Kinematic hardening model suitable for ratchetting with steady-state, International Journal of Plasticity, vol.16, issue.3-4, pp.225-240, 2000. ,
DOI : 10.1016/S0749-6419(99)00052-2
Plasticity in fretting contact, Journal of the Mechanics and Physics of Solids, vol.48, issue.11, pp.2391-2417, 2000. ,
DOI : 10.1016/S0022-5096(99)00103-9
The role of macroscopic plastic deformation in fretting fatigue life predictions, International Journal of Fatigue, vol.23, issue.2, pp.121-128, 2001. ,
DOI : 10.1016/S0142-1123(00)00078-5
A comparison of lifetime prediction methods for a thermal fatigue experiment, International Journal of Fatigue, vol.28, issue.7, pp.692-706, 2006. ,
DOI : 10.1016/j.ijfatigue.2005.09.002
URL : https://hal.archives-ouvertes.fr/hal-00111459
A mathematical representation of the multiaxial Bauschinger effect, CEGB Report No. RD, p.731, 1966. ,
Récapitulatif des lois de comportement et des critères de durée de vie utilisés dans les calculs de dimensionnement à la fatigue thermomécanique pour les matériaux les plus fréquemment utilisés, Note interne PSA Peugeot Citroën, pp.8-0115, 2008. ,
Dynamic strain aging effects on low-cycle fatigue of AISI 430F, Materials Science and Engineering: A, vol.513, issue.514, pp.513-514, 2009. ,
DOI : 10.1016/j.msea.2009.01.047
Plasticity in fretting of coated substrates, Engineering Fracture Mechanics, vol.62, issue.2-3, pp.145-164, 1999. ,
DOI : 10.1016/S0013-7944(99)00002-8
Mécanique non linéaire des matériaux, Hermes Science Europe, 2001. ,
Etude de l'endommagement en fatigue thermique des aciers inoxydables F17TNb et R20-12 pour application automobile, Thèse de doctorat, Ecole Nationale Supérieure des Mines, 2004. ,
URL : https://hal.archives-ouvertes.fr/tel-00163013
Elasto-viscoplastic behaviour of the ferritic stainless steel AISI 441 -EN 1 4509 from room temperature to 850 ? C, Fatigue and Fracture Mechanics, pp.35-168, 2007. ,
Lifetime predictions and cumulative damage under high-temperature conditions. Low-cycle fatigue and life prediction, ASTM STP, vol.770, pp.81-104, 0197. ,
DOI : 10.1520/stp32424s
Continuum Damage Mechanics: Part I???General Concepts, Journal of Applied Mechanics, vol.55, issue.1, pp.59-72, 1988. ,
DOI : 10.1115/1.3173661
A NON-LINEAR CONTINUOUS FATIGUE DAMAGE MODEL, Fatigue & Fracture of Engineering Materials and Structures, vol.105, issue.1, pp.1-17, 1988. ,
DOI : 10.1007/BF02321056
Modeling of ratchetting : evaluation of various approaches, Eur J Mech A/Solids, vol.13, issue.4, pp.501-518, 1994. ,
Integration methods for complex plastic constitutive equations, Computer Methods in Applied Mechanics and Engineering, vol.133, issue.1-2, pp.125-155, 1996. ,
DOI : 10.1016/0045-7825(95)00957-4
An overview of the damage approach of durability modelling at elevated temperature, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.14, issue.6, pp.405-423, 2001. ,
DOI : 10.1016/0022-5096(72)90015-4
The slip character and low cycle fatigue behaviour: The influence of F.C.C. twinning and strain-induced F.C.C. ??? H.C.P. martensitic transformation, Acta Metallurgica, vol.28, issue.1, pp.75-88, 1980. ,
DOI : 10.1016/0001-6160(80)90042-5
Dimensionnement des structures à la fatigue thermomécanique, Thèse de doctorat, 1999. ,
An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron, Materials at High Temperatures, vol.1, issue.1, pp.1199-1206, 2000. ,
