. Barker, L. M. Hollenbach-]-b, H. Et, and R. E. , Laser interferometer for measuring high velocities of any reecting surface, Journal of Applied Physics, issue.11, pp.434669-4675, 1972.

A. Begley, M. R. Et, A. , and J. M. , Delamination of thin lms from two-dimensional interface aws at corners and edges, International Journal of Fracture, vol.112, issue.3, pp.205-222, 2001.
DOI : 10.1023/A:1013523927893

. Bégué, Laser Shock Adhesion Test (LASAT) of EB-PVD TBCs: Towards an industrial application, Surface and Coatings Technology, vol.237, pp.305-312, 2013.
DOI : 10.1016/j.surfcoat.2013.07.026

. Berthe, Sate-of-the-art laser adhesion test, 2011.

. Berthe, Laser adhesion test : a tool for bond strength test using high pressure shock induced by laser, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-Optic, 2004.

. Boustie, Eects of inside spallation of a coating on the debonding of its interface with a substrate subjected to a laser shock, Journal of Physics : Condensed Matter, issue.44, p.1410839, 2002.

. Boustie, Study of damage phenomena induced by edge eects into materials under laser driven shocks, Journal of Physics D : Applied Physics, issue.22, p.407103, 2007.

. Caliez, Numerical simulation of EBPVD thermal barrier coatings spallation, Acta Materialia, vol.51, issue.4, pp.1133-1141, 2003.
DOI : 10.1016/S1359-6454(02)00518-9

. Camacho, G. T. Ortiz-]-c, O. Et, and M. , Computational modelling of impact damage in brittle materials, International Journal of Solids and Structures, vol.33, issue.20-22, pp.2899-2938, 1996.
DOI : 10.1016/0020-7683(95)00255-3

C. Et-dávila-]-c, P. P. Et, D. , and C. G. , Mixed-mode decohesion nite elements for the simulation of delamination in composite materials, 2002.

. Cedelle, Influence of stainless steel substrate preheating on surface topography and on millimeter- and micrometer-sized splat formation, Surface and Coatings Technology, vol.201, issue.3-4, pp.1373-1382, 2006.
DOI : 10.1016/j.surfcoat.2006.02.003

URL : https://hal.archives-ouvertes.fr/hal-00131174

. Chaki, Interfacial defects detection in plasma-sprayed ceramic coating components using two stimulated infrared thermography techniques, NDT & E International, vol.44, issue.6, pp.44519-522, 2011.
DOI : 10.1016/j.ndteint.2011.05.008

S. ]. Et, F. , and P. , Formation of solid splats during thermal spray deposition, Journal of Thermal Spray Technology, vol.18, issue.2, pp.148-180, 2009.

. Chiaruttini, A robust meshing algorithm for complex 3d crack growth simulation, IV European Conference on Computational Mechanics, pp.16-21, 2010.

. Chiaruttini, Advanced remeshing techniques for complex 3d crack propagation, 13th International conference on fracture, pp.16-21, 2013.

. Christensen, The stress and spalling behavior of the oxide scale formed on polycrystalline ni 3 al, Acta materialia, issue.9, pp.443813-3821, 1996.

T. ]. Gill and S. C. , Residual stresses in thermal spray coatings and their eect on interfacial adhesion : a review of recent work, Journal of Thermal Spray Technology, vol.5, issue.4, pp.401-418, 1996.

C. Cotterell, B. Et, C. , and Z. , Buckling and cracking of thin lms on compliant substrates under compression, International Journal of Fracture, vol.104, issue.2, pp.169-179, 2000.
DOI : 10.1023/A:1007628800620

. Coupeau, Kinetic evolution of blistering in hydrogen-implanted silicon, Applied Physics Letters, vol.103, issue.3, p.31908, 2013.
DOI : 10.1063/1.4813858.1

URL : https://hal.archives-ouvertes.fr/hal-00869260

J. Cl, Eude du comportement dynamique de matériaux sous choc laser sub-picoseconde, Thèse de doctorat, Ecole Nationale, 2010.

. Darque-ceretti, . Felder, E. Dc, F. Et, and E. , Adhésion et adhérence, 2003.

