D. J. Whitehouse, Surfaces ? a link between manufacture and function Arch, 1978.

C. Taylor, Automobile engine tribology???design considerations for efficiency and durability, Wear, vol.221, issue.1, pp.1-8, 1998.
DOI : 10.1016/S0043-1648(98)00253-1

D. V. Bhatt, M. A. Bulsara, and K. Mistry, Prediction of Oil Film Thickness in Piston Ring -Cylinder Assembly in an I C Engine : A Review II, pp.3-6, 2009.

K. J. Stout and T. A. Spedding, The characterization of internal combustion engine bores, Wear, vol.83, issue.2, pp.311-337, 1982.
DOI : 10.1016/0043-1648(82)90186-7

P. Pawlus, T. Cieslak, and T. Mathia, The study of cylinder liner plateau honing process, Journal of Materials Processing Technology, vol.209, issue.20, pp.6078-86, 2009.
DOI : 10.1016/j.jmatprotec.2009.04.025

J. Schmid, T. Hoen, and W. Stumpf, Less Wear and Oil Consumption through Helical Slide Honing of Engines by Deutz, pp.46-51, 2009.

D. Braun, C. Greiner, J. Schneider, and P. Gumbsch, Efficiency of laser surface texturing in the reduction of friction under mixed lubrication Tribol, Int, vol.77, pp.142-149, 2014.

U. Pettersson and S. Jacobson, Textured surfaces for improved lubrication at high pressure and low sliding speed of roller/piston in hydraulic motors Tribol, Int, vol.40, pp.355-364, 2007.

M. Suh, C. Y. Kim, S. Hinoki, T. Kohyama, and A. , Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction Tribiology Int, pp.1508-1525, 2010.

A. Bucht and . Ullrich, Using less gas and oil to get where you're going Fraunhofer, Res, pp.12-15

R. Reason, Progress in the appraisal of surface topography during the first half-century of instrument development, Wear, vol.57, issue.1, pp.1-16, 1979.
DOI : 10.1016/0043-1648(79)90135-2

K. J. Stout and E. Davis, Surface topography of cylinder bores -the relationship between manufacture, characterization and function Wear 95, pp.111-136, 1984.

N. En-iso-4287, Spécification géométrique des produits (GPS) -État de surface: Méthode du profil -Termes, définitions et paramètres d, 1998.

N. En and . Iso, Spécification géométrique des produits (GPS) -État de surface : Méthode du profil -Paramètres liés aux motifs [22] International Standard ISO 13565-2:1996 1998 Geometrical Product Specifications (GPS) ? Surface texture: Profile method; Surfaces having stratified functional properties ?Part 2 : Height characterization using the linear material ratio curve, CNOMO 2003 Fascicule de formation états de surface, 120851998.

X. Chen, J. Raja, and S. Simanapalli, Multi-scale analysis of engineering surfaces, International Journal of Machine Tools and Manufacture, vol.35, issue.2, pp.231-239, 1995.
DOI : 10.1016/0890-6955(94)P2377-R

L. Sabri, Développement et mise en oeuvre d'une méthodologie d'analyse multiéchelle du procédé de rodage en production de série, 2010.

S. Mezghani and I. Demirci, El Mansori M and Zahouani H 2013 Energy efficiency optimization of engine by frictional reduction of functional surfaces of cylinder ringpack system Tribol, Int, vol.59, pp.240-247

E. Tomanik, Friction and wear bench tests of different engine liner surface finishes Tribol, Int, vol.41, pp.1032-1040, 2008.

B. Rosen, C. Anderberg, P. Pawlus, and T. Thomas, Alternative descriptions of roughness for cylinder liner production, J. Mater. Process. Technol, vol.209, pp.1936-1978, 2009.

N. En and . Iso, Etat de surface : Surfacique ? Partie 6 : Classification des méthodes de mesurage de l'état de surface, 2010.

E. Decencière and D. Jeulin, Morphological decomposition of the surface topography of an internal combustion engine cylinder to characterize wear, Wear, vol.249, issue.5-6, pp.482-490, 2001.
DOI : 10.1016/S0043-1648(01)00579-8

J. Jocsak, The effect of surface finish on piston ring-pack performance in advanced reciprocating engine systems, 2005.

L. Ting, Development of a Reciprocating Test Rig for Tribological Studies of Piston Engine Moving Components - Part I: Rig Design and Piston Ring Friction Coefficients Measuring Method, SAE Technical Paper Series, pp.462-471, 1993.
DOI : 10.4271/930685

A. Robota and F. Zwein, Influence of cylinder bore topography on the oil consumption and particulate emissions of a DI TCI diesel engine MTZ, pp.4-11, 1999.

