A. Gani, E. Kruth, J. P. Vanherck, P. Lauwers, and B. , A geometrical model of the cut in five-axis milling accounting for the influence of tool orientation, The International Journal of Advanced Manufacturing Technology, vol.17, issue.1, pp.677-684, 1997.
DOI : 10.1007/BF01179066

M. Al-ahmad, Industrialisation de procédé: contribution à la maîtrise de l'opération de tréflage ou fraisage vertical -approches analytique et expérimentale (Thèse) Arts et Métiers ParisTech, 2008.

Y. Altintas and E. Budak, Analytical Prediction of Stability Lobes in Milling, CIRP Annals - Manufacturing Technology, vol.44, issue.1, pp.357-362, 1995.
DOI : 10.1016/S0007-8506(07)62342-7

Y. Altintas and P. Lee, A General Mechanics and Dynamics Model for Helical End Mills, CIRP Annals - Manufacturing Technology, vol.45, issue.1, pp.59-64, 1996.
DOI : 10.1016/S0007-8506(07)63017-0

A. Azeem and H. Feng, Cutting force prediction for ball-end mills with non-horizontal and rotational cutting motions, The International Journal of Advanced Manufacturing Technology, vol.45, issue.021003, pp.1833-1845, 2013.
DOI : 10.1007/s00170-012-4612-3

A. Azeem, H. Feng, and L. Wang, Simplified and efficient calibration of a mechanistic cutting force model for ball-end milling, International Journal of Machine Tools and Manufacture, vol.44, issue.2-3, pp.291-298, 2004.
DOI : 10.1016/j.ijmachtools.2003.09.007

S. Bae, K. Ko, B. H. Kim, and B. K. Choi, Automatic feedrate adjustment for pocket machining, Computer-Aided Design, vol.35, issue.5, pp.495-500, 2003.
DOI : 10.1016/S0010-4485(01)00195-6

A. Banerjee, H. Feng, and E. V. Bordatchev, Geometry of chip formation in circular end milling, The International Journal of Advanced Manufacturing Technology, vol.34, issue.5, pp.21-35, 2012.
DOI : 10.1007/s00170-011-3478-0

X. Beudaert, Commande numérique ouverte: interpolation optimisée pour l'usinage 5 axes grande vitesse des surfaces complexes (Thèse), 2013.

E. L. Bohez, Five-axis milling machine tool kinematic chain design and analysis, International Journal of Machine Tools and Manufacture, vol.42, issue.4, pp.505-520, 2002.
DOI : 10.1016/S0890-6955(01)00134-1

E. L. Bohez, Compensating for systematic errors in 5-axis NC machining, Computer-Aided Design, vol.34, issue.5, pp.391-403, 2002.
DOI : 10.1016/S0010-4485(01)00111-7

E. L. Bohez, B. Ariyajunya, C. Sinlapeecheewa, T. M. Shein, D. T. Lap et al., Systematic geometric rigid body error identification of 5-axis milling machines, Computer-Aided Design, vol.39, issue.4, pp.229-244, 2007.
DOI : 10.1016/j.cad.2006.11.006

S. Bolsunovsky, V. Vermel, and G. Gubanov, Cutting Forces Calculation and Experimental Measurement for 5-axis Ball End Milling, Procedia CIRP, vol.8, 2013.
DOI : 10.1016/j.procir.2013.06.095

M. Boujelbene, A. Moisan, W. Bouzid, and S. Torbaty, Variation cutting speed on the five axis milling, J. Achiev. Mater. Manuf. Eng, vol.21, pp.7-14, 2007.

