Z. N. Azwa, B. F. Yousif, A. C. Manalo, and W. Karunasena, A review on the degradability of polymeric composites based on natural fibres, Materials & Design, vol.47, pp.424-442, 2013.
DOI : 10.1016/j.matdes.2012.11.025

G. Camino, M. P. Luda, A. Y. Polishchuk, M. Revellino, R. Blancon et al., Kinetic aspects of water sorption in polyester-resin/Glass-fibre composites Compos

H. Dhakal, Z. Zhang, and M. Richardson, Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites, Composites Science and Technology, vol.67, issue.7-8, pp.7-8, 2007.
DOI : 10.1016/j.compscitech.2006.06.019

M. Assarar, D. Scida, A. Mahi, C. Poilâne, and R. Ayad, Influence of water ageing on mechanical properties and damage events of two reinforced composite materials: Flax???fibres and glass???fibres, Materials & Design, vol.32, issue.2, pp.788-795, 2010.
DOI : 10.1016/j.matdes.2010.07.024

P. Joseph, M. Rabello, L. Mattoso, K. Joseph, and S. Thomas, Environmental effects on the degradation behaviour of sisal fibre reinforced polypropylene composites, Composites Science and Technology, vol.62, issue.10-11, pp.10-11, 2002.
DOI : 10.1016/S0266-3538(02)00080-5

. Sessi, Le 4 pages des statistiques industrielles -Les bateaux de plaisance. Cap sur la croissance, Ministère de l'Economie, des Finances et de l'Industrie, 2006.

J. Group, The global composite fibre market: a bright future, pp.16-24, 2012.

Y. Perrot, Influence des propriétés de la matrice sur le comportement mécanique de matériaux composites verre / polyester utilisés en construction navale de plaisance - Cas des résines polyester limitant les émissions de styrène, 2006.

J. Graham-jones and J. Summerscales, Marine applications of advanced fibrereinforced composites, pp.74-76, 2015.

A. B. Buechler, The European GRP (glass fibre reinforced plastics) market in 2014, 2014.

D. B. Dittenber and H. V. Gangarao, Critical review of recent publications on use of natural composites in infrastructure, Composites Part A: Applied Science and Manufacturing, vol.43, issue.8, pp.1419-1429, 2012.
DOI : 10.1016/j.compositesa.2011.11.019

D. Rapport and C. Baley, Coeficient de sécurité dans les structures en matériaux composites utilisées en construction navale et dans l'industrie, 1993.

A. P. Mouritz, A. Kootsookos, and G. Mathys, Stability of polyester- and vinyl ester-based composites in seawater, Journal of Materials Science, vol.39, issue.19, pp.6073-6077, 2004.
DOI : 10.1023/B:JMSC.0000041704.71226.ee

A. Apicella, C. Migliaresi, L. Nicolais, L. Iaccarino, and S. Roccotelli, The water ageing of unsaturated polyester-based composites: influence of resin chemical structure, Composites, vol.14, issue.4, pp.387-392, 1983.
DOI : 10.1016/0010-4361(83)90160-X

L. Penn and E. Bowler, A new approach to surface energy characterization for adhesive performance prediction, Surface and Interface Analysis, vol.2, issue.4, pp.161-164, 1981.
DOI : 10.1002/sia.740030405

B. Miller, P. Muri, and L. Rebenfeld, A microbond method for determination of the shear strength of a fiber/resin interface, Composites Science and Technology, vol.28, issue.1, pp.17-32, 1987.
DOI : 10.1016/0266-3538(87)90059-5

R. Joffe, J. Andersons, and L. Wallstrom, Interfacial shear strength of flax fiber/thermoset polymers estimated by fiber fragmentation tests, Journal of Materials Science, vol.36, issue.9-10, pp.2721-2723, 2005.
DOI : 10.1007/s10853-005-2115-4

P. Mallick, Fiber Reinforced Composites. Materials, Manufacturing and Design, 1997.

H. Keush, K. Oueck, and K. Gliesche, Influence of glass fibre/epoxy resin interface on static mechanical properties of unidirectional composites and on fatigue performance of cross ply composites, Composites Part A: Applied Science and Manufacturing, vol.29, issue.5-6, 1998.
DOI : 10.1016/S1359-835X(97)00106-1

G. Lubin, Hand book of composites, Van Nostra. Van Nostrand Reinhold Company Regional: Van Nostrand Reinhold Company Regional, 1982.

A. Bergeret and P. Krawczak, Liaison renfort / matrice Comportement des composites, 2006.

J. L. Thomason, The interface region in glass fibre-reinforced epoxy resin composites: 2. Water absorption, voids and the interface, Composites, vol.26, issue.7, pp.477-485, 1995.
DOI : 10.1016/0010-4361(95)96805-G

P. Davies, F. Pomiès, and L. Carlsson, Influence of water and accelerated aging on the shear fracture properties of glass/epoxy composite, Applied Composite Materials, vol.17, issue.4, pp.71-87, 1996.
DOI : 10.1007/BF00158994

E. P. Gellert and D. M. Turley, Seawater immersion ageing of glass-fibre reinforced polymer laminates for marine applications, Composites Part A: Applied Science and Manufacturing, vol.30, issue.11, pp.1259-1265, 1999.
DOI : 10.1016/S1359-835X(99)00037-8

A. Durier, Contribution à l'étude de l'interaction contraintes-diffusion dans les polyméres, Ecole Arts et Métiers ParisTech, 2008.

A. Boisseau, Etude de la tenue à long term de matériaux composites immergés pour structures de récupération d'énergies marines, 2011.

