O. Diard, S. Leclercq, G. Rousselier, and G. Cailletaud, Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity, International Journal of Plasticity, vol.21, issue.4, pp.691-722, 2005.
DOI : 10.1016/j.ijplas.2004.05.017

URL : https://hal.archives-ouvertes.fr/hal-00165134

T. Nishihara and M. Kawamoto, The strength of metals under combined alternating bending and torsion with phase difference. Memoirs of the College of Engineering, pp.85-112, 1945.

W. Lempp, Festigkeitsverhalten von Stählen bei mehrachsiger Dauerschwingbeanspruchung durch Normalspannungen mit überlagerten phasengleichen und phasenverschobenen Schubspannungen, Thèse de doctorat, 1977.

S. Mielke, Festigkeitsverhalten metallischer Werkstoffe unter zweiachsiger schwingender Bean-spruchung mit verschiedenen Spannungszveitverlaufen, Thèse de doctorat , TH Aachen, 1980.

S. Lasserre and C. Froustey, Multiaxial fatigue of steel???testing out of phase and in blocks: validity and applicability of some criteria, International Journal of Fatigue, vol.14, issue.2, pp.113-120, 1992.
DOI : 10.1016/0142-1123(92)90087-S

I. Koutiri, Effet des fortes contraintes hydrostatiques sur la tenue en fatigue des matériaux métalliques, Thèse de doctorat, Arts et Métiers ParisTech, 2011.

P. Lukas, L. Kunz, B. Weiss, and R. , NOTCH SIZE EFFECT IN FATIGUE, Fatigue & Fracture of Engineering Materials and Structures, vol.10, issue.3, pp.175-186, 1989.
DOI : 10.1016/0020-7403(78)90082-6

P. Franciosi, Étude théorique et expérimentale du comportement élastoplastique des monocristaux métalliques se déformant par glissement : modélisation pour un chargement complexe quasi statique calculations of copper bicrystal specimens submitted to tension-compression tests, Thèse de doctorat, pp.42921-935, 1984.

C. Gérard, F. N-'guyen, N. Osipov, G. Cailletaud, and M. Bornert, Comparison of experimental results and finite element simulation of strain localization scheme under cyclic loading, Computational Materials Science, vol.46, issue.3, pp.755-760, 2009.
DOI : 10.1016/j.commatsci.2009.04.037

C. Gérard, Mesures de champs et identification de modèles de plasticité cristalline, Thèse de doctorat, 2008.

P. Cunat, Aciers inoxydables critères de choix et structure. Techniques de l'ingénieur Aciers inoxydables, aciers réfractaires et aciers résistant au fluage, base documentaire : TIB346DUO.(ref. article : m4540), 2000.

L. Pryce and K. W. , Andrews : Practical estimation of composition balance and ferrite content in stainless steels, J. Iron Steel Inst, vol.195, pp.415-417, 1960.

C. J. Long and W. T. Delong, The ferrite of austenitic stainless steel, Weld J, vol.52, pp.281-297, 1973.

Q. Auzoux, Fissuration en relaxation des aciers inoxydables austénitique -Influence de l'écrouissage sur l'endommagement intergranulaire, Thèse de doctorat, Mines ParisTech, 2004.

M. Mineur, Conditions locales d'amorçage des fissures de fatigue dans un acier inoxydable de type 316L : aspects cristallographiques (EBSD), Thèse de doctorat, 2000.

N. Malésys, Modélisation probabiliste de formation de réseaux de fissures de fatigue thermique, Thèse de doctorat, 2007.

L. Vincent, G. Perez, /. Srma-/-lc2m-/, and . Nt, Étude de la fatigue d'un acier inox aux faibles niveaux de chargement, 2004.

S. Forest and M. Fivel, Plasticité cristalline et transition d'échelle : cas du monocristal . Techniques de l'ingénieur Étude des métaux et des alliages : état métallique, base documentaire : TIB345DUO.(ref. article : m4016), 2004.