K. Bouzakis, P. Aichouh, and K. Efstathiou, Determination of the chip geometry, cutting force and roughness in free form surfaces finishing milling, with ball end tools, International Journal of Machine Tools and Manufacture, vol.43, issue.5, pp.499-514, 2003.
DOI : 10.1016/S0890-6955(02)00265-1

B. Bringmann and W. Knapp, Model-based ???Chase-the-Ball??? Calibration of a 5-Axes Machining Center, CIRP Annals - Manufacturing Technology, vol.55, issue.1, pp.531-534, 2006.
DOI : 10.1016/S0007-8506(07)60475-2

J. By-chen, Y. Huang, and M. Chen, Feedrate optimization and tool profile modification for the high-efficiency ball-end milling process, International Journal of Machine Tools and Manufacture, vol.45, issue.9, pp.1070-1076, 2005.
DOI : 10.1016/j.ijmachtools.2004.11.020

S. Campocasso, Développement d'un modèle d'efforts de coupe multi-opérations et multimatériaux Application au tournage du cuivre pur dans différents états métallurgiques, Thèse). Arts et Métiers ParisTech, 2013.

Q. Cao, D. Xue, J. Zhao, and Y. Li, A cutting force model considering influence of radius of curvature for sculptured surface machining, The International Journal of Advanced Manufacturing Technology, vol.34, issue.7, pp.821-835, 2011.
DOI : 10.1007/s00170-010-2980-0

Q. Cao, J. Zhao, S. Han, and X. Chen, Force coefficients identification considering inclination angle for ball-end finish milling, Precision Engineering, vol.36, issue.2, pp.252-260, 2012.
DOI : 10.1016/j.precisioneng.2011.10.007

Q. Cao, J. Zhao, Y. Li, and L. Zhu, The effects of cutter eccentricity on the cutting force in the ball-end finish milling, The International Journal of Advanced Manufacturing Technology, vol.44, issue.14, pp.2843-2849, 2013.
DOI : 10.1007/s00170-013-5205-5

J. Chaves-jacob, Développement d'une méthodologie de réduction des défauts géométriques: application à l'usinage 5-axes de composants de turbomachine (Thèse) Arts et Métiers ParisTech, 2009.

J. Chaves-jacob, G. Poulachon, and E. Duc, Optimal strategy for finishing impeller blades using 5-axis machining, The International Journal of Advanced Manufacturing Technology, vol.21, issue.6, pp.573-583, 2012.
DOI : 10.1007/s00170-011-3424-1

X. Chen, J. Zhao, Y. Dong, S. Han, A. Li et al., Effects of inclination angles on geometrical features of machined surface in five-axis milling, The International Journal of Advanced Manufacturing Technology, vol.195, issue.1???3, pp.1721-1733, 2013.
DOI : 10.1007/s00170-012-4293-y

N. Corduan, Etude des phénomènes vibratoires en fraisage de finition de plaques minces: application aux aubages de turbines aéronautiques (Thèse) Arts et Métiers ParisTech, 2006.

N. Corduan, J. Costes, F. Lapujoulade, and A. Larue, Experimental approach of milling stability of thin walled parts, comparison with time domain simulation, Presented at the CIRP International Workshop on Modeling of Machining Operations, pp.59-69, 2006.

B. Denkena, D. Boehnke, and J. H. Dege, Helical milling of CFRP-titanium layer compounds. High Perform, Cut, vol.1, pp.64-69, 2008.

V. Diciuc, M. Lobontiu, and M. Cosma, Optimization of cutting conditions when five axis milling using ball nose end mills. theoretical study, Proc. Manuf. Syst. 5, 2010.

G. Dongming, R. Fei, and S. Yuwen, An Approach to Modeling Cutting Forces in Five-Axis Ball-End Milling of Curved Geometries Based on Tool Motion Analysis, Journal of Manufacturing Science and Engineering, vol.132, issue.4, pp.41004-041004, 2010.
DOI : 10.1115/1.4001420

M. Dotcheva and H. Millward, The application of tolerance analysis to the theoretical and experimental evaluation of a CNC corner-milling operation, Journal of Materials Processing Technology, vol.170, issue.1-2, 2005.
DOI : 10.1016/j.jmatprotec.2005.05.016

J. Du, X. Yan, and X. Tian, The avoidance of cutter gouging in five-axis machining with a fillet-end milling cutter, The International Journal of Advanced Manufacturing Technology, vol.43, issue.8, pp.89-97, 2012.
DOI : 10.1007/s00170-011-3779-3

