M. J. Aftosmis, Solution Adaptive Cartesian Grid Methods for Aerodynamic Flows with Complex Geometries. VKI LS, pp.1997-1999

J. T. Batina, Unsteady Euler algorithm with unstructured dynamic mesh for complex-aircraft aerodynamic analysis, AIAA Journal, vol.29, issue.3, pp.327-333, 1991.
DOI : 10.2514/3.10583

J. A. Benek, J. L. Steger, and F. C. Dougherty, A flexible grid embedding technique with application to the Euler equations, 6th Computational Fluid Dynamics Conference Danvers, 1983.
DOI : 10.2514/6.1983-1944

C. Benoit, Méthode d'adaptation de maillages au moyen d'algorithmes génétiques pour le calcul d'´ ecoulements compressibles, Ecole Nationale Supérieure d'Arts et Métiers, 1999.

C. Benoit and G. Jeanfaivre, Three-Dimensional Inviscid Isolated Rotor Calculations Using Chimera and Automatic Cartesian Partitioning Methods, Journal of the American Helicopter Society, vol.48, issue.2, pp.128-138, 2003.
DOI : 10.4050/JAHS.48.128

C. Benoit, G. Jeanfaivre, and S. Péron, Nouveaux développements liésliésà la technique Chimère. Tranche 1 du PRC AITEC, 2007.

C. Benoit, G. Jeanfaivre, and S. Péron, SHANEL Project Phase 1 -Synthesis report RTS1 -Tasks A1.a - A3.a : synthesis of Chimera and Cartesian adaptation techniques, 2008.

C. Benoit and S. Péron, Automatic structured mesh generation around two-dimensional bodies defined by polylines or PolyC1 curves, Computers & Fluids, vol.61, pp.64-76, 2012.
DOI : 10.1016/j.compfluid.2011.09.009

M. J. Berger, On Conservation at Grid Interfaces, SIAM Journal on Numerical Analysis, vol.24, issue.5, pp.967-984, 1987.
DOI : 10.1137/0724063

M. J. Berger and R. J. Leveque, An adaptive Cartesian mesh algorithm for the Euler equations in arbitrary geometries, 9th Computational Fluid Dynamics Conference, 1930.
DOI : 10.2514/6.1989-1930

M. J. Berger and J. Oliger, Adaptive mesh refinement for hyperbolic partial differential equations, Journal of Computational Physics, vol.53, issue.3, pp.484-512, 1984.
DOI : 10.1016/0021-9991(84)90073-1

T. Berglind, A hybrid structured-unstructured grid method for aerodynamic flow simulations, 33rd Aerospace Sciences Meeting and Exhibit, 1995.
DOI : 10.2514/6.1995-51

J. Bonet and J. Peraire, An alternating digital tree (ADT) algorithm for 3D geometric searching and intersection problems, International Journal for Numerical Methods in Engineering, vol.18, issue.1, pp.1-17, 1991.
DOI : 10.1002/nme.1620310102

S. Borie, J. Mosca, L. Sudre, C. Benoit, and S. Péron, Influence of rotor wakes on helicopter aerodynamic behaviour, 2009.

P. Brenner, Simulation du Mouvement Relatif de Corps Soumis a un Ecoulement Instationnaire par une Methode de Chevauchement de Maillages, 1996.

K. D. Brislawn, D. Brown, G. S. Chesshire, and J. S. Saltzman, Adaptively-refined overlapping grids for the numerical solution of systems of hyperbolic conservation laws, 1995.

P. G. Buning, I. T. Chiu, S. Obayashi, Y. M. Rizk, and J. L. Steger, Numerical simulation of the integrated space shuttle vehicle in ascent, 15th Atmospheric Flight Mechanics Conference, pp.88-4359, 1988.
DOI : 10.2514/6.1988-4359

P. G. Buning and T. H. Pulliam, Cartesian Off-Body Grid Adaption for Viscous Time-Accurate Flow Simulations, 20th AIAA Computational Fluid Dynamics Conference, 2011.
DOI : 10.2514/6.2011-3693

L. Cambier, S. Heib, and S. Plot, CFD software: input from research and feedback from industry, Mechanics & Industry, vol.14, issue.3, pp.159-174, 2013.
DOI : 10.1051/meca/2013056

URL : https://hal.archives-ouvertes.fr/hal-01293795

E. Canonne, Méthode d'adaptation de maillage pour le calcul d'´ ecoulements compressibles autour d'un rotor d'hélicoptère, Ecole Nationale Supérieure d'Arts et Métiers, 2004.

