R. Ramarotafika, P. F. Bariani, T. Dal-negro, S. Bruschi, J. Barros et al., «Testing and modelling of material response to deformation in bulk metal forming,» CIRP Annals -Manufacturing Technology, Modélisation stochastique de la variabilité des propriétés magnétiques des matériaux ferromagnétiques : application sur des stators de machines électriques Thèse de doctorat, Ecole Nationale des Arts et Metiers, 2012. [3] Verbeken et Y. Houbaert, «On the correlation between microstructure and magnetic losses in electrical steel, pp.543-595, 2004.

L. Bouarroudj, Medam, «Détermination des paramètres d'une machine à griffes Application à l'automobile,» Thèse de doctorat, INPG Methods of measurements of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame, Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of a single sheet tester, pp.60404-60407, 1991.

Y. Gabi, Modélisation FEM du système de contrôle non destructif 3MA en ligne de production des aciers dual phase, Thèse de doctorat, 2012.

N. Bowler, Four-point potential drop measurements for materials characterization, Measurement Science and Technology, vol.22, issue.1, p.111, 2011.
DOI : 10.1088/0957-0233/22/1/012001

O. Stupakov, H. Kikuchi, T. Liu, and T. Takagi, Applicability of local magnetic measurements, Measurement, vol.42, issue.5, pp.706-710, 2009.
DOI : 10.1016/j.measurement.2008.11.005

S. Tumanski, A multi-coil sensor for tangential magnetic field investigations, Journal of Magnetism and Magnetic Materials, vol.242, issue.245, pp.1153-1156, 2002.
DOI : 10.1016/S0304-8853(01)01302-6

A. Benabou, Contribution à la caractérisation et à la modélisation de matériaux magnétiques en vue d'une implantation dans un code de calcul de champ, Thèse de doctorat, 2002.

P. Brissonneau, Magnétisme et matériaux magnétiques pour l'électrotechnique, Hermes, 2007.

C. Cyr, Modélisation et caractérisation des matériaux magnétiques composites doux utilisés dans les machines électriques, Thèse de doctorat, 2007.

O. Geoffroy, Physique des matériaux magnétiques, d2080, Techniques de l'ingénieur, 2006.

O. Geoffroy, Propriétés techniques des matériaux magnétiques, d2081, Techniques de l'ingénieur, 2008.

T. Waeckerlé, Matériaux magnétiques doux cristallins-Magnétisme et métallurgie appliqués, 2010.

G. Bertotti, Physical interpretation of eddy current losses in ferromagnetic materials. I. Theoretical considerations, Journal of Applied Physics, vol.57, issue.6, pp.2110-2117, 1985.
DOI : 10.1063/1.334404

R. H. Pry and C. P. Bean, Calculation of the Energy Loss in Magnetic Sheet Materials Using a Domain Model, Journal of Applied Physics, vol.29, issue.3, pp.13-532, 1958.
DOI : 10.1063/1.1723212

P. Rodriguez-calvillo, Y. Houbaert, R. Petrov, and L. , Kestens et R. Colas, «High temperature deformation of silicon steel, Materials Chemistry and Physics, vol.136, pp.12-710, 2012.

M. Grumbach, Aciers d'usage général, Classification et métallurgie, vol.4515, 2005.

C. Becquart, Les défauts cristallins, Villeneuve d'Ascq: ENSCL, 2012.

J. Vogt, Analyse mécanique des solides, Villeneuve d'Ascq: ENSCL, 2012.

R. Colas, A model for the hot deformation of low-carbon steel, Journal of Materials Processing Technology, vol.62, issue.1-3, pp.180-184, 1996.
DOI : 10.1016/0924-0136(95)02227-9

P. Bariani, Dal Negro, «Material response to continuously varying rate of straining during hot forging operations, pp.183-186, 1999.

F. Montheillet, Métallurgie en mise en forme à chaud, Techniques de l'ingénieur, 2009.

J. Urcola and C. , Influence of changing strain rate on microstructure during hot deformation, Acta Metallurgica, vol.35, issue.11, pp.2649-2657, 1987.
DOI : 10.1016/0001-6160(87)90264-1

K. Rao, Y. Prasad, and E. B. , Hawbolt, «Hot deformation studies on a low-carbon steel : part 1 -flow curves and the constitutive relationship, Materials Science and Engineering, vol.56, pp.897-907, 1996.

