.. Influence-des-paramètres-procédés-sur-la-qualité-d-'impression, 99 4.2.1. La vitesse d'impression, p.100

.. De-surface, La compressibilité, p.135

J. F. Agassant and M. Espy, Theoretical and experimental study of the molten polymer flow in the calender bank, Polymer Engineering and Science, vol.62, issue.2, pp.118-125, 1985.
DOI : 10.1002/pen.760250210

H. Benkreira and R. Patel, Direct gravure roll coating, Chemical Engineering Science, vol.48, issue.12, pp.2329-2335, 1993.
DOI : 10.1016/0009-2509(93)80248-O

H. Benkreira, R. Patel, M. F. Edwards, and W. L. Wilkinson, Classification and analyses of coating flows, Journal of Non-Newtonian Fluid Mechanics, vol.54, pp.437-447, 1994.
DOI : 10.1016/0377-0257(94)80035-9

Y. A. Bery, Mechanisms governing gravure printing, Tappi Coating Conf, pp.149-159, 1985.

D. W. Blasche, Methods of cylinder engraving for gravure printing, Tappi J, vol.76, pp.169-174, 1993.

M. F. Bohan, T. C. Claypole, and D. T. Gethin, The effect of process parameters on product quality of rotogravure printing, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.7, issue.3, pp.205-220, 2000.
DOI : 10.1243/0954405001517595

L. Boissonnet, Etude de l'impression par héliogravure, rapport de projet, 2007.

J. A. Bristow and H. Ekman, Paper properties affecting gravure print quality, Tappi J, vol.64, issue.10, pp.125-128, 1981.

O. H. Campanella and R. L. Cerro, Viscous flow on the outside of a horizontal rotating cylinder: The roll coating regime with a single fluid, Chemical Engineering Science, vol.39, issue.10, pp.1443-1449, 1984.
DOI : 10.1016/0009-2509(84)80002-0

C. Chevalier, Ecoulements élongationnels de solutions diluées de polymères, Thèse de Doctorat, 2009.

H. Chuang, C. Lee, and T. Liu, An experimental study on the pickout of scaled-up gravure cells, Intern. Polym, Proc. 23, pp.216-222, 2008.

E. Darque-ceretti and E. Felder, Adhésion et adhérance, 2003.

R. D. Deegan, O. Bakajin, T. F. Dupont, G. Huber, S. R. Nagel et al., Contact line deposits in an evaporating drop, Physical Review E, vol.62, issue.1, pp.756-765, 2000.
DOI : 10.1103/PhysRevE.62.756

T. Domenech, R. Zouari, E. Peuvrel-disdier, and B. Vergnes, Formation of fractal-like structure in organoclay based polypropylene nanocomposites, Macromol, pp.47-3417, 2014.

D. Eklund, Influence of blade geometry and blade pressure on the appearance of a coated surface, Coating Conference, pp.1-3, 1984.

S. Elsayad, F. Morsy, S. El-sherbiny, and E. Abou, Some factors affecting ink transfer in gravure printing, Pigment & Resin Technology, vol.31, issue.4, pp.31-234, 2002.
DOI : 10.1108/03699420210432429

M. Fenoll, Optimisation des paramètres d'impression pour l'électronique imprimée sur supports souples, Thèse de Doctorat de l'Institut National Polytechnique de Grenoble, 2007.

L. Flamand, Fatigue des surfaces, Techniques de l'ingénieur, pp.5055-2013

F. M. Fowkes, ATTRACTIVE FORCES AT INTERFACES, Industrial & Engineering Chemistry, vol.56, issue.12, p.40, 1964.
DOI : 10.1021/ie50660a008

F. M. Fowkes, F. L. Riddle-jr, W. E. Pastore, and A. A. Weber, Interfacial interactions between self-associated liquids and squalene used to rest equations for solid-liquid interfacial interactions, Colloids Surf, pp.43-367, 1990.

H. Hertz, Uber die Berührung fester elasticher Körper, J. Reine Angew. Math, vol.92, pp.1881-156

R. W. Hoyland and R. Field, A review of the transudation of water into paper -Part 4: Some principles of flow & their application to paper, Paper Tech. Int, vol.17, p.304, 1976.

H. Hu and R. G. Larson, Analysis of the Effects of Marangoni Stresses on the Microflow in an Evaporating Sessile Droplet, Langmuir, vol.21, issue.9, pp.3972-3980, 2005.
DOI : 10.1021/la0475270

H. Hu and R. G. Larson, Analysis of the Microfluid Flow in an Evaporating Sessile Droplet, Langmuir, vol.21, issue.9, pp.3963-3971, 2005.
DOI : 10.1021/la047528s

H. Hu and R. G. Larson, Evaporation of a Sessile Droplet on a Substrate, The Journal of Physical Chemistry B, vol.106, issue.6, pp.1334-1344, 2002.
DOI : 10.1021/jp0118322

W. Huang, S. Lee, H. J. Sung, T. Lee, and D. Kim, Simulation of liquid transfer between separating walls for modeling micro-gravure-offset printing, International Journal of Heat and Fluid Flow, vol.29, issue.5, pp.1436-1446, 2008.
DOI : 10.1016/j.ijheatfluidflow.2008.07.002

K. L. Johnson, Contacts Mechanics, 1985.

S. Kahila and D. Eklund, Factors influencing the coat weight in blade coating with bevelled blades, practice and theory, Tappi Conf, pp.13-29, 1978.

