M. Prot, D. Saletti, S. Pattofatto, V. Bousson, and S. Laporte, Links between mechanical behavior of cancellous bone and its microstructural properties under dynamic loading, Journal of Biomechanics, vol.48, issue.3, pp.498-503, 2015.
DOI : 10.1016/j.jbiomech.2014.12.002

M. Articles-proposés, T. J. Prot, D. Cloete, S. Saletti, and . Laporte, The behavior of cancellous bone from quasistatic to dynamic strain rates with emphasis on the intermediate regime

M. Prot, T. J. Cloete, D. Saletti, and S. Laporte, The behavior of cancellous bone from quasi-static to dynamic strain rates with emphasis on the intermediate regime, Journal of Biomechanics, vol.49, issue.7
DOI : 10.1016/j.jbiomech.2016.02.021

M. Prot and T. J. Cloete, Design of a tandem momentum trap adapted for compressive Split Hopkinson Pressure Bar : application to dynamic recovery of cancellous bone, En cours de soumission à Journal of Dynamic Behavior of Materials

D. Saletti, S. Pattofatto, V. Bousson, and S. Laporte, Links between microstructural properties of cancellous bone and its mechanical response to different strain rates, Conférences avec actes et comité de lecture 8.3.1. Suppléments issus de conférences M. Prot, 2012.

M. Prot, T. J. Cloete, D. Saletti, and S. Laporte, Intermediate strain rate behavior of cancellous bone : from the lower to the higher strain rate, Computer Methods Biomechanics and Biomedical Engineering, vol.17, 2014.

M. Prot, G. Dubois, T. J. Cloete, D. Saletti, and S. Laporte, Fracture characterization in cancellous bone specimens via surface difference evaluation of 3D registered pre-and postcompression micro-CT scans, Computer Methods Biomechanics and Biomedical Engineering, 2015.

T. J. Prot, S. Cloete, and . Pattofatto, Dynamic compression and recovery of cancellous bone for microstructural investigation, EPJ Web of Conferences, vol.26, issue.2, p.3003, 2012.
DOI : 10.1051/epjconf/20122603003

. Doi, Communication orale, DYMAT (10th conference of the european association for research into the DYnamic behaviour of MATerials, p.2012

M. Prot, T. J. Cloete, D. Saletti, and S. Laporte, Intermediate strain rate behaviour of cancellous bone: Links between microstructural and mechanical properties, EPJ Web of Conferences, vol.94, 2015.
DOI : 10.1051/epjconf/20159403006

. Doi, Communication orale, DYMAT (11th conference of the european association for research into the DYnamic behaviour of MATerials, p.2015

M. Prot, T. J. Cloete, D. Saletti, and S. Laporte, A robust method to identify cancellous bone behaviour : from the quasi-static to intermediate and dynamic strain rates, Communication orale, ISB (25th Congress of the International Society of Biomechanics, p.2015, 2015.

M. Prot, T. J. Cloete, D. Saletti, and S. Laporte, Microstructure of cancellous bone as a strength predictor for a wide range of strain rates, Communication orale et bourse de voyage, AAAM (59th Conference of the Association for the Advancement of Automotive Medicine, p.2015, 2015.

G. Dubois, M. Prot, T. J. Cloete, and S. Laporte, What is the good size of Volume of Interest in Cancellous Bone ? A skeleton based study, Computer Methods Biomechanics and Biomedical Engineering, pp.1-2, 2015.

G. Dubois, M. Prot, A. Roux, T. J. Cloete, and S. Laporte, Cancellous Bone Model using Discrete Element Method : A Feasibility Study, 2015.

R. Akhtar, M. Daymond, J. Almer, and P. Et-mummery, Elastic strains in antler trabecular bone determined by synchrotron X-ray diffraction, Acta Biomaterialia, vol.4, issue.6, pp.1677-1687, 2008.
DOI : 10.1016/j.actbio.2008.05.008

J. Alves, W. Xu, D. Lin, R. Siffert, J. Ryaby et al., Ultrasonic assessment of human and bovine trabecular bone: a comparison study, IEEE Transactions on Biomedical Engineering, vol.43, issue.3, pp.43249-258, 1996.
DOI : 10.1109/10.486282

R. Andersen, Modern methods for robust regression, 2008.
DOI : 10.4135/9781412985109

I. A. Anderson and J. B. Et-carman, How do changes to plate thickness, length, and face-connectivity affect femoral cancellous bone's density and surface area? An investigation using regular cellular models, Journal of Biomechanics, vol.33, issue.3, pp.327-335, 2000.
DOI : 10.1016/S0021-9290(99)00200-6

D. Andre, J. Charles, I. Iordanoff, and J. Et-néauport, The granoo workbench, a new tool for developing discrete element simulations, and its application to tribological problems Advances in Engineering Software, pp.40-48, 2014.

D. André, I. Iordanoff, J. Charles, and J. Et-néauport, Discrete element method to simulate continuous material by using the cohesive beam model, Computer Methods in Applied Mechanics and Engineering, vol.213, issue.216, pp.113-125, 2012.
DOI : 10.1016/j.cma.2011.12.002

P. Arbenz and C. Et-flaig, On smoothing surfaces in voxel based finite element analysis of trabecular bone. Large-Scale Scientific Computing, pp.69-77, 2008.

A. Barbas, Etude biomécanique de substituts osseux en titane poreux destinés à la chirurgie maxillo-faciale, 2011.

A. Bekker, T. Cloete, A. Chinsamy-turan, G. Nurick, and S. Et-kok, Constant strain rate compression of bovine cortical bone on the Split-Hopkinson Pressure Bar, Materials Science and Engineering: C, vol.46, pp.443-449, 2015.
DOI : 10.1016/j.msec.2014.10.071

A. Benoit, S. Guérard, B. Gillet, G. Guillot, F. Hild et al., 3D analysis from micro-MRI during in situ compression on cancellous bone, Journal of Biomechanics, vol.42, issue.14, pp.422381-2386, 2009.
DOI : 10.1016/j.jbiomech.2009.06.034
URL : https://hal.archives-ouvertes.fr/hal-00410326

C. Bergot and J. Et-bocquet, Etude syst??matique, en fonction de l'??ge, de l'os spongieux et de l'os cortical de l'hum??rus et du f??mur, Bulletins et M??moires de la Soci??t?? d'anthropologie de Paris, vol.3, issue.3, pp.215-242, 1976.
DOI : 10.3406/bmsap.1976.1852

G. Bevill, S. Eswaran, A. Gupta, P. Papadopoulos, and T. Et-keaveny, Influence of bone volume fraction and architecture on computed large-deformation failure mechanisms in human trabecular bone, Bone, vol.39, issue.6, pp.391218-1225, 2006.
DOI : 10.1016/j.bone.2006.06.016

F. Bini, A. Marinozzi, F. Marinozzi, and F. Et-patanè, Microtensile measurements of single trabeculae stiffness in human femur, Journal of Biomechanics, vol.35, issue.11, pp.1515-1519, 2002.
DOI : 10.1016/S0021-9290(02)00182-3

D. Birkenhäger-frenkel, P. Courpron, E. Hüpscher, E. Clermonts, M. Coutinho et al., Age-related changes in cancellous bone structure. a two-dimensional study in the transiliac and iliac crest biopsy sites, Bone and mineral, vol.4, issue.2, p.197, 1988.

I. Bloch, Reconstruction d'images de tomographie

N. Bonneau, P. Libourel, C. Simonis, L. Puymerail, M. Baylac et al., A three-dimensional axis for the study of femoral neck orientation, Journal of Anatomy, vol.37, issue.5, pp.465-476, 2012.
DOI : 10.1111/j.1469-7580.2012.01565.x
URL : https://hal.archives-ouvertes.fr/halshs-00848972

S. Boruah, K. Henderson, D. Subit, R. Salzar, B. Shender et al., Response of human skull bone to dynamic compressive loading, IRCOBI Conference, 2013.

S. Boutroy, M. L. Bouxsein, F. Munoz, and P. D. Et-delmas, In vivo assessment of trabecular bone microarchitecture by high-resolution peripheral quantitative computed tomography, Journal of Clinical Endocrinology & Metabolism, issue.12, pp.906508-6515, 2005.

S. Bowman, T. Keaveny, L. Gibson, W. Hayes, and T. Et-mcmahon, Compressive creep behavior of bovine trabecular bone, Journal of Biomechanics, vol.27, issue.3, pp.301-310, 1994.
DOI : 10.1016/0021-9290(94)90006-X

K. Brear, J. Currey, S. Raines, and K. Et-smith, Density and Temperature Effects on Some Mechanical Properties of Cancellous Bone, Engineering in Medicine, vol.21, issue.4, pp.163-167, 1988.
DOI : 10.1243/EMED_JOUR_1988_017_043_02

T. D. Brown and A. B. Et-ferguson, Mechanical Property Distributions in the Cancellous Bone of the Human Proximal Femur, Acta Orthopaedica Scandinavica, vol.7, issue.1-6, pp.429-437, 1980.
DOI : 10.3109/17453678008990819

J. Broz, S. Simske, A. Greenberg, and M. Luttges, Effects of Rehydration State on the Flexural Properties of Whole Mouse Long Bones, Journal of Biomechanical Engineering, vol.115, issue.4A, p.115447, 1993.
DOI : 10.1115/1.2895510

K. Bruyère, Caractérisation et modélisation mécanique de l'os spongieux humain en relation avec ses propriétés structurales et architecturales, 2000.

