I. Figure, Evolution de l'énergie dissipée moyenne par cycle (dans le grain le plus critique) en fonction du nombre de cycles pour la configuration non pré-écrouie (R01NP)

I. Figure, Evolution de l'énergie dissipée moyenne par cycle (dans le grain le plus critique) en fonction du nombre de cycles pour la configuration pré-écrouie (R01P)

I. Figure, Evolution de l'énergie dissipée moyenne par cycle (dans le grain le plus critique) en fonction du nombre de cycles pour la configuration pré-écrouie (R03P)

R. Asaro and A. Needleman, Overview no. 42 Texture development and strain hardening in rate dependent polycrystals, Acta Metallurgica, vol.33, issue.6, pp.923-953, 1985.
DOI : 10.1016/0001-6160(85)90188-9

C. Bathias and J. Baïlon, La fatigue des matériaux et des structures, 1997.

C. Bathias and A. Pineau, Fatigue of Materials and Structures. s.l, 2010.

V. Bennett and D. Mcdowell, Polycrystal orientation distribution effects on microslip in high cycle fatigue, International Journal of Fatigue, vol.25, issue.1, pp.27-39, 2003.
DOI : 10.1016/S0142-1123(02)00057-9

K. Berchem and M. Hocking, The influence of pre-straining on the corrosion fatigue performance of two hot-dip galvanised steels, Corrosion Science, vol.48, issue.12, pp.4094-4112, 2006.
DOI : 10.1016/j.corsci.2006.05.025

B. Berthel, A. Chrysochoos, B. Wattrisse, and A. Galtier, Infrared Image Processing for the Calorimetric Analysis of Fatigue Phenomena, Experimental Mechanics, vol.1, issue.2, pp.79-90, 2008.
DOI : 10.1007/s11340-007-9092-2
URL : https://hal.archives-ouvertes.fr/hal-00572333

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, pp.5-6, 1978.
DOI : 10.1016/0022-5096(78)90003-0

S. P. Bhat and M. E. Fine, Fatigue crack nucleation in iron and a high strength low alloy steel, Materials Science and Engineering: A, vol.314, issue.1-2, pp.90-96, 2001.
DOI : 10.1016/S0921-5093(00)01918-3

T. Billaudeau, Fatigue multiaxiale des matériaux à défauts : mécanismes et critère d'endurance, s.l.: Thèse de l, 2002.

W. Bleck and K. Phiu-on, Grain refinement and mechanical properties in advanced high strength sheet steels, The Joint International Conference of HSLA Steels 2005 and ISUGS 2005, p.50, 2005.

M. Bornert, T. Bretheau, and P. Gilormini, Homogénéisation en mécanique des matériaux, Matériaux aléatoires élastiques et milieux périodiques. s.l.:Hermès Science, traité MIM, série alliages métalliques, 2001.

T. Boulanger, A. Chrysocoos, C. Marbru, and A. Galtier, Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels, International Journal of Fatigue, vol.26, issue.3, 2004.
DOI : 10.1016/S0142-1123(03)00171-3

N. Broll, Caractérisation de solides cristallisés par diffraction X, 1996.

H. J. Bunge, Texture analysis in material, 1982.

J. Chaboche, Sur l'utilisation des variables d'état interne pour la description de la viscoplasticité cyclique avec endommagement. s.l., Symposium Franco, 1977.

H. Chai and C. Laird, Mechanisms of cyclic softening and cyclic creep in low carbon steel, Materials Science and Engineering, vol.93, pp.159-174, 1987.
DOI : 10.1016/0025-5416(87)90421-6

E. Charkaluk, A. Bignonnet, A. Constantinescu, and K. Dang-van, Fatigue design of structures under thermomechanical loadings, Fatigue & Fracture of Engineering Materials & Structures, issue.7, p.26, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00111365

E. Charkaluk and A. Constantinescu, An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron, Materials at high temperatures, pp.373-380, 2000.
DOI : 10.1016/S0142-1123(98)00027-9
URL : https://hal.archives-ouvertes.fr/hal-00141689

P. L. Charpentier, Post-forming monotonic and cyclic behavior in a HSLA steel sheet after large deformations by in-plane compression, International Journal of Fatigue, vol.79, pp.54-64, 2015.
DOI : 10.1016/j.ijfatigue.2015.04.003

A. Chrysochoos, Local energy analysis of high-cycle fatigue using digital image correlation and infrared thermography. The Journal of Strain Analysis for Engineering Design, pp.411-421, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00514562

