D. Banabic, T. Kuwabara, T. Balan, and D. S. Et-comsa, An anisotropic yield criterion for sheet metals, Journal of Materials Processing Technology, vol.157, issue.158, pp.157-158462, 2004.
DOI : 10.1016/j.jmatprotec.2004.07.106

F. Barbe, L. Decker, D. Jeulin, and G. Et-cailletaud, Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: F.E. model, International Journal of Plasticity, vol.17, issue.4, pp.513-536, 2001.
DOI : 10.1016/S0749-6419(00)00061-9

F. Barlat, J. C. Brem, J. W. Yoon, K. Chung, R. E. Dick et al., Plane stress yield function for aluminum alloy sheets???part 1: theory, International Journal of Plasticity, vol.19, issue.9, pp.1297-1319, 2003.
DOI : 10.1016/S0749-6419(02)00019-0

F. Barlat, J. J. Gracio, M. Lee, E. F. Rauch, and G. Et-vincze, An alternative to kinematic hardening in classical plasticity, International Journal of Plasticity, vol.27, issue.9, pp.1309-1327, 2011.
DOI : 10.1016/j.ijplas.2011.03.003
URL : https://hal.archives-ouvertes.fr/hal-00640043

F. Barlat, D. J. Lege, and J. C. Et-brem, A six-component yield function for anisotropic materials, International Journal of Plasticity, vol.7, issue.7, pp.693-712, 1991.
DOI : 10.1016/0749-6419(91)90052-Z

F. Barlat, Y. Maeda, K. Chung, M. Yanagawa, J. C. Brem et al., Yield function development for aluminum alloy sheets, Journal of the Mechanics and Physics of Solids, vol.45, issue.11-12, pp.4511-121727, 1997.
DOI : 10.1016/S0022-5096(97)00034-3

J. L. Bassani and T. Et-wu, Latent Hardening in Single Crystals II. Analytical Characterization and Predictions, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.435, issue.1893, pp.43521-43562, 1893.
DOI : 10.1098/rspa.1991.0128

S. B. Batdorf and B. Et-budiansky, A mathematical theory of plasticity based on the concept of slip, 1949.

A. Belkhabbaz, B. Bacroix, and R. Et-brenner, Investigation of the elastoplastic behavior of FCC polycrytals using a FFT numerical scheme, Ro. J. Techn. Sci, 2015.

S. Berbenni, V. Favier, X. Lemoine, and M. Et-berveiller, Micromechanical modeling of the elastic-viscoplastic behavior of polycrystalline steels having different microstructures, Materials Science and Engineering: A, vol.372, issue.1-2, pp.128-136, 2004.
DOI : 10.1016/j.msea.2003.11.010
URL : https://hal.archives-ouvertes.fr/hal-00128379

M. Berveiller and A. Et-zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, pp.5-6325, 1978.
DOI : 10.1016/0022-5096(78)90003-0

J. Bishop and R. Hill, CXXVIII. A theoretical derivation of the plastic properties of a polycrystalline face-centred metal, The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, vol.42, issue.334, pp.421298-1307, 1951.
DOI : 10.1098/rsta.1932.0009

L. Bizet, Caractérisation et modélisation du comportement thermomécanique des matériaux métalliques : vers la prise en compte des hétérogénéités microstructurales intrinsèques. phdthesis, 2016.

N. Bonnet, Contribution à l'étude expérimentale et numérique du comportement des toles d'épaisseur submillimétrique, Thèse de doctorat, 2007.

