A. Rp-7g-, Recommended Practice for Inspection and Classification of Used Drill Stem Elements, 2009.

A. Rp-7g, Recommended Practice for Drill Stem Design and Operation Limits, b, 1998.

A. Spec and 5. , Specification for Drill Pipe, c, 2001.

A. E647, Test Method for Measurement of Fatigue Crack Growth Rates

. Fkm-guideline, Analytical strength assessment of components in mechanical engineering, Forschungskuratorium Maschinenbau, 2003.

W. S. Bachman, Fatigue testing and development of drill pipe-to-tool joint connections, World Oil, vol.132, pp.104-116, 1951.

A. Baryshnikov, S. Poli, F. Stewart, and P. Ferrara, Downhole Tool Serviceability Under Dynamic Loads, SPE/IADC Drilling Conference, 1997.
DOI : 10.2118/37647-MS

A. Belaïd, Modélisation tridimensionnelle du comportement mécanique de la garniture de forage dans les puits a trajectoires complexes, Thèse de doctorat, 2005.

L. Bertini, M. Beghini, C. Santus, and A. Baryshnikov, Resonant test rigs for fatigue full scale testing of oil drill string connections, International Journal of Fatigue, vol.30, issue.6, pp.978-988, 2008.
DOI : 10.1016/j.ijfatigue.2007.08.013

F. C. Campbell, Fatigue and Fracture : Understanding the Basics

A. Carpinteri and R. Brighenti, Circumferential surface flaws in pipes under cyclic axial loading, Engineering Fracture Mechanics, vol.60, issue.4, pp.383-396, 1998.
DOI : 10.1016/S0013-7944(98)00036-8

A. Carpinteri and R. Brighenti, A three-parameter model for fatigue behaviour of circumferential surface flaws in pipes, International Journal of Mechanical Sciences, vol.42, issue.7, pp.1255-1269, 2000.
DOI : 10.1016/S0020-7403(99)00083-1

A. Carpinteri and R. Brighenti, Part-through cracks in pipes under cyclic bending, Nuclear Engineering and Design, vol.185, issue.1, pp.1-10, 1998.
DOI : 10.1016/S0029-5493(98)00189-7

A. Carpinteri, R. Brighenti, and A. Spagnoli, Fatigue growth simulation of part-through flaws in thick-walled pipes under rotary bending, International Journal of Fatigue, vol.22, issue.1, pp.1-9, 2000.
DOI : 10.1016/S0142-1123(99)00115-2

E. Castillo, Fernández-Canteli : A Unified Statistical Methodology for Modeling Fatigue Damage, 2009.

R. B. Chandler, M. J. Jellison, M. L. Payne, and J. S. Shepard, Advanced and emerging drillstring technologies overcome operational challenges, World Oil, pp.23-34, 2006.

N. H. Dao and H. Sellami, Stress intensity factors and fatigue growth of a surface crack in a drill pipe during rotary drilling operation, Engineering Fracture Mechanics, vol.96, issue.0, pp.626-640, 2012.
DOI : 10.1016/j.engfracmech.2012.09.025
URL : https://hal.archives-ouvertes.fr/hal-00773612

S. Degallaix and I. Bernhard, Traité des Matériaux : Tome 2, Caractérisation expérimentale des matériaux : propriétés physiques, thermiques et mécaniques. PPUR presses polytechniques, fév, 2007.

P. Destuynder, M. Djaoua, and S. Lescure, Quelques remarques sur la mécanique de la rupture élastique, Journal de Mécanique Théorique et Appliqué, vol.2, pp.113-135, 1983.

P. Destuynder, P. E. Djaoua, L. Chesnay, and J. C. , Sur une Interpr??tation Math??matique de l'Int??grale de Rice en Th??orie de la Rupture Fragile, Mathematical Methods in the Applied Sciences, vol.III, issue.1, pp.70-87, 1981.
DOI : 10.1002/mma.1670030106

T. J. Dolan, F. E. Richart, and C. E. , Work : The influence of fluctuations in stress amplitude on the fatigue of metals, ASTM Proceedings, 1949.