C. Teodosiu, A finite theory of the elastoviscoplasticity of single crystals, International Journal of Engineering Science, vol.14, issue.8, pp.713-723, 1976.
DOI : 10.1016/0020-7225(76)90027-6

L. Tabourot, M. Fivel, and E. Rauch, Generalised constitutive laws for f.c.c. single crystals, Materials Science and Engineering: A, vol.234, issue.236, pp.234-236639, 1997.
DOI : 10.1016/S0921-5093(97)00353-5

P. Evrard, V. Aubin, S. Degallaix, and D. Kondo, Formulation of a new single crystal law for modeling the cyclic softening, Mechanics Research Communications, vol.35, issue.8, pp.589-594, 2008.
DOI : 10.1016/j.mechrescom.2008.06.001

URL : https://hal.archives-ouvertes.fr/hal-00333429

S. B. Batdorf and B. Budiansky, A mathematical theory of plasticity based on the concepts of slips, 1949.

G. I. Taylor, Plastic strain in metals, Journal of the Institute of Metals, vol.61, pp.307-324, 1938.

T. H. Lin, Analysis of elastic and plastic strains of a face-centred cubic crystal, Journal of the Mechanics and Physics of Solids, vol.5, issue.2, pp.143-149, 1957.
DOI : 10.1016/0022-5096(57)90058-3

K. and D. Van, Macro-micro approach in high-cycle multiaxial fatigue, ASTM Special Technical Publication, pp.120-130, 1993.

V. Monchiet, E. Charkaluk, and D. Kondo, Plasticity-damage based micromechanical modelling in high cycle fatigue, Comptes Rendus M??canique, vol.334, issue.2, pp.129-136, 2006.
DOI : 10.1016/j.crme.2005.12.002

URL : https://hal.archives-ouvertes.fr/hal-00021651

F. Morel, Huyen : Plasticity and damage heterogeneity in fatigue, Theoretical and Applied Fracture Mechanics, pp.98-127, 2008.

E. Kröner, Zur plastischen verformung des vielkristalls, Acta Metallurgica, vol.9, issue.2, pp.155-161, 1961.
DOI : 10.1016/0001-6160(61)90060-8

R. Hill, Continuum micro-mechanics of elastoplastic polycrystals, Journal of the Mechanics and Physics of Solids, vol.13, issue.2, pp.89-101, 1965.
DOI : 10.1016/0022-5096(65)90023-2

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, pp.5-6325, 1978.
DOI : 10.1016/0022-5096(78)90003-0

P. Evrard, V. Aubin, . Ph, S. Pilvin, D. Degallaix et al., Implementation and validation of a polycrystalline model for a bi-phased steel under non-proportional loading paths, Mechanics Research Communications, vol.35, issue.5, pp.336-343, 2008.
DOI : 10.1016/j.mechrescom.2008.01.006

URL : https://hal.archives-ouvertes.fr/hal-00761469

Y. Guilhem, Étude numérique des champs mécaniques locaux dans les agrégats polycristallins d'acier 316L sous chargement de fatigue, Thèse de doctorat, Mines ParisTech, 2011.

P. Pilvin and G. Cailletaud, Intergranular and Transgranular Hardening in Viscoplasticity, M. ?yczkowski, éditeur : Creep in Structures, pp.171-178, 1990.
DOI : 10.1007/978-3-642-84455-3_21

G. Cailletaud and P. Pilvin, Utilisation de mod??les polycristallins pour le calcul par ??l??ments finis, éditeurs : Multiaxial Fatigue and Design (ESIS 21), pp.515-541, 1994.
DOI : 10.1080/12506559.1994.10511147

Y. Murakami, Effects of defects, inclusions and inhomogeneities on fatigue strength, International Journal of Fatigue, vol.16, issue.3, pp.163-182, 1994.
DOI : 10.1016/0142-1123(94)90001-9

D. Taylor, The theory of critical distances, Engineering Fracture Mechanics, vol.75, issue.7, pp.1696-1705, 2008.
DOI : 10.1016/j.engfracmech.2007.04.007

L. Susmel, The theory of critical distances: a review of its applications in fatigue, Engineering Fracture Mechanics, vol.75, issue.7, pp.1706-1724, 2008.
DOI : 10.1016/j.engfracmech.2006.12.004

H. Adib-ramezani and J. Jeong, Advanced volumetric method for fatigue life prediction using stress gradient effects at notch roots, Computational Materials Science, vol.39, issue.3, pp.649-663, 2007.
DOI : 10.1016/j.commatsci.2006.08.017