F. Bron and J. Et-besson, A yield function for anisotropic materials Application to aluminum alloys, International Journal of Plasticity, vol.20, issue.4-5, pp.4-5937, 2004.
DOI : 10.1016/j.ijplas.2003.06.001
URL : https://hal.archives-ouvertes.fr/hal-00165873

C. Caer and R. Et-pesci, Caractérisation des microstructures, 2014.

G. Cailletaud, A micromechanical approach to inelastic behaviour of metals, International Journal of Plasticity, vol.8, issue.1, pp.55-73, 1992.
DOI : 10.1016/0749-6419(92)90038-E

G. Cailletaud and P. Et-pilvin, Identification and Inverse Problems : A Modular Approach, p.33, 1993.

J. L. Chaboche and G. Et-rousselier, On the Plastic and Viscoplastic Constitutive Equations???Part I: Rules Developed With Internal Variable Concept, Journal of Pressure Vessel Technology, vol.105, issue.2, pp.153-158, 1983.
DOI : 10.1115/1.3264257

Y. W. Chang and R. J. Et-asaro, An experimental study of shear localization in aluminum-copper single crystals, Acta Metallurgica, vol.29, issue.1, pp.241-257, 1981.
DOI : 10.1016/0001-6160(81)90103-6

Z. Chen, H. J. Bong, D. Li, and R. H. Et-wagoner, The elastic???plastic transition of metals, International Journal of Plasticity, vol.83, pp.178-201, 2016.
DOI : 10.1016/j.ijplas.2016.04.009

A. M. Cuitino and M. Ortiz, Computational modelling of single crystals, Modelling and Simulation in Materials Science and Engineering, vol.1, issue.3, p.225, 1993.
DOI : 10.1088/0965-0393/1/3/001

Y. F. Dafalias and E. P. Et-popov, Plastic Internal Variables Formalism of Cyclic Plasticity, Journal of Applied Mechanics, vol.43, issue.4, pp.645-651, 1976.
DOI : 10.1115/1.3423948

J. Dai, Euler?Rodrigues formula variations, quaternion conjugation and intrinsic connections. Mechanism and Machine Theory, pp.144-152, 2015.
DOI : 10.1016/j.mechmachtheory.2015.03.004
URL : http://doi.org/10.1016/j.mechmachtheory.2015.03.004

F. Delaire, J. L. Raphanel, and C. Et-rey, Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations, Acta Materialia, vol.48, issue.5, pp.1075-1087, 2000.
DOI : 10.1016/S1359-6454(99)00408-5
URL : https://hal.archives-ouvertes.fr/hal-00111290

L. Delannay, Observation and modelling of grain interactions and grain subdivision in rolled cubic polycristals, Thèse de doctorat, 2001.

O. Diard, S. Leclercq, G. Rousselier, and G. Et-cailletaud, Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity, International Journal of Plasticity, vol.21, issue.4, pp.691-722, 2005.
DOI : 10.1016/j.ijplas.2004.05.017
URL : https://hal.archives-ouvertes.fr/hal-00165134

J. K. Dienes, Zur Untersuchung der Rotations-und Spannungsgeschwindigkeit in sich deformierenden K???rpern, Acta Mechanica, vol.80, issue.IIa, 1979.
DOI : 10.1007/978-3-642-88382-8

C. Déprés, M. Fivel, and L. Et-tabourot, A dislocation-based model for low-amplitude fatigue behaviour of face-centred cubic single crystals, Scripta Materialia, vol.58, issue.12, pp.1086-1089, 2008.
DOI : 10.1016/j.scriptamat.2008.02.027

C. Déprés, C. Manole, P. Balland, F. Degré, L. Tabourot et al., Plasticity of cristalline materials : from dislocations to continuum, 2011.

S. Dumoulin, O. Hopperstad, and T. Et-berstad, Investigation of integration algorithms for rate-dependent crystal plasticity using explicit finite element codes, Computational Materials Science, vol.46, issue.4, pp.785-799, 2009.
DOI : 10.1016/j.commatsci.2009.04.015

P. A. Eggertsen and K. Et-mattiasson, On constitutive modeling for springback analysis, International Journal of Mechanical Sciences, vol.52, issue.6, pp.804-818, 2010.
DOI : 10.1016/j.ijmecsci.2010.01.008

P. Eggertsen and K. Et-mattiasson, On the identification of kinematic hardening material parameters for accurate springback predictions, International Journal of Material Forming, vol.27, issue.2, pp.103-120, 2011.
DOI : 10.1016/0020-7403(80)90011-9

U. Engel and R. Et-eckstein, Microforming???from basic research to its realization, Journal of Materials Processing Technology, vol.125, issue.126, pp.125-12635, 2002.
DOI : 10.1016/S0924-0136(02)00415-6

J. D. Eshelby, The Determination of the Elastic Field of an Ellipsoidal Inclusion , and Related Problems, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, pp.241376-396, 1226.

