]. B. Alexandreanu2003, G. S. Alexandreanu, . Wasalexandreanu2005-]-b, O. K. Alexandreanu, W. J. Chopra et al., Grain boundary deformation-induced intergranular stress corrosion cracking of Ni-16Cr-9Fe in 360°C water The effect of grain orientation on the cracking behavior of Alloy 182 in PWR environment, Proceedings of the 12th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors, pp.2012-705, 2003.

]. L. Allais1994, M. Allais, T. Bornert, D. Bretheau, and . Caldemaison, Experimental characterization of the local strain field in a heterogeneous elastoplastic material, Acta Metallurgica et Materialia, vol.42, issue.11, pp.3865-3880, 1994.
DOI : 10.1016/0956-7151(94)90452-9

]. C. Amzallag2001, J. Amzallag, C. Boursier, C. Pagès, and . Gimond, Stress corrosion life assessment of 182 and 82 welds used in PWR components, Proceedings of the 10th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors, 2001.

]. S. Attanasio2003, D. S. Attanasio, W. Morton, J. Bamford, P. J. Hall-allen et al., Measurement of Nickel/Nickel oxide transition in Ni-Cr-Fe alloys and updated data and correlations to quantify the effect of aqueous hydrogen on primary water SCC Cracking of A600 nozzles and welds in PWRs : review of cracking events and repair service experience Three-dimensional characterization of strain localization bands in high-resolution elastoplastic polycrystals, Proceedings of the 11th International Conference on Environmental Degradation of Materials in Nuclear Power Systems?Water Reactors Proceedings of the 12th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors Mechanics research communications, pp.762-768, 2003.

]. G. Bertali2015, F. Bertali, P. Scenini, M. G. Gilles, and . Burke, Solution annealed and thermally treated alloy 600 preferential intergranular oxidation: a comparison, Proceedings of the 17th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors, p.2015

]. T. Bieler2005, A. Bieler, B. C. Fallahi, D. Ng, M. A. Kumar et al., Fracture initiation/propagation parameters for duplex TiAl grain boundaries based on twinning, slip, crystal orientation, and boundary misorientation, Intermetallics, vol.13, issue.9, pp.979-984, 2005.
DOI : 10.1016/j.intermet.2004.12.013

M. Bioulac, M. F. Cipière, G. Poudroux, F. Champigny, L. Mercier et al., Gains apportés par le changement du matériau dans les générateurs de vapeur et les couvercles de cuve des REP : passage de l'Alliage 600 à l'Alliage 690 Evaluation expérimentale et numérique des contraintes résiduelles dans les structures soudées en multipasse, Nouvelles technologies, nouvelles compétences au service des centrales nucléaires en exploitation Thèse Morphologie microstructurale et comportement mécanique ; caractérisations expérimentales, approches par bornes et estimations autocohérentes généralisées Thèse, Ecole Nationale des Ponts et Chaussées, pp.179-188, 1996.

]. J. Boursier2005, T. Boursier, F. Couvant, B. Vaillant, and . Yrieix, A Review of PWSCC, weldability and thermal ageing of nickel weld metals in PWR primary water, International PWSCC of Alloy 600 Conference and Exhibit Show, 2005.

]. D. Bouscaud2012 and . Bouscaud, Développement de la microdiffraction Kossel pour l'analyse des déformations et contraintes à l'échelle du micromètre : applications à des matériaux cristallins, Thèse, Ecole Nationale Supérieure d'Arts et métiers, p.2012

]. D. Buisine1994, F. Buisine, P. Vaillant, C. Vidal, and . Gimond, PWSCC resistance of nickel based weld metals with various chromium contents " , EPRI Workshop on PWSCC of Alloy 600 in PWRs Une approche micromécanique phénoménologique du comportement inélastique des métaux Stress corrosion crack initiation of Alloy 182 weld metal in primary coolant: influence of chemical composition, Thèse Proceedings of Fontevraud VII, Contribution of materials investigations to improve the safety and performance of LWRs, 1987.

]. T. Cassagne1997, B. Cassagne, F. Fleury, O. Vaillant, P. De-bouvier et al., An update on the influence of hydrogen on the PWSCC of nickel base alloys in high temperature water Soudage à l'arc " , Techniques de l'ingénieur, B 7730 Degradation of a Ni-Cr-Fe alloy in a pressurised-water nuclear power plant Oxidation of Alloy 82 in nominal PWR primary water at 340°C and in hydrogenated steam at 400°C SCC crack initiation in nickel based alloy welds in hydrogenated steam at 400°C, Proceedings of the 8th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors Proceedings of Nuclear Plant Chemistry conference Proceedings of the 17 th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors On the criteria for slip transmission across interfaces in polycrystals Scripta Metallurgica et Materialia, pp.307-315, 1992.

