J. Castro, R. Griffith, H. Kia, B. Bogner, M. Kallaur et al., Sheet molding compounds-science and technology Sheet molding compounds-science and technology Sheet molding compounds: science and technology, 1993.

J. Collister and A. A. , Sheet molding compound rheology, 1993.

B. Bonnet, Comportement au choc de materiaux composites pour applications automobiles, 2005.
URL : https://hal.archives-ouvertes.fr/tel-00152868

F. Cara, Etude des parametres du procede SMC influant sur la qualite des pieces, Institut National des Sciences Appliquees de Lyon, 2001.

V. Feuillade, A. Bergeret, J. Quantin, and A. Crespy, Characterisation of glass fibres used in automotive industry for SMC body panels, Composites Part A: Applied Science and Manufacturing, vol.37, issue.10, pp.1536-1580, 2006.
DOI : 10.1016/j.compositesa.2005.11.010

M. Oldenbo, S. Fernberg, and L. Berglund, Mechanical behaviour of SMC composites with toughening and low density additives, Composites Part A: Applied Science and Manufacturing, vol.34, issue.9, pp.875-85, 2003.
DOI : 10.1016/S1359-835X(03)00155-6

A. Kraemer, S. Lin, D. Brabandt, T. Böhlke, and G. Lanza, Quality Control in the Production Process of SMC Lightweight Material, Procedia CIRP, vol.17, pp.772-779, 2014.
DOI : 10.1016/j.procir.2014.01.138

Z. Jendli, Analyse et modelisation multi echelles du comportement mecanique sous sollicitations rapides de composites SMC, 2005.

T. Le, P. Dumont, L. Orgéas, D. Favier, L. Salvo et al., X-ray phase contrast microtomography for the analysis of the fibrous microstructure of SMC composites, Composites Part A: Applied Science and Manufacturing, vol.39, issue.1, pp.91-103, 2008.
DOI : 10.1016/j.compositesa.2007.08.027
URL : https://hal.archives-ouvertes.fr/hal-00374957

O. Guiraud, P. Dumont, L. Orgéas, and D. Favier, Rheometry of compression moulded fibre-reinforced polymer composites: Rheology, compressibility, and friction forces with mould surfaces, Composites Part A: Applied Science and Manufacturing, vol.43, issue.11, pp.2107-2126, 2012.
DOI : 10.1016/j.compositesa.2012.06.006

M. Shokrieh and R. Mosalmani, Modeling of sheet molding compound compression molding under non-isothermal conditions, Journal of Reinforced Plastics and Composites, vol.33, issue.13, pp.1183-98, 2014.
DOI : 10.1177/0731684414526289

P. Dumont, L. Orgéas, D. Favier, P. Pizette, and C. Venet, Compression moulding of SMC: In situ experiments, modelling and simulation, Composites Part A: Applied Science and Manufacturing, vol.38, issue.2, pp.353-68, 2007.
DOI : 10.1016/j.compositesa.2006.03.010
URL : https://hal.archives-ouvertes.fr/hal-00292081

P. Odenberger, H. Andersson, T. Lundström, K. Sun, W. Lee et al., Experimental flow-front visualisation in Thickness optimization of composite plates by Box's complex method considering the process and material parameters in compression molding of SMC, Composites Part A: Applied Science and Manufacturing, vol.1740, pp.1192-1200, 2009.

M. Kim, W. Lee, W. Han, and A. Vautrin, Optimisation of location and dimension of SMC precharge in compression moulding process, Computers & Structures, vol.89, issue.15-16, pp.1523-1557, 2011.
DOI : 10.1016/j.compstruc.2011.04.004
URL : https://hal.archives-ouvertes.fr/hal-00851165

D. Kim, H. Choi, and N. Kim, Experimental investigation and numerical simulation of SMC in compression molding, Journal of Materials Processing Technology, vol.49, issue.3-4, pp.333-377, 1995.
DOI : 10.1016/0924-0136(94)01577-N

K. Kim and Y. Im, Experimental study on physical properties of compression molded SMC parts under plane strain condition, Composite Structures, vol.35, issue.2, pp.131-172, 1996.
DOI : 10.1016/0263-8223(95)00158-1

G. Kotsikos and A. Gibson, Investigation of the squeeze flow behaviour of Sheet Moulding Compounds (SMC), Composites Part A: Applied Science and Manufacturing, vol.29, issue.12, pp.1569-77, 1998.
DOI : 10.1016/S1359-835X(98)00094-3

N. Kluge, T. Lundström, L. Westerberg, and K. Olofsson, Compression moulding of sheet moulding compound: Modelling with computational fluid dynamics and validation, Journal of Reinforced Plastics and Composites, vol.34, issue.6
DOI : 10.1177/0731684415573981

L. Abrams and J. Castro, Predicting molding forces during sheet molding compound (SMC) compression molding, Polymer Composites, vol.24, 2003.
DOI : 10.1002/pc.10029

M. Barone and D. Caulk, A Model for the Flow of a Chopped Fiber Reinforced Polymer Compound in Compression Molding, Journal of Applied Mechanics, vol.53, issue.2, pp.361-70, 1986.
DOI : 10.1115/1.3171765

S. Advani and C. Tucker, A numerical simulation of short fiber orientation in compression molding, Polymer Composites, vol.9, issue.3, pp.164-73, 1990.
DOI : 10.1002/pc.750110305

M. Shirinbayan, J. Fitoussi, F. Meraghni, B. Surowiec, M. Bocquet et al., High strain rate visco-damageable behavior of Advanced Sheet Molding Compound (A-SMC) under tension, Composites Part B: Engineering, vol.82, pp.30-41, 2015.
DOI : 10.1016/j.compositesb.2015.07.010
URL : https://hal.archives-ouvertes.fr/hal-01196382

M. Shirinbayan, J. Fitoussi, M. Bocquet, F. Meraghni, B. Surowiec et al., Multi-scale experimental investigation of the viscous nature of?damage in Advanced Sheet Molding Compound (A-SMC) submitted?to high strain rates, Composites Part B: Engineering, vol.115, 2016.
DOI : 10.1016/j.compositesb.2016.10.061

M. Shirinbayan, J. Fitoussi, N. Abbasnezhad, F. Meraghni, B. Surowiec et al., Overall mechanical characterization of a Low Density Sheet Molding Compound (LD-SMC): Multi-scale damage analysis and strain rate effect, Composites Part B: Engineering, 2017.

