A. Tool and .. , 160 5.2.1. The Tool's Features, p.160

P. Achard, A. Rigacci, T. Echantillac, A. Bellet, M. Aulagnier et al., Enduit isolant à base de xerogel de silice, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00800396

M. Alam, H. Singh, and M. C. Limbachiya, Vacuum Insulation Panels (VIPs) for building construction industry ??? A review of the contemporary developments and future directions, Applied Energy, vol.88, issue.11, pp.3592-602, 2011.
DOI : 10.1016/j.apenergy.2011.04.040

D. Allinson and M. Hall, Hygrothermal analysis of a stabilized rammed earth test building in the UK. Energy and Buildings, pp.845-852, 2010.

S. A. Al-sanea and M. F. Zedan, Improving thermal performance of building walls by optimizing insulation layer distribution and thickness for same thermal mass, Applied Energy, vol.88, issue.9, pp.3113-3124, 2011.
DOI : 10.1016/j.apenergy.2011.02.036

S. Al-sanea and M. F. Zedan, Effect of thermal bridges on transmission loads and thermal resistance of building walls under dynamic conditions, Applied Energy, vol.98, pp.98-584, 2012.
DOI : 10.1016/j.apenergy.2012.04.038

S. Al-sanea, M. Zedan, S. Al-ajlan, and A. Hadi, Heat Transfer Characteristics and Optimum Insulation Thickness for Cavity Walls, Journal of Building Physics, vol.26, issue.3, pp.285-307, 2003.
DOI : 10.1177/109719603027973

S. Al-sanea, M. Zedan, and S. Hussain, Effect of thermal mass on performance of insulated building walls and the concept of energy savings potential, Applied Energy, vol.89, issue.1, pp.430-472, 2012.
DOI : 10.1016/j.apenergy.2011.08.009

F. Antretter, F. Sauer, T. Schopfer, and A. Holm, Validation of a hygrothermal whole building simulation software Proc. of Building Simulation 2011, 12th Conference of International Building Performance Simulation Association, pp.1694-1701, 2011.

H. Asan, Investigation of wall's optimum insulation position from maximum time lag and minimum decrement factor point of view, Energy and Buildings, vol.32, issue.2, pp.197-203, 2000.
DOI : 10.1016/S0378-7788(00)00044-X

H. Asan, Numerical computation of time lags and decrement factors for different building materials, Building and Environment, vol.41, issue.5, pp.615-620, 2006.
DOI : 10.1016/j.buildenv.2005.02.020

H. Asan and Y. S. Sancaktar, Effects of Wall's thermophysical properties on time lag and decrement factor, Energy and Buildings, vol.28, issue.2, pp.159-166, 1998.
DOI : 10.1016/S0378-7788(98)00007-3

F. Ascione, N. Bianco, F. De-'rossi, G. Turni, and G. P. Vanoli, Different methods for the modelling of thermal bridges into energy simulation programs: Comparisons of accuracy for flat heterogeneous roofs in Italian climates, Applied Energy, vol.97, pp.405-418, 2012.
DOI : 10.1016/j.apenergy.2012.01.022

N. Aste, A. Angelotti, and M. Buzzetti, The influence of the external walls thermal inertia on the energy performance of well insulated buildings, Energy and Buildings, vol.41, issue.11, pp.1181-1188, 2009.
DOI : 10.1016/j.enbuild.2009.06.005

G. Augenbroe, Integrated building performance evaluation in the early design stages, Building and Environment, vol.27, issue.2, pp.149-161, 1992.
DOI : 10.1016/0360-1323(92)90019-L

N. Z. Azer and S. Hsu, The prediction of Thermal Sensation from Simple model of Human Physiological Regulatory Response, ASHRAE Trans, vol.83, 1977.

R. Baetens, B. P. Jelle, and A. Gustavsen, Aerogel insulation for building applications: A state-of-the-art review, Energy and Buildings, vol.43, issue.4, pp.43-761, 2011.
DOI : 10.1016/j.enbuild.2010.12.012

C. Balocco, G. Grazzini, and A. Cavalera, Transient analysis of an external building cladding, Energy and Buildings, vol.40, issue.7, pp.1273-1277, 2008.
DOI : 10.1016/j.enbuild.2007.11.008

S. Barbero, D. Marco, C. Ferrua, and A. Pereno, Analysis on existent thermal insulating plasters towards innovative applications: Evaluation methodology for a real cost-performance comparison, Energy and Buildings, vol.77, pp.40-47, 2014.
DOI : 10.1016/j.enbuild.2014.03.037

G. Barrios, G. Huelsz, and J. Rojas, Thermal performance of envelope wall/roofs of intermittent air-conditioned rooms, Applied Thermal Engineering, vol.40, pp.1-7, 2012.
DOI : 10.1016/j.applthermaleng.2012.01.051

L. Berglund, Mathematical Models for Predicting the Thermal Comfort Response of Building Occupants

Y. Berthou, Etude de parois de batiments passifs associant un materiau à changement de phase et une super isolation transparents, 2011.