T. Peret, S. Clement, F. Freour, and . Jacquemin, Numerical transient hygro-elastic analyses of reinforced Fickian and non-Fickian polymers, Composite Structures, vol.116, issue.1, pp.395-403, 2014.
DOI : 10.1016/j.compstruct.2014.05.026

URL : https://hal.archives-ouvertes.fr/hal-01154408

B. Fayolle and J. Verdu, Vieillissement physique des matériaux polymères, pp.1-19, 2005.

H. Carter and K. Kibler, Langmuir-Type Model for Anomalous Moisture Diffusion In Composite Resins, Journal of Composite Materials, vol.10, issue.2, pp.118-131, 1978.
DOI : 10.1177/002199837801200201

A. Tcharkhtchi, P. Bronnec, and J. Verdu, Water absorption characteristics of diglycidylether of butane diol???3,5-diethyl-2,4-diaminotoluene networks, Polymer, vol.41, issue.15, pp.5777-85, 2000.
DOI : 10.1016/S0032-3861(99)00801-0

S. Popineau, C. Rondeau-mouro, C. Sulpice-gaillet, and M. Shanahan, Free/bound water absorption in an epoxy adhesive, Polymer, vol.46, issue.24, pp.10733-10740, 2005.
DOI : 10.1016/j.polymer.2005.09.008

URL : https://hal.archives-ouvertes.fr/hal-00157171

Y. J. Weitsman, Effects of Fluids on Polymeric Composites???A Review, Comprehensive Composite Materials Oxford: Pergamon, pp.369-401, 2000.
DOI : 10.1016/B0-08-042993-9/00068-1

K. Liao, C. R. Schultheisz, and D. L. Hunston, Effects of environmental aging on the properties of pultruded GFRP, Composites Part B: Engineering, vol.30, issue.5, pp.485-493, 1999.
DOI : 10.1016/S1359-8368(99)00013-X

J. G. Iglesias, J. González-benito, A. J. Aznar, J. Bravo, and J. Baselga, Effect of Glass Fiber Surface Treatments on Mechanical Strength of Epoxy Based Composite Materials, Journal of Colloid and Interface Science, vol.250, issue.1, pp.251-60, 2002.
DOI : 10.1006/jcis.2002.8332

P. Davies and D. Choqueuse, Chapter, Ageing of Composites, pp.326-353, 2008.

D. Mouzakis, H. Zoga, and C. Galiotis, Accelerated environmental ageing study of polyester/glass fiber reinforced composites (GFRPCs), Composites Part B: Engineering, vol.39, issue.3, pp.467-475, 2008.
DOI : 10.1016/j.compositesb.2006.10.004

Y. J. Weitsman, Fluid Effects in Polymers and Polymeric Composites, p.193, 2012.
DOI : 10.1007/978-1-4614-1059-1

F. B. Boukhoulda, L. Guillaumat, J. L. Lataillade, E. Adda-bedia, and A. Lousdad, Aging-impact coupling based analysis upon glass/polyester composite material in hygrothermal environment, Materials & Design, vol.32, issue.7, pp.4080-4087, 2011.
DOI : 10.1016/j.matdes.2011.03.009

C. L. Schutte, Environmental durability of glass-fiber composites, Materials Science and Engineering: R: Reports, vol.13, issue.7, pp.265-323, 1994.
DOI : 10.1016/0927-796X(94)90002-7

J. L. Koenig and H. Emadipour, Mechanical characterization of the interfacial strength of glass-reinforced composites, Polymer Composites, vol.5, issue.3, pp.142-150, 1985.
DOI : 10.1002/pc.750060303

J. L. Thomason, The interface region in glass fibre-reinforced epoxy resin composites: 1. Sample preparation, void content and interfacial strength, Composites, vol.26, issue.7, pp.467-475, 1995.
DOI : 10.1016/0010-4361(95)96804-F

G. Camino, M. P. Luda, A. Y. Polishchuk, and M. Revellino, Chemical structure and water diffusion in polyester resin-glass fibres composites, Composites, vol.18, pp.40-49, 1996.

A. Fraga, V. Alvarez, and A. Vazquez, Relationship between Dynamic Mechanical Properties and Water Absorption of Unsaturated Polyester and Vinyl Ester Glass Fiber Composites, Journal of Composite Materials, vol.37, issue.17, pp.1553-1574, 2003.
DOI : 10.1177/0021998303029421

P. Davies, R. Baizeau, D. Choqueuse, L. Salmon, and F. Nagot, Aging and long term behavior of composite tubes. Recent developments in durability analysis of composite systems, Duracosys, 1999.

F. Richard and D. Perreux, The safety-factor calibration of laminates for long-term applications: behavior model and reliability method, Composites Science and Technology, vol.61, issue.14, pp.2087-94, 2001.
DOI : 10.1016/S0266-3538(01)00154-3

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy, Polymer, vol.40, issue.20, pp.5505-5512, 1999.
DOI : 10.1016/S0032-3861(98)00790-3

E. Boinard, R. Pethrick, J. Dalzel-job, and C. Macfarlane, Influence of resin chemistry on water uptake and environmental ageing in glass fibre reinforced composites-polyester and vinyl ester laminates, Journal of Materials Science, vol.35, issue.8, pp.1931-1937, 2000.
DOI : 10.1023/A:1004766418966

G. Z. Xiao and M. E. Shanahan, Swelling of DGEBA/DDA epoxy resin during hygrothermal ageing, Polymer, vol.39, issue.14, pp.3253-3260, 1998.
DOI : 10.1016/S0032-3861(97)10060-X

A. K. Mohanty, M. Misra, L. T. Drzal, S. E. Selke, B. R. Harte et al., Natural Fibers, Biopolymers, and Biocomposites, Natural fibers, biopolymers, and biocomposites, pp.15-50, 2013.
DOI : 10.1201/9780203508206.ch1

D. U. Shah, P. J. Schubel, and M. J. Clifford, Can flax replace E-glass in structural composites? A small wind turbine blade case study, Composites Part B: Engineering, vol.52, pp.172-181, 2013.
DOI : 10.1016/j.compositesb.2013.04.027

O. Faruk, A. K. Bledzki, H. Fink, and M. Sain, Biocomposites reinforced with natural fibers: 2000???2010, Progress in Polymer Science, vol.37, issue.11, pp.1552-1596, 2000.
DOI : 10.1016/j.progpolymsci.2012.04.003

A. Winfield, Jute reinforced polyester project for UNIDO, Govt of India, Plast. Rubber Int, vol.4, issue.23, 1979.

I. Daniel and T. Liber, Strain rate effects on the mechanical properties of fiber composites, 1976.

L. M. Welsh and J. Harding, EFFECT OF STRAIN RATE ON THE TENSILE FAILURE OF WOVEN REINFORCED POLYESTER RESIN COMPOSITES, Le Journal de Physique Colloques, vol.46, issue.C5, pp.405-414, 1985.
DOI : 10.1051/jphyscol:1985551