A. Chrysochoos and H. Louche, An infrared image processing to analyse the calorific effects accompanying strain localisation, International Journal of Engineering Science, vol.38, issue.16, pp.1759-1788, 2000.
DOI : 10.1016/S0020-7225(00)00002-1

Y. Chung and W. Lee, Cyclic plastic strain energy as a damage criterion and environmental effect in Nb-bearing high strength, low alloy steel, Materials Science and Engineering: A, vol.186, issue.1-2, pp.121-128, 1994.
DOI : 10.1016/0921-5093(94)90310-7

A. I. Committee, High-Strength Structural and High-Strength Low-Alloy Steels, Properties and Selection: Irons, Steels, and High-Performance Alloys, 1990.

C. Cooper and . M. Fine, Fatigue microcrack initiation in polycrystalline alpha-iron with polished and oxidized surfaces, Metallurgical Transactions A, vol.10, issue.4, pp.641-649, 1985.
DOI : 10.1007/BF02814238

J. Cordebois and F. Sidoroff, Anisotropie élastique induite par endommagement.. s.l, 1979.

B. Crossland, Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel. Institution of Mechanical Engineers London, Proc. Int. Conf. on Fatigue of Metals, 1956.

D. Van and K. , Sur la résistance à la fatigue des matériaux, s.l.: PhD, 1971.

D. Van and K. , Sur la résistance à la fatigue des matériaux, s.l.: PhD, 1973.

K. Dang-van, Macro-Micro Approach in High-Cycle Multiaxial Fatigue, 1993.
DOI : 10.1520/STP24799S

C. Déprés, C. Robertson, and M. Fivel, Low-strain fatigue in 316L steel surface grains: a three dimension discrete dislocation dynamics modelling of the early cycles. Part 2: Persistent slip markings and micro-crack nucleation, Philosophical Magazine, vol.8, issue.1, pp.79-97, 2006.
DOI : 10.1016/S0142-1123(97)00005-4

R. Desmorat, A. Kane, M. Seyedi, and J. Sermage, Two scale damage model and related numerical issues for thermo-mechanical High Cycle Fatigue, European Journal of Mechanics - A/Solids, vol.26, issue.6, pp.909-935, 2007.
DOI : 10.1016/j.euromechsol.2007.01.002
URL : https://hal.archives-ouvertes.fr/hal-00169928

C. Doudard, Identification of the scatter in high cycle fatigue from temperature measurements, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00002927

C. Doudard, Determination of an HCF criterion by thermal measurements under biaxial cyclic loading, International Journal of Fatigue, vol.29, issue.4, pp.748-757, 2007.
DOI : 10.1016/j.ijfatigue.2006.06.009
URL : https://hal.archives-ouvertes.fr/hal-00322198

F. Dunne, A. Walker, and D. Rugg, Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: Application to cold-dwell fatigue in Ti alloys, International Journal of Plasticity, vol.23, issue.6, pp.1061-1083, 2007.
DOI : 10.1016/j.ijplas.2006.10.013

J. Eshelby, The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proc. R. Soc. Lond. A, pp.376-396, 1957.

L. Flaceliere, F. Morel, and A. Dragon, Coupling between mesoplasticity and damage in highcycle fatigue, International Journal of Damage Mechanics, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00571160

K. Fredriksson, A. Melander, and M. Hedman, Influence of prestraining and ageing on fatigue properties of high-strength sheet steels, International Journal of Fatigue, vol.10, issue.3, pp.139-151, 1988.
DOI : 10.1016/0142-1123(88)90056-4

H. Gadouini, Y. Nadot, and C. Rebours, Influence of mean stress on the multiaxial fatigue behaviour of defective materials, International Journal of Fatigue, vol.30, issue.9, pp.1623-1633, 2008.
DOI : 10.1016/j.ijfatigue.2007.11.010

A. Galtier, O. Bouaziz, and A. Lambert, Influence de la microstructure des aciers sur leur propriétés mécaniques, Mécanique & Industries, vol.3, issue.5, pp.457-462, 2002.

T. Gladman, The Physical Metallurgy of Microalloyed Steels))) éd, Book (Institute of Materials, 2002.

M. Grumbach, Aciers microalliés. Techniques de l'ingénieur Propriétés et usages des aciers et des fontes, base documentaire : TIB349DUO.(ref. article : m4525), 2000.