A. Bisson, A. Rigacci, D. Lecomte, and P. Achard, Effective thermal conductivity of divided silica xerogel beds, Journal of Non-Crystalline Solids, vol.350, pp.379-384, 2004.
DOI : 10.1016/j.jnoncrysol.2004.08.238

URL : https://hal.archives-ouvertes.fr/hal-00528565

A. Bisson, E. Rodier, A. Rigacci, D. Lecomte, and P. Achard, Study of evaporative drying of treated silica gels, Journal of Non-Crystalline Solids, vol.350, pp.230-237, 2004.
DOI : 10.1016/j.jnoncrysol.2004.06.043

URL : https://hal.archives-ouvertes.fr/hal-00528594

M. Bojic, N. Nikolic, D. Nikolic, J. Skerlic, and I. Miletic, Toward a positive-net-energy residential building in Serbian conditions, Applied Energy, vol.88, issue.7, pp.2407-2419, 2011.
DOI : 10.1016/j.apenergy.2011.01.011

M. Bojic, F. Yik, and P. Sat, Influence of thermal insulation position in building envelope on the space cooling of high-rise residential buildings in Hong Kong, Energy and Buildings, vol.33, issue.6, pp.569-581, 2001.
DOI : 10.1016/S0378-7788(00)00125-0

A. Bolattürk, Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey, Building and Environment, vol.43, issue.6, pp.1055-1064, 2008.
DOI : 10.1016/j.buildenv.2007.02.014

S. V. Bopshetty, J. K. Nayak, and S. P. Sukhatme, Performance analysis of a solar concrete collector Energy Conversion and Management, pp.1007-1016, 1992.

A. Boyano, P. Hernandez, and O. Wolf, Energy demands and potential savings in European office buildings: Case studies based on EnergyPlus simulations, Energy and Buildings, vol.65, pp.19-28, 2013.
DOI : 10.1016/j.enbuild.2013.05.039

R. Cadiergues, Consommation de chauffage : la récupération des apports gratuits Campbell scientific hygrothermal sensor CS215; retrieved from http://s.campbellsci.com/documents, Promoclim E, 1986.

A. Campos, K. Martín, C. Mvuama, C. Garcia, M. Odriozola et al., The effect of thermal bridges on the thermal comfort of buildings, 4th International Building Physics Conference, 2009.

A. Capozzoli, A. Gorrino, and V. Corrado, A building thermal bridges sensitivity analysis, Applied Energy, vol.107, pp.229-243, 2013.
DOI : 10.1016/j.apenergy.2013.02.045

F. Cappelletti, A. Gasparella, P. Romagnoni, and P. Baggio, Analysis of the influence of installation thermal bridges on windows performance: The case of clay block walls, Energy and Buildings, vol.43, issue.6, pp.1435-1442, 2011.
DOI : 10.1016/j.enbuild.2011.02.004

Y. A. Cengel, Heat Transfer, 2005.
DOI : 10.1201/9780849338960.ch97

C. Scientifique, . Technique, and . Bâtiment, Réglementation thermique, 2000.

A. L. Chan, T. T. Chow, K. F. Fong, and Z. Lin, Investigation on energy performance of double skin fa??ade in Hong Kong, Energy and Buildings, vol.41, issue.11, pp.11-1135, 2009.
DOI : 10.1016/j.enbuild.2009.05.012

J. W. Chuah, A. Raghunathan, and N. K. Jha, ROBESim: A retrofit-oriented building energy simulator based on EnergyPlus, Energy and Buildings, vol.66, pp.88-103, 2013.
DOI : 10.1016/j.enbuild.2013.07.020

. Chiffres-clés-du-batiment, Agence de l'Environnement et de la Maîtrise de l'Energie (ADEME), 2009.

