Caractérisation et modélisation du procédé de fluotournage inverse à froid du TA6V - PASTEL - Thèses en ligne de ParisTech Accéder directement au contenu
Thèse Année : 2014

Characterization and modelling of backward cold flowforming of Ti-6Al-4V

Caractérisation et modélisation du procédé de fluotournage inverse à froid du TA6V

Dorian Depriester

Résumé

Flowforming is a means to produce seamless tubes by plastic deformation at room temperature. It consists in a tubular part, mounted on a mandrel, and a couple of rollers. While the mandrel is rotating, the roller translate along the tube axis. Because of the conical shape of the roller, the tube thickness reduces by cold plastic deformation, thus the tube elongates. Thanks to the high compressive stresses and to the incremental nature of the deformation process, flowforming can lead to a high thickness reduction and thus to high elongation of the deformed tubes. Ti-6Al-4V (also known as Ti64) is an α-β titanium alloy. Because of its high strength and its low density, Ti64 is the most widely used titanium alloy in aerospace industry. Nevertheless, flowforming of this alloy is a great challenge, considering its well known poor ductility at room temperature. In order to increase the "tube spinnability" of Ti64, first the flowformed material has been extensively investigated at microscopic scale (SEM, EBSD) as well as at macroscopic scale (mechanical properties). In addition, an experimental flowforming machine, equipped with load sensors, has been designed. It has provided valuable informations about the strain mechanism occuring during flowforming; furthermore, this experimental set-up has allowed to buid an adequate constitutive law for the plastic flow. Then, this law has been used to optimize the processing parameter, in order to avoid failure during the process.
Le fluotournage est un procédé de fabrication de tubes sans soudures par déformation plastique à froid. Il consiste à réduire l'épaisseur d'une préforme tubulaire montée sur un mandrin en utilisant plusieurs molettes en translation parallèlement au tube. Grâce à la conicité des molettes, l'épaisseur du tube diminue, donc celui-ci s'allonge dans la direction de fluotournage. Le TA6V est un alliage de titane de type α-β. Ses très bonnes propriétés mécaniques et sa faible densité en font l'alliage de titane le plus utilisé dans l'industrie aéronautique. Toutefois, le fluotournage d'un tel alliage représente un vrai défi, car il est connu pour avoir une faible ductilité à température ambiante. Afin d'optimiser les conditions opératoires, permettant ainsi de très grandes déformations du TA6V, le matériau fluotourné a d'abord été analysé, tant du point de vue microscopique (MEB, EBSD) que macroscopique (propriétés mécaniques). De plus, un fluotour expérimental instrumenté a été conçu afin d'analyser les mécanismes de déformation lors de la mise en forme. Celui-ci a permis d'identifier les phénomènes microstructuraux à l'origine de la déformation et de déterminer une loi de comportement valide pour la simulation numérique. Cette dernière a enfin servi à l'optimisation des conditions opératoires.
Fichier principal
Vignette du fichier
2014ENMP0038.pdf (27.93 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01132501 , version 1 (17-03-2015)
tel-01132501 , version 2 (04-01-2016)

Identifiants

  • HAL Id : tel-01132501 , version 2

Citer

Dorian Depriester. Caractérisation et modélisation du procédé de fluotournage inverse à froid du TA6V. Mécanique des matériaux [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0038⟩. ⟨tel-01132501v2⟩
7389 Consultations
3210 Téléchargements

Partager

Gmail Facebook X LinkedIn More