URL : https://hal.archives-ouvertes.fr/jpa-00224782

P. J. Hine, R. A. Duckett, A. S. Kaddour, M. J. Hinton, and G. M. Wells, The effect of hydrostatic pressure on the mechanical properties of glass fibre/epoxy unidirectional composites, Composites Part A: Applied Science and Manufacturing, vol.36, issue.2, pp.279-289, 2005.
DOI : 10.1016/S1359-835X(04)00152-6

H. M. Ledbetter, ELASTIC CONSTANTS AND INTERNAL FRICTION OF REINFORCED COMPOSITES, Le Journal de Physique Colloques, vol.46, issue.C10, pp.10-573, 1985.
DOI : 10.1051/jphyscol:198510128

URL : https://hal.archives-ouvertes.fr/jpa-00225331

T. Paramasivam and A. P. Kalam, On the study of indigenous natural-fibre composites, Fibre Science and Technology, vol.7, issue.2, pp.85-88, 1974.
DOI : 10.1016/0015-0568(74)90020-7

H. Well, D. Bowden, I. Macphail, and P. Pal, The potential of jute and similar bast fibres as high specific stiffness reinforcement, 35th Annual Technical Conference, pp.1-7, 1980.

R. Heijenrath and T. Peijs, Natural-fibre-mat-reinforced thermoplastic composites based on flax fibres and polypropylene, Adv. Compos. Lett, vol.5, issue.3, pp.81-85, 1996.

K. Oksman, High Quality Flax Fibre Composites Manufactured by the Resin Transfer Moulding Process, Journal of Reinforced Plastics and Composites, vol.20, issue.7, pp.621-627, 2001.
DOI : 10.1177/073168401772678634

L. Y. Mwaikambo and M. P. , Hemp fibre reinforced cashew nut shell liquid composites, Composites Science and Technology, vol.63, issue.9, pp.1297-1305, 2003.
DOI : 10.1016/S0266-3538(03)00101-5

B. Madsen, H. Thygesen, and . Lilholt, Plant fibre composites ??? porosity and volumetric interaction, Composites Science and Technology, vol.67, issue.7-8, pp.1584-1600, 2007.
DOI : 10.1016/j.compscitech.2006.07.009

M. Hughes, J. Carpenter, and C. Hill, Deformation and fracture behaviour of flax fibre reinforced thermosetting polymer matrix composites, Journal of Materials Science, vol.282, issue.1, pp.2499-2511, 2007.
DOI : 10.1007/s10853-006-1027-2

D. Scida, M. Assarar, C. Poilâne, and R. Ayad, Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy composite, Composites Part B: Engineering, vol.48, pp.51-58, 2013.
DOI : 10.1016/j.compositesb.2012.12.010

B. Madsen, Properties of Plant Fibre Yarn Polymer Composites, 2004.

J. R. Duflou, D. Yelin, K. Van-acker, and W. Dewulf, Comparative impact assessment for flax fibre versus conventional glass fibre reinforced composites: Are bio-based reinforcement materials the way to go?, CIRP Annals - Manufacturing Technology, vol.63, issue.1, pp.1-4, 2014.
DOI : 10.1016/j.cirp.2014.03.061

C. Hill and M. Hughes, Natural Fibre Reinforced Composites Opportunities and Challenges, Journal of Biobased Materials and Bioenergy, vol.4, issue.2, pp.148-158, 2010.
DOI : 10.1166/jbmb.2010.1079

C. Baillie, Green composites: Polymer composites and the environment, Boca Raton, 2004.
DOI : 10.1201/9781439823408

T. Corbiere-nicollier, B. Laban, L. Lundquist, Y. Leterrier, J. Manson et al., Life cycle assessment of biofibres replacing glass fibres as reinforcement in plastics, Resources, Conservation and Recycling, vol.33, issue.4, pp.267-87, 2001.
DOI : 10.1016/S0921-3449(01)00089-1

L. Joshi, A. Drzal, S. Mohanty, and . Arora, Are natural fiber composites environmentally superior to glass fiber reinforced composites?, Composites Part A: Applied Science and Manufacturing, vol.35, issue.3
DOI : 10.1016/j.compositesa.2003.09.016

M. Patel, C. Bastioili, L. Marini, and E. Wurdinger, Environmental assessment of biobased polymers and natural fibers, Netherlands: Utrecht University, 2002.

A. L. Duigou, P. Davies, and C. Baley, Environmental Impact Analysis of the Production of Flax Fibres to be Used as Composite Material Reinforcement, Journal of Biobased Materials and Bioenergy, vol.5, issue.1
DOI : 10.1166/jbmb.2011.1116

URL : https://hal.archives-ouvertes.fr/hal-00714977

L. Yan, N. Chouw, and K. Jayaraman, Flax fibre and its composites ??? A review, Composites Part B: Engineering, vol.56, pp.296-317, 2014.
DOI : 10.1016/j.compositesb.2013.08.014

J. Summerscales, N. P. Dissanayake, A. S. Virk, and W. Hall, A review of bast fibres and their composites. Part 1 ??? Fibres as reinforcements, Composites Part A: Applied Science and Manufacturing, vol.41, issue.10
DOI : 10.1016/j.compositesa.2010.06.001

J. Holbery and D. Houston, Natural-fiber-reinforced polymer composites in automotive applications, JOM, vol.70, issue.5, pp.80-86, 2006.
DOI : 10.1007/s11837-006-0234-2

L. Marrot, A. Bourmaud, P. Bono, and C. Baley, Multi-scale study of the adhesion between flax fibers and biobased thermoset matrices, Materials & Design (1980-2015), vol.62, pp.47-56, 2014.
DOI : 10.1016/j.matdes.2014.04.087

URL : https://hal.archives-ouvertes.fr/hal-01011489

J. Van-dam, Environmental benefits of natural fibre production and use, Proceedings of the symposium on natural fibres, 2009.