E. Duc, Usinage de formes gauches Contribution à l'amélioration de la qualité des trajectoires d'usinage (Thèse), 1998.

C. Eksioglu, Z. M. Kilic, and Y. Altintas, Discrete-Time Prediction of Chatter Stability, Cutting Forces, and Surface Location Errors in Flexible Milling Systems, Journal of Manufacturing Science and Engineering, vol.134, issue.6, 2012.
DOI : 10.1115/1.4007622

S. Engin and Y. Altintas, Mechanics and dynamics of general milling cutters., International Journal of Machine Tools and Manufacture, vol.41, issue.15, pp.2195-2212, 2001.
DOI : 10.1016/S0890-6955(01)00045-1

H. Erdim and A. Sullivan, Cutter Workpiece Engagement Calculations for Five-axis Milling Using Composite Adaptively Sampled Distance Fields, Procedia CIRP, vol.8, 2013.
DOI : 10.1016/j.procir.2013.06.130
URL : http://doi.org/10.1016/j.procir.2013.06.130

M. Fontaine, Modélisation thermomécanique du fraisage de forme et validation expérimentale, Thèse), 2004.

M. Fontaine, A. Devillez, A. Moufki, and D. Dudzinski, Predictive force model for ball-end milling and experimental validation with a wavelike form machining test, International Journal of Machine Tools and Manufacture, vol.46, issue.3-4, pp.367-380, 2006.
DOI : 10.1016/j.ijmachtools.2005.05.011
URL : https://hal.archives-ouvertes.fr/hal-00178459

M. Fontaine, A. Devillez, A. Moufki, and D. Dudzinski, Modelling of cutting forces in ball-end milling with tool???surface inclination, Journal of Materials Processing Technology, vol.189, issue.1-3, pp.85-96, 2007.
DOI : 10.1016/j.jmatprotec.2007.01.007
URL : https://hal.archives-ouvertes.fr/hal-00261032

M. Fontaine, A. Moufki, A. Devillez, and D. Dudzinski, Modelling of cutting forces in ball-end milling with tool???surface inclination, Journal of Materials Processing Technology, vol.189, issue.1-3, pp.73-84, 2007.
DOI : 10.1016/j.jmatprotec.2007.01.006
URL : https://hal.archives-ouvertes.fr/hal-00261032

G. Fromentin and G. Poulachon, Geometrical analysis of thread milling???part 1: evaluation of tool angles, The International Journal of Advanced Manufacturing Technology, vol.39, issue.1, pp.73-80, 2010.
DOI : 10.1007/s00170-009-2402-3

B. Gassara, M. Baili, G. Dessein, M. Hbaieb, and W. B. Saï, Feed rate modeling in circular???circular interpolation discontinuity for high-speed milling, The International Journal of Advanced Manufacturing Technology, vol.41, issue.193, pp.1619-1634, 2013.
DOI : 10.1007/s00170-012-4284-z
URL : https://hal.archives-ouvertes.fr/hal-00959278

P. Gilles, G. Cohen, F. Monies, and W. Rubio, Torus cutter positioning in five-axis milling using balance of the transversal cutting force, The International Journal of Advanced Manufacturing Technology, vol.42, issue.21, pp.965-973, 2013.
DOI : 10.1007/s00170-012-4381-z

J. Gradisek, M. Kalveram, T. Insperger, K. Weinert, G. Stépán et al., On stability prediction for milling, International Journal of Machine Tools and Manufacture, vol.45, issue.7-8, pp.769-781, 2005.
DOI : 10.1016/j.ijmachtools.2004.11.015

J. Gradisek, M. Kalveram, and K. Weinert, Mechanistic identification of specific force coefficients for a general end mill, International Journal of Machine Tools and Manufacture, vol.44, issue.4, 2004.
DOI : 10.1016/j.ijmachtools.2003.10.001

N. Guillemot, Prise en compte de l'intégrité de surface pour la prévision de la tenue en fatigue de pièces usinées en fraisage (Thèse), 2010.