D. B. Burr and M. R. Et-allen, Basic and applied bone biology, 2013.

B. Busse, M. Hahn, M. Soltau, J. Zustin, K. Püschel et al., Increased calcium content and inhomogeneity of mineralization render bone toughness in osteoporosis: Mineralization, morphology and biomechanics of human single trabeculae, Bone, vol.45, issue.6, pp.451034-1043, 2009.
DOI : 10.1016/j.bone.2009.08.002

H. Butt, P. Xue, T. Jiang, and B. Et-wang, Parametric identification for material of viscoelastic SHPB from wave propagation data incorporating geometrical effects, International Journal of Mechanical Sciences, vol.91, pp.46-54, 2015.
DOI : 10.1016/j.ijmecsci.2014.06.003

R. Carn, Your personal hip surgery guide and workbook, 2009.

R. Carretta, B. Luisier, D. Bernoulli, E. Stüssi, R. Müller et al., Novel method to analyze post-yield mechanical properties at trabecular bone tissue level, Journal of the Mechanical Behavior of Biomedical Materials, vol.20, pp.6-18, 2013.
DOI : 10.1016/j.jmbbm.2012.12.003

D. Carter and W. Hayes, The compressive behavior of bone as a two-phase porous structure, The Journal of Bone & Joint Surgery, vol.59, issue.7, 1977.
DOI : 10.2106/00004623-197759070-00021

E. Cendre, D. Mitton, J. Roux, M. Arlot, F. Duboeuf et al., High-Resolution Computed Tomography for Architectural Characterization of Human Lumbar Cancellous Bone: Relationships with Histomorphometry and Biomechanics, Osteoporosis International, vol.10, issue.5, pp.353-360, 1999.
DOI : 10.1007/s001980050240

F. Chaari, E. Markiewicz, and P. Et-drazetic, Identification of the spongy bone mechanical behavior under compression loads: numerical simulation versus experimental results, International Journal of Crashworthiness, vol.6, issue.3, pp.247-253, 2007.
DOI : 10.1016/S0021-9290(99)00115-3

D. Chappard, M. Baslé, E. Legrand, and M. Et-audran, Trabecular bone microarchitecture: A review, Morphologie, vol.92, issue.299, pp.92162-170, 2008.
DOI : 10.1016/j.morpho.2008.10.003

D. Chappard, E. Legrand, B. Haettich, G. Chalès, B. Auvinet et al., Fractal dimension of trabecular bone: comparison of three histomorphometric computed techniques for measuring the architectural two-dimensional complexity, The Journal of Pathology, vol.14, issue.4, pp.515-521, 2001.
DOI : 10.1002/path.970

M. Charlebois, C. Haunschmid, and P. K. Et-zysset, CONFINED AND UNCONFINED COMPRESSION TESTS OF HUMAN TRABECULAR BONE UP TO VERY LARGE STRAINS, Journal of Biomechanics, vol.41, pp.48-48, 2008.
DOI : 10.1016/S0021-9290(08)70048-4

E. Charpail, Analyse du comportement mécanique des côtes humaines en dynamique, 2006.

P. Chen and J. Et-mckittrick, Compressive mechanical properties of demineralized and deproteinized cancellous bone, Journal of the Mechanical Behavior of Biomedical Materials, vol.4, issue.7, pp.961-973, 2011.
DOI : 10.1016/j.jmbbm.2011.02.006

Y. Chevalier, D. Pahr, H. Allmer, M. Charlebois, and P. Et-zysset, Validation of a voxel-based FE method for prediction of the uniaxial apparent modulus of human trabecular bone using macroscopic mechanical tests and nanoindentation, Journal of Biomechanics, vol.40, issue.15, pp.403333-3340, 2007.
DOI : 10.1016/j.jbiomech.2007.05.004

S. Chocron, D. Nicolella, A. Nicholls, T. Bredbenner, and L. Et-havill, Dynamic testing of old and young baboon cortical bone with numerical validation, EPJ Web of Conferences, p.3004, 2012.
DOI : 10.1051/epjconf/20122603004

K. Choi and S. Et-goldstein, A comparison of the fatigue behavior of human trabecular and cortical bone tissue, Journal of Biomechanics, vol.25, issue.12, pp.1371-1381, 1992.
DOI : 10.1016/0021-9290(92)90051-2

K. Choi, J. Kuhn, M. Ciarelli, and S. Et-goldstein, The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus, Journal of Biomechanics, vol.23, issue.11, pp.1103-1113, 1990.
DOI : 10.1016/0021-9290(90)90003-L

T. Cloete, G. Paul, and E. Et-ismail, Hopkinson bar techniques for the intermediate strain rate testing of bovine cortical bone, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.32, issue.4, p.37220130210, 2014.
DOI : 10.1016/j.actbio.2010.04.017

B. Courtin, A. Perault, and J. Et-staub, A reaction-diffusion model for trabecular architecture of embryonic periosteal long bone, Complexity International, vol.4, pp.1-17, 1997.

S. Cowin, The relationship between the elasticity tensor and the fabric tensor, Mechanics of Materials, vol.4, issue.2, pp.137-147, 1985.
DOI : 10.1016/0167-6636(85)90012-2

S. C. Cowin, Bone mechanics handbook, 2001.

P. A. Cundall and O. D. Et-strack, A discrete numerical model for granular assemblies, G??otechnique, vol.29, issue.1, 1979.
DOI : 10.1680/geot.1979.29.1.47

R. Curry, T. Cloete, and R. Et-govender, Implementation of viscoelastic Hopkinson bars, EPJ Web of Conferences, p.1044, 2012.
DOI : 10.1051/epjconf/20122601044

D. Dagan, M. Beery, and A. Et-gefen, Single-trabecula building block for large-scale finite element models of cancellous bone, Medical & Biological Engineering & Computing, vol.18, issue.4, pp.549-556, 2004.
DOI : 10.1007/BF02350998

F. David, Comportement mécanique de l'os spongieux à très grande vitesse de déformation, 2008.

J. Day, M. Ding, A. Odgaard, D. Sumner, I. Hvid et al., Parallel plate model for trabecular bone exhibits volume fraction-dependent bias, Bone, vol.27, issue.5, pp.27715-720, 2000.
DOI : 10.1016/S8756-3282(00)00371-9

R. Delille, Contribution à la compréhension du comportement mécanique de l'os du crâne humain sous différents moyens de conservation et de sollicitation, 2007.

I. Diamant, R. Shahar, and A. Et-gefen, How to select the elastic modulus for cancellous bone in patient-specific continuum models of the spine, Medical & Biological Engineering & Computing, vol.18, issue.4, pp.465-472, 2005.
DOI : 10.1007/BF02344727

M. Dimassi, Modélisation de la structure poreuse du non-tissé par des techniques de calcul avancé, 2009.

F. Donaldson, P. Pankaj, A. Law, and A. Et-simpson, Virtual trabecular bone models and their mechanical response, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol.222, issue.8, pp.1185-1195, 2008.
DOI : 10.1243/09544119JEIM408

X. Dong, Y. Yeni, C. Les, and D. Et-fyhrie, Effects of end boundary conditions and specimen geometry on the viscoelastic properties of cancellous bone measured by dynamic mechanical analysis, Journal of Biomedical Materials Research, vol.194, issue.3, pp.68573-583, 2004.
DOI : 10.1002/jbm.a.20108

C. Dreux and P. Et-delmas, Les méthodes de mesure de la densité minérale osseuse (dmo) et des marqueurs du remodelage osseux dans le dépistage de l'ostéoporose, pp.1851561-1580, 2001.

B. Efron and R. J. Et-tibshirani, An introduction to the bootstrap, 1994.
DOI : 10.1007/978-1-4899-4541-9

A. G. Evans, J. Hutchinson, and M. Et-ashby, Multifunctionality of cellular metal systems, Progress in Materials Science, vol.43, issue.3, pp.171-221, 1998.
DOI : 10.1016/S0079-6425(98)00004-8

F. G. Evans and M. Et-lebow, Regional differences in some of the physical properties of the human femur, Journal of applied physiology, vol.3, issue.9, pp.563-572, 1951.

R. Fajardo and R. Et-müller, Three-dimensional analysis of nonhuman primate trabecular architecture using micro-computed tomography, American Journal of Physical Anthropology, vol.118, issue.Suppl, pp.327-336, 2001.
DOI : 10.1002/ajpa.1089

N. Fazzalari, D. Crisp, and B. Et-vernon-roberts, Mathematical modelling of trabecular bone structure: The evaluation of analytical and quantified surface to volume relationships in the femoral head and iliac crest, Journal of Biomechanics, vol.22, issue.8-9, pp.8-9901, 1989.
DOI : 10.1016/0021-9290(89)90074-2

R. A. Fisher, On the mathematical foundations of theoretical statistics, Containing Papers of a Mathematical or Physical Character, pp.309-368, 1922.

