R. Machining and .. Plate, 173 5.1.1 The Geometry, 173 5.1.2 Industrial Machining Process Plan . . . . . . . . . . . . . . . . . . . . . . 173

J. , F. Diaz, and M. Arizmendi, Machines for the aeronautical industry, Machine Tools for High Performance Machining, pp.399-420, 2009.

F. C. Campbell, Manufacturing Technology for Aerospace Structural Materials, Aerospace Engineering Materials Science. Elsevier Science, 2011.

R. Lusina, Website of the company specialised in the manufacturing of aerospace parts

E. A. Starke-jr and J. T. Staley, Application of modern aluminum alloys to aircraft, Progress in Aerospace Sciences, pp.131-172, 1996.
DOI : 10.1016/0376-0421(95)00004-6

E. A. Starke-jr, Historical development and present status of aluminium-lithium alloys, Aluminum-Lithium Alloys: Processing, Properties and Applications, 2013.

R. J. Bucci, C. J. Warren, and E. A. Starke, Need for New Materials in Aging Aircraft Structures, Journal of Aircraft, vol.37, issue.1, pp.122-129, 2000.
DOI : 10.2514/2.2571

R. K. Gupta, N. Nayan, G. Nagasireesha, and S. C. Sharma, Development and characterization of Al???Li alloys, Materials Science and Engineering: A, vol.420, issue.1-2, pp.228-234, 2006.
DOI : 10.1016/j.msea.2006.01.045

P. Lequeu, K. P. Smith, and A. Danielou, Aluminum-Copper-Lithium Alloy 2050 Developed for Medium to Thick Plate, Journal of Materials Engineering and Performance, vol.73, issue.2, pp.841-847, 2010.
DOI : 10.1007/s11665-009-9554-z

F. Klocke and A. Kuchle, Manufacturing Processes 1: Cutting. RWTHedition, 2011.
DOI : 10.1007/978-3-642-11979-8

Y. Wei and X. W. Wang, Computer simulation and experimental study of machining deflection due to original residual stress of aerospace thin-walled parts, The International Journal of Advanced Manufacturing Technology, vol.22, issue.3, pp.3-4260, 2006.
DOI : 10.1007/s00170-006-0470-1

S. P. Wang and S. Padmanaban, A New Approach For FEM Simulation of NC Machining Processes, AIP Conference Proceedings, pp.1371-1376, 2004.
DOI : 10.1063/1.1766720

Z. T. Tang, Z. Q. Liu, and X. Ai, Optimization of Bulkhead Processing Sequence for Multi- Frame Monolithic Components by FEM, Advanced Materials Research, pp.24-25355, 2007.

J. K. Rai and P. Xirouchakis, Finite element method based machining simulation environment for analyzing part errors induced during milling of thin-walled components, International Journal of Machine Tools and Manufacture, vol.48, issue.6, pp.629-643, 2008.
DOI : 10.1016/j.ijmachtools.2007.11.004

J. K. Rai and P. Xirouchakis, FEM-based prediction of workpiece transient temperature distribution and deformations during milling, The International Journal of Advanced Manufacturing Technology, vol.29, issue.163, pp.429-449, 2009.
DOI : 10.1007/s00170-008-1610-6

S. Das and U. Chandra, Residual Stress and Distortion," in Handbook of Aluminum Metallurgy: Processes and Equipment, 1999.

G. E. Totten and D. S. Mackenzie, Handbook of Aluminum: Physical Metallurgy and Processes. Handbook of Aluminum, 2003.
DOI : 10.1201/9780203912591

V. Hauk, Structural and Residual Stress Analysis by Nondestructive Methods: Evaluation - Application -Assessment, 1997.

H. K. Bhadeshia, Residual stress: Material factors. Handbook of Residual Stress and Deformation of Steel, pp.3-10, 2002.

U. Dilthey, Lecture notes: Welding technology 2 -welding metallurgy, pp.21-30, 2005.

P. J. Withers and H. K. Bhadeshia, Residual stress. Part 1 ??? Measurement techniques, Materials Science and Technology, vol.17, issue.6, pp.355-365, 2001.
DOI : 10.1179/mst.1996.12.2.121