M. J. Castro-diaz, F. Hecht, B. Mohammadi, and O. Pironneau, Anisotropic unstructured mesh adaption for flow simulations, International Journal for Numerical Methods in Fluids, vol.59, issue.4, pp.475-491, 1997.
DOI : 10.1002/(SICI)1097-0363(19970830)25:4<475::AID-FLD575>3.0.CO;2-6

W. M. Chan, Overset structured hyperbolic grid generation on triangulated surfaces. AIAA paper, 2000.

W. M. Chan, Overset grid technology development at NASA Ames Research Center, Computers & Fluids, vol.38, issue.3, pp.496-503, 2009.
DOI : 10.1016/j.compfluid.2008.06.009

W. M. Chan and P. G. Buning, Surface grid generation methods for overset grids, Computers & Fluids, vol.24, issue.5, pp.509-522, 1995.
DOI : 10.1016/0045-7930(95)00003-U

W. M. Chan and J. L. Steger, A generalized scheme for three-dimensional hyperbolic grid generation, 10th Computational Fluid Dynamics Conference, 1991.
DOI : 10.2514/6.1991-1588

J. S. Chow, G. Z. Zilliac, and P. Bradshaw, Mean and Turbulence Measurements in the Near Field of a Wingtip Vortex, AIAA Journal, vol.35, issue.10, pp.1561-1567, 1997.
DOI : 10.2514/2.1

M. J. Churchfield and G. A. , Numerical Simulations of a Wingtip Vortex in the Near Field, Journal of Aircraft, vol.46, issue.1, pp.230-243, 2009.
DOI : 10.2514/1.38086

P. H. Cook, M. A. Mcdonald, and M. C. Firmin, Aerofoil RAE 2822 -Pressure Distributions and Boundary Layer and Wake Measurements, In AGARD Report AR, vol.138, 1979.

J. Dacles-mariani, G. Z. Zilliac, J. S. Chow, and P. Bradshaw, Numerical/experimental study of a wingtip vortex in the near field, AIAA Journal, vol.33, issue.9, pp.1561-1568, 1995.
DOI : 10.2514/3.12826

R. A. Finkel and F. L. Bentley, Quad trees a data structure for retrieval on composite keys, Acta Informatica, vol.4, issue.1, pp.1-9, 1974.
DOI : 10.1007/BF00288933

P. L. George and H. Borouchaki, Delaunay triangulation and meshing : application to finite elements, HERMES, 1998.

V. Gleize, M. Costes, H. F. Von-geyr, N. Kroll, P. Renzoni et al., Helicopter fuselage drag prediction - State of the art in Europe, 39th Aerospace Sciences Meeting and Exhibit, 2001.
DOI : 10.2514/6.2001-999

R. J. Gomez and E. C. Ma, Validation of a large scale chimera grid system for the Space Shuttle Launch Vehicle, 12th Applied Aerodynamics Conference, 1994.
DOI : 10.2514/6.1994-1859

W. Gordon and C. Hall, Construction of curvilinear co-ordinate systems and applications to mesh generation, International Journal for Numerical Methods in Engineering, vol.18, issue.4, pp.461-477, 1973.
DOI : 10.1002/nme.1620070405

W. D. Henshaw, Overture: An Object-Oriented Framework for Overlapping Grid Applications, 32nd AIAA Fluid Dynamics Conference and Exhibit, 2002.
DOI : 10.2514/6.2002-3189

URL : http://digital.library.unt.edu/ark:/67531/metadc735576/m2/1/high_res_d/802822.pdf

W. D. Henshaw and D. W. Schwendeman, An adaptive numerical scheme for high-speed reactive flow on overlapping grids, Journal of Computational Physics, vol.191, issue.2, pp.420-447, 2003.
DOI : 10.1016/S0021-9991(03)00323-1

W. D. Henshaw and D. W. Schwendeman, Moving overlapping grids with adaptive mesh refinement for high-speed reactive and non-reactive flow, Journal of Computational Physics, vol.216, issue.2, pp.744-779, 2006.
DOI : 10.1016/j.jcp.2006.01.005

W. D. Henshaw and D. W. Schwendeman, Parallel computation of three-dimensional flows using overlapping grids with adaptive mesh refinement, Journal of Computational Physics, vol.227, issue.16, pp.7469-7502, 2008.
DOI : 10.1016/j.jcp.2008.04.033

T. L. Holst and T. H. Pulliam, Overset Solution Adaptive Grid Approach Applied to Hovering Rotorcraft Flows, 27th AIAA Applied Aerodynamics Conference, 2009.
DOI : 10.2514/6.2009-3519

Y. Ito, A. M. Shih, and B. K. Soni, Octree-based reasonable-quality hexahedral mesh generation using a new set of refinement templates, International Journal for Numerical Methods in Engineering, vol.45, issue.1, pp.1809-1833, 2009.
DOI : 10.1002/fld.669

A. Jameson, W. Schmidt, and E. Turkel, Numerical solution of the Euler equations by finite volume methods using Runge Kutta time stepping schemes, 14th Fluid and Plasma Dynamics Conference, pp.81-1259, 1981.
DOI : 10.2514/6.1981-1259

G. Jeanfaivre, C. Benoit, and M. Pape, Improvement of the Robustness of the Chimera Method, 32nd AIAA Fluid Dynamics Conference and Exhibit, 2002.
DOI : 10.2514/6.2002-3290

S. J. Kamkar, A. M. Wissink, A. Jameson, and V. Sankaran, Feature-Driven Cartesian Adaptive Mesh Refinement in the HELIOS Code, 2010.