H. Follet, Caractérisation biomécanique et modélisation 3D par imagerie X et IRM haute résolution de l'os spongieux humain : évaluation du risque fracturaire, 2002.

H. Follet, S. Viguet-carrin, B. Burt-pichat, B. Dépalle, Y. Bala et al., Effects of preexisting microdamage, collagen cross-links, degree of mineralization, age, and architecture on compressive mechanical properties of elderly human vertebral trabecular bone, Journal of Orthopaedic Research, vol.17, issue.4, pp.481-488, 2011.
DOI : 10.1002/jor.21275
URL : https://hal.archives-ouvertes.fr/inserm-00557212

P. Forquin, A. Arias, and R. Et-zaera, An experimental method of measuring the confined compression strength of geomaterials, International Journal of Solids and Structures, vol.44, issue.13, pp.4291-4317, 2007.
DOI : 10.1016/j.ijsolstr.2006.11.022

P. Forquin, G. Gary, and F. Et-gatuingt, A testing technique for concrete under confinement at high rates of strain, International Journal of Impact Engineering, vol.35, issue.6, pp.425-446, 2008.
DOI : 10.1016/j.ijimpeng.2007.04.007
URL : https://hal.archives-ouvertes.fr/hal-00994320

E. Fox, Changing the status-quo of osteoporosis screening and treatment, 2013.

E. Garboczi, K. Snyder, J. Douglas, and M. Et-thorpe, Geometrical percolation threshold of overlapping ellipsoids, Physical Review E, vol.52, issue.1, p.819, 1995.
DOI : 10.1103/PhysRevE.52.819

A. Garo, Modélisation du corps vertébral en chargement dynamique : intégration de l'effet de l'âge, 2011.

N. Garrahan, R. Mellish, S. Vedi, and J. Et-compston, Measurement of mean trabecular plate thickness by a new computerized method, Bone, vol.8, issue.4, pp.227-230, 1987.
DOI : 10.1016/8756-3282(87)90169-4

J. Garrison, J. Gargac, and G. Et-niebur, Shear strength and toughness of trabecular bone are more sensitive to density than damage, Journal of Biomechanics, vol.44, issue.16, pp.2747-2754, 2011.
DOI : 10.1016/j.jbiomech.2011.09.002

A. Gefen, S. Portnoy, and I. Et-diamant, Inhomogeneity of tissue-level strain distributions in individual trabeculae: Mathematical model studies of normal and osteoporosis cases, Medical Engineering & Physics, vol.30, issue.5, pp.624-630, 2008.
DOI : 10.1016/j.medengphy.2007.07.001

H. Genant, K. Engelke, T. Fuerst, C. Glüer, S. Grampp et al., Noninvasive assessment of bone mineral and structure: State of the art, Journal of Bone and Mineral Research, vol.2, issue.P, pp.707-730, 1996.
DOI : 10.1002/jbmr.5650110602

L. Gibson, The mechanical behaviour of cancellous bone, Journal of Biomechanics, vol.18, issue.5, pp.317-328, 1985.
DOI : 10.1016/0021-9290(85)90287-8

L. Gibson and M. Ashby, Cellular solids : structure and properties, 1999.
DOI : 10.1017/CBO9781139878326

E. Giesen, M. Ding, M. Dalstra, and T. Et-van-eijden, Mechanical properties of cancellous bone in the human mandibular condyle are anisotropic, Journal of Biomechanics, vol.34, issue.6, pp.799-803, 2001.
DOI : 10.1016/S0021-9290(01)00030-6

I. Goda, M. Assidi, and J. Et-ganghoffer, A 3D elastic micropolar model of vertebral trabecular bone from lattice homogenization of the bone microstructure, Biomechanics and Modeling in Mechanobiology, vol.39, issue.6, pp.53-83, 2014.
DOI : 10.1007/s10237-013-0486-z
URL : https://hal.archives-ouvertes.fr/hal-01424977

S. Goldstein, R. Goulet, and D. Et-mccubbrey, Measurement and significance of three-dimensional architecture to the mechanical integrity of trabecular bone, Calcified Tissue International, vol.10, issue.12, pp.127-133, 1993.
DOI : 10.1007/BF01673421

R. Goulet, S. Goldstein, M. Ciarelli, J. Kuhn, M. Brown et al., The relationship between the structural and orthogonal compressive properties of trabecular bone, Journal of Biomechanics, vol.27, issue.4, pp.375-377, 1994.
DOI : 10.1016/0021-9290(94)90014-0

T. Guillen, Q. Zhang, G. Tozzi, A. Ohrndorf, H. Christ et al., Compressive behaviour of bovine cancellous bone and bone analogous materials, microCT characterisation and FE analysis, Journal of the Mechanical Behavior of Biomedical Materials, vol.4, issue.7, 2011.
DOI : 10.1016/j.jmbbm.2011.05.015

X. Guo and C. Kim, Mechanical consequence of trabecular bone loss and its treatment: a three-dimensional model simulation, Bone, vol.30, issue.2, pp.404-411, 2002.
DOI : 10.1016/S8756-3282(01)00673-1

H. Gupta and P. Et-zioupos, Fracture of bone tissue : The 'hows' and the 'whys'. Medical engineering & physics, pp.1209-1226, 2008.

M. Hahn, M. Vogel, M. Pompesius-kempa, and G. Et-delling, Trabecular bone pattern factor???a new parameter for simple quantification of bone microarchitecture, Bone, vol.13, issue.4, pp.327-330, 1992.
DOI : 10.1016/8756-3282(92)90078-B

T. Haire, R. Hodgskinson, P. Ganney, and C. Et-langton, A comparison of porosity, fabric and fractal dimension as predictors of the Young's modulus of equine cancellous bone, Medical Engineering & Physics, vol.20, issue.8, pp.20588-593, 1998.
DOI : 10.1016/S1350-4533(98)00063-0

J. Halgrin, Influence des paramètres architecturaux sur le comportement mécanique de l'os trabéculaire, 2009.

J. Halgrin, F. Chaari, and É. Et-markiewicz, On the effect of marrow in the mechanical behavior and crush response of trabecular bone, Journal of the Mechanical Behavior of Biomedical Materials, vol.5, issue.1, 2011.
DOI : 10.1016/j.jmbbm.2011.09.003

R. Hambli, Micro-CT finite element model and experimental validation of trabecular bone damage and fracture, Bone, vol.56, issue.2, pp.363-374, 2013.
DOI : 10.1016/j.bone.2013.06.028
URL : https://hal.archives-ouvertes.fr/hal-01087570

E. Hamed, E. Novitskaya, J. Li, I. Jasiuk, and J. Et-mckittrick, Experimentally-based multiscale model of the elastic moduli of bovine trabecular bone and its constituents, Materials Science and Engineering: C, vol.54, pp.207-216, 2015.
DOI : 10.1016/j.msec.2015.02.044

T. Harrigan and R. Et-mann, Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor, Journal of Materials Science, vol.32, issue.3, pp.761-767, 1984.
DOI : 10.1007/BF00540446

T. P. Harrigan, M. Jasty, R. W. Mann, and W. H. Et-harris, Limitations of the continuum assumption in cancellous bone, Journal of Biomechanics, vol.21, issue.4, pp.269-275, 1988.
DOI : 10.1016/0021-9290(88)90257-6

C. Hernandez, F. Lambers, J. Widjaja, C. Chapa, and C. Et-rimnac, Quantitative relationships between microdamage and cancellous bone strength and stiffness, Bone, vol.66, pp.205-213, 2014.
DOI : 10.1016/j.bone.2014.05.023

S. Hiermaier, Structures under crash and impact : continuum mechanics, discretization and experimental characterization, 2007.

S. Higgins, Strain rate and density dependent behaviour of bovine cancellous bone in compression, 2008.

T. Hildebrand and P. Et-rüegsegger, Quantification of bone microarchitecture with the structure model index Computer methods in biomechanices and bio medical engineering, pp.15-23, 1997.