W. Sim, Challenges of residual stress and part distortion in the civil airframe industry, International Journal of Microstructure and Materials Properties, vol.5, issue.4/5, pp.446-455, 2010.
DOI : 10.1504/IJMMP.2010.037621

J. R. Davis, J. R. Associates, and A. S. Committee, Aluminum and Aluminum Alloys. ASM specialty handbook, 1993.

G. Hammersley, L. A. Hackel, and F. Harris, Surface prestressing to improve fatigue strength of components by laser shot peening, Optics and Lasers in Engineering, vol.34, issue.4-6, pp.4-6327, 2000.
DOI : 10.1016/S0143-8166(00)00083-X

T. J. Drozda, C. Wick, and R. F. , Veilleux, and Society of Manufacturing Engineers. Tool and Manufacturing Engineers Handbook: Materials, finishing and coating. TMEH series. Society of Manufacturing Engineers, 1985.

F. Heymes, B. Commet, B. Dubost, P. Lassince, P. Lequeu et al., Development of new Al alloys for distortion free machined aluminium aircraft components

M. B. Prime, Residual Stress Measurement by Successive Extension of a Slot: The Crack Compliance Method, Applied Mechanics Reviews, vol.52, issue.2, pp.75-96, 1999.
DOI : 10.1115/1.3098926

H. Ernst, The use of patent data for technological forecasting: The diffusion of CNCtechnology in the machine tool industry, Small Business Economics, vol.9, issue.4, pp.361-381, 1997.
DOI : 10.1023/A:1007921808138

X. W. Xu and S. T. Newman, Making CNC machine tools more open, interoperable and intelligent???a review of the technologies, Computers in Industry, vol.57, issue.2, pp.141-152, 2006.
DOI : 10.1016/j.compind.2005.06.002

J. A. Bokhorst, J. Slomp, and N. C. Suresh, An integrated model for part-operation allocation and investments in CNC technology, International Journal of Production Economics, vol.75, issue.3, pp.267-285, 2002.
DOI : 10.1016/S0925-5273(01)00118-9

S. T. Newman, A. Nassehi, X. W. Xu, R. S. Jr, L. Wang et al., Strategic advantages of interoperability for global manufacturing using CNC technology, Robotics and Computer-Integrated Manufacturing, vol.24, issue.6, pp.24699-708, 2008.
DOI : 10.1016/j.rcim.2008.03.002

M. Weck and D. Staimer, Parallel Kinematic Machine Tools ??? Current State and Future Potentials, CIRP Annals - Manufacturing Technology, vol.51, issue.2, pp.671-683, 2002.
DOI : 10.1016/S0007-8506(07)61706-5

H. Chanal, E. Duc, and P. Ray, A study of the impact of machine tool structure on machining processes, International Journal of Machine Tools and Manufacture, vol.46, issue.2, pp.98-106, 2006.
DOI : 10.1016/j.ijmachtools.2005.05.004

M. Safaieh, A. Nassehi, and S. T. Newman, A novel methodology for cross-technology interoperability in CNC machining, Robotics and Computer-Integrated Manufacturing, vol.29, issue.3, pp.79-87, 2013.
DOI : 10.1016/j.rcim.2012.04.016

H. K. Toenshoff and B. Denkena, Basics of Cutting and Abrasive Processes, 2013.
DOI : 10.1007/978-3-642-33257-9

M. E. Merchant, Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip, Journal of Applied Physics, vol.16, issue.5, pp.267-318, 1945.
DOI : 10.1063/1.1707586

A. P. Markopoulos, Finite Element Method in Machining Processes, SpringerBriefs in Applied Sciences and Technology, 2012.
DOI : 10.1007/978-1-4471-4330-7

E. H. Lee and B. W. Shaffer, The theory of plasticity applied to a problem of machining, ASME Journal of Applied Mechanics, vol.73, pp.405-413, 1951.

G. C. Lin, Prediction of cutting forces and chip geometry in oblique machining from flow stress properties and cutting conditions, International Journal of Machine Tool Design and Research, vol.18, issue.3, pp.117-130, 1978.
DOI : 10.1016/0020-7357(78)90003-3

P. L. Oxley, The mechanics of machining: an analytical approach to assessing machinability . Ellis Horwood series in mechanical engineering, 1989.