G. Clark and C. Allen, The Estimation of Atmospheric Radiation for Clear and Cloudy Skies, Proceedings 2nd National Passive Solar Conference (AS/ISES), pp.675-678, 1978.

K. Comakli and B. Yuksel, Optimum insulation thickness of external walls for energy saving, Applied Thermal Engineering, vol.23, issue.4, pp.473-479, 2003.
DOI : 10.1016/S1359-4311(02)00209-0

E. Cuce, P. M. Cuce, C. J. Wood, and S. B. Riffat, Toward aerogel based thermal superinsulation in buildings: A comprehensive review, Renewable and Sustainable Energy Reviews, vol.34, pp.273-299, 2014.
DOI : 10.1016/j.rser.2014.03.017

E. Cuce, P. M. Cuce, C. J. Wood, and S. B. Riffat, Optimizing insulation thickness and analysing environmental impacts of aerogel-based thermal superinsulation in buildings, Energy and Buildings, vol.77, pp.28-39, 2014.
DOI : 10.1016/j.enbuild.2014.03.034

M. Antoni and O. Saro, Massive Solar-Thermal Collectors: A critical literature review Renewable and Sustainable Energy Reviews, pp.3666-3679, 2012.

D. , A. M. Saro, and O. , Energy potential of a Massive Solar-Thermal Collector design in European climates, Solar Energy, vol.93, pp.195-208, 2013.

S. Dautin, Réduction de modèles thermiques de bâtiments : amélioration des techniques par modélisation des sollicitations météorologiques, Thèse de doctorat, 1997.

J. Delgado, N. Ramos, E. Barreira, and V. De-freitas, A CRITICAL REVIEW OF HYGROTHERMAL MODELS USED IN POROUS BUILDING MATERIALS, Journal of Porous Media, vol.13, issue.3, pp.221-234, 2010.
DOI : 10.1615/JPorMedia.v13.i3.30

M. E. Dexter and L. W. Bickle, Dexter building shell elements as passive solar collectors; Proceedings of conference on systems simulation and economic analysis for solar heating and cooling, pp.162-164, 1978.

D. En, Hygrothermal performance of building components and building elements -Assessment of moisture transfer by numerical simulation, 2007.

E. Djunaedy, External coupling between building energy simulation and computational fluid dynamics. Thesis (PhD), 2005.

M. Dowson, M. Grogan, T. Birks, D. Harrison, and C. S. , Streamlined life cycle assessment of transparent silica aerogel made by supercritical drying, Applied Energy, vol.97, pp.396-404
DOI : 10.1016/j.apenergy.2011.11.047

D. J. Beckman and W. A. , Solar engineering of thermal processes, 2006.

A. Ebrahimpour and M. Maerefat, Application of Advanced Glazing and Overhangs in Residential Buildings. Energy Conversion and Management), pp.212-219, 2011.

. Enerdata, Energy Efficiency Trends in Buildings in the EU: Lessons from the ODYSSEE MURE project, 2012.

E. Iso, Thermal bridges in building construction -Heat flows and surface temperatures -Detailed calculations, 2007.

P. A. Enkvist, T. Naucler, and J. Rosander, A cost curve for greenhouse gas reduction, 2007.

G. Evola, G. Margani, and L. Marletta, Energy and cost evaluation of thermal bridge correction in Mediterranean climate, Energy and Buildings, vol.43, issue.9, pp.2385-2393, 2011.
DOI : 10.1016/j.enbuild.2011.05.028

P. Fanger, Thermal comfort: analysis and applications in environmental Engineering. United States, 1970.

A. P. Gagge, A. P. Fobelets, and L. G. Berglund, A Standard Predictive Index of Human Response to the Thermal Environment, ASHRAE Trans, vol.92, 1986.

A. P. Gagge, J. A. Stolwijk, and Y. Nishi, An Effective Temperature Scale Based on a Simple Model of Human Physiological Regulatory Response, ASHRAE Trans, vol.70, 1970.

I. Gamez-royuela, Comparison of Energy Performance Rating of Dwellings in Malta Software (Eprdm) with Designbuilder: EnergyPlus Simulation Programme. Thesis: Bachelor of Industrial Engineering, 2011.