S. J. Kamkar, A. M. Wissink, V. Sankaran, and A. Jameson, Feature-driven Cartesian adaptive mesh refinement for vortex-dominated flows, Journal of Computational Physics, vol.230, issue.16, pp.6271-6298, 2011.
DOI : 10.1016/j.jcp.2011.04.024

K. H. Kao and M. S. Liou, Advance in overset grid schemes - From Chimera to DRAGON grids, AIAA Journal, vol.33, issue.10, pp.1809-1815, 1995.
DOI : 10.2514/3.12921

Y. Lee and J. D. Baeder, Implicit Hole Cutting - A New Approach to Overset Grid Connectivity, 16th AIAA Computational Fluid Dynamics Conference, 2003.
DOI : 10.2514/6.2003-4128

A. Lerat and Z. N. Wu, Stable Conservative Multidomain Treatments for Implicit Euler Solvers, Journal of Computational Physics, vol.123, issue.1, pp.45-54, 1996.
DOI : 10.1006/jcph.1996.0004

M. S. Liou, A Sequel to AUSM: AUSM+, Journal of Computational Physics, vol.129, issue.2, pp.364-382, 1996.
DOI : 10.1006/jcph.1996.0256

M. S. Liou, A sequel to AUSM, Part II: AUSM+-up for all speeds, Journal of Computational Physics, vol.214, issue.1, pp.137-170, 2006.
DOI : 10.1016/j.jcp.2005.09.020

P. Macneice, K. M. Olson, C. Mobarry, R. De-fainchtein, and C. Packer, PARAMESH: A parallel adaptive mesh refinement community toolkit, Computer Physics Communications, vol.126, issue.3, pp.330-354, 2000.
DOI : 10.1016/S0010-4655(99)00501-9

A. Madrane, A. Raichle, and A. Sturmer, Parallel Implementation of a Dynamic Overset Unstructured Grid Approach, ECCOMAS, 2004.
DOI : 10.1007/3-540-31801-1_106

K. W. Mcalister and R. K. Takahashi, NACA 0015 Wing Pressure and Trailing Vortex Measurements. NASA Technical Paper 91-A-003, 1991.

R. L. Meakin, Moving body overset grid methods for complete aircraft tiltrotor simulations, 11th Computational Fluid Dynamics Conference, 1993.
DOI : 10.2514/6.1993-3350

R. L. Meakin, An efficient means of adaptive refinement within systems of overset grids. AIAA paper, pp.95-1722, 1995.

R. L. Meakin, Adaptive spatial partitioning and refinement for overset structured grids, Computer Methods in Applied Mechanics and Engineering, vol.189, issue.4, pp.1077-1117, 2000.
DOI : 10.1016/S0045-7825(99)00369-2

R. L. Meakin, Automatic off-body grid generation for domains of arbitrary size, 15th AIAA Computational Fluid Dynamics Conference, 2001.
DOI : 10.2514/6.2001-2536

R. L. Meakin, Object X-rays for cutting holes in composite overset structured grids, 15th AIAA Computational Fluid Dynamics Conference, 2001.
DOI : 10.2514/6.2001-2537

R. L. Meakin, A. M. Wissink, W. M. Chan, S. A. Pandya, and J. Sitaraman, On Strand Grids for Complex Flows, 18th AIAA Computational Fluid Dynamics Conference, 2007.
DOI : 10.2514/6.2007-3834

R. Mittal and G. Iaccarino, IMMERSED BOUNDARY METHODS, Annual Review of Fluid Mechanics, vol.37, issue.1, pp.239-261, 2005.
DOI : 10.1146/annurev.fluid.37.061903.175743

V. Moureau, P. Domingo, and L. Vervisch, Design of a massively parallel CFD code for complex geometries, Comptes Rendus M??canique, vol.339, issue.2-3, pp.141-148, 2011.
DOI : 10.1016/j.crme.2010.12.001

S. Pandya and W. M. Chan, Automation of Structured Overset Mesh Generation for Rocket Geometries, 19th AIAA Computational Fluid Dynamics, 2009.
DOI : 10.2514/6.2009-3993

S. J. Parks, P. G. Buning, W. M. Chan, and J. L. Steger, Collar grids for intersecting geometric components within the Chimera overlapped grid scheme, 10th Computational Fluid Dynamics Conference, pp.672-682, 1991.
DOI : 10.2514/6.1991-1587

S. Péron and C. Benoit, Off-body Overset adaptive Cartesian mesh method based on an octree approach, 2011.

S. Péron, C. Benoit, P. Raud, and S. Landier, Cassiopée : Pre and Post-processing for CFD Python/CGNS Workflow. ONERA Scientific Day on CFD Workflow : Meshing, Solving, Visualizing, 2012.