. Hoppe, Experimental and numerical analysis of chip formation in metal cutting, 2003.

P. J. Arrazola, T. Özel, D. Umbrello, M. Davies, and I. S. Jawahir, Recent advances in modelling of metal machining processes, CIRP Annals - Manufacturing Technology, vol.62, issue.2, pp.695-718, 2013.
DOI : 10.1016/j.cirp.2013.05.006

H. T. Young, P. Mathew, and P. L. Oxley, Predicting cutting forces in face milling, International Journal of Machine Tools and Manufacture, vol.34, issue.6, pp.771-783, 1994.
DOI : 10.1016/0890-6955(94)90058-2

H. Q. Zheng, X. P. Li, Y. S. Wong, and A. Y. Nee, Theoretical modelling and simulation of cutting forces in face milling with cutter runout, International Journal of Machine Tools and Manufacture, vol.39, issue.12, pp.392003-2018, 1999.
DOI : 10.1016/S0890-6955(99)00023-1

X. Li, A. Y. Nee, Y. Wong, and H. Zheng, Theoretical modelling and simulation of milling forces, Journal of Materials Processing Technology, vol.89, issue.90, pp.89-90266, 1999.
DOI : 10.1016/S0924-0136(99)00076-X

H. Z. Li, W. B. Zhang, and X. P. Li, Modelling of cutting forces in helical end milling using a predictive machining theory, International Journal of Mechanical Sciences, vol.43, issue.8, pp.431711-1730, 2001.
DOI : 10.1016/S0020-7403(01)00020-0

J. Fleischer, R. Pabst, and S. Kelemen, Heat Flow Simulation for Dry Machining of Power Train Castings, CIRP Annals - Manufacturing Technology, vol.56, issue.1, pp.117-122, 2007.
DOI : 10.1016/j.cirp.2007.05.030

R. Pabst, J. Fleischer, and J. Michna, Modelling of the heat input for face-milling processes . CIRP Annals -Manufacturing Technology Cutting temperature: prediction and measurement methods?a review, Journal of Materials Processing Technology, vol.59, issue.88, pp.121-1241, 1999.

N. A. Abukhshim, P. T. Mativenga, and M. A. Sheikh, Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining, International Journal of Machine Tools and Manufacture, vol.46, issue.7-8, pp.782-800, 2006.
DOI : 10.1016/j.ijmachtools.2005.07.024

L. R. De-león and . García, Residual Stress and Part Distortion in Milled Aerospace Aluminium, 2010.

Z. T. Tang, Z. Q. Liu, Y. Wan, and X. Ai, Study on Residual Stresses in Milling Aluminium Alloy 7050-T7451, Advanced Design and Manufacture to Gain a Competitive Edge, pp.169-178, 2008.
DOI : 10.1007/978-1-84800-241-8_18

D. J. Richardson, M. A. Keavey, and F. Dailami, Modelling of cutting induced workpiece temperatures for dry milling, International Journal of Machine Tools and Manufacture, vol.46, issue.10, pp.1139-1145, 2006.
DOI : 10.1016/j.ijmachtools.2005.08.008

C. Ming, S. Fanghong, W. Haili, Y. Renwei, Q. Zhenghong et al., Experimental research on the dynamic characteristics of the cutting temperature in the process of high-speed milling, Journal of Materials Processing Technology, vol.138, issue.1-3, pp.1-3468, 2003.
DOI : 10.1016/S0924-0136(03)00120-1

B. Denkena, L. De, L. Garcia, and J. Köhler, FEM-simulation of high-performancemilling, Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations, pp.149-156, 2007.

K. H. Fuh and C. F. Wu, A residual-stress model for the milling of aluminum alloy (2014-T6), Journal of Materials Processing Technology, vol.51, issue.1-4, pp.1-487, 1995.
DOI : 10.1016/0924-0136(94)01355-5

J. C. Su, K. A. Young, K. Ma, S. Srivatsa, J. B. Morehouse et al., Modeling of residual stresses in milling, The International Journal of Advanced Manufacturing Technology, vol.116, issue.3, pp.5-8717, 2013.
DOI : 10.1007/s00170-012-4211-3

B. Denkena, L. De-león-garcía, and J. Köhler, Influence of high performance cutting operations on the residual stresses of aluminum structural workpieces, 25 t h Congress of International Council of the Aeronautical Sciences, 2006.