P. Dumont, L. Orgéas, L. Corre, S. Favier, and D. , Anisotropic viscous behavior of sheet molding compounds (SMC) during compression molding, International Journal of Plasticity, vol.19, issue.5, pp.625-671, 2003.
DOI : 10.1016/S0749-6419(01)00077-8
URL : https://hal.archives-ouvertes.fr/hal-01005261

B. Esmaeillou, J. Fitoussi, A. Lucas, and A. Tcharkhtchi, Multi-scale experimental analysis of the tension-tension fatigue behavior of a short glass fiber reinforced polyamide composite, Procedia Engineering, vol.10, pp.2117-2139, 2011.
DOI : 10.1016/j.proeng.2011.04.350

J. Fitoussi, G. Guo, and D. Baptiste, A statistical micromechanical model of anisotropic damage for S.M.C. composites, Composites Science and Technology, vol.58, issue.5, pp.759-63, 1998.
DOI : 10.1016/S0266-3538(97)00163-2

Z. Jendli, F. Meraghni, J. Fitoussi, and D. Baptiste, Micromechanical analysis of strain rate effect on damage evolution in sheet molding compound composites, Composites Part A: Applied Science and Manufacturing, vol.35, issue.7-8, pp.779-85, 2004.
DOI : 10.1016/j.compositesa.2004.01.020

Z. Jendli, F. Meraghni, J. Fitoussi, and D. Baptiste, Multi-scales modelling of dynamic behaviour for discontinuous fibre SMC composites, Composites Science and Technology, vol.69, issue.1, pp.97-103, 2009.
DOI : 10.1016/j.compscitech.2007.10.047
URL : https://hal.archives-ouvertes.fr/hal-00563495

Z. Jendli, J. Fitoussi, F. Meraghni, and D. Baptiste, Anisotropic strain rate effects on the fibre?matrix interface decohesion in sheet moulding compound composites, Composites Science and Technology, vol.65, issue.3-4, pp.387-93, 2005.
DOI : 10.1016/j.compscitech.2004.09.027

J. Fitoussi, M. Bocquet, and F. Meraghni, Effect of the matrix behavior on the damage of ethylenepropylene glass fiber reinforced composite subjected to high strain rate tension, Composites Part B: Engineering, vol.45, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00984755

J. Fitoussi, F. Meraghni, Z. Jendli, G. Hug, and D. Baptiste, Experimental methodology for high strain-rates tensile behaviour analysis of polymer matrix composites, Composites Science and Technology, vol.65, issue.14, pp.2174-88, 2005.
DOI : 10.1016/j.compscitech.2005.05.001
URL : https://hal.archives-ouvertes.fr/hal-00303773

G. Farley, Energy Absorption of Composite Materials, Journal of Composite Materials, vol.13, issue.3, pp.267-79, 1983.
DOI : 10.1007/978-1-4684-1033-4_14

H. Huang and R. Talreja, Numerical simulation of matrix micro-cracking in short fiber reinforced polymer composites: Initiation and propagation, Composites Science and Technology, vol.66, issue.15, pp.2743-57, 2006.
DOI : 10.1016/j.compscitech.2006.03.013

H. Lee and S. Simunovic, A damage mechanics model of crack-weakened, chopped fiber composites under impact loading, Composites Part B: Engineering, vol.33, issue.1, pp.25-34, 2002.
DOI : 10.1016/S1359-8368(01)00048-8

S. Baste and A. Gérard, Evaluation of anisotropic damage in composite materials, Evaluation of Anisotropic Damage in Composite Materials, vol.3, 1994.
URL : https://hal.archives-ouvertes.fr/hal-00185327

G. Jacob, J. Fellers, S. Simunovic, and J. Starbuck, Energy Absorption in Polymer Composites for Automotive Crashworthiness, Journal of Composite Materials, vol.26, issue.2, pp.813-50, 2002.
DOI : 10.1177/002199839202600103

L. Yang, Z. Wu, D. Gao, and X. Liu, Microscopic damage mechanisms of fibre reinforced composite laminates subjected to low velocity impact, Computational Materials Science, vol.111, pp.148-56, 2016.
DOI : 10.1016/j.commatsci.2015.09.039

J. Dear and S. Brown, Impact damage processes in reinforced polymeric materials, Composites Part A: Applied Science and Manufacturing, vol.34, issue.5, pp.411-431, 2003.
DOI : 10.1016/S1359-835X(03)00082-4

K. Hour and H. Sehitoglu, Damage Development in a Short Fiber Reinforced Composite, Journal of Composite Materials, vol.27, issue.8, pp.782-805, 1993.
DOI : 10.1177/002199839302700803

D. Krajcinovic and S. Mastilovic, Some fundamental issues of damage mechanics, Mechanics of Materials, vol.21, issue.3, pp.217-247, 1995.
DOI : 10.1016/0167-6636(95)00010-0

B. Audoin and S. Baste, On internal variable in anisotropic damage, Journal of Mechanics-A/Solids, vol.10, pp.587-606, 1991.