H. Cheung, M. Ho, K. Lau, F. Cardona, and D. Hui, Natural fibre-reinforced composites for bioengineering and environmental engineering applications Compos

M. Carus and L. Scholz, Targets for bio-based composites and natural fibres, pp.24-29, 2011.

D. U. Shah, Natural fibre composites: Comprehensive Ashby-type materials selection charts, Materials & Design (1980-2015), vol.62, pp.21-31, 2014.
DOI : 10.1016/j.matdes.2014.05.002

K. Charlet, C. Baley, C. Morvan, J. P. Jernot, M. Gomina et al., Characteristics of Herm??s flax fibres as a function of their location in the stem and properties of the derived unidirectional composites, Composites Part A: Applied Science and Manufacturing, vol.38, issue.8
DOI : 10.1016/j.compositesa.2007.03.006

A. Lewington, Plants for people, ISBN: 1-90. Eden project books, 2003.

D. Shah, P. J. Schubel, P. Licence, and M. J. Clifford, Hydroxyethylcellulose surface treatment of natural fibres: the new ???twist??? in yarn preparation and optimization for composites applicability, Journal of Materials Science, vol.15, issue.30, pp.2700-2711, 2012.
DOI : 10.1007/s10853-011-6096-1

A. K. Bledzki and J. Gassan, Composites reinforced with cellulose based fibres, Progress in Polymer Science, vol.24, issue.2, pp.221-274, 1999.
DOI : 10.1016/S0079-6700(98)00018-5

. Fao, Natural fibres, 2009.

R. Joffe, J. Andersons, and L. Wallström, Strength and adhesion characteristics of elementary flax fibres with different surface treatments, Composites Part A: Applied Science and Manufacturing, vol.34, issue.7
DOI : 10.1016/S1359-835X(03)00099-X

C. Baley, Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase, Composites Part A: Applied Science and Manufacturing, vol.33, issue.7, pp.939-948, 2002.
DOI : 10.1016/S1359-835X(02)00040-4

K. Charlet, S. Eve, J. P. Jernot, M. Gomina, and J. Breard, Tensile deformation of a flax fiber, Procedia Engineering, vol.1, issue.1, pp.233-236, 2009.
DOI : 10.1016/j.proeng.2009.06.055

C. T. Brett and K. W. Wamdron, Physiology and biochemistry of plant cell walls, Chapman et, 1996.

R. D. Preston, The physical biology of plant cell walls, Chapman an, 1974.

A. Bismarck, S. Mishra, and L. , Plant fibres as reinforcement for green composites, Natural fibers, biopolymers and biocomposites, pp.37-108, 2005.

A. Regazzi, A contribution to the study of the coupled thermo-hydro-mechanical aging of PLA/flax biocomposites, 2013.
URL : https://hal.archives-ouvertes.fr/pastel-00958086

C. Baley, Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase, Composites Part A: Applied Science and Manufacturing, vol.33, issue.7, pp.939-948, 2002.
DOI : 10.1016/S1359-835X(02)00040-4

J. Summerscales, N. Dissanayake, A. Virk, and W. Hall, A review of bast fibres and their composites. Part 2 ??? Composites, Composites Part A: Applied Science and Manufacturing, vol.41, issue.10, pp.1336-1344, 2010.
DOI : 10.1016/j.compositesa.2010.05.020

H. Spatz, L. , and K. J. Niklas, Mechanical behaviour of plant tissues : composite materials or structures ?, J. Exp. Biol, vol.202, pp.3269-72, 1999.

A. Bourmaud and C. Baley, Rigidity analysis of polypropylene/vegetal fibre composites after recycling, Polymer Degradation and Stability, vol.94, issue.3, pp.297-305, 2009.
DOI : 10.1016/j.polymdegradstab.2008.12.010

URL : https://hal.archives-ouvertes.fr/hal-00402010

K. Nyholm, P. Ander, S. Bardage, and G. Daniel, Dislocations in pulp fibres - their origin, characteristics and importance - a review, Nordic Pulp and Paper Research Journal, vol.16, issue.04, pp.376-384, 2001.
DOI : 10.3183/NPPRJ-2001-16-04-p376-384

C. Baily, Influence of kink bands on the tensile strength of flax fibers, Journal of Materials Science, vol.39, issue.1, pp.331-342, 2004.
DOI : 10.1023/B:JMSC.0000007768.63055.ae

W. Wang, M. Sain, and P. Cooper, Study of moisture absorption in natural fiber plastic composites, Composites Science and Technology, vol.66, issue.3-4, pp.379-86, 2006.
DOI : 10.1016/j.compscitech.2005.07.027

R. Simha and R. F. Boyer, On a General Relation Involving the Glass Temperature and Coefficients of Expansion of Polymers, The Journal of Chemical Physics, vol.37, issue.5, pp.1003-1007, 1962.
DOI : 10.1063/1.1733201

M. Adamson, Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials, Journal of Materials Science, vol.98, issue.2, pp.1736-1745, 1980.
DOI : 10.1007/BF00550593

D. Liu and S. Park, A Note on the Normalized Approach to Simulating Moisture Diffusion in a Multimaterial System Under Transient Thermal Conditions Using <scp>ansys</scp> 14 and 14, J. Electron. Packag, vol.5, issue.136 3, p.34501, 2014.

S. Yoon, B. Han, and Z. Wang, On Moisture Diffusion Modeling Using Thermal-Moisture Analogy, Journal of Electronic Packaging, vol.129, issue.4, p.421, 2007.
DOI : 10.1115/1.2804090

J. Verdu, Vieillissement chimique des plastiques : aspects généraux, pp.1-14, 2002.

J. Verdu, Action de l'eau sur les plastiques, pp.1-8, 2000.

H. Abeysinghe, W. Edwards, G. Pritchard, and G. Swampillai, Degradation of crosslinked resins in water and electrolyte solutions, Polymer, vol.23, issue.12, pp.1785-90, 1982.
DOI : 10.1016/0032-3861(82)90123-9

B. Mortaigne, Vieillissement des composites -Mécanismes et méthodologie d ' étude, 2005.

Y. Perrot, C. Baley, and P. Davies, Influence of low styrene emission polyester resins on the aging behaviour of composites in a marine environment, JNC 15 (Marseille), 2007.

