). J. Bacon and Y. N. , Osetsky : Modelling dislocation-obstacle interactions in metals exposed to an irradiation environment, bibliographiques Materials Science and Engineering, pp.400-401, 2005.

). Baltazar-hernandez, S. K. Panda, M. L. Kuntz, and Y. Zhou, Nanoindentation and microstructure analysis of resistance spot welded dual phase steel, Materials Letters, vol.64, issue.2, 2010.
DOI : 10.1016/j.matlet.2009.10.040

). W. Bonner and G. F. , Modlen : Load sharing and interphase residual microstresses in a high carbon pearlitic steel, Proceedings of the 5 th International Conference of Residual Stresses ICRS-5, pp.1109-1114, 1997.

N. Anastopoulos, G. Michailidis, R. Erkens, and . Cremer, Determination of coating residual stress alterations demonstrated in the case of annealed films and based on a FEM supported continuous simulation of the nanoindentation, Surface and Coatings Technology, pp.174-175, 2003.

). Breuils, J. Krier, H. Pelletier, and P. , Identification, using nanoindentation tests, of mechanical behaviour of a 2C22 steel presenting a residual stress state, Procedia Engineering, vol.10, pp.3528-3533, 2011.
DOI : 10.1016/j.proeng.2011.04.580

). Che, M. Gotoh, Y. Horimoto, and Y. Hirose, Effect of microstructure of cementite on interphase stress state in carbon steel, Journal of Iron and Steel Research International, vol.14, pp.31-38, 2007.

). Y. Chen and D. Gan, Effects of grain boundary carbides on the tensile and impact properties of type 316 stainless steel, Materials Science and Engineering, vol.84, pp.65-76, 1986.
DOI : 10.1016/0025-5416(86)90223-5

). M. Chen, R. P. Pan, and C. L. , Pan : Identification of third and fifth order selfphase modulation effects in laser-induced diffraction rings from a nematic liquid crystal film, Optics Communications, vol.79, pp.4769-472, 1990.

W. Y. Choi, D. Choo, and . Kwon, Analysis of mechanical property distribution in multiphase ultra-fine-grained steels by nanoindentation, Scripta Materialia, vol.45, issue.12, pp.1401-1406, 2001.
DOI : 10.1016/S1359-6462(01)01176-9

). Clavel and A. Pineau, Fatigue behaviour of two nickel-base alloys II: Physical modelling of the fatigue crack propagation process, Materials Science and Engineering, vol.55, issue.2, pp.173-180, 1982.
DOI : 10.1016/0025-5416(82)90130-6

). P. Cotton, Diffraction et spectrométrie des neutrons, Traité Analyse et Caractérisation, vol.1095, pp.1-11, 1996.

). Dakhlaoui, V. Klosek, M. H. Mathon, and B. Marini, Orientation stress field analysis in polycrystalline bcc steel using neutron diffraction, Acta Materialia, vol.58, issue.2, pp.499-509, 2010.
DOI : 10.1016/j.actamat.2009.09.028

). R. Daymond and H. G. Priesmeyer, Elastoplastic deformation of ferritic steel and cementite studied by neutron diffraction and self-consistent modelling, Acta Materialia, vol.50, issue.6, pp.1613-1626, 2002.
DOI : 10.1016/S1359-6454(02)00026-5

). Delincé, P. J. Jacques, and T. Pardeon, Separation of size-dependent strengthening contributions in fine-grained Dual Phase steels by nanoindentation, Acta Materialia, vol.54, issue.12, pp.3395-3404, 2006.
DOI : 10.1016/j.actamat.2006.03.031

). F. Doerner and W. D. Nix, A method for interpreting the data from depth-sensing indentation instruments, Journal of Materials Research, vol.36, issue.04, pp.601-609, 1986.
DOI : 10.1016/0020-7225(65)90019-4

M. Fernandez-vicente-fernandez-vincente and J. L. Pellizzari, Feasibility of laser surface treatment of pearlitic and bainitic ductile irons for hot rolls, Journal of Materials Processing Technology, vol.212, issue.5, pp.989-1002, 2008.
DOI : 10.1016/j.jmatprotec.2011.11.013

J. Gong, H. Miao, and Z. Peng, Analysis of the nanoindentation data measured with a Berkovich indenter for brittle materials: effect of the residual contact stress, Acta Materialia, vol.52, issue.3, pp.785-793, 2004.
DOI : 10.1016/j.actamat.2003.10.013

