A. Jebai, P. Combes, F. Malrait, P. Martin, and P. Rouchon, Energy-based modeling of electric motors, 53rd IEEE Conference on Decision and Control, pp.6009-6016, 2014.
DOI : 10.1109/CDC.2014.7040330

P. Brandstetter, P. Bilek, J. Szotkowski, and P. Vaculik, Sensorless control of asynchronous motor using voltage signal injection, Progress in Electromagnetics Research Symposium (PIERS), pp.1421-1425, 2011.

T. Wolbank, H. Giuliani, and R. Woehrnschimmel, High Dynamic Sensorless Control of Induction Machines at Zero Speed Using Transient Excitation Technique, IEEE 36th Conference on Power Electronics Specialists, 2005., pp.2456-2461, 2005.
DOI : 10.1109/PESC.2005.1581977

Y. Yoon and S. Sul, Sensorless control for Induction Machines based on squarewave voltage injection, IEEE Transactions on, vol.29, pp.3637-3645, 2014.

K. and M. For, Synchronous Reluctance Motor KSB SuPremE A

L. Somer and C. For, Moteurs asynchrones triphasés fermés, carter alliage d'aluminium

J. Lakemeier, A. Tenge, and F. Wishmeier-for-dspace-gmbh, User guide for " dSpace AC motor control solution, 2011.

S. Electric and C. For, Variable Speed Drives Altivar 71

P. Combes, A. Jebai, F. Malrait, P. Martin, and P. Rouchon, Adding virtual measurements by HF signal injection, ACC), 2016.

A. R. Weber and G. Steiner, An accurate identification and compensation method for nonlinear inverter characteristics for ac motor drives, 2012 IEEE International Instrumentation and Measurement Technology Conference Proceedings, pp.821-826, 2012.
DOI : 10.1109/I2MTC.2012.6229666

F. Gabriel and F. De-belie, Compensating the influence of the stator resistor and inverter nonlinearities in signal-injection based sensorless strategies, 2009 IEEE Vehicle Power and Propulsion Conference, pp.249-256, 2009.
DOI : 10.1109/VPPC.2009.5289838

J. M. Guerrero, M. Leetmaa, F. Briz, A. Zamarró, and L. R. , Inverter Nonlinearity Effects in High-Frequency Signal-Injection-Based Sensorless Control Methods, IEEE Transactions on Industry Applications, vol.41, issue.2, pp.618-626, 2005.
DOI : 10.1109/TIA.2005.844411

T. M. Wolbank and J. L. , Influence of inverter-nonlinearity and measurement setup on zero speed sensorless control of AC machines based on voltage pulse injection, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005., pp.1568-1573, 2005.
DOI : 10.1109/IECON.2005.1569138

F. Malrait, Probì emes d'identification et d'observabilité du moteuràmoteurà induction pour la variation de vitesse industrielle " sans capteur, 2001.

J. A. Melkebeek and D. Novotny, The Influence of Saturation on Induction Machine Drive Dynamics, IA-19, pp.671-681, 1983.
DOI : 10.1109/TIA.1983.4504275

J. Ojo, A. Consoli, and T. Lipo, An improved model of saturated induction machines, IEEE Transactions on Industry Applications, vol.26, issue.2, pp.212-221, 1990.
DOI : 10.1109/28.54245

C. Sullivan and S. Sanders, Models for induction machines with magnetic saturation of the main flux path, IEEE Transactions on Industry Applications, vol.31, issue.4, pp.907-917, 1995.
DOI : 10.1109/28.395303

F. Briz, M. Degner, A. Diez, and R. Lorenz, Measuring, modeling, and decoupling of saturation-induced saliencies in carrier-signal injection-based sensorless AC drives, IEEE Transactions on Industry Applications, vol.37, issue.5, pp.1356-1364, 2001.
DOI : 10.1109/28.952511

S. Sul, Control of electric machine drive systems, 2011.
DOI : 10.1002/9780470876541

N. Bianchi and S. Bolognani, Design techniques for reducing the cogging torque in surface-mounted PM motors, IEEE Transactions on Industry Applications, vol.38, issue.5, pp.1259-1265, 2002.
DOI : 10.1109/TIA.2002.802989

V. Petrovic, R. Ortega, A. Stankovic, and G. Tadmor, Design and implementation of an adaptive controller for torque ripple minimization in PM synchronous motors, IEEE Transactions on Power Electronics, vol.15, issue.5, pp.871-880, 2000.
DOI : 10.1109/63.867676