A. Gustavsson, M. Larsson, and A. Meland, Fatigue life of pressed steel sheet components, -9), pp.613-619, 1997.
DOI : 10.1016/S0142-1123(97)00073-X

E. O. Hall, The Deformation and Ageing of Mild Steel: III Discussion of Results, Proceedings of the Physical Society. Section B, pp.747-753, 1951.
DOI : 10.1088/0370-1301/64/9/303

B. Halphen and Q. Nguyen, Sur les matériaux standards généralisés, J. Méc, vol.14, pp.39-63, 1975.

S. Harren, The finite deformation of rate-dependent polycrystals???I. A self-consistent framework, Journal of the Mechanics and Physics of Solids, vol.39, issue.3, pp.345-383, 1991.
DOI : 10.1016/0022-5096(91)90017-I

R. Hielscher and H. Schaeben, algorithm, Journal of Applied Crystallography, vol.41, issue.6, pp.1024-1037, 2008.
DOI : 10.1107/S0021889808030112

N. Huyen, L. Flacelière, and F. Morel, A critical plane fatigue model with coupled mesoplasticity and damage. Fatigue and Fracture of Engineering Materials and Structures, pp.12-28, 2008.

W. G. Johnston and J. J. Gilman, Dislocation Velocities, Dislocation Densities, and Plastic Flow in Lithium Fluoride Crystals, Journal of Applied Physics, vol.30, issue.2, pp.129-144, 1959.
DOI : 10.1063/1.1735121

J. Kaleta, Determination of cold work energy in LCF/HCF region, Proc. of 4th Int. Conf. on LCF and Elasto-Plastic Behaviour of Materials, Garmisch-Partenkirchen, pp.93-98, 1998.
DOI : 10.1016/B978-008043326-4/50021-0

M. Kang, Y. Aono, and H. Noguchi, Effect of prestrain on and prediction of fatigue limit in carbon steel, International Journal of Fatigue, vol.29, issue.9-11, pp.9-11, 2007.
DOI : 10.1016/j.ijfatigue.2007.01.024

A. M. Korsunsky, D. Dini, F. P. Dunne, and M. J. Walsh, Comparative assessment of dissipated energy and other fatigue criteria???, International Journal of Fatigue, vol.29, issue.9-11, pp.1990-1995, 2007.
DOI : 10.1016/j.ijfatigue.2007.01.007

E. Kröner, Zur plastischen verformung des vielkristalls, Acta Metallurgica, vol.9, issue.2, pp.155-161, 1961.
DOI : 10.1016/0001-6160(61)90060-8

S. Kruch, N. Carrère, and J. Chaboche, Fatigue damage analysis of unidirectional metal matrix composites, International Journal of Fatigue, vol.28, issue.10, pp.1420-1425, 2006.
DOI : 10.1016/j.ijfatigue.2006.02.023

L. Rosa, G. Risitano, and A. , Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components, International Journal of Fatigue, vol.22, issue.1, pp.65-73, 2000.
DOI : 10.1016/S0142-1123(99)00088-2

H. Ledbetter, Polycrystalline elastic constants of in situ cementite (Fe3C), Materials Science and Engineering: A, vol.527, issue.10-11, pp.2657-2661, 2010.
DOI : 10.1016/j.msea.2009.12.034

J. Lemaitre, A course on damage mechanics. 2e éd, 1996.

J. Lemaitre and J. Chaboche, Aspect phénoménologique de la rupture par endommagement, J, 1978.

J. Lemaitre, J. Sermage, and R. Desmorat, A two scale damage concept applied to fatigue, International Journal of Fracture, vol.97, issue.1/4, pp.67-81, 1999.
DOI : 10.1023/A:1018641414428

P. Lesne and S. Savalle, An efficient cycles jump technique for viscoplastic structure calculations involving large number of cycles, plasticity : Models, Software and Applications, 1989.