DOI : 10.1016/S0142-1123(98)00027-9
URL : https://hal.archives-ouvertes.fr/hal-00141689
Fatigue design of structures under thermomechanical loadings, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.9, issue.2, pp.1199-1206, 2002. ,
DOI : 10.1046/j.1460-2695.2000.00267.x
URL : https://hal.archives-ouvertes.fr/hal-00111365
A study of the effects of cyclic thermal stresses in a ductile metal, Trans ASME, vol.76, p.931, 1954. ,
Fatigue at high temperature. Fatigue at elevated temperatures, ASTM STP 520, pp.5-34, 1973. ,
A simple numerical method of cycle jumps for cyclically loaded structures, International Journal of Fatigue, vol.28, issue.12, pp.1677-1689, 2006. ,
DOI : 10.1016/j.ijfatigue.2006.01.010
A unified approach for high and low cycle fatigue based on shakedown concepts, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.7, issue.6, pp.561-568, 2003. ,
DOI : 10.1016/S0167-6636(97)00047-1
A computational approach to thermomechanical fatigue, International Journal of Fatigue, vol.26, issue.8, pp.805-818, 2004. ,
DOI : 10.1016/j.ijfatigue.2004.01.006
URL : https://hal.archives-ouvertes.fr/hal-00022603
Macro-micro approaches in high cycle multi-axial fatigue, Advances in multiaxial fatigue, pp.120-150, 1993. ,
In-Phase and Out-of-Phase Multiaxial Fatigue, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.112-120, 1991. ,
DOI : 10.1115/1.2903365
THERMAL FATIGUE RESISTANCE OF WELDED JOINTS IN STAINLESS STEEL HIGH TEMPERATURE EXHAUST APPLICATIONS, Tecnologia em Metalurgia e Materiais, vol.8, issue.1, pp.24-30, 2011. ,
DOI : 10.4322/tmm.2011.005
Effet du titane et du niobium sur le comportement en fatigue d?aciers inoxydables ferritiques pour le système d?échappement des véhicules automobiles, Thèse de doctorat, 2006. ,
A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT-OF-PHASE LOADING, Fatigue & Fracture of Engineering Materials and Structures, vol.106, issue.3, pp.149-65, 1988. ,
DOI : 10.1007/BF00184149
Dimensionnement à la fatigue polycyclique de structures soudées, Thèse de doctorat, 1996. ,
Microplastic Strain Hysteresis Energy as a Criterion for Fatigue Fracture, Journal of Basic Engineering, vol.83, issue.1, pp.15-22, 1961. ,
DOI : 10.1115/1.3658884
Comportement mécanique des matériaux, Hermès, 1994. ,
A New Approach to the Evaluation of Fatigue Under Multiaxial Loadings, Journal of Engineering Materials and Technology, vol.103, issue.2, pp.118-143, 1981. ,
DOI : 10.1115/1.3224982
Continuum Thermodynamics, Journal of Applied Mechanics, vol.50, issue.4b, pp.1010-1020, 1983. ,
DOI : 10.1115/1.3167184
URL : https://hal.archives-ouvertes.fr/hal-00105630
Low cycle fatigue behaviour of a low interstitial Ni-base superalloy, Acta Materialia, vol.57, issue.12, pp.3450-3459, 2009. ,
DOI : 10.1016/j.actamat.2009.03.046
The energy required for fatigue, J Mater, vol.1, issue.1, pp.3-18, 1966. ,
S Temperature effects on the strain range partitionning approach for creep fatigue analysis. Fatigue at elevated temperatures, ASTM STP 520, American Society for Testing and Materials, pp.658-669, 1973. ,
Sur les matériaux standards généralisés, Journal de Mécanique, vol.14, issue.1, pp.39-63, 1975. ,
Effects of temperature and strain range on fatigue cracking behavior in Hastelloy X, Materials Letters, vol.62, issue.28, pp.4351-4354, 2008. ,
DOI : 10.1016/j.matlet.2008.07.032