K. Tonyali and C. E. Rogers, Stress-Cracking of high density polyethylene in detergents, Polymer Engineering and Science, vol.24, issue.1, pp.82-85, 1987.
DOI : 10.1002/pen.760270112

J. C. Arnold, The influence of liquid uptake on environmental stress cracking of glassy polymers, Materials Science and Engineering: A, vol.197, issue.1, pp.119-124, 1995.
DOI : 10.1016/0921-5093(94)09759-3

F. Saint-antonin, Essais de fluage, Techniques De L'Ingénieur, 1995.

M. Akay, Introduction to polymer science and technology, 2012.

B. Mortaigne, Vieillissement des composites -Evolution des propriétés et modélisation, 2005.

A. Stamboulis, C. Baillie, S. Garkhail, H. Van-melick, and T. Peijs, Environmental durability of flax fibres and their composites based on polypropylene matrix, Applied Composite Materials, vol.7, issue.5/6, pp.273-94, 2000.
DOI : 10.1023/A:1026581922221

A. L. Duigou, P. Davies, and C. Baley, Seawater ageing of flax/poly(lactic acid) biocomposites, Polymer Degradation and Stability, vol.94, issue.7, pp.1151-1162, 2009.
DOI : 10.1016/j.polymdegradstab.2009.03.025

A. Arbelaiz, B. Fernández, J. Ramos, A. Retegi, R. Llano-ponte et al., Mechanical properties of short flax fibre bundle/polypropylene composites: Influence of matrix/fibre modification, fibre content, water uptake and recycling, Composites Science and Technology, vol.65, issue.10, pp.1582-1592, 2005.
DOI : 10.1016/j.compscitech.2005.01.008

A. Espert, F. Vilaplana, and S. Karlsson, Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties, Composites Part A: Applied Science and Manufacturing, vol.35, issue.11, pp.1267-1276, 2004.
DOI : 10.1016/j.compositesa.2004.04.004

A. Bismarck, I. Aranbefwi-askargorta, J. Springer, T. Lampkfc, and B. Wielage, Surface characterization of flax, hemp and cellulose fibers; Surface properties and the water uptake behavior, Polymer Composites, vol.13, issue.5, pp.872-894, 2002.
DOI : 10.1002/pc.10485

A. L. Duigou, A. Bourmaud, P. Davies, and C. Baley, Long term immersion in natural seawater of Flax/PLA biocomposite, Ocean Engineering, vol.90, pp.140-148, 2014.
DOI : 10.1016/j.oceaneng.2014.07.021

URL : https://hal.archives-ouvertes.fr/hal-01115476

L. B. Manfredi, E. S. Rodríguez, M. Wladyka-przybylak, and A. Vázquez, Thermal degradation and fire resistance of unsaturated polyester, modified acrylic resins and their composites with natural fibres, Polymer Degradation and Stability, vol.91, issue.2, pp.255-261, 2006.
DOI : 10.1016/j.polymdegradstab.2005.05.003

P. Methacanon, U. Weerawatsophon, N. Sumransin, C. Prahsarn, and D. T. Bergado, Properties and potential application of the selected natural fibers as limited life geotextiles, Carbohydrate Polymers, vol.82, issue.4, pp.1090-1096, 2010.
DOI : 10.1016/j.carbpol.2010.06.036

A. Célino, O. Gonçalves, F. Jacquemin, and S. Fréour, Qualitative and quantitative assessment of water sorption in natural fibres using ATR-FTIR spectroscopy, Carbohydrate Polymers, vol.101, pp.163-170, 2014.
DOI : 10.1016/j.carbpol.2013.09.023

A. Roudier, Thèse: Analyse multi-échelle du comportement hygro-mécanique des fibres de lin, École Doctorale Sciences pour l'Ingénieur de Clermont-Ferrand, 2012.

A. Célino, S. Fréour, F. Jacquemin, and P. Casari, Characterization and modeling of the moisture diffusion behavior of natural fibers, Journal of Applied Polymer Science, vol.36, issue.1, pp.297-306, 2013.
DOI : 10.1002/app.39148

F. Gouanvé, S. Marais, D. Bessadok, M. Langevin, and . Métayer, Kinetics of water sorption in flax and PET fibers, European Polymer Journal, vol.43, issue.2, pp.586-598, 2007.
DOI : 10.1016/j.eurpolymj.2006.10.023

J. Jedidi, F. Jacquemin, and A. Vautrin, Accelerated hygrothermal cyclical tests for carbon/epoxy laminates, Composites Part A: Applied Science and Manufacturing, vol.37, issue.4, pp.636-645, 2006.
DOI : 10.1016/j.compositesa.2005.05.007

URL : https://hal.archives-ouvertes.fr/hal-01007828

W. K. Loh, A. D. Crocombe, M. M. Wahab, and I. A. Ashcroft, Modelling anomalous moisture uptake, swelling and thermal characteristics of a rubber toughened epoxy adhesive, International Journal of Adhesion and Adhesives, vol.25, issue.1, pp.1-12, 2005.
DOI : 10.1016/j.ijadhadh.2004.02.002

A. Roudier, K. Charlet, F. Moreno, E. Toussaint, C. Géneau-sbartaï et al., Caract??risation des propri??t??s biochimiques et hygroscopiques d???une fibre de lin, Mat??riaux & Techniques, vol.100, issue.5, pp.525-535, 2012.
DOI : 10.1051/mattech/2012044

A. Stamboulis, C. A. Baillie, and T. Peijs, Effects of environmental conditions on mechanical and physical properties of flax fibers, Composites Part A: Applied Science and Manufacturing, vol.32, issue.8, pp.1105-1115, 2001.
DOI : 10.1016/S1359-835X(01)00032-X

S. Chen and P. Tsai, Effects of post-curing of unsaturated polyester resins in various media, Polymer Engineering and Science, vol.57, issue.11, pp.775-781, 1977.
DOI : 10.1002/pen.760171103

J. Zhou and J. P. Lucas, Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature, Polymer, vol.40, issue.20, pp.5513-5522, 1999.
DOI : 10.1016/S0032-3861(98)00791-5

G. Magnus, D. R. , and F. E. Critchfield, Stability of Urethan Elastomers in Water, Dry Air and Moist Air Environments, Rubber Chemistry and Technology, vol.39, issue.4, pp.1328-1333, 1966.
DOI : 10.5254/1.3547141

C. Shen and G. Springer, Moisture Absorption and Desorption of Composite Materials, Journal of Composite Materials, vol.10, issue.1, pp.2-20, 1976.
DOI : 10.1177/002199837601000101

D. Zhang, N. R. Milanovic, Y. Zhang, F. Su, and M. Miao, Effects of humidity conditions at fabrication on the interfacial shear strength of flax/unsaturated polyester composites, Composites Part B: Engineering, vol.60, issue.2014, pp.186-192, 2014.
DOI : 10.1016/j.compositesb.2013.12.031

S. Lee and S. Wang, Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent, Composites Part A: Applied Science and Manufacturing, vol.37, issue.1, pp.80-91, 2006.
DOI : 10.1016/j.compositesa.2005.04.015