R. F. Harik, H. Gong, and A. Bernard, 5-axis flank milling: A state-of-the-art review, Computer-Aided Design, vol.45, issue.3, 2006.
DOI : 10.1016/j.cad.2012.08.004

T. Huang, X. Zhang, and H. Ding, Decoupled chip thickness calculation model for cutting force prediction in five-axis ball-end milling, The International Journal of Advanced Manufacturing Technology, vol.26, issue.5???6, pp.1203-1217, 2013.
DOI : 10.1007/s00170-013-5099-2

R. Iyer, P. Koshy, and E. Ng, Helical milling: An enabling technology for hard machining precision holes in AISI D2 tool steel, International Journal of Machine Tools and Manufacture, vol.47, issue.2, pp.205-210, 2007.
DOI : 10.1016/j.ijmachtools.2006.04.006

C. Jun, K. Cha, and Y. Lee, Optimizing tool orientations for 5-axis machining by configuration-space search method, Computer-Aided Design, vol.35, issue.6, pp.549-566, 2003.
DOI : 10.1016/S0010-4485(02)00077-5

G. M. Kim, P. J. Cho, and C. N. Chu, Cutting force prediction of sculptured surface ball-end milling using Z-map, International Journal of Machine Tools and Manufacture, vol.40, issue.2, pp.277-291, 2000.
DOI : 10.1016/S0890-6955(99)00040-1

K. Kim, M. Kang, J. Kim, Y. Jung, and N. Kim, A study on the precision machinability of ball end milling by cutting speed optimization, Journal of Materials Processing Technology, vol.130, issue.131, pp.130-131, 2002.
DOI : 10.1016/S0924-0136(02)00824-5

F. Klocke, K. Arntz, G. F. Cabral, M. Stolorz, and M. Busch, Characterization of Tool Wear in High-Speed Milling of Hardened Powder Metallurgical Steels, Advances in Tribology, vol.123, issue.3, p.906481, 2011.
DOI : 10.1080/10910340701554808

J. H. Ko and Y. Altintas, Time domain model of plunge milling operation, International Journal of Machine Tools and Manufacture, vol.47, issue.9, 2007.
DOI : 10.1016/j.ijmachtools.2006.08.007

J. H. Ko and D. Cho, 3D ball-end milling force model using instantaneous cutting force coefficients, J. Manuf. Sci. Eng. Trans. ASME, vol.127, pp.1-12, 2005.

J. Kwong, D. A. Axinte, and P. J. Withers, The sensitivity of Ni-based superalloy to hole making operations: Influence of process parameters on subsurface damage and residual stress, Journal of Materials Processing Technology, vol.209, issue.8, pp.3968-3977, 2009.
DOI : 10.1016/j.jmatprotec.2008.09.014

A. Lamikiz, L. N. Lopez-de-lacalle, J. A. Sanchez, and M. A. Salgado, Cutting force estimation in sculptured surface milling, International Journal of Machine Tools and Manufacture, vol.44, issue.14, pp.1511-1526, 2004.
DOI : 10.1016/j.ijmachtools.2004.05.004

A. Lasemi, D. Xue, and P. Gu, Recent development in CNC machining of freeform surfaces: A state-of-the-art review, Computer-Aided Design, vol.42, issue.7, 2010.
DOI : 10.1016/j.cad.2010.04.002

S. Lavernhe, Prise en compte des contraintes associées au couple MO-CN en génération de trajectoires 5 axes UGV (Thèse), 2006.

