. Slabber-À-couteaux-en-spirale...., Source : http ://www.se-saws.com), p.12

S. Tamis-utilisé-dans-la-norme, 01 (D'après [SCAN-CM 40 01, p.15

D. Définition-de-b and D. , C w et C t dans le cas sur surfaçage avec un slabber, p.127

. Lessiveur-pour-le-défibrage-chimique........, Source : www.vega.fr), p.162

.. Young, Géométrie des éprouvettes pour les essais sur le module d, p.48

L. .. Résultats-de, ANOVA taux de déformation -état de l'eau (Radiale), p.71

M. .. Bragov and A. K. Lomunov, Dynamic properties of Some Wood Species, Le Journal de Physique IV, vol.07, issue.C3, pp.3-487, 1997.
DOI : 10.1051/jp4:1997384
URL : https://hal.archives-ouvertes.fr/jpa-00255541

A. M. Bragov, A. K. Lomunov, I. V. Sergeichev, G. T. Gray, and I. , Dynamic Behaviour of Birch and Sequoia at High Strain Rates, AIP Conference Proceedings, pp.1511-1514, 2002.
DOI : 10.1063/1.2263611

]. J. Buchanan-63, T. S. Buchanan, and . Duchnicki, Some experiments in low-speed chipping . Pulp and Paper Magazine of Canada, pp.235-245, 1963.

J. Buchar, S. Rolc, J. Lisy, and J. Schwengmeier, Model of the wood response to the high velocity of loading, Proceedings of the 19th International Symposium of Ballistics, pp.1447-1453, 2001.

C. B. Cáceres-15-]-c, R. Cáceres, A. Hernández, and . Koubaa, Effects of log position in the stem and cutting width on chipper-canter black spruce chips, Proceedings of the 22th International Wood Machining Seminar, 2015. [Chakravarty 10] Uttam Kumar Chakravarty. An investigation on the dynamic response of polymeric, metallic, and biomaterial foams. Composite structures, pp.922339-2344, 2010.

]. J. Charles and D. André, Formation DEM-GranOO. Prise en main de la plate-forme GranOO, Arts et Métiers ParisTech, p.2, 2013.

W. Chen, F. Lu, D. J. Frew, and M. J. , Dynamic Compression Testing of Soft Materials, Journal of Applied Mechanics, vol.69, issue.3, pp.214-223, 2002.
DOI : 10.1115/1.1464871

]. W. Chen and B. Song, Split Hopkinson (Kolsky) Bar, 2011.
DOI : 10.1007/978-1-4419-7982-7

]. L. Chevalier, Y. M. Luo, E. Monteiro, and G. H. Menary, On visco-elastic modelling of polyethylene terephthalate behaviour during multiaxial elongations slightly over the glass transition temperature, Mechanics of Materials, vol.52, pp.103-116, 2012.
DOI : 10.1016/j.mechmat.2012.05.003
URL : https://hal.archives-ouvertes.fr/hal-00773160

]. C. Coetzee and D. N. Els, Calibration of discrete element parameters and the modelling of silo discharge and bucket filling. Computers and electronics in agriculture, pp.198-212, 2009.

]. S. Kuljich-13a, J. Kuljich, R. E. Cool, S. Hernandez, R. E. Kuljich et al., Evaluation of two surfacing methods on black spruce wood in relation to gluing performance, Journal of Wood Science, vol.44, issue.5, pp.185-194196, 2013.
DOI : 10.1007/s10086-012-1318-y

D. Lachenal, Advanced course on Alkaline Pulping, INP Pagora, 2011.

D. Lachenal, Advanced course on Mechanical Pulping, INP Pagora, 2011.

B. Laganière, Effect of canter head rotation speed, log feed speed and vertical position of logs on lumber surface and chip quality, Forintek Canada Corp, 2004.

B. Laganière, Effect of knife velocity, knife bite and number of knives on lumber surface and chip quality in chipper-canter using bent knifes and disposable knifes (Phase III) Rapport technique, 2006.

]. U. Lindholm and L. M. Yeakley, High strain-rate testing : Tension and compression Strain, strain rate and velocity fields determination at very high cutting speed, List 13] G. List, pp.321-3301, 1968.