A. Loos, G. Springer, B. Sanders, and R. Tung, Moisture Absorption of Polyester-E Glass Composites, Journal of Composite Materials, vol.14, issue.2, pp.142-154, 1980.
DOI : 10.1177/002199838001400206

Y. Xie, C. A. Hill, Z. Xiao, H. Militz, and C. Mai, Silane coupling agents used for natural fiber/polymer composites: A review, Composites Part A: Applied Science and Manufacturing, vol.41, issue.7, pp.806-819, 2010.
DOI : 10.1016/j.compositesa.2010.03.005

S. Donath, H. Militz, and C. Mai, Creating water-repellent effects on wood by treatment with silanes, Holzforschung, vol.60, issue.1, pp.40-46, 2006.
DOI : 10.1515/HF.2006.008

B. Singh, M. Gupta, and A. Verma, Influence of fiber surface treatment on the properties of sisal-polyester composites, Polymer Composites, vol.20, issue.6, pp.910-928, 1996.
DOI : 10.1002/pc.10684

M. S. Sreekala and S. Thomas, Effect of fibre surface modification on water-sorption characteristics of oil palm fibres, Composites Science and Technology, vol.63, issue.6, pp.861-869, 2003.
DOI : 10.1016/S0266-3538(02)00270-1

C. A. Hill, H. P. Abdul, and A. Khalil, The effect of environmental exposure upon the mechanical properties of coir or oil palm fiber reinforced composites, Journal of Applied Polymer Science, vol.20, issue.6
DOI : 10.1002/1097-4628(20000808)77:6<1322::AID-APP17>3.0.CO;2-R

S. Alix, L. Lebrun, C. Morvan, and S. Marais, Study of water behaviour of chemically treated flax fibres-based composites: A way to approach the hydric interface, Composites Science and Technology, vol.71, issue.6
DOI : 10.1016/j.compscitech.2011.02.004

URL : https://hal.archives-ouvertes.fr/hal-00736293

S. Alix, E. Philippe, A. Bessadok, L. Lebrun, C. Morvan et al., Effect of chemical treatments on water sorption and mechanical properties of flax fibres, Bioresource Technology, vol.100, issue.20, pp.4742-4751, 2009.
DOI : 10.1016/j.biortech.2009.04.067

S. Halim, M. B. Amin, and A. G. Maadhah, Handbook of polymer degradation, Research I, 1992.

L. B. Manfredi, E. S. Rodriguez, M. Wladyka-przybylak, and A. Vazquez, Thermal degradation and fire resistance of unsaturated polyester, modified acrylic resins and their composites with natural fibres, Polymer Degradation and Stability, vol.91, issue.2, pp.255-261, 2006.
DOI : 10.1016/j.polymdegradstab.2005.05.003

V. Placet, Conception et exploitation d'un dispositif expérimental innovant pour la caractérisation du comportement viscoélastique et de la dégradation thermique du bois dans des conditions sévères, 2006.

N. Sombastsompop and K. Chaochanchaikul, Effect of moisture content on mechanical properties, thermal and structural stability and extrudate texture of poly(vinyl chloride)/wood sawdust composites, Polymer International, vol.53, issue.9, pp.1210-1228, 2004.
DOI : 10.1002/pi.1535

V. Placet, Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, pp.1111-1118, 2009.
DOI : 10.1016/j.compositesa.2009.04.031

URL : https://hal.archives-ouvertes.fr/hal-00395479

A. L. Duigou, A. Bourmaud, and C. Baley, In-situ evaluation of flax fibre degradation during water ageing, Industrial Crops and Products, vol.70, pp.204-210, 2015.
DOI : 10.1016/j.indcrop.2015.03.049

G. Ausias, M. Lebrun, C. Tachon, and . Baley, Observation of the structure of a composite polypropylene/flax and damage mechanisms under stress, Ind. Crops Prod, vol.43, pp.225-236, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00985158

C. Baley, Y. Perrot, F. Busnel, H. Guezenoc, and P. Davies, Transverse tensile behaviour of unidirectional plies reinforced with flax fibres, Materials Letters, vol.60, issue.24, pp.2984-2987, 2006.
DOI : 10.1016/j.matlet.2006.02.028

URL : https://hal.archives-ouvertes.fr/hal-00495136

K. Almgrem, Wood-fibre Composites: Stress Transfer and Hygroexpansion, Technology School of Chemical Sciences and Engineering Royal Institute of Technology, 2010.

V. Placet, Influence de traitements hygrothermiques sur les propriétés mécaniques de composites à fibres végétales, Comptes Rendus des JNC 16, 2009.

A. Bourmaud, C. Morvan, and C. Baley, Importance of fiber preparation to optimize the surface and mechanical properties of unitary flax fiber, Industrial Crops and Products, vol.32, issue.3, pp.662-667, 2010.
DOI : 10.1016/j.indcrop.2010.08.002

URL : https://hal.archives-ouvertes.fr/hal-00717229

H. Chen, M. Miao, and X. Ding, Influence of moisture absorption on the interfacial strength of bamboo/vinyl ester composites, Composites Part A: Applied Science and Manufacturing, vol.40, issue.12, pp.2013-2019, 2009.
DOI : 10.1016/j.compositesa.2009.09.003

E. Vauthier, J. C. Abry, T. Bailliez, and . Chateauminois, Interactions between hygrothermal ageing and fatigue damage in unidirectional glass/epoxy composites, Composites Science and Technology, vol.58, issue.5, pp.687-692, 1998.
DOI : 10.1016/S0266-3538(97)00149-8

F. Mcbagonluri, K. Garcia, M. Hayes, K. N. Verghese, and J. J. Lesko, Characterization of fatigue and combined environment on durability performance of glass/vinyl ester composite for infrastructure applications, International Journal of Fatigue, vol.22, issue.1, pp.53-64, 2000.
DOI : 10.1016/S0142-1123(99)00100-0

G. C. Papanicolaou, A. G. Xepapadaki, and D. Zarouchas, Effect of the water uptake on the creeep behavior of glass-epoxy composites, 13th European Conference on Composite Materials, 2008.