L. P. Evers, W. A. Brekelmans, and M. G. Et-geers, Non-local crystal plasticity model with intrinsic SSD and GND effects, Journal of the Mechanics and Physics of Solids, vol.52, issue.10, pp.522379-2401, 2004.
DOI : 10.1016/j.jmps.2004.03.007

C. Gérard, Mesures de champs et identification de modèles de plasticité cristalline, Thèse de doctorat, 2008.

Y. Guan, F. Pourboghrat, and F. Et-barlat, Finite element modeling of tube hydroforming of polycrystalline aluminum alloy extrusions, International Journal of Plasticity, vol.22, issue.12, pp.2366-2393, 2006.
DOI : 10.1016/j.ijplas.2006.04.003

Y. Guilhem, Étude numérique des champs mécaniques locaux dans les agrégats polycristallins d'acier 316L sous chargement de fatigue, Thèse de doctorat, 2011.

M. E. Gurtin, A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations, Journal of the Mechanics and Physics of Solids, vol.50, issue.1, pp.5-32, 2002.
DOI : 10.1016/S0022-5096(01)00104-1

N. Hansen, The effect of grain size and strain on the tensile flow stress of aluminium at room temperature, Acta Metallurgica, vol.25, issue.8, pp.25863-869, 1977.
DOI : 10.1016/0001-6160(77)90171-7

K. Hibbitt and . Sorensen, ABAQUS : Theory manual, 1992.

R. Hill, A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.193, issue.1033, pp.281-297, 1033.
DOI : 10.1098/rspa.1948.0045

R. Hill, Continuum micro-mechanics of elastoplastic polycrystals, Journal of the Mechanics and Physics of Solids, vol.13, issue.2, pp.89-101, 1965.
DOI : 10.1016/0022-5096(65)90023-2

R. Hill and J. R. Et-rice, Constitutive analysis of elastic-plastic crystals at arbitrary strain, Journal of the Mechanics and Physics of Solids, vol.20, issue.6, pp.401-413, 1972.
DOI : 10.1016/0022-5096(72)90017-8

H. Hoffmann and S. Hong, Tensile Test of very thin Sheet Metal and Determination of Flow Stress Considering the Scaling Effect, CIRP Annals - Manufacturing Technology, vol.55, issue.1, pp.263-266, 2006.
DOI : 10.1016/S0007-8506(07)60412-0

T. J. Hughes, S. Nasser, R. J. Asaro, and G. A. Et-hegemier, Numerical Implementation of Constitutive Models : Rate- Independent Deviatoric Plasticity éditeurs : Theoretical foundation for large-scale computations for nonlinear material behavior, Mechanics of elastic and inelastic solids 6, pp.29-63, 1984.

T. J. Hughes and J. Et-winget, Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis, International Journal for Numerical Methods in Engineering, vol.101, issue.12, pp.1862-1867, 1980.
DOI : 10.1115/1.3454627

K. Kitayama, C. N. Tomé, E. F. Rauch, J. J. Gracio, and F. Et-barlat, A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. Application to low carbon steels, International Journal of Plasticity, vol.46, pp.54-69, 2013.
DOI : 10.1016/j.ijplas.2012.09.004
URL : https://hal.archives-ouvertes.fr/hal-00850219

M. Klein, A. Hadrboletz, B. Weiss, and G. Et-khatibi, The ???size effect??? on the stress???strain, fatigue and fracture properties of thin metallic foils, Materials Science and Engineering: A, vol.319, issue.321, pp.319-321924, 2001.
DOI : 10.1016/S0921-5093(01)01043-7