C. S. Peskin, Numerical analysis of blood flow in the heart, Journal of Computational Physics, vol.25, issue.3, pp.220-252, 1977.
DOI : 10.1016/0021-9991(77)90100-0

C. S. Peskin, The immersed boundary method, Acta numerica, vol.11, pp.479-517, 2002.

T. Renaud, M. Costes, and S. Péron, Computation of GOAHEAD configuration with Chimera assembly, Aerospace Science and Technology, vol.19, issue.1, pp.50-57, 2012.
DOI : 10.1016/j.ast.2011.07.001

T. Renaud, A. L. Pape, and S. Péron, Numerical analysis of hub and fuselage drag breakdown of a helicopter configuration, CEAS Aeronautical Journal, vol.19, issue.1, pp.409-419, 2013.
DOI : 10.1007/s13272-013-0081-0

T. Renaud, G. Perez, C. Benoit, G. Jeanfaivre, and S. Péron, Blade-vortex interaction capture by CFD, 2008.

A. A. Requicha, Representations for Rigid Solids: Theory, Methods, and Systems, ACM Computing Surveys, vol.12, issue.4, pp.437-464, 1980.
DOI : 10.1145/356827.356833

D. L. Rigby, E. Steinthorsson, and W. J. Coirier, Automatic block merging methodology using the method of weakest descent, 35th Aerospace Sciences Meeting and Exhibit, 1997.
DOI : 10.2514/6.1997-197

B. Rodriguez, C. Benoit, and P. Gardarein, Unsteady Computations of the Flowfield Around a Helicopter Rotor with Model Support, 43rd AIAA Aerospace Sciences Meeting and Exhibit, 2005.
DOI : 10.2514/6.2005-466

O. Saunier, Méthode d'adaptation de maillages cartésiens basée sur des schémas d'ordré elevé pour leséquationsleséquations d'Euler d'un fluide compressible. Application aux pales de rotor d'hélicoptère, Ecole Nationale Supérieure d'Arts et Métiers, 2008.

O. Saunier, C. Benoit, G. Jeanfaivre, and A. Lerat, Third-order Cartesian overset mesh adaptation method for solving steady compressible flows, International Journal for Numerical Methods in Fluids, vol.8, issue.7, pp.811-838, 2007.
DOI : 10.1002/fld.1646

. Th and . Schwarz, Development of wall treatment for Navier-Stokes computations using the Overset grid technique, 2000.

. Th and . Schwarz, The Overlapping Grid Technique for the Time-Accurate Simulation of Rotorcraft Flow, 2005.

. Th and . Schwarz, An interpolation method maintaining the wall distance for structured and unstructured overset grids, Proceedings of the CEAS 2009 European Air and Space Conference, 2009.

M. S. Shephard and M. K. Georges, Automatic three-dimensional mesh generation by the finite octree technique, International Journal for Numerical Methods in Engineering, vol.20, issue.4, pp.709-749, 1991.
DOI : 10.1002/nme.1620320406

J. Sitaraman, A. Katz, B. Jayaraman, A. M. Wissink, and V. Sankaran, Evaluation of a multi-solver paradigm for CFD using Overset unstructured and structured adaptive Cartesian grids, 2008.

G. Starius, Composite mesh difference methods for elliptic boundary value problems, Numerische Mathematik, vol.96, issue.2, pp.243-258, 1977.
DOI : 10.1007/BF01394455

G. Starius, On composite mesh difference methods for hyperbolic differential equations, Numerische Mathematik, vol.28, issue.3, pp.241-255, 1980.
DOI : 10.1007/BF01396411

J. L. Steger and D. S. Chaussee, Generation of Body-Fitted Coordinates Using Hyperbolic Partial Differential Equations, SIAM Journal on Scientific and Statistical Computing, vol.1, issue.4, pp.431-438, 1980.
DOI : 10.1137/0901031

J. L. Steger, F. C. Dougherty, and J. A. Benek, A Chimera grid scheme. in Advances in Grid Generation, ASME FED, vol.5, pp.59-69, 1983.

R. Steijl and G. Barakos, Sliding mesh algorithm for CFD analysis of helicopter rotor-fuselage aerodynamics, International Journal for Numerical Methods in Fluids, vol.108, issue.5, pp.527-549, 2008.
DOI : 10.1002/fld.1757

J. Steinbrenner, N. Wyman, and J. Chawner, Development and implementation of Gridgen's hyperbolic PDE and extrusion methods AIAA paper, 2000.

N. E. Suhs, S. E. Rogers, and W. E. Dietz, PEGASUS5 : an automated pre-processor for Overset-grid CFD, 2002.

J. F. Thompson, A general three-dimensional elliptic grid generation system on a composite block structure, Computer Methods in Applied Mechanics and Engineering, vol.64, issue.1-3, pp.377-411, 1987.
DOI : 10.1016/0045-7825(87)90047-8

A. Uzun, Y. Hussaini, and C. L. Streett, Large-Eddy Simulation of a Wing Tip Vortex on Overset Grids, AIAA Journal, vol.44, issue.6, pp.1229-1242, 2006.
DOI : 10.2514/1.17999

E. A. Volkov, A finite difference method for finite and infinite regions with piecewise smooth boundaries, Doklady, vol.168, issue.5, pp.744-747, 1966.

E. A. Volkov, The method of composite meshes for finite and infinite regions with piecewise smooth boundaries, Proc. Steklov Inst. Math, vol.96, pp.145-185, 1968.

