K. Abrinia and A. Fazlirad, Three-dimensional analysis of shape rolling using a generalized upper bound approach . journal of materials processing technology, Bibliography, vol.209, pp.3264-3277, 2009.

J. M. Alexander, On the Theory of Rolling, Proc. R. Soc. Lond., A, pp.535-563, 1972.
DOI : 10.1098/rspa.1972.0025

J. M. Allwood, A hybrid 2.5 dimensional elastoviscoplastic model of hot strip rolling for practical applications, Simulation of Materials Proc: Theory, Methods and Appl, pp.519-525, 2001.

S. Andersson, A. Söderberg, and S. Björklund, Friction models for sliding dry, boundary and mixed lubricated contacts, Tribology International, vol.40, issue.4, pp.580-587, 2007.
DOI : 10.1016/j.triboint.2005.11.014

B. Avitzur, Maximum reduction in cold strip rolling, ARCHIVE: Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196), vol.174, issue.1960, pp.865-884, 1963.
DOI : 10.1243/PIME_PROC_1960_174_062_02

B. Avitzur, Power Analysis of Cold Strip Rolling, Journal of Engineering for Industry, vol.85, issue.1, pp.77-88, 1963.
DOI : 10.1115/1.3667599

B. Avitzur, An Upper-Bound Approach to Cold-Strip Rolling, Journal of Engineering for Industry, vol.86, issue.1, pp.31-48, 1964.
DOI : 10.1115/1.3670446

B. Avitzur, Metal Forming, 1968.
DOI : 10.1016/B0-12-227410-5/00425-7

B. Avitzur, Metal Froming: Application of Limit Analaysis, 1980.

B. Avitzur and W. Pachla, The Upper Bound Approach to Plane Strain Problems Using Linear and Rotational Velocity Fields???Part I: Basic Concepts, Journal of Engineering for Industry, vol.108, issue.4, pp.295-306, 1986.
DOI : 10.1115/1.3187080

B. Avitzur and W. Pachla, The Upper Bound Approach to Plane Strain Problems Using Linear and Rotational Velocity Fields???Part II: Applications, Journal of Engineering for Industry, vol.108, issue.4, pp.307-316, 1986.
DOI : 10.1115/1.3187081

B. Avitzur, S. Talbert, and W. Gordon, Analysis of Strip Rolling by the Upper Bound Approach, Journal of Engineering for Industry, vol.109, issue.4, pp.338-346, 1987.
DOI : 10.1115/1.3187137

M. J. Barata-marques and P. A. Martins, The use of dual-stream functions in the analysis of three-dimensional metal forming processes, International Journal of Mechanical Sciences, vol.33, issue.4, pp.313-323, 1991.
DOI : 10.1016/0020-7403(91)90043-3

J. G. Beese, Nomograms for predicting the spread of hot rolled slabs, AISE Yearly Preceddings, pp.251-252, 1972.

D. Bland and H. Ford, The calculation of roll force and torque in cold strip rolling with tensions, Proc. Instn, pp.144-153, 1948.
DOI : 10.1243/PIME_PROC_1948_159_015_02

D. Bland and H. Ford, Part iii -an approximate treatment of the elastic compression of the strip in cold rolling, J. Iron Steel Inst, vol.171, pp.245-249, 1952.

S. Bouharaoua, G. Deffrennes, L. Lampin, and M. Rivallain, A la recherche d'une modélisation simplifiée du laminage, 2006.

G. F. Bryant and R. Osborn, Derivation and assessment of roll force models. The iron and steel institute, p.245, 1973.

G. F. Bryant and R. Osborn, Derivation and assessment of simplified models for torque, slip and neutral angle. The iron and steel institute, p.279, 1973.

J. Campas, S. Terreaux, L. V. Des-roches, B. Bonvier, and D. Janczak, New online gage for edge drop measurement and effect of tapered work rolls, Iron and Steel Engineer, pp.27-32, 1995.

C. Camurri and S. Lavanchy, Application de la théorie des lignes de glissement au laminage à froid de tôle, Journal de Mécanique Théorique et Appliquée, vol.3, issue.5, pp.747-759, 1984.