J. Lemaitre and J. Chaboche, Mécanique des matériaux solides. Paris: Donud, 1988.

J. Degrieck and W. Van-paepegem, Fatigue damage modeling of fibre-reinforced composite materials: Review, Applied Mechanics Reviews, vol.54, issue.4, pp.279-300, 2001.
DOI : 10.1115/1.1381395

A. Avanzini, G. Donzella, D. Gallina, S. Pandini, and C. Petrogalli, Fatigue behavior and cyclic damage of peek short fiber reinforced composites, Composites Part B: Engineering, vol.45, issue.1, pp.397-406, 2013.
DOI : 10.1016/j.compositesb.2012.06.008

A. Bernasconi, P. Davoli, A. Basile, and A. Filippi, Effect of fibre orientation on the fatigue behaviour of a short glass fibre reinforced polyamide-6, International Journal of Fatigue, vol.29, issue.2, pp.199-208, 2007.
DOI : 10.1016/j.ijfatigue.2006.04.001

A. Launay, Y. Marco, M. Maitournam, I. Raoult, and F. Szmytka, Cyclic behavior of short glass fiber reinforced polyamide for fatigue life prediction of automotive components, Procedia Engineering, vol.2, issue.1, pp.901-911, 2010.
DOI : 10.1016/j.proeng.2010.03.097
URL : https://hal.archives-ouvertes.fr/hal-00525612

S. Wang, H. Suemasu, and E. Chim, Analysis of fatigue damage evolution and associated anisotropic elastic property degradation in random short-fiber composite, Engineering Fracture Mechanics, vol.25, issue.5-6, pp.1084-105, 1987.
DOI : 10.1016/0013-7944(86)90045-7

S. Tamboura, H. Sidhom, H. Baptiste, and J. Fitoussi, Evaluation de la tenue en fatigue du composite SMC R42, Mat?riaux & Techniques, vol.89, issue.3-4, pp.3-4, 2001.
DOI : 10.1051/mattech/200189030003

B. Esmaeillou, P. Ferreira, V. Bellenger, and A. Tcharkhtchi, Fatigue behavior of polyamide 66/glass fiber under various kinds of applied load, Polymer Composites, vol.28, issue.53, pp.540-547, 2012.
DOI : 10.1016/j.ijfatigue.2006.02.031
URL : https://hal.archives-ouvertes.fr/hal-01202696

S. Mortazavian, A. Fatemi, S. Mellott, and A. Khosrovaneh, Effect of cycling frequency and self-heating on fatigue behavior of reinforced and unreinforced thermoplastic polymers, Polymer Engineering & Science, vol.46, issue.10, pp.2005-2013
DOI : 10.1002/mawe.201400376

K. Schladitz, A. Büter, M. Godehardt, O. Wirjadi, J. Fleckenstein et al., Non-destructive characterization of fiber orientation in reinforced SMC as input for simulation based design, Composite Structures, vol.160, pp.195-203, 2017.
DOI : 10.1016/j.compstruct.2016.10.019

J. Chaboche and F. Gallerneau, An overview of the damage approach of durability modelling at elevated temperature, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.14, issue.6, pp.405-423, 2001.
DOI : 10.1016/0022-5096(72)90015-4

A. Bussiba, M. Kupiec, S. Ifergane, R. Piat, and T. Böhlke, Damage evolution and fracture events sequence in various composites by acoustic emission technique, Composites Science and Technology, vol.68, pp.1144-55, 2008.
DOI : 10.1016/j.compscitech.2007.08.032

H. Askes and L. Sluys, Explicit and implicit gradient series in damage mechanics, European Journal of Mechanics - A/Solids, vol.21, issue.3, pp.379-90, 2002.
DOI : 10.1016/S0997-7538(02)01214-7

R. Guerjouma and S. Baste, Evaluation of anisotropic damage in ceramic-ceramic (Sic-Sic) composite by ultrasonic method, Ultrasonics International, vol.89, pp.895-900, 1989.

F. Meraghni, F. Desrumaux, and M. Benzeggagh, Implementation of a constitutive micromechanical model for damage analysis in glass mat reinforced composite structures, Composites Science and Technology, vol.62, issue.16, pp.2087-97, 2002.
DOI : 10.1016/S0266-3538(02)00110-0

J. Shao and J. Rudnicki, A microcrack-based continuous damage model for brittle geomaterials, Mechanics of Materials, vol.32, issue.10, pp.607-626, 2000.
DOI : 10.1016/S0167-6636(00)00024-7

E. Morozov, K. Morozov, and V. Selvarajalu, Progressive damage modelling of SMC composite materials, Composite Structures, vol.62, issue.3-4, pp.361-367, 2003.
DOI : 10.1016/j.compstruct.2003.09.037

K. Derrien, J. Fitoussi, G. Guo, and D. Baptiste, Prediction of the effective damage properties and failure properties of nonlinear anisotropic discontinuous reinforced composites, Computer Methods in Applied Mechanics and Engineering, vol.185, issue.2-4, pp.93-107, 2000.
DOI : 10.1016/S0045-7825(99)00253-4

S. Chaturvedi, C. Sun, and R. Sierakowski, Mechanical characterization of sheet molding compound composites, Polymer Composites, vol.13, issue.3, pp.167-71, 1983.
DOI : 10.4271/790671

S. Wang, D. Goetz, and H. Corten, Shear Fatigue Degradation and Fracture of Random Short-Fiber SMC Composite, Journal of Composite Materials, vol.16, issue.1, pp.2-20, 1984.
DOI : 10.1007/BF02265218

K. Tanaka, T. Kitano, and N. Egami, Effect of fiber orientation on fatigue crack propagation in short-fiber reinforced plastics, Engineering Fracture Mechanics, vol.123, pp.1-15
DOI : 10.1016/j.engfracmech.2014.03.019

J. Fleckenstein, K. Jaschek, A. Büter, and N. Stoess, Fatigue design optimization of safety components made of SMC, Procedia Engineering, vol.10, pp.390-396, 2011.
DOI : 10.1016/j.proeng.2011.04.066

S. Mortazavian and A. Fatemi, Fatigue behavior and modeling of short fiber reinforced polymer composites including anisotropy and temperature effects, International Journal of Fatigue, vol.77, pp.12-27, 2015.
DOI : 10.1016/j.ijfatigue.2015.02.020

