E. Abisset, F. Daghia, X. Sun, M. Wisnom, and S. Hallett, Interaction of inter- and intralaminar damage in scaled quasi-static indentation tests: Part 1 ??? Experiments, Composite Structures, vol.136, pp.712-726, 2016.
DOI : 10.1016/j.compstruct.2015.09.061

R. Alvarez-lima, A. Diaz-diaz, J. Caron, and S. Chataigner, Enhanced layerwise model for laminates with imperfect interfaces ??? Part 1: Equations and theoretical validation, Composite Structures, vol.94, issue.5, pp.1694-1702, 2012.
DOI : 10.1016/j.compstruct.2011.12.007
URL : https://hal.archives-ouvertes.fr/hal-00851453

S. Ambartsumian, On the theory of bending of anisotropic plates and shallow shells, Journal of Applied Mathematics and Mechanics, vol.24, issue.2, pp.500-514, 1960.
DOI : 10.1016/0021-8928(60)90052-6

S. Ambartsumyan, Theory of anisotropic plate, 1969.

R. C. Averill, Static and dynamic response of moderately thick laminated beams with damage, Composites Engineering, vol.4, issue.4, pp.381-395, 1994.
DOI : 10.1016/S0961-9526(09)80013-0

E. J. Barbero and J. N. Reddy, Modeling of delamination in composite laminates using a layer-wise plate theory, International Journal of Solids and Structures, vol.28, issue.3, pp.373-388, 1991.
DOI : 10.1016/0020-7683(91)90200-Y

R. Baroud, K. Sab, J. F. Caron, and F. Kaddah, A statically compatible layerwise stress model for the analysis of multilayered plates, International Journal of Solids and Structures, vol.96, pp.11-24, 2016.
DOI : 10.1016/j.ijsolstr.2016.06.030

S. Botello, E. Onate, and J. M. Canet, A layer-wise triangle for analysis of laminated composite plates and shells, Computers & Structures, vol.70, issue.6, pp.635-646, 1999.
DOI : 10.1016/S0045-7949(98)00165-5

D. Caillerie and J. C. Nedelec, Thin elastic and periodic plates, Mathematical Methods in the Applied Sciences, vol.2, issue.18, pp.159-191, 1984.
DOI : 10.1007/BFb0091528

J. Caron and A. Ehrlacher, Modelling the kinetics of transverse cracking in composite laminates, Composites Science and Technology, vol.57, issue.9-10, pp.1261-1270, 1997.
DOI : 10.1016/S0266-3538(97)00059-6

J. F. Caron, A. Diaz-diaz, R. P. Carreira, A. Chabot, and A. Ehrlacher, Multi-particle modelling for the prediction of delamination in multi-layered materials, Composites Science and Technology, vol.66, issue.6, pp.755-765, 2006.
DOI : 10.1016/j.compscitech.2004.12.022
URL : https://hal.archives-ouvertes.fr/hal-01534780

R. P. Carreira, J. F. Caron, and A. Diaz-diaz, Model of multilayered materials for interface stresses estimation and validation by finite element calculations, Mechanics of Materials, vol.34, issue.4, pp.217-230, 2002.
DOI : 10.1016/S0167-6636(02)00102-3
URL : https://hal.archives-ouvertes.fr/hal-00401790

E. Carrera, Mixed layer-wise models for multilayered plates analysis, Composite Structures, vol.43, issue.1, pp.57-70, 1998.
DOI : 10.1016/S0263-8223(98)00097-X

E. Carrera, Multilayered Shell Theories Accounting for Layerwise Mixed Description, Part 1: Governing Equations, AIAA Journal, vol.3, issue.2, pp.1107-1116, 1999.
DOI : 10.1115/1.3171828

E. Carrera, Multilayered Shell Theories Accounting for Layerwise Mixed Description, Part 2: Numerical Evaluations, AIAA Journal, vol.19, issue.9, pp.1117-1124, 1999.
DOI : 10.1016/0020-7225(85)90051-5