B. Denkena, D. Boehnke, and L. León, Machining induced residual stress in structural aluminum parts, Production Engineering, vol.2, issue.3, pp.247-253, 2008.
DOI : 10.1007/s11740-008-0097-1

B. Denkena and L. De-león, Machining induced residual stress in wrought aluminium parts, Proceedings of 2 nd International Conference on Distortion Engineering, pp.107-114, 2008.

B. Denkena and L. Leon, Milling induced residual stresses in structural parts out of forged aluminium alloys, International Journal of Machining and Machinability of Materials, vol.4, issue.4, pp.335-344, 2008.
DOI : 10.1504/IJMMM.2008.023717

F. Valiorgue, J. Rech, H. Hamdi, P. Gilles, and J. M. Bergheau, A new approach for the modelling of residual stresses induced by turning of 316L, Journal of Materials Processing Technology, vol.191, issue.1-3, pp.1-3270, 2007.
DOI : 10.1016/j.jmatprotec.2007.03.021

N. Guillemot, B. Beaubier, T. Braham, C. Lartigue, and R. Billardon, A Hybrid Approach to Predict Residual Stresses Induced by Ball-End Tool Finishing Milling of a Bainitic Steel, Advanced Materials Research, vol.223, pp.391-400, 2011.
DOI : 10.4028/www.scientific.net/AMR.223.391

A. Y. Nee, Z. J. Tao, and A. S. Kumar, An Advanced Treatise On Fixture Design And Planning. Manufacturing Systems and Technology Series, World Scientific, 2004.

A. Y. Nee, K. Whybrew, and A. S. Kumar, Advanced Fixture Design for FMS. Advanced Manufacturing, 2011.

E. Hoffman, Jig and Fixture Design. Delmar learning drafting series, Cengage Learning, 2003.

W. E. Boyes and R. Bakerjian, Handbook of Jig and Fixture Design, Society of Manufacturing Engineers, 1989.

P. H. Joshi, Jigs and Fixtures. Tata McGraw-Hill Education, 2010.

W. Zhong and S. J. Hu, Modeling Machining Geometric Variation in a N-2-1 Fixturing Scheme, Journal of Manufacturing Science and Engineering, vol.128, issue.1, pp.213-219, 2006.
DOI : 10.1115/1.2114927

E. C. De and . Meter, Min-max load model for optimizing machining fixture performance, Journal of Engineering for Industry, vol.117, issue.2, pp.186-193, 1995.

B. Li and S. N. Melkote, Improved workpiece location accuracy through fixture layout optimization, International Journal of Machine Tools and Manufacture, vol.39, issue.6, pp.871-883, 1999.
DOI : 10.1016/S0890-6955(98)00072-8

B. Li and S. N. Melkote, Optimal Fixture Design Accounting for the Effect of Workpiece Dynamics, International Journal of Advanced Manufacturing Technology, vol.18, issue.10, pp.701-707, 2001.
DOI : 10.1007/PL00003951

J. N. Asante, A combined contact elasticity and finite element-based model for contact load and pressure distribution calculation in a frictional workpiece-fixture system, The International Journal of Advanced Manufacturing Technology, vol.24, issue.2/1, pp.5-6578, 2008.
DOI : 10.1007/s00170-007-1187-5

J. D. Lee and L. S. Haynes, Finite-Element Analysis of Flexible Fixturing System, Journal of Engineering for Industry, vol.109, issue.2, pp.134-139, 1987.
DOI : 10.1115/1.3187103

S. Satyanarayana, S. N. Melkote, S. P. Siebenaler, and S. N. Melkote, Finite element modeling of fixture???workpiece contacts: single contact modeling and experimental verification, International Journal of Machine Tools and Manufacture, vol.44, issue.9, pp.903-91351, 2004.
DOI : 10.1016/j.ijmachtools.2004.02.010

Y. Wang, X. Chen, N. Gindy, and J. Xie, Elastic deformation of a fixture and turbine blades system based on finite element analysis, The International Journal of Advanced Manufacturing Technology, vol.13, issue.1, pp.3-4296, 2008.
DOI : 10.1007/s00170-006-0841-7

