Q. Chen and B. Sundman, Computation of Partial Equilibrium Solidification with Complete Interstitial and Negligible Substitutional Solute Back Diffusion, MATERIALS TRANSACTIONS, vol.43, issue.3, p.551, 2002.
DOI : 10.2320/matertrans.43.551

H. Zhang, K. Nakajima, C. A. Gandin, and J. He, Prediction of Carbide Precipitation Using Partial Equilibrium Approximation in Fe^|^ndash;C^|^ndash;V^|^ndash;W^|^ndash;Cr^|^ndash;Mo High Speed Steels, ISIJ International, vol.53, issue.3, p.493, 2013.
DOI : 10.2355/isijinternational.53.493

P. Shi, TCS steels/Fe-alloys Dtabase, V6.0, Thermo-Calc Software AB, 2008.

M. Hillert, Phase Equilibria, Phase Diagrams and Phase Transformations, p.358, 1998.
DOI : 10.1017/CBO9780511812781

M. Ganesan and P. D. Lee, A technique for characterizing microsegregation in multicomponent alloys and its application to single-crystal superalloy castings, Metallurgical and Materials Transactions A, vol.373, issue.8, p.2191, 2005.
DOI : 10.1016/j.msea.2004.01.030

J. A. Sarreal and G. J. Abbaschian, The effect of solidification rate on microsegregation, Metallurgical Transactions A, vol.2, issue.11, p.2063, 1986.
DOI : 10.1007/BF02811622

B. Giovanola and W. Kurz, Modeling of microsegregation under rapid solidification conditions, Metallurgical Transactions A, vol.65, issue.1, p.260, 1990.
DOI : 10.1007/BF02811995

D. Tourret, C. Gandin, T. Volkmann, and D. M. Herlach, Multiple non-equilibrium phase transformations: Modeling versus electro-magnetic levitation experiment, Acta Materialia, vol.59, issue.11, p.4665, 2011.
DOI : 10.1016/j.actamat.2011.04.013

URL : https://hal.archives-ouvertes.fr/hal-00595250

D. G. Eskin, L. Suyitno, and . Katgerman, Mechanical properties in the semi-solid state and hot tearing of aluminium alloys, Progress in Materials Science, vol.49, issue.5, pp.629-711, 2004.
DOI : 10.1016/S0079-6425(03)00037-9

A. B. Phillion, S. L. Cockcroft, and P. D. Lee, A three-phase simulation of the effect of microstructural features on semi-solid tensile deformation, Acta Materialia, vol.56, issue.16, pp.4328-4366, 2008.
DOI : 10.1016/j.actamat.2008.04.055

M. Sistaninia, A. B. Phillion, J. M. Drezet, and M. Rappaz, Simulation of Semi-Solid Material Mechanical Behavior Using a Combined Discrete/Finite Element Method, Metallurgical and Materials Transactions A, vol.336, issue.222, pp.239-287, 2011.
DOI : 10.1179/mst.1993.9.6.474

T. W. Clyne and G. J. Davies, Solidification and Casting of Metals, pp.275-78, 1977.

Y. M. Won, T. J. Yeo, D. J. Seol, and K. H. Oh, A new criterion for internal crack formation in continuously cast steels, Metallurgical and Materials Transactions B, vol.24, issue.4, pp.779-94, 2000.
DOI : 10.2355/isijinternational1966.24.957

M. Bellet, O. Cerri, M. Bobadilla, and Y. , Modeling Hot Tearing during Solidification of Steels: Assessment and Improvement of Macroscopic Criteria through the Analysis of Two Experimental Tests, Metallurgical and Materials Transactions A, vol.7, issue.11, pp.2705-2722, 2009.
DOI : 10.1007/s11661-009-9955-5

URL : https://hal.archives-ouvertes.fr/hal-00487265

M. Rappaz, J. M. Drezet, and M. Gremaud, A new hot-tearing criterion, Metallurgical and Materials Transactions A, vol.26, issue.2, pp.449-56, 1999.
DOI : 10.1179/030716983803291226

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.361.2155

M. Rappaz, A. Jacot, and W. J. Boettinger, Last-stage solidification of alloys: Theoretical model of dendrite-arm and grain coalescence, Metallurgical and Materials Transactions A, vol.60, issue.3, pp.467-79, 2003.
DOI : 10.1007/s11661-003-0083-3