S. Lavernhe, Y. Quinsat, and C. Lartigue, Model for the prediction of 3D surface topography in 5-axis milling, The International Journal of Advanced Manufacturing Technology, vol.37, issue.9-12, pp.915-924, 2010.
DOI : 10.1007/s00170-010-2686-3
URL : https://hal.archives-ouvertes.fr/hal-00538108

I. Lazoglu and S. Y. Liang, Modeling of Ball-End Milling Forces With Cutter Axis Inclination, Journal of Manufacturing Science and Engineering, vol.122, issue.1, pp.3-11, 2000.
DOI : 10.1115/1.538885

P. Lee and Y. Altintas, Prediction of ball-end milling forces from orthogonal cutting data, International Journal of Machine Tools and Manufacture, vol.36, issue.9, pp.1059-1072, 1996.
DOI : 10.1016/0890-6955(95)00081-X

H. Li, G. He, X. Qin, G. Wang, C. Lu et al., Tool wear and hole quality investigation in dry helical milling of Ti-6Al-4V alloy, The International Journal of Advanced Manufacturing Technology, vol.41, issue.15, pp.1511-1523, 2014.
DOI : 10.1007/s00170-013-5570-0

X. Liang and Z. Yao, An accuracy algorithm for chip thickness modeling in 5-axis ball-end finish milling, Computer-Aided Design, vol.43, issue.8, 2011.
DOI : 10.1016/j.cad.2011.04.012

Y. Liang, D. Zhang, Z. C. Chen, J. Ren, and X. Li, Tool orientation optimization and location determination for four-axis plunge milling of open blisks, The International Journal of Advanced Manufacturing Technology, vol.8, issue.3, pp.2249-2261, 2014.
DOI : 10.1007/s00170-013-5440-9

R. Lin and Y. Koren, Efficient Tool-Path Planning for Machining Free-Form Surfaces, Journal of Engineering for Industry, vol.118, issue.1, pp.20-27, 1996.
DOI : 10.1115/1.2803642

X. Liu, K. Cheng, A. P. Longstaff, M. H. Widiyarto, and D. Ford, Improved dynamic cutting force model in ball-end milling. Part I: theoretical modelling and experimental calibration, The International Journal of Advanced Manufacturing Technology, vol.34, issue.5-6, pp.457-465, 2005.
DOI : 10.1007/s00170-003-2014-2

L. N. Lopez-de-lacalle, A. Lamikiz, J. A. Sánchez, I. F. Bustos, and . De, Recording of real cutting forces along the milling of complex parts, Mechatronics, vol.16, 2006.

L. N. Lopez-de-lacalle, A. Lamikiz, J. A. Sanchez, and M. A. Salgado, Effects of tool deflection in the high-speed milling of inclined surfaces, The International Journal of Advanced Manufacturing Technology, vol.15, issue.9-10, pp.621-631, 2004.
DOI : 10.1007/s00170-003-1723-x

T. Matsumura, M. Shimada, K. Teramoto, and E. Usui, Predictive cutting force model and cutting force chart for milling with cutter axis inclination, Int. J. Autom. Technol, vol.7, pp.30-38, 2013.

A. Moufki, A. Devillez, D. Dudzinski, and A. Molinari, Thermomechanical modelling of oblique cutting and experimental validation, International Journal of Machine Tools and Manufacture, vol.44, issue.9, 2004.
DOI : 10.1016/j.ijmachtools.2004.01.018

E. B. Msaddek, Z. Bouaziz, M. Baili, and G. Dessein, Modeling and simulation of high-speed milling centers dynamics, The International Journal of Advanced Manufacturing Technology, vol.47, issue.3, pp.877-888, 2011.
DOI : 10.1007/s00170-010-2884-z
URL : https://hal.archives-ouvertes.fr/hal-00793153

E. B. Msaddek, Z. Bouaziz, G. Dessein, and M. Baili, Optimization of pocket machining strategy in HSM, The International Journal of Advanced Manufacturing Technology, vol.27, issue.9???12, pp.69-81, 2012.
DOI : 10.1007/s00170-011-3801-9
URL : https://hal.archives-ouvertes.fr/hal-00735765

D. Olvera, L. N. De-lacalle, G. Urbikain, A. Lamikiz, P. Rodal et al., HOLE MAKING USING BALL HELICAL MILLING ON TITANIUM ALLOYS, Machining Science and Technology, vol.34, issue.1, pp.173-188, 2012.
DOI : 10.1080/10910340802519379