Z. Zhu and D. Howe, Analytical prediction of the cogging torque in radial-field permanent magnet brushless motors, IEEE Transactions on Magnetics, vol.28, issue.2, pp.1371-1374, 1992.
DOI : 10.1109/20.123947

M. Degner and R. Lorenz, Position estimation in induction machines utilizing rotor bar slot harmonics and carrier-frequency signal injection, IEEE Transactions on Industry Applications, vol.36, issue.3, pp.736-742, 2000.
DOI : 10.1109/28.845048

N. Teske, G. Asher, M. Sumner, and K. Bradley, Encoderless position estimation for symmetric cage induction machines under loaded conditions, IEEE Transactions on Industry Applications, vol.37, issue.6, pp.1793-1800, 2001.
DOI : 10.1109/28.968193

J. Melkebeek and J. Willems, Reciprocity relations for the mutual inductances between orthogonal axis windings in saturated salient-pole machines, IEEE Transactions on Industry Applications, vol.26, issue.1, pp.107-114, 1990.
DOI : 10.1109/28.52681

P. Sauer, Constraints on saturation modeling in AC machines " , Energy Conversion, IEEE Transactions on, vol.7, pp.161-167, 1992.

J. M. Raimond, Mécanique analytique

D. C. White and H. H. Woodson, Electromechanical energy conversion, 1958.

I. Boldea and S. A. Nassar, The induction machine handbook, 2001.
DOI : 10.1201/9781420042658

D. Basic, F. Malrait, and P. Rouchon, Euler-Lagrange Models With Complex Currents of Three-Phase Electrical Machines and Observability Issues, IEEE Transactions on Automatic Control, vol.55, issue.1, pp.212-217, 2010.
DOI : 10.1109/TAC.2009.2033873
URL : https://hal.archives-ouvertes.fr/hal-00475765

D. Basic, A. Jebai, F. Malrait, P. Martin, and P. Rouchon, Using Hamiltonians to Model Saturation in Space Vector Representations of AC Electrical Machines, Advances in the Theory of Control, Signals and Systems with Physical Modeling, pp.41-48, 2011.
DOI : 10.1007/978-3-642-16135-3_4
URL : https://hal.archives-ouvertes.fr/hal-00555560

A. Jebai, Low speed sensorless synchronous motor control, 2013.

C. Gerada, K. Bradley, M. Sumner, and P. Sewell, Evaluation and Modeling of Cross Saturation Due to Leakage Flux in Vector-Controlled Induction Machines, IEEE Transactions on Industry Applications, vol.43, issue.3, pp.694-702, 2007.
DOI : 10.1109/TIA.2007.895741

H. R. Fudeh and C. M. Ong, Modeling and analysis of induction machines containing space harmonics. 1: Modeling and Transformation, Power Apparatus and Systems IEEE Transactions on, vol.102, pp.2608-2615, 1983.

J. F. Gieras, Analysis of multilayer rotor induction motor with higher space harmonics taken into account, Electric Power Applications, pp.59-67, 1991.
DOI : 10.1049/ip-b.1991.0008

P. Vas, Beitrag zur allgemeinen Theorie elektrischer Maschinen: Wirkung der Raumharmonik in umgewandelten Gleichungen von Drehstrom- und Zweiphasen-Asynchronmaschinen, Archiv f??r Elektrotechnik, vol.112, issue.3, pp.125-133, 1983.
DOI : 10.1007/BF01578419

J. Ha, S. Sul, K. Ide, I. Murokita, and K. Sawamura, Physical understanding of high frequency injection method to sensorless drives of an induction machine, 35th IAS Annual Meeting and Wolrd Conference on Industrial Applications of Electrical Energy, pp.1802-1808, 2000.