Z. J. Wang, H. Q. Yang, and A. J. Przekwas, Implicit conservative interfacing for 3D overlapped Chimera grids, 12th Computational Fluid Dynamics Conference, pp.95-1683, 1995.
DOI : 10.2514/6.1995-1683

L. Wiart, ONERA Contribution to HiLiftPW-2. 2 nd AIAA CFD High Lift Prediction Workshop, 2012.

L. Wiart and F. Moens, Numerical Simulation of the NASA High-Lift Trap Wing with the elsA CFD Software, 30th AIAA Applied Aerodynamics Conference, 2012.
DOI : 10.2514/6.2012-2918

D. C. Wilcox, Reassessment of the scale-determining equation for advanced turbulence models, AIAA Journal, vol.26, issue.11, pp.1299-1310, 1988.
DOI : 10.2514/3.10041

A. M. Wissink, S. Kamkar, T. H. Pulliam, J. Sitaraman, and V. Sankaran, Cartesian Adaptive Mesh Refinement for Rotorcraft Wake Resolution, 28th AIAA Applied Aerodynamics Conference, 2010.
DOI : 10.2514/6.2010-4554

G. Yang, D. M. Causon, and D. M. Ingram, Calculation of compressible flows about complex moving geometries using a three-dimensional Cartesian cut cell method, International Journal for Numerical Methods in Fluids, vol.113, issue.8, pp.1121-1151, 2000.
DOI : 10.1002/1097-0363(20000830)33:8<1121::AID-FLD45>3.0.CO;2-H

M. A. Yerry and M. S. Shephard, Automatic three-dimensional mesh generation by the modified-octree technique, International Journal for Numerical Methods in Engineering, vol.11, issue.11, pp.1965-1990, 1984.
DOI : 10.1002/nme.1620201103

/. Onera, Exemple de configuration avec de nombreux composants ajoutésajoutésà une géométrie plus simple, p.15

.. Cylindre-posé-sur-un-plan, (a) maillage surfacique résultant de la marche de part et d'autre de l'intersection entre le cylindre et le plan ; (b) découpage de chaque grille surfacique en deux grilles, p.63

.. Cylindre-posé-sur-un-plan, (a) en bleu,frontì ere S 11 etfrontì ere opposée ; (b) en bleu,frontì ere opposéè a lafrontì ere S 21, p.63

D. Cas-de, d'intersection ; (b) surface (en bleu) résultant de la différence booléenne ; (c) maillages résultant de l'extrusion surfacique ; (d) maillage en collier final, p.69

C. De-la, coins gauche (a,c) et droit (b,d), p.84

.. Vue-d-'un-maillage-quadtree-autour-du-cercle-unité, avec ?h min = 0.5, D f ar = 5 ; correspondant au maillage cartésien avant fusion des blocs (b), et après fusion (c), avec v min = 4, p.91

D. Vue-détaillée, avec v min =4 pour le niveau le plus fin et v min =6 ailleurs : les grilles rouges, bleues et vertes correspondent respectivement aux niveaux de raffinement l 0 (le plus fin), l 0 ? 1 et l < l 0 ? 1, p.92

.. Lignes-de-nombre-de-mach, maillages initial (a) et adapté (b)

.. Coupes-transversales-au-voisinage-du-tourbillon, lesfrontì eres extérieures des grilles les plus fines sont représentées

D. Configuration, vue des corps du fuselage et du mât (a) avant et (b) après masquage, p.114

D. Configuration, (a) maillage surfacique de la configuration avec maillage en collier ; (b) vue détaillée près de, p.115

D. Configuration, (a) vue dans le plan de symétrie des grilles de corps et grilles cartésiennes de fond ; (b) vue détaillée près de, p.115

D. Configuration and .. Le-maillage-chimère, symétrie : champ de pression (a) pour le maillage de référence, p.117

D. Configuration, extractionàextractionà la paroi dans le plan de symétrie (a) du coefficient de pression, p.118

C. Meunier and O. François, Configuration d'avion hypersustenté, avec en couleur les différents composants maillés indépendamment (image M, p.121

.. Vue-de-la-paroi-du-maillage, Chimère du cas 1 du workshop HLPW2 (assemblage réalisé par L. Wiart), p.122

]. E. Volkov, A finite difference method for finite and infinite regions with piecewise smooth boundaries, Doklady, vol.168, issue.15, pp.744-747, 1966.

E. A. Volkov, The method of composite meshes for finite and infinite regions with piecewise smooth boundaries, Proceedings of the Steklov Institute of Mathematics 96, pp.145-185, 1968.