. Evans, Mechanisms controlling the durability of thermal barrier coatings, Progress in materials science, pp.46505-553, 2001.
DOI : 10.1016/S0079-6425(00)00020-7

. Fabbro, Physical study of laser???produced plasma in confined geometry, Journal of Applied Physics, vol.14, issue.2, pp.775-784, 1990.
DOI : 10.1109/JQE.1978.1069752

. Fabre, Laser Shock Adhesion Test (LASAT) of Electron Beam Physical Vapor Deposited Thermal Barrier Coatings (EB-PVD TBCs), Advanced Materials Research, vol.278, pp.509-514, 2011.
DOI : 10.4028/www.scientific.net/AMR.278.509

URL : https://hal.archives-ouvertes.fr/hal-00624018

. Fauchais, Knowledge Concerning Splat Formation: An Invited Review, Journal of Thermal Spray Technology, vol.13, issue.3, pp.337-360, 2004.
DOI : 10.1361/10599630419670

. Faulhaber, Buckling delamination in compressed multilayers on curved substrates with accompanying ridge cracks, Journal of the Mechanics and Physics of Solids, vol.54, issue.5, pp.1004-1028, 2006.
DOI : 10.1016/j.jmps.2005.11.005

. Franke, Monitoring damage evolution in thermal barrier coatings with thermal wave imaging, Surface and Coatings Technology, vol.200, issue.5-6, pp.2001292-1297, 2005.
DOI : 10.1016/j.surfcoat.2005.07.090

. Gadelmawla, Roughness parameters, Journal of Materials Processing Technology, vol.123, issue.1, pp.133-145, 2002.
DOI : 10.1016/S0924-0136(02)00060-2

. Gioia, G. Ortiz-]-g, O. Et, and M. , Delamination of Compressed Thin Films, Adv. Appl. Mech, vol.33, pp.119-192, 1997.
DOI : 10.1016/S0065-2156(08)70386-7

. Guerain, Local stress determination in chromia-former thanks to micro-Raman spectroscopy: A way to investigate spontaneous delamination processes, Journal of Applied Physics, vol.113, issue.6, p.63502, 2013.
DOI : 10.1016/0013-7944(85)90052-9

. Guipont, Bond strength determination of hydroxyapatite coatings on Ti-6Al-4V substrates using the LAser Shock Adhesion Test (LASAT), Journal of Biomedical Materials Research Part A, vol.5, issue.4, pp.1096-1104, 2010.
DOI : 10.1142/9789814317351_0011

URL : https://hal.archives-ouvertes.fr/hal-00542476

. Hamade, Effect of plasticity and atmospheric pressure on the formation of donut- and croissantlike buckles, Physical Review E, vol.91, issue.1, p.12410, 2015.
DOI : 10.1007/978-3-662-40293-1

URL : https://hal.archives-ouvertes.fr/hal-01216770

. Harvey, Oxide and TBC spallation in ??-NiAl coated systems under mechanical loading, Surface and Coatings Technology, vol.203, issue.5-7, pp.432-436, 2008.
DOI : 10.1016/j.surfcoat.2008.07.037

URL : https://hal.archives-ouvertes.fr/hal-00343417

I. Heilig, W. Et, I. , and O. , Shock waves in channels. Handbook of shock waves, pp.319-396, 2001.

H. Et-roux-]-h, F. Et, R. , and S. , Digital image correlation : from displacement measurement to identication of elastic properties?a review, Strain, vol.42, issue.2, pp.69-80, 2006.

. Huang, Initiation and arrest of an interfacial crack in a four-point bend test, Engineering Fracture Mechanics, vol.72, issue.17, pp.722584-2601, 2005.
DOI : 10.1016/j.engfracmech.2005.04.002

. Hutchinson, The influence of imperfections on the nucleation and propagation of buckling driven delaminations, Journal of the Mechanics and Physics of Solids, vol.48, issue.4, pp.709-734, 2000.
DOI : 10.1016/S0022-5096(99)00050-2

. Hutchinson, J. W. Suo-]-h, S. Et, and Z. , Mixed mode cracking in layered materials Advances in applied mechanics, pp.63-191, 1992.
DOI : 10.1016/s0065-2156(08)70164-9

. Hutchinson, Growth and congurational stability of circular, buckling-driven lm delaminations. Acta metallurgica et materialia, pp.295-308, 1992.
DOI : 10.1016/0956-7151(92)90304-w

A. ]. Et, Y. , and A. S. , Accuracy and computational eciency of nite element models for low velocity impact on composite structures subject to progressive damage and delamination, Journal of Computational and Nonlinear Dynamics, vol.10, issue.6, p.61009, 2015.