E. Carrera, An assessment of mixed and classical theories on global and local response of multilayered orthotropic plates, Composite Structures, vol.50, issue.2, pp.183-198, 2000.
DOI : 10.1016/S0263-8223(00)00099-4

E. Carrera, Theories and finite elements for multilayered, anisotropic, composite plates and shells, Archives of Computational Methods in Engineering, vol.35, issue.6, pp.87-140, 2002.
DOI : 10.2514/3.10099

E. Carrera, Historical review of Zig-Zag theories for multilayered plates and shells, Applied Mechanics Reviews, vol.56, issue.3, 2003.
DOI : 10.1115/1.1557614

E. Carrera, On the use of the Murakami's zig-zag function in the modeling of layered plates and shells, Computers & Structures, vol.82, issue.7-8, pp.541-554, 2004.
DOI : 10.1016/j.compstruc.2004.02.006

A. Cecchi and K. Sab, A homogenized Reissner???Mindlin model for orthotropic periodic plates: Application to brickwork panels, International Journal of Solids and Structures, vol.44, issue.18-19, pp.6055-6079, 2007.
DOI : 10.1016/j.ijsolstr.2007.02.009

A. Chabot, Interface Stress Analysis between Layers of composite Materials with the aid of Multi-particle Modellings of Multilayered Materials (M4). Theses. Ecole Nationale des Ponts et Chaussées URL: https://pastel. archives-ouvertes.fr/tel-00197853, 1997.
URL : https://hal.archives-ouvertes.fr/tel-00197853

S. Chataigner, J. Caron, V. Duong, and A. Diaz-diaz, Experimental and numerical investigation of shear strain along an elasto-plastic bonded lap joint, Construction and Building Materials, vol.25, issue.2, pp.432-441, 2011.
DOI : 10.1016/j.conbuildmat.2010.05.021
URL : https://hal.archives-ouvertes.fr/hal-00526090

M. Cho and R. R. Parmerter, Efficient higher order composite plate theory for general lamination configurations, American Institute of Aeronautics and Astronautics Journal, vol.31, pp.1299-1305, 1993.

C. H. Chue and C. I. Liu, Disappearance of free-edge stress singularity in composite laminates, Composite Structures, vol.56, issue.1, pp.111-129, 2002.
DOI : 10.1016/S0263-8223(01)00172-6

F. Daghia, S. De-miranda, F. Ubertini, and E. Viola, A hybrid stress approach for laminated composite plates within the First-order Shear Deformation Theory, International Journal of Solids and Structures, vol.45, issue.6, pp.1766-1787, 2008.
DOI : 10.1016/j.ijsolstr.2007.10.020

D. Moorthya, C. M. Reddy, and J. N. , Modelling of laminates using a layerwise element with enhanced strains, International Journal for Numerical Methods in Engineering, vol.28, issue.4, pp.755-779, 1998.
DOI : 10.1016/0020-7683(81)90014-7

J. Dallot and K. Sab, Limit analysis of multi-layered plates. Part II: Shear effects, Journal of the Mechanics and Physics of Solids, vol.56, issue.2, pp.561-580, 2008.
DOI : 10.1016/j.jmps.2007.05.006

G. Dhatt and G. Touzot, Une présentation de la méthode des éléments finis, 1984.

D. Sciuva and M. , A refined transverse shear deformation theory for multilayered anisotropic plates, Atti. Accad. Sci. Torino, vol.118, pp.279-295, 1984.