C. Counhaye, Modélisation et contrôle industriel de la géométrie des aciers laminés à froid, 2000.

A. S. Chai, A modified Runge-Kutta method, SIMULATION, vol.10, issue.5, pp.221-233, 1968.
DOI : 10.1177/003754976801000503

J. Chenot, P. Montmitonnet, A. Bern, and C. Bertrand-corsini, A method for determining free surfaces in steady state finite element computations, Computer Methods in Applied Mechanics and Engineering, vol.92, issue.2, pp.245-260, 1991.
DOI : 10.1016/0045-7825(91)90242-X

M. S. Chun, J. J. Yi, and Y. H. Moon, Application of neural networks to predict the width variation in a plate mill, Journal of Materials Processing Technology, vol.111, issue.1-3, pp.146-149, 2001.
DOI : 10.1016/S0924-0136(01)00499-X

P. Cosse and M. Economopoulos, Mathematical study of cold rolling, C.N.R.M, vol.17, pp.15-32, 1968.

R. Courant, Differential and integral calculus, 1945.
DOI : 10.1002/9781118033241

M. Cozijnsen, A. Dixon, and W. Y. Yuen, Development of a shape model that includes edge spread for cold rolling Steel rolling, Steel rolling International conference, 2006.

A. Dixon and W. Y. Yuen, An analytical model for the lateral spread and shape defects from the rolling of a ridge profile or edge drop, 44th MWSP Conf. Proc, pp.267-278, 2002.

A. N. Dogruoglu, On constructing kinematically admissible velocity fields in cold sheet rolling, Journal of Materials Processing Technology, vol.110, issue.3, pp.287-299, 2001.
DOI : 10.1016/S0924-0136(00)00897-9

H. Dusser, J. L. Larrodera, and N. L. Francois, Improved cooling on cold tandem mills. Rolling conference - Paris, 2006.

W. J. Edwards, Width contraction in cold rolling. Metals Technology, p.86, 1975.

K. E. El-kalay and L. G. Sparling, Factors affecting friction and their effect upon load, torque and spread in hot flat rolling, JISI, vol.2, pp.152-163, 1968.

N. A. Fleck and K. L. Johnson, Towards a new theory of cold rolling thin foil, International Journal of Mechanical Sciences, vol.29, issue.7, pp.507-524, 1987.
DOI : 10.1016/0020-7403(87)90012-9

A. Fouratier, A. Lucas, J. H. Bianchi, P. Vescovo, F. Dionisi et al., Control of sheet surface defects and deep drawing in final strips production steps, 2007.

I. J. Freshwater, Simplified theories of flat rolling -i: The calculation of roll pressure, roll force and roll torque, Int. J. Mech. Sci, vol.38, issue.6, pp.633-648, 1996.

A. Hacquin, Modélisation thermomécanique 3D du laminage: couplage bande-cylindres (3D thermomechanical modelling of rolling processes strip-roll coupling), PhD Dissertation, 1996.

J. Hadamard, Sur les problèmes aux dérivées partielles et leur signification physique, Princeton University Bulletin, pp.49-52, 1902.

H. Hartung, F. W. Hollmann, and R. Holz, A new way to reduce the edge drop, Steel Research, vol.69, issue.4-5, pp.143-147, 1998.
DOI : 10.1002/srin.199801463

A. Helmi and J. M. Alexander, Geometrics factors affecting spread in hot flat rolling of steel, Journal of the Iron and Steel Institute, vol.206, pp.1110-1117, 1968.

R. Hill, A comparative study of some variational principles in the theory of plasticity, J. Appl. Mech, vol.17, pp.64-66, 1950.

R. Hill, The Mathematical theory of Plasticity, 1950.

J. H. Hitchcock, Roll neck bearings, A.S.M.E Report of Special Research Committee, 1935.

T. Hoang, Asymmetric rolling analysis -energy saving and ski effect, Ecole Nationale des Ponts et Chaussées, 2006.

Y. M. Hwang and H. H. Hsu, An investigation into the plastic deformation behavior at the roll gap during plate rolling, Journal of Materials Processing Technology, vol.88, issue.1-3, pp.97-104, 1999.
DOI : 10.1016/S0924-0136(98)00390-2

Z. Y. Jiang and A. K. Tieu, A 3-D finite element method analysis of cold rolling of thin strip with friction variation, Tribology International, vol.37, issue.2, pp.185-191, 2004.
DOI : 10.1016/S0301-679X(03)00049-5