B. Ozturk and I. Lazoglu, Machining of free-form surfaces. Part I: Analytical chip load, International Journal of Machine Tools and Manufacture, vol.46, issue.7-8, pp.728-735, 2006.
DOI : 10.1016/j.ijmachtools.2005.07.038

E. Ozturk and E. Budak, Modeling of 5-axis milling processes, Mach. Sci. Technol, vol.11, pp.287-31110, 1080.

E. Ozturk and E. Budak, Dynamics and Stability of Five-Axis Ball-End Milling, Journal of Manufacturing Science and Engineering, vol.132, issue.2, pp.210031-02100313, 2010.
DOI : 10.1115/1.4001038

E. Ozturk, L. T. Tunc, and E. Budak, Investigation of lead and tilt angle effects in 5-axis ball-end milling processes, International Journal of Machine Tools and Manufacture, vol.49, issue.14, pp.1053-1062, 2009.
DOI : 10.1016/j.ijmachtools.2009.07.013

V. Pateloup, Amélioration du comportement cinématique des machines outils UGV. Application au calcul des trajets d'évidement de poches (Thèse), 2005.

V. Pateloup, E. Duc, and P. Ray, Corner optimization for pocket machining, International Journal of Machine Tools and Manufacture, vol.44, issue.12-13, 2004.
DOI : 10.1016/j.ijmachtools.2004.04.011

X. Pessoles, Aide au choix du posage en usinage 5 axes continus par la modélisation du comportement cinématique des machines -outils (Thèse), 2010.

X. Pessoles, Y. Landon, S. Segonds, and W. Rubio, Optimisation of workpiece setup for continuous five-axis milling: application to a five-axis BC type machining centre, The International Journal of Advanced Manufacturing Technology, vol.2, issue.1-4, pp.67-79, 2013.
DOI : 10.1007/s00170-012-4151-y

D. Prat, G. Fromentin, G. Poulachon, and M. Dessoly, Usinage 5 axes a la fraise hémisphérique: analyse de l'épaisseur coupée et du mode d'usinage, 2008.

D. Prat, G. Fromentin, G. Poulachon, and E. Duc, Experimental Analysis and Geometrical Modeling of Cutting Conditions Effect in 5 Axis Milling with Ti6Al4 V Alloy, Procedia CIRP, vol.1, 2012.
DOI : 10.1016/j.procir.2012.04.013
URL : https://hal.archives-ouvertes.fr/hal-00905265

D. Prévost, Modélisation avancée du couple Machine Outil / Commande Numérique dans un contexte UGV pour l'optimisation du calcul de trajectoires multi axes (Thèse), 2011.

W. Qiong, Z. Yidu, and Z. Hongwei, Corner-milling of Thin Walled Cavities on Aeronautical Components, Chinese Journal of Aeronautics, vol.22, issue.6, pp.677-684, 2009.
DOI : 10.1016/S1000-9361(08)60158-2

Y. Quinsat, Contribution au choix de stratégies d'usinage: application à la finition des pièces de formes complexes (Thèse), 2004.

M. Rauch and J. Hascoet, Génération de trajectoires de tréflage et d'usinage trochoïdal pour le vidage de poche. Mécanique Ind, pp.445-453, 2007.

M. Rauch and J. Hascoet, Selecting a milling strategy with regard to the machine tool capabilities: application to plunge milling, The International Journal of Advanced Manufacturing Technology, vol.41, issue.9, pp.47-54, 2012.
DOI : 10.1007/s00170-011-3498-9

M. Rauch and X. Xu, Five-axis machining: technologies and challenges, International Journal of Manufacturing Research, vol.5, issue.3, pp.327-352, 2010.
DOI : 10.1504/IJMR.2010.033470
URL : https://hal.archives-ouvertes.fr/hal-00501494

J. X. Ren, C. F. Yao, D. H. Zhang, Y. L. Xue, and Y. S. Liang, Research on tool path planning method of four-axis high-efficiency slot plunge milling for open blisk, The International Journal of Advanced Manufacturing Technology, vol.532, issue.533, pp.101-109, 2009.
DOI : 10.1007/s00170-009-2153-1