Y. Gao, J. J. Roux, L. H. Zhao, and Y. Jiang, Dynamical building simulation: A low order model for thermal bridges losses, Energy and Buildings, vol.40, issue.12, pp.2236-2243, 2008.
DOI : 10.1016/j.enbuild.2008.07.003

URL : https://hal.archives-ouvertes.fr/hal-00353388

B. Givoni, Passive and Low Energy Cooling of Buildings, 1994.

M. Gouda, S. Underwood, and . Dc, Low-order model for the simulation of a building and its heating Building Services Energy Research Technology, 2000.

M. Guizzardi, Hygrothermal Performance Assessment of Novel Interior Insulation Solutions

R. Henninger, M. Witte, and D. Crawley, Analytical and comparative testing of EnergyPlus using IEA HVAC BESTEST E100???E200 test suite, Energy and Buildings, vol.36, issue.8, pp.855-863, 2004.
DOI : 10.1016/j.enbuild.2004.01.025

J. L. Hensen, E. Djunaedy, M. Radoevi¢, and A. Yahiaoui, Performance simulation for better building design, Proceedings of 21st Conference on Passive and Low Energy Architecture, 2004.
DOI : 10.1016/j.enbuild.2004.06.004

K. G. Hollands, T. E. Unny, G. D. Raithby, and L. Konicek, Free Convective Heat Transfer Across Inclined Air Layers, Journal of Heat Transfer, vol.98, issue.2, p.189, 1976.
DOI : 10.1115/1.3450517

A. Holm and H. M. Künzel, Combined effect of tem-perature and humidity on the deterioration process of insulation materials in ETICS, Proceedings of the 5th Symposium on Building Physics in the Nordic Countries, pp.677-684, 1999.

A. S. Hopkins, A. Lekov, J. Lutz, G. Rosenquist, and L. Gu, Simulating a Nationally Representative Housing Sample Using EnergyPlus. LBNL-4420E, 2011.

L. Huang, Feasibility study of using silica aerogel as insulation for buildings, KTH School of Industrial Engineering and Management, 2012.

M. Humphreys and J. Nicol, The validity of ISO-PMV for predicting comfort votes in every-day thermal environments, Energy and Buildings, vol.34, issue.6, 2002.
DOI : 10.1016/S0378-7788(02)00018-X

M. Ibrahim, P. H. Biwole, E. Wurtz, and P. Achard, A study on the thermal performance of exterior walls covered with a recently patented silica-aerogel-based insulating coating, Building and Environment, vol.81, pp.112-122, 2014.
DOI : 10.1016/j.buildenv.2014.06.017

URL : https://hal.archives-ouvertes.fr/hal-01045072

M. Ibrahim, P. H. Biwole, E. Wurtz, and P. Achard, Limiting windows offset thermal bridge losses using a new insulating coating, Applied Energy, vol.123, pp.220-231, 2014.
DOI : 10.1016/j.apenergy.2014.02.043

URL : https://hal.archives-ouvertes.fr/hal-00968818

M. Ibrahim, N. Ghaddar, and K. Ghali, Optimal location and thickness of insulation layers for minimizing building energy consumption, Journal of Building Performance Simulation, vol.24, issue.6, pp.384-398, 2012.
DOI : 10.1016/S0378-7788(02)00071-3

M. Ibrahim, E. Wurtz, P. H. Biwole, P. Achard, and H. Sallee, Hygrothermal performance of exterior walls covered with aerogel-based insulating rendering, Energy and Buildings, vol.84, pp.241-251, 2014.
DOI : 10.1016/j.enbuild.2014.07.039

URL : https://hal.archives-ouvertes.fr/hal-01076592

M. Ibrahim, E. Wurtz, P. H. Biwole, and P. Achard, Transferring the south solar energy to the north facade through embedded water pipes, Energy, vol.78, 2014.
DOI : 10.1016/j.energy.2014.10.078

URL : https://hal.archives-ouvertes.fr/hal-01086909

K. I. Jensen, J. M. Schultz, and F. H. Kristiansen, Development of windows based on highly insulating aerogel glazings, Journal of Non-Crystalline Solids, vol.350, pp.351-357, 2004.
DOI : 10.1016/j.jnoncrysol.2004.06.047

X. Jin, X. Zhang, Y. Cao, and G. Wang, Thermal performance evaluation of the wall using heat flux time lag and decrement factor, Energy and Buildings, vol.47, pp.369-374, 2012.
DOI : 10.1016/j.enbuild.2011.12.010

P. Johansson, Assessment of the Risk for Mold Growth in a Wall Retrofitted with Vacuum Insulation Panels, Proceedings of the 9th Nordic Symposium on Building Physics, 2011.