. Ichikawa, Evaluation of adhesive strength of thermal-spraye hydroxyapatite coatings using the laser shock adhesion test (lasat) Materials transactions, pp.793-798, 2007.

. Ikeda, An advanced method for measuring the residual stress of deposited film utilizing laser spallation technique, Science and Technology of Advanced Materials, vol.59, issue.60, pp.90-96, 2006.
DOI : 10.1063/1.1564880

. Jensen, Decohesion of a cut prestressed film on a substrate, International Journal of Solids and Structures, vol.26, issue.9-10, pp.1099-1114, 1990.
DOI : 10.1016/0020-7683(90)90018-Q

. Kulkarni, Processing effects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings, Materials Science and Engineering: A, vol.359, issue.1-2, pp.100-111, 2003.
DOI : 10.1016/S0921-5093(03)00342-3

. Kyaw, Simulation of failure of air plasma sprayed thermal barrier coating due to interfacial and bulk cracks using surface-based cohesive interaction and extended finite element method, The Journal of Strain Analysis for Engineering Design, vol.31, issue.2, pp.51132-143, 2016.
DOI : 10.1016/j.matdes.2009.08.005

L. , T. , H. Et, T. , and T. Y. , Relationship between edm parameters and surface crack formation, Journal of Materials Processing Technology, vol.142, issue.3, pp.676-683, 2003.

. Maurel, Influence of substrate strain anisotropy in TBC system failure, Surface and Coatings Technology, vol.206, issue.7, pp.1634-1639, 2011.
DOI : 10.1016/j.surfcoat.2011.06.041

URL : https://hal.archives-ouvertes.fr/hal-00662334

. Maurel, Aluminium oxide spallation on NiAl coating induced by compression, Surface and Coatings Technology, vol.205, issue.10, pp.2053158-3166, 2011.
DOI : 10.1016/j.surfcoat.2010.11.032

URL : https://hal.archives-ouvertes.fr/hal-00570298

. Missoum-benziane, Z-set/zebulon : une suite logicielle pour la mécanique des matériaux et le calcul de structures, 10e colloque national en calcul des structures, Giens, pp.9-13, 2011.

. Moon, An experimental study of the inuence of imperfections on the buckling of compressed thin lms, Acta Materialia, issue.5, pp.501219-1227, 2002.

C. Newaz, G. Et, C. , and X. , Progressive damage assessment in thermal barrier coatings using thermal wave imaging technique, Surface and Coatings Technology, vol.190, issue.1, pp.7-14, 2005.
DOI : 10.1016/j.surfcoat.2004.07.088

P. Et-hannoyer-]-p, J. Et, H. , and B. , Inuence of oxide layer promoted by dc plasma preheating on the adhesion coating and role of the initial surface pretreatment, Surface and interface analysis, vol.30, issue.1, pp.585-588, 2000.

. Réthoré, Extended digital image correlation with crack shape optimization, International Journal for Numerical Methods in Engineering, vol.47, issue.2, pp.248-272, 2008.
DOI : 10.1002/nme.2070

. Runi, Interface step-induced thin-lm delamination and buckling, Acta Materialia, issue.12, pp.614429-4438, 2013.