Y. Huang and W. , Formation of ultrafine grained ferrite in low carbon steel by heavy deformation in ferrite or dual phase region, Journal of Materials Processing Technology, vol.134, issue.1, pp.19-25, 2003.
DOI : 10.1016/S0924-0136(02)00272-8

Y. Huang and L. Froyen, Important factors to obtain homogeneous and ultrafine ferrite???pearlite microstructure in low carbon steel, Journal of Materials Processing Technology, vol.124, issue.1-2, pp.216-226, 2002.
DOI : 10.1016/S0924-0136(02)00163-2

J. Zhao, Z. Jiang, and C. Lee, Enhancing impact fracture toughness and tensile properties of a microalloyed cast steel by hot forging and post-forging heat treatment processes, Materials & Design, vol.47, pp.227-233, 2013.
DOI : 10.1016/j.matdes.2012.11.051

A. Craven, K. He, L. Gravie, and T. Baker, «Complex heterogeneous precipitation in titanium-niobium microalloyed Al-Killed HSLA steels-I (Ti,Nbà(C,N) particles, Acta Materialia, vol.48, pp.115-3857, 2000.

M. Irani and A. K. Taheri, «Effect of forging temperature on homiogeneity of microstructure and hardness of precision forged steel spur gear, Materials Chemistry and Physics, vol.112, pp.13-1099, 2008.

T. El-bitar, N. Fouad, and A. Zaky, Effect of cooling rate after controlled forging on properties of low carbon multi-microalloyed steels, Materials Science and Engineering: A, vol.534, pp.514-520, 2012.
DOI : 10.1016/j.msea.2011.11.101

F. Montheillet, Metallurgie en mise en forme à froid, Techniques de l'ingénieur, 2008.

E. Felder, Procédés d'usinage -Présentation, Techniques de l'ingénieur, 2008.

F. J. Landgraf and J. R. , Silveira et D. Rodrigues-Jr, «Determining the effect of grain size and maximum induction upon coercive field of electrical steels, Journal of Magnetism and Magnetic Materials, vol.323, pp.118-2335, 2011.

L. Kestens, J. Jonas, and P. , Van Houtte et E. Aernoudt, «Orientation selection during static recrystallization of cross rolled non-oriented electrical steels,» Textures and Microstructures, pp.321-335, 1996.

Y. Zhang, Y. Xu, H. Liu, C. Li, G. Cao et al., Microstructure, texture and magnetic properties of strip-cast 1.3% Si non-oriented electrical steels, Journal of Magnetism and Magnetic Materials, vol.324, issue.20, pp.120-3328, 2012.
DOI : 10.1016/j.jmmm.2012.05.046

F. Landgraf, M. Emura, and J. , Teixeia et M. d. Campos, «Effect of grain size, deformation, aging and anisotropy on hysteresis loss of electrical steels, Journal of Magnetism and Magnetic Materials, vol.215, pp.12-97, 2000.

M. Li, Y. Kiao, W. Wang, G. W. Zhou, and Y. Peng, «Effect of annealing parameter on microstructure and magnetic properties of cold rolled non-oriented electrical steel, » Transactions of Nonferrous Metals Society of China, vol.17, pp.74-78, 2007.

J. and E. J. Bydzovsky, «Barkhausen noise as a function of grain size in non-oriented FeSi steel, Measurement, vol.46, pp.12-866, 2013.

E. Hug, O. Hubert, and M. Clavel, «Some aspects ofthe magnetomechanical coupling in the strengthening of nonoriented and grain-oriented 3% SiFe alloys, IEEE Transactions on Magnetics, vol.33, p.11, 1997.

V. Iordache, E. Hug, and N. Buiron, Magnetic behaviour versus tensile deformation mechanisms in a non-oriented Fe???(3 wt.%)Si steel, Materials Science and Engineering: A, vol.359, issue.1-2, pp.62-74, 2003.
DOI : 10.1016/S0921-5093(03)00358-7

P. Baudoin, Y. Houbaert, and S. Tumanski, Magnetic local investigations of non-oriented electrical steels after tensile deformation, Journal of Magnetism and Magnetic Materials, vol.254, issue.255, pp.254-255, 2003.
DOI : 10.1016/S0304-8853(02)00742-4

L. Makar and B. Tanner, «The in situ measurement of the effect of plastic deformation on the magnetic properties of steel Part I -Hysteresis loops and magnetostriction, Journal of Magnetism and Magnetic Materials, vol.184, pp.12-193, 1998.

E. Hug, O. Hubert, and J. , Van Houtte, «Effect of internal stresses on the magnetic properties of nonoriented Fe-3wt. %Si and (Fe, Co)-2wt. % V alloys, Materials Science and Engineering: A, vol.332, pp.11-193, 2002.

K. Ishikawa, Introduction to quality control, 1990.
DOI : 10.1007/978-94-011-7688-0

Y. L. Menach, Contribution à la modélisation numérique tridimensionnelle des systèmes électrotechniques, Thèse de doctorat, p.2, 1999.

T. Henneron, Contribution à la prise en compte des grandeurs globales dans les problèmes d'électromagnétisme résolus avec la méthode des éléments finis, Thèse de doctorat, p.2, 2004.