P. Johansson, In situ Measurements of Facade Retrofitted with Vacuum Insulation Panels, Proceedings of the 10th International Vacuum Insulation Symposium, pp.15-16, 2011.

K. Johannes, F. Kuznik, F. Jay, P. Roquette, P. Achard et al., Elément d'enveloppe d'un bâtiment et ensemble comprenant un tel élément. French Patent application, pp.11-581, 2011.

M. Jokl and K. Kabele, The substitution of comfort PMV values by a new experimental operative temperature, Electronic proceedings of Clima, WellBeing Indoors, 2007.

T. Kalamees and J. Vinha, Hygrothermal calculations and laboratory tests on timber-framed wall structures, Building and Environment, vol.38, issue.5, pp.689-697, 2003.
DOI : 10.1016/S0360-1323(02)00207-X

Ö. Kaska and R. Yumrutas, Comparison of experimental and theoretical results for the transient heat flow through multilayer walls and flat roofs, Energy, vol.33, issue.12, pp.1816-1823, 2008.
DOI : 10.1016/j.energy.2008.07.016

Ö. Kaska and R. Yumrutas, Experimental investigation for total equivalent temperature difference (TETD) values of building walls and flat roofs, Energy Conversion and Management, vol.50, issue.11, pp.2818-2825, 2009.
DOI : 10.1016/j.enconman.2009.06.027

K. Zonen, C. , and C. Pyranometer, Retrieved from www, 2014.

M. Koebel, A. Rigacci, and P. Achard, Aerogel-based thermal superinsulation: an overview, Journal of Sol-Gel Science and Technology, vol.311, issue.2, pp.315-339, 2012.
DOI : 10.1007/s10971-012-2792-9

URL : https://hal.archives-ouvertes.fr/hal-00700709

D. I. Kolaitis, E. Malliotakis, D. A. Kontogeorgos, I. Mandilaras, D. I. Katsourinis et al., Comparative assessment of internal and external thermal insulation systems for energy efficient retrofitting of residential buildings, Energy and Buildings, vol.64, pp.123-131, 2013.
DOI : 10.1016/j.enbuild.2013.04.004

K. J. Kontoleon and D. K. Bikas, The effect of south wall's outdoor absorption coefficient on time lag, decrement factor and temperature variations, Energy and Buildings, vol.39, issue.9, pp.1011-1018, 2007.
DOI : 10.1016/j.enbuild.2006.11.006

K. J. Kontoleon and E. A. Eumorfopoulou, The influence of wall orientation and exterior surface solar absorptivity on time lag and decrement factor in the Greek region, Renewable Energy, vol.33, issue.7, pp.1652-1664, 2008.
DOI : 10.1016/j.renene.2007.09.008

K. J. Kontoleon and E. A. Eumorfopoulou, The influence of wall orientation and exterior surface solar absorptivity on time lag and decrement factor in the Greek region, Renewable Energy, vol.33, issue.7, pp.1652-1664, 2008.
DOI : 10.1016/j.renene.2007.09.008

J. Kosny and E. Kossecka, Multi-dimensional heat transfer through complex buildings envelope assemblies in hourly energy simulation programs, Energy and Buildings, pp.34445-54, 2002.

E. Kossecka and J. Kosny, Effect of insulation and mass distribution in exterior walls on dynamic thermal performance of whole buildings, Proceedings Thermal Performance of the Exterior Envelopes of Buildings, 1998.

E. Kossecka and J. Kosny, Influence of insulation configuration on heating and cooling loads in a continuously used building, Energy and Buildings, vol.34, issue.4, pp.321-331, 2002.
DOI : 10.1016/S0378-7788(01)00121-9

G. Krauss, Etude experimentale des transferts de chaleur entre un batiment et son environment: conception, realization, instrumentation d'une cellue test, 1985.

H. M. Kunzel, Simultaneous heat and moisture transport in building components, 1995.

H. M. Kunzel, K. Kießl, and M. Krus, Moisture in exposed building components, Proceedings of the international symposium on moisture problems in building wall, pp.258-266, 1995.

H. M. Künzel and K. Kießl, Drying of brick walls after impregnation, Internationale Zeitschrift für Bauin-standsetzen 2 H.2, S, pp.87-100, 1996.