K. L. Johnson and R. H. Bentall, The onset of yield in the cold rolling of thin strip, Journal of the Mechanics and Physics of Solids, vol.17, issue.4, p.253, 1969.
DOI : 10.1016/0022-5096(69)90015-5

W. Johnson and P. B. Mellor, Engineering Plasticity, 1973.

D. Jortner, J. F. Osterle, and C. F. Zorowski, An analysis of cold strip rolling, International Journal of Mechanical Sciences, vol.2, issue.3, pp.179-194, 1960.
DOI : 10.1016/0020-7403(60)90003-5

M. Kazeminezhad and A. K. Taheri, A theoretical and experimental investigation on wire flat rolling process using deformation pattern, Materials & Design, vol.26, issue.2, pp.99-103, 2005.
DOI : 10.1016/S0261-3069(04)00150-5

N. Kim, T. Altan, and S. Kobayashi, Three-dimensional analysis and computer simulation of shape rolling by the finite and slab element method, International Journal of Machine Tools and Manufacture, vol.31, issue.4, pp.553-563, 1991.
DOI : 10.1016/0890-6955(91)90036-3

S. Y. Kim and Y. T. Im, Three-dimensional finite element analysis of non-isothermal shape rolling, Journal of Materials Processing Technology, vol.127, issue.1, pp.57-63, 2002.
DOI : 10.1016/S0924-0136(02)00256-X

K. Kitamura, T. Nakanishi, I. Yarita, N. Suganuma, and K. Toyoshima, Edge-drop control of hot and cold rolled strip by tapered-crown roll shifting mill, Iron and Steel Engineer, pp.27-32, 1995.

M. Kiuchi and B. Avitzur, Limit Analysis of Flow Through Inclined Converging Planes, Journal of Engineering for Industry, vol.102, issue.2, pp.109-117, 1980.
DOI : 10.1115/1.3183841

K. Komori, Rigid-plastic finite-element method for analysis of three-dimensional rolling that requires small memory capacity, International Journal of Mechanical Sciences, vol.40, issue.5, pp.479-491, 1998.
DOI : 10.1016/S0020-7403(97)00060-X

K. Komori, An upper bound method for analysis of three-dimensional deformation in the flat rolling of bars, International Journal of Mechanical Sciences, vol.44, issue.1, pp.37-55, 2002.
DOI : 10.1016/S0020-7403(01)00086-8

D. Lafontaine, Première approche sur le rétreint au cours du laminage à froid, 2002.

G. D. Lahoti, S. N. Shah, and T. Altan, Computer-Aided Analysis of the Deformations and Temperatures in Strip Rolling, Journal of Engineering for Industry, vol.100, issue.2, pp.159-166, 1978.
DOI : 10.1115/1.3439404

A. C. Lau, R. Shivpuri, and P. C. Chou, An explicit time integration elastic-plastic finite element algorithm for analysis of high speed rolling, International Journal of Mechanical Sciences, vol.31, issue.7, pp.31483-497, 1989.
DOI : 10.1016/0020-7403(89)90098-2

H. C. Lee and S. Kobayashi, New Solutions to Rigid-Plastic Deformation Problems Using a Matrix Method, Journal of Engineering for Industry, vol.95, issue.3, pp.865-873, 1973.
DOI : 10.1115/1.3438238

N. Legrand, B. Becker, and C. Roubin, Towards a better width contral in cold rolling of flat steel strips, Steel rolling 2006 Congress, 2006.

N. Legrand and Q. T. Ngo, Rfcs rapport de l'etude sur la variation de largeur en usine à froid, 2011.

G. J. Li and S. Kobayashi, Rigid-Plastic Finite-Element Analysis of Plane Strain Rolling, Journal of Engineering for Industry, vol.104, issue.1, pp.55-64, 1982.
DOI : 10.1115/1.3185797

Y. H. Li, A. Randall, W. J. Lawrence, and C. A. Fryer, Roll force model for online application in hot strip rolling with varying friction conditions, Steel rolling 2006 Congress, 2006.

C. Liu, P. Hartley, C. E. Sturgess, and G. W. Rowe, Analysis of stress and strain distributions in slab rolling using an elastic-plastic finite-element method, International Journal for Numerical Methods in Engineering, vol.17, issue.1, pp.55-66, 1988.
DOI : 10.1002/nme.1620250107

H. M. Liu, J. Dan, and Y. R. Wang, Strip layer method for simulation of the 3d deformations of plate and strip rolling, Comm. Numer. Methods Engrg, vol.20, pp.183-191, 2004.

