.. Dispositifs-expérimentaux-et-métrologie-associée, 75 3.1.1.1 Dispositif d'impact : Tour de chute, p.76

.. Impact-sur-plaques-préchargées, 90 3.2.1 Matériau de l'étude et échantillons, p.91

.. Matrice-d-'essais, 97 3.2.4 Résultats pour les plaques d'épaisseur de 5 mm (plan d'expériences 2), 100 3.2.4.1 Courbes force vs déplacement, force vs temps et rotation vs temps . . . . . . . . . . . . . . . . . . . 100

. Dans-ce-chapitre, sont présentés les moyens d'essais et d'instrumentation. Les résultats expérimentaux obtenus avec les dispositifs présentés au chapitre précédent sont également décrits et commentés

.. Comparaison-tenue-résiduelle-expérimentale-et-numérique, 155 4.3.2 Présentation du modèle par éléments finis, p.162

T. T. Pham, Caractérisation expérimentale et numérique de la dégradation des réservoirs hyperbares en composite bobiné soumis à des chocs, École doctorale : Sciences et Ingénieur en Matériaux, 2013.

C. Bathias, Matériaux composites, 2009.

L. Liu, B. Zhang, D. Wang, and Z. Wu, Effects of cure cycles on void content and mechanical properties of composite laminates, Composite Structures, vol.73, issue.3, pp.303-309, 2006.
DOI : 10.1016/j.compstruct.2005.02.001

M. Gower, R. Shaw, and B. Broughton, Effect of cure cycle on the properties of thick carbon/epoxy laminates, 17th International Conference on Composite Materials (ICCM-17), 2009.

P. Krawczak, Réservoirs haute pression en composites, 2002.

T. Mitrevski, I. Marshall, R. Thomson, and R. Jones, Low-velocity impacts on preloaded GFRP specimens with various impactor shapes, Composite Structures, vol.76, issue.3, pp.209-217, 2006.
DOI : 10.1016/j.compstruct.2006.06.033

C. Breen, F. Guild, and M. Pavier, Impact damage to thick carbon fibre reinforced plastic composite laminates, Journal of Materials Science, vol.55, issue.20, pp.6718-6724, 2006.
DOI : 10.1007/s10853-006-0208-3

M. D. Robb, W. S. Arnold, and I. Marshall, The damage tolerance of GRP laminates under biaxial prestress, Composite Structures, vol.32, issue.1-4, pp.141-149, 1995.
DOI : 10.1016/0263-8223(95)00077-1

B. Ludovic, Tolérance aux dommages par impacts de structures courbes composites . Éffets d'échelles, 2008.

K. S. Krishnamurthy, P. Mahajan, and R. K. , Impact response and damage in laminated composite cylindrical shells, Composite Structures, vol.59, issue.1, pp.15-36, 2003.
DOI : 10.1016/S0263-8223(02)00238-6

G. Short, F. Guild, and M. Pavier, Post-impact compressive strength of curved GFRP laminates, Composites Part A: Applied Science and Manufacturing, vol.33, issue.11, pp.1487-1495, 2002.
DOI : 10.1016/S1359-835X(02)00175-6

B. Whittingham, I. Marshall, T. Mitrevski, and R. Jones, The response of composite structures with pre-stress subject to low velocity impact damage, Composite Structures, vol.66, issue.1-4, pp.685-698, 2004.
DOI : 10.1016/j.compstruct.2004.06.015

M. Kulkarni, R. Goel, and N. Naik, Effect of back pressure on impact and compression-after-impact characteristics of composites, Composite Structures, vol.93, issue.2, pp.944-951, 2011.
DOI : 10.1016/j.compstruct.2010.06.027

L. Ballère, P. Viot, J. Lataillade, L. Guillaumat, and S. Cloutet, Damage tolerance of impacted curved panels, International Journal of Impact Engineering, vol.36, issue.2, pp.243-253, 2009.
DOI : 10.1016/j.ijimpeng.2008.03.004

E. S. Erdiller, Experimental investigation for mechanical properties of filament wound composite tubes The graduate school of natural and applied sciences od Middle East technical university, 2004.