]. H. Coriou1959, L. Coriou, Y. L. Grall, S. Gall, and . Vettier, Corrosion fissurante sous contrainte de l'Inconel dans l'eau à haute température -Stress corrosion cracking of Inconel in high temperature water, p.3, 1959.

T. Couvant and F. Vaillant, Initiation of PWSCC of weld alloy 182 The role of grain boundary misorientation in intergranular cracking of Ni-16Cr-9Fe in 360°C argon and high-purity water, Proceedings of the 15 th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors Metallurgical transactions, pp.1141-1151, 1992.

[. Cunat, Aciers inoxydables -Mise en oeuvre, 2000.

]. S. David2003, S. S. David, J. M. Babu, . Vitek-]-i, O. De-curières et al., Welding: Solidification and microstructure, Proceedings of Fontevraud VII Proceedings of the 12th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors, pp.14-20, 2003.
DOI : 10.1007/s11837-003-0134-7

]. T. Devine2011 and . Devine, Influence of primary water chemistry on oxides formed on Alloy 600 and Alloy 690 Microextensométrie locale par corrélation d'images numériques, Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors Thèse, Ecole Polytechnique, pp.967-992, 2000.

]. K. Dozaki2010, D. Dozaki, N. Akutagawa, H. Nagata, K. Takiguchi et al., Effect of dissolved hydrogen content in PWR primary water on PWSCC initiation property, E-Journal of Advanced Maintenance, vol.2, pp.65-76, 2010.

]. L. Duisabeau2010, D. Duisabeau, Y. Deforge, M. Thebault, E. Stindel et al., EDF Field experience of 182 J-Groove welds on CRDMs and SG channel head nozzles, Proceedings of Fontevraud VII, Contribution of materials investigations to improve the safety and performance of LWRs, 2010.

]. G. Economy1987, R. J. Economy, F. W. Jacko, P. Pement, B. Efsing et al., IGSCC Behavior of Alloy 600 Steam Generator Tubing in Water or Steam Tests Above 360 C, Proceedings of the 12th International conference on Environmental Degradation of Materials in Nuclear power System ? Water ReactorsEPRI2002] Materials reliability program (MRP) Crack growth rates for evaluating primary water stress corrosion cracking (PWSCC) of thick wall Alloy 600 materials, pp.727-733, 1987.
DOI : 10.5006/1.3583859

]. C. Figueiredo2011, R. De-araujo-figueiredo, M. Bosch, and . Vankeerberghen, Electrochemical investigation of oxide films formed on nickel alloys 182, 600 and 52 in high temperature water, Electrochimica Acta, vol.56, issue.23, pp.7871-7879, 2011.
DOI : 10.1016/j.electacta.2011.05.077

]. S. Fyfitch2012, M. S. Fyfitch, J. Garcia-redondo, D. Lapeña-gutiérrez, and . Gómez-briceño, Corrosion and stress corrosion cracking of Ni-base alloy Crack growth rates in weld metal Alloy 182 in simulated PWR conditions, Comprehensive nuclear materials Proceedings of Fontevraud VI, Contribution of materials investigations to improve the safety and performance of LWRs, pp.69-92, 2006.

]. D. Goeffroy2013 and . Geoffroy, Modélisation de l'amorçage et de la propagation de fissures dans les microstructures polycristallines. Application au ?-TiAl, Thèse, Ecole nationale supérieure des mines de Paris, 2013.

M. Grediac and F. Hild, Field Measurement in Solid Mechanics, 2012.

]. C. Guerre2004, O. Guerre, L. Raquet, G. Duisabeau, and . Turluer, Effect of cyclic loadings on the stress corrosion crack growth rate in alloy 600 in PWR primary water, Proceedings of Eurocorr, 2004.
DOI : 10.1533/9781845693466.3.231

]. C. Guerre2010, H. Guerre, O. Herms, C. Raquet, C. Guerre et al., Rapport interne CEA SCC crack growth rate of Alloy 82 in PWR primary water conditions ? effect of a thermal treatment, Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, pp.1127-1139, 2010.

]. E. Hall1951 and . Hall, The Deformation and Ageing of Mild Steel: III Discussion of Results, Proceedings of the Physical Society B London, vol.64, pp.747-753, 1951.