A. A. Markov, On variational principles in the theory of plasticity (russian), Prikladnaia Matematika i Mekhanika, vol.11, pp.339-350, 1947.

P. A. Martins and M. J. Barata-marques, Upper bound analysis of plane strain rolling using a flow function and the weighted residuals method, International Journal for Numerical Methods in Engineering, vol.31, issue.11, pp.1671-1683, 1999.
DOI : 10.1002/(SICI)1097-0207(19990420)44:11<1671::AID-NME559>3.0.CO;2-2

H. Matsumoto, Elastic-plastic theroy of cold and temper rolling. The Japan Society for Technology of Plasticity, p.565, 2007.

H. Matsumoto and T. Kawanami, Mechanism of material deformation related to shape and crown phenomena, Proc. 4 th Int. Steel Rolling Conf., Deauville, pp.1-12, 1987.

Y. Mitai and H. Iribe, Analysis of strip rolling by three-dimensionnal rigid plastic fem, pp.1-5, 1992.

P. Montmitonnet, Laminage -objectifs et modélisation, MC1(Ref. Number M 3 065):M 3065, 2002.

P. Montmitonnet, J. Chenot, C. Bertrand-corsini, C. David, T. Iung et al., A coupled thermomechanical approach for hot rolling bya 3d finite element method, Transactions of ASME Journal of Engineering for Industry, vol.114, pp.336-344, 1992.

K. Mori and K. Osakada, Simulation of three-dimensional deformation in rolling by the finite-element method, International Journal of Mechanical Sciences, vol.26, issue.9-10, pp.9-10515, 1984.
DOI : 10.1016/0020-7403(84)90005-5

K. Mori and K. Osakada, Finite element simulation of three-dimensional deformation in shape rolling, International Journal for Numerical Methods in Engineering, vol.10, issue.8, pp.1431-1440, 1990.
DOI : 10.1002/nme.1620300807

K. Mori and K. Osakada, Non-steady-state simulation of three-dimensional deformation around front and rear ends in shape rolling by the finite element method, Transactions of NAMRI/SME, vol.19, pp.9-14, 1991.

A. Nadai, The forces required for rolling steel strip under tension, Appl. Mech. ASME, 1939.

T. Oda, N. Satou, and T. Yabuta, Adaptive Technology for Thickness Control of Finisher Set-up on Hot Strip Mill., ISIJ International, vol.35, issue.1, pp.42-49, 1995.
DOI : 10.2355/isijinternational.35.42

S. I. Oh and S. Kobayashi, An approximate method for a three-dimensional analysis of rolling, International Journal of Mechanical Sciences, vol.17, issue.4, pp.293-305, 1975.
DOI : 10.1016/0020-7403(75)90010-7

T. Okamoto, H. Kimura, K. Nakagowa, and M. Ando, Measurement and estimation of mean flow stress and coefficient of friction in tandem mills, IFTAC 8th Trienial World Congress, pp.112-117, 1981.

A. Orban, D. Steinier, and C. Counhaye, Shape control in cold rolling, Proc. 6th Int. Rolling Conf. (METEC), pp.257-265, 1994.

E. Orowan, The calculation of roll pressure in hot and cold flat rolling, ARCHIVE: Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196), vol.150, issue.1943, pp.146-167, 1943.
DOI : 10.1243/PIME_PROC_1943_150_025_02

J. Z. Pan, W. Pachla, S. Rossenbery, and B. Avitzur, The Study of Distorted Grid Patterns for Flow-Through Conical Converging Dies by the Multi-triangular Velocity Field, Journal of Engineering for Industry, vol.106, issue.2, pp.150-160, 1984.
DOI : 10.1115/1.3185926

M. J. Peretic, J. Seidel, and S. Kraemer, Coordinated application of roll gap lubrication, work roll cooling and antipeeling systems in hot rolling mills, Iron and Steel Technology, pp.27-36, 2004.

V. Piispanen, Plastic deformation of metal: Theory of simulated sliding, Wear, vol.38, issue.1, pp.43-72, 1976.
DOI : 10.1016/0043-1648(76)90198-8

D. Pirus, Modèle d'élargissement d'une bande laminée en emprise sous traction dans une cage de train finisseur par la méthode borne superieure, 1992.