R. J. Donahue, H. M. Clark, P. Atanmo, R. Kumble, and A. J. , Crack opening displacement and the rate of fatigue crack growth, International Journal of Fracture Mechanics, vol.11, issue.2, pp.209-219, 1972.
DOI : 10.1007/BF00703882

N. E. Dowling, Estimation and correlation of fatigue lives for random loading, International Journal of Fatigue, vol.10, issue.3, pp.179-185, 1988.
DOI : 10.1016/0142-1123(88)90060-6

D. Duprat, Fatigue et mécanique de la rupture des pièces en alliage léger, 1997.

W. Elber, Fatigue crack closure under cyclic tension, Engineering Fracture Mechanics, vol.2, issue.1, pp.37-45, 1970.

R. G. Forman, V. E. Kearney, and R. M. Engle, Numerical Analysis of Crack Propagation in Cyclic-Loaded Structures, Journal of Basic Engineering, vol.89, issue.3, pp.459-464, 1967.
DOI : 10.1115/1.3609637

R. G. Forman and S. R. Mettu, Behavior of surface and corner cracks subjected to tensile and bending loads in ti-6Al-4V alloy. ASTM STP 1131, pp.519-546, 1992.

A. M. Freudenthal and R. A. Heller, On Stress Interaction in Fatigue and a Cumulative Damage Rule, Journal of the Aerospace Sciences, vol.26, issue.7, pp.58-69, 1958.
DOI : 10.2514/8.8131

A. Gfrerrer and G. P. Glaser, A New Approach for Most Realistic Wellpath Computation, IADC/SPE Asia Pacific Drilling Technology, 2000.
DOI : 10.2118/62726-MS

A. A. Griffith, The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, issue.582-593, pp.163-198, 1920.
DOI : 10.1098/rsta.1921.0006

G. Y. Grondin and G. L. Kulak, Evaluation of API Guidelines for Fatigue of Drillpipe, Proceedings of Oil and Gas Economics, Finance and Management Conference, 1991.
DOI : 10.2118/24225-MS

G. Y. Grondin and G. L. , Kulak : Fatigue of drill pipe, Structural Engineering Report Canada, vol.171, 1991.

G. Y. Grondin and G. L. Kulak, Fatigue Testing of Drillpipe, SPE Drilling & Completion, vol.9, issue.02, pp.95-102, 1994.
DOI : 10.2118/24224-PA

H. J. Grover, Cumulative damage theories, Wright Air Development Center Symposium on Fatigue of Aircraft Structures, pp.207-225, 1959.

H. J. Grover, An Observation Concerning the Cycle Ratio in Cumulative Damage, Symposium on Fatigue of Aircraft Structures ASTM STP274-EB, pp.120-124, 1960.
DOI : 10.1520/STP45928S

E. Haibach, Modifizierte lineare schadensakkumukations-hypothese zur berücksichtigung des dauerfestigkeitsabfalls mit fortschreitender schädigung (Modified linear damage accumulation hypothesis accounting for a decreasing fatigue strength during increasing fatigue damage), 1970.

E. Haibach, The influence of cyclic material properties on fatigue life prediction by amplitude transformation, International Journal of Fatigue, vol.1, issue.1, pp.7-16, 1979.
DOI : 10.1016/0142-1123(79)90039-2

J. E. Hansford and A. Lubinski, Cumulative Fatigue Damage of Drill Pipe in Dog-Legs, Journal of Petroleum Technology, vol.18, issue.03, pp.359-363, 1966.
DOI : 10.2118/1258-PA

J. E. Hansford and A. Lubinski, Effects of Drilling Vessel Pitch or Roll on Kelly and Drill Pipe Fatigue, Journal of Petroleum Technology, vol.16, issue.01, pp.77-86, 1964.
DOI : 10.2118/696-PA

R. Helbig and G. H. Vogt, Reversed bending fatigue strength of drill strings subject to the attack of drilling fluids. Oil and Gas European Magazine, pp.16-20, 1987.