G. Starius, Composite mesh difference methods for elliptic boundary value problems, Numerische Mathematik, vol.96, issue.2, pp.243-258, 1977.
DOI : 10.1007/BF01394455

G. Starius, On composite mesh difference methods for hyperbolic differential equations, Numerische Mathematik, vol.28, issue.3, pp.241-255, 1980.
DOI : 10.1007/BF01396411

J. L. Steger, F. C. Dougherty, and J. A. Benek, A Chimera grid scheme, Advance in Grid Generation, pp.59-69, 1983.

J. A. Benek, J. L. Steger, and F. C. Dougherty, A flexible grid embedding technique with application to the Euler equations, 6th Computational Fluid Dynamics Conference Danvers, pp.83-1944, 1983.
DOI : 10.2514/6.1983-1944

R. J. Gomez and E. C. Ma, Validation of a large scale chimera grid system for the Space Shuttle Launch Vehicle, 12th Applied Aerodynamics Conference, pp.94-1859, 1994.
DOI : 10.2514/6.1994-1859

W. D. Henshaw, Overture: An Object-Oriented Framework for Overlapping Grid Applications, 32nd AIAA Fluid Dynamics Conference and Exhibit, 2002.
DOI : 10.2514/6.2002-3189

W. M. Chan, Overset grid technology development at NASA Ames Research Center, Computers & Fluids, vol.38, issue.3, pp.496-503, 2009.
DOI : 10.1016/j.compfluid.2008.06.009

P. G. Buning, I. T. Chiu, S. Obayashi, Y. M. Rizk, and J. L. Steger, Numerical simulation of the integrated space shuttle vehicle in ascent, 15th Atmospheric Flight Mechanics Conference, pp.88-4359, 1988.
DOI : 10.2514/6.1988-4359

R. L. Meakin, Moving body overset grid methods for complete aircraft tiltrotor simulations, AIAA paper 93-3350, 1993.

C. Benoit and G. Jeanfaivre, Three-Dimensional Inviscid Isolated Rotor Calculations Using Chimera and Automatic Cartesian Partitioning Methods, Journal of the American Helicopter Society, vol.48, issue.2, pp.128-138, 2003.
DOI : 10.4050/JAHS.48.128

R. L. Meakin, Adaptive spatial partitioning and refinement for overset structured grids, Computer Methods in Applied Mechanics and Engineering, vol.189, issue.4, pp.1077-1117, 2000.
DOI : 10.1016/S0045-7825(99)00369-2

A. M. Wissink, S. Kamkar, T. H. Pulliam, J. Sitaraman, and V. Sankaran, Cartesian adaptive mesh refinement for rotorcraft wake resolution, AIAA paper, pp.2010-4554, 2010.
DOI : 10.2514/6.2010-4554

O. Saunier, C. Benoit, G. Jeanfaivre, and A. Lerat, Third-order Cartesian overset mesh adaptation method for solving steady compressible flows, International Journal for Numerical Methods in Fluids, vol.8, issue.7, pp.811-838, 2007.
DOI : 10.1002/fld.1646

M. Berger and J. Oliger, Adaptive mesh refinement for hyperbolic partial differential equations, Journal of Computational Physics, vol.53, issue.3, pp.484-512, 1984.
DOI : 10.1016/0021-9991(84)90073-1

K. D. Brislawn, D. Brown, G. S. Chesshire, and J. S. Saltzman, Adaptively-refined overlapping grids for the numerical solution of systems of hyperbolic conservation laws, 1995.

W. D. Henshaw and D. W. Schwendeman, An adaptive numerical scheme for high-speed reactive flow on overlapping grids, Journal of Computational Physics, vol.191, issue.2, pp.420-447, 2003.
DOI : 10.1016/S0021-9991(03)00323-1

W. D. Henshaw and D. W. Schwendeman, Moving overlapping grids with adaptive mesh refinement for high-speed reactive and non-reactive flow, Journal of Computational Physics, vol.216, issue.2, pp.744-779, 2006.
DOI : 10.1016/j.jcp.2006.01.005

W. D. Henshaw and D. W. Schwendeman, Parallel computation of three-dimensional flows using overlapping grids with adaptive mesh refinement, Journal of Computational Physics, vol.227, issue.16, pp.7469-7502, 2008.
DOI : 10.1016/j.jcp.2008.04.033

R. L. Meakin, An efficient means of adaptive refinement within systems of overset grids, AIAA paper, pp.95-1722, 1995.

T. L. Holst and T. H. Pulliam, Overset Solution Adaptive Grid Approach Applied to Hovering Rotorcraft Flows, 27th AIAA Applied Aerodynamics Conference, 2009.
DOI : 10.2514/6.2009-3519

P. G. Buning and T. H. Pulliam, Cartesian Off-Body Grid Adaption for Viscous Time-Accurate Flow Simulations, 20th AIAA Computational Fluid Dynamics Conference, 2011.
DOI : 10.2514/6.2011-3693

S. J. Kamkar, A. M. Wissink, V. Sankaran, and A. Jameson, Feature-driven Cartesian adaptive mesh refinement for vortex-dominated flows, Journal of Computational Physics, vol.230, issue.16, pp.6271-6298, 2011.
DOI : 10.1016/j.jcp.2011.04.024

T. Renaud, G. Perez, C. Benoit, G. Jeanfaivre, and S. Péron, Blade?vortex interaction capture by CFD, Forum, 2008.

T. Renaud, M. Costes, and S. Péron, Computation of GOAHEAD configuration with Chimera assembly, Aerospace Science and Technology, vol.19, issue.1, pp.50-57, 2012.
DOI : 10.1016/j.ast.2011.07.001

R. L. Meakin, Automatic off-body grid generation for domains of arbitrary size, 15th AIAA Computational Fluid Dynamics Conference, 2001.
DOI : 10.2514/6.2001-2536