G. Marom, The Role of Water Transport in Composite Materials, Polymer permeability, pp.341-374, 1985.
DOI : 10.1007/978-94-009-4858-7_9

L. Greenspan, Humidity fixed points of binary saturated aqueous solutions, Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry, vol.81, issue.1, 1977.
DOI : 10.6028/jres.081A.011

S. Corn, J. Dupuy, P. Ienny, and L. Daridon, Vibration analysis techniques for detecting filler-matrix decohesion in composites, Revue des composites et des mat??riaux avanc??s, vol.22, issue.1, pp.77-90, 2012.
DOI : 10.3166/rcma.22.77-90

URL : https://hal.archives-ouvertes.fr/hal-00797606

R. F. Gibson, Modal vibration response measurements for characterization of composite materials and structures, Composites Science and Technology, vol.60, issue.15, pp.2769-2780, 2000.
DOI : 10.1016/S0266-3538(00)00092-0

Y. Chevalier, Essais dynamiques sur composites -Caractérisation aux basses fréquences, pp.1-14, 2002.

C. Mattrand, A. Béakou, and K. Charlet, Numerical modeling of the flax fiber morphology variability, Composites Part A: Applied Science and Manufacturing, vol.63, pp.10-20, 2014.
DOI : 10.1016/j.compositesa.2014.03.020

J. Thomason, J. Carruthers, J. Kelly, and G. Johnson, Fibre cross-section determination and variability in sisal and flax and its effects on fibre performance characterisation, Composites Science and Technology, vol.71, issue.7, pp.1008-1023, 2011.
DOI : 10.1016/j.compscitech.2011.03.007

URL : https://hal.archives-ouvertes.fr/hal-00743446

Q. Liu and M. Hughes, The fracture behaviour and toughness of woven flax fibre reinforced epoxy composites, Composites Part A: Applied Science and Manufacturing, vol.39, issue.10, pp.1644-1652, 2008.
DOI : 10.1016/j.compositesa.2008.07.008

A. R. Sanadi, S. V. Prasad, and P. K. Rohatgi, SEM observations on the origins of toughness of natural fibre???polyester composites, Journal of Materials Science Letters, vol.28, issue.4, pp.395-396, 1986.
DOI : 10.1007/BF01672338

A. C. De-albuquerque, K. Joseph, L. H. De-carvalho, and J. R. Almeida, Effect of wettability and ageing conditions on the physical and mechanical properties of uniaxially oriented jute-roving-reinforced polyester composites, Composites Science and Technology, vol.60, issue.6, pp.833-844, 2000.
DOI : 10.1016/S0266-3538(99)00188-8

B. Lamy and C. Baley, Stiffness prediction of flax fibers?epoxy composite materials, Journal of Materials Science Letters, vol.19, issue.11, pp.979-80, 2000.
DOI : 10.1023/A:1006776423764

A. K. Mohanty, M. Mishra, and L. T. , Natural fibers, biopolymers and biocomposites, Boca Raton, 2005.

F. , C. Jr, and J. L. Thomason, Thermoelastic anisotropy of a natural fiber, Compos. Sci. Technol, vol.62, issue.5, pp.669-678, 2002.

H. Lilholt and A. Bjerre, Composites based on jute-fibres and polypro-pylene matrix, their fabrication and characterization, Proceedings of the 18th Risø international symposium on materials science. Polymeric composites ? expanding the limits

D. Hepworth, J. Vincent, G. Jeronimidis, and D. Bruce, The penetration of epoxy resin into plant fibre cell walls increases the stiffness of plant fibre composites, Composites Part A: Applied Science and Manufacturing, vol.31, issue.6, pp.599-601, 2000.
DOI : 10.1016/S1359-835X(99)00097-4

P. Campo and . Cianciafara, Comparison of seawater absorption properties of thermoset resins based composites, Compos. Part A Appl. Sci. Manuf, vol.42, issue.2, pp.123-130, 2011.

B. Madsen and H. Lilholt, Physical and mechanical properties of unidirectional plant fibre composites???an evaluation of the influence of porosity, Composites Science and Technology, vol.63, issue.9, pp.1265-1272, 2003.
DOI : 10.1016/S0266-3538(03)00097-6

Y. Nikishkov, L. Airoldi, and A. Makeev, Measurement of voids in composites by X-ray Computed Tomography, Composites Science and Technology, vol.89, pp.89-97, 2013.
DOI : 10.1016/j.compscitech.2013.09.019

J. Mackenzie, The Elastic Constants of a Solid containing Spherical Holes, Proceedings of the Physical Society. Section B, vol.63, issue.1, 1950.
DOI : 10.1088/0370-1301/63/1/302

S. Rassmann, R. G. Reid, and R. Paskaramoorthy, Effects of processing conditions on the mechanical and water absorption properties of resin transfer moulded kenaf fibre reinforced polyester composite laminates, Composites Part A: Applied Science and Manufacturing, vol.41, issue.11, pp.1612-1619, 2010.
DOI : 10.1016/j.compositesa.2010.07.009

M. P. Foulc, A. Bergeret, L. Ferry, P. Ienny, and A. Crespy, Study of hygrothermal ageing of glass fibre reinforced PET composites, Polymer Degradation and Stability, vol.89, issue.3, pp.461-470, 2005.
DOI : 10.1016/j.polymdegradstab.2005.01.025

P. M. Jacobs and F. R. Jones, Diffusion of moisture into two-phase polymers, Journal of Materials Science, vol.24, issue.7, pp.2331-2336, 1989.
DOI : 10.1007/BF01174492

P. A. Sreekumar, K. Joseph, G. Unnikrishnan, and S. Thomas, A comparative study on mechanical properties of sisal-leaf fibre-reinforced polyester composites prepared by resin transfer and compression moulding techniques, Composites Science and Technology, vol.67, issue.3-4, pp.3-4, 2007.
DOI : 10.1016/j.compscitech.2006.08.025

A. Visco, N. Campo, and P. Cianciafara, Comparison of seawater absorption properties of thermoset resins based composites, Composites Part A: Applied Science and Manufacturing, vol.42, issue.2, pp.123-130, 2011.
DOI : 10.1016/j.compositesa.2010.10.009

V. Feuillade, A. Bergeret, J. Quantin, and A. Crespy, Relationships between the glass fibre sizing composition and the surface quality of sheet moulding compounds (SMC) body panels, Composites Science and Technology, vol.66, issue.1, pp.115-127, 2006.
DOI : 10.1016/j.compscitech.2005.05.009