M. H. Haddad, K. N. Smith, and T. H. , Fatigue Crack Propagation of Short Cracks, Journal of Engineering Materials and Technology, vol.101, issue.1, pp.42-46, 1979.
DOI : 10.1115/1.3443647

E. Orowan, Theory of the Fatigue of Metals, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.171, issue.944, pp.79-106, 1939.
DOI : 10.1098/rspa.1939.0055

N. E. Frost and D. S. Dugdale, Fatigue tests on notched mild steel plates with measurements of fatigue cracks, Journal of the Mechanics and Physics of Solids, vol.5, issue.3, pp.182-192, 1957.
DOI : 10.1016/0022-5096(57)90004-2

K. J. Miller and E. R. De-los-rios, Short Fatigue Cracks. ESIS publication 13, 1992.

H. Thu, Effet des hétérogénéités microstructurales sur le comportement en fatigue multiaxiale à grand nombre cycles, Thèse de doctorat, Arts et Métiers ParisTech, 2008.

I. V. Papadopoulos and V. P. , Invariant formulation of a gradient dependent multiaxial high-cycle fatigue criterion, Engineering Fracture Mechanics, vol.55, issue.4, pp.513-528, 1996.
DOI : 10.1016/S0013-7944(96)00047-1

B. Crossland, Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel, Proc. International Conference on Fatigue of Metals, pp.138-149, 1956.

F. Morel, A. Morel, and Y. Nadot, Comparison between defects and micro-notches in multiaxial fatigue ??? The size effect and the gradient effect, International Journal of Fatigue, vol.31, issue.2, pp.263-275, 2009.
DOI : 10.1016/j.ijfatigue.2008.09.005

URL : https://hal.archives-ouvertes.fr/hal-00809338

H. Thu, Influence des défauts de fonderie sur la résistance à la fatigue d'une fonte GS, Thèse de doctorat, Arts et Métiers ParisTech, 2008.

E. Pessard, Comportement anisotrope en fatigue des composants mécaniques forgés, Thèse de doctorat, Arts et Métiers ParisTech, 2009.

G. Bertolino, A. Constantinescu, and M. Ferjani, Treiber : A multiscale approach of fatigue and shakedown for notched structures. Theoretical and Applied Fracture Mechanics, pp.140-151, 2007.

C. A. Sweeney, W. Vorster, S. B. Leen, E. Sakurada, P. E. Mchugh et al., The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation, Journal of the Mechanics and Physics of Solids, vol.61, issue.5, pp.611224-1240, 2013.
DOI : 10.1016/j.jmps.2013.01.001

V. P. Bennett and D. L. Mcdowell, Polycrystal orientation distribution effects on microslip in high cycle fatigue, International Journal of Fatigue, vol.25, issue.1, pp.27-39, 2003.
DOI : 10.1016/S0142-1123(02)00057-9

Y. Guilhem, S. Basseville, F. Curtit, J. Stéphan, and G. Cailletaud, Investigation of the effect of grain clusters on fatigue crack initiation in polycrystals, International Journal of Fatigue, vol.32, issue.11, pp.1748-1763, 2010.
DOI : 10.1016/j.ijfatigue.2010.04.003

URL : https://hal.archives-ouvertes.fr/hal-00509802

E. Thieulot-laure, Méthode probabiliste unifiée pour la prédiction du risque de rupture en fatigue, Thèse de doctorat, 2008.

I. Simonovski, K. Nilsson, and L. Cizelj, The influence of crystallographic orientation on crack tip displacements of microstructurally small, kinked crack crossing the grain boundary, Computational Materials Science, vol.39, issue.4, pp.817-828, 2007.
DOI : 10.1016/j.commatsci.2006.10.005

C. Robert, N. Saintier, T. Palin-luc, and F. , Micro-mechanical modelling of high cycle fatigue behaviour of metals under multiaxial loads, Mechanics of Materials, vol.55, pp.112-129, 2012.
DOI : 10.1016/j.mechmat.2012.08.006

F. P. Dunne, R. Kiwanuka, and A. Wilkinson, Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: Application to cold-dwell fatigue in Ti alloys, International Journal of Plasticity, vol.23, issue.6, pp.1061-1083, 2007.
DOI : 10.1016/j.ijplas.2006.10.013

A. King, M. Herbig, W. Ludwig, P. Reischig, E. M. Lauridsen et al., Buffière : Non-destructive analysis of micro texture and grain boundary character from x-ray diffraction contrast tomography. Nuclear Instruments and Methods in Physics Research Section B : Beam Interactions with, Materials and Atoms, vol.268, pp.3-4291, 2010.