A high-cycle fatigue life model for variable amplitude multiaxial loading, Fatigue & Fracture of Engineering Materials & Structures, vol.25, issue.1, pp.67-75, 2008. ,
DOI : 10.1111/j.1460-2695.2007.01201.x
URL : https://hal.archives-ouvertes.fr/hal-00418562
An energy-based fatigue life assessment model for vairous metallic materials under proportional and non proportional loading conditions ,
Thermal-Mechanical, Low-Cycle Fatigue of AISI 1010 Steel, Therm Fatigue Mater Compon, pp.170-98, 1976. ,
DOI : 10.1520/STP27891S
The application of shakedown principles in rolling and sliding contact, Eur J Mech A/Solids, vol.11, pp.155-72, 1992. ,
Ratchetting: Recent progresses in phenomenon observation, constitutive modeling and application, International Journal of Fatigue, vol.30, issue.8, pp.1448-72, 2008. ,
DOI : 10.1016/j.ijfatigue.2007.10.002
Multiaxial ratchetting???fatigue interactions of annealed and tempered 42CrMo steels: Experimental observations, International Journal of Fatigue, vol.30, issue.12, pp.2104-2118, 2008. ,
DOI : 10.1016/j.ijfatigue.2008.06.002
Plastic ratchetting as a mechanism of erosive wear, 8th International Conference on Erosion by Liquid and Solid Impact, pp.86-91, 1995. ,
DOI : 10.1016/0043-1648(95)07179-2
A model for the mild ratchetting wear of metals, Wear, vol.200, issue.1-2, pp.38-44, 1996. ,
DOI : 10.1016/S0043-1648(96)07329-2
Thermal-mechanical fatigue testing. Automation in fatigue and fracture : testing and analysis, ASTM STP, pp.1231-563, 1994. ,
Fatigue thermique d'un alliage pour aubes de turbopompe astronautique : le superwaspaloy, Thèse de doctorat, Ecole Nationale Supérieure des Mines de Paris, 1997. ,
Low cycle fatigue under tensile mean stresses where cyclic life extension occurs, International Journal of Fatigue, vol.23, issue.4, pp.341-346, 2001. ,
DOI : 10.1016/S0142-1123(00)00098-0
Mechanics of solid materials, 1990. ,
An efficient cycles jump technique for viscoplastic structure calculations involving large number of cycles. ONERA, TP no, pp.1989-138, 1989. ,
An efficient cycles jump technique for viscoplastic structure calculations involving large numbers of cycles, 2nd Int. Conf. on Computational Plasticity, pp.591-602, 1989. ,
Stress-based fatigue failure models for uniaxial ratchetting???fatigue interaction, International Journal of Fatigue, vol.30, issue.6, pp.1065-1073, 2008. ,
DOI : 10.1016/j.ijfatigue.2007.08.005
Bithermal low-cycle fatigue evaluation of automotive exhaust system alloy SS409, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.6, issue.9, pp.787-94, 2000. ,
DOI : 10.1046/j.1460-2695.2000.00310.x
D??termination de la r??ponse asymptotique d'une structure an??lastique sous chargement thermom??canique cyclique, Comptes Rendus M??canique, vol.330, issue.10, pp.703-708, 2002. ,
DOI : 10.1016/S1631-0721(02)01516-4
A multiscale fatigue life model for complex cyclic multiaxial loading, International Journal of Fatigue, vol.33, issue.2, pp.232-240, 2011. ,
DOI : 10.1016/j.ijfatigue.2010.08.017
URL : https://hal.archives-ouvertes.fr/hal-00525572
Adaptation d'une structure elastoplastique a ecrouissage cinematique, Mechanics Research Communications, vol.4, issue.5, pp.309-323, 1977. ,
DOI : 10.1016/0093-6413(77)90007-6
High- and low-cycle fatigue crack initiation using polycrystal plasticity, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.460, issue.2047, pp.1881-903, 2004. ,