M. Hobatho, J. Rho, and R. Et-ashman, Atlas of mechanical properties of human cortical and cancellous bone, Journal of Biomechanics, vol.25, issue.6, p.669, 1992.
DOI : 10.1016/0021-9290(92)90159-X

R. Hodgskinson and J. Et-currey, Young's modulus, density and material properties in cancellous bone over a large density range, Journal of Materials Science: Materials in Medicine, vol.7, issue.5, pp.377-381, 1992.
DOI : 10.1007/BF00705371

R. Hodgskinson, J. Currey, and G. Et-evans, Hardness, an indicator of the mechanical competence of cancellous bone, Journal of Orthopaedic Research, vol.48, issue.5, pp.754-758, 1989.
DOI : 10.1002/jor.1100070518

J. Homminga, B. Van-rietbergen, E. Lochmuller, H. Weinans, F. Eckstein et al., The osteoporotic vertebral structure is well adapted to the loads of daily life, but not to infrequent ???error??? loads, Bone, vol.34, issue.3, pp.34510-516, 2004.
DOI : 10.1016/j.bone.2003.12.001

J. H. Hong, M. S. Mun, and T. Et-lim, Strain rate dependent poroelastic behavior of bovine vertebral trabecular bone, KSME International Journal, vol.42, issue.7, pp.151032-1040, 2001.
DOI : 10.1016/0022-5096(94)90088-4

B. Hopkinson, A Method of Measuring the Pressure Produced in the Detonation of High Explosives or by the Impact of Bullets, Philosophical Transactions of the Royal Society of London, 1914.

P. Horgue, Modélisation multi-échelle d'un écoulement gaz-liquide dans un lit fixe de particules, 2012.

P. Hulme, S. Boyd, and S. Et-ferguson, Regional variation in vertebral bone morphology and its contribution to vertebral fracture strength, Bone, vol.41, issue.6, pp.41946-957, 2007.
DOI : 10.1016/j.bone.2007.08.019

J. R. Hutchinson, C. Delmer, C. E. Miller, T. Hildebrandt, A. A. Pitsillides et al., From Flat Foot to Fat Foot: Structure, Ontogeny, Function, and Evolution of Elephant "Sixth Toes", Science, vol.334, issue.6063, pp.3341699-1703, 2011.
DOI : 10.1126/science.1211437

D. Iliescu, D. Gehin, I. Iordanoff, F. Girot, and M. Et-gutiérrez, A discrete element method for the simulation of CFRP cutting, Composites Science and Technology, vol.70, issue.1, pp.73-80, 2010.
DOI : 10.1016/j.compscitech.2009.09.007

I. Iordanoff, J. L. Charles, and D. Et-andre, Development of the GranOO Discrete Element Platform for Dynamic Problems: Application for Tribological Application, ASME/STLE 2012 International Joint Tribology Conference, pp.325-329, 2012.
DOI : 10.1115/IJTC2012-61200

M. Isakov, S. Hiermaier, and V. Et-kuokkala, Improved specimen recovery in tensile split Hopkinson bar, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.41, issue.3, p.37220130194, 2014.
DOI : 10.1243/03093247JSA206

K. Jensen, L. Mosekilde, and L. Et-mosekilde, A model of vertebral trabecular bone architecture and its mechanical properties, Bone, vol.11, issue.6, pp.417-423, 1990.
DOI : 10.1016/8756-3282(90)90137-N

T. P. Johnson, On the rate-dependent constitutive response of cortical and trabecular bone, 2010.

K. Kanatani, Distribution of directional data and fabric tensors, International Journal of Engineering Science, vol.22, issue.2, pp.149-164, 1984.

V. Kefalas and D. Et-eftaxiopoulos, Experimental study of cancellous bone under large strains and a constitutive probabilistic model, Journal of the Mechanical Behavior of Biomedical Materials, vol.6, pp.41-52, 2012.
DOI : 10.1016/j.jmbbm.2011.10.006

D. Kim, C. Hunt, R. Zauel, D. Fyhrie, and Y. Et-yeni, The Effect of Regional Variations of the Trabecular Bone Properties on the Compressive Strength of Human Vertebral Bodies, Annals of Biomedical Engineering, vol.29, issue.10, pp.351907-1913, 2007.
DOI : 10.1007/s10439-007-9363-1

H. Kim and S. Et-al-hassani, A morphological model of vertebral trabecular bone, Journal of Biomechanics, vol.35, issue.8, pp.1101-1114, 2002.
DOI : 10.1016/S0021-9290(02)00053-2

H. M. Kjer and J. Et-wilm, Evaluation of surface registration algorithms for PET motion correction, 2010.

H. Kolsky, An Investigation of the Mechanical Properties of Materials at very High Rates of Loading, Proceedings of the Physical Society. Section B, vol.62, issue.11, pp.676-700, 1949.
DOI : 10.1088/0370-1301/62/11/302

D. Kopperdahl and T. Et-keaveny, Yield strain behavior of trabecular bone, Journal of Biomechanics, vol.31, issue.7, pp.31601-608, 1998.
DOI : 10.1016/S0021-9290(98)00057-8

P. Kowalczyk, Elastic properties of cancellous bone derived from finite element models of parameterized microstructure cells, Journal of Biomechanics, vol.36, issue.7, pp.961-972, 2003.
DOI : 10.1016/S0021-9290(03)00065-4

J. Kuhn, S. Goldstein, R. Choi, M. London, L. Feldkamp et al., Comparison of the trabecular and cortical tissue moduli from human iliac crests, Journal of Orthopaedic Research, vol.15, issue.6, pp.876-884, 1989.
DOI : 10.1002/jor.1100070614

J. Kuhn, S. Goldstein, M. Ciarelli, and L. Et-matthews, The limitations of canine trabecular bone as a model for human: A biomechanical study, Journal of Biomechanics, vol.22, issue.2, pp.95-107, 1989.
DOI : 10.1016/0021-9290(89)90032-8

Y. Lai, L. Qin, H. Yeung, K. Lee, and K. Et-chan, Regional differences in trabecular BMD and micro-architecture of weight-bearing bone under habitual gait loading???A pQCT and microCT study in human cadavers, Bone, vol.37, issue.2, pp.274-282, 2005.
DOI : 10.1016/j.bone.2005.04.025

É. Lakatos and I. Et-bojtár, Trabecular bone adaptation in a finite element frame model using load dependent fabric tensors, Mechanics of Materials, vol.44, pp.130-138, 2012.
DOI : 10.1016/j.mechmat.2011.07.012

F. M. Lambers, A. R. Bouman, E. V. Tkachenko, T. M. Keaveny, and C. J. Et-hernandez, The effects of tensile-compressive loading mode and microarchitecture on microdamage in human vertebral cancellous bone, Journal of Biomechanics, vol.47, issue.15, pp.473605-3612, 2014.
DOI : 10.1016/j.jbiomech.2014.10.011

T. Lamotte, Reconstruction 3D de la microarchitecture osseuse à partir d'un nombre limité de radiographies : apport de techniques de régularisation, 2006.

S. Lancianese, E. Kwok, C. Beck, and A. Et-lerner, Predicting regional variations in trabecular bone mechanical properties within the human proximal tibia using MR imaging, Bone, vol.43, issue.6, pp.431039-1046, 2008.
DOI : 10.1016/j.bone.2008.07.247

S. Laporte, F. David, V. Bousson, and S. Et-pattofatto, Dynamic behavior and microstructural properties of cancellous bone Arxiv preprint arXiv, pp.911-5114, 2009.

D. Last, Caractérisation de l'architecture tridimensionnelle du tissu trabéculaire in vitro et in vivo par IRM, 2003.

T. Lee, R. L. Kashyap, and C. Et-chu, Building Skeleton Models via 3-D Medial Surface Axis Thinning Algorithms, CVGIP: Graphical Models and Image Processing, vol.56, issue.6, pp.56462-478, 1994.
DOI : 10.1006/cgip.1994.1042

G. Lerman, M. Mccoy, J. A. Tropp, T. Et-zhang, and . Document, Robust computation of linear models, or how to find a needle in a haystack, 2012.

O. Lindahl, Mechanical Properties of Dried Defatted Spongy Bone, Acta Orthopaedica Scandinavica, vol.39, issue.1, pp.11-19, 1976.
DOI : 10.3109/17453677608998966

F. Linde and I. Et-hvid, The effect of constraint on the mechanical behaviour of trabecular bone specimens, Journal of Biomechanics, vol.22, issue.5, pp.485-490, 1989.
DOI : 10.1016/0021-9290(89)90209-1

F. Linde, I. Hvid, and F. Et-madsen, The effect of specimen geometry on the mechanical behaviour of trabecular bone specimens, Journal of Biomechanics, vol.25, issue.4, pp.359-368, 1992.
DOI : 10.1016/0021-9290(92)90255-Y

F. Linde, P. Nørgaard, I. Hvid, A. Odgaard, and K. Et-søballe, Mechanical properties of trabecular bone. Dependency on strain rate, Journal of Biomechanics, vol.24, issue.9, pp.803-809, 1991.
DOI : 10.1016/0021-9290(91)90305-7

F. Linde and H. Et-sørensen, The effect of different storage methods on the mechanical properties of trabecular bone, Journal of Biomechanics, vol.26, issue.10, pp.1249-1252, 1993.
DOI : 10.1016/0021-9290(93)90072-M

J. Liu, V. Shim, and P. Et-lee, Quasi-static Compressive and Tensile Tests on Cancellous Bone in Human Cervical Spine, Mechanics of Biological Systems and Materials, pp.109-118, 2013.
DOI : 10.1007/978-1-4614-4427-5_16