M. Shirinbayan, J. Fitoussi, F. Meraghni, B. Surowiec, M. Laribi et al., Coupled effect of loading frequency and amplitude on the fatigue behavior of advanced sheet molding compound (A-SMC), Journal of Reinforced Plastics and Composites, vol.20, issue.4, p.2016
DOI : 10.1177/002199839302700803

V. Bellenger, A. Tcharkhtchi, and P. Castaing, Thermal and mechanical fatigue of a PA66/glass fibers composite material, International Journal of Fatigue, vol.28, issue.10, pp.1348-52, 2006.
DOI : 10.1016/j.ijfatigue.2006.02.031

K. Handa, A. Kato, and I. Narisawa, Fatigue characteristics of a glass-fiber-reinforced polyamide, Journal of Applied Polymer Science, vol.5, issue.13, pp.1783-93, 1999.
DOI : 10.1016/S0161-9160(13)70096-6

A. Dentsoras, E. Kouvaritakis, and M. Laboratory, Effects of vibration frequency on fatigue crack propagation of a polymer at resonance, Engineering Fracture Mechanics, vol.50, issue.4, pp.467-73, 1995.
DOI : 10.1016/0013-7944(94)00226-8

D. Atodrais, S. Putatundaa, and P. Mallick, Fatigue crack growth model and mechanism of a random fiber SMC composite, Polymer Composites, vol.20, pp.240-249, 2004.

H. Zhang, Y. Yao, D. Zhua, B. Mobasherb, and L. Huang, Tensile mechanical properties of basalt fiber reinforced polymer composite under varying strain rates and temperatures, Polymer Testing, vol.51, pp.29-39, 2016.
DOI : 10.1016/j.polymertesting.2016.02.006

S. Pardo, D. Baptiste, F. Decobert, J. Fitoussi, and R. Joannic, Tensile dynamic behaviour of a quasi-unidirectonal E-glass/polyester composite, Composites Science and Technology, vol.62, issue.4, pp.579-84, 2002.
DOI : 10.1016/S0266-3538(01)00152-X

M. Arif, N. Saintier, F. Meraghni, J. Fitoussi, Y. Chemisky et al., Multiscale fatigue damage characterization in short glass fiber reinforced polyamide-66, Composites Part B: Engineering, vol.61, pp.55-65, 2014.
DOI : 10.1016/j.compositesb.2014.01.019
URL : https://hal.archives-ouvertes.fr/hal-00973379

M. Shirinbayan, J. Fitoussi, F. Meraghni, B. Surowiec, M. Bocquet et al., High strain rate viscodamageable behavior of Advanced Sheet Molding Compound (A-SMC) under tension, Composites Part B: Engineering, vol.3670, issue.82, pp.30-41, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01196382

T. Le, P. Dumont, L. Org-eas, D. Favier, L. Salvo et al., X-ray phase contrast microtomography for the analysis of the fibrous microstructure of SMC composites, Composites Part A: Applied Science and Manufacturing, vol.39, issue.1, pp.91-103, 2008.
DOI : 10.1016/j.compositesa.2007.08.027
URL : https://hal.archives-ouvertes.fr/hal-00374957

J. Palmer, L. Savage, O. Ghita, and K. Evans, Sheet moulding compound (SMC) from carbon fibre recyclate, Composites Part A: Applied Science and Manufacturing, vol.41, issue.9, pp.1232-1239, 2010.
DOI : 10.1016/j.compositesa.2010.05.005

J. Fitoussi, G. Guo, and D. M. Baptiste, A statistical micromechanical model of anisotropic damage for S.M.C. composites, Composites Science and Technology, vol.58, issue.5, pp.759-63, 1998.
DOI : 10.1016/S0266-3538(97)00163-2

J. Wulfsberg, A. Herrmann, G. Ziegmann, G. Lonsdorfer, N. St?b et al., Combination of Carbon Fibre Sheet Moulding Compound and Prepreg Compression Moulding in Aerospace Industry, Procedia Engineering, vol.81, pp.1601-1608, 2014.
DOI : 10.1016/j.proeng.2014.10.197

J. Lu, S. Khot, and R. Wool, New sheet molding compound resins from soybean oil. I. Synthesis and characterization, Polymer, vol.46, issue.1, pp.71-80, 2005.
DOI : 10.1016/j.polymer.2004.10.060

O. Guiraud, P. Dumont, L. Org-eas, and D. Favier, Rheometry of compression moulded fibre-reinforced polymer composites: Rheology, compressibility, and friction forces with mould surfaces, Composites Part A: Applied Science and Manufacturing, vol.43, issue.11, pp.2107-2126, 2012.
DOI : 10.1016/j.compositesa.2012.06.006

L. Corre, S. Org-eas, L. Favier, D. Tourabi, A. Maazouz et al., Shear and compression behaviour of sheet moulding compounds, Compos Sci Technol, vol.62, issue.4, pp.571-578, 2002.

N. Naik, P. Yernamma, N. Thoram, R. Gadipatri, and V. Kavala, High strain rate tensile behavior of woven fabric E-glass/epoxy composite, Polymer Testing, vol.29, issue.1, pp.14-22, 2009.
DOI : 10.1016/j.polymertesting.2009.08.010

K. Brown, R. Brooks, and N. Warrior, The static and high strain rate behaviour of a commingled E-glass/polypropylene woven fabric composite, Composites Science and Technology, vol.70, issue.2, pp.272-83, 2009.
DOI : 10.1016/j.compscitech.2009.10.018

G. Jacob, J. Starbuck, J. Fellers, S. Simunovic, and R. Boeman, Strain rate effects on the mechanical properties of polymer composite materials, Journal of Applied Polymer Science, vol.46, issue.1, pp.296-301, 2004.
DOI : 10.1051/jphys:01985004604055100

H. Hsiao and I. Daniel, Strain rate behavior of composite materials, Composites Part B: Engineering, vol.29, issue.5, pp.521-554, 1998.
DOI : 10.1016/S1359-8368(98)00008-0