DOI : 10.1098/rspa.2003.1258
Fatigue : a complex subject -some simple approximations, Experimental Mechanics, 1965. ,
DOI : 10.1007/bf02321056
An engineering model for low cycle fatigue life based on a partition of energy and micro-crack growth, International Journal of Fatigue, vol.31, issue.5, pp.952-61, 2009. ,
DOI : 10.1016/j.ijfatigue.2008.09.004
URL : https://hal.archives-ouvertes.fr/hal-00367997
Simulation-based strategies for microstructure-sensitive fatigue modeling, Materials Science and Engineering: A, vol.468, issue.470, pp.4-14, 2007. ,
DOI : 10.1016/j.msea.2006.08.129
Microstructure-sensitive computational modeling of fatigue crack formation, International Journal of Fatigue, vol.32, issue.9, pp.1521-1542, 2010. ,
DOI : 10.1016/j.ijfatigue.2010.01.003
Stress intensity factors handbook. Volumes 1 and 2, 1987. ,
Determination of the stabilized response of a structure undergoing cyclic thermal-mechanical loads by a direct cyclic method. ABAQUS Users, Z. and Snyman M Conference Proceedings, 2003. ,
URL : https://hal.archives-ouvertes.fr/hal-00117682
On shakedown analysis in hardening plasticity, Journal of the Mechanics and Physics of Solids, vol.51, issue.1, pp.101-126, 2003. ,
DOI : 10.1016/S0022-5096(02)00058-3
Isothermal fatigue behavior of cast superalloy Inconel 792-5A at 23 and 900????C, Journal of Materials Science, vol.55, issue.401, pp.3305-3319, 2009. ,
DOI : 10.1007/s10853-009-3446-3
Constitutive modeling of cyclic plasticity with emphasis on ratchetting, International Journal of Mechanical Sciences, vol.40, issue.2-3, pp.251-61, 1998. ,
DOI : 10.1016/S0020-7403(97)00053-2
A damage function and associated failure equations for predicting hold time and frequency effects in elevated temperature, low-cycle fatigue, J Test Eval, vol.4, pp.327-366, 1976. ,
A comparative study of multiaxial high-cycle fatigue criteria for metals, International Journal of Fatigue, vol.19, issue.3, pp.219-254, 1997. ,
DOI : 10.1016/S0142-1123(96)00064-3
An optimal control approach to the analysis of inelastic structures under cyclic loading, Journal of the Mechanics and Physics of Solids, vol.51, issue.4, pp.575-605, 2003. ,
DOI : 10.1016/S0022-5096(02)00104-7
Caractérisation en fatigue oligocyclique du F17TNb (1.4509) à 20 ? C, 300 ? C, 650 ? C, 850 ? C, Note technique Ugine, pp.1-14, 2001. ,
Alternative approach to shakedown as a solution of a min-max problem, Acta Mechanica, vol.35, issue.1-4, pp.205-227, 1992. ,
DOI : 10.1007/BF01182585
Thermal-mechanical Fatigue and the Modelling of Materials Behaviour Under Thermal Transients, pp.223-261, 1371. ,
DOI : 10.1520/STP15263S
Growth of small cracks and prediction of lifetime in high-temperature alloys, Materials Science and Engineering: A, vol.468, issue.470, pp.468-470, 2007. ,
DOI : 10.1016/j.msea.2006.08.133
430 LNb -A new ferritic wire for automotive exhaust applications, SAE, 2000. ,
DOI : 10.4271/2000-01-0314
Fatigue oxidation interaction in a superalloy???application to life prediction in high temperature low cycle fatigue, Metallurgical Transactions A, vol.12, issue.1, pp.141-150, 1983. ,
DOI : 10.1007/BF02643747
An oxidation fatigue interaction damage model for thermal fatigue crack growth, Engineering Fracture Mechanics, vol.34, issue.2, pp.283-94, 1989. ,
DOI : 10.1016/0013-7944(89)90143-4