N. Kapur, A parametric study of direct gravure coating, Chemical Engineering Science, vol.58, issue.13, p.2875, 2003.
DOI : 10.1016/S0009-2509(03)00136-2

G. L. Kaza, Etude de l'impression par héliogravure, rapport de projet, 2006.

C. Kiparissides and J. Vlachopoulos, Finite element analysis of calendering, Polymer Engineering and Science, vol.18, issue.10, pp.712-719, 1976.
DOI : 10.1002/pen.760161010

H. Kipphan, Handbook of printing media, 2001.

J. Lee, K. Mun, and Y. Yoo, A comparative study on roll-to-roll gravure printing on PET and BOPP webs with aqueous ink, Progress in Organic Coatings, vol.64, issue.1, pp.98-108, 2009.
DOI : 10.1016/j.porgcoat.2008.07.011

S. Lee and N. Yang, Analysis on the ink transfer mechanism in R2R application, Journal of Mechanical Science and Technology, vol.39, issue.1
DOI : 10.1007/s12206-009-1146-1

T. Lee, S. Lee, and J. Noh, The effect of shear force on ink transfer in gravure offset printing, Paper No. 125026, 2010.
DOI : 10.1088/0960-1317/20/12/125026

C. Lee, S. Hu, T. Liu, and C. Tiu, Three-dimensional observation on the liquid emptying process from a scaled-up gravure cell, Intern. Polym, Proc. 27, pp.128-137, 2012.

R. Magnier, J. F. Agassant, and P. Bastin, Experiments and Modelling of Calender Processing for Shear Thinning Thermoplastics between Counter Rotating Rolls with Differential Velocities, International Polymer Processing, vol.28, issue.4
DOI : 10.3139/217.2794
URL : https://hal.archives-ouvertes.fr/hal-00856681

E. Mitsoulis, J. Vlachopoulos, and F. A. Mirza, Calendering analysis without the lubrication approximation, Polymer Engineering and Science, vol.21, issue.1, pp.6-18, 1985.
DOI : 10.1002/pen.760250103

J. F. Moulder, W. F. Stickle, P. E. Sobol, and K. D. Bomben, Handbook of X-Ray photoelectron spectroscopy, 1992.

D. K. Owens and R. C. Wendt, Estimation of the surface free energy of polymers, Journal of Applied Polymer Science, vol.13, issue.8
DOI : 10.1002/app.1969.070130815

B. Rivière, Optimisation du procédé de sérigraphie pour la réalisation de capteurs de gaz en couche épaisse, Thèse de Doctorat, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2004.

R. Salahetdin and E. Eklund, On the theory of blade coating, Spring Advanced Coating fundamental Symposium, 2003.

A. K. Sankaran and J. P. Rothstein, Effect of viscoelasticity on liquid transfer during gravure printing, Journal of Non-Newtonian Fluid Mechanics, vol.175, issue.176, pp.64-75, 2012.
DOI : 10.1016/j.jnnfm.2012.03.011

C. Sollogoub, Etude du procédé d'extrusion couchage de films polymères sur tôles d'acier, Thèse de Doctorat, 2003.

R. P. Spiers, C. V. Subbaraman, and W. L. Wilkinson, Free coating of a Newtonian liquid onto a vertical surface, Chemical Engineering Science, vol.29, issue.2, pp.389-396, 1974.
DOI : 10.1016/0009-2509(74)80048-5

M. Takase, R. Katsumuto, T. Kegasawa, S. Kihara, and K. Funatsu, Numerical analysis of polymer melt flow in the nipping region, Polymer Engineering & Science, vol.23, issue.4, pp.836-842, 2002.
DOI : 10.1002/pen.10995

A. Tay, Dynamique du mouillage et du séchage d'une goutte d'eau sur un film de polymère hydrosoluble, Thèse de Doctorat, 2009.

N. Triantafillopoulos and N. Altug, Experimental evaluation of the forces in bevelled blade coating, Coating Conf, Atlanta, pp.77-98, 1994.

. J. Wang and J. Evans, Drying behaviour of droplets of mixed powder suspensions, Journal of the European Ceramic Society, vol.26, issue.15
DOI : 10.1016/j.jeurceramsoc.2005.08.018

S. Wu, Polymer Interfaces and Adhesion, 1982.

X. Yin and S. Kumar, Flow visualization of the liquid emptying process in scaled-up gravure grooves and cells, Chemical Engineering Science, vol.61, issue.4, pp.1146-1156, 2006.
DOI : 10.1016/j.ces.2005.07.039

W. A. Zisman, Relation of the Equilibrium Contact Angle to Liquid and Solid Constitution
DOI : 10.1021/ba-1964-0043.ch001