J. Fitoussi, M. Bocquet, and F. Meraghni, Effect of the matrix behavior on the damage of ethylene?propylene glass fiber reinforced composite subjected to high strain rate tension, Composites Part B: Engineering, vol.45, issue.1, pp.1181-91, 2013.
DOI : 10.1016/j.compositesb.2012.06.011
URL : https://hal.archives-ouvertes.fr/hal-00984755

L. Sun, R. Gibson, F. Gordaninejad, and J. Suhr, Energy absorption capability of nanocomposites: A review, Composites Science and Technology, vol.69, issue.14, pp.2392-409, 2009.
DOI : 10.1016/j.compscitech.2009.06.020

F. Kun, S. Zapperi, and H. Herrmann, Damage in fiber bundle models, The European Physical Journal B, vol.17, issue.2, pp.269-79, 2000.
DOI : 10.1007/PL00011084
URL : http://arxiv.org/abs/cond-mat/9908226

M. Shirinbayan, J. Fitoussi, F. Meraghni, B. Surowiec, M. Bocquet et al., High strain rate visco-damageable behavior of Advanced Sheet Molding Compound (A-SMC) under tension, Composites Part B: Engineering, vol.82, issue.82, pp.30-41, 2015.
DOI : 10.1016/j.compositesb.2015.07.010
URL : https://hal.archives-ouvertes.fr/hal-01196382

G. Farley, Energy Absorption of Composite Materials, Journal of Composite Materials, vol.13, issue.3, pp.267-79, 1983.
DOI : 10.1007/978-1-4684-1033-4_14
URL : http://www.dtic.mil/get-tr-doc/pdf?AD=ADA129020

O. Okoli, The effects of strain rate and failure modes on the failure energy of fibre reinforced composites, Composite Structures, vol.54, issue.2-3, pp.299-303, 2001.
DOI : 10.1016/S0263-8223(01)00101-5

S. Baste, Evaluation of anisotropic damage in composite materials, Eval anisotropic damage Compos Mater, vol.3, pp.2025-2057, 1994.
URL : https://hal.archives-ouvertes.fr/hal-00185327

N. Achour, G. Chatzigeorgiou, F. Meraghni, Y. Chemisky, and J. Fitoussi, Implicit implementation and consistent tangent modulus of a viscoplastic model for polymers, International Journal of Mechanical Sciences, vol.103, pp.297-305, 2015.
DOI : 10.1016/j.ijmecsci.2015.09.010
URL : https://hal.archives-ouvertes.fr/hal-01206545

M. K?-astner, M. Obst, J. Brummund, K. Thielsch, and V. Ulbricht, Inelastic material behavior of polymers ? Experimental characterization, formulation and implementation of a material model, Mechanics of Materials, vol.52, pp.40-57, 2012.
DOI : 10.1016/j.mechmat.2012.04.011

J. Kim and A. Muliana, A time-integration method for the viscoelastic-viscoplastic analyses of polymers and finite element implementation, International Journal for Numerical Methods in Engineering, vol.44, issue.40, pp.550-75, 2009.
DOI : 10.1115/1.3423586

S. Kweon, A. Benzerga, B. Patel, and A. Gupta, Finite element implementation of a macromolecular viscoplastic polymer model An investigation on nonlocal continuum damage models for composite laminated panels, Int J Numer Methods Eng Compos Part B Eng, vol.9460, issue.10, pp.485-94, 2013.

P. Bere, P. Berce, and O. Nemes, Phenomenological fracture model for biaxial fibre reinforced composites, Composites Part B: Engineering, vol.43, issue.5, pp.2237-2280, 2012.
DOI : 10.1016/j.compositesb.2012.01.073

K. Tanaka and T. Mori, The hardening of crystals by non-deforming particles and fibres, Acta Metallurgica, vol.18, issue.8, pp.931-972, 1970.
DOI : 10.1016/0001-6160(70)90020-9

E. Morozov, K. Morozov, and V. Selvarajalu, Damage model development for SMC composites, Composite Structures, vol.62, issue.3-4, pp.373-381, 2003.
DOI : 10.1016/j.compstruct.2003.09.007

T. Lacy, D. Macdowell, and R. Talreja, Gradient concepts for evolution of damage, Mechanics of Materials, vol.31, issue.12, pp.831-60, 1999.
DOI : 10.1016/S0167-6636(99)00029-0

J. Shao and J. Rudnicki, A microcrack-based continuous damage model for brittle geomaterials, Mechanics of Materials, vol.32, issue.10, pp.607-626, 2000.
DOI : 10.1016/S0167-6636(00)00024-7

B. Nedjar, Elastoplastic-damage modelling including the gradient of damage: formulation and computational aspects, International Journal of Solids and Structures, vol.38, issue.30-31, pp.5421-51, 2001.
DOI : 10.1016/S0020-7683(00)00358-9

H. Askes and L. Sluys, Explicit and implicit gradient series in damage mechanics, European Journal of Mechanics - A/Solids, vol.21, issue.3, pp.379-90, 2002.
DOI : 10.1016/S0997-7538(02)01214-7

J. Shao and J. Rudnicki, A microcrack-based continuous damage model for brittle geomaterials, Mechanics of Materials, vol.32, issue.10, pp.607-626, 2000.
DOI : 10.1016/S0167-6636(00)00024-7

F. Aymerich and S. Meili, Damage assessment in an SMC composite by means of ultrasonic techniques, NDT.NET, vol.4, issue.3, 1999.