T. H. Hill, P. V. Seshadri, and K. S. Durham, A Unified Approach to Drillstem-Failure Prevention (includes associated papers 26205 and 26213 ), SPE Drilling Engineering, vol.7, issue.04, pp.254-260, 1992.
DOI : 10.2118/22002-PA

B. M. Hillberry, Fatigue life of 2024-t3 aluminum alloy under narrow-and broadband random loading, Effects of Environment and Complex Load History on Fatigue Life, pp.462-167

H. Ho, An Improved Modeling Program for Computing the Torque and Drag in Directional and Deep Wells, SPE Annual Technical Conference and Exhibition, pp.2-5, 1988.
DOI : 10.2118/18047-MS

J. H. Horbeek, W. Birch, M. J. Mcmahon, and K. Fearnley, Successful Reduction of North Sea Drillstring Failures, Offshore Europe, 1995.
DOI : 10.2118/30348-MS

J. A. Howard, M. E. Halbert, and A. Lubinski, Systematic Tracking of Fatigue and Crack Growth To Optimize Drillstring Reliability, SPE/IADC Drilling Conference, pp.22-25, 1993.
DOI : 10.2118/25775-MS

R. Iain, C. Minh, H. Andy, W. Miriam, and S. Brian, Neil : Field data supports the use of stiffness and tortuosity in solving complex well design problems, Society of Petroleum Engineers, 1999.

G. R. Irwin, Onset of fast crack propagation in high strength steel and aluminum alloys, Sagamore Research Conference Proceedings, pp.289-305, 1956.

G. R. Irwin, Analysis of stresses and strains near the end of a crack traversing a plate, Journal of Applied Mechanics, vol.24, pp.361-364, 1957.

C. A. Johancsik, D. B. Friesen, and R. Dawson, Torque and Drag in Directional Wells-Prediction and Measurement, Journal of Petroleum Technology, vol.36, issue.06, pp.987-992, 1984.
DOI : 10.2118/11380-PA

M. W. Joosten, R. A. Ferguson, and J. Shute, New study shows how to predict accumulated drill pipe fatigue, World Oil (United States), vol.201, issue.5, pp.65-69, 1985.

L. M. Kachanov, Introduction to Continuum Damage Mechanics, 1986.
DOI : 10.1115/1.3173053

L. Kaechele, Review and analysis of cumulative-fatigue-damage theories. Memorandum RM-3650-PR, 1963.

M. Kaminski, P. Kanouté, F. Gallerneau, J. Chaboche, and S. Kruch, Analysis of a non linear cumulative fatigue damage model under complex hcf loading for car application, 9th International Conference on Structural Safety and Reliability - ICOSSAR2005, 2005.

M. Klesnil and P. Lukas, Influence of strength and stress history on growth and stabilisation of fatigue cracks, Engineering Fracture Mechanics, vol.4, issue.1, pp.77-92, 1972.
DOI : 10.1016/0013-7944(72)90078-1

B. F. Langer, Fatigue failure from stress cycles of varying amplitude, Journal of Applied Mechanics, vol.59, pp.160-162, 1937.

Y. Lee, J. Pan, R. Hathaway, and M. , Barkey : Fatigue Testing and Analysis : Theory and Practice, 2004.

Z. Li, X. Liu, D. Zhuo, and S. Zhang, A steady tension-torque model for drillstring in horizontal wells, 1993.

X. B. Lin and R. A. Smith, Fatigue Growth Prediction of Internal Surface Cracks in Pressure Vessels, Journal of Pressure Vessel Technology, vol.120, issue.1, pp.17-23, 1998.
DOI : 10.1115/1.2841878

A. Lubinski, Maximum Permissible Dog-Legs in Rotary Boreholes, Journal of Petroleum Technology, vol.13, issue.02, pp.175-194, 1961.
DOI : 10.2118/1543-G-PA

A. Lubinski, Fatigue of Range 3 Drill Pipe, Revue de l'Institut Fran??ais du P??trole, vol.32, issue.2, pp.209-232, 1977.
DOI : 10.2516/ogst:1977012

W. C. Lyons and G. J. Plisga, Standard handbook of petroleum & natural gas engineering, 2005.

K. A. Macdonald and J. V. Bjune, Failure analysis of drillstrings, ISSN 1350-6307. Papers presented at the Second International Conference on Engineering Failure Analysis, pp.1641-1666, 2006.
DOI : 10.1016/j.engfailanal.2006.11.073

S. J. Maddox, Fatigue Strength of Welded Structures, 1991.

S. S. Manson, J. C. Freche, and C. R. Ensign, Application of a double linear damage rule to cumulative fatigue. Rap. tech. NASA TN D-3839, National Aeronautics and Space Administration, 1967.