G. Libertiny, T. Topper, and B. Leis, The effect of large prestrains on fatigue, Experimental Mechanics, vol.3, issue.2, pp.64-68, 1977.
DOI : 10.1007/BF02326428

H. Louche and A. Chrysochoos, Thermal and dissipative effects accompanying L??ders band propagation, Materials Science and Engineering: A, vol.307, issue.1-2, pp.15-22, 2001.
DOI : 10.1016/S0921-5093(00)01975-4

P. Luká? and L. Kunz, Cyclic plasticity and substructure of metals, Materials Science and Engineering: A, vol.322, issue.1-2, pp.217-227, 2002.
DOI : 10.1016/S0921-5093(01)01132-7

M. P. Luong, Fatigue limit evaluation of metals using an infrared thermographic technique, Mechanics of Materials, vol.28, issue.1-4, pp.155-163, 1998.
DOI : 10.1016/S0167-6636(97)00047-1
URL : https://hal.archives-ouvertes.fr/hal-00111598

C. Mareau, Modélisation micromécanique de l'échauffement et de la microplasticité des aciers sous sollicitations cycliques, s.l, 2007.

C. Mareau and S. Berbenni, An affine formulation for the self-consistent modeling of elasto-viscoplastic heterogeneous materials based on the translated field method, International Journal of Plasticity, vol.64, pp.134-150, 2015.
DOI : 10.1016/j.ijplas.2014.08.011

C. Mareau, D. Cuillerier, and F. Morel, Experimental and numerical study of the evolution of stored and dissipated energies in a medium carbon steel under cyclic loading, Mechanics of Materials, vol.60, pp.93-106, 2013.
DOI : 10.1016/j.mechmat.2013.01.011
URL : https://hal.archives-ouvertes.fr/hal-00821795

C. Mareau, V. Favier, B. Weber, and A. Galtier, Influence of the free surface and the mean stress on the heat dissipation in steels under cyclic loading, International Journal of Fatigue, vol.31, issue.8-9, pp.31-1407, 2009.
DOI : 10.1016/j.ijfatigue.2009.03.022
URL : https://hal.archives-ouvertes.fr/hal-00371739

C. Mareau, Micromechanical modeling of the interactions between the microstructure and the dissipative deformation mechanisms in steels under cyclic loading, International Journal of Plasticity, vol.32, issue.33, pp.106-120, 2012.
DOI : 10.1016/j.ijplas.2011.12.004

E. Marin and P. Dawson, On modelling the elasto-viscoplastic response of metals using polycrystal plasticity, Computer Methods in Applied Mechanics and Engineering, vol.165, issue.1-4, pp.1-21, 1998.
DOI : 10.1016/S0045-7825(98)00034-6

R. Masson and A. Zaoui, Self-consistent estimates for the rate-dependentelastoplastic behaviour of polycrystalline materials, Journal of the Mechanics and Physics of Solids, vol.47, issue.7, pp.1543-1568, 1999.
DOI : 10.1016/S0022-5096(98)00106-9

D. Mcdowell, Simulation-based strategies for microstructure-sensitive fatigue modeling, Materials Science and Engineering: A, vol.468, issue.470, pp.468-470, 2007.
DOI : 10.1016/j.msea.2006.08.129

S. Mercier and A. Molinari, Homogenization of elastic???viscoplastic heterogeneous materials: Self-consistent and Mori-Tanaka schemes, International Journal of Plasticity, vol.25, issue.6, pp.1024-1048, 2009.
DOI : 10.1016/j.ijplas.2008.08.006

L. Méric and G. Cailletaud, Single Crystal Modeling for Structural Calculations: Part 2???Finite Element Implementation, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.171-182, 1991.
DOI : 10.1115/1.2903375

A. Mittal, High strength low alloy (HSLA) steels for cold forming. [En ligne] Available at: http://automotive.arcelormittal.com/europe, 2015.

V. Monchiet, E. Charkaluk, and D. Kondo, Plasticity-damage based micromechanical modelling in high cycle fatigue. C R Mécanique, pp.129-136, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00021651

F. N. Morel and N. Huyen, Plasticity and damage heterogeneity in fatigue, Theoretical and Applied Fracture Mechanics, pp.98-127, 2008.
DOI : 10.1016/j.tafmec.2007.10.006

R. Munier, Etude de la fatigue des aciers laminés à partir de l'autoéchauffement sous sollicitation cyclique : essais, observations, modélisation et influence d'une pré-déformation plastique, s.l, 2012.