P. Macneice, K. M. Olson, C. Mobarry, R. De-fainchtein, and C. Packer, PARAMESH: A parallel adaptive mesh refinement community toolkit, Computer Physics Communications, vol.126, issue.3, pp.330-354, 2000.
DOI : 10.1016/S0010-4655(99)00501-9

M. A. Yerry and M. S. Shephard, Automatic three-dimensional mesh generation by the modified-octree technique, International Journal for Numerical Methods in Engineering, vol.11, issue.11, pp.1965-1990, 1984.
DOI : 10.1002/nme.1620201103

R. A. Finkel and F. L. Bentley, Quad trees a data structure for retrieval on composite keys, Acta Informatica, vol.4, issue.1, pp.1-9, 1974.
DOI : 10.1007/BF00288933

M. S. Shephard and M. K. Georges, Automatic three-dimensional mesh generation by the finite octree technique, International Journal for Numerical Methods in Engineering, vol.20, issue.4, pp.709-749, 1991.
DOI : 10.1002/nme.1620320406

D. L. Rigby, E. Steinthorsson, and W. J. Coirier, Automatic block merging methodology using the method of weakest descent, 35th Aerospace Sciences Meeting and Exhibit, pp.97-0197, 1997.
DOI : 10.2514/6.1997-197

G. Jeanfaivre, C. Benoit, and M. C. Le-pape, Improvement of the Robustness of the Chimera Method, 32nd AIAA Fluid Dynamics Conference and Exhibit, 2002.
DOI : 10.2514/6.2002-3290

S. Péron and C. Benoit, Off-body Overset adaptive Cartesian mesh method based on an octree approach, AIAA paper 2011-3050, 2011.

A. Jameson, W. Schmidt, and E. , Numerical solution of the Euler equations by finite volume methods using Runge Kutta time stepping schemes, 14th Fluid and Plasma Dynamics Conference, pp.81-1259, 1981.
DOI : 10.2514/6.1981-1259

D. C. Wilcox, Reassessment of the scale-determining equation for advanced turbulence models, AIAA Journal, vol.26, issue.11, pp.1299-1310, 1988.
DOI : 10.2514/3.10041

S. Péron and C. Benoit, A python module for Chimera assembly, 10th Overset Grid, Symposium, 2010.

P. H. Cook, M. A. Mcdonald, and M. C. Firmin, Aerofoil RAE 2822 ? pressure distributions and boundary layer and wake measurements, AGARD Report AR, vol.138, 1979.

K. W. Mcalister and R. K. Takahashi, NACA 0015 wing pressure and trailing vortex measurements, NASA Technical Paper 91-A-003, 1991.

J. Dacles-mariani, G. Z. Zilliac, J. S. Chow, and P. Bradshaw, Numerical/experimental study of a wingtip vortex in the near field, AIAA Journal, vol.33, issue.9, pp.1561-1568, 1995.
DOI : 10.2514/3.12826

J. S. Chow, G. Z. Zilliac, and P. Bradshaw, Mean and Turbulence Measurements in the Near Field of a Wingtip Vortex, AIAA Journal, vol.35, issue.10, pp.1561-1567, 1997.
DOI : 10.2514/2.1

M. J. Churchfield and G. A. , Numerical Simulations of a Wingtip Vortex in the Near Field, Journal of Aircraft, vol.46, issue.1, pp.230-243, 2009.
DOI : 10.2514/1.38086

A. Uzun, Y. Hussaini, and C. L. Streett, Large-Eddy Simulation of a Wing Tip Vortex on Overset Grids, AIAA Journal, vol.44, issue.6, pp.1229-1242, 2006.
DOI : 10.2514/1.17999

J. Sitaraman, A. Katz, B. Jayaraman, A. M. Wissink, and V. Sankaran, Evaluation of a multi-solver paradigm for CFD using Overset unstructured and structured adaptive Cartesian grids, Journal of Computational Physics, vol.232, issue.172, pp.153-173, 2008.

A. J. Kamkar, A. Wissink, V. Jameson, and . Sankaran, Author's personal copy [48] S Feature-driven Cartesian adaptive mesh refinement in the HELIOS code, 2010.

M. S. Liou, A Sequel to AUSM: AUSM+, Journal of Computational Physics, vol.129, issue.2, pp.364-382, 1996.
DOI : 10.1006/jcph.1996.0256

R. L. Meakin, Object X-rays for cutting holes in composite overset structured grids, 15th AIAA Computational Fluid Dynamics Conference, 2001.
DOI : 10.2514/6.2001-2537

S. Péron and C. Benoit, Automatic off-body overset adaptive Cartesian mesh method based on an octree approach, Journal of Computational Physics, vol.232, issue.1, pp.153-173, 2013.
DOI : 10.1016/j.jcp.2012.07.029

. Article-paru-dans-aerospace, . Science, ]. B. Technology, A. Benoit, K. Daquin et al., Computation of GOAHEAD configuration with Chimera assembly References HOST: a general helicopter tool for Germany and France, 56th Annual Forum of the, 2000.