D. E. Richardson and G. Borman, Using Fiber Optics and Laser Fluorescence for Measuring Thin Oil Films with Application to Engines International Fuels and Lubricants Meeting and Exposition, pp.9123881-9123913, 1991.

N. W. Bolander, B. D. Steenwyk, A. Kumar, and . Sadeghi, Film thickness and friction measurement of piston ring cyliner liner contact with corresponding modeling including mixed lubrication Proceedings of the, Fall Technical Conference of the ASME Internal Combustion Engine Division pp, pp.811-832, 2004.

L. Mourier, D. Mazuyer, and F. Ninove, Lubrication mechanisms with laser-surface-textured surfaces in elastohydrodynamic regime, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.104, issue.8, pp.697-711
DOI : 10.1243/13506501JET771
URL : https://hal.archives-ouvertes.fr/hal-00663272

D. K. Srivastava, A. Agarwal, and J. Kumar, Effect of liner surface properties on wear and friction in a non-firing engine simulator, Materials & Design, vol.28, issue.5, pp.1632-1672, 2007.
DOI : 10.1016/j.matdes.2006.01.034

F. Ninove and D. Mazuyer, Contacts EHD micro-texturés en application du contact segment chemise 19ème Congrès Français de Mécanique, pp.1-6, 2009.

G. Knoll, H. Peeken, R. Lechtape-grüter, and L. J. , Computer-Aided Simulation of Piston and Piston Ring Dynamics, Journal of Engineering for Gas Turbines and Power, vol.118, issue.4, pp.880-886, 1996.
DOI : 10.1115/1.2817009

M. Priest, D. Dowson, and C. Taylor, Theoretical modelling of cavitation in piston ring lubrication, Theoretical modelling of cavitation in piston ring lubrication Proc. Inst, pp.435-481, 2000.
DOI : 10.1243/0954406001523092

N. Patir and H. Cheng, An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication Trans, ASME, vol.100, pp.12-19, 1978.

N. Patir and H. Cheng, Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces Trans, ASME, vol.101, pp.220-229, 1979.

A. Spencer, A. Almqvist, and R. Larsson, A numerical model to investigate the effect of honing angle on the hydrodynamic lubrication between a combustion engine piston ring and cylinder liner, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.225, issue.7, pp.683-692, 2011.
DOI : 10.1177/1350650111403867

A. Lubrecht and A. , The numerical solution of the elastohydrodynamically lubricated line and point contact problem, using multigrid techniques, 1987.

G. Buscaglia and M. Jai, Homogenization of the Generalized Reynolds Equation for Ultra-Thin Gas Films and Its Resolution by FEM, Journal of Tribology, vol.126, issue.3, p.547, 2004.
DOI : 10.1115/1.1739410

L. Felter and C. , Numerical simulation of piston ring lubrication Tribol, Int, vol.41, pp.914-923, 2008.

C. A. Caciu and E. Decencière, Numerical analysis of a 3D hydrodynamic contact, International Journal for Numerical Methods in Fluids, vol.168, issue.12, pp.1355-77, 2006.
DOI : 10.1002/fld.1164

C. Caciu, E. Decencière, and D. Jeulin, Parametric Optimization of Periodic Textured Surfaces for Friction Reduction in Combustion Engines Tribol. Trans, pp.51-533, 2008.

S. Mezghani, I. Demirci, H. Zahouani, E. Mansori, and M. , The effect of groove texture patterns on piston-ring pack friction Precis. Eng, pp.210-217, 2012.

M. B. Dobrica and M. Fillon, About the validity of Reynolds equation and inertia effects in textured sliders of infinite width, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.128, issue.1, pp.69-78, 2009.
DOI : 10.1243/13506501JET433

A. Spencer, A. Almqvist, and R. Larsson, A semi-deterministic texture-roughness model of the piston ring-cylinder liner contact, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.225, issue.6, pp.325-358, 2011.
DOI : 10.1177/1350650110396279

C. Minet, Lubrification mixte dans les étanchéités dynamiques: application aux garnitures mécaniques d'étanchéité, 2009.

M. Arghir, N. Roucou, M. Helene, and J. Frene, Theoretical Analysis of the Incompressible Laminar Flow in a Macro-Roughness Cell, Journal of Tribology, vol.125, issue.2, pp.309-327, 2003.
DOI : 10.1115/1.1506328

M. B. Dobrica, M. Fillon, M. D. Pascovici, and T. Cicone, Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.43, issue.8, pp.737-50, 2010.
DOI : 10.1243/13506501JET673

W. Habchi, A Full-system finite element approach to elastohydrodynamic lubrication problems, 2008.

R. Larsson, Modelling the effect of surface roughness on lubrication in all regimes Tribol, Int, vol.42, pp.512-518, 2009.