S. Lorenzetti, R. Carretta, R. Müller, and E. Et-stüssi, A new device and method for measuring the elastic modulus of single trabeculae, Medical Engineering & Physics, vol.33, issue.8, pp.33993-1000, 2011.
DOI : 10.1016/j.medengphy.2011.03.012

S. Majumdar, M. Kothari, P. Augat, D. Newitt, T. Link et al., High-Resolution Magnetic Resonance Imaging: Three-Dimensional Trabecular Bone Architecture and Biomechanical Properties, Bone, vol.22, issue.5, p.22445, 1998.
DOI : 10.1016/S8756-3282(98)00030-1

M. Martens, R. Van-audekercke, P. Delport, P. De-meester, and J. Et-mulier, The mechanical characteristics of cancellous bone at the upper femoral region, Journal of Biomechanics, vol.16, issue.12, pp.16971-983, 1983.
DOI : 10.1016/0021-9290(83)90098-2

R. Mccalden and J. Mc-geough, Age-Related Changes in the Compressive Strength of Cancellous Bone. The Relative Importance of Changes in Density and Trabecular Architecture*, The Journal of Bone & Joint Surgery, vol.79, issue.3, pp.79421-79428, 1997.
DOI : 10.2106/00004623-199703000-00016

J. H. Mcdonald, Handbook of biological statistics, 2009.

P. Mente and J. Et-lewis, Experimental method for the measurement of the elastic modulus of trabecular bone tissue, Journal of Orthopaedic Research, vol.104, issue.3, pp.456-461, 1989.
DOI : 10.1002/jor.1100070320

T. A. Metzger, T. C. Kreipke, T. J. Vaughan, L. M. Mcnamara, and G. L. Et-niebur, The In Situ Mechanics of Trabecular Bone Marrow: The Potential for Mechanobiological Response, Journal of Biomechanical Engineering, vol.137, issue.1, p.11006, 2015.
DOI : 10.1115/1.4028985

T. A. Metzger, J. M. Shudick, R. Seekell, Y. Zhu, and G. L. Et-niebur, Rheological behavior of fresh bone marrow and the effects of storage, Journal of the Mechanical Behavior of Biomedical Materials, vol.40, pp.307-313, 2014.
DOI : 10.1016/j.jmbbm.2014.09.008

D. Mitton, C. Rumelhart, D. Hans, and P. Et-meunier, The effects of density and test conditions on measured compression and shear strength of cancellous bone from the lumbar vertebrae of ewes, Medical Engineering & Physics, vol.19, issue.5, pp.464-474, 1997.
DOI : 10.1016/S1350-4533(97)00001-5

E. Mittra, C. Rubin, B. Gruber, and Y. Et-qin, Evaluation of trabecular mechanical and microstructural properties in human calcaneal bone of advanced age using mechanical testing, µct, and dxa, Journal of biomechanics, issue.2, pp.41368-375, 2008.

E. Mittra, C. Rubin, and Y. Et-qin, Interrelationship of trabecular mechanical and microstructural properties in sheep trabecular bone, Journal of Biomechanics, vol.38, issue.6, pp.1229-1237, 2005.
DOI : 10.1016/j.jbiomech.2004.06.007

J. Moreno and F. Forriol, Effects of preservation on the mechanical strength and chemical composition of cortical bone: an experimental study in sheep femora, Biomaterials, vol.23, issue.12, pp.2615-2619, 2002.
DOI : 10.1016/S0142-9612(01)00402-1

E. Morgan and T. Et-keaveny, Dependence of yield strain of human trabecular bone on anatomic site, Journal of Biomechanics, vol.34, issue.5, pp.569-577, 2001.
DOI : 10.1016/S0021-9290(01)00011-2

L. Mosekilde, L. Mosekilde, and C. Et-danielsen, Biomechanical competence of vertebral trabecular bone in relation to ash density and age in normal individuals, Bone, vol.8, issue.2, pp.79-85, 1987.
DOI : 10.1016/8756-3282(87)90074-3

G. Mouchaham, Architectures supramoléculaires à structures ouvertes fondées sur la liaison hydrogène : élaboration, caractérisation structurale et propriétés de sorption, 2012.

R. Müller and P. Et-rüegsegger, Analysis of mechanical properties of cancellous bone under conditions of simulated bone atrophy, Journal of Biomechanics, vol.29, issue.8, pp.1053-1060, 1996.
DOI : 10.1016/0021-9290(96)00006-1

B. Nait-ali, Elaboration, caractérisation et modélisation de matériaux poreux : Influence de la structure poreuse sur la conductivité thermique effective, 2005.

A. Nazarian, M. Stauber, D. Zurakowski, B. Snyder, and R. Et-müller, The interaction of microstructure and volume fraction in predicting failure in cancellous bone, Bone, vol.39, issue.6, pp.391196-1202, 2006.
DOI : 10.1016/j.bone.2006.06.013

S. Nemat-nasser, J. B. Isaacs, and J. E. Et-starrett, Hopkinson Techniques for Dynamic Recovery Experiments, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.435, issue.1894, pp.371-391, 1991.
DOI : 10.1098/rspa.1991.0150

K. K. Nishiyama, G. M. Campbell, R. J. Klinck, and S. K. Et-boyd, Reproducibility of bone micro-architecture measurements in rodents by in vivo micro-computed tomography is maximized with three-dimensional image registration, Bone, vol.46, issue.1, pp.155-161, 2010.
DOI : 10.1016/j.bone.2009.09.023

M. Oda, J. Konishi, and S. Et-nemat-nasser, Some experimentally based fundamental results on the mechanical behaviour of granular materials, G??otechnique, vol.30, issue.4, pp.479-495, 1980.
DOI : 10.1680/geot.1980.30.4.479

Z. Oden, D. Selvitelli, W. Hayes, and E. Et-myers, The Effect of Trabecular Structure on DXA-based Predictions of Bovine Bone Failure, Calcified Tissue International, vol.63, issue.1, pp.67-73, 1998.
DOI : 10.1007/s002239900491

A. Odgaard and H. Et-gundersen, Quantification of connectivity in cancellous bone, with special emphasis on 3-D reconstructions, Bone, vol.14, issue.2, pp.173-182, 1993.
DOI : 10.1016/8756-3282(93)90245-6

A. Odgaard, E. Jensen, and H. Et-gundersen, Estimation of structural anisotropy based on volume orientation. A new concept, Journal of Microscopy, vol.52, issue.2, pp.149-162, 1990.
DOI : 10.1111/j.1365-2818.1990.tb02955.x

A. Odgaard, J. Kabel, B. Van-rietbergen, M. Dalstra, and R. Et-huiskes, Fabric and elastic principal directions of cancellous bone are closely related, Journal of Biomechanics, vol.30, issue.5, pp.487-495, 1997.
DOI : 10.1016/S0021-9290(96)00177-7

R. Oftadeh, M. Perez-viloria, J. C. Villa-camacho, A. Vaziri, and A. Et-nazarian, Biomechanics and Mechanobiology of Trabecular Bone: A Review, Journal of Biomechanical Engineering, vol.137, issue.1, p.10802, 2015.
DOI : 10.1115/1.4029176

N. Otsu, A Threshold Selection Method from Gray-Level Histograms, IEEE Transactions on Systems, Man, and Cybernetics, vol.9, issue.1, pp.285-29623, 1975.
DOI : 10.1109/TSMC.1979.4310076

J. Ouyang, G. Yang, W. Wu, Q. Zhu, and S. Et-zhong, Biomechanical characteristics of human trabecular bone, Clinical Biomechanics, vol.12, issue.7-8, pp.522-524, 1997.
DOI : 10.1016/S0268-0033(97)00035-1

F. Padilla, F. Peyrin, and P. Et-laugier, Prediction of backscatter coefficient in trabecular bones using a numerical model of three-dimensional microstructure, The Journal of the Acoustical Society of America, vol.113, issue.2, p.1122, 2003.
DOI : 10.1121/1.1534835

A. Parfitt, Bone histomorphometry: Standardization of nomenclature, symbols and units (summary of proposed system), Bone, vol.9, issue.1, pp.67-69, 1988.
DOI : 10.1016/8756-3282(88)90029-4

A. Parfitt, C. Mathews, A. Villanueva, M. Kleerekoper, B. Frame et al., Relationships between surface, volume, and thickness of iliac trabecular bone in aging and in osteoporosis. Implications for the microanatomic and cellular mechanisms of bone loss., Journal of Clinical Investigation, vol.72, issue.4, p.1396, 1983.
DOI : 10.1172/JCI111096

I. Parkinson and N. Et-fazzalari, Interrelationships Between Structural Parameters of Cancellous Bone Reveal Accelerated Structural Change at Low Bone Volume, Journal of Bone and Mineral Research, vol.27, issue.12, pp.2200-2205, 2003.
DOI : 10.1359/jbmr.2003.18.12.2200

I. H. Parkinson, A. Badiei, and N. L. Et-fazzalari, Variation in segmentation of bone from micro-CT imaging: implications for quantitative morphometric analysis, Australasian Physics & Engineering Sciences in Medicine, vol.20, issue.2, pp.31160-164, 2008.
DOI : 10.1007/BF03178592

