I. Energyagency, CO2 Emissions From Fuel Combustion Highlights, 2014.

J. C. Lhomme, Les énergies renouvelables, Editions Delachaux et Niestlé, 2004.

. Rte, Bilan électrique 2014 Réseau de transport d'électricité, 2015.

P. Mathis, Les énergies renouvelables ont-elles un avenir?, Edition le Pommier, 2004.

J. F. Lefebre, N. Moreau, and J. Théorêt, Energies renouvelables: mythes et obstacles de la rehabilitation de l, 2010.

F. Friedler, Process integration, modelling and optimisation for energy saving and pollution reduction, Applied Thermal Engineering, vol.30, issue.16, pp.2270-2280, 2010.
DOI : 10.1016/j.applthermaleng.2010.04.030

URL : https://hal.archives-ouvertes.fr/hal-00485512

J. Fricker, Etude et conception d'un nouveau système de chauffage de solides intégré par thermofrigo-pompe, 2014.

S. G. Yoon, J. Lee, and S. Park, Heat integration analysis for an industrial ethylbenzene plant using pinch analysis, Applied Thermal Engineering, vol.27, issue.5-6, pp.886-893, 2006.
DOI : 10.1016/j.applthermaleng.2006.09.001

B. Linnhoff, A user guide on Process Integration for the Efficient Use of Energy, 1982.

M. Morar and P. S. Agachi, Review: Important contributions in development and improvement of the heat integration techniques, Computers & Chemical Engineering, vol.34, issue.8, pp.1171-1179, 2010.
DOI : 10.1016/j.compchemeng.2010.02.038

A. E. Dor, Perfectionnement des algorithmes d'optimisation par essaim particulaire : applications en segmentation d'image et en électronique, 2012.

P. G. Jin-kao and . Hao, Méthaheuristiques pour l'optimisation combinatoire et l'affectation sous contraintes, 1998.

R. Benelmir, A. Lallemand, and M. Feidt, Analyse exergétique, 2002.

X. Feng and Y. Zhu, Combining pinch and exergy analysis for process modifications, Applied Thermal Engineering, vol.17, issue.3, pp.249-261, 1997.
DOI : 10.1016/S1359-4311(96)00035-X

R. Anantharaman, O. S. Abbas, and T. Gundersen, Energy Level Composite Curves???a new graphical methodology for the integration of energy intensive processes, Applied Thermal Engineering, vol.26, issue.13, pp.1378-1384, 2006.
DOI : 10.1016/j.applthermaleng.2005.05.029

R. Frazier, An exergy diagnostic methodology for energy management in manufacturing, 2006.

J. Chevalier, Élaboration d'un protocole d'ACV des procédés : application au traitement des fumées d'incinération des déchets ménagers, 1999.

J. Portha, Méthodologie pour tenir compte de l'impact environnemental d'un procédé lors de sa conception, 2008.

P. S. Bieler, U. Fischer, and K. Hungerbuhler, Modeling the Energy Consumption of Chemical Batch Plants:?? Bottom-Up Approach, Industrial & Engineering Chemistry Research, vol.43, issue.24, pp.6135-6144, 2003.
DOI : 10.1021/ie049641j

P. S. Sharrat, Handbook of batch process design, 1997.
DOI : 10.1007/978-94-009-1455-1

I. C. Kemp, Pinch analysis and process integration: A user guide on process integration for the efficient use of energy, 2007.

S. Stolze, J. Mikkelsen, B. Lorentzen, P. M. Petersen, and B. Qvale, Waste-Heat Recovery in Batch Processs Using Heat Storage, Journal of Energy Resources Technology, vol.117, issue.2, pp.142-149, 1995.
DOI : 10.1115/1.2835330

R. W. Clayton, Cost reductions on a productions of synthetic resins by a process integration study at Cray Valley Products Ltd, Energy Technology Support Unit, 1986.

R. W. Clayton, Cost reductions on an edible oil refinery identified by a process integration study at Van den Berghs and Jurgens Ltd, Energy Technology support Unit, 1986.

I. C. Kemp and A. W. Deakin, The cascade analysis for energy and process integration of batch processes. I: Calculation of energy targets, Chemical Engineering research and design, vol.67, pp.495-509, 1989.

I. C. Kemp and A. W. Deakin, The cascade analysis for energy and process integration of batch processes. II: Network design and process scheduling, Chemical Engineering research and design, vol.67, pp.510-516, 1989.

I. C. Kemp, Process integration: process change and batch processes, 1990.

I. Dincer and M. A. Rosen, On thermal energy storage systems and applications in buildings, Energy and Buildings, vol.34, issue.4, 2002.
DOI : 10.1016/S0378-7788(01)00126-8

Y. P. Wang and R. Smith, Time pinch analysis, Trans IChemE, vol.73, pp.905-914, 1995.

A. F. Christodoulos and L. Xiaoxia, Continuous-time versus discrete-time approaches for scheduling of chemical processes: a review, Computer and Chemical Engineering, vol.28, pp.2109-2129, 2004.

J. A. Vaselenak, I. E. Grossmann, and A. W. Westerberg, Heat integration in batch processing, Industrial & Engineering Chemistry Process Design and Development, vol.25, issue.2, pp.357-366, 1986.
DOI : 10.1021/i200033a004

T. Hellwig and E. Thone, Omnium: ein verfahren zur optimierung der abwarmenutzung, Brennstoff, vol.46, pp.393-397, 1994.

H. W. Kuhn, The Hungarian method for the assignment problem, Naval Research Logistics Quarterly, vol.3, issue.1-2, pp.83-97, 1995.
DOI : 10.1002/nav.3800020109

B. Ivanov, K. Peneva, and N. Bancheva, Heat integration of batch vessels at fixed time interval I. Schemes with recycling main fluids, Hungarian Journal of Industry and Chemistry, vol.20, pp.225-231, 1992.