K. S. Kumar and G. Paulraj, Analysis and optimization of fixture under dynamic machining condition with chip removal effect, Journal of Intelligent Manufacturing, vol.24, issue.3, pp.85-98, 2014.
DOI : 10.1007/s10845-012-0677-y

H. Dong and Y. Ke, Study on Machining Deformation of Aircraft Monolithic Component by FEM and Experiment, Chinese Journal of Aeronautics, vol.19, issue.3, pp.247-254, 2006.
DOI : 10.1016/S1000-9361(11)60352-X

H. C. Kim and M. Y. Yang, Incomplete mesh-based tool path generation for optimum zigzag milling, The International Journal of Advanced Manufacturing Technology, vol.42, issue.1, pp.803-813, 2008.
DOI : 10.1007/s00170-006-0757-2

V. Pateloup, E. Duc, and P. Ray, Corner optimization for pocket machining, International Journal of Machine Tools and Manufacture, vol.44, issue.12-13, pp.12-131343, 2004.
DOI : 10.1016/j.ijmachtools.2004.04.011

M. B. Bieterman and D. R. Sandstrom, A Curvilinear Tool-Path Method for Pocket Machining, Journal of Manufacturing Science and Engineering, vol.125, issue.4, pp.709-715, 2003.
DOI : 10.1115/1.1596579

J. Mayr, M. Ess, S. Weikert, and K. Wegener, Compensation of thermal effects on machine tools using a FDEM simulation approach, Proceedings Lamdamap, 2009.

F. Poulhaon, M. Rauch, A. Leygue, J. Y. Hascoet, and F. Chinesta, Toward a Real Time Control of Toolpath in Milling Processes, Key Engineering Materials, vol.554, issue.557, pp.706-713, 2013.
DOI : 10.4028/www.scientific.net/KEM.554-557.706

F. Poulhaon, M. Rauch, A. Leygue, J. Y. Hascoet, and F. Chinesta, Online Prediction of Machining Distortion of Aeronautical Parts Caused by Re-Equilibration of Residual Stresses, Key Engineering Materials, Proceeding of the 17 t h annual ESAFORM Conference on Material Forming, pp.611-612, 2014.
DOI : 10.4028/www.scientific.net/KEM.611-612.1327

Q. C. Wang, X. D. Hu, W. Li, and J. L. Yuan, Numerical Simulation of Machining Distortion of Residually Stressed Aircraft Aluminum Components, Key Engineering Materials, vol.315, issue.316, pp.315-316235, 2006.
DOI : 10.4028/www.scientific.net/KEM.315-316.235

Y. B. Bi, H. Y. Dong, Q. L. Cheng, and Y. L. Ke, Distortion Prediction of Aerospace Monolithic Components due to Milling Process, Key Engineering Materials, vol.392, issue.394, pp.392-394841, 2009.
DOI : 10.4028/www.scientific.net/KEM.392-394.841

W. Bai, R. Hu, and X. Zhu, Finite element simulation and analysis of part deformation induced during milling of thin-walled aerospace monolithic structure parts, proceedings of the International Conference on Intelligent Computing and Intelligent Systems (ICIS), pp.440-444, 2010.

Y. Yang, Y. Wang, and C. Li, Study on Machining Distortion of Titanium Alloy Aircraft Monolithic Component by Finite Element Method and Experiment, Advanced Science Letters, vol.4, issue.8, pp.3206-3210, 2011.
DOI : 10.1166/asl.2011.1455

Y. W. Liu, Numerical Simulation of the Machining Distortion of Aircraft Aluminum Part Caused by Redistribution of Residual Stress, Advanced Materials Research, vol.142, pp.122-125, 2011.
DOI : 10.4028/www.scientific.net/AMR.142.122

M. Zhongyi and W. Yunqiao, Analyzing distortion of aircraft Structural part in NC machining based on FEM simulation, 2010 International Conference on Mechanical and Electrical Technology, pp.1-5, 2010.
DOI : 10.1109/ICMET.2010.5598480

K. Ma, R. Goetz, and S. K. Svrivatsa, Modeling of Residual Stress and Machining Distortion in Aerospace Components, pp.386-407, 2010.