N. Wang, S. Mokadem, M. Rappaz, and W. Kurz, Solidification cracking of superalloy single- and bi-crystals, Acta Materialia, vol.52, issue.11, pp.3173-82, 2004.
DOI : 10.1016/j.actamat.2004.03.047

T. Matsumiya, M. Ito, H. Kajioka, S. Yamaguchi, and Y. Nakamura, An evaluation of critical strain for internal crack formation in continuously cast slabs., Transactions of the Iron and Steel Institute of Japan, vol.26, issue.6, pp.540-586, 1986.
DOI : 10.2355/isijinternational1966.26.540

Q. Chen and B. Sundman, Computation of Partial Equilibrium Solidification with Complete Interstitial and Negligible Substitutional Solute Back Diffusion, MATERIALS TRANSACTIONS, vol.43, issue.3, pp.551-59, 2002.
DOI : 10.2320/matertrans.43.551

M. Hillert, Phase Equilibria, Phase Diagrams and Phase Transformations, 1998.
DOI : 10.1017/CBO9780511812781

T. Koshikawa, C. A. Gandin, M. Bellet, H. Yamamura, and M. Bobadilla, Computation of Phase Transformation Paths in Steels by a Combination of the Partial- and Para-equilibrium Thermodynamic Approximations, ISIJ International, vol.54, issue.6, pp.1274-82, 2014.
DOI : 10.2355/isijinternational.54.1274

URL : https://hal.archives-ouvertes.fr/hal-01025814

T. Carozzani, C. A. Gandin, H. Digonnet, M. Bellet, K. Zaidat et al., Direct Simulation of a Solidification Benchmark Experiment, Metallurgical and Materials Transactions A, vol.236, issue.2, pp.873-87, 2013.
DOI : 10.1007/s11661-003-0311-x

URL : https://hal.archives-ouvertes.fr/hal-00747567

C. A. Gandin, From constrained to unconstrained growth during directional solidification, Acta Materialia, vol.48, issue.10, pp.2483-501, 2000.
DOI : 10.1016/S1359-6454(00)00070-7

URL : https://hal.archives-ouvertes.fr/hal-01564433

H. Fujii, T. Ohashi, and T. Hiromoto, On the Formation of Internal Cracks in Continuously Cast Slabs, Tetsu-to-Hagane, vol.62, issue.14, pp.1813-1835, 1976.
DOI : 10.2355/tetsutohagane1955.62.14_1813

M. Bellet and V. D. Fachinotti, ALE method for solidification modelling, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.39-41, pp.4355-81, 2004.
DOI : 10.1016/j.cma.2003.11.016

URL : https://hal.archives-ouvertes.fr/hal-00531192

M. Bellet, O. Jaouen, and I. Poitrault, An ALE???FEM approach to the thermomechanics of solidification processes with application to the prediction of pipe shrinkage, International Journal of Numerical Methods for Heat & Fluid Flow, vol.15, issue.2, pp.120-162, 2005.
DOI : 10.1007/BF02782429

URL : https://hal.archives-ouvertes.fr/hal-00517660

B. G. Thomas and M. Bellet, Casting, Division 4: Modeling and Analysis of Casting Processes, pp.449-61, 2008.

S. Iron, . Institute, and . Japan, Mechanical behavior in Continuous Casting, NCID:BN03702225 (Citation Information by National institute of informatics: CiNii), 1985.

P. Shi, TCS steels/Fe-alloys database V6.0, Thermo-Calc Software AB, 2008.

. Thermo-calc, TCCS Manuals, Thermo-Calc software AB

B. Iron and . Steel-research-association, Physical Constants of Some Commercial Steels at Elevated Temperatures (Based on Measurements Made at the National Physical Laboratory, 1953.

G. Lesoult, C. A. Gandin, and N. T. Niane, Segregation during solidification with spongy deformation of the mushy zone, Acta Materialia, vol.51, issue.18, pp.5263-83, 2003.
DOI : 10.1016/S1359-6454(03)00379-3

URL : https://hal.archives-ouvertes.fr/hal-01570897

V. D. Fachinotti, S. Le-corre, N. Triolet, M. Bobadilla, and M. Bellet, Two-phase thermo-mechanical and macrosegregation modelling of binary alloys solidification with emphasis on the secondary cooling stage of steel slab continuous casting processes, International Journal for Numerical Methods in Engineering, vol.26, issue.10, pp.1341-84, 2006.
DOI : 10.1007/978-3-642-11821-0