A. Jebai, F. Malrait, P. Martin, and P. Rouchon, Signal injection and averaging for position estimation of Permanent-Magnet Synchronous Motors, 2012 IEEE 51st IEEE Conference on Decision and Control (CDC), pp.7608-7613, 2012.
DOI : 10.1109/CDC.2012.6426887
URL : https://hal.archives-ouvertes.fr/hal-00787794

F. M. De-belie and J. A. Melkebeek, A nonlinear model for synchronous machines to describe high-frequency signal based position estimators, IEEE International Conference on Electric Machines and Drives, 2005., pp.696-703, 2005.
DOI : 10.1109/IEMDC.2005.195799

J. Chiasson, Modeling and high performance control of electric machines, 2005.
DOI : 10.1002/0471722359

M. Hinkkanen, A. Repo, M. Ranta, and J. Luomi, Small-Signal Modeling of Mutual Saturation in Induction Machines, IEEE Transactions on Industry Applications, vol.46, issue.3, pp.965-973, 2010.
DOI : 10.1109/TIA.2010.2046290

J. Sanders, F. Verhulst, and J. Murdock, Averaging methods in nonlinear dynamical systems, 2005.
DOI : 10.1007/978-1-4757-4575-7

P. Vaclavek and P. Blaha, Synchronous Machine drive observability analysis for sensorless control design, Control Applications, IEEE International Conference on, pp.1113-1117, 2007.

E. Capecchi, P. Guglielmi, M. Pastorelli, and A. Vagati, Position-sensorless control of the transverse-laminated synchronous reluctance motor, IEEE Transactions on Industry Applications, vol.37, issue.6, pp.1768-1776, 2001.
DOI : 10.1109/28.968190

G. Bottiglieri, G. Scelba, G. Scarcella, A. Testa, and A. Consoli, Sensorless speed estimation in induction motor drives, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03., pp.624-630, 2003.
DOI : 10.1109/IEMDC.2003.1211327

A. Consoli, G. Bottiglieri, G. Scarcella, and G. Scelba, Flux and Voltage Calculations of Induction Motors Supplied by Low- and High-Frequency Currents, IEEE Transactions on Industry Applications, vol.45, issue.2, pp.737-746, 2009.
DOI : 10.1109/TIA.2009.2013568

C. Rudolph, T. Laczynski, and B. Orlik, Sensorless field oriented control of induction motors considering main flux saturation effects on test signal injection, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551), pp.2306-2312, 2004.
DOI : 10.1109/PESC.2004.1355481

J. Holtz, Sensorless Control of Induction Machines—With or Without Signal Injection?, IEEE Transactions on Industrial Electronics, vol.53, issue.1, pp.7-30, 2006.
DOI : 10.1109/TIE.2005.862324

M. Hinkkanen, V. Leppänen, and J. Luomi, Flux Observer Enhanced With Low-Frequency Signal Injection Allowing Sensorless Zero-Frequency Operation of Induction Motors, IEEE Transactions on Industry Applications, vol.41, issue.1, pp.52-59, 2005.
DOI : 10.1109/TIA.2004.840958

Y. Li and S. Wu, A new method of speed-sensorless control of induction motor at very low speed, 2009 8th International Symposium on Advanced Electromechanical Motion Systems & Electric Drives Joint Symposium, 2009.
DOI : 10.1109/ELECTROMOTION.2009.5259077

P. Krause, O. Wasynczuk, and S. Sudhoff, Analysis of electrical machinery and drive systems, 2002.

J. Ha and S. Sul, Sensorless field-orientation control of an induction machine by high-frequency signal injection, Industry Applications IEEE Transactions on, vol.35, pp.45-51, 1999.

G. Bottiglieri, A. Consoli, G. Scarcella, and G. Scelba, Zero-sequence Flux and Voltage of Induction Motors Supplied with Low-and High-frequency Currents, 2007 IEEE International Electric Machines & Drives Conference, pp.1201-1207, 2007.
DOI : 10.1109/IEMDC.2007.383601

H. K. Khalil, Nonlinear systems, 2002.

W. Lohmiller and J. E. Slotine, On Contraction Analysis for Non-linear Systems, Automatica, vol.34, issue.6, pp.683-696, 1998.
DOI : 10.1016/S0005-1098(98)00019-3

A. Kilthau and J. Pacas, Appropriate models for the control of the synchronous reluctance machine, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344), pp.2289-2295, 2002.
DOI : 10.1109/IAS.2002.1042765

G. Stumberger, B. Stumberger, D. Dolinar, and A. Hamler, Cross magnetization effect on inductances of linear synchronous reluctance motor under load conditions, IEEE Transactions on Magnetics, vol.37, issue.5, pp.3658-3662, 2001.
DOI : 10.1109/20.952684

A. Vagati, M. Pastorelli, F. Scapino, and G. Franceschini, Impact of cross saturation in synchronous reluctance motors of the transverse-laminated type, IEEE Transactions on Industry Applications, vol.36, issue.4, pp.1039-1046, 2000.
DOI : 10.1109/28.855958