J. Toivonen, I. Pitkanen, and . Virkkunen, Dissimilar metal weld joints and their performance in nuclear power plant and oil refinery conditions, 2006.

M. Helie, Essais de corrosion sous contrainte, Partie 6 : Préparation et utilisation des éprouvettes préfissurées pour essais sous charge constante ou sous déplacement constant, Norme AFNOR NF EN ISO, pp.7539-7545, 2003.

]. E. Héripré2006 and . Héripré, Méthode de couplage multi-échelles entre simulations numériques polycristallines et mesures de champs pour l'identification des paramètres de lois de comportement et de fissuration des matériaux métalliques. Application à l'étude des alliages TiAl, Thèse, Ecole Polytechnique PalaiseauAmorçage des fissures de corrosion sous contrainte dans les aciers inoxydables austénitiques pré-déformés et exposés au milieu primaire des réacteurs à eau sous pression Thèse, Ecole nationale supérieure des mines de Paris, p.2012, 2006.

]. R. Jacko2003, R. E. Jacko, A. Glod, and . Kroes, Accelerated corrosion testing of Alloy 52M and Alloy 182 Weldment, Proceedings of the 11th International conference on Environmental Degradation of Materials in Nuclear power System -Water Reactors, 2003.

]. A. Jenssen2006, J. Jenssen, P. Sundberg, and . Efsing, The effect of weld residual stress on the crack growth rate of Alloy 182 in BWR environment, Proceedings of Fontevraud VI, Contribution of materials investigations to improve the safety and performance of LWRs, 2006.

]. M. Kamaya2009, S. Kamaya, and . Kou, Measurement of local plastic strain distribution of stainless steel by electron backscatter diffraction, Thèse, pp.125-132, 2003.
DOI : 10.1016/j.matchar.2008.07.010

D. H. Lee, M. S. Choi, and U. C. Kim, The effect of hydrogen on the stress corrosion cracking of Alloy 600 in simulated PWR primary water at 330°C, Proceedings of the 10th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors, 2001.

]. S. Lehong2001a, C. Hong, J. Amzallag, and . Daret, Measurements of stress corrosion cracking rates in weld Alloy 182 in primary water of PWR, Proceedings of the 10th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors, 2001.

]. S. Lehong2001b, M. L. Hong, and . Millier, Influence of surface condition on primary water stress corrosion cracking initiation of Alloy 600 Fragilisation des aciers inoxydables austénitiques sous irradiation : évolution de la microstructure et amorçage de la corrosion sous contrainte assistée par l'irradiation en milieu REP Microscopic examination of an Alloy 600, Thèse, Ecole nationale supérieure des Mines de Paris, pp.323-333, 2001.

J. Liu, R. Mendonça, R. Bosch, and M. J. Konstantinovic, Characterization of oxide films formed on alloy 182 in simulated PWR primary water, Journal of Nuclear Materials, vol.393, issue.2, pp.242-248, 2009.
DOI : 10.1016/j.jnucmat.2009.06.012

]. L. Marchetti2007, L. Marchetti-sillans, S. Marchetti, Y. Perrin, F. Wouters et al., Corrosion généralisée des alliages à base nickel en milieu aqueux à haute température : Apport à la compréhension des mécanismes Photoelectrochemical study of nickel base alloys oxide films formed at high temperature and high pressure water An algorithm for least-squares estimation of nonlinear parameters Single-crystal modeling for structural calculations .1. model presentation, Thèse, Ecole des Mines de Saint-Etienne Journal of engineering materials and technology, pp.5384-5392, 1963.

]. W. Mills2003, C. M. Mills, and . Brown, Stress Corrosion Crack rates for alloy 82H welds in high temperature water, Proceedings of the 11th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors, 2003.

]. W. Mills2005, T. R. Mills, P. J. Allen, and . King, Fracture surface morphology of stress corrosion cracks in nickel-base welds Simulation of inter-and transgranular crack propagation on polycrystalline aggregates due to stress corrosion cracking, Proceedings of the 12th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors, pp.669-682, 2005.

]. J. Mullen1992, R. J. Mullen, G. Parrington, and . Murry, Stress corrosion of Alloy 600 weld metal in primary water " , EPRI Workshop on PWSCC of Alloy 600 in PWRs Soudage et soudabilité métallurgique des métaux, 1992.