T. D. Marusich, S. Usui, and K. J. Marusich, Finite Element Modeling of Part Distortion, Intelligent Robotics and Applications, pp.329-338, 2008.
DOI : 10.1007/978-3-540-88518-4_36

O. Pierard, J. Barboza, M. Duflot, and L. D-'alvise, Relaxation of residual stresses during multi-passes machining: Simulation with the level-set method and process optimization, 8 t h . World Congress on Computational Mechanics (WCCM8), pp.623-629, 2008.

O. Pierard, J. Barboza, M. Duflot, L. D-'alvise, and A. Perez-duarte, Distortions prediction during multi-pass machining simulations by using the level-set method, International Journal of Material Forming, vol.6, issue.S1, pp.563-565, 2008.
DOI : 10.1007/s12289-008-0318-3

B. Wucher1, P. Martiny1, O. Pierard1, H. Minnebo1, and L. F. , Simulation de cuisson et d'usinage de composites à fibres longues, 10 ème colloque national en calcul des structures, 2011.

A. Del-prete, A. A. De-vitis, and R. Franchi, Numerical-Experimental Correlation of Distortions Induced by Machining Process on Thin-Walled Nickel Super Alloy Forged Components, Key Engineering Materials, vol.504, issue.506, pp.504-5061299, 2012.
DOI : 10.4028/www.scientific.net/KEM.504-506.1299

J. K. Rai, FEM-MILL: A Finite Element Based 3D Transient Milling Simulation Environment for Process Plan Verification and Optimization, 2008.

L. Masset and J. F. Debongnie, Machining processes simulation: specific finite element aspects, Journal of Computational and Applied Mathematics, vol.168, issue.1-2, pp.309-320, 2004.
DOI : 10.1016/j.cam.2003.06.010

Y. Yang, M. Li, and K. R. Li, Comparison and analysis of main effect elements of machining distortion for aluminum alloy and titanium alloy aircraft monolithic component, The International Journal of Advanced Manufacturing Technology, vol.392, issue.394
DOI : 10.1007/s00170-013-5431-x

J. L. Chenot, Three dimensional finite element modeling of forging process, Computational Plasticity: Models, Software and Applications Proceedings of the Second International Conference Held in, pp.793-816, 1989.

D. N. Arnold, F. Brezzi, and M. Fortin, A stable finite element for the stokes equations, Calcolo, vol.21, issue.4, pp.337-344, 1984.
DOI : 10.1007/BF02576171

T. Coupez, H. Digonnet, and R. Ducloux, Parallel meshing and remeshing, Applied Mathematical Modelling, vol.25, issue.2, pp.153-175, 2000.
DOI : 10.1016/S0307-904X(00)00045-7
URL : https://hal.archives-ouvertes.fr/hal-00536635

M. Rappaz, M. Bellet, and M. Deville, Modélisation numérique en science et génie des matériaux. Traité des matériaux, 1998.

C. Gay, Contribution à la simulation numérique tridimensionnelle du forgeage à froid, 1995.

J. Barboza, Traitement de contact entre corps déformables et calcul parallèle pour la simulation 3D du forgeage multicorps, 2004.

E. Perchat, Mini element et factorisations incomplètes pour la parallélisation d'un solveur de stokes 2D. Application au forgeage, 2000.

C. Aliaga, Simulation numérique par éléments finis en 3D du comportement thermomécanique au cours du traitement thermique d'aciers : application à la trempe de pièces forgées ou coulées, 2000.

K. Mocellin, Contribution à la simulation numérique tridimensionnelle du forgeage à chaud : étude du contact et calcul multigrille, 1999.

P. Wriggers, Computational Contact Mechanics, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00466790

L. Fourment, J. L. Chenot, and K. Mocellin, Numerical formulations and algorithms for solving contact problems in metal forming simulation, International Journal for Numerical Methods in Engineering, vol.112, issue.9, pp.1435-1462, 1999.
DOI : 10.1002/(SICI)1097-0207(19991130)46:9<1435::AID-NME707>3.0.CO;2-9
URL : https://hal.archives-ouvertes.fr/hal-00541005

J. Chenot, L. Fourment, and K. Mocellin, Numerical treatment of contact and friction in FE simulation of forming processes, Journal of Materials Processing Technology, vol.125, issue.126, pp.125-12645, 2002.
DOI : 10.1016/S0924-0136(02)00416-8
URL : https://hal.archives-ouvertes.fr/hal-00613079

S. Fayolle, Modélisation numérique de la mise en forme et de la tenue mécanique des assemblages par déformation plastique: application au rivetage auto-poinçonneur, 2008.