T. Kusuda, Early history and future prospects of buildings system simulation, Proceeding of Building Simulation, 1999.

P. Mantha and L. B. Arena, A Systematic Approach to Hygrothermal Modeling and Compliance With Failure Criteria Using WUFI®, 5th National Conference of IBPSA-USA, 2012.

H. Manz, P. Loutzenhiser, T. Frank, P. A. Strachan, R. Bundi et al., Series of experiment for empirical validation of solar gain modeling in building energy codes ? experimental setup, test cell, characterization, specifications and uncertainty analyses, Building and Environment, pp.41-1784, 2006.

L. E. Mavromatidis, M. El-mankibi, P. Michel, and M. Santamouris, Numerical estimation of time lags and decrement factors for wall complexes including Multilayer Thermal Insulation, in two different climatic zones, Applied Energy, vol.92, pp.92-480, 2012.
DOI : 10.1016/j.apenergy.2011.10.007

W. Mcadams, Heat transmission, 1954.

H. Mechri, A. Capozzoli, and V. Corrado, USE of the ANOVA approach for sensitive building energy design, Applied Energy, vol.87, issue.10, pp.3073-83, 2010.
DOI : 10.1016/j.apenergy.2010.04.001

N. En, Thermal performance of building materials and products -Determination of thermal resistance by means of guarded hot plate and heat flow meter methods -Products of high and medium thermal resistance

J. K. Nayak, S. P. Sukhatme, R. G. Limaye, and S. V. Bopshetty, Performance studies on solar concrete collectors, Solar Energy, vol.42, issue.1, pp.45-56, 1989.
DOI : 10.1016/0038-092X(89)90129-1

N. En-iso-12572, Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination des propriétés de transmission de la vapeur d'eau NF EN ISO 8130-2. Poudres pour revêtement -Partie 2 : détermination de la masse volumique à l'aide d'un pycnomètre à gaz

N. En-iso-12571, Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination des propriétés de sorption hygroscopique

T. Nielsen, Simple tool to evaluate energy demand and indoor environment in the early stages of building design. Solar Energy, 2005.

M. Ozel and K. Pihtili, Optimum location and distribution of insulation layers on building walls with various orientations, Building and Environment, vol.42, issue.8, pp.3051-3059, 2007.
DOI : 10.1016/j.buildenv.2006.07.025

M. Ozel, The influence of exterior surface solar absortivity on thermal characteristics and optimum insulation thickness, Building and Environment, vol.39, pp.347-355, 2012.

M. Ozel, Thermal performance and optimum insulation thickness of building walls with different structure materials, Applied Thermal Engineering, vol.31, issue.17-18, pp.3854-3863, 2011.
DOI : 10.1016/j.applthermaleng.2011.07.033

G. Pajonk, E. Elalouie, R. Begag, M. Durant, B. Chevalier et al., Process for the preparation of monolithic silica aerogels. United States Patent, pp.5-795, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00617987

M. Reim, A. Beck, W. Korner, R. Petricevic, M. Glora et al., Highly insulating aerogel glazing for solar energy usage, Solar Energy, vol.72, issue.1, pp.21-29, 2002.
DOI : 10.1016/S0038-092X(01)00086-X

M. Reim, W. Korner, J. Manara, S. Korder, M. Arduini-schuster et al., Silica aerogel granulate material for thermal insulation and daylighting, Solar Energy, vol.79, issue.2, pp.79-131, 2005.
DOI : 10.1016/j.solener.2004.08.032

J. M. Roucoult, O. Douzane, and T. Langlet, Incorporation of thermal inertia in the aim of installing a natural nighttime ventilation system in buildings, Energy and Buildings, vol.29, issue.2, pp.129-133, 1999.
DOI : 10.1016/S0378-7788(98)00057-7

J. J. Roux, Proposition de modèles simplifiés pour l'étude du comportement thermique des bâtiments, 1984.

H. Sarak and A. Satman, The degree-day method to estimate the residential heating natural gas consumption in Turkey: a case study, Energy, vol.28, issue.9, 2003.
DOI : 10.1016/S0360-5442(03)00035-5

B. Shwarz, Heat and material transfer in outdoor wall surfaces. Thesis dissertation, University of Stuttgart, 1971.

N. Sisman, E. Kahya, N. Aras, and H. Aras, Determination of optimum insulation thicknesses of the external walls and roof (ceiling) for Turkey's different degree-day regions, Energy Policy, vol.35, issue.10, pp.35-5151, 2007.
DOI : 10.1016/j.enpol.2007.04.037

S. Dorcheh and A. , Silica aerogel: synthesis, properties and characterization, Journal of Materials Processing Technology, 2007.