A. Pasko, O. Fryazinov, T. Vilbrandt, P. Fayolle, and V. Et-adzhiev, Procedural function-based modelling of volumetric microstructures, Graphical Models, vol.73, issue.5, pp.165-181, 2011.
DOI : 10.1016/j.gmod.2011.03.001

R. Pelker, G. Friedlaender, T. Markham, M. Panjabi, and C. Et-moen, Effects of freezing and freeze-drying on the biomechanical properties of rat bone, Journal of Orthopaedic Research, vol.25, issue.4, pp.405-411, 2005.
DOI : 10.1002/jor.1100010409

E. Perilli, M. Baleani, C. Öhman, R. Fognani, F. Baruffaldi et al., Dependence of mechanical compressive strength on local variations in microarchitecture in cancellous bone of proximal human femur, Journal of Biomechanics, vol.41, issue.2, pp.41438-446, 2008.
DOI : 10.1016/j.jbiomech.2007.08.003

E. Perrier, Structure géométrique et fonctionnement hydrique des sols : simulations exploratoires, 1995.

J. Pialat, N. Vilayphiou, S. Boutroy, P. Gouttenoire, E. Sornay-rendu et al., Local topological analysis at the distal radius by HR-pQCT: Application to in vivo bone microarchitecture and fracture assessment in the OFELY study, Bone, vol.51, issue.3, pp.51362-368, 2012.
DOI : 10.1016/j.bone.2012.06.008
URL : https://hal.archives-ouvertes.fr/hal-00797821

A. Pilcher, X. Wang, Z. Kaltz, J. Garrison, G. Niebur et al., High Strain Rate Testing of Bovine Trabecular Bone, Journal of Biomechanical Engineering, vol.132, issue.8, p.81012, 2010.
DOI : 10.1115/1.4000086

A. Pilcher, X. Wang, G. Niebur, J. Mason, B. Song et al., High strain rate behavior of callellous bone, SEM X International Congress and Exposition on Experimental and Applied Mechanics, 2004.

L. Pothuaud, B. Van-rietbergen, L. Mosekilde, O. Beuf, P. Levitz et al., Combination of topological parameters and bone volume fraction better predicts the mechanical properties of trabecular bone, Journal of Biomechanics, vol.35, issue.8, pp.351091-1099, 2002.
DOI : 10.1016/S0021-9290(02)00060-X

M. Prot, T. Cloete, and S. Et-pattofatto, Dynamic compression and recovery of cancellous bone for microstructural investigation, EPJ Web of Conferences, p.3003, 2012.
DOI : 10.1051/epjconf/20122603003

M. Prot, D. Saletti, S. Pattofatto, V. Bousson, and S. Et-laporte, Links between mechanical behavior of cancellous bone and its microstructural properties under dynamic loading, Journal of Biomechanics, vol.48, issue.3, pp.498-503, 2015.
DOI : 10.1016/j.jbiomech.2014.12.002

L. Rapillard, M. Charlebois, and P. Et-zysset, Compressive fatigue behavior of human vertebral trabecular bone, Journal of Biomechanics, vol.39, issue.11, pp.2133-2139, 2006.
DOI : 10.1016/j.jbiomech.2005.04.033

C. Räth, T. Baum, R. Monetti, I. Sidorenko, P. Wolf et al., Scaling relations between trabecular bone volume fraction and microstructure at different skeletal sites, Bone, vol.57, issue.2, pp.377-383, 2013.
DOI : 10.1016/j.bone.2013.09.004

N. Reznikov, H. Chase, V. Brumfeld, R. Shahar, and S. Et-weiner, The 3D structure of the collagen fibril network in human trabecular bone: Relation to trabecular organization, Bone, vol.71, pp.189-195, 2015.
DOI : 10.1016/j.bone.2014.10.017

J. Rho, R. Ashman, and C. Et-turner, Young's modulus of trabecular and cortical bone material: Ultrasonic and microtensile measurements, Journal of Biomechanics, vol.26, issue.2, pp.111-119, 1993.
DOI : 10.1016/0021-9290(93)90042-D

J. Rho, T. Tsui, and G. Et-pharr, Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation, Biomaterials, vol.18, issue.20, pp.181325-1330, 1997.
DOI : 10.1016/S0142-9612(97)00073-2

J. Rho, J. Zerwekh, and R. Et-ashman, Examination of several techniques for predicting trabecular elastic modulus and ultimate strength in the human lumbar spine, Clinical Biomechanics, vol.9, issue.2, pp.67-71, 1994.
DOI : 10.1016/0268-0033(94)90026-4

J. H. Ricketts and G. A. Et-head, A five-parameter logistic equation for investigating asymmetry of curvature in baroreflex studies, American Journal of Physiology-Regulatory, Integrative and Comparative Physiology, vol.277, issue.2, pp.441-454, 1999.

H. Ridha and P. J. Et-thurner, Finite element prediction with experimental validation of damage distribution in single trabeculae during three-point bending tests, Journal of the Mechanical Behavior of Biomedical Materials, vol.27, pp.94-106, 2013.
DOI : 10.1016/j.jmbbm.2013.07.005

A. Roberts and E. J. Garboczi, Computation of the linear elastic properties of random porous materials with a wide variety of microstructure, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.458, issue.2021, pp.1033-1054, 2002.
DOI : 10.1098/rspa.2001.0900

R. Dubois and C. C. , Conception, réalisation et mise en fonctionnement d'un banc d'essai de sollicitations dynamiques par barres de hopkinson, 2008.

A. Roux, J. Lecompte, L. Gras, S. Laporte, and I. Et-iordanoff, Tensile response of the muscle???tendon complex using discrete element model, Computer Methods in Biomechanics and Biomedical Engineering, vol.2013, issue.sup1, pp.17134-135, 2014.
DOI : 10.1152/japplphysiol.01361.2010

M. Roy, J. Rho, T. Tsui, and G. Et-pharr, Variation of young's modulus and hardness in human lumbar vertebrae measured by nanoindentation, ASME-PUBLICATIONS-BED, vol.33, pp.385-386, 1996.

J. Runkle and J. Et-pugh, The micro-mechanics of cancellous bone. ii. determination of the elastic modulus of individual trabeculae by a buckling analysis, Bulletin of the Hospital for Joint Diseases, vol.36, issue.12, 1975.

S. Ryan and J. Et-williams, Tensile testing of rodlike trabeculae excised from bovine femoral bone, Journal of Biomechanics, vol.22, issue.4, pp.351-355, 1989.
DOI : 10.1016/0021-9290(89)90049-3

T. M. Ryan and C. N. Shaw, Trabecular bone microstructure scales allometrically in the primate humerus and femur, Proceedings of the Royal Society B: Biological Sciences, vol.113, issue.3, p.20130172, 2013.
DOI : 10.1002/1096-8644(200011)113:3<389::AID-AJPA9>3.0.CO;2-I

D. Saletti, Mesures de champs hétérogènes dans un alliage à mémoire de forme de Nickel-Titane sous sollicitations dynamiques, 2011.

P. Salmon, X. Liu, and A. Et-sasov, A post-scan method for correcting artefacts of slow geometry changes during micro-tomographic scans, Journal of X-ray science and technology, vol.17, issue.2, pp.161-174, 2009.

C. Sandino, P. Kroliczek, D. D. Mcerlain, and S. K. Et-boyd, Predicting the permeability of trabecular bone by micro-computed tomography and finite element modeling, Journal of Biomechanics, vol.47, issue.12, pp.473129-3134, 2014.
DOI : 10.1016/j.jbiomech.2014.06.024

C. Sandino, D. D. Mcerlain, J. Schipilow, and S. K. Et-boyd, The poro-viscoelastic properties of trabecular bone: a micro computed tomography-based finite element study, Journal of the Mechanical Behavior of Biomedical Materials, vol.44, pp.1-9, 2015.
DOI : 10.1016/j.jmbbm.2014.12.018

M. Satake, Fabric tensor in granular materials, Delft. UTAM Conference on Deformation and Failure of Granular Materials, 1982.

C. Schoenfeld, E. Lautenschlager, and P. Et-meyer, Mechanical properties of human cancellous bone in the femoral head, Medical & Biological Engineering, vol.48, issue.3, pp.313-317, 1974.
DOI : 10.1007/BF02477797

R. Shertzer, Fabric tensors and effective properties of granular materials with application to snow, 2011.

V. Shim, L. Yang, J. Liu, and V. Et-lee, Characterisation of the dynamic compressive mechanical properties of cancellous bone from the human cervical spine, International Journal of Impact Engineering, vol.32, issue.1-4, pp.1-4525, 2005.
DOI : 10.1016/j.ijimpeng.2005.03.006

C. Showalter, B. Clymer, B. Richmond, and K. Et-powell, Three-dimensional texture analysis of cancellous bone cores evaluated at clinical CT resolutions, Osteoporosis International, vol.19, issue.2, pp.259-266, 2006.
DOI : 10.1007/s00198-005-1994-1

M. Silva and L. Et-gibson, Modeling the mechanical behavior of vertebral trabecular bone: Effects of age-related changes in microstructure, Bone, vol.21, issue.2, pp.191-199, 1997.
DOI : 10.1016/S8756-3282(97)00100-2

E. Simoncelli and . Portilla, Perceptually-driven statistical texture modeling, 1999.

I. Singh, The architecture of cancellous bone, Journal of Anatomy, vol.127, p.305, 1978.

. Skyscan, Morphometric parameters measured by skyscan? ct -analyser software, 2003.