C. Kaynak, E. Salim-erdiller, L. Parnas, and F. Senel, Use of split-disk tests for the process parameters of filament wound epoxy composite tubes, Polymer Testing, vol.24, issue.5, pp.648-655, 2005.
DOI : 10.1016/j.polymertesting.2005.03.012

E. J. Walsh and D. O. Adams, Development and Evaluation of the Quadrant Ring Test Method, Experimental Mechanics, vol.9, issue.6, pp.319-326, 2007.
DOI : 10.1007/s11340-007-9089-x

J. Kopp, J. Lin, J. Schmittbuhl, and C. Fond, Longitudinal dynamic fracture of polymer pipes, European Journal of Environmental and Civil Engineering, vol.42, 2014.
DOI : 10.1007/BF00017966

C. Bois, A. Pilato, J. Wahl, and N. Perry, Proposal for a smart pressurised ring test to study thick composite produced by filament winding, Composites Part B: Engineering, vol.53, pp.382-390, 2013.
DOI : 10.1016/j.compositesb.2013.06.001
URL : https://hal.archives-ouvertes.fr/hal-00941424

J. Cain, S. Case, and J. Lesko, Testing of Hygrothermally Aged E-Glass/Epoxy Cylindrical Laminates Using a Novel Fixture for Simulating Internal Pressure, Journal of Composites for Construction, vol.13, issue.4, pp.325-331, 2009.
DOI : 10.1061/(ASCE)1090-0268(2009)13:4(325)

A. Onder, O. Sayman, T. Dogan, and N. Tarakcioglu, Burst failure load of composite pressure vessels, Composite Structures, vol.89, issue.1, pp.159-166, 2009.
DOI : 10.1016/j.compstruct.2008.06.021

J. P. Berro-ramirez, Caractérisation et modélisation de l'endommagement des composites bobinés Application à la prédiction de l'éclatement des réservoirs bobinés hyperbares, École doctorale : Sciences et Ingénieur en Matériaux, 2013.

A. Pilato, Caractérisation des structures composites bobinées épaisses, application à l'étude du comportement de réservoirs de stockage d'hydrogène, 2011.

R. Haegege and A. Bunsell, Testing methods for single fibres Fibre reinforcement composite material, pp.501-506, 1988.

P. Olivier, J. Cottu, and B. Ferret, Effects of cure cycle pressure and voids on some mechanical properties of carbon/epoxy laminates, Composites, vol.26, issue.7, pp.509-515, 1995.
DOI : 10.1016/0010-4361(95)96808-J

C. Santulli, R. Gil, A. Long, and M. Clifford, Void Content Measurements in Commingled E-Glass/ Polypropylene Composites Using Image Analysis from Optical Micrographs, Science and Engineering of Composite Materials, vol.10, issue.2, pp.77-90, 2002.
DOI : 10.1515/SECM.2002.10.2.77

Y. Kim, L. Kim, and J. Park, The effect of composite damage on fatigue life of the high pressure vessel for natural gas vehicles, 18th International Conference on Composite Materials (ICCM-18), (Jeju (Korea)), pp.2963-2968, 2011.
DOI : 10.1016/j.compstruct.2011.05.007

D. Cohen, S. C. Mantell, and L. Zhao, The effect of fiber volume fraction on filament wound composite pressure vessel strength, Composites Part B: Engineering, vol.32, issue.5, 2001.
DOI : 10.1016/S1359-8368(01)00009-9

I. Choi, I. Kim, S. Ahn, and C. Yeom, Analytical and experimental studies on the low-velocity impact response and damage of composite laminates under in-plane loads with structural damping effects, Composites Science and Technology, vol.70, issue.10, pp.1513-1522, 2010.
DOI : 10.1016/j.compscitech.2010.05.007

H. Dhakal, Z. Zhang, N. Bennett, and P. Reis, Low-velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites: Influence of impactor geometry and impact velocity, Composite Structures, vol.94, issue.9, pp.2756-2763, 2012.
DOI : 10.1016/j.compstruct.2012.04.004

G. Belingardi and R. Vadori, Influence of the laminate thickness in low velocity impact behavior of composite material plate, Composite Structures, vol.61, issue.1-2, pp.27-38, 2003.
DOI : 10.1016/S0263-8223(03)00027-8

G. Caprino, V. Lopresto, C. Scarponi, and G. Briotti, Influence of material thickness on the response of carbon-fabric/epoxy panels to low velocity impact, Composites Science and Technology, vol.59, issue.15, pp.2279-2286, 1996.
DOI : 10.1016/S0266-3538(99)00079-2

E. Fuoss, P. V. Straznicky, and C. Poon, Effects of staking sequence on the impact resistance in composite laminates-Part 1, Composite structures, vol.8223, issue.98, 1998.