C. Benoit and G. Jeanfaivre, Three-Dimensional Inviscid Isolated Rotor Calculations Using Chimera and Automatic Cartesian Partitioning Methods, Journal of the American Helicopter Society, vol.48, issue.2, pp.128-138, 2003.
DOI : 10.4050/JAHS.48.128

C. Benoit, G. Jeanfaivre, and E. Canonne, Synthesis of ONERA Chimera method developed in the frame of CHANCE programme, p.31, 2005.

M. Bhagwat, A. Dimanlig, H. Saberi, E. Meadowcroft, B. Panda et al., CFD/CSD coupled trim solution for the dual-rotor CH-47 helicopter including fuselage modeling, AHS Specialists' Conference on Aeromechanics, 2008.

W. Khier, Numerical simulation of air flow past a full helicopter configuration, in: 35th European Rotorcraft Forum, 2009.

J. Kok, Improvements of two-equation turbulence models in multi-block flow solvers: free-stream dependency and transition, 1999.

R. L. Meakin, Adaptive spatial partitioning and refinement for overset structured grids, Computer Methods in Applied Mechanics and Engineering, vol.189, issue.4, pp.1077-1117, 2000.
DOI : 10.1016/S0045-7825(99)00369-2

R. L. Meakin, Object X-rays for cutting holes in composite overset structured grids, AIAA Paper, 2001.

S. Péron and C. Benoit, A python pre-processing module for Chimera assembly, 10th Overset Grid Symposium, 2010.

M. Potsdam, M. Smith, and . Renaud, Unsteady computations of rotor?fuselage interactions, 35th European Rotorcraft Forum, 2009.

M. Raffel, F. De-gregorio, W. Sheng, G. Gibertini, A. Seraudie et al., Generation of an advanced helicopter experimental aerodynamic database, European Rotorcraft Forum, p.35, 2009.
DOI : 10.1017/s0001924000005492

T. Renaud, A. Le-pape, and C. Benoit, Unsteady Euler and Navier?Stokes computations of a complete helicopter, European Rotorcraft Forum, p.31, 2005.

A. Paru, T. W. Sheehy, and D. R. Clark, Numerical analysis of hub and fuselage drag breakdown of a helicopter configuration References 1 A method for predicting helicopter hub drag, pp.75-123, 1976.

F. F. Felker, An Experimental Investigation of Hub Drag on the XH-59A, Paper Number AIAA-85-4065, AIAA 3rd Applied Aerodynamics Conference, 1985.

S. Borie, J. Mosca, L. Sudre, C. Benoit, and S. Péron, Influence of Rotor Wakes on Helicopter Aerodynamic Behaviour, 2009.

L. Chuiton, F. Kneisch, T. Schneider, S. Krämer, and P. , Industrial Validation of Numerical Aerodynamics About Rotor Heads: Towards a Design Optimisation at Eurocopter, 2009.

J. O. Bridgeman and G. T. Lancaster, Predicting Hub Drag on Realistic Geometries, 2010.

M. Dombroski and T. A. Legolf, Drag Prediction of Two Production Rotor Hub Geometries. 68th Annual Forum of the, 2012.

L. Cambier, S. Heib, and S. Plot, The ONERA elsA CFD Software: Input from Research and Feedback from Industry, 28th Congress of the International Council on the Aeronautical Sciences, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01293795

. Fig, 17 Comparison of drag coefficient for isolated and complete configurations 418 T, p.123

T. Schwarz, The GOAHEAD Project, Overview and Selected Results, 36th European Rotorcraft Forum, 2010.

T. Renaud, M. Costes, and S. Péron, Computation of GOAHEAD configuration with Chimera assembly, Aerospace Science and Technology, vol.19, issue.1, pp.50-57, 2012.
DOI : 10.1016/j.ast.2011.07.001

R. L. Meakin, An Efficient Means of Adaptive Refinement Within Systems of Overset Grids. AIAA paper, pp.95-1722, 1995.

S. Péron and C. Benoit, Automatic Off-Body Overset Adaptive Cartesian Mesh Method Based on an Octree Approach, pp.2011-3050, 2011.

C. Benoit, G. Jeanfaivre, and E. Canonne, Synthesis of ONERA Chimera Method Developed in the Frame of CHANCE Programme, 2005.

S. Péron and C. Benoit, A Python Pre-Processing Module for Chimera Assembly, 10th Overset Grid Symposium, 2010.

R. L. Meakin, Object X-rays for cutting holes in composite overset structured grids, 15th AIAA Computational Fluid Dynamics Conference, 2001.
DOI : 10.2514/6.2001-2537

S. Péron, C. Benoit, P. Raud, and S. Landier, Cassiopée: Pre-and Postprocessing for CFD Python CGNS workflow, ONERA Scientific Day on CFD Workflow: Meshing, Solving, Visualizing, 2012.

D. Destarac, CFD-Based Aircraft Drag Prediction and Reduction . von Karman Lecture Series, 2013.

R. Langtry and F. Menter, Correlation-Based Transition Modeling for Unstructured Parallelized Computational Fluid Dynamics Codes, AIAA Journal, vol.47, issue.12, pp.2894-2906, 2010.
DOI : 10.2514/1.42362