). Hausild, C. Berdin, and P. Bompard, Prediction of cleavage fracture for a low-alloy steel in the ductile-to-brittle transition temperature range, Materials Science and Engineering: A, vol.391, issue.1-2, 2005.
DOI : 10.1016/j.msea.2004.08.067
URL : https://hal.archives-ouvertes.fr/hal-00018919

). C. Kim, Y. J. Oh, and J. H. , Characterization of boundaries and determination of effective grain size in Mn-Mo-Ni low alloy steel from the view of misorientation, Scripta Materialia, vol.43, issue.3, pp.205-2011, 1999.
DOI : 10.1016/S1359-6462(00)00392-4

). Kim, Y. R. Im, S. Lee, and Y. J. , Oh : Effects of alloying elements on mechanical and fracture properties of base metals and simulated heat, 2001.

). M. Korsunsky, K. E. Wells, and P. J. , Mapping two-dimensional state of strain using synchroton X-ray diffraction, Scripta Materialia, vol.39, issue.12, pp.1705-1712, 1998.
DOI : 10.1016/S1359-6462(98)00385-6

. Lambert-perlade, Lambert-Perlade : Rupture par clivage de microstructures d'aciers bainitiques obtenues dans des conditions de soudage, Thèse de Doctorat de l'Ecole Nationale Supérieure des Mines de Paris, 2001.

L. Lambert-perlade, A. F. Gourgues, and A. Pineau, Austenite to bainite phase transformation in the heat-affected zone of a high strength low alloy steel, Acta Materialia, vol.52, issue.8, pp.2337-2348, 2004.
DOI : 10.1016/j.actamat.2004.01.025
URL : https://hal.archives-ouvertes.fr/hal-00166070

). Lee, S. Kim, B. Hwang, B. S. Lee, and C. G. Lee, Effect of carbide distribution on the fracture toughness in the transition temperature region of an SA 508 steel, Acta Materialia, vol.50, issue.19, pp.4755-4762, 2002.
DOI : 10.1016/S1359-6454(02)00313-0

). Libert, C. Rey, L. Vincent, and B. Marini, Temperature dependant polycristal model application to bainitic steel behavior under tri-axial loading in the ductile- Références bibliographiques 173, 2011.

). C. Lindley, G. Oate, and C. E. Richard, A critical of carbide cracking mechanisms in ferride/carbide aggregates, Acta Metallurgica, vol.18, issue.11, pp.1127-1136, 1970.
DOI : 10.1016/0001-6160(70)90103-3

). Maier, A. Richter, R. G. Faulkner, and R. Ries, Application of nanoindentation technique for structural characterisation of weld materials, Materials Characterization, vol.48, issue.4, pp.329-339, 2002.
DOI : 10.1016/S1044-5803(02)00274-7

). Mantyla, A. Rossel, I. Nedbal, C. Prioul, and B. Marini, Fractographic observations of cleavage fracture initiation in a bainitic A508 steel, Journal of Nuclear Materials, vol.264, issue.3, pp.257-262, 1999.
DOI : 10.1016/S0022-3115(98)00496-6

. L. Martinez-perez-m, F. J. Martinez-perez, J. Mompean, C. R. Ruiz-hervias, J. M. Borlado et al., Residual stress profiling in the ferrite and cementite phases of cold-drawn steel rods by synchrotron X-ray and neutron diffraction, Acta Materialia, vol.52, issue.18, pp.5303-5313, 2004.
DOI : 10.1016/j.actamat.2004.07.036

). P. Mathieu, Analyse et modélisation micromécanique du comportement et de la rupture fragile de l'acier 16MND5, Thèse de Doctorat de l'Ecole Nationale Supérieure d'Arts et Métiers, 2006.

). P. Mathieu, K. Inal, and S. Berveiller, A micromechanical interpretation of the temperature dependence of Beremin model parameters for french RPV steel, Journal of Nuclear Materials, vol.406, issue.1, pp.97-112, 2010.
DOI : 10.1016/j.jnucmat.2010.02.025
URL : https://hal.archives-ouvertes.fr/hal-00833671

). J. Mcmahon and M. Cohen, Initiation of cleavage in polycrystalline iron, Acta Metallurgica, vol.13, issue.6, pp.591-604, 1965.
DOI : 10.1016/0001-6160(65)90121-5

). Nenner, J. Doucet, and H. Dexpert, Rayonnement synchrotron et applications, Traité Analyse et Caractérisation, vol.2700, pp.1-25, 1997.