D. Diaz and A. , Delaminage des materiaux multicouches : Phenomenes, modeles et criteres, 2001.

D. Diaz, A. Caron, and J. F. , Interface plasticity and delamination onset prediction, Mechanics of Materials, vol.38, issue.7, pp.648-663, 2006.
DOI : 10.1016/j.mechmat.2005.12.001

D. Diaz, A. Caron, J. F. Carreira, and R. P. , Software application for evaluating interfacial stresses in inelastic symmetrical laminates with free edges, Composite Structures, vol.58, issue.2, pp.195-208, 2002.
DOI : 10.1016/S0263-8223(02)00123-X

V. A. Duong, A. Diaz-diaz, S. Chataigner, and J. F. Caron, A layerwise finite element for multilayers with imperfect interfaces, Composite Structures, vol.93, issue.12, pp.3262-3271, 2011.
DOI : 10.1016/j.compstruct.2011.05.001
URL : https://hal.archives-ouvertes.fr/hal-00639548

P. Gaudenzi, R. Barboni, and A. Mannini, A finite element evaluation of single-layer and multi-layer theories for the analysis of laminated plates, Composite Structures, vol.30, issue.4, pp.427-440, 1995.
DOI : 10.1016/0263-8223(94)00065-4

G. Giunta, A. Catapano, S. Belouettar, P. Vannucci, and E. Carrera, Failure Analysis of Composite Plates Subjected to Localized Loadings via a Unified Formulation, Journal of Engineering Mechanics, vol.138, issue.5, pp.458-467, 2012.
DOI : 10.1061/(ASCE)EM.1943-7889.0000358

R. Hadj-ahmed, G. Foret, and A. Ehrlacher, Stress analysis in adhesive joints with a multiparticle model of multilayered materials (M4), International Journal of Adhesion and Adhesives, vol.21, issue.4, pp.297-307, 2001.
DOI : 10.1016/S0143-7496(00)00034-8

L. H. He, A linear theory of laminated shells accounting for continuity of displacements and transverse shear stresses at layer interfaces, International Journal of Solids and Structures, vol.31, issue.5, pp.613-6270020, 1994.
DOI : 10.1016/0020-7683(94)90141-4

F. B. Hildebrand, E. Reissner, and G. B. Thomas, Notes on the foundations of the theory of small displacements of orthotropic shells, 1938.

U. Icardi, Higher-order zig-zag model for analysis of thick composite beams with inclusion of transverse normal stress and sublaminates approximations, Composites Part B: Engineering, vol.32, issue.4, pp.343-354, 2001.
DOI : 10.1016/S1359-8368(01)00016-6

A. Idlbi, M. Karama, and M. Touratier, Comparison of various laminated plate theories URL: http://www.sciencedirect.com/science, Composite Structures, vol.3797, pp.173-184, 1997.

T. Kant, D. Owen, and O. Zienkiewicz, A refined higher order c0 plate bending element, Computers and Structures, vol.1582, pp.177-1830045, 1982.
DOI : 10.1016/0045-7949(82)90065-7
URL : http://repository.ias.ac.in/15628/1/312.pdf

T. Kant and K. Swaminathan, Estimation of transverse/interlaminar stresses in laminated composites ??? a selective review and survey of current developments, Composite Structures, vol.49, issue.1, pp.65-75, 2000.
DOI : 10.1016/S0263-8223(99)00126-9

T. Kant and K. Swaminathan, Analytical solutions for the static analysis of laminated composite and sandwich plates based on a higher order refined theory, Composite Structures, vol.56, issue.4, pp.329-344, 2002.
DOI : 10.1016/S0263-8223(02)00017-X

M. Karama, B. A. Harb, S. Mistou, and S. Caperaa, Bending, buckling and free vibration of laminated composite with a transverse shear stress continuity model, Composites Part B: Engineering, vol.29, issue.3, pp.223-234, 1998.
DOI : 10.1016/S1359-8368(97)00024-3

C. Kassapoglou, An Efficient Method for the Calculation of Interlaminar Stresses in Composite Materials, Journal of Applied Mechanics, vol.53, issue.4, pp.744-750, 1986.
DOI : 10.1115/1.3171853