W. Tang, Y. Zhou, H. Zhu, and Y. H. , The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact, Applied Surface Science, vol.273, pp.199-204, 2013.
DOI : 10.1016/j.apsusc.2013.02.013

W. Tang, Y. Zhou, H. Zhu, and Y. , The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact, Applied Surface Science, vol.273, pp.199-204, 2013.
DOI : 10.1016/j.apsusc.2013.02.013

S. Wang, Y. Hu, W. W. , and W. , Effects of Surface Roughness on Sliding Friction in Lubricated-Point Contacts: Experimental and Numerical Studies, Journal of Tribology, vol.129, issue.4, pp.809-826, 2007.
DOI : 10.1115/1.2768081

H. L. Costa and I. Hutchings, Effects of die surface patterning on lubrication in strip drawing, Journal of Materials Processing Technology, vol.209, issue.3, pp.1175-80, 2009.
DOI : 10.1016/j.jmatprotec.2008.03.026

S. Yuan, W. Huang, and W. , Orientation effects of micro-grooves on sliding surfaces Tribol, Int, vol.44, pp.1047-54, 2011.

N. Brunetière and B. Tournerie, 2012 Numerical analysis of a surface-textured mechanical seal operating in mixed lubrication regime Tribol, Int, vol.49, pp.80-89

W. Huang, L. Jiang, C. Zhou, and X. Wang, The lubricant retaining effect of microdimples on the sliding surface of PDMS Tribol, Int, vol.52, pp.87-93, 2012.

M. D. Pascovici, T. Cicone, M. Fillon, and M. Dobrica, Analytical investigation of a partially textured parallel slider, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.50, issue.2, pp.151-159, 2009.
DOI : 10.1243/13506501JET470

A. Kovalchenko, O. Ajayi, A. Erdemir, and G. Fenske, Friction and wear behavior of laser textured surface under lubricated initial point contact, Wear, vol.271, issue.9-10, pp.1719-1744, 2011.
DOI : 10.1016/j.wear.2010.12.049

C. Ma and H. Zhu, An optimum design model for textured surface with ellipticalshape dimples under hydrodynamic lubrication Tribol, Int, vol.44, pp.987-95, 2011.

N. Tala-ighil, M. Fillon, and P. Maspeyrot, Effect of textured area on the performances of a hydrodynamic journal bearing, Tribology International, vol.44, issue.3, pp.211-220, 2011.
DOI : 10.1016/j.triboint.2010.10.003

X. Lu and M. Khonsari, An Experimental Investigation of Dimple Effect on the Stribeck Curve of Journal Bearings, Tribology Letters, vol.11, issue.4, pp.169-76, 2007.
DOI : 10.1007/s11249-007-9217-x

M. Wakuda, Y. Yamauchi, S. Kanzaki, and Y. Yasuda, Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact Wear, pp.356-63, 2003.

S. P. Mishra and A. A. Polycarpou, Tribological studies of unpolished laser surface textures under starved lubrication conditions for use in air-conditioning and refrigeration compressors Tribol, Int, vol.44, pp.1890-901, 2011.

T. Nanbu, N. Ren, Y. Yasuda, D. Zhu, and Q. Wang, Micro-Textures in Concentrated Conformal-Contact Lubrication: Effects of Texture Bottom Shape and Surface Relative Motion, Tribology Letters, vol.100, issue.3, pp.241-52, 2008.
DOI : 10.1007/s11249-008-9302-9

R. Jackson, A Scale Dependent Simulation of Liquid Lubricated Textured Surfaces, Journal of Tribology, vol.132, issue.2, pp.1-6, 2010.
DOI : 10.1115/1.4001105

P. L. Menezes and S. Kailas, On the effect of surface texture on friction and transfer layer formation???A study using Al and steel pair, Wear, vol.265, issue.11-12, pp.1655-69, 2008.
DOI : 10.1016/j.wear.2008.04.003

P. L. Menezes, S. V. Kailas, and M. Lovell, Friction and transfer layer formation in polymer???steel tribo-system: Role of surface texture and roughness parameters, Wear, vol.271, issue.9-10, pp.2213-2234, 2011.
DOI : 10.1016/j.wear.2010.12.047

N. Ren, T. Nanbu, Y. Yasuda, D. Zhu, and Q. Wang, Micro Textures in Concentrated-Conformal-Contact Lubrication: Effect of Distribution Patterns, Tribology Letters, vol.40, issue.1???2, pp.275-85, 2007.
DOI : 10.1007/s11249-007-9271-4

H. L. Costa and I. Hutchings, Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions Tribol, Int, vol.40, pp.1227-1265, 2007.