S. M. Marco and W. L. Starkey, A concept of fatigue damage, ASME Transactions, pp.627-632, 1954.

S. Menand, H. Sellami, M. Tijani, O. Stab, D. Dupuis et al., Advancements in 3D Drillstring mechanics: From the Bit to the Topdrive, IADC/SPE Drilling Conference, pp.21-23, 2006.
DOI : 10.2118/98965-MS
URL : https://hal.archives-ouvertes.fr/hal-00650257

M. H. Miller, K. J. Et, and E. R. De-los-rios, Fatigue damage accumulation above and below the fatigue limit, Symposium on The Behavior of Short Fatigue Cracks, pp.491-512, 1986.

M. A. Miner, Cumulative damage in fatigue, Journal of Applied Mechanics Transactions of ASME, vol.12, issue.67, pp.159-164, 1945.

S. Moradi and K. Ranjbar, Experimental and computational failure analysis of drillstrings, Engineering Failure Analysis, vol.16, issue.3, pp.923-933, 2009.
DOI : 10.1016/j.engfailanal.2008.08.019

R. P. Morgan and M. J. , Roblin : A method for the investigation of fatigue strength in seamless drillpipe, ASME Conference, 1969.

K. Ngargueudedjim, Contribution à l'étude des lois d'endommagement en fatigue, Thèse de doctorat, L'Institut National des Sciences Appliquées de Lyon, 2003.

J. Nguyen, Techniques d'exploitation pétrolièe. Le forage. Editions Technip, jan, 1993.

P. Paris, A Critical Analysis of Crack Propagation Laws, Journal of Basic Engineering, vol.85, issue.4, pp.528-533, 1963.
DOI : 10.1115/1.3656900

P. R. Paslay and E. P. Cernocky, Bending Stress Magnification in Constant Curvature Doglegs With Impact on Drillstring and Casing, SPE Annual Technical Conference and Exhibition, pp.6-9, 1991.
DOI : 10.2118/22547-MS

S. K. Putatunda, Influence of material strength level on fatigue crack closure, Engineering Fracture Mechanics, vol.30, issue.5, pp.627-639, 1988.
DOI : 10.1016/0013-7944(88)90155-5

Y. N. Rabotnov and G. Backhaus, Creep problems in structural members (northholland series in applied mathematics and mechanics), ZAMM Journal of Applied Mathematics and Mechanics, vol.51, issue.7, pp.575-576, 1971.

U. Sathuvalli, M. Payne, P. Pattillo, and R. Livesay, Advanced Assessment of Drillpipe Fatigue and Application to Critical Well Engineering, SPE/IADC Drilling Conference, pp.23-25, 2005.
DOI : 10.2118/92591-MS

J. M. Savignat, Well trajectory reconstruction : Field case study. Rapport interne, Mines ParisTech, 2000.

J. M. Savignat and M. Tijani, Construction géométrique de la trajectoire d'un puits de forage -Quelques éléments de réflexions, 1999.

A. R. Shahani and S. E. Habibi, Stress intensity factors in a hollow cylinder containing a circumferential semi-elliptical crack subjected to combined loading, International Journal of Fatigue, vol.29, issue.1, pp.128-140, 2007.
DOI : 10.1016/j.ijfatigue.2006.01.017

M. Sheppard, C. Wick, and T. Burgess, Designing Well Paths To Reduce Drag and Torque, déc, 1987.
DOI : 10.2118/15463-PA

R. I. Stephens, A. Fatemi, and R. R. Stephens, Metal Fatigue in Engineering, 1980.

S. Suresh, G. F. Zamiski, and D. R. Ritchie, Oxide-Induced Crack Closure: An Explanation for Near-Threshold Corrosion Fatigue Crack Growth Behavior, Metallurgical Transactions A, vol.97, issue.8, pp.1435-1443, 1981.
DOI : 10.1007/BF02643688

T. Tanaka and T. Fujii, Studies on fatigue damage caused by stresses below the endurance limit (probability distributions of crack initiation lives at stresses near the endurance limit). Memoirs of the Research Institute of Science & Engineering, p.91, 1977.