URL : https://hal.archives-ouvertes.fr/hal-00512766

M. Wu and A. Ludwig, A three-phase model for mixed columnar-equiaxed solidification, Metallurgical and Materials Transactions A, vol.44, issue.479, pp.1613-1631, 2006.
DOI : 10.1007/BF02814231

J. Li, M. Wu, A. Ludwig, and A. Kharicha, Simulation of macrosegregation in a 2.45-ton steel ingot using a three-phase mixed columnar-equiaxed model, International Journal of Heat and Mass Transfer, vol.72, pp.72-668, 2014.
DOI : 10.1016/j.ijheatmasstransfer.2013.08.079

M. Zalo-znik and H. Combeau, An operator splitting scheme for coupling macroscopic transport and grain growth in a two-phase multiscale solidification model: Part I e model and solution scheme, Comput. Mater. Sci, pp.48-49, 2010.

T. Nguyen, H. Combeau, M. Zalo-znik, M. Bellet, and C. Gandin, Multiscale finite element modelling of solidification structures by a splitting method taking into account the transport of equiaxed grains, Proc. MCWASP XIV, 14th Int. Conf. on Modeling of Casting, Welding and Advanced Solidification Processes IOP Conference Series: Materials Science and Engineering, pp.21-26, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01254391

K. Miyazawa and K. Schwerdtfeger, Macrosegregation in continuously cast steel slabs: preliminary theoretical investigation on the effect of steady state bulging, Archiv f??r das Eisenh??ttenwesen, vol.41, issue.11, pp.415-422, 1981.
DOI : 10.2355/tetsutohagane1955.63.8_1297

T. Kajitani, J. M. Drezet, and M. Rappaz, Numerical simulation of deformation-induced segregation in continuous casting of steel, Metallurgical and Materials Transactions A, vol.31, issue.4, 2001.
DOI : 10.1007/BF02658128

J. Domitner, M. Wu, A. Kharicha, A. Ludwig, B. Kaufmann et al., Modeling the Effects of Strand Surface Bulging and Mechanical Softreduction on the Macrosegregation Formation in Steel Continuous Casting, Metallurgical and Materials Transactions A, vol.33, issue.414, pp.1415-1434, 2014.
DOI : 10.1016/S1359-6454(98)00342-5

G. Lesoult, C. Gandin, and N. T. Niane, Segregation during solidification with spongy deformation of the mushy zone, Acta Materialia, vol.51, issue.18, p.51, 2003.
DOI : 10.1016/S1359-6454(03)00379-3

URL : https://hal.archives-ouvertes.fr/hal-01570897

V. D. Fachinotti, S. Le-corre, N. Triolet, M. Bobadilla, and M. Bellet, Two-phase thermo-mechanical and macrosegregation modelling of binary alloys solidification with emphasis on the secondary cooling stage of steel slab continuous casting processes, International Journal for Numerical Methods in Engineering, vol.26, issue.10, pp.67-1341, 2006.
DOI : 10.1007/978-3-642-11821-0

URL : https://hal.archives-ouvertes.fr/hal-00512766

M. Bellet, A two-phase 2D finite element model for macrosegregation in steel continuous casting, Proceedings of the 5th Decennial Int

B. Rivaux, Mod elisation multi echelle des structures de grains et des s egr egations dans les alliages m etalliques, 2011.

M. Wintz, M. Bobadilla, and M. Jolivet, Hot cracking during solidification of steels effect of carbon, sulphur and phosphorus, La Rev. M etall, vol.4, issue.105, 1994.

J. Ni and C. Beckermann, A volume-averaged two-phase model for transport phenomena during solidification, Metallurgical Transactions B, vol.21, issue.3, pp.349-361, 1991.
DOI : 10.1007/BF02671947

M. Bellet and V. D. Fachinotti, ALE method for solidification modelling, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.39-41, pp.4355-4381, 2004.
DOI : 10.1016/j.cma.2003.11.016

URL : https://hal.archives-ouvertes.fr/hal-00531192

M. Bellet, O. Jaouen, and I. Poitrault, An ALE???FEM approach to the thermomechanics of solidification processes with application to the prediction of pipe shrinkage, International Journal of Numerical Methods for Heat & Fluid Flow, vol.15, issue.2, 2005.
DOI : 10.1007/BF02782429

URL : https://hal.archives-ouvertes.fr/hal-00517660

P. Shi and . Steels, Fe-alloys Database V6.0, Thermo-Calc Software AB, 2008.

T. Thermo-calc and . Manuals, Thermo-Calc software AB, 2013.

S. Iron, . Institute, and . Japan, Mechanical Behavior in Continuous Casting, NCID: BN03702225 (Citation Information by National institute of informatics: CiNii), 1985.