C. Kassapoglou and P. Lagace, Closed Form Solutions for the Interlaminar Stress Field in Angle-Ply and Cross-Ply Laminates, Journal of Composite Materials, vol.30, issue.4, pp.292-308, 1987.
DOI : 10.1016/S0022-460X(73)80052-5

A. Lebée and K. Sab, A Bending-Gradient model for thick plates. Part I: Theory, International Journal of Solids and Structures, vol.48, issue.20, pp.2878-2888, 2011.
DOI : 10.1016/j.ijsolstr.2011.06.006

A. Lebée and K. Sab, A Bending-Gradient model for thick plates, Part II: Closed-form solutions for cylindrical bending of laminates, International Journal of Solids and Structures, vol.48, issue.20, pp.2889-2901, 2011.
DOI : 10.1016/j.ijsolstr.2011.06.005

A. Lebée and K. Sab, Homogenization of thick periodic plates: Application of the Bending-Gradient plate theory to a folded core sandwich panel, International Journal of Solids and Structures, vol.49, issue.19-20, pp.2778-2792, 2012.
DOI : 10.1016/j.ijsolstr.2011.12.009

A. Lebée and K. Sab, On the Generalization of Reissner Plate Theory to Laminated Plates, Part I: Theory, Journal of Elasticity, vol.26, issue.5, pp.1-28, 2016.
DOI : 10.1016/j.ijadhadh.2005.04.004

A. Lebée and K. Sab, On the Generalization of Reissner Plate Theory to Laminated Plates, Part II: Comparison with the Bending-Gradient Theory, Journal of Elasticity, vol.2, issue.4, pp.1-28, 2016.
DOI : 10.1016/0020-7683(66)90045-X

A. Lebée and K. Sab, The Bending-Gradient Theory for Laminates and In-Plane Periodic Plates Cham. chapter The Bending-Gradient theory for laminates and in-plane periodic plates, pp.113-148978, 2017.

D. Leguillon, A method based on singularity theory to predict edge delamination of laminates, International Journal of Fracture, vol.100, issue.1, pp.105-120, 1999.
DOI : 10.1023/A:1018382422833

D. Leguillon and E. Sanchez-palencia, Computation of Singular Solutions in Elliptic Problems and Elasticity, 1987.

S. G. Lekhnitskii, Theory of elasticity of an anisotropic body, 1981.

A. Lerpiniere, J. Caron, A. Diaz-diaz, and K. Sab, The LS1 model for delamination propagation in multilayered materials at <mml:math altimg="si49.gif" overflow="scroll" xmlns:xocs="http://www.elsevier.com/xml/xocs/dtd" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.elsevier.com/xml/ja/dtd" xmlns:ja="http://www.elsevier.com/xml/ja/dtd" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:tb="http://www.elsevier.com/xml/common/table/dtd" xmlns:sb="http://www.elsevier.com/xml/common/struct-bib/dtd" xmlns:ce="http://www.elsevier.com/xml/common/dtd" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:cals="http://www.elsevier.com/xml/common/cals/dtd" xmlns:sa="http://www.elsevier.com/xml/common/struct-aff/dtd"><mml:mrow><mml:mn>0</mml:mn><mml:mi>??</mml:mi><mml:mo>/</mml:mo><mml:mi>??</mml:mi><mml:mi>??</mml:mi></mml:mrow></mml:math> interfaces: A comparison between experimental and finite elements strain energy release rates, International Journal of Solids and Structures, vol.51, issue.23-24, pp.3973-3986, 2014.
DOI : 10.1016/j.ijsolstr.2014.07.018

M. Levinson, An accurate, simple theory of the statics and dynamics of elastic plates URL: http://www.sciencedirect.com/science, Mechanics Research Communications, vol.780, pp.343-3500093, 1980.