D. Harrison, L. D. Jones, and S. K. Burke, Benchmark problems for defect size and shape determination in eddy-current nondestructive evaluation, Journal of Nondestructive Evaluation, vol.39, issue.1, pp.21-34, 1996.
DOI : 10.1007/BF00733823

L. Valdes, Resistivity Measurements on Germanium for Transistors, Proceedings of the IRE, pp.420-427, 1954.
DOI : 10.1109/JRPROC.1954.274680

N. Afnor, Matériaux magnétiques Partie 13: Méthodes de mesure de la massse volumique, 2008.

F. M. Smits, Measurement of Sheet Resistivities with the Four-Point Probe, Bell System Technical Journal, vol.37, issue.3, pp.711-718, 1958.
DOI : 10.1002/j.1538-7305.1958.tb03883.x

Y. Lu, N. Bowler, J. Bowler, and Y. Huang, Edge effects in four-point direct current potential drop measurements on metal plates, Journal of Physics D: Applied Physics, vol.42, issue.13, p.113, 2009.
DOI : 10.1088/0022-3727/42/13/135004

F. Fiorillo and F. Mazaleyrat, Mesures magnétiques-Principes et production des champs magnétiques d1504, 2009.

F. Fiorillo and F. Mazaleyrat, Mesures magnétiques-Mesurage des propriétés magnétiques des matériaux d1505, 2009.

J. Sievert, The measurement of magnetic properties of electrical sheet steel ??? survey on methods and situation of standards, Journal of Magnetism and Magnetic Materials, vol.215, issue.216, pp.12-647, 2000.
DOI : 10.1016/S0304-8853(00)00251-1

L. Varga, «Challenges in optimizing the magnetic properties of bulk soft magnetic materials -Panel discussion, Journal of Magnetism and Magnetic Materials, vol.320, pp.2411-2422, 2008.

G. Loisos and A. J. , Critical evaluation and limitations of localized flux density measurements in electrical steels, IEEE Transactions on Magnetics, vol.37, issue.4, pp.2755-2757, 2001.
DOI : 10.1109/20.951297

A. M. Abouelyazied-abdallh, P. Sergeant, G. Crevecoeur, L. Vandenbossche, and L. , Dupré et M. Sablik, «Magnetic material identification in geometries with non-uniform electromagnetic fields using global and local magnetic measuremenets, pp.110-4157, 2009.

T. M. Zurek, «Analysis of twisting of search coil leads as a method reducing the influence of stray fields on accuracy of magnetic measurements,» Sensors and Actuators A: Physical, pp.12-569, 2008.

T. M. Zurek, «A novel capacitive flux density sensor,» Sensors and Actuators A: Physical, pp.121-125, 2006.

H. Pfützner, The Needle Method for Induction Tests: Sources of Error, IEEE Transactions on Magnetics, vol.40, issue.3, pp.1610-1616, 2004.
DOI : 10.1109/TMAG.2004.826617

K. Senda, M. Kurosawa, M. Ishida, M. Komatsubara, and T. Yamaguchi, Local magnetic properties in grain-oriented electrical steel measured by the modified needle probe method, Journal of Magnetism and Magnetic Materials, vol.215, issue.216, pp.12-136, 2000.
DOI : 10.1016/S0304-8853(00)00096-2

T. Nakata, Y. Kawase, and M. Nakano, «Improvement of measuring accuracy of magnetic field strength in single sgeet testers by using two H coils, IEEE Transactions on Magnetics, vol.23, pp.15-2596, 1987.

O. Stupakov, «Investigation of applicability of extrapolation method for sample fiel determination in single-yoke measuring setup, Journal of Magnetism and Magnetic Materials, vol.307, pp.12-279, 2006.

W. Rogowski and W. , Steinhaus, «Die messung der magnetischen Spannung (The measurements of magnetic potential, pp.141-150, 1912.

A. E. Mahdi and L. , Panina et D. Mapps, «Some new horizons in magnetic sensing: high-Tc SQUIDs, GMR and GMI materials,» Sensors and Actuators A: Physical, pp.13-271, 2003.

P. Ripka, «Advances in fluxgate sensors,» Sensors and Actuators A: Physical, pp.8-14, 2003.

F. Fiorillo and F. Mazaleyrat, Mesures magnétiques -Principes et production des champs magnétiques, 2009.

A. Msaed, Microcapteur magnétique de mesure de courant et traitement intégré, Thèse de doctorat, 2009.

H. Kikuchi, H. Murakami, and K. Ara, Feasibility study for nondestructive evaluation of magnetic properties and hardness of two-layered specimens by magnetic single-yoke probe, NDT & E International, vol.46, pp.1-6, 2012.
DOI : 10.1016/j.ndteint.2011.10.009