W. Prager and P. G. Hodge-jr, Theory of perfectly plastic solids, 1951.

Z. Quan, Deformation characteristics of the cross shear cold rolling (cscr) of ultra thin strip and the theory of the "elastic plug, Proc. Adv. Technol. Plastic, p.1173, 1984.

A. B. Richelsen and V. Tvergaard, 3D Analysis of cold rolling using a constitutive model for interface friction, International Journal of Mechanical Sciences, vol.46, issue.5, pp.653-671, 2004.
DOI : 10.1016/j.ijmecsci.2004.05.013

M. A. Sadowsky, A principle of maximum plastic resistance, J. Appl. Mech, vol.10, pp.65-68, 1943.

Y. Saito, Y. Kusumoto, T. Hattori, and K. Kato, Deformation analysis in shape rolling using an upper bound method, Journal of Advanced Technology of Plasticity, vol.11, pp.1190-1199, 1984.

R. Schrodter, Roll lubrication trials at Eko Stahl's hot strip mill, Revue de M??tallurgie, vol.98, issue.11, pp.1033-1044, 2001.
DOI : 10.1051/metal:2001144

R. Schwarz and D. Vallet, ??tude de la variation de largeur au tandem 4 cages de Sollac Biache, Revue de M??tallurgie, vol.93, issue.1, pp.83-87
DOI : 10.1051/metal/199693010083

S. Serek, B. Aksakal, and Y. Can, Analysis of cold and hot plate rolling using dual stream functions, Materials and Design, vol.29, pp.584-596, 2008.

E. Siebel, Die formgebung in bildsame zu-stande (forming in plastic stage), p.91, 1932.

R. B. Sims, The calculation of roll force and torque in hot rolling mills, ARCHIVE: Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196), vol.168, issue.1954, pp.191-200, 1954.
DOI : 10.1243/PIME_PROC_1954_168_023_02

L. G. Sparling, Formula for ???spread??? in hot flat rolling, Proc. Instn. Mech. Engrs, pp.17-18, 1961.
DOI : 10.1243/PIME_PROC_1961_175_043_02

D. Steiner, Optimization of work roll lubrication at the hot strip mill, Revue de M??tallurgie, vol.98, issue.11, pp.1046-1053, 2001.
DOI : 10.1051/metal:2001145

A. Stephany, Contribution à l'étude numérique de la lubrification en régime mixte en laminage à froid, 2006.

R. Stribeck, Die wesentlichen eigenshaften der gleit-und rollenlager. Z Ver Dtsch Zucker-Ind, 1902.

S. Timoshenko and J. N. Goodier, Theory of Elasticity, 1951.

Y. Tozawa, T. Ishikawa, and N. Iwata, Predicting the profile of rolled strip, Steel Rolling Conference, pp.787-796, 1982.

A. I. Tselikov, Effect of external friction and tension on the pressure of the metal on the roll in rolling, 1939.

R. Venter, Modelling of the rolling process???I, International Journal of Mechanical Sciences, vol.22, issue.2, pp.83-92, 1980.
DOI : 10.1016/0020-7403(80)90044-2

R. Venter and A. Abd-rabbo, Modelling of the rolling process???II, International Journal of Mechanical Sciences, vol.22, issue.2, pp.93-98, 1980.
DOI : 10.1016/0020-7403(80)90045-4

T. V. Karman, Beitrag zur theorie des walzvorgangesbeitrag zur theorie des walzvorganges. Zeitschrift für angewandte mathematik und mechanik, pp.139-141, 1925.

J. Wanga, W. Kaoa, H. Leea, and J. Wang, Analysis of 3D rolling forming with generalized rigid-plastic boundaries approach, Journal of Materials Processing Technology, vol.204, issue.1-3, pp.425-433, 2008.
DOI : 10.1016/j.jmatprotec.2007.11.102

S. W. Xiong, J. M. Rodrigues, and P. A. Martins, Application of the element free Galerkin method to the simulation of plane strain rolling, European Journal of Mechanics - A/Solids, vol.23, issue.1, pp.77-93, 2004.
DOI : 10.1016/j.euromechsol.2003.10.002

C. S. Yih, Stream functions in three dimensional flows, p.445, 1957.