R. Munier, C. Doudard, S. Calloch, and B. Weber, Determination of high cycle fatigue properties of a wide range of steel sheet grades from self-heating measurements, International Journal of Fatigue, vol.63, pp.46-61, 2014.
DOI : 10.1016/j.ijfatigue.2014.01.004
URL : https://hal.archives-ouvertes.fr/hal-00967431

T. Mura, A theory of fatigue crack initiation, Materials Science and Engineering: A, vol.176, issue.1-2, pp.61-70, 1994.
DOI : 10.1016/0921-5093(94)90959-8

.. Y. Nagase and S. Suzuki, On the Decrease of Fatigue Limit Due to Small Prestrain, Journal of Engineering Materials and Technology, vol.114, issue.3, 1992.
DOI : 10.1115/1.2904179

K. Nakajima, S. Kamiishi, M. Yokoe, and T. Miyata, The Influence of Microstructural Morphology and Prestrain on Fatigue Crack Propagation of Dual-phase Steels in the Near-threshold Region., ISIJ International, vol.39, issue.5, pp.486-492, 1999.
DOI : 10.2355/isijinternational.39.486

M. Nau, Mesure électique de la température avec des thermocouples et des sondes à résistance, s.l, 2003.

S. Nemat-nasser, T. Okinaka, and L. Ni, A physically-based constitutive model for bcc crystals with application to polycrystalline tantalum, Journal of the Mechanics and Physics of Solids, vol.46, issue.6, pp.1009-1038, 1998.
DOI : 10.1016/S0022-5096(97)00064-1

I. Papadopoulos, A new criterion of fatigue strength for out-of-phase bending and torsion of hard metals, International Journal of Fatigue, vol.16, issue.6, pp.377-384, 1994.
DOI : 10.1016/0142-1123(94)90449-9

A. Paquin, H. Sabar, and M. Berveiller, Integral formulation and self-consistent modelling of elastoviscoplastic behavior of heterogeneous materials, Archive of Applied Mechanics (Ingenieur Archiv), vol.69, issue.1, pp.14-35, 1999.
DOI : 10.1007/s004190050201

E. Pessard, F. Morel, and A. Morel, Prise en compte du r??le des inclusions non m??talliques dans le comportement anisotrope en fatigue d???aciers forg??s, Revue de M??tallurgie, vol.107, issue.10-11, pp.10-11, 2010.
DOI : 10.1051/metal/2011006

N. J. Petch, The cleavage strength of polycrystals, J. Iron Steel Inst, vol.174, pp.25-28, 1953.

M. Poncelet, Probabilistic multiscale models and measurements of self-heating under multiaxial high cycle fatigue, Journal of the Mechanics and Physics of Solids, vol.58, issue.4, 2010.
DOI : 10.1016/j.jmps.2010.01.003
URL : https://hal.archives-ouvertes.fr/hal-00453966

C. Przybyla, R. Prasannavenkatesan, N. Salajegheh, and D. Mcdowell, Microstructure-sensitive modeling of high cycle fatigue, International Journal of Fatigue, vol.32, issue.3, pp.512-525, 2010.
DOI : 10.1016/j.ijfatigue.2009.03.021

G. Qiang, An energy method for rapid evaluation of high-cycle fatigue parameters based on intrinsic dissipation, International Journal of Fatigue, vol.80, pp.136-144, 2015.

E. Repetto and M. Ortiz, A micromechanical model of cyclic deformation and fatigue-crack nucleation in f.c.c. single crystals, Acta Materialia, vol.45, issue.6, pp.2577-2595, 1997.
DOI : 10.1016/S1359-6454(96)00368-0

F. N. Rhines and B. P. Patterson, Effect of the degree of prior cold work on the grain, Metall. Trans. A, issue.6, p.13, 1982.

C. Robert and C. Mareau, A comparison between different numerical methods for the modeling of polycrystalline materials with an elastic???viscoplastic behavior, Computational Materials Science, vol.103, pp.134-144, 2015.
DOI : 10.1016/j.commatsci.2015.03.028

H. Roven and E. Nes, Cyclic deformation of ferritic steel???I. Stress-strain response and structure evolution, Acta Metallurgica et Materialia, vol.39, issue.8, pp.1719-1733, 1991.
DOI : 10.1016/0956-7151(91)90141-M

K. Sai, Modèles à grand nombre de variables internes et méthodes numériques associées, 1993.

M. Sauzay and T. Jourdan, Polycrystalline microstructure, cubic elasticity, and nucleation of high-cycle fatigue cracks, International Journal of Fracture, vol.29, issue.3-4, pp.3-4, 2006.
DOI : 10.1007/s10704-006-9005-x

R. Seghir, A thermomechanical analysis of the localization process at the microstructure scale of a 316L stainless steel, Procedia Engineering, vol.10, pp.3596-3601, 2011.
DOI : 10.1016/j.proeng.2011.04.591