O. Ryabov, K. Mori, and N. Kasashima, Laser displacement meter application for milling diagnostics, Optics and Lasers in Engineering, vol.30, issue.3-4, pp.251-263, 1998.
DOI : 10.1016/S0143-8166(98)00032-3

M. H. Sadeghi, H. Haghighat, and M. A. Elbestawi, A solid modeler based ball-end milling process simulation, The International Journal of Advanced Manufacturing Technology, vol.22, issue.11-12, pp.775-785, 2003.
DOI : 10.1007/s00170-002-1452-6

J. Senatore, K. Moussaoui, S. Segonds, F. Moniès, and W. Rubio, Analysis of drift in iso-scallop planning???machining by regions, The International Journal of Advanced Manufacturing Technology, vol.22, issue.1-4, pp.719-732, 2013.
DOI : 10.1007/s00170-012-4517-1

C. Sim and M. Yang, The prediction of the cutting force in ball-end milling with a flexible cutter, International Journal of Machine Tools and Manufacture, vol.33, issue.2, pp.267-284, 1993.
DOI : 10.1016/0890-6955(93)90079-A

M. Smaoui, Z. Bouaziz, A. Zghal, G. Dessein, and M. Baili, Simulation of the deflected cutting tool trajectory in complex surface milling, The International Journal of Advanced Manufacturing Technology, vol.19, issue.5-8, pp.463-474, 2011.
DOI : 10.1007/s00170-011-3213-x
URL : https://hal.archives-ouvertes.fr/hal-00793552

G. Song, J. Li, and J. Sun, Approach for modeling accurate undeformed chip thickness in milling operation, The International Journal of Advanced Manufacturing Technology, vol.31, issue.1, pp.1429-1439, 2013.
DOI : 10.1007/s00170-013-4932-y

S. L. Soo, R. C. Dewes, and D. K. Aspinwall, 3D FE modelling of high-speed ball nose end milling, The International Journal of Advanced Manufacturing Technology, vol.49, issue.1, pp.871-882, 2010.
DOI : 10.1007/s00170-010-2581-y

K. V. Subrahmanyam, W. Y. San, H. G. Soon, and H. Sheng, Cutting force prediction for ball nose milling of inclined surface, The International Journal of Advanced Manufacturing Technology, vol.34, issue.5, pp.23-32, 2010.
DOI : 10.1007/s00170-009-2275-5

C. Tai and K. Fuh, A predictive force model in ball-end milling including eccentricity effects, International Journal of Machine Tools and Manufacture, vol.34, issue.7, pp.959-979, 1994.
DOI : 10.1016/0890-6955(94)90028-0

M. Terrier, A. Dugas, and J. Hascoët, PKM machine and high speed machining, Mec. Ind, vol.6, pp.431-437, 2005.

J. Tlusty, S. Smith, and C. Zamudio, Evaluation of Cutting Performance of Machining Centers, CIRP Annals - Manufacturing Technology, vol.40, issue.1, pp.405-410, 1991.
DOI : 10.1016/S0007-8506(07)62017-4

C. Tournier, Contribution à la conception des formes complexes: la surface d'usinage en fraisage 5 axes isocrête (Thèse), 2001.

C. Tournier and C. Lartigue, 5-axis Iso-scallop Tool Paths along Parallel Planes, Computer-Aided Design and Applications, vol.25, issue.9, pp.278-286278, 2008.
DOI : 10.3722/cadaps.2008.278-286
URL : https://hal.archives-ouvertes.fr/hal-00577727

M. Tsutsumi, S. Tone, N. Kato, and R. Sato, Enhancement of geometric accuracy of five-axis machining centers based on identification and compensation of geometric deviations, International Journal of Machine Tools and Manufacture, vol.68, pp.11-20, 2013.
DOI : 10.1016/j.ijmachtools.2012.12.008

