, pp.5953-5963, 1981.
DOI : 10.1063/1.328526

R. P. Wool, B. L. Yuan, and O. J. Mcgarel, Welding of polymer interfaces, Polymer Engineering and Science, vol.28, issue.19, pp.1340-1367, 1989.
DOI : 10.1002/pen.760291906

M. W. Woo, P. Wong, Y. Tang, V. Triacca, P. E. Gloor et al., Melting behavior and thermal properties of high density polythylene, Polymer Engineering and Science, vol.11, issue.2, pp.151-156, 1995.
DOI : 10.1002/pen.760350205

D. Y. Wu, S. Meure, and D. Solomon, Self-healing polymeric materials: A review of recent developments, Progress in Polymer Science, vol.33, issue.5, pp.479-522, 2008.
DOI : 10.1016/j.progpolymsci.2008.02.001

S. Wang and J. Zhang, Non-isothermal crystallization kinetics of high density polyethylene/titanium dioxide composites via melt blending, press DOI 10, pp.10973-10986, 1007.
DOI : 10.1007/s10973-013-3241-x

M. Z. Yue, A. K. Wood, and E. El-rafey, Thermophysical characterisation of polyethylene, Applied Polymer Symposium, vol.5, pp.105-116, 1994.

Z. Zhang, C. Xiao, and Z. Dong, Comparison of the Ozawa and modified Avrami models of polymer crystallization under nonisothermal conditions using a computer simulation method, Thermochimica Acta, vol.466, issue.1-2, pp.22-28, 2007.
DOI : 10.1016/j.tca.2007.10.004

J. Zheng, J. Shi, W. Guo, P. Xu, Y. Qin et al., A Model for Predicting Temperature of Electrofusion Joints for Polyethylene Pipes, Journal of Pressure Vessel Technology, vol.131, pp.61403-061411, 2009.