T. Lewinski, Effective models of composite periodic plates???I. Asymptotic solution, International Journal of Solids and Structures, vol.27, issue.9, pp.1155-1172, 1991.
DOI : 10.1016/0020-7683(91)90116-W

T. Lewinski, Effective models of composite periodic plates???II. Simplifications due to symmetries, International Journal of Solids and Structures, vol.27, issue.9, pp.1173-1184, 1991.
DOI : 10.1016/0020-7683(91)90117-X

T. Lewinski, Effective models of composite periodic plates???III. Two-dimensional approaches, International Journal of Solids and Structures, vol.27, issue.9, pp.1185-1203, 1991.
DOI : 10.1016/0020-7683(91)90118-Y

L. Librescu, Elastostatics and kinematics of anisotropic and heterogeneous shell type structures, 1975.

K. H. Lo, R. M. Christensen, and E. M. Wu, A High-Order Theory of Plate Deformation???Part 1: Homogeneous Plates, Journal of Applied Mechanics, vol.44, issue.4, pp.663-668, 1977.
DOI : 10.1115/1.3424154

K. H. Lo, R. M. Christensen, and E. M. Wu, A High-Order Theory of Plate Deformation???Part 2: Laminated Plates, Journal of Applied Mechanics, vol.44, issue.4, pp.669-676, 1977.
DOI : 10.1115/1.3424155

D. S. Marco and I. Ugo, Discrete-layer models for multilayered shells accounting for interlayer continuity, Meccanica, vol.28, pp.281-291, 1993.

C. Mittelstedta and W. Becker, Asymptotic analysis of stress singularities in composite laminates by the boundary finite element method, Composite Structures, vol.71, issue.2, pp.210-219, 2005.
DOI : 10.1016/j.compstruct.2004.10.003

H. Murakami, Laminated Composite Plate Theory With Improved In-Plane Responses, Journal of Applied Mechanics, vol.53, issue.3, pp.661-666, 1986.
DOI : 10.1115/1.3171828

M. Murthy, An improved transverse shear deformation theory for laminated anisotropic plate, 1981.

T. Naciri, A. Ehrlacher, and A. Chabot, Interlaminar stress analysis with a new Multiparticle modelization of Multilayered Materials (M4), Composites Science and Technology, vol.58, issue.3-4, pp.337-343, 1998.
DOI : 10.1016/S0266-3538(97)00085-7

R. B. Nelson and D. R. Lorch, A Refined Theory for Laminated Orthotropic Plates, Journal of Applied Mechanics, vol.41, issue.1, pp.177-183, 1974.
DOI : 10.1115/1.3423219

T. K. Nguyen, K. Sab, and G. Bonnet, First-order shear deformation plate models for functionally graded materials, Composite Structures, vol.83, issue.1, pp.25-36, 2008.
DOI : 10.1016/j.compstruct.2007.03.004
URL : https://hal.archives-ouvertes.fr/hal-00691028

V. T. Nguyen, Finite elements for global and local modelling of multilayered plates. Theses. Ecole des Ponts ParisTech URL: https://pastel.archives-ouvertes, p.1003, 2004.
URL : https://hal.archives-ouvertes.fr/pastel-00001003

V. T. Nguyen and J. F. Caron, A new finite element for free edge effect analysis in laminated composites, Computers & Structures, vol.84, issue.22-23, pp.1538-1546, 2006.
DOI : 10.1016/j.compstruc.2006.01.038

V. T. Nguyen and J. F. Caron, Finite element analysis of free-edge stresses in composite laminates under mechanical an thermal loading, Composites Science and Technology, vol.69, issue.1, pp.40-49, 2009.
DOI : 10.1016/j.compscitech.2007.10.055
URL : https://hal.archives-ouvertes.fr/hal-00563497

A. K. Noor and W. S. Burton, Assessment of Shear Deformation Theories for Multilayered Composite Plates, Applied Mechanics Reviews, vol.42, issue.1, pp.1-13, 1989.
DOI : 10.1115/1.3152418