K. Imieli?ska, M. Castaings, R. Wojtyra, J. Haras, E. L. Clezio et al., Air-coupled ultrasonic C-scan technique in impact response testing of carbon fibre and hybrid: glass, carbon and Kevlar/epoxy composites, Journal of Materials Processing Technology, vol.157, issue.158, pp.513-522, 2004.
DOI : 10.1016/j.jmatprotec.2004.07.143

C. Vincent, Étude de l'endommagement de matériaux composites par tomographie X et émission acoustique, 2009.

S. Pickering and D. Almond, Matched excitation energy comparison of the pulse and lock-in thermography NDE techniques, NDT & E International, vol.41, issue.7, pp.501-509, 2008.
DOI : 10.1016/j.ndteint.2008.05.007

W. Harizi, S. Chaki, G. Bourse, and M. Ourak, Caractérisation des méchanismes d'endommagement des matériaux composites à matrice polymère par ultrasons et émission acoustique

. Afnor, Essais non destructifs. L'émission acoustique, mise oeuvre et applications, 1988.

M. Pavier and M. Clarke, Experimental techniques for the investigation of the effects of impact damage on carbon-fibre composites, Composites Science and Technology, vol.55, issue.2, pp.157-169, 1995.
DOI : 10.1016/0266-3538(95)00097-6

S. M. Freeman, Characterisation of laminae and inter laminar damage in graphite/epoxy composites by de-ply technique, ASTM STP, vol.787, pp.50-62, 1982.

S. Chiu, Y. Liou, Y. Chang, and C. Ong, Low velocity impact behavior of prestressed composite laminates, Materials Chemistry and Physics, vol.47, issue.2-3, pp.268-272, 1997.
DOI : 10.1016/S0254-0584(97)80063-6

B. Wardle and P. Lagace, Behavior of Composite Shells Under Transverse Impact and Quasi-Static Loading, AIAA Journal, vol.36, issue.6, pp.1065-1073, 1998.
DOI : 10.2514/2.481

L. Sutherland and C. G. Soares, Effects of laminate thickness and reinforcement type on the impact behaviour of E-glass/polyester laminates, Composites Science and Technology, vol.59, issue.15, pp.2243-2260, 1999.
DOI : 10.1016/S0266-3538(99)00080-9

G. Zhou and G. Davies, Impact response of thick glass fibre reinforced polyester laminates, International Journal of Impact Engineering, vol.16, issue.3, pp.357-374, 1994.
DOI : 10.1016/0734-743X(94)00047-Z

T. Mitrevski, I. Marshall, and R. Thomson, The influence of impactor shape on the damage to composite laminates, Composite Structures, vol.76, issue.1-2, pp.116-122, 2006.
DOI : 10.1016/j.compstruct.2006.06.017

T. Mitrevski, I. Marshall, R. Thomson, R. Jones, and B. Whittingham, The effect of impactor shape on the impact response of composite laminates, Composite Structures, vol.67, issue.2, pp.139-148, 1993.
DOI : 10.1016/j.compstruct.2004.09.007

J. Chen, S. Li, L. Bisby, and J. Ai, FRP rupture strains in the split-disk test, Composites Part B: Engineering, vol.42, issue.4, pp.962-972, 2011.
DOI : 10.1016/j.compositesb.2010.12.015

S. Camara, A. Bunsell, A. Thionnet, and D. Allen, Determination of lifetime probabilities of carbon fibre composite plates and pressure vessels for hydrogen storage, International Journal of Hydrogen Energy, vol.36, issue.10, pp.6031-6038, 2011.
DOI : 10.1016/j.ijhydene.2010.12.069
URL : https://hal.archives-ouvertes.fr/hal-00595889