P. Lorong, Barres de Hopkinson : approche élémentaire. Rapport technique, 2006.

P. Lorong, I. Linares, and X. Wang, Banc de cisaillage. Etude "analytique" de cas types, 2007.

H. Lusth, P. A. Gradin, and L. M. Hellström, The dependency of energy consumption on cutting angles in the canter chipping process, Nordic Pulp & Paper Research Journal, vol.27, issue.5, pp.886-889, 2012.

M. Maigre, L. Bigorgne, and M. Brunet, Effets du chargement et de la microstructure sur la propagation de fissures dans le plan transverse d'un bois résineux. 21ème Congrès Français de Mécanique, p.2013, 2013.

J. Mairesse, Modélisation numérique du comportement rhéologique du bois soumis á une large gamme de vitesse de déformation : application au liège et au balsa, Thèse de doctorat, 2010.

]. W. Mckenzie-60a and . Mckenzie, Fondamental aspect of the wood cutting process. Forest Products Journal Fundamental analysis of the wood cutting process, Thèse de doctorat, pp.447-456, 1960.

W. M. Mckenzie, The relationship between the cutting properties of wood and it's physical and mechanical properties, Forest Products Journal, pp.287-294, 1962.

]. T. Mclauchlan and J. A. Lapointe, Production of chips by disc chippers. Pulp and Paper Technology. Chip quality monograph, 1979.

N. Moës, J. Dolbow, and T. Belytschko, A finite element method for crack growth without remeshing, International Journal for Numerical Methods in Engineering, vol.46, issue.1, pp.131-150, 1999.
DOI : 10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.3.CO;2-A

M. Neumann, J. Herter, B. O. Droste, and S. Hartwig, Introduction to high strain rate testing Mechanical Testing and Evaluation Compressive behaviour of axially loaded spruce wood under large deformations at different strain rates, ASM Handbook, pp.427-428, 2000.

M. Ohta and B. Kawasaki, The effect of cutting speed on the surface quality in wood cutting, Proceedings of the 12th International Wood Machining SeminarOrlowski 13] K.A. Orlowski, T. Ochrymiuk, A. Atkins et D. Chuchala. Application of fracture mechanics for energetic effects predictions while wood sawing, pp.56-62, 1995.

S. R. Reid, C. Peng, M. Renaud, M. Rueff, and A. C. Rocaboy, Dynamic uniaxial crushing of wood Mechanical behaviour of saturated wood under compression : Part 1. behaviour of wood at high rates of strain, BIBLIOGRAPHIE International Journal of Impact Engineering Wood Science and Technology, vol.19, issue.303, pp.5-6, 1996.

R. , ]. M. Renaud, M. Rueff, and A. C. Rocaboy, Mechanical behaviour of saturated wood under compression part 2 : Behaviour of wood at low rates of strain some effects of compression on wood structure, Wood Science and Technology, vol.30, issue.4, pp.237-243, 1996.

R. L. Sadler, M. Sharpe, R. Panduranga, and K. Shivakumar, Water immersion effect on swelling and compression properties of Eco-Core, PVC foam and balsa wood, Composite Structures, vol.90, issue.3, pp.330-336, 2009.
DOI : 10.1016/j.compstruct.2009.03.016

A. Savitzky and M. J. Golay, Smoothing and Differentiation of Data by Simplified Least Squares Procedures., Analytical Chemistry, vol.36, issue.8, pp.1627-1639, 1964.
DOI : 10.1021/ac60214a047

T. Sawada and M. Ohta, Simulation of the wood cutting parallel or perpendicular to the grain by Extended Distinct Element Method, Proceedings of the 12th International Wood Machining SeminarSCAN-CM 39 94] SCAN-CM 39. Wood Chips for Pulp Production -Dry matter content. Paper and board Testing Commitee, pp.49-55, 1994.

M. Skarvelis and G. I. Mantanis, Physical and mechanical properties of beech wood harvested in the greek public forests, Wood Research, vol.58, issue.1, pp.123-129, 2013.

H. C. Spatz and J. Pfisterer, Mechanical properties of green wood and their relevance for tree risk assessment. Arboriculture and Urban Forestry, pp.218-225, 2013.

T. Stevanovic and D. Perrin, Chimie du bois, 2009.

H. Sugiyama, On the effect of the loading time on the strength properties of wood, Wood Science and Technology, vol.1, issue.4, pp.289-303, 1967.
DOI : 10.1007/BF00349760