C. Ossadzow and M. Touratier, An improved shear-membrane theory for multilayered shells, Composite Structures, vol.52, issue.1, pp.85-95, 2001.
DOI : 10.1016/S0263-8223(00)00194-X

N. Pagano, Exact Solutions for Composite Laminates in Cylindrical Bending, Journal of Composite Materials, vol.1, issue.3, pp.398-411, 1969.
DOI : 10.1177/002199836700100402

N. Pagano and R. Pipes, Composite Laminates Under Uniform Axial Extension, Journal of Composite Materials, pp.538-548, 1970.

N. Pagano and S. Soni, Global-local laminate variational model, International Journal of Solids and Structures, vol.19, issue.3, pp.207-228, 1983.
DOI : 10.1016/0020-7683(83)90058-6
URL : http://www.dtic.mil/get-tr-doc/pdf?AD=ADA121747

N. J. Pagano, Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates, Journal of Composite Materials, vol.7, issue.1, pp.20-34, 1970.
DOI : 10.2514/3.5463

N. J. Pagano, Stress fields in composite laminates, International Journal of Solids and Structures, vol.14, issue.5, pp.385-400, 1978.
DOI : 10.1016/0020-7683(78)90020-3

P. , N. J. Hatfield, and H. J. , Elastic behavior of multilayered bidirectional composites, AIAA Journal, vol.10, pp.931-933, 1972.

V. Panc, Theories of elastic plates, 1975.
DOI : 10.1007/978-94-010-1906-4

O. Polit and M. Touratier, A new laminated triangular finite element assuring interface continuity for displacements and stresses, Composite Structures, vol.38, issue.1-4, pp.37-44, 1997.
DOI : 10.1016/S0263-8223(97)00039-1
URL : https://hal.archives-ouvertes.fr/hal-01366946

O. Polit and M. Touratier, A multilayered/sandwich triangular finite element applied to linear and non-linear analyses, Composite Structures, vol.58, issue.1, pp.121-128, 2002.
DOI : 10.1016/S0263-8223(02)00033-8
URL : https://hal.archives-ouvertes.fr/hal-01366941

J. N. Reddy, A Simple Higher-Order Theory for Laminated Composite Plates, Journal of Applied Mechanics, vol.51, issue.4, pp.745-752, 1984.
DOI : 10.1115/1.3167719

J. N. Reddy, A generalization of two-dimensional theories of laminated composite plates, Communications in Applied Numerical Methods, vol.44, issue.3, pp.173-180, 1987.
DOI : 10.1115/1.3424154

J. N. Reddy, On refined computational models of composite laminates, International Journal for Numerical Methods in Engineering, vol.26, issue.2, pp.361-382, 1989.
DOI : 10.1115/1.3424154

E. Reissner, On the Theory of Bending of Elastic Plates, Journal of Mathematics and Physics, vol.23, issue.1-4, pp.184-191, 1944.
DOI : 10.1002/sapm1944231184

E. Reissner, The effects of transverse shear deformation on the bending of elastic plates, Journal of Applied Mechanics, vol.12, pp.69-76, 1945.

E. Reissner, On a Variational Theorem in Elasticity, Journal of Mathematics and Physics, vol.5, issue.1-4, pp.90-95, 1950.
DOI : 10.1090/qam/20440

E. Reissner, On a certain mixed variational theorem and a proposed application, International Journal for Numerical Methods in Engineering, vol.20, issue.7, pp.1366-1368, 1984.
DOI : 10.1002/nme.1620200714

E. Reissner and Y. Stavsky, Bending and Stretching of Certain Types of Heterogeneous Aeolotropic Elastic Plates, Journal of Applied Mechanics, vol.28, issue.3, pp.402-408, 1961.
DOI : 10.1115/1.3641719