A. Musienko, A. Tatschl, K. Schmidegg, O. Kolednik, and R. Pippan, Cailletaud : Three-dimensional finite element simulation of a polycrystalline copper specimen, Acta Materialia, issue.12, pp.554121-4136, 2007.

A. L. Pécheur, F. Curtit, M. Clavel, J. M. Stephan, C. Rey et al., Polycrystal modelling of fatigue: Pre-hardening and surface roughness effects on damage initiation for 304L stainless steel, International Journal of Fatigue, vol.45, pp.48-60, 2012.
DOI : 10.1016/j.ijfatigue.2012.06.014

Y. Li, V. Aubin, C. Rey, and P. Bompard, Polycrystalline numerical simulation of variable amplitude loading effects on cyclic plasticity and microcrack initiation in austenitic steel 304L, International Journal of Fatigue, vol.42, pp.71-81, 2012.
DOI : 10.1016/j.ijfatigue.2011.07.003

URL : https://hal.archives-ouvertes.fr/hal-00756036

J. Schwartz, O. Fandeur, C. Rey, S. Ghosh, Y. Bhandari et al., Numerical approach of cyclic behaviour of 316LN stainless steel based on a polycrystal modelling including strain gradients CAD-based reconstruction of 3D polycrystalline alloy microstructures from FIB generated serial sections, International Journal of Fatigue Computer- Aided Design, vol.55, issue.3, pp.202-212, 2008.

M. Herbig, A. King, P. Reischig, H. Proudhon, E. M. Lauridsen et al., 3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography, Acta Materialia, vol.59, issue.2, pp.590-601, 2011.
DOI : 10.1016/j.actamat.2010.09.063

URL : https://hal.archives-ouvertes.fr/hal-00527628

M. Sauzay, Effet de l'anisotropie ??lastique cristalline sur la distribution des facteurs de Schmid ?? la surface des polycristaux, Comptes Rendus M??canique, vol.334, issue.6, pp.353-361, 2006.
DOI : 10.1016/j.crme.2006.03.004

C. Chauvot, Fatigue crack initiation and crystallographic crack growth in an austenitic stainless steel, Computational Materials Science, vol.19, issue.1-4, pp.87-96, 2000.
DOI : 10.1016/S0927-0256(00)00143-9

M. Groeber, S. Ghosh, M. D. Uchic, and D. M. , A framework for automated analysis and simulation of 3D polycrystalline microstructures. Part 2: Synthetic structure generation???, Acta Materialia, vol.56, issue.6, pp.1274-1287, 2008.
DOI : 10.1016/j.actamat.2007.11.040

M. Groeber, S. Ghosh, M. D. Uchic, and D. M. , A framework for automated analysis and simulation of 3D polycrystalline microstructures.Part 1: Statistical characterization, Acta Materialia, vol.56, issue.6, pp.1257-1273, 2008.
DOI : 10.1016/j.actamat.2007.11.041

P. Erieau and C. Rey, Modeling of deformation and rotation bands and of deformation induced grain boundaries in IF steel aggregate during large plane strain compression, International Journal of Plasticity, vol.20, issue.10, pp.1763-1788, 2004.
DOI : 10.1016/j.ijplas.2003.11.014

URL : https://hal.archives-ouvertes.fr/hal-00019025

E. Héripré, M. Dexet, J. Crépin, L. Gélébart, A. Roos et al., Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials, International Journal of Plasticity, vol.23, issue.9, pp.1512-1539, 2007.
DOI : 10.1016/j.ijplas.2007.01.009

L. St-pierre, E. Héripré, M. Dexet, J. Crépin, and G. Bertolino, 3D simulations of microstructure and comparison with experimental microstructure coming from O.I.M analysis, International Journal of Plasticity, vol.24, issue.9, pp.1516-1532, 2008.
DOI : 10.1016/j.ijplas.2007.10.004

URL : https://hal.archives-ouvertes.fr/hal-00645051

M. Bornert, T. Bretheau, and P. Gilormini, Homogénéisaion en mécanique des matériaux 1 -Matériaux aléatoires élastique et milieux périodiques, 2001.