). N. Nguyen, Modélisation du comportement en plasticité et à rupture des aciers bainitiques irradiés, Thèse de Doctorat de l'Ecole Nationale Supérieure des Mines de Paris, 2010.

). Nikolussi, S. L. Shang, T. Gressmann, A. Leineweber, E. J. Mittemeijer et al., Extreme elastic anisotropy of cementite, Fe3C: First-principles calculations and experimental evidence, Scripta Materialia, vol.59, issue.8, pp.814-817, 2008.
DOI : 10.1016/j.scriptamat.2008.06.015
URL : http://hdl.handle.net/11858/00-001M-0000-0010-418E-1

). D. Norris and J. D. Parker, The effect of microstructure on fracture mechanisms of 2.25Cr1Mo low alloy steel, part A: the influence of non-metallic inclusions, International Journal of Pressure Vessels and Piping, vol.1, issue.67, pp.317-327, 1996.

). D. Norris and J. D. Parker, The effect of microstructure on fracture mechanisms of 2??25Cr1Mo low alloy steel, part B: the influence of carbides, International Journal of Pressure Vessels and Piping, vol.67, issue.3, pp.329-337, 1996.
DOI : 10.1016/0308-0161(95)00057-7

). Obrtlik, C. F. Robertson, and B. Marini, Dislocation structures in 16MND5 pressure vessel steel strained in uniaxial tension, Journal of Nuclear Materials, vol.342, issue.1-3, pp.35-41, 2005.
DOI : 10.1016/j.jnucmat.2005.03.010

). E. Offerman, N. H. Van-dijk, J. Sietsma, E. M. Lauridsen, L. Margulies et al., 3DXRD microscopy for the study of solid-state phase transformation kinetics, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol.238, issue.1-4, pp.107-110, 2005.
DOI : 10.1016/j.nimb.2005.06.027

). Ohmura, K. Sawada, K. Kimura, and K. Tsuzaki, Alteration in nanohardness of matrix phase associated with precipitation during long-term aging of type 316 stainless steel, Materials Science and Engineering: A, vol.489, issue.1-2, pp.85-92, 2008.
DOI : 10.1016/j.msea.2007.12.003

). C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, pp.1564-1582, 1992.
DOI : 10.1557/JMR.1992.0613
URL : https://hal.archives-ouvertes.fr/hal-01518596

). C. Oliver, M. R. Daymond, and P. J. Withers, Interphase and intergranular stress generation in carbon steels, Acta Materialia, vol.52, issue.7, pp.1937-1951, 2004.
DOI : 10.1016/j.actamat.2003.12.035

). Pesci, K. Inal, and R. Masson, Three scale modeling of the behavior of a 16MND5-A508 bainitic steel: Stress distribution at low temperatures, Materials Science and Engineering: A, vol.527, issue.1-2, pp.376-386, 2009.
DOI : 10.1016/j.msea.2009.08.020
URL : https://hal.archives-ouvertes.fr/hal-01166251

). B. Pethica, R. Hutchings, and W. Oliver, Composition and hardness profiles in iron implanted metals. Nuclear Instruments and Methods in Physics Research, pp.995-1000, 1983.
DOI : 10.1016/0167-5087(83)90911-0

). Pineau and B. Tanguy, Advances in cleavage fracture modelling in steels, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00542464

). M. Pipard, N. Nicaise, S. Berbenni, and O. Bouaziz, A new mean field micromechanical approach to capture grain size effects, Computational Materials Science, vol.45, issue.3, pp.604-610, 2009.
DOI : 10.1016/j.commatsci.2008.06.012

). Pluvinage, Z. Azari, N. Kadi, I. Dlouhy, and V. Kozak, Effect of ferritic microstructure on local damage zone distance associated with fracture near notch, Theoretical and Applied Fracture Mechanics, vol.31, issue.2, pp.149-156, 1999.
DOI : 10.1016/S0167-8442(99)00009-9

). Roy, Mesure de l'adhérence et des propriétés mécaniques de couches minces par des essais dérivés de la nanoindentation, Thèse de Doctorat de l'Ecole Nationale Supérieure des Mines de Paris, 2008.

). Saha and W. D. Nix, Effects of the substrate on the determination of thin film mechanical properties by nanoindentation, Acta Materialia, vol.50, issue.1, pp.23-38, 2002.
DOI : 10.1016/S1359-6454(01)00328-7