J. Ren, A new theory of laminated plate, Composites Science and Technology, vol.26, issue.3, pp.225-2390266, 1986.
DOI : 10.1016/0266-3538(86)90087-4

D. H. Robbins and J. N. Reddy, Modelling of thick composites using a layerwise laminate theory, International Journal for Numerical Methods in Engineering, vol.15, issue.4, pp.655-677, 1993.
DOI : 10.1016/B978-0-08-024249-1.50039-X

K. Sab, A. Lebée, . Wiley-iste, and . Url, Homogenization of Heterogeneous Thin and Thick Plates, 2015.
DOI : 10.1002/9781119005247
URL : https://hal.archives-ouvertes.fr/hal-01266702

N. Saeedi, K. Sab, and J. F. Caron, Delaminated multilayered plates under uniaxial extension. Part I: Analytical analysis using a layerwise stress approach, International Journal of Solids and Structures, vol.49, issue.26, pp.3711-3726, 2012.
DOI : 10.1016/j.ijsolstr.2012.08.005
URL : https://hal.archives-ouvertes.fr/hal-00737009

N. Saeedi, K. Sab, and J. F. Caron, Delaminated multilayered plates under uniaxial extension. Part II: Efficient layerwise mesh strategy for the prediction of delamination onset, International Journal of Solids and Structures, vol.49, issue.26, pp.3727-3740, 2012.
DOI : 10.1016/j.ijsolstr.2012.08.003
URL : https://hal.archives-ouvertes.fr/hal-00737009

N. Saeedi, K. Sab, and J. F. Caron, Cylindrical bending of multilayered plates with multi-delamination via a layerwise stress approach, Composite Structures, vol.95, pp.728-739, 2013.
DOI : 10.1016/j.compstruct.2012.08.037

N. Saeedi, K. Sab, and J. F. Caron, Stress analysis of long multilayered plates subjected to invariant loading: Analytical solutions by a layerwise stress model, Composite Structures, vol.100, pp.307-322, 2013.
DOI : 10.1016/j.compstruct.2013.01.003
URL : https://hal.archives-ouvertes.fr/hal-00784351

M. Di-sciuva, Bending, vibration and buckling of simply supported thick multilayered orthotropic plates: An evaluation of a new displacement model, Journal of Sound and Vibration, vol.105, issue.3, pp.425-4420022, 1986.
DOI : 10.1016/0022-460X(86)90169-0

P. Seide, An Improved Approximate Theory for the Bending of Laminated Plates, Mechanics Today, vol.5, pp.451-466, 1980.
DOI : 10.1016/B978-0-08-024249-1.50039-X

N. R. Senthilnathan, S. P. Lim, K. H. Lee, and S. T. Chow, Buckling of Shear-Deformable Plates, AIAA Journal, vol.12, issue.9, pp.1268-1271, 1987.
DOI : 10.1016/0045-7949(84)90200-1

S. Srinivas, A refined analysis of composite laminates, Journal of Sound and Vibration, vol.30, issue.4, pp.495-507, 1973.
DOI : 10.1016/S0022-460X(73)80170-1

S. Srinivas and A. K. Rao, Bending, vibration and buckling of simply supported thick orthotropic rectangular plates and laminates, International Journal of Solids and Structures, vol.6, issue.11, pp.1463-1481, 1970.
DOI : 10.1016/0020-7683(70)90076-4

S. Srinivas and A. K. Rao, Flexure of Thick Rectangular Plates, Journal of Applied Mechanics, vol.40, issue.1, pp.298-299, 1973.
DOI : 10.1115/1.3422947

X. Sun, M. Wisnom, and S. Hallett, Interaction of inter- and intralaminar damage in scaled quasi-static indentation tests: Part 2 ??? Numerical simulation, Composite Structures, vol.136, pp.727-742, 2016.
DOI : 10.1016/j.compstruct.2015.09.062