M. Soicher, X. Wang, R. Zauel, and D. Et-fyhrie, Damage initiation sites in osteoporotic and normal human cancellous bone, Bone, vol.48, issue.3, pp.663-666, 2011.
DOI : 10.1016/j.bone.2010.11.009

B. Song and W. Et-chen, Split hopkinson pressure bar techniques for characterizing soft materials, 2005.

C. Turner, J. Rho, Y. Takano, T. Tsui, and G. Et-pharr, The elastic properties of trabecular and cortical bone tissues are similar: results from two microscopic measurement techniques, Journal of Biomechanics, vol.32, issue.4, pp.437-441, 1999.
DOI : 10.1016/S0021-9290(98)00177-8

C. H. Turner and D. B. Et-burr, Basic biomechanical measurements of bone: A tutorial, Bone, vol.14, issue.4, pp.595-608, 1993.
DOI : 10.1016/8756-3282(93)90081-K

C. H. Turner, S. C. Cowin, J. Y. Rho, R. B. Ashman, and J. C. Et-rice, The fabric dependence of the orthotropic elastic constants of cancellous bone, Journal of Biomechanics, vol.23, issue.6, pp.549-561, 1990.
DOI : 10.1016/0021-9290(90)90048-8

M. J. Turunen, V. Prantner, J. S. Jurvelin, H. Kröger, and H. Et-isaksson, Composition and microarchitecture of human trabecular bone change with age and differ between anatomical locations, Bone, vol.54, issue.1, pp.118-125, 2013.
DOI : 10.1016/j.bone.2013.01.045

D. Ulrich, B. Van-rietbergen, and A. Laib, The ability of three-dimensional structural indices to reflect mechanical aspects of trabecular bone, Bone, vol.25, issue.1, pp.55-60, 1999.
DOI : 10.1016/S8756-3282(99)00098-8

D. Ulrich, B. Van-rietbergen, H. Weinans, and P. Et-rüegsegger, Finite element analysis of trabecular bone structure: a comparison of image-based meshing techniques, Journal of Biomechanics, vol.31, issue.12, pp.311187-1192, 1998.
DOI : 10.1016/S0021-9290(98)00118-3

A. C. Vale, M. Pereira, A. Maurício, P. Amaral, L. Rosa et al., Micro-computed tomography and compressive characterization of trabecular bone, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.438, pp.199-205, 2013.
DOI : 10.1016/j.colsurfa.2013.01.057

D. Vashishth, J. Koontz, S. Qiu, D. Lundin-cannon, Y. Yeni et al., In vivo diffuse damage in human vertebral trabecular bone, Bone, vol.26, issue.2, pp.147-152, 2000.
DOI : 10.1016/S8756-3282(99)00253-7

K. Verdelis, L. Lukashova, E. Atti, P. Mayer-kuckuk, M. Peterson et al., MicroCT morphometry analysis of mouse cancellous bone: Intra- and inter-system reproducibility, Bone, vol.49, issue.3, pp.49580-587, 2011.
DOI : 10.1016/j.bone.2011.05.013

E. Verhulp, Analyses of trabecular bone failure, 2006.

A. Vesterby, L. Mosekilde, H. Gundersen, F. Melsen, L. Mosekilde et al., Biologically meaningful determinants of the in vitro strength of lumbar vertebrae, Bone, vol.12, issue.3, 1991.
DOI : 10.1016/8756-3282(91)90044-J

S. Viguet-carrin, H. Follet, E. Gineyts, J. Roux, F. Munoz et al., Association between collagen cross-links and trabecular microarchitecture properties of human vertebral bone, Bone, vol.46, issue.2, pp.46342-347, 2010.
DOI : 10.1016/j.bone.2009.10.001
URL : https://hal.archives-ouvertes.fr/inserm-00557216

N. Vilayphiou, Évaluation de la microarchitecture trabéculaire et des propriétés mécaniques osseuses in vivo chez l'humain par scanner périphérique a haute résolution : application clinique à l'ostéoporose, 2010.

M. Vogel, M. Hahn, and G. Et-delling, Relation between 2- and 3-dimensional architecture of trabecular bone in the human spine, Bone, vol.14, issue.3, pp.199-203, 1993.
DOI : 10.1016/8756-3282(93)90141-V

G. Voronoï, Nouvelles applications des paramètres continus à la théorie des formes quadratiques. deuxième mémoire. recherches sur les parallélloèdres primitifs, Journal für die reine und angewandte Mathematik, pp.198-287, 1908.

H. Walter, F. Lbath, D. Mitton, E. Cendre, and C. Et-rumelhart, Three-dimensional finite element modelling of the mechanical behaviour of human vertebral cancellous bone, Computer methods in biomechanices and biomedical engineering 2, p.331, 1999.

J. Wegrzyn, J. Roux, M. E. Arlot, S. Boutroy, N. Vilayphiou et al., vertebrae, Journal of Bone and Mineral Research, vol.354, issue.11, pp.252324-2331, 2010.
DOI : 10.1002/jbmr.164
URL : https://hal.archives-ouvertes.fr/hal-00982923

W. Whitehouse, The quantitative morphology of anisotropic trabecular bone, Journal of Microscopy, vol.101, issue.2, pp.153-168, 1974.
DOI : 10.1111/j.1365-2818.1974.tb03878.x

R. P. Widmer and S. J. Et-ferguson, On the interrelationship of permeability and structural parameters of vertebral trabecular bone: a parametric computational study, Computer Methods in Biomechanics and Biomedical Engineering, vol.222, issue.2, pp.1-15, 2012.
DOI : 10.1016/S0021-9290(03)00128-3

S. Yamada, S. Tadano, and S. Et-fukuda, Nanostructure and elastic modulus of single trabecula in bovine cancellous bone, Journal of Biomechanics, vol.47, issue.14, pp.473482-3487, 2014.
DOI : 10.1016/j.jbiomech.2014.09.009

Y. Yan, W. Qi, J. Wang, L. Liu, E. Teo et al., Relationship between architectural parameters and sample volume of human cancellous bone in micro-CT scanning, Medical Engineering & Physics, vol.33, issue.6, pp.33764-769, 2011.
DOI : 10.1016/j.medengphy.2011.01.014

E. Yang and S. Et-delamora, Minimally Invasive Treatment of Intertrochanteric Hip Fractures with the Gotfried Percutaneous Compression Plate, Orthopedics, vol.31, issue.1, p.3129, 2008.
DOI : 10.3928/01477447-20080101-43

O. Yeh and T. Et-keaveny, Biomechanical effects of intraspecimen variations in trabecular architecture: a three-dimensional finite element study, Bone, vol.25, issue.2, pp.223-228, 1999.
DOI : 10.1016/S8756-3282(99)00092-7

Y. Yeni, M. Zinno, J. Yerramshetty, R. Zauel, and D. Et-fyhrie, Variability of trabecular microstructure is age-, gender-, race- and anatomic site-dependent and affects stiffness and stress distribution properties of human vertebral cancellous bone, Bone, vol.49, issue.4, pp.886-894, 2011.
DOI : 10.1016/j.bone.2011.07.006

S. Youssef, Etude par tomographie X et modélisation par éléments finis du comportement mécanique des mousses solides, 2004.

B. Zhou, X. S. Liu, J. Wang, X. L. Lu, A. J. Fields et al., Dependence of mechanical properties of trabecular bone on plate???rod microstructure determined by individual trabecula segmentation (ITS), Journal of Biomechanics, vol.47, issue.3, pp.47702-708, 2014.
DOI : 10.1016/j.jbiomech.2013.11.039

M. Zhu, T. Keller, and D. Et-spengler, Effects of specimen load-bearing and free surface layers on the compressive mechanical properties of cellular materials, Journal of Biomechanics, vol.27, issue.1, pp.57-66, 1994.
DOI : 10.1016/0021-9290(94)90032-9

H. Zilch, A. Rohlmann, G. Bergmann, and R. Et-kölbel, Material properties of femoral cancellous bone in axial loading, Archives of Orthopaedic and Traumatic Surgery, vol.12, issue.4, pp.257-262, 1980.
DOI : 10.1007/BF00380706

R. Boruah, S. Henderson, K. Subit, D. Salzar, R. Shender et al., Response of human skull bone to dynamic compressive loading, Proceedings of the IRCOBI Conference, 2013.