Z. Qu, T. Tuovinen, and M. Hinkkanen, Inclusion of magnetic saturation in dynamic models of synchronous reluctance motors, 2012 XXth International Conference on Electrical Machines, pp.994-1000, 2012.
DOI : 10.1109/ICElMach.2012.6349997

A. Ganji, P. Guillaume, R. Pintelon, and P. Lataire, Induction motor dynamic and static inductance identification using a broadband excitation technique, IEEE Transactions on Energy Conversion, vol.13, issue.1, pp.15-20, 1998.
DOI : 10.1109/60.658198

T. Vyncke and F. M. De-belie, A Simulink state-space model of induction machines including magnetizing-flux saturation, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006., pp.1453-1458, 2006.
DOI : 10.1109/SPEEDAM.2006.1649997

M. Ranta, Dynamic induction machine models including magnetic saturation and iron losses, 2013.

T. Lipo and A. Consoli, Modeling and Simulation of Induction Motors with Saturable Leakage Reactances, IEEE Transactions on Industry Applications, vol.20, issue.1, pp.180-189, 1984.
DOI : 10.1109/TIA.1984.4504392

T. Tuovinen, M. Hinkkanen, and J. Luomi, Modeling of Saturation Due to Main and Leakage Flux Interaction in Induction Machines, IEEE Transactions on Industry Applications, vol.46, issue.3, pp.937-945, 2010.
DOI : 10.1109/TIA.2010.2045210

S. D. Sudhoff, D. C. Aliprantis, B. T. Kuhn, and P. L. Chapman, An induction machine model for predicting inverter-machine interaction " , Energy Conversion, IEEE Transactions on, vol.17, pp.203-210, 2002.

S. D. Sudhoff, B. T. Kuhn, P. L. Chapman, and D. C. Aliprantis, Experimental characterization procedure for use with an advanced induction machine model " , Energy Conversion, IEEE Transactions on, vol.18, pp.48-56, 2003.

J. Cordier, P. Landsmann, and R. Kennel, The influence of magnetic hysteresis on HF injection based inductance calculation, 2011 IEEE Energy Conversion Congress and Exposition, pp.638-645, 2011.
DOI : 10.1109/ECCE.2011.6063829

Y. O. Amor, ContributionàContributionà la modélisation de l'hystérésis magnétique en vue de l'analyse parélémentsparéléments finis des systémes de chauffage par induction, 2000.

P. Kis, Jiles-Atherton model implementation to edge finite element method, 2006.

Y. Troxler, A Simple Model for Magnetic Hysteresis and Saturation in a PMSM, 2011.

P. Jansen and R. Lorenz, Transducerless field orientation concepts employing saturation-induced saliencies in induction machines, IEEE Transactions on Industry Applications, vol.32, issue.6, pp.1380-1393, 1996.
DOI : 10.1109/28.556642

R. Lagerquist, I. Boldea, and T. J. Miller, Sensorless-control of the synchronous reluctance motor, IEEE Transactions on Industry Applications, vol.30, issue.3, pp.673-682, 1994.
DOI : 10.1109/28.293716

K. Malekian, M. Sharif, and J. Milimonfared, An optimal current vector control for synchronous reluctance motors incorporating field weakening, 2008 10th IEEE International Workshop on Advanced Motion Control, pp.393-398, 2008.
DOI : 10.1109/AMC.2008.4516099

M. Meyer and J. Bocker, Optimum control for Interior Permanent Magnet Synchronous Motors (IPMSM) in constant torque and flux weakening range, 12th International Conference on, pp.282-286, 2006.

P. Guglielmi, M. Pastorelli, G. Pellegrino, and A. Vagati, Position-Sensorless Control of Permanent-Magnet-Assisted Synchronous Reluctance Motor, IEEE Transactions on Industry Applications, vol.40, issue.2, pp.615-622, 2004.
DOI : 10.1109/TIA.2004.824438

D. Dreven?ek, D. Zarko, and T. Lipo, A Study of Sensorless Control of Induction Motor at Zero Speed Utilizing High Frequency Voltage Injection, EPE Journal, vol.13, issue.3, pp.7-11, 2003.
DOI : 10.1080/09398368.2003.11463534

M. Corley and R. Lorenz, Rotor position and velocity estimation for a permanent magnet synchronous machine at standstill and high speeds, 31th IAS Annual Meeting and World Conference on Industry Applications, pp.36-41, 1996.