Q. J. Wang and D. Zhu, Virtual Texturing: Modeling the Performance of Lubricated Contacts of Engineered Surfaces, Journal of Tribology, vol.127, issue.4, pp.722-730, 2005.
DOI : 10.1115/1.2000273

D. Zhu, T. Nanbu, N. Ren, Y. Yasuda, and Q. Wang, Model-based virtual surface texturing for concentrated conformal-contact lubrication, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.131, issue.229, pp.1-12, 2010.
DOI : 10.1243/13506501JET739

I. K?upka, P. ?perka, M. Hartl, X. Jin, S. et al., Effect of real longitudinal surface roughness on lubrication film formation within line elastohydrodynamic contact Tribol, Int, vol.43, pp.2384-2393, 2010.

X. Wang, K. Kato, K. Adachi, and K. Aizawa, Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water Tribol, Int, vol.36, pp.189-97, 2003.

B. Goeldel, Etude et mise en oeuvre d'un moyen flexible pour le rodage de carter cylindre de moteur à combustion interne, 2013.
URL : https://hal.archives-ouvertes.fr/pastel-00910324

L. Álvarez, C. J. Luis, and P. , Analysis of the influence of chemical composition on the mechanical and metallurgical properties of engine cylinder blocks in grey cast iron, Journal of Materials Processing Technology, vol.153, issue.154, pp.153-154, 2004.
DOI : 10.1016/j.jmatprotec.2004.04.222

B. Goeldel, J. Voisin, and D. Dumur, El Mansori M and Frabolot M 2013 Flexible right sized honing technology for fast engine finishing CIRP Ann. -Manuf. Technol, pp.327-357

M. Yousfi, S. Mezghani, I. Demirci, E. Mansori, M. et al., Optimisation de l'efficacité energétique des moteurs par la réduction du frottement du tribo-système segment-piston-cylindre Tribologie: approches scientifiques et applications, pp.208-223, 2012.

B. Rosen, C. Anderberg, and R. Ohlsson, Parameter correlation study of cylinder liner roughness for production and quality control Proc, Inst. Mech. Eng. Part B J, 2008.

W. Grabon and P. Pawlus, Tribological characteristics of one-process and two-process cylinder liner honed surfaces under reciprocating sliding conditions Tribol, Int, vol.43, pp.1882-92, 2010.

M. Mansori, . El, S. Mezghani, L. Sabri, and H. Zahouani, On concept of process signature in analysis of multistage surface formation, Surface Engineering, vol.140, issue.3, pp.216-239, 2010.
DOI : 10.1016/j.triboint.2008.03.015

A. Bruzzone, J. S. Montanaro, A. Ferrando, and P. Lonardo, Wavelet analysis for surface characterisation: An experimental assessment CIRP Ann. -Manuf. Technol, pp.479-82, 2004.

M. Yousfi, S. Mezghani, I. Demirci, and E. Mansori, 2013 Study on the relevance of some of the description methods for plateau-honed surfaces Surf, Topogr. Metrol. Prop, vol.2, pp.140061-140068

P. Ehret, D. Dowson, and C. Taylor, On lubricant transport conditions in elastohydrodynamic conjuctions, On lubricant transport conditions in elastohydrodynamic conjunctions Proc. R. Soc. A Math, pp.763-87, 1998.
DOI : 10.1098/rspa.1998.0185

C. Roelands, Correlational Aspects of the Viscosity-temperature-pressure Relationship of Lubricating Oils, 1966.

C. H. Venner and G. Morales-espejel, Amplitude reduction of small-amplitude waviness in transient elastohydrodynamically lubricated line contacts Proc, 1999.

N. Ren, D. Zhu, W. W. Chen, Y. Liu, and Q. Wang, A Three-Dimensional Deterministic Model for Rough Surface Line-Contact EHL Problems, J. Tribol, vol.131, pp.115011-115020, 2009.

Y. Hu and D. Zhu, Full Numerical Solution to the Mixed Lubrication in Point Contacts Trans, ASME, vol.122, pp.1-9, 2000.

S. Mezghani, I. Demirci, M. Yousfi, and E. Mansori, 2013 Mutual influence of crosshatch angle and superficial roughness of honed surfaces on friction in ring-pack tribo-system Tribol. Int, pp.54-63

Y. Zhou, H. Zhu, W. Tang, C. Ma, and W. Zhang, Development of the theoretical model for the optimal design of surface texturing on cylinder liner Tribol, Int, vol.52, pp.1-6, 2012.

M. Yousfi, S. Mezghani, I. Demirci, M. Mansori, and . El, Mutual effect of groove size and anisotropy of cylinder liner honed textures on engine performances Adv, 2014.

H. Yu, X. Wang, and F. Zhou, Geometric Shape Effects of Surface Texture on the Generation of Hydrodynamic Pressure Between Conformal Contacting Surfaces Tribol, Lett, vol.37, pp.123-153, 2009.