A. Palmaers, A. Etienne, and J. Mignon, Calculation of the mechanical and thermal stresses in continuously cast strands, p.99, 1979.

T. Koshikawa, C. A. Gandin, M. Bellet, H. Yamamura, and M. Bobadilla, Computation of Phase Transformation Paths in Steels by a Combination of the Partial- and Para-equilibrium Thermodynamic Approximations, ISIJ International, vol.54, issue.6, pp.1274-1282, 2014.
DOI : 10.2355/isijinternational.54.1274

URL : https://hal.archives-ouvertes.fr/hal-01025814

]. M. Bellet, O. Jaouen, and I. Poitrault, An ALE???FEM approach to the thermomechanics of solidification processes with application to the prediction of pipe shrinkage, International Journal of Numerical Methods for Heat & Fluid Flow, vol.15, issue.2, pp.120-142, 2005.
DOI : 10.1007/BF02782429

URL : https://hal.archives-ouvertes.fr/hal-00517660

]. M. Bellet, O. Cerri, M. Bobadilla, and Y. Chastel, Modeling Hot Tearing during Solidification of Steels: Assessment and Improvement of Macroscopic Criteria through the Analysis of Two Experimental Tests, Metallurgical and Materials Transactions A, vol.7, issue.11, pp.2705-2717, 2009.
DOI : 10.1007/s11661-009-9955-5

URL : https://hal.archives-ouvertes.fr/hal-00487265

]. J. Brimacombe and K. Sorimachi, Crack formation in the continuous casting of steel, Metallurgical Transactions B, vol.20, issue.3, pp.489-505, 1977.
DOI : 10.1179/000844376795050796

]. T. Clyne and G. J. Davies, Solidification and Casting of Metals, pp.275-278, 1977.

]. T. Kajitani-2001, J. M. Kajitani, M. Drezet, and . Rappaz, Numerical simulation of deformation-induced segregation in continuous casting of steel, Metallurgical and Materials Transactions A, vol.31, issue.4, pp.1479-1491, 2001.
DOI : 10.1007/BF02658128

]. W. Lankford, Some considerations of strength and ductility in the continuous-casting process, Metallurgical Transactions, vol.48, issue.6, pp.1331-1357, 1972.
DOI : 10.1179/095066069790138056

]. J. Ni and C. Beckermann, A volume-averaged two-phase model for transport phenomena during solidification, Metallurgical Transactions B, vol.21, issue.3, pp.349-361, 1991.
DOI : 10.1007/BF02671947

]. A. Phillion, S. L. Cockcroft, and P. D. Lee, A three-phase simulation of the effect of microstructural features on semi-solid tensile deformation, Acta Materialia, vol.56, issue.16, pp.4328-4338, 2008.
DOI : 10.1016/j.actamat.2008.04.055

]. M. Rappaz, J. M. Drezet, and M. Gremaud, A new hot-tearing criterion, Metallurgical and Materials Transactions A, vol.26, issue.2, pp.449-456, 1999.
DOI : 10.1179/030716983803291226

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.361.2155

]. P. Shi, TCS steels/Fe-alloys database V6, Thermo-Calc Software AB, 2008.

]. B. Thomas and M. Bellet, Modeling of stress, distortions and hot tearing, In ASM Handbook Volume 15: Casting, Division 4: Modeling and Analysis of Casting Processes, pp.449-461, 2008.

]. N. Wang, S. Mokadem, M. Rappaz, and W. Kurz, Solidification cracking of superalloy single- and bi-crystals, Acta Materialia, vol.52, issue.11, pp.3173-3182, 2004.
DOI : 10.1016/j.actamat.2004.03.047

M. Won, T. J. Yeo, D. J. Seol, K. H. Oh, J. Yamaguchi et al., A new criterion for internal crack formation in continuously cast steels, Metallurgical and Materials Transactions B, vol.24, issue.4, pp.779-794, 2000.
DOI : 10.2355/isijinternational1966.24.957

]. J. Zaragoci-2012, L. Zaragoci, M. Silva, C. A. Bellet, and . Gandin, Welding and Advanced Solidification Processes, Schladming (Austria), Proc. MCWASP XIII, 13th Int. Conf. on Modelling of Casting IOP Conference Series 33 (2012) 012054, 8 pages, pp.53-493, 2012.