M. Kawagoe, M. Takeshima, M. Nomiya, J. Qiu, M. Morita et al., Microspectroscopic evaluations of the interfacial degradation by absorbed water in a model composite of an aramid fibre and unsaturated polyester, Polymer, vol.40, issue.6, pp.1373-1380, 1999.
DOI : 10.1016/S0032-3861(98)00371-1

M. D. Beg and K. L. Pickering, Accelerated weathering of unbleached and bleached Kraft wood fibre reinforced polypropylene composites, Polymer Degradation and Stability, vol.93, issue.10, pp.1939-1946, 2008.
DOI : 10.1016/j.polymdegradstab.2008.06.012

A. P. Mouritz, A. Kootsookos, and G. Mathys, Stability of polyester- and vinyl ester-based composites in seawater, Journal of Materials Science, vol.39, issue.19, pp.6073-6077, 2004.
DOI : 10.1023/B:JMSC.0000041704.71226.ee

A. Bergeret, I. Pires, M. P. Foulc, B. Abadie, L. Ferry et al., The hygrothermal behaviour of glass-fibre-reinforced thermoplastic composites: a prediction of the composite lifetime, Polymer Testing, vol.20, issue.7, pp.753-763, 2001.
DOI : 10.1016/S0142-9418(01)00030-7

L. S. Svetlik, An Investigation in the Hygrothermal Degradation of an E-glass / vinylester Composite in Humid and Immersion Environments, 2008.

A. K. Doolittle and D. B. Doolittle, Studies in Newtonian Flow. V. Further Verification of the Free???Space Viscosity Equation, Journal of Applied Physics, vol.28, issue.8, pp.901-905, 1957.
DOI : 10.1063/1.1722884

P. M. Jacobs and F. R. Jones, Influence of heterogeneous crosslink density on the thermomechanical and hygrothermal properties of an unsaturated polyester resin: 2. Hygrothermal studies, Polymer, vol.34, issue.10, pp.2122-2127, 1993.
DOI : 10.1016/0032-3861(93)90739-W

J. Zhou and J. P. Lucas, The effects of a water environment on anomalous absorption behavior in graphite/epoxy composites, Composites Science and Technology, vol.53, issue.1, pp.57-64, 1995.
DOI : 10.1016/0266-3538(94)00078-6

L. Gautier, B. Mortaigne, and V. Bellenger, Interface damage study of hydrothermally aged glass-fibre-reinforced polyester composites, Composites Science and Technology, vol.59, issue.16, pp.2329-2337, 1999.
DOI : 10.1016/S0266-3538(99)00085-8

A. L. Duigou, A. Bourmaud, E. Balnois, P. Davies, and C. Baley, Improving the interfacial properties between flax fibres and PLLA by a water fibre treatment and drying cycle, Industrial Crops and Products, vol.39, pp.31-39, 2012.
DOI : 10.1016/j.indcrop.2012.02.001

URL : https://hal.archives-ouvertes.fr/hal-00714954

R. D. Adams and M. M. Singh, The dynamic properties of fibre-reinforced polymers exposed to hot, wet conditions, Composites Science and Technology, vol.56, issue.8, pp.977-997, 1996.
DOI : 10.1016/0266-3538(96)00065-6

A. Athijayamani, M. Thiruchitrambalam, U. Natarajan, and B. Pazhanivel, Effect of moisture absorption on the mechanical properties of randomly oriented natural fibers/polyester hybrid composite, Materials Science and Engineering: A, vol.517, issue.1-2, pp.344-53, 2009.
DOI : 10.1016/j.msea.2009.04.027

S. J. Christian and S. L. Billington, Moisture diffusion and its impact on uniaxial tensile response of biobased composites, Composites Part B: Engineering, vol.43, issue.5, pp.2303-2312, 2012.
DOI : 10.1016/j.compositesb.2011.11.063

M. Autran, R. Pauliard, L. Gautier, B. Mortaigne, F. Mazeas et al., Influence of mechanical stresses on the hydrolytic aging of standard and low styrene unsaturated polyester composites, Journal of Applied Polymer Science, vol.16, issue.12, pp.2185-2195, 2002.
DOI : 10.1002/app.10419

A. Regazzi, Analyse in situ de la durabilité de matériaux composites biosourcés, 2011.

D. J. Pawson and F. R. Jones, The Role of Silane Treatment on the Retained Interlaminar Shear Strengths of Aqueous Conditioned Glass Fibre Composites, Proceedings of the Third International Conference on Composite Interfaces, pp.407-422, 1990.
DOI : 10.1007/978-94-011-7816-7_39

K. Friedrich, Application of fracture mechanics to composite materials, p.397, 1989.

G. Youssef, F. Jacquemin, and S. Fréour, Radial pressure and thickness effects on the moisture diffusion in hollow composite cylinders, Polymer Composites, vol.6, issue.6, pp.960-966, 2011.
DOI : 10.1002/pc.21114

URL : https://hal.archives-ouvertes.fr/hal-01154415

S. Liang, P. B. Gning, and L. Guillaumat, A comparative study of fatigue behaviour of flax/epoxy and glass/epoxy composites, Composites Science and Technology, vol.72, issue.5, pp.535-543, 2012.
DOI : 10.1016/j.compscitech.2012.01.011

URL : https://hal.archives-ouvertes.fr/hal-00709531

Y. Joliff, W. Rekik, L. Belec, and J. F. Chailan, Study of the moisture/stress effects on glass fibre/epoxy composite and the impact of the interphase area, Composite Structures, vol.108, pp.876-885, 2014.
DOI : 10.1016/j.compstruct.2013.10.001

URL : https://hal.archives-ouvertes.fr/hal-01364361

Y. Joliff, L. Belec, and J. F. Chailan, Modified water diffusion kinetics in an unidirectional glass/fibre composite due to the interphase area: Experimental, analytical and numerical approach, Composite Structures, vol.97, pp.296-303, 2013.
DOI : 10.1016/j.compstruct.2012.09.044

URL : https://hal.archives-ouvertes.fr/hal-01364146

C. Poilâne, Z. E. Cherif, F. Richard, B. B. Vivet, J. Doudou et al., Polymer reinforced by flax fibres as a viscoelastoplastic material, Composite Structures, vol.112, pp.100-112, 2014.
DOI : 10.1016/j.compstruct.2014.01.043