T. Coupez, L. Fourment, and J. L. Chenot, Adaptive solutions in industrial forming process simulation, Advances in Adaptive Computational Methods in Mechanics, pp.365-381, 1998.
DOI : 10.1016/S0922-5382(98)80021-4
URL : https://hal.archives-ouvertes.fr/hal-01462045

R. Boussetta, Estimateurs d'erreur et ramaillage adaptatif: application à la simulation 3D des procédés de mise en forme des matériaux, 2005.

X. Cerutti and K. Mocellin, Parallel finite element tool to predict distortion induced by initial residual stresses during machining of aeronautical parts, International Journal of Material Forming, vol.84, issue.2, pp.1-14, 2014.
DOI : 10.1007/s12289-014-1164-0
URL : https://hal.archives-ouvertes.fr/hal-01024385

M. B. Prime and M. R. Hill, Residual stress, stress relief, and inhomogeneity in aluminum plate, Scripta Materialia, vol.46, issue.1, pp.77-82, 2002.
DOI : 10.1016/S1359-6462(01)01201-5

S. Marie, Un modèle de parallélisation SPMD pour la simulation numérique de procédés de mise en forme de matériaux, 1997.

H. Digonnet, Repartitionnement dynamique, mailleur parallèle et leurs applications à la simulation numérique en mise en forme des matériaux, 2001.

M. Snir, S. Otto, S. Huss-lederman, D. Walker, and J. Dongarra, MPI-The Complete Reference, p.2, 1998.

S. Osher and R. P. Fedkiw, Level Set Methods: An Overview and Some Recent Results, Journal of Computational Physics, vol.169, issue.2, pp.463-502, 2001.
DOI : 10.1006/jcph.2000.6636

K. Y. Lervag, B. Muller, and S. T. Munkejord, Calculation of the interface curvature and normal vector with the level-set method, Computers & Fluids, vol.84, pp.218-230, 2013.
DOI : 10.1016/j.compfluid.2013.06.004

S. Van-der-veen, F. Heymes, J. Boselli, P. Lequeu, and P. Lassince, Low internal stress Al-Zn-Cu-Mg plates, p.683, 2006.

P. Lequeu, P. Lassince, T. Warner, and R. G. , Engineering for the future: weight saving and cost reduction initiatives, Aircraft Engineering and Aerospace Technology, vol.73, issue.2, pp.147-159, 2010.
DOI : 10.1108/00022660110386663

R. W. Schultz and M. E. Karabin, Characterization of Machining Distortion by Strain Energy Density and Stress Range, Materials Science Forum Vols. 6th European conference on residual stresses, pp.404-407, 2002.
DOI : 10.4028/www.scientific.net/MSF.404-407.61

R. G. Treuting, W. T. Jr, and . Read, A Mechanical Determination of Biaxial Residual Stress in Sheet Materials, Journal of Applied Physics, vol.22, issue.2, pp.130-134, 1951.
DOI : 10.1063/1.1699913

A. V. Virkar, Determination of Residual Stress Profile Using a Strain Gage Technique, Journal of the American Ceramic Society, vol.54, issue.2, pp.2100-2102, 1990.
DOI : 10.1111/j.1151-2916.1990.tb05276.x

. Ph, J. Jeanmart, and . Bouvaist, Finite element calculation and measurement of thermal stresses in quenched plates of high?strength 7075 aluminium alloy, Materials Science and Technology, vol.1, issue.10, pp.765-769, 1985.

R. Tandon and D. J. Green, Residual Stress Determination Using Strain Gage Measurements, Journal of the American Ceramic Society, vol.48, issue.9, pp.2628-2633, 1990.
DOI : 10.1111/j.1151-2916.1990.tb06738.x