U. F. Kocks, The relation between polycrystal deformation and single-crystal deformation, Metallurgical and Materials Transactions B, vol.194, issue.5, pp.1121-1143, 1970.
DOI : 10.1080/14786436608212647

E. Kröner, Zur plastischen verformung des vielkristalls, Acta Metallurgica, vol.9, issue.2, pp.155-161, 1961.
DOI : 10.1016/0001-6160(61)90060-8

S. Kuchnicki, A. Cuitiño, and R. Et-radovitzky, Efficient and robust constitutive integrators for single-crystal plasticity modeling, International Journal of Plasticity, vol.22, issue.10, pp.1988-2011, 2006.
DOI : 10.1016/j.ijplas.2006.02.008
URL : http://arxiv.org/abs/cond-mat/0505176

H. Laurent, R. Grèze, M. C. Oliveira, L. F. Menezes, P. Y. Manach et al., Numerical study of springback using the split-ring test for an AA5754 aluminum alloy, Finite Elements in Analysis and Design, vol.46, issue.9, pp.751-759, 2010.
DOI : 10.1016/j.finel.2010.04.004
URL : https://hal.archives-ouvertes.fr/hal-00494094

R. A. Lebensohn and C. N. Et-tomé, A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys, Acta Metallurgica et Materialia, vol.41, issue.9, pp.412611-2624, 1993.
DOI : 10.1016/0956-7151(93)90130-K

E. H. Lee, Elastic-Plastic Deformation at Finite Strains, Journal of Applied Mechanics, vol.36, issue.1, pp.1-6, 1969.
DOI : 10.1115/1.3564580

H. Li, H. Yang, and Z. Et-sun, A robust integration algorithm for implementing rate dependent crystal plasticity into explicit finite element method, International Journal of Plasticity, vol.24, issue.2, pp.267-288, 2008.
DOI : 10.1016/j.ijplas.2007.03.014

L. Li, L. Shen, and G. Et-proust, A texture-based representative volume element crystal plasticity model for predicting Bauschinger effect during cyclic loading, Materials Science and Engineering: A, vol.608, pp.174-183, 2014.
DOI : 10.1016/j.msea.2014.04.067

B. Lin, L. G. Zhao, J. Tong, and H. J. Christ, Crystal plasticity modeling of cyclic deformation for a polycrystalline nickel-based superalloy at high temperature, Materials Science and Engineering: A, vol.527, issue.15, pp.5273581-3587, 2010.
DOI : 10.1016/j.msea.2010.02.045

T. H. Lin, Analysis of elastic and plastic strains of a face-centred cubic crystal, Journal of the Mechanics and Physics of Solids, vol.5, issue.2, pp.143-149, 1957.
DOI : 10.1016/0022-5096(57)90058-3

X. Ling, M. F. Horstemeyer, and G. P. Et-potirniche, On the numerical implementation of 3D rate-dependent single crystal plasticity formulations, International Journal for Numerical Methods in Engineering, vol.21, issue.4, pp.548-568, 2005.
DOI : 10.1115/1.3167194

J. G. Liu, M. W. Fu, J. Lu, and W. L. Et-chan, Influence of size effect on the springback of sheet metal foils in micro-bending, Computational Materials Science, vol.50, issue.9, pp.2604-2614, 2011.
DOI : 10.1016/j.commatsci.2011.04.002

J. Lorrain, Critère de ductilité basé sur la perte d'ellipticité du module tangent élastoplastique déduit d'un modèle autocohérent, Thèse de doctorat, Arts et Métiers ParisTech, 2005.

M. Luo and G. Et-rousselier, Modeling of large strain multi-axial deformation of anisotropic metal sheets with strength-differential effect using a Reduced Texture Methodology, International Journal of Plasticity, vol.53, pp.66-89, 2014.
DOI : 10.1016/j.ijplas.2013.07.006
URL : https://hal.archives-ouvertes.fr/hal-00942623

P. Y. Manach and N. Et-couty, Elastoviscohysteresis constitutive law in convected coordinate frames: application to finite deformation shear tests, Computational Mechanics, vol.28, issue.1, pp.17-25, 2002.
DOI : 10.1007/s004660100265

J. Mandel, Generalisation de la theorie de plasticite de W. T. Koiter, International Journal of Solids and Structures, vol.1, issue.3, pp.273-295, 1965.
DOI : 10.1016/0020-7683(65)90034-X

C. Manole, Analyse des contraintes internes dans les monocristaux cfc : vers une nouvelle loi de plasticité cristalline, Thèse de doctorat, 2010.