G. M. Owolabi, R. Prasannavenkatesan, and D. L. Mcdowell, Probabilistic framework for a microstructure-sensitive fatigue notch factor, International Journal of Fatigue, vol.32, issue.8, pp.1378-1388, 2010.
DOI : 10.1016/j.ijfatigue.2010.02.003

C. P. Przybyla and D. L. Mcdowell, Microstructure-sensitive extreme-value probabilities of high-cycle fatigue for surface vs. subsurface crack formation in duplex Ti???6Al???4V, Acta Materialia, vol.60, issue.1, pp.293-305, 2012.
DOI : 10.1016/j.actamat.2011.09.031

J. Réthoré, J. Ph, S. Tinnes, J. Roux, F. Buffière et al., Extended three-dimensional digital image correlation (X3D-DIC), Comptes Rendus M??canique, vol.336, issue.8, pp.643-649, 2008.
DOI : 10.1016/j.crme.2008.06.006

J. Schwartz, Approche non locale en plasticité cristalline : application à l'étude du comportement mécanique de l'acier AISI 316LN en fatigue oligocyclique, Thèse de doctorat, 2011.

C. P. Przybyla and D. L. Mcdowell, Simulated microstructure-sensitive extreme value probabilities for high cycle fatigue of duplex Ti???6Al???4V, International Journal of Plasticity, vol.27, issue.12, pp.1871-1895, 2011.
DOI : 10.1016/j.ijplas.2011.01.006

X. Fang, W. Yan, H. Gao, Z. Yue, J. Liu et al., Finite element simulation of surface deformation of polycrystal with a rough surface under repeated load, Finite Elements in Analysis and Design, vol.60, pp.64-71, 2012.
DOI : 10.1016/j.finel.2012.05.007

Y. Li, V. Aubin, C. Rey, and P. Bompard, Polycrystalline numerical simulation of variable amplitude loading effects on cyclic plasticity and microcrack initiation in austenitic steel 304L, International Journal of Fatigue, vol.42, issue.0, pp.71-81, 2012.
DOI : 10.1016/j.ijfatigue.2011.07.003

URL : https://hal.archives-ouvertes.fr/hal-00756036

P. Van-'t-klooster, N. J. Trappeniers, and S. N. , Effect of pressure on the elastic constants of noble metals from -196 to +25??C and up to 2500 bar, Physica B+C, vol.97, issue.1, pp.65-75, 1979.
DOI : 10.1016/0378-4363(79)90008-1

C. Geuzaine and J. F. , Remacle : Gmsh : A 3-d finite element mesh generator with built-in pre-and post-processing facilities, International Journal for Numerical Methods in Engineering, issue.11, pp.791309-1331, 2009.

J. Besson, R. Leriche, and R. Foerch, Object-Oriented Programming Applied to the Finite Element Method Part II. Application to Material Behaviors, Revue Europ??enne des ??l??ments Finis, vol.62, issue.1, pp.567-588, 1998.
DOI : 10.1093/comjnl/7.4.308

A. Bernasconi and I. V. Papadopoulos, Efficiency of algorithms for shear stress amplitude calculation in critical plane class fatigue criteria, Computational Materials Science, vol.34, issue.4, pp.355-368, 2005.
DOI : 10.1016/j.commatsci.2005.01.005

P. Lukà? and L. Kunz, Effect of mean stress on cyclic stress-strain response and high cycle fatigue life, International Journal of Fatigue, vol.11, issue.1, pp.55-58, 1989.
DOI : 10.1016/0142-1123(89)90048-0

A. M. Freudenthal and E. J. , On the Statistical Interpretation of Fatigue Tests, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.216, issue.1126, pp.309-332, 1126.
DOI : 10.1098/rspa.1953.0024

S. Balasubramanian and L. , Elasto-viscoplastic constitutive equations for polycrystalline fcc materials at low homologous temperatures, Journal of the Mechanics and Physics of Solids, vol.50, issue.1, pp.101-126, 2002.
DOI : 10.1016/S0022-5096(01)00022-9