A. Bussiba, M. Kupiec, S. Ifergane, and R. Piat, Damage evolution and fracture events sequence in various composites by acoustic emission technique, Composites Science and Technology, vol.68, issue.5, pp.1144-55, 2008.
DOI : 10.1016/j.compscitech.2007.08.032

K. Derrien, D. Baptiste, D. Guedra-degeorges, and J. Foulquier, Multiscale modeling of the damaged plastic behavior and failure of Al/SiCp composites, International Journal of Plasticity, vol.15, issue.6, pp.667-85, 1999.
DOI : 10.1016/S0749-6419(99)00009-1

F. Meraghni and M. Benzeggagh, Micromechanical modelling of matrix degradation in randomly oriented discontinuous-fibre composites, Composites Science and Technology, vol.55, issue.2, pp.171-86, 1995.
DOI : 10.1016/0266-3538(95)00096-8

J. Lataillade, M. Delaet, F. Collombet, and C. Wolff, Effects of the intralaminar shear loading rate on the damage of multi-ply composites, International Journal of Impact Engineering, vol.18, issue.6, pp.679-99, 1996.
DOI : 10.1016/0734-743X(95)00059-J

D. Krajcinovic and S. Mastilovic, Some fundamental issues of damage mechanics, Mechanics of Materials, vol.21, issue.3, pp.217-247, 1995.
DOI : 10.1016/0167-6636(95)00010-0

Z. Jendli, F. Meraghni, and J. Fitoussi, Multi-scales modelling of dynamic behaviour for discontinuous fibre SMC composites, Composites Science and Technology, vol.69, issue.1, pp.97-103, 2009.
DOI : 10.1016/j.compscitech.2007.10.047
URL : https://hal.archives-ouvertes.fr/hal-00563495

T. Le, P. Dumont, and L. Orgeás, X-ray phase contrast microtomography for the analysis of the fibrous microstructure of SMC composites, Composites Part A: Applied Science and Manufacturing, vol.39, issue.1, pp.91-103, 2008.
DOI : 10.1016/j.compositesa.2007.08.027
URL : https://hal.archives-ouvertes.fr/hal-00374957

J. Palmer, L. Savage, and O. Ghita, Sheet moulding compound (SMC) from carbon fibre recyclate, Composites Part A: Applied Science and Manufacturing, vol.41, issue.9, pp.1232-1237, 2010.
DOI : 10.1016/j.compositesa.2010.05.005

M. Shirinbayan, J. Fitoussi, and F. Meraghni, High strain rate visco-damageable behavior of Advanced Sheet Molding Compound (A-SMC) under tension, Composites Part B: Engineering, vol.82, pp.30-41, 2015.
DOI : 10.1016/j.compositesb.2015.07.010
URL : https://hal.archives-ouvertes.fr/hal-01196382

C. Guster, G. Pinter, A. Mosenbacher, and W. Eichlseder, Evaluation of a Simulation Process for Fatigue Life Calculation of Short Fibre Reinforced Plastic Components, Procedia Engineering, vol.10, pp.2104-2109, 2011.
DOI : 10.1016/j.proeng.2011.04.348

M. Quaresimin and E. Guglielmino, Influence of Quick Ageing on the Fatigue Behaviour of SMC Composite Materials, Journal of Reinforced Plastics and Composites, vol.20, issue.2, pp.147-165, 2001.
DOI : 10.1177/073168401772678328

A. Bernasconi, P. Davoli, and A. Basile, Effect of fibre orientation on the fatigue behaviour of a short glass fibre reinforced polyamide-6, International Journal of Fatigue, vol.29, issue.2, pp.199-208, 2007.
DOI : 10.1016/j.ijfatigue.2006.04.001

J. Fleckenstein, K. Jaschek, and A. Bu¨terbu¨ter, Fatigue design optimization of safety components made of SMC, Procedia Engineering, vol.10, pp.390-396, 2011.
DOI : 10.1016/j.proeng.2011.04.066

K. Handa, A. Kato, and I. Narisawa, Fatigue characteristics of a glass-fiber-reinforced polyamide, Journal of Applied Polymer Science, vol.5, issue.13, pp.1783-1793, 1999.
DOI : 10.1016/S0161-9160(13)70096-6

Y. Zhou and P. Mallick, Fatigue performance of injection-molded short E-glass fiber reinforced polyamide-6

B. Esmaeillou, P. Ferreira, and V. Bellenger, Fatigue behavior of polyamide 66/glass fiber under various kinds of applied load, Polymer Composites, vol.28, issue.53, pp.540-547, 2012.
DOI : 10.1016/j.ijfatigue.2006.02.031
URL : https://hal.archives-ouvertes.fr/hal-01202696

M. Arif, N. Saintier, and F. Meraghni, Multiscale fatigue damage characterization in short glass fiber reinforced polyamide-66, Composites Part B: Engineering, vol.61, pp.55-65, 2014.
DOI : 10.1016/j.compositesb.2014.01.019
URL : https://hal.archives-ouvertes.fr/hal-00973379

D. Atodrais, S. Putatundaa, and P. Mallick, Fatigue crack growth model and mechanism of a random fiber SMC composite, Polym Compos, vol.20, pp.240-249, 2004.

A. Launay, Y. Marco, and M. Maitournam, Cyclic behavior of short glass fiber reinforced polyamide for fatigue life prediction of automotive components, Procedia Engineering, vol.2, issue.1, pp.901-910, 2010.
DOI : 10.1016/j.proeng.2010.03.097
URL : https://hal.archives-ouvertes.fr/hal-00525612

R. Renz, V. Alstadt, and G. Ehrenstein, Hysteresis Measurements for Characterizing the Dynamic Fatigue of R-SMC, Journal of Reinforced Plastics and Composites, vol.12, issue.1, pp.413-434, 1988.
DOI : 10.1002/pc.750030105

Z. Jendli, J. Fitoussi, and F. Meraghni, Anisotropic strain rate effects on the fibre?matrix interface decohesion in sheet moulding compound composites, Composites Science and Technology, vol.65, issue.3-4, pp.387-393, 2005.
DOI : 10.1016/j.compscitech.2004.09.027

Z. Jendli, F. Meraghni, and J. Fitoussi, Micromechanical analysis of strain rate effect on damage evolution in sheet molding compound composites, Composites Part A: Applied Science and Manufacturing, vol.35, issue.7-8, pp.779-785, 2004.
DOI : 10.1016/j.compositesa.2004.01.020

K. Hour and H. Sehitoglu, Damage Development in a Short Fiber Reinforced Composite, Journal of Composite Materials, vol.27, issue.8, pp.782-805, 1993.
DOI : 10.1177/002199839302700803

D. Houston, J. Hunt, and C. Jiang, Fatigue performance of SMC composite material under different environmental damage and temperature conditions, Society of Plastics Engineers ? 11th annual automotive composites conference and exhibition, ACCE 2011, MSU Management Education Center 811 W. Square Lake Road, pp.13-15, 2011.