M. Martiny-weitig, Modélisation par éléments finis sur micro-ordinateur de la mise en forme de tôles minces : application au profilage, validation expérimentale par le moiré, Thèse de doctorat, 1992.

A. Molinari, G. R. Canova, and S. Et-ahzi, A self consistent approach of the large deformation polycrystal viscoplasticity, Acta Metallurgica, vol.35, issue.12, pp.2983-2994, 1987.
DOI : 10.1016/0001-6160(87)90297-5

F. Morestin and M. Et-boivin, On the necessity of taking into account the variation in the Young modulus with plastic strain in elastic-plastic software, Nuclear Engineering and Design, vol.162, issue.1, pp.107-116, 1996.
DOI : 10.1016/0029-5493(95)01123-4

Z. Mróz, On the description of anisotropic workhardening, Journal of the Mechanics and Physics of Solids, vol.15, issue.3, pp.163-175, 1967.
DOI : 10.1016/0022-5096(67)90030-0

H. Mughrabi, Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals, Acta Metallurgica, vol.31, issue.9, pp.311367-1379, 1983.
DOI : 10.1016/0001-6160(83)90007-X

J. Nagtegaal and J. Et-de-jong, Some aspects of non-isotropic work-hardening in finite strain plasticity. Plasticity of Metals at Finite Strain : Theory, Experiment and Computation, pp.65-102, 1982.

A. Needleman, R. Asaro, J. Lemonds, and D. Et-peirce, Finite element analysis of crystalline solids, Computer Methods in Applied Mechanics and Engineering, vol.52, issue.1-3, pp.1-3689, 1985.
DOI : 10.1016/0045-7825(85)90014-3

S. Nemat-nasser, Plasticity : A Treatise on Finite Deformation of Heterogeneous Inelastic Materials, 2004.

N. Nicaise, S. Berbenni, F. Wagner, M. Berveiller, and X. Et-lemoine, Coupled effects of grain size distributions and crystallographic textures on the plastic behaviour of IF steels, International Journal of Plasticity, vol.27, issue.2, pp.232-249, 2011.
DOI : 10.1016/j.ijplas.2010.05.001

J. F. Nye, Some geometrical relations in dislocated crystals, Acta Metallurgica, vol.1, issue.2, pp.153-162, 1953.
DOI : 10.1016/0001-6160(53)90054-6

D. Peirce, R. J. Asaro, and A. Et-needleman, An analysis of nonuniform and localized deformation in ductile single crystals, Acta Metallurgica, vol.30, issue.6, pp.1087-1119, 1982.
DOI : 10.1016/0001-6160(82)90005-0

C. H. Pham, Vrillage de tôles métalliques ultra-minces après emboutissage, 2014.

C. H. Pham, F. Adzima, J. Coer, and P. Et-manach, Anti-Buckling Device for Ultra-Thin Metallic Sheets Under Large and Reversed Shear Strain Paths, Experimental Mechanics, vol.88, issue.8, 2016.
DOI : 10.1080/14786430801894569

C. H. Pham and A. Et-jegat, Rapport interne / caractérisation mécanique et formabilité -XXS Forming, 2015.

P. Pilvin and G. Et-cailletaud, Intergranular and Transgranular Hardening in Viscoplasticity, ?yczkowski, éditeur : Creep in Structures, International Union of Theoretical and Applied Mechanics, pp.171-178, 1991.
DOI : 10.1007/978-3-642-84455-3_21