J. Lamon, Stochastic approach to multiple cracking in composite systems based on the extreme-values theory, Composites Science and Technology, vol.69, issue.10, pp.1607-1614, 2009.
DOI : 10.1016/j.compscitech.2009.03.009

Z. Hashin, Failure Criteria for Unidirectional Fiber Composites, Journal of Applied Mechanics, vol.47, issue.2, pp.329-334, 1980.
DOI : 10.1115/1.3153664

S. Tsai and V. Azzi, Anisotropic strength of composites, Experimental Mechanics, vol.5, pp.283-291, 1965.

S. Tsai and E. Wu, A General Theory of Strength for Anisotropic Materials, Journal of Composite Materials, vol.5, issue.1, pp.58-80, 1971.
DOI : 10.1177/002199837100500106

A. Puck and H. Schürmann, Failure analysis of {FRP} laminates by means of physically based phenomenological models, Composites Science and Technology, vol.62, pp.12-13, 2002.

Z. Hashin and A. Rotem, A Fatigue Failure Criterion for Fiber Reinforced Materials, Journal of Composite Materials, vol.7, issue.4, pp.448-464, 1973.
DOI : 10.1177/002199837300700404

S. Metoui, E. Pruliere, A. Ammar, F. Dau, and I. Iordanoff, The proper generalized decomposition for the simulation of delamination using cohesive zone model, International Journal for Numerical Methods in Engineering, vol.51, issue.4, pp.1000-1022, 2014.
DOI : 10.1002/nme.4732
URL : https://hal.archives-ouvertes.fr/hal-01062894

T. Vandellos, Développement d'une stratégie de modélisation du délaminage dans les structures composites stratifiées, 2011.

J. Charrier, Development of a strength analysis method dedicated to composites structures subjected to out-of-plane loadings, 2013.
URL : https://hal.archives-ouvertes.fr/pastel-00966987

B. Galpin, V. Grolleau, S. Umiastowski, G. Rio, and L. Mahéo, Design and application of an instrumented projectile for load measurements during impact, International Journal of Crashworthiness, vol.13, issue.2, pp.139-148, 2008.
DOI : 10.1016/0951-8339(95)00018-6
URL : https://hal.archives-ouvertes.fr/hal-00400270

S. Umiastowski, Etude du comportement à l'impact basse vitesse d'une tôle de construction navale, 2005.

G. Box and N. Draper, Empirical model-building and response surfaces Wiley series in probability and mathematical statistics : Applied probability and statistics, 1987.

D. Doehlert and V. Klee, Experimental designs through level reduction of the d-dimensional cuboctahedron, Discrete Mathematics, vol.2, issue.4, pp.309-334, 1972.
DOI : 10.1016/0012-365X(72)90011-8

J. Droesbeke, G. Saporta, J. Fine, and S. De-statistique-de-france, Plans d'expériences : applications à l'entreprise, 1997.

D. Benoist, Y. Tourbier, and S. Germain-tourbier, Plan d'expériences : construction et analyse, 1994.

M. Pillet, Les plans d'expériences par la méthode Taguchi. Editions d'Organisation, 1997.

C. Kim, C. Hong, C. Kim, and J. Kim, Optimal design of filament wound type 3 tanks under internal pressure using a modified genetic algorithm, Composite Structures, vol.71, issue.1, pp.16-25, 2005.
DOI : 10.1016/j.compstruct.2004.09.006

V. Herb, G. Couégnat, and E. Martin, Damage assessment of thin SiC/SiC composite plates subjected to quasi-static indentation loading, Composites Part A: Applied Science and Manufacturing, vol.41, issue.11, pp.1677-1685, 2010.
DOI : 10.1016/j.compositesa.2010.08.004

R. K. Mittal, N. M. Panah, S. Khalili, and N. M. Panah, Analysis of fiber reinforced composite plates subjected to transverse impact in the presence of initial stresses, Composite Structures, vol.77, pp.263-268, 2007.

D. Guédra-degeorges, Recent advances to assess mono- and multi-delaminations behaviour of aerospace composites, Composites Science and Technology, vol.66, issue.6, pp.796-806, 2006.
DOI : 10.1016/j.compscitech.2004.12.041