O. Tuysuz, Y. Altintas, and H. Feng, Prediction of cutting forces in three and five-axis ball-end milling with tool indentation effect, International Journal of Machine Tools and Manufacture, vol.66, pp.66-81, 2013.
DOI : 10.1016/j.ijmachtools.2012.12.002

G. Urbicain, D. Olvera, L. N. De-lacalle, I. Zamakona, P. Rodal et al., New Strategies For Hole Making In Ti-6Al-4V, pp.361-369, 2009.
DOI : 10.1063/1.3273651

F. Valiorgue, Simulation des processus de génération de contraintes résiduelles en tournage du 316L, 2008.

S. Wakaoka, Y. Yamane, K. Sekiya, and N. Narutaki, High-speed and high-accuracy plunge cutting for vertical walls, Journal of Materials Processing Technology, vol.127, issue.2, pp.246-250, 2002.
DOI : 10.1016/S0924-0136(02)00151-6

M. Wan, W. H. Zhang, G. H. Qin, and G. Tan, Efficient calibration of instantaneous cutting force coefficients and runout parameters for general end mills, International Journal of Machine Tools and Manufacture, vol.47, issue.11, pp.1767-1776, 2007.
DOI : 10.1016/j.ijmachtools.2006.06.012

M. Weck and D. Staimer, Parallel Kinematic Machine Tools ??? Current State and Future Potentials, CIRP Annals - Manufacturing Technology, vol.51, issue.2, pp.671-683, 2002.
DOI : 10.1016/S0007-8506(07)61706-5

Z. C. Wei, M. J. Wang, Y. J. Cai, and S. F. Wang, Prediction of cutting force in ball-end milling of sculptured surface using improved Z-map, The International Journal of Advanced Manufacturing Technology, vol.48, issue.10, pp.1167-1177, 2013.
DOI : 10.1007/s00170-013-4909-x

Z. C. Wei, M. J. Wang, J. N. Zhu, and L. Y. Gu, Cutting force prediction in ball end milling of sculptured surface with Z-level contouring tool path, International Journal of Machine Tools and Manufacture, vol.51, issue.5, pp.428-432, 2011.
DOI : 10.1016/j.ijmachtools.2011.01.011

C. Wyen and K. Wegener, Influence of cutting edge radius on cutting forces in machining titanium, CIRP Annals - Manufacturing Technology, vol.59, issue.1, pp.93-96, 2010.
DOI : 10.1016/j.cirp.2010.03.056

M. Yang and H. Park, The prediction of cutting force in ball-end milling, International Journal of Machine Tools and Manufacture, vol.31, issue.1, pp.45-54, 1991.
DOI : 10.1016/0890-6955(91)90050-D

G. Yucesan and Y. Altintas, Prediction of Ball End Milling Forces, Journal of Engineering for Industry, vol.118, issue.1, pp.95-103, 1996.
DOI : 10.1115/1.2803652

N. Zeroudi, M. Fontaine, and K. Necib, Prediction of cutting forces in 3-axes milling of sculptured surfaces directly from CAM tool path, Journal of Intelligent Manufacturing, vol.123, issue.3, pp.1573-1587, 2012.
DOI : 10.1007/s10845-010-0460-x

L. Zhang, Process modeling and toolpath optimization for five-axis ball-end milling based on tool motion analysis, The International Journal of Advanced Manufacturing Technology, vol.40, issue.11???12, pp.905-916, 2011.
DOI : 10.1007/s00170-011-3354-y

R. Zhu, S. G. Kapoor, and R. E. Devor, Mechanistic Modeling of the Ball End Milling Process for Multi-Axis Machining of Free-Form Surfaces, Journal of Manufacturing Science and Engineering, vol.123, issue.3, pp.369-379, 2001.
DOI : 10.1115/1.1369357

S. Zhu, G. Ding, S. Qin, J. Lei, L. Zhuang et al., Integrated geometric error modeling, identification and compensation of CNC machine tools, International Journal of Machine Tools and Manufacture, vol.52, issue.1, pp.24-29, 2012.
DOI : 10.1016/j.ijmachtools.2011.08.011