G. A. Alers, J. R. Neighbours, and H. Sato, Temperature dependent magnetic contributions to the high field elastic constants of nickel and an Fe-Ni alloy, Journal of Physics and Chemistry of Solids, vol.13, issue.1-2, pp.40-55, 1960.
DOI : 10.1016/0022-3697(60)90125-6

A. Teklu, H. Ledbetter, S. Kim, L. A. Boatner, M. Mcguire et al., Single-crystal elastic constants of Fe-15Ni-15Cr alloy, [105] P. Mu, V. Aubin, I. Alvarez-Armas et A. Armas : Influence of the crystalline orientations on microcrack initiation in low-cycle fatigue. Materials Science and Engineering : A, pp.3149-315445, 2004.
DOI : 10.1007/s11661-004-0059-y

A. Wormsen, Härkegård : A statistical investigation of fatigue behaviour according to weibull's weakest link theory, ECF15, 2004.

H. Lieurade, P. Rabbe, and A. Galtier, Essais de fatigue ? partie I. Techniques de l'ingénieur ? Essais mécaniques sur les métaux et alliages, base documentaire : TIB531DUO.(ref. article : m4170), 2013.

X. Zheng and B. Lü, Determination of probability distribution of fatigue strength and expressions of P-S-N curves, Engineering Fracture Mechanics, vol.50, issue.4, pp.483-491, 1995.
DOI : 10.1016/0013-7944(94)00218-7

S. Hanaki, M. Yamashita, H. Uchida, and M. Zako, On stochastic evaluation of S???N data based on fatigue strength distribution, International Journal of Fatigue, vol.32, issue.3, pp.605-609, 2010.
DOI : 10.1016/j.ijfatigue.2009.06.001

L. Susmel and D. Taylor, A simplified approach to apply the theory of critical distances to notched components under torsional fatigue loading, International Journal of Fatigue, vol.28, issue.4, pp.417-430, 2006.
DOI : 10.1016/j.ijfatigue.2005.07.035

M. Endo and Y. Murakami, Effects of an Artificial Small Defect on Torsional Fatigue Strength of Steels, Journal of Engineering Materials and Technology, vol.109, issue.2, pp.124-129, 1987.
DOI : 10.1115/1.3225951

T. Billaudeau, Y. Nadot, and G. Bezine, Multiaxial fatigue limit for defective materials: mechanisms and experiments, Acta Materialia, vol.52, issue.13, pp.3911-3920, 2004.
DOI : 10.1016/j.actamat.2004.05.006

M. Endo, The multiaxial fatigue strength of specimens containing small defects, de Biaxial/Multiaxial Fatigue and Fracture 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture, pp.243-264, 2003.
DOI : 10.1016/S1566-1369(03)80014-6

V. Aubin, Dialogue modèle-expériece en fatigue oligocyclique des aciers inoxydables . Mémoire d'habilitation à diriger des recherches, 2008.

I. Alvarez-armas and S. , Degallaix-Moreuil : Les aciers inoxydables duplex (Traité MIM, série matériaux et métallurgie), 2012.

J. Polák, K. Obrtlík, and M. Hájek, Cyclic plasticity in type 316L austenitic stainless steel. Fatigue and Fracture of Engineering Materials and Structures, pp.773-782, 1994.

L. Sang and J. D. Bass, Single-crystal elasticity of diopside to 14 GPa by brillouin scattering, Physics of the Earth and Planetary Interiors, 2014.

D. T. Pierce, K. Nowag, A. Montagne, J. A. Jiménez, J. E. Wittig et al., Single crystal elastic constants of high-manganese transformation- and twinning-induced plasticity steels determined by a new method utilizing nanoindentation, Materials Science and Engineering: A, vol.578, pp.134-139, 2013.
DOI : 10.1016/j.msea.2013.04.049

Z. F. Hou, Ab initio calculations of elastic modulus and electronic structures of cubic, Physica B: Condensed Matter, vol.403, issue.17, pp.2624-2628, 2008.
DOI : 10.1016/j.physb.2008.01.025

S. Forest and M. Fivel, Plasticité cristalline et transition d'échelle : cas du polycristal . Techniques de l'ingénieur Étude des métaux et des alliages : état métallique, base documentaire : TIB345DUO.(ref. article : m4017), 2004.