K. Swaminathan and D. Ragounadin, Analytical solutions using a higher-order refined theory for the static analysis of antisymmetric angle-ply composite and sandwich plates, Composite Structures, vol.64, issue.3-4, pp.405-417, 2004.
DOI : 10.1016/j.compstruct.2003.09.042

M. Tahani and A. Nosier, Edge effects of uniformly loaded cross-ply composite laminates, Materials & Design, vol.24, issue.8, pp.647-658, 2003.
DOI : 10.1016/S0261-3069(03)00098-0

K. Tarun, D. R. , O. , O. C. , and Z. , A refined higher-order c0 plate bending element, Computers and Structures, vol.1582, pp.177-1830045, 1982.

. Techniwood, système constructif industriel composite bois/isolant écologique, panobloc

N. D. Thai, M. Ottavio, and J. F. Caron, Bending analysis of laminated and sandwich plates using a layer-wise stress model, Composite Structures, vol.96, pp.135-142, 2013.
DOI : 10.1016/j.compstruct.2012.08.032
URL : https://hal.archives-ouvertes.fr/hal-01367055

T. C. Ting and S. C. Chou, Edge singularities in anisotropic composites, International Journal of Solids and Structures, vol.17, issue.11, pp.1057-1068, 1981.
DOI : 10.1016/0020-7683(81)90013-5

M. Touratier, An efficient standard plate theory, International Journal of Engineering Science, vol.29, issue.8, pp.901-9160020, 1991.
DOI : 10.1016/0020-7225(91)90165-Y

P. Vannucci, The Design of Laminates as a Global Optimization Problem, Journal of Optimization Theory and Applications, vol.94, issue.2, pp.299-323, 2013.
DOI : 10.1016/j.compstruct.2012.06.014

A. Wang and F. W. Crossman, Some New Results on Edge Effect in Symmetric Composite Laminates, Journal of Composite Materials, vol.5, issue.1, 1977.
DOI : 10.1016/0045-7949(75)90016-4

A. S. Wang and F. W. Crossman, Some New Results on Edge Effect in Symmetric Composite Laminates, Journal of Composite Materials, vol.5, issue.1, pp.92-106, 1977.
DOI : 10.1016/0045-7949(75)90016-4

S. S. Wang and I. Choi, Boundary-Layer Effects in Composite Laminates: Part 1???Free-Edge Stress Singularities, Journal of Applied Mechanics, vol.49, issue.3, pp.541-548, 1982.
DOI : 10.1115/1.3162514

J. M. Whitney, The Effect of Transverse Shear Deformation on the Bending of Laminated Plates, Journal of Composite Materials, vol.3, issue.3, pp.534-547, 1969.
DOI : 10.1177/002199836700100402

J. M. Whitney, Shear Correction Factors for Orthotropic Laminates Under Static Load, Journal of Applied Mechanics, vol.40, issue.1, pp.302-304, 1973.
DOI : 10.1115/1.3422950

J. M. Whitney and N. J. Pagano, Shear Deformation in Heterogeneous Anisotropic Plates, Journal of Applied Mechanics, vol.37, issue.4, pp.1031-1036, 1970.
DOI : 10.1115/1.3408654

J. M. Whitney and C. T. Sun, A higher order theory for extensional motion of laminated composites, Journal of Sound and Vibration, vol.30, issue.1, pp.85-97, 1973.
DOI : 10.1016/S0022-460X(73)80052-5

P. Yang, C. H. Norris, and Y. Stavsky, Elastic wave propagation in heterogeneous plates, International Journal of Solids and Structures, vol.2, issue.4, pp.665-6840020, 1966.
DOI : 10.1016/0020-7683(66)90045-X

W. L. Yin, Free-Edge Effects in Anisotropic Laminates Under Extension, Bending and Twisting, Part I: A Stress-Function-Based Variational Approach, Journal of Applied Mechanics, vol.61, issue.2, pp.410-415, 1994.
DOI : 10.1115/1.2901459