O. Stupakov, I. Tomas, and J. Kadlecova, Optimization of single-yoke magnetic testing by surface fields measurement, Journal of Physics D: Applied Physics, vol.39, issue.2, pp.12-248, 2006.
DOI : 10.1088/0022-3727/39/2/003

G. Vertesy and I. , Nondestructive magnetic characterization of TRIP steels, NDT & E International, vol.54, pp.107-114, 2013.
DOI : 10.1016/j.ndteint.2012.12.008

S. Tumanski and T. Bakon, Measuring system for two-dimensional testing of electrical steel, Journal of Magnetism and Magnetic Materials, vol.223, issue.3, pp.13-315, 2001.
DOI : 10.1016/S0304-8853(00)01332-9

S. Tumanski, «Investigations of the anisotropic behaviour of FeSi steel, Journal of Magnetism and Magnetic Materials, vol.254, issue.155, pp.50-53, 2003.

M. Enokizono, S. Fujiyama, H. Simoji, and J. Sievert, Localized distribution of two-dimensional magnetic properties in three-phase induction motor core model, Journal of Magnetism and Magnetic Materials, vol.215, issue.216, pp.772-775, 2000.
DOI : 10.1016/S0304-8853(00)00284-5

Z. Lin and J. Zhu, Three-dimensional magnetic properties of soft magnetic composite materials, Journal of Magnetism and Magnetic Materials, vol.312, issue.1, pp.158-163, 2007.
DOI : 10.1016/j.jmmm.2006.09.022

N. Bowler, Theory of four-point alternating current potential drop measurements on a metal half-space, Journal of Physics D: Applied Physics, vol.39, issue.3, pp.584-589, 2006.
DOI : 10.1088/0022-3727/39/3/024

J. R. Bowler and N. Bowler, Theory of four-point alternating current potential drop measurements on conductive plates, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.463, issue.2079, pp.817-836, 2007.
DOI : 10.1098/rspa.2006.1791

N. Bowler and Y. Huang, «Model-Based Characterization of Homogeneous Metal Plates by Four-Point Alternating Cureent Potential Drop Measurements, IEEE Transactions on Magnetics, vol.41, p.16, 2005.

N. Bowler, Model-based characterization of homogeneous metal plates by four-point alternating current potential drop measurements, IEEE Transactions on Magnetics, vol.41, issue.6, p.16, 2005.
DOI : 10.1109/TMAG.2005.847625

Z. Tang, Y. Le-menach, E. Creuse, S. Nicaise, F. Piriou et al., «Residual based a posteriori error estimators for harmonic A/Phi and T/Omega formulations in eddy current problems, IEEE Transactions on Magnetics, vol.49

O. Perevertov, Measurement of the surface field on open magnetic samples by the extrapolation method, Review of Scientific Instruments, vol.76, issue.10, 2005.
DOI : 10.1063/1.2084367

O. Perevertov, Increase of precision of surface magnetic field measurements by magnetic shielding, Measurement Science and Technology, vol.20, issue.5, p.15, 2009.
DOI : 10.1088/0957-0233/20/5/055107

E. Fayard, J. Albertini, M. Dominiak, and P. , Renaux et H. Joisten, «An integrated micropermeameter for soft magnetic microstructures measurements, IEEE Transactions on Magnetics, vol.33, pp.15-4017, 1997.

H. H. Gatzen, E. Andreeva, and H. Iswahjudi, Eddy-current microsensor based on thin-film technology, IEEE Transactions on Magnetics, vol.38, issue.5, pp.15-3368, 2002.
DOI : 10.1109/TMAG.2002.802289

M. Woytasik, J. Grandchamp, E. Dufour-gergam, S. M. Gilles, E. Martincic et al., Two- and three-dimensional microcoil fabrication process for three-axis magnetic sensors on flexible substrates, Sensors and Actuators A: Physical, vol.132, issue.1, pp.11-13, 2006.
DOI : 10.1016/j.sna.2006.06.062

W. Thomson, On the Electro-Dynamic Qualities of Metals:--Effects of Magnetization on the Electric Conductivity of Nickel and of Iron, Proceedings of the Royal Society of London, vol.8, issue.0, pp.546-550, 1857.
DOI : 10.1098/rspl.1856.0144

V. Matkova and T. Strapacova, Detection sensors for electromagnetic nondestructive evaluation, 2012 ELEKTRO, 2012.
DOI : 10.1109/ELEKTRO.2012.6225660

E. P. Harrison, G. L. Turney, H. Rowe, and H. Gollop, The Electrical Properties of High Permeability Wires Carrying Alternating Current, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.157, issue.891, pp.451-479, 1936.
DOI : 10.1098/rspa.1936.0208

M. Knobel and K. R. Pirota, Giant magnetoimpedance: concepts and recent progress, Journal of Magnetism and Magnetic Materials, vol.242, issue.245, pp.33-40, 2002.
DOI : 10.1016/S0304-8853(01)01180-5