B. Devincre and L. Kubin, Scale transitions in crystal plasticity by dislocation dynamics simulations, Comptes Rendus Physique, vol.11, issue.3-4, pp.274-284, 2010.
DOI : 10.1016/j.crhy.2010.07.008

B. Devincre and L. Kubin, Physical analyses of crystal plasticity by DD simulations, Scripta Materialia, vol.54, issue.5, pp.741-746, 2006.
DOI : 10.1016/j.scriptamat.2005.10.066

URL : https://hal.archives-ouvertes.fr/hal-00019068

L. Dupuy and M. C. , A study of dislocation junctions in FCC metals by an orientation dependent line tension model, Acta Materialia, vol.50, issue.19, pp.4873-4885, 2002.
DOI : 10.1016/S1359-6454(02)00356-7

S. J. Basinski and Z. S. Basinski, Plastic deformation and work hardening, 1979.

P. Franciosi, M. Berveiller, and A. Zaoui, Latent hardening in copper and aluminium single crystals, Acta Metallurgica, vol.28, issue.3, pp.273-283, 1980.
DOI : 10.1016/0001-6160(80)90162-5

R. Quey, P. R. Dawson, and F. Barbe, Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing, Computer Methods in Applied Mechanics and Engineering, vol.200, issue.17-20, pp.17-201729, 2011.
DOI : 10.1016/j.cma.2011.01.002

URL : https://hal.archives-ouvertes.fr/hal-00858028

F. Ghanem, C. Braham, and H. Sidhom, Influence of steel type on electrical discharge machined surface integrity, Journal of Materials Processing Technology, vol.142, issue.1, pp.163-173, 2003.
DOI : 10.1016/S0924-0136(03)00572-7

URL : https://hal.archives-ouvertes.fr/hal-00114013

B. Hosari, Étude de l'enlèvement de matière par électro-érosion assistée par ultrason, Thèse de doctorat, 1988.

M. Dexet, Méthode de couplage entre expérimentations et simulations numériques en vue de l'identification de lois de comportement intracristallin. Application aux alliages de zirconium, Thèse de doctorat, École Polytechnique, 2006.

F. P. Dunne, A. J. Wilkinson, and R. Allen, Experimental and computational studies of low cycle fatigue crack nucleation in a polycrystal, International Journal of Plasticity, vol.23, issue.2, pp.273-295, 2007.
DOI : 10.1016/j.ijplas.2006.07.001

F. Bachmann, R. Hielscher, and H. Schaeben, Texture analysis with mtex?free and open source software toolbox. Solid State Phenomena, pp.63-68, 2010.

J. Barralis and G. Maeder, Précis de métallurgie : Élaboration, structurespropriétés , normalisation, 2005.

F. N. Rhines and B. R. Patterson, Effect of the Degree of Prior Cold Work on the Grain Volume Distribution and the Rate of Grain Growth of Recrystallized Aluminum, Metallurgical Transactions A, vol.26, issue.6, pp.985-993, 1982.
DOI : 10.1007/BF02643395

H. Azizi-alizamini, M. Militzer, and W. J. Poole, A novel technique for developing bimodal grain size distributions in low carbon steels, Scripta Materialia, vol.57, issue.12, pp.1065-1068, 2007.
DOI : 10.1016/j.scriptamat.2007.08.035

L. S. Toth, S. Biswas, and C. Gu, Notes on representing grain size distributions obtained by electron backscatter diffraction, Materials Characterization, vol.84, pp.67-71, 2013.
DOI : 10.1016/j.matchar.2013.07.013

K. Agbessi, Approches expérimentales et multi-échelles des processus d'amorçage des fissures de fatigue sous chargements complexes, Thèse de doctorat, École Nationale Supérieure d'Arts et Métiers, 2013.

J. Man, K. Obrtl?ík, and J. Polák, Study of surface relief evolution in fatigued 316L austenitic stainless steel by AFM, Materials Science and Engineering: A, vol.351, issue.1-2, pp.123-132, 2003.
DOI : 10.1016/S0921-5093(02)00846-8

L. Cretegny and A. Saxena, AFM characterization of the evolution of surface deformation during fatigue in polycrystalline copper, Acta Materialia, vol.49, issue.18, pp.3755-3765, 2001.
DOI : 10.1016/S1359-6454(01)00271-3