A. Sherman, Fatigue properties of high strength-low alloy steels, Metallurgical Transactions A, vol.28, issue.1, pp.1035-1040, 1975.
DOI : 10.1007/BF02661357

G. Simmons and H. Wang, Single Crystal Elastic Constants and Calculated Aggregate Properties: A Handbook. 2e éd, 1971.

G. Sines, Behaviour of metals under complex static and alternating stresses. Metal fatigue, pp.145-169, 1959.

S. Sinha and S. Ghosh, Modeling cyclic ratcheting based fatigue life of HSLA steels using crystal plasticity FEM simulations and experiments, International Journal of Fatigue, vol.28, issue.12, pp.1690-1704, 2006.
DOI : 10.1016/j.ijfatigue.2006.01.008

R. Skelton, Energy criterion for high temperature low cycle fatigue failure, Materials Science and Technology, vol.1, issue.5, pp.427-440, 1991.
DOI : 10.1115/1.3265565

C. Sommer, H. Mughrabi, and D. Lochner, Influence of temperature and carbon content on the cyclic deformation and fatigue behaviour of ??-iron. Part II: Crack initiation and fatigue life, Acta Materialia, vol.46, issue.5, pp.1537-1546, 1998.
DOI : 10.1016/S1359-6454(97)00363-7

S. Suresh, Fatigue of materials.. 2e éd. Cambridge (UK), 1998.

C. Sweeney, The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation, Journal of the Mechanics and Physics of Solids, vol.61, issue.5, pp.1224-1240, 2013.
DOI : 10.1016/j.jmps.2013.01.001

J. H. Ter-heege, J. H. De-bresser, and C. J. Spiers, Composite flow laws for crystalline materials with lognormally distributed grain size: theory and application to olivine, J. Struct. Geol, vol.26, 2004.

U. F. Kocks and C. T. , Texture and Anisotropy, Preferred Orientations in Polycrystals and their Effect on Materials Properties. s.l.:Cambridge, 2000.

T. Uemura, A FATIGUE LIFE ESTIMATION OF SPECIMENS EXCESSIVELY PRESTRAINED IN TENSION, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.21, issue.2, pp.151-158, 1998.
DOI : 10.1046/j.1460-2695.1998.00223.x

S. Vervynckt, K. Verbeken, B. Lopez, and J. Jonas, Modern HSLA steels and role of non-recrystallisation temperature, International Materials Reviews, vol.67, issue.7, pp.187-207, 2012.
DOI : 10.1016/j.matdes.2004.03.009

L. Vincent, On the ability of some cyclic plasticity models to predict the evolution of stored energy in a type 304L stainless steel submitted to high cycle fatigue, European Journal of Mechanics - A/Solids, vol.27, issue.2, pp.161-180, 2008.
DOI : 10.1016/j.euromechsol.2007.05.005

Q. H. Vu, Fatigue polycyclique multiaxiale de l'acier C35 : caractérisation et modélisation des mécanismes d'endommagement, s.l, 2009.

V. Wan, D. Maclachlan, and F. Dunne, A stored energy criterion for fatigue crack nucleation in polycrystals, International Journal of Fatigue, vol.68, pp.90-102, 2014.
DOI : 10.1016/j.ijfatigue.2014.06.001

J. Warren and D. Wei, A microscopic stored energy approach to generalize fatigue life stress ratios, International Journal of Fatigue, vol.32, issue.11, pp.1853-1861, 2010.
DOI : 10.1016/j.ijfatigue.2010.05.003

G. Welter, Essais d'endurance par traction et compression, Wiadomo?ci Instytutu Metalurgii i Metaloznawstwa, pp.30-39, 1937.

G. Weng, Self-Consistent Determination of Time-Dependent Behavior of Metals, Journal of Applied Mechanics, vol.48, issue.1, pp.41-46, 1981.
DOI : 10.1115/1.3157590

C. L. Xie, S. Ghosh, and M. Groeber, Modeling Cyclic Deformation of HSLA Steels Using Crystal Plasticity, Journal of Engineering Materials and Technology, vol.126, issue.4, pp.339-352, 2004.
DOI : 10.1115/1.1789966

F. Yoshida, A constitutive model of cyclic plasticity, International Journal of Plasticity, vol.16, issue.3-4, pp.359-380, 2000.
DOI : 10.1016/S0749-6419(99)00058-3