K. Peneva, N. Ivanov, and N. Bancheva, Heat integration of batch vessels at fixed time interval II. Schemes with intermediate heating and cooling agents, Hungarian Journal od Industry and Chemistry, vol.20, pp.233-239, 1992.

T. Majozi, Heat integration of multipurpose batch plants using a continuous-time framework, Applied Thermal Engineering, vol.26, issue.13, pp.1369-1377, 2006.
DOI : 10.1016/j.applthermaleng.2005.05.027

E. D. Obeng and G. J. Ashton, On pinch technology based procedures for the design of batch processes, Chemical Engineering Research and Design, vol.66, pp.255-259, 1988.

S. H. Jung, I. B. Lee, D. R. Yang, and K. S. Chang, Synthesis of maximum energy recovery networks in batch processes, Korean Journal of Chemical Engineering, vol.67, issue.3, pp.853-868, 1994.
DOI : 10.1007/BF02697461

B. Lee and G. V. Reklaitis, Optimal scheduling of cyclic batch processes for heat integration

I. Part, Process scheduling based on cascade analysis, Chem Eng Res Des, vol.76, pp.685-699, 1998.

X. Zhao, B. K. O-'neil, J. R. Roach, and R. M. Wood, Heat Integration For Batch Processes, Chemical Engineering Research and Design, vol.76, issue.6, pp.685-699, 1998.
DOI : 10.1205/026387698525397

X. G. Zhao, B. K. O-'neil, J. R. Roach, and R. M. Wood, Heat Integration for Batch Processes, Chemical Engineering Research and Design, vol.76, issue.6, pp.700-710, 1998.
DOI : 10.1205/026387698525405

B. Ivanov, K. Peneva, and N. Bancheva, Heat integration in batch reactors operating in differernt time intervals. Part 1. A hot-cold reactor system with two storage tanks, Hungarian Journal of industry and chemistry, vol.21, pp.201-207, 1993.

B. Ivanov, K. Peneva, and N. Bancheva, Heat integration in batch reactors operating in different intervals. Part 2. A hot-cold reactor system with a commun storage tank, Hungarian Journal of industry and chemistry, vol.21, pp.209-216, 1993.

B. Ivanov, K. Peneva, and N. Bancheva, Heat integration in batch reactors operating in different time intervals. Part 3. Synthesis and reconstruction of integrated systems with heat tanks, Hungarian Journal of industry and chemistry, vol.21, pp.217-223, 1993.

T. Majozi, Minimization of energy use in multipurpose batch plants using heat storage: an aspect of cleaner production, Journal of Cleaner Production, vol.17, issue.10, pp.945-950, 2009.
DOI : 10.1016/j.jclepro.2009.02.013

J. Stamp and T. Majozi, Optimum heat storage design for heat integrated multi-purpose batch plants, pp.5119-5131, 2011.
DOI : 10.1016/j.energy.2011.06.009

URL : http://repository.up.ac.za/bitstream/2263/40425/1/stamp_optimum_2014.pdf

J. B. Mikkelsen, Thermal-energy storage systems in batch processing, 1998.

P. Krummenacher and D. Favrat, Indirect and mixed direct-indirect heat integration of batch processes based on Pinch analysis, International Journal of applied thermodynamics, vol.4, pp.135-143, 2001.

P. Krummenacher, Contribution to the heat integration of batch processes (with or without storage), Switzerland: Ecole polytechnique federale de Lausanne, 2001.

J. Clausen, Branch and bound algorithms -principles and examples, 1999.

R. E. Gomory, An algorithm for the mixed integer problem, 1960.

R. E. Gomory, Outline of an algorithm for integer solutions to linear programs, Bulletin of the American Mathematical Society, vol.64, issue.5, pp.275-278, 1958.
DOI : 10.1090/S0002-9904-1958-10224-4

R. E. Gomory, Solving linear programming problems in integers, Proc. Symp. Appl. Math
DOI : 10.1090/psapm/010/0114670

E. Bettanini, Simplified models to simulate part load performances of air conditioning equipments, 8th International IBPSA conference, pp.11-14, 2003.

D. Marchio and S. Filfli, Modèle simplifié d'un système Split, 2004.

C. Maatouk, A. Zoughaib, and D. Clodic, New methodology of characterization of seasonal performance factor of an Air to Water heat pump, International Refrigeation and Air Conditioning Conference, 2010.

A. Sweedish-energy, www.energimyndigheten.se

D. Didion and R. Radermacher, Part-load performance characteristics of residential absorption chillers and heat pump, International Journal of Refrigeration, vol.7, issue.6, pp.393-398, 1994.
DOI : 10.1016/0140-7007(84)90011-2

E. Cho, Catalog of CHP Technologies. Section 6. Techonology characterization -Fuel Cells, 2015.

R. Murr, H. Thieriot, A. Zoughaib, and D. Clodic, Multi-objective optimization of a multi water-to-water heat pump system using evolutionary algorithm, Applied Energy, vol.88, issue.11, pp.3580-3591, 2011.
DOI : 10.1016/j.apenergy.2011.04.013

URL : https://hal.archives-ouvertes.fr/hal-00769627

R. Murr, Gains énergétiques globaux par installation de pompes à chaleur dans un procédé agroalimentaire, 2010.

L. Tourette, www.fromagerie-tourette.com