J. Tang and J. T. Yao, Random fatigue : A literature review, Rap. tech., Bureau of Engineering Research, 1970.

Y. Tsukano, S. Nishi, H. Miyoshi, and Y. Sogo, Appropriate Design of Drillpipe Internal Upset Geometry Focusing on Fatigue Property, SPE/IADC Drilling Conference, 1988.
DOI : 10.2118/17206-MS

Y. Tsukano, S. Nishi, S. Nishida, and M. , Improvement of Drill-Collar Fatigue Property by Last-Engaged -Thread Height Reduction of Pin, SPE Drilling Engineering, vol.5, issue.04, pp.325-330, 1990.
DOI : 10.2118/18704-PA

P. Verpeaux, T. Charras, and A. Millard, Castem 2000 : une approche moderne du calcul des structures. Calcul des structures et intelligence artificielle, pp.261-271, 1988.

K. Walker, The Effect of Stress Ratio During Crack Propagation and Fatigue for 2024-T3 and 7075-T6 Aluminum, Environment and Complex Load History on Fatigue Life, vol.462, pp.1-14, 1970.
DOI : 10.1520/STP32032S

N. Walker and C. J. , A FATIGUE CRACK CLOSURE MECHANISM IN TITANIUM, Fatigue & Fracture of Engineering Materials and Structures, vol.5, issue.1, pp.135-148, 1979.
DOI : 10.1016/0013-7944(72)90074-4

R. P. Wei, Fracture Mechanics Approach to Fatigue Analysis in Design, Journal of Engineering Materials and Technology, vol.100, issue.2, pp.113-120, 1978.
DOI : 10.1115/1.3443458

H. M. Westergaard, Bearing pressures and cracks, Journal of Applied Mechanics, vol.6, pp.49-53, 1939.

J. Wu, Drill-pipe bending and fatigue in rotary drilling of horizontal wells Society of Petroleum Engineers, oct, ISBN 9781555634209. (SPE Paper 37353) SPE Eastern Regional Meeting, pp.23-25, 1996.

X. B. Lin and R. A. Smith, Fatigue Growth Prediction of Internal Surface Cracks in Pressure Vessels, Journal of Pressure Vessel Technology, vol.120, issue.1, pp.17-23, 1998.
DOI : 10.1115/1.2841878

A. Carpinteri, R. Brighenti, and A. Spagnoli, Part-through cracks in pipes under cyclic bending, Nuclear Engineering and Design, vol.185, issue.1, pp.1-10, 1998.
DOI : 10.1016/S0029-5493(98)00189-7

J. Howard, M. Halbert, and A. Lubinski, Systematic Tracking of Fatigue and Crack Growth To Optimize Drillstring Reliability, SPE/IADC Drilling Conference, pp.22-25, 1993.
DOI : 10.2118/25775-MS

P. Destuynder, M. Djaoua, and S. Lescure, Quelques remarques sur la mécanique de la rupture élastique, Journal de Mécanique Théorique et Appliqué, vol.2, pp.113-135, 1983.

A. Shahani and S. Habibi, Stress intensity factors in a hollow cylinder containing a circumferential semi-elliptical crack subjected to combined loading, International Journal of Fatigue, vol.29, issue.1, pp.128-140, 2007.
DOI : 10.1016/j.ijfatigue.2006.01.017

A. Sikal, J. Boulet, S. Menand, and H. Sellami, Drillpipe Stress Distribution and Cumulative Fatigue Analysis in Complex Well Drilling: New Approach in Fatigue Optimization, SPE Annual Technical Conference and Exhibition, 2008.
DOI : 10.2118/116029-MS