J. Palmer, L. Savage, O. R. Ghita, and K. E. Evans, Sheet moulding compound (SMC) from carbon fiber recyclate, Composites Part A: Applied Science and Manufacturing, issue.9, pp.41-1232, 2010.
DOI : 10.1016/j.compositesa.2010.05.005

M. Fette, P. Sander, J. Wulfsberg, H. Zierk, A. Herrmann et al., Optimized and Cost-efficient Compression Molds Manufactured by Selective Laser Melting for the Production of Thermoset Fiber Reinforced Plastic Aircraft Components, Procedia CIRP, vol.35, pp.25-30, 2015.
DOI : 10.1016/j.procir.2015.08.082

B. Huang and L. Zhao, Bridging and toughening of short fibers in SMC and parametric optimum, Composites Part B: Engineering, vol.43, issue.8, pp.43-3146
DOI : 10.1016/j.compositesb.2012.04.016

A. Asadi, F. Baaij, H. Mainka, M. Rademacher, J. Thompson et al., Basalt fibers as a sustainable and cost-effective alternative to glass fibers in sheet molding compound (SMC), Composites Part B: Engineering, vol.123
DOI : 10.1016/j.compositesb.2017.05.017

P. T. Odenberger, H. M. Andersson, and T. S. Lundström, Experimental flow-front visualisation in compression moulding of SMC, Composites Part A: Applied Science and Manufacturing, vol.35, issue.10, pp.35-1125, 2004.
DOI : 10.1016/j.compositesa.2004.03.019

M. S. Kim, W. I. Lee, W. S. Han, A. Vautrin, and C. H. Park, Thickness optimization of composite plates by Box?s complex method considering the process and material parameters in compression molding of SMC, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, pp.40-1192, 2009.
DOI : 10.1016/j.compositesa.2009.05.003

P. Dumont, L. Orgéas, D. Favier, P. Pizette, and C. Venet, Compression moulding of SMC: In situ experiments, modelling and simulation, Composites Part A: Applied Science and Manufacturing, vol.38, issue.2, pp.353-368, 2007.
DOI : 10.1016/j.compositesa.2006.03.010
URL : https://hal.archives-ouvertes.fr/hal-00292081

M. S. Kim, W. I. Lee, W. S. Han, and A. Vautrin, Optimization of location and dimension of SMC pre-charge in compression molding process, Computers & Structures, pp.89-104, 2011.

C. H. Park, W. I. Lee, Y. E. Yoo, and E. G. Kim, A study on fiber orientation in the compression molding of fiber reinforced polymer composite material, Journal of Materials Processing Technology, vol.111, issue.1-3, pp.1-3, 2001.
DOI : 10.1016/S0924-0136(01)00523-4

J. Grabalosa, I. Ferrer, A. Zúñiga, and J. Ciurana, Influence of processing conditions on manufacturing polyamide parts by ultrasonic molding, Materials & Design, vol.98, pp.20-30, 2016.
DOI : 10.1016/j.matdes.2016.02.122

M. Oldenbo, S. P. Fernberg, and L. A. Berglund, Mechanical behaviour of SMC composites with toughening and low density additives, Composites Part A: Applied Science and Manufacturing, vol.34, issue.9, pp.34-875, 2003.
DOI : 10.1016/S1359-835X(03)00155-6

Z. Jendli, J. Fitoussi, F. Meraghni, and D. Baptiste, Anisotropic strain rate effects on the fibre-matrix interface decohesion in sheet moulding compound composites. Composites Science and Technology, pp.3-4, 2005.

F. Fereshteh-saniee, G. H. Majzoobi, and M. Bahrami, An experimental study on the behavior of glass???epoxy composite at low strain rates, Journal of Materials Processing Technology, vol.162, issue.163, pp.162-163, 2005.
DOI : 10.1016/j.jmatprotec.2005.02.011

S. Gurusideswar, R. Velmurugan, and N. K. Gupta, High strain rate sensitivity of epoxy/clay nanocomposites using non-contact strain measurement, Polymer, vol.86, pp.197-207, 2016.
DOI : 10.1016/j.polymer.2015.12.054

M. Shirinbayan, J. Fitoussi, M. Bocquet, F. Meraghni, B. Surowiec et al., Multi-scale experimental investigation of the viscous nature of??damage in Advanced Sheet Molding Compound (A-SMC) submitted??to high strain rates, Composites Part B: Engineering, vol.115, pp.3-13, 2017.
DOI : 10.1016/j.compositesb.2016.10.061

M. Jaschek, U. Maisl, S. Maisl, U. Mohr, T. Netzelmann et al., Nondestructive characterization of fiber orientation in reinforced SMC as input for simulation based design, Composite Structures, vol.160, pp.195-203, 2017.