M. Risbet, X. Feaugas, C. Guillemer-neel, and M. Clavel, Use of atomic force microscopy to quantify slip irreversibility in a nickel-base superalloy, Scripta Materialia, vol.49, issue.6, pp.533-538, 2003.
DOI : 10.1016/S1359-6462(03)00357-9

P. Doumalin, M. Bornert, and J. Crépin, Caract??risation de la r??partition de la d??formation dans les mat??riaux h??t??rog??nesCharacterisation of the strain distribution in heterogeneous materials, M??canique & Industries, vol.4, issue.6, pp.607-617, 2003.
DOI : 10.1016/j.mecind.2003.09.002

P. Evrard, A. Bartali, V. Aubin, C. Rey, S. Degallaix et al., Influence of boundary conditions on bi-phased polycrystal microstructure calculation, International Journal of Solids and Structures, vol.47, issue.16, pp.471979-1986, 2010.
DOI : 10.1016/j.ijsolstr.2010.03.016

URL : https://hal.archives-ouvertes.fr/hal-00488072

R. Quey, P. R. Dawson, and F. Barbe, Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing, Computer Methods in Applied Mechanics and Engineering, vol.200, issue.17-20, pp.17-201729, 2011.
DOI : 10.1016/j.cma.2011.01.002

URL : https://hal.archives-ouvertes.fr/hal-00858028

V. Yastrebov, G. Cailletaud, and F. Feyel, Couplage de codes éléments finis et dynamique discrète de dislocations, CSMA 2013 -11ème colloque national en calcul des structures, 2013.

A. Ma, F. Roters, and D. Raabe, On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling ??? Theory, experiments, and simulations, Acta Materialia, vol.54, issue.8, pp.2181-2194, 2006.
DOI : 10.1016/j.actamat.2006.01.004

C. Déprés, M. Fivel, and L. Tabourot, A dislocation-based model for low-amplitude fatigue behaviour of face-centred cubic single crystals, Scripta Materialia, vol.58, issue.12, pp.1086-1089, 2008.
DOI : 10.1016/j.scriptamat.2008.02.027

M. Endo and I. Ishimoto, The fatigue strength of steels containing small holes under out-of-phase combined loading, International Journal of Fatigue, vol.28, issue.5-6, pp.5-6, 2006.
DOI : 10.1016/j.ijfatigue.2005.05.013

M. F. Vaz and M. A. , Fortes : Grain size distribution : The lognormal and the gamma distribution functions, Scripta Metallurgica, vol.22, issue.1, pp.35-40, 1988.

R. Hielscher, algorithm, Journal of Applied Crystallography, vol.41, issue.6, pp.1024-1037, 2008.
DOI : 10.1107/S0021889808030112

P. Eisenlohr and F. Roters, Selecting a set of discrete orientations for accurate texture reconstruction, Computational Materials Science, vol.42, issue.4, pp.670-678, 2008.
DOI : 10.1016/j.commatsci.2007.09.015

J. Hansen, J. Pospiech, and K. Lucke, Tables of texture analysis of cubic crystals, 1978.
DOI : 10.1007/978-3-662-01630-5

P. Coulomb, Les textures dans les métaux de réseau cubique. Dunod, 1972.

M. A. Melchior, A texture discretization technique adapted to polycrystalline aggregates with non-uniform grain size, Computational Materials Science, vol.37, issue.4, pp.557-564, 2006.
DOI : 10.1016/j.commatsci.2005.12.002

L. S. Tóth and P. Van-houtte, Discretization Techniques for Orientation Distribution Functions, Textures and Microstructures, vol.19, issue.4, pp.229-244, 1992.
DOI : 10.1155/TSM.19.229

N. Broll, Caractérisation de solides cristallisés par diffraction x. Techniques de l'ingénieur ? Études de stucture et caractérisation, base documentaire : TIB386DUO.(ref. article : p1080), 2012.

C. Esling and H. J. Bunge, Texture et anisotropie des matériaux polycristallins définitions et techniques expérimentales Techniques de l'ingénieur ? Mise en forme des métaux : aspects rhéologiques et métallurgiques, base documentaire : TIB476DUO.(ref. article : m3040), 2012.

H. R. Wenk and U. F. Kocks, The representation of orientation distributions, Metallurgical and Materials Transactions A, vol.90, issue.6, pp.1083-1092, 1991.
DOI : 10.1002/pssa.2210900149