M. L. Bouxsein, S. K. Boyd, B. A. Christiansen, R. E. Guldberg, K. J. Jepsen et al., Guidelines for assessment of bone microstructure in rodents using micro-computed tomography, Journal of Bone and Mineral Research, vol.22, issue.7, pp.1468-1486, 2010.
DOI : 10.1002/jbmr.141

F. Chaary, E. Markiewicz, and P. Drazetic, Identification of the spongy bone mechanical behavior under compression loads: numerical simulation versus experimental results, International Journal of Crashworthiness, vol.6, issue.3, pp.247-253, 2007.
DOI : 10.1016/S0021-9290(99)00115-3

M. Charlebois, C. Haunschmid, and P. Zysset, CONFINED AND UNCONFINED COMPRESSION TESTS OF HUMAN TRABECULAR BONE UP TO VERY LARGE STRAINS, Journal of Biomechanics, vol.41, issue.S1, p.41, 2008.
DOI : 10.1016/S0021-9290(08)70048-4

M. Doube, M. M. Kosowski, I. Arganda-carreras, F. Cordelieres, R. P. Dougherty et al., BoneJ: Free and extensible bone image analysis in ImageJ, Bone, vol.47, issue.6, pp.1076-1079, 2010.
DOI : 10.1016/j.bone.2010.08.023

A. G. Evans, J. W. Hutchinson, and M. F. Ashby, Multifunctionality of cellular metal systems, Progress in Materials Science, vol.43, issue.3, pp.171-221, 1998.
DOI : 10.1016/S0079-6425(98)00004-8

H. Follet, K. Bruyre-garnier, F. Peyrin, J. P. Roux, M. E. Arlot et al., Relationship between compressive properties of human os calcis cancellous bone and microarchitecture assessed from 2D and 3D synchrotron microtomography, Bone, vol.36, issue.2, pp.340-351, 2005.
DOI : 10.1016/j.bone.2004.10.011
URL : https://hal.archives-ouvertes.fr/inserm-00557240

H. Follet, S. Viguet-carrin, B. Burt-pichat, B. Depalle, Y. Bala et al., Effects of preexisting microdamage, collagen cross-links, degree of mineralization, age, and architecture on compressive mechanical properties of elderly human vertebral trabecular bone, Journal of Orthopaedic Research, vol.17, issue.4, pp.481-488, 2011.
DOI : 10.1002/jor.21275
URL : https://hal.archives-ouvertes.fr/inserm-00557212

J. Garrison, J. Gargac, and G. Niebur, Shear strength and toughness of trabecular bone are more sensitive to density than damage, Journal of Biomechanics, vol.44, issue.16, pp.2747-2754, 2011.
DOI : 10.1016/j.jbiomech.2011.09.002

G. D. Gary and . Manual, Available from, 2005.

H. K. Genant, K. Engelke, T. Fuerst, C. C. Gluer, S. Grampp et al., Noninvasive assessment of bone mineral and structure: State of the art, Journal of Bone and Mineral Research, vol.2, issue.P, pp.707-730, 1996.
DOI : 10.1002/jbmr.5650110602

R. M. Guedes, J. A. Simoes, and J. L. Morais, Viscoelastic behaviour and failure of bovine cancellous bone under constant strain rate, Journal of Biomechanics, vol.39, issue.1, pp.49-60, 2006.
DOI : 10.1016/j.jbiomech.2004.11.005

J. Halgrin, Influence Des Paramètres Architecturaux Sur le Comportement Mécanique de L'os Trabéculaire (Ph.D. thesis) Université Lille Nord-de-France. Available from, 2009.

J. Halgrin, F. Chaari, and E. Markiewicz, On the effect of marrow in the mechanical behavior and crush response of trabecular bone, Journal of the Mechanical Behavior of Biomedical Materials, vol.5, issue.1, pp.231-237, 2012.
DOI : 10.1016/j.jmbbm.2011.09.003

S. Higgins, Strain Rate and Density Dependent Behaviour of Bovine Cancellous Bone in Compression. (MSc. thesis), 2008.

S. Laporte, F. David, V. Bousson, and S. Pattofatto, Dynamic behavior and microstructural properties of cancellous bone, DYMAT 2009, 9th International Conferences on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, pp.895-900, 2009.
DOI : 10.1051/dymat/2009125
URL : https://hal.archives-ouvertes.fr/hal-00436386

F. Linde and I. Hvid, The effect of constraint on the mechanical behaviour of trabecular bone specimens, Journal of Biomechanics, vol.22, issue.5, pp.485-490, 1989.
DOI : 10.1016/0021-9290(89)90209-1

F. Linde, P. Nørgaard, I. Hvid, A. Odgaard, and K. Sballe, Mechanical properties of trabecular bone. Dependency on strain rate, Journal of Biomechanics, vol.24, issue.9, pp.803-809, 1991.
DOI : 10.1016/0021-9290(91)90305-7

F. Linde, I. Hvid, and F. Madsen, The effect of specimen geometry on the mechanical behaviour of trabecular bone specimens, Journal of Biomechanics, vol.25, issue.4, pp.359-368, 1992.
DOI : 10.1016/0021-9290(92)90255-Y

F. Linde and H. Sørensen, The effect of different storage methods on the mechanical properties of trabecular bone, Journal of Biomechanics, vol.26, issue.10, pp.1249-1252, 1993.
DOI : 10.1016/0021-9290(93)90072-M

J. Liu, D. Saletti, S. Pattofatto, and H. Zhao, Impact testing of polymeric foam using Hopkinson bars and digital image analysis, Polymer Testing, vol.36, pp.101-109, 2014.
DOI : 10.1016/j.polymertesting.2014.03.014
URL : https://hal.archives-ouvertes.fr/hal-01137384

D. Mitton, C. Rumelhart, D. Hans, and P. J. Meunier, The effects of density and test conditions on measured compression and shear strength of cancellous bone from the lumbar vertebrae of ewes, Medical Engineering & Physics, vol.19, issue.5, pp.464-474, 1997.
DOI : 10.1016/S1350-4533(97)00001-5

E. Mittra, C. Rubin, and Y. X. Qin, Interrelationship of trabecular mechanical and microstructural properties in sheep trabecular bone, Journal of Biomechanics, vol.38, issue.6, pp.1229-1237, 2005.
DOI : 10.1016/j.jbiomech.2004.06.007

E. F. Morgan and T. M. Keaveny, Dependence of yield strain of human trabecular bone on anatomic site, Journal of Biomechanics, vol.34, issue.5, pp.569-577, 2001.
DOI : 10.1016/S0021-9290(01)00011-2

A. Nazarian, A. Arroyo, F. Rosso, C. Aran, S. Snyder et al., Tensile properties of rat femoral bone as functions of bone volume fraction, apparent density and volumetric bone mineral density, Journal of Biomechanics, vol.44, issue.13, pp.2482-2488, 2011.
DOI : 10.1016/j.jbiomech.2011.06.016

E. Perilli, M. Baleani, C. Ohman, R. Fognani, F. Baruffaldi et al., Dependence of mechanical compressive strength on local variations in microarchitecture in cancellous bone of proximal human femur, Journal of Biomechanics, vol.41, issue.2, pp.438-446, 2007.
DOI : 10.1016/j.jbiomech.2007.08.003

A. Syahrom, Mechanical and Micro-architectural Analyses of Cancellous Bone Through Experiment and Computer Simulation, IFMBE, 2011.

J. Teo, K. M. Si-hoe, J. E. Keh, and S. H. Teoh, Relationship between CT intensity, micro-architecture and mechanical properties of porcine vertebral cancellous bone, Clinical Biomechanics, vol.21, issue.3, pp.235-244, 2006.
DOI : 10.1016/j.clinbiomech.2005.11.001

B. Van-rietbergen, H. Weinans, R. Huiskes, and A. Odgaard, A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models, Journal of Biomechanics, vol.28, issue.1, pp.69-81, 1995.
DOI : 10.1016/0021-9290(95)80008-5

Y. N. Yeni, M. J. Zinno, J. S. Yerramshetty, R. Zauel, and D. P. Fyhrie, Variability of trabecular microstructure is age-, gender-, race- and anatomic site-dependent and affects stiffness and stress distribution properties of human vertebral cancellous bone, Bone, vol.49, issue.4, pp.886-889, 2011.
DOI : 10.1016/j.bone.2011.07.006

B. Zhou, S. Liu, X. Wang, J. , L. Lu et al., Dependence of mechanical properties of trabecular bone on plate???rod microstructure determined by individual trabecula segmentation (ITS), Journal of Biomechanics, vol.47, issue.3, pp.702-708, 2014.
DOI : 10.1016/j.jbiomech.2013.11.039

M. Prot, Links between mechanical behavior of cancellous bone and its microstructural properties under dynamic loading, Journal of Biomechanics, vol.48, issue.3, 2015.
DOI : 10.1016/j.jbiomech.2014.12.002

A. Tableau, 1. ? Régressions développées pour les meilleures paires de paramètres corrélés (microstructure vs réponse mécanique) pour chaque régime ou condition au limite, QS : quasi-statique, D : Dynamique, CD : Dynamique confinée. Meilleures régressions ombragées