Fatigue and ratcheting interactions, International Journal of Fatigue, vol.17, issue.7, pp.507-518, 1995. ,
DOI : 10.1016/0142-1123(95)00046-V
Thermomechanical fatigue of stainless steels for automotive exhaust systems, Revue de M??tallurgie, vol.103, issue.1, pp.37-42, 2006. ,
DOI : 10.1051/metal:2006102
URL : https://hal.archives-ouvertes.fr/hal-00145071
Energy criterion for high temperature low cycle fatigue failure, Materials Science and Technology, vol.1, issue.5, pp.427-466, 1991. ,
DOI : 10.1115/1.3265565
A re-interpretation of the BCR/VAMAS low cycle fatigue intercomparison programme using an energy criterion, Materials at High Temperatures, vol.83, issue.3, pp.53-68, 1997. ,
DOI : 10.1179/mst.1994.10.7.627
Energy criteria and cumulative damage during fatigue crack growth, International Journal of Fatigue, vol.20, issue.9, pp.641-650, 1998. ,
DOI : 10.1016/S0142-1123(98)00027-9
A stress-strain function for the fatigue of metals, J Mater, vol.4, pp.767-78, 1970. ,
Multiaxial Fatigue Damage Models, Journal of Engineering Materials and Technology, vol.109, issue.4, pp.293-301, 1987. ,
DOI : 10.1115/1.3225980
Effects of frequency and environment on fatigue crack growth in A286 at 1100 F, Fatigue at elevated temperatures, ASTM STP 520, pp.112-134, 1973. ,
Nouveaux modèles de comportement élasto-viscoplastique pour des matériaux métalliques : Application au dimensionnement de structures automobiles en fonte, 2007. ,
New flow rules in elasto-viscoplastic constitutive models for spheroidal graphite cast-iron, International Journal of Plasticity, vol.26, issue.6, pp.905-929, 2010. ,
DOI : 10.1016/j.ijplas.2009.11.007
URL : https://hal.archives-ouvertes.fr/hal-00481350
Behavior, damage and fatigue life assessment of lost foam casting aluminum alloys under thermo-mechanical fatigue conditions, Procedia Engineering, vol.2, issue.1, pp.1145-54, 2010. ,
DOI : 10.1016/j.proeng.2010.03.124
URL : http://doi.org/10.1016/j.proeng.2010.03.124
Application of J-Integral to High-Temperature Crack Propagation: Part II???Fatigue Crack Propagation, Journal of Engineering Materials and Technology, vol.101, issue.2, pp.162-169, 1979. ,
DOI : 10.1115/1.3443669
Creep and low-cycle fatigue behavior of ferritic Fe-24Cr-4Al alloy in the dynamic strain aging regime: Effect of aluminum addition, Metallurgical and Materials Transactions A, vol.27, issue.6, pp.1347-55, 1997. ,
DOI : 10.1007/s11661-997-0271-7
Fatigue crack propagation???an analysis, Philosophical Magazine, vol.5, issue.155, pp.1041-66, 1968. ,
DOI : 10.1016/0001-6160(63)90010-5
Sur la fatigue thermomécanique d'un alliage d'aluminium, Thèse de doctorat, 2002. ,
Mechanil der festen körper im plasticisch deformablen zustand, Gött Nach, Math.phys . Kl, pp.582-92, 1913. ,
The relationship between striation spacing, macroscopic crack growth rate, and the low-cycle fatigue life of a Type 316 stainless steel at 625??C, Metal Science, vol.520, issue.6, pp.439-485, 1977. ,
DOI : 10.1007/BF02664781
The influence of repeated loading, residual stresses and shakedown on the behaviour of tribological contacts, Tribology International, vol.38, issue.9, pp.786-797, 2005. ,
DOI : 10.1016/j.triboint.2005.02.006
Effect of mean stress and ratcheting strain on fatigue life of steel, International Journal of Fatigue, vol.18, issue.5, pp.335-376, 1996. ,
DOI : 10.1016/0142-1123(96)00088-6