M. A. Dupertuis, M. Proctor, and B. Acklin, Generalization of complex Snell?Descartes and Fresnel laws, Journal of the Optical Society of America A, vol.11, issue.3, pp.11-1159, 1994.
DOI : 10.1364/JOSAA.11.001159

D. Krajcinovic and S. Mastilovic, Some fundamental issues of damage mechanics, Mechanics of Materials, vol.21, issue.3, pp.217-230, 1995.
DOI : 10.1016/0167-6636(95)00010-0

D. Krajcinovic, Selection of damage parameter ? Art or science?, Mechanics of Materials, vol.28, issue.1-4, pp.165-179, 1998.
DOI : 10.1016/S0167-6636(97)00057-4

R. M. Bajracharya, A. C. Manalo, W. Karunasena, and K. Lau, An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites, Materials & Design (1980-2015), vol.62, pp.98-112, 2014.
DOI : 10.1016/j.matdes.2014.04.081

V. Feuillade, A. Bergeret, J. C. Quantin, and A. Crespy, Relationships between the glass fibre sizing composition and the surface quality of sheet moulding compounds (SMC) body panels, Composites Science and Technology, vol.66, issue.1
DOI : 10.1016/j.compscitech.2005.05.009

M. Shirinbayan, J. Fitoussi, F. Meraghni, S. Farzaneh, B. Surowiec et al., Post-fatigue residual dynamic behavior of advanced-SMC composites Article in progress. 5. References [1] Thornton PH, Edwards PJ. Energy absorption in composite tubes, Journal of Composite Materials, vol.16, issue.6, pp.521-566, 1982.

A. Uenishi, Y. Kuriyama, H. Yoshida, and M. Takahashi, Material Characterization at High Strain Rates for Optimizing Car Body Structures for Crash Events, Nippon Steel Technical Report, vol.88, 2003.

J. Obradovic, S. Boria, and G. Belingardi, Lightweight design and crash analysis of composite frontal impact energy absorbing structures, Composite Structures, vol.94, issue.2, pp.423-453, 2012.
DOI : 10.1016/j.compstruct.2011.08.005

R. Alia, W. Cantwell, G. Langdon, S. Yuen, and G. Nurick, The energy-absorbing characteristics of composite tube-reinforced foam structures, Composites Part B: Engineering, vol.61, pp.127-162, 2014.
DOI : 10.1016/j.compositesb.2014.01.018

C. Guster, G. Pinter, A. Mosenbacher, and W. Eichlseder, Evaluation of a Simulation Process for Fatigue Life Calculation of Short Fibre Reinforced Plastic Components. Procedia Engineering, pp.2104-2113

D. R. Atodrais, P. S. Mallick, and P. K. , Fatigue crack growth model and mechanism of a random fiber SMC composite, Polymer Composites, vol.20, issue.2, pp.240-249

B. Esmaeillou, P. Ferreira, V. Bellenger, and A. Tcharkhtchi, Fatigue behavior of polyamide 66/glass fiber under various kinds of applied load, Polymer Composites, vol.28, issue.53, pp.540-587
DOI : 10.1016/j.ijfatigue.2006.02.031
URL : https://hal.archives-ouvertes.fr/hal-01202696

M. Shirinbayan, J. Fitoussi, F. Meraghni, B. Surowiec, M. Bocquet et al., High strain rate visco-damageable behavior of Advanced Sheet Molding Compound (A-SMC) under tension, Composites Part B: Engineering, vol.82, issue.82, pp.30-41, 2015.
DOI : 10.1016/j.compositesb.2015.07.010
URL : https://hal.archives-ouvertes.fr/hal-01196382

J. Fitoussi, M. Bocquet, and F. Meraghni, Effect of the matrix behavior on the damage of ethylene???propylene glass fiber reinforced composite subjected to high strain rate tension, Composites Part B: Engineering, vol.45, issue.1, pp.1181-91, 2013.
DOI : 10.1016/j.compositesb.2012.06.011
URL : https://hal.archives-ouvertes.fr/hal-00984755

J. Wp-jia, D. Fernandes, B. Ray, N. Sarkar, and . Bose, Mechanical behaviour and the evolution of the dislocation structure of copper polycrystal deformed under fatigue?tension and tension?fatigue sequential strain paths Impact fatigue behaviour of vinylester resin matrix composites reinforced with alkali treated jute fibres, Materials Science and Composites Part A: Applied Science and Manufacturing, vol.2033, issue.02, pp.233-274, 2002.

J. Epaarachchi, Effects of static?fatigue (tension) on the tension?tension fatigue life of glass fibre reinforced plastic composites, Composite Structures, vol.74, issue.4, pp.419-444, 2005.
DOI : 10.1016/j.compstruct.2005.04.022

M. Shirinbayan, J. Fitoussi, M. Bocquet, F. Meraghni, B. Surowiec et al., Multiscale experimental investigation of the viscous nature of damage in Advanced Sheet Molding Compound (A-SMC) submitted to high strain rates, Composites Part B: Engineering, 2016.

M. Shirinbayan, J. Fitoussi, F. Meraghni, M. Laribi, B. Surowiec et al., Coupled effect of loading frequency and amplitude on the fatigue behavior of advanced sheet molding compound (A-SMC), Journal of Reinforced Plastics and Composites, vol.20, issue.4
DOI : 10.1177/002199839302700803

L. Ye, On fatigue damage accumulation and material degradation in composite materials, Composites Science and Technology, vol.36, issue.4, pp.339-350, 1989.
DOI : 10.1016/0266-3538(89)90046-8

J. Fleckenstein, K. Jaschek, A. Büter, and N. Stoess, Fatigue design optimization of safety components made of SMC. Procedia Engineering, pp.390-396

D. R. Atodaria, S. K. Putatunda, and P. K. Mallick, Fatigue crack growth model and mechanism of a random fiber SMC composite, Polymer Composites, vol.17, issue.2, pp.240-249, 1999.
DOI : 10.1115/1.3656900

]. D. Krajcinovic and S. Mastilovic, Some fundamental issues of damage mechanics, Mechanics of Materials, vol.21, issue.3, pp.217-230, 1995.
DOI : 10.1016/0167-6636(95)00010-0

]. D. Krajcinovic, Selection of damage parameter ? Art or science?, Mechanics of Materials, vol.28, issue.1-4, pp.165-179, 1998.
DOI : 10.1016/S0167-6636(97)00057-4