221 3.3.5. Evaluation du paramètre de Lode dans les simulations ,
Summary and Interpretation of the CABRI REP-Na Program, Nuclear Technology, vol.54, issue.3, pp.230-250, 2007. ,
DOI : 10.1111/j.1151-2916.1971.tb12230.x
In situ study of hydride precipitation kinetics and re-orientation in Zircaloy using synchrotron radiation, Acta Materialia, vol.58, issue.20, pp.6575-6583, 2010. ,
DOI : 10.1016/j.actamat.2010.07.018
Hydride precipitation and stresses in zircaloy-4 observed by synchrotron X-ray diffraction, Acta Materialia, vol.58, issue.20, pp.6609-6618, 2010. ,
DOI : 10.1016/j.actamat.2010.08.022
Development of advanced expansion due to compression (A-EDC) test method for safety evaluation of degraded nuclear fuel cladding materials, Journal of Nuclear Science and Technology, vol.28, issue.10, pp.52-1232, 2015. ,
DOI : 10.1016/j.nucengdes.2008.03.017
Stress reorientation of hydrides in unirradiated Zircaloy-2 tube specimens, 6th International Symposium on Contribution of Materials Investigations to Improve the Safety and Performance of LWRs, 2006. ,
Cladding tube deformation test for stress reorientation of hybrides, Journal of ASTM International, vol.5, issue.2, pp.635-649, 2008. ,
A review on hydride precipitation in zirconium alloys, Journal of Nuclear Materials, vol.466, pp.12-20, 2015. ,
DOI : 10.1016/j.jnucmat.2015.07.014
The Mathematical Theory of Equilibrium Cracks in Brittle Fracture, Advances in Applied Mechanics, pp.55-129, 1962. ,
DOI : 10.1016/S0065-2156(08)70121-2
Nonlinear Statistical Analysis of Zircaloy-2 Fracture toughness data, 1987. ,
Rupture mechanisms in combined tension and shear???Experiments, International Journal of Solids and Structures, vol.44, issue.6, pp.1768-1786, 2007. ,
DOI : 10.1016/j.ijsolstr.2006.09.031
URL : https://doi.org/10.1016/j.ijsolstr.2006.09.031
Influence of stress state and hydrogen on deformation and failure of Zircaloy-4, 1998. ,
Ductile Fracture by void Growth to coalescence Advances in Applied Mechanics, pp.169-305, 2010. ,
DOI : 10.1016/s0065-2156(10)44003-x
Le comportement du crayon combustible en situations accidentelles, 2013. ,
DOI : 10.1051/jtsfen/2013lat03
An Analytical Criterion to Prevent PCMI Fuel Rod Cladding Failure during RIA Transients, Revue G??n??rale Nucl??aire, issue.2, 2009. ,
DOI : 10.1051/rgn/20102074
A new analytical approach to study the rod ejection accident in PWRs, International Topical Meeting on Light Water Reactor Fuel Performance, pp.602-614, 2005. ,
Effects of hydrogen content and temperature on fracture toughness of Zircaloy-4, Journal of Nuclear Materials, vol.320, issue.3, pp.272-279, 2003. ,
DOI : 10.1016/S0