Y. Qin, Micro-manufacturing engineering and technology, 2010.

R. Quey, P. R. Dawson, and F. Et-barbe, Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing, Computer Methods in Applied Mechanics and Engineering, vol.200, issue.17-20, pp.17-201729, 2011.
DOI : 10.1016/j.cma.2011.01.002
URL : https://hal.archives-ouvertes.fr/hal-00858028

J. Raphanel, G. Ravichandran, and Y. Leroy, Three-dimensional ratedependent crystal plasticity based on Runge?Kutta algorithms for update and consistent linearization, International Journal of Solids and Structures, vol.41, pp.22-23, 2004.
DOI : 10.1016/j.ijsolstr.2004.05.027
URL : https://hal.archives-ouvertes.fr/hal-00091541

E. Rauch and J. Et-schmitt, Dislocation substructures in mild steel deformed in simple shear, Materials Science and Engineering: A, vol.113, pp.441-448, 1989.
DOI : 10.1016/0921-5093(89)90331-6

E. F. Rauch, J. J. Gracio, and F. Et-barlat, Work-hardening model for polycrystalline metals under strain reversal at large strains, Acta Materialia, vol.55, issue.9, pp.2939-2948, 2007.
DOI : 10.1016/j.actamat.2007.01.003
URL : https://hal.archives-ouvertes.fr/hal-00197069

E. F. Rauch, J. J. Gracio, F. Barlat, and G. Et-vincze, Modelling the plastic behaviour of metals under complex loading conditions, Modelling and Simulation in Materials Science and Engineering, vol.19, issue.3, p.35009, 2011.
DOI : 10.1088/0965-0393/19/3/035009
URL : https://hal.archives-ouvertes.fr/hal-00640171

S. H. Rhim, Y. K. Son, and S. I. Et-oh, Punching of Ultra Small Size Hole Array, CIRP Annals - Manufacturing Technology, vol.54, issue.1, pp.261-264, 2005.
DOI : 10.1016/S0007-8506(07)60098-5

J. Rice, Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity, Journal of the Mechanics and Physics of Solids, vol.19, issue.6, pp.433-455, 1971.
DOI : 10.1016/0022-5096(71)90010-X

F. Roters, P. Eisenlohr, L. Hantcherli, D. Tjahjanto, T. Bieler et al., Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications, Acta Materialia, vol.58, issue.4, pp.1152-1211, 2010.
DOI : 10.1016/j.actamat.2009.10.058

J. Rousseau, Cristallographie géométrique et radiocristallographie : avec exercices corrigés, 2000.

. Khatibi, Apparition de bandes de glissement lors d'une traction uniaxiale sur une éprouvette d'aluminium, 2005.

. Geiger, Coupelle en molybdène pour canon à électrons, 2001.

. Wouters, Evolution de la rugosité en surface pour différentes tailles de grains lors d'essais de traction sur une tôle en alliage d'aluminium, p.13, 2005.

. Raphanel, Comparaison des prédictions de la VUMAT (repère global) par rapport à ? est la contrainte dans la direction de traction et ? 12 est la contrainte de cisaillement dans le plan (12), p.59, 2004.

.. Principe-de-fonctionnement-de-germination, Les carrés représentent des éléments finis avec en leur centre un point d'intégration. Les points noirs sont les germes ou générateurs à partir desquels croissent les sphères qui vont regrouper des éléments et former des grains représentés par des couleurs différentes, p.73

.. Microstructure-générée-par-germination, Les couleurs servent uniquement à distinguer les grains les uns des autres, p.75

.. Le-cufe2p, Comparaison essais / modèles pour l'anisotropie de déformation en traction uniaxiale sur, p.106

.. Le-cube2, Comparaison essais / modèles pour l'anisotropie de déformation en traction uniaxiale sur, p.109

. Peirce, à la fin de l'opération de mise en forme et après retour élastique, p.139, 1982.

D. Paramètres-du-modèle-tabourot-la, CPFEM) pour le CuBe2 identifiés sur un essai de traction dans, p.117

D. Paramètres-du-modèle-tabourot-la, CPFEM) pour le CuBe2 identifiés sur un essai de traction dans, p.119