M. Norring, J. Konig, P. J. Lagerstrom-allen, and . King, Influence of oxide films on primary water stress corrosion cracking initiation of Alloy 600 The effect of cold work and dissolved hydrogen in the stress corrosion cracking of Alloy 82 and Alloy 182 weld metal Interaction of microstructure, composition, and cold work on the stress corrosion cracking of Alloy 82 weld metal Overview of primary water cracking of alloys 182/82 in PWRs Dendrite boundary microchemistry in Alloy 182 weld metal Effect of chemical composition on grain boundary microchemistry and stress corrosion cracking in Alloy 182 Approches multiéchelles pour la prévision anélastique des métaux SCC initiation testing of nickel-based alloys using in-situ monitored uniaxial tensile specimens Soudage, Norme NF EN ISO 6520 -Soudages et techniques connexes -Classification des défauts géométriques dans les soudures des matériaux métalliques -Partie 1 : soudage par fusion weld metal Alloy 182 in primary PWR environment Proceedings of the 12th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors Proceedings of the 12th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power System ? Water Reactors Proceedings of Fontevraud V, Contribution of materials investigations to improve the safety and performance of LWRs Proceedings of the 11th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors ThèsePriester2006] L. Priester, Les joints de grains : de la théorie à la pratique, EDP Sciences Proceedings of the 12th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors Thèse, Ecole Nationale Supérieure des Mines de Saint-Etienne Plastic strain characterization in austenitic steels and nickel alloys by electron backscatter diffraction, pp.213-221, 1990.

]. L. St-pierre2008, E. St-pierre, M. Héripré, J. Dexet, G. Crépin et al., Effect of surface preparation on intergranular stress corrosion cracking of Alloy 600 in hydrogenated steam An overview of recent observations and interpretations of IGSCC in nickel base alloys in PWR primary water Examination of stress corrosion cracks in Alloy 182 weld metal after exposure to primary water Comparison of laboratories and field experience of PWSCC in Alloy 182 weld metal TEM investigations on the effect of chromium content and of stress relief treatment on precipitation in Alloy 82 Quantitative Micro-Nano (QMN) approach to SCC mechanism and prediction ? starting a third meeting, Proceedings of the 10th International Conference on Environmental Degradation of Materials in Nuclear Power Systems?Water Reactors Proceedings of the 12th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors Proceedings of the 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors Proceedings of the 15th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors Tezenas du Montcel, L. Nazé, V. Maurel, N. Souai, R. Logé, J.Y. Guedou, " Ingénierie des joints de grains dans les alliages à base de Nickel Congrès Français de Mécanique, pp.1516-1532, 1935.

]. F. Vaillant1999, J. Vaillant, O. Mithieux, D. De-bouvier, G. Vançon et al., Influence of chromium content and microstructure on creep and PWSCC resistance of Nickel base alloys La corrosion sous contrainte dans les circuits des centrales nucléaires à eau sous pression Influence of a cyclic loading in the initiation and propagation of PWSCC in weld metal 182 Environmental behaviour and weldability of Ni-base weld metals in PWRs, Proceedings of the 9th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors Proceedings of the 12 th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors Proceedings of Fontevraud VI, Contribution of materials investigations to improve the safety and performance of LWRs, pp.1-17, 1999.

. Amzallag, A review of weldability and SCC behaviors of Ni-bse weld metals in laboratory PWR environment, Proceedings of the 13 th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, 2007.

]. G. Was1992, M. Was, G. A. Wehbi, N. S. White, J. Nordmann et al., Parkins Symposium on Fundamental Aspects of Stress Corrosion Cracking Modélisation de l'amorçage de la Corrosion Sous Contrainte dans les alliages base nickel 182 et 82 en milieu primaire des Réacteurs à Eau sous Pression Development of crack growth rate disposition curves for primary water stress corrosion cracking (PWSCC) of Alloy 82, 182 and 132 weldments, Thèse, Ecole des Mines de Paris Proceedings of the 12th International conference on Environmental Degradation of Materials in Nuclear power System ? Water Reactors, pp.2014-511, 1992.

Y. Xie, J. Wu, J. Burns, and . Zhang, Characterization of stress corrosion cracks in Ni-based weld alloys 52, 52M and 152 grown in high-temperature water, Materials Characterization, vol.112, pp.87-97, 2016.
DOI : 10.1016/j.matchar.2015.12.005

J. Tomimatsu and . Okuda, Development of crack growth rate curves for stress corrosion cracking of nickel based alloys in a simulated primary water environment, Proceedings of Fontevraud VI, Contribution of materials investigations to improve the safety and performance of LWRs, 2006.