A. Srivastava, S. Q. Hussain, B. N. Sharma, and G. N. Tiwari, Thermal performance of ground as an inexpensive solar collector and storage system. Energy Conversion and Management, pp.197-204, 1982.

S. Th, S. Brunner, M. Zimmermann, and K. Ghazi-wakili, Thermo-hygric properties of a newly developed aerogel based insulation rendering for both exterior and interior applications, Energy and Buildings, vol.44, pp.114-117, 2012.

J. Stoops, A possible connection between thermal comfort and health, paper LBNL 55134, 2004.

J. F. Straube and J. Smegal, Building America Special Research Project: High-R Walls Case Study Analysis, Building Science Corporation, 2009.

C. Sun, S. Shu, G. Ding, X. Zhang, and X. Hu, Investigation of time lags and decrement factors for different building outside temperatures, Energy and Buildings, vol.61, pp.61-62, 2013.
DOI : 10.1016/j.enbuild.2013.02.003

T. G. Theodosiou and A. M. Papadopoulos, The impact of thermal bridges on the energy demand of buildings with double brick wall constructions, Energy and Buildings, vol.40, issue.11, pp.2083-2089, 2008.
DOI : 10.1016/j.enbuild.2008.06.006

W. Tian and W. Zuo, Literature review and research needs to couple building energy and airflow simulation

M. Tr?ka, Co-simulation for Performance Prediction of Innovative Integrated Mechanical Energy Systems in Buildings. Thesis (PhD), 2008.

M. Tr?ka, J. L. Hensen, and M. Wetter, Co-simulation of innovative integrated HVAC systems in buildings, Journal of Building Performance Simulation, vol.112, issue.3, pp.209-230, 2009.
DOI : 10.1016/S0928-4869(00)00023-9

M. Tr?ka and J. Hensen, Model and tool requirements for co-simulation of building performance, Proceedings of Proceedings of the 15th IASTED Int. Conf. on Applied Simulation and Modelling, pp.26-28, 2006.

M. Tr?ka, M. Wetter, and J. Hensen, Comparison of co-simulation approaches for building and HVAC/R system simulation, Proceedings of the Building Simulation, pp.1418-1425, 2007.

L. Tronchin and K. Fabbri, A Round Robin Test for buildings energy performance in Italy, Energy and Buildings, vol.42, issue.10, pp.1862-1877, 2010.
DOI : 10.1016/j.enbuild.2010.05.022

P. T. Tsilingiris, Wall heat loss from intermittently conditioned spaces???The dynamic influence of structural and operational parameters, Energy and Buildings, vol.38, issue.8, pp.1022-1031, 2006.
DOI : 10.1016/j.enbuild.2005.11.012

K. Ulgen, Experimental and theoretical investigation of effects of wall???s thermophysical properties on time lag and decrement factor, Energy and Buildings, vol.34, issue.3, pp.273-278, 2002.
DOI : 10.1016/S0378-7788(01)00087-1

. Vaisala, Vaisala Hygrothermal sensor ; retrieved from http://www.vaisala.fr/fr, 2014.

G. Verbeeck and H. Hens, Energy savings in retrofitted dwellings: economically viable? Energy & Building, 2004.

M. M. Vijayalakshmi, E. Natarajan, and V. Shanmugasundaram, Thermal behavior of building wall elements, Journal of Applied Sciences, vol.6, pp.3128-3133, 2006.

G. N. Walton, Thermal Analysis Research Program Reference Manual. NBSSIR 83-2655, National Bureau of Standards, p.21, 1983.
DOI : 10.6028/nbs.ir.83-2655

Z. Wang, L. Yi, and F. Gao, Night ventilation control strategies in office buildings, Solar Energy, vol.83, issue.10, pp.1902-1915, 2009.
DOI : 10.1016/j.solener.2009.07.003

M. Wetter and P. Haves, A modular building controls virtual test bed for the integration of heterogeneous systems, Proceedings of SimBuild, 3rd National Conference: International Building Performance Simulation Association, 2008.

S. L. Wong, K. K. Wan, and T. N. Lam, Artificial neural networks for energy analysis of office buildings with daylighting, Applied Energy, vol.87, issue.2, pp.551-557, 2010.
DOI : 10.1016/j.apenergy.2009.06.028