. Sapardanis, Influence of macroscopic shear loading on the growth of an interfacial crack initiated from a ceramic blister processed by laser shock, Surface and Coatings Technology, vol.291, pp.430-443, 2016.
DOI : 10.1016/j.surfcoat.2016.02.050

URL : https://hal.archives-ouvertes.fr/hal-01306881

. Seisson, Dynamic fragmentation of graphite under laser-driven shocks: Identification of four damage regimes, International Journal of Impact Engineering, vol.91, pp.68-79, 2016.
DOI : 10.1016/j.ijimpeng.2015.12.012

. Sezer, Non-destructive microwave evaluation of TBC delamination induced by acute angle laser drilling, Measurement Science and Technology, vol.18, issue.1, pp.167-175, 2006.
DOI : 10.1088/0957-0233/18/1/021

S. Siegmann-et-brown-]-s, B. Et, and C. , Surface texture correlations with tensile adhesive strength of thermally sprayed coatings using area-scale fractal analysis, Proc. 2nd United Thermal Spray Conference, pp.355-360, 1999.

. Soulignac, Cohesive zone modelling of thermal barrier coatings interfacial properties based on three-dimensional observations and mechanical testing, Surface and Coatings Technology, vol.237, pp.95-104, 2013.
DOI : 10.1016/j.surfcoat.2013.09.065

URL : https://hal.archives-ouvertes.fr/hal-00931692

. Strand, O. T. Whitworth-]-s, W. Et, and T. L. , USING THE HETERODYNE METHOD TO MEASURE VELOCITIES ON SHOCK PHYSICS EXPERIMENTS, AIP Conference proceedings 955, pp.24-29, 2007.
DOI : 10.1063/1.2832921

. Théry, Spallation of two thermal barrier coating systems: experimental study of adhesion and energetic approach to lifetime during cyclic oxidation, Journal of Materials Science, vol.39, issue.7, pp.441726-1733, 2009.
DOI : 10.1179/imr.1993.38.4.193

C. Tolpygo, V. K. Et, C. , and D. R. , Wrinkling of ?-alumina lms grown by thermal oxidation?i. quantitative studies on single crystals of fe?cr?al alloy, Acta Materialia, issue.14, pp.465153-5166, 1998.
DOI : 10.1557/proc-441-397

. Toshio, N. Parks-]-t, P. Et, and D. M. , Determination of elastic t-stress along threedimensional crack fronts using an interaction integral, International Journal of Solids and Structures, issue.13, pp.291597-1611, 1992.

T. Et-hutchinson-]-t, V. Et, H. , and J. W. , Mode iii eects on interface delamination, Journal of the Mechanics and Physics of Solids, vol.56, issue.1, pp.215-229, 2008.

. Valette, Plasma sprayed steel: Adhesion of an alumina film via a w??stite interlayer, Surface and Coatings Technology, vol.202, issue.12, pp.2603-2611, 2008.
DOI : 10.1016/j.surfcoat.2007.09.040

. Van-den and . Bosch, An improved description of the exponential Xu and Needleman cohesive zone law for mixed-mode decohesion, Engineering Fracture Mechanics, vol.73, issue.9, pp.731220-1234, 2006.
DOI : 10.1016/j.engfracmech.2005.12.006

W. Et-evans-]-w, J. Et, E. , and A. G. , Measurement and analysis of buckling and buckle propagation in compressed oxide layers on superalloy substrates, Acta Materialia, issue.14, pp.46-4993, 1998.

W. Et-hutchinson-]-w, Y. Et, H. , and J. W. , Nonlinear delamination mechanics for thin lms, Journal of the Mechanics and Physics of Solids, vol.45, issue.7, pp.1137-1159, 1997.

X. Xu-et-needleman-]-x, N. Et, and A. , Void nucleation by inclusion debonding in a crystal matrix, Modelling and Simulation in Materials Science and Engineering, vol.1, issue.2, pp.111-132, 1993.

. Yildirim, A Numerical Investigation Into Cold Spray Bonding Processes, Journal of Tribology, vol.137, issue.1, p.11102, 2015.
DOI : 10.1115/1.4028471

. Zhao, Fracture toughness measurements of plasma-sprayed thermal barrier coatings using a modied four-point bending method, Surface and Coatings Technology, issue.24, pp.2044066-4074, 2010.

. Zhao, Investigation of interfacial properties of atmospheric plasma sprayed thermal barrier coatings with four-point bending and computed tomography technique, Surface and Coatings Technology, vol.206, issue.23, pp.2064922-4929, 2012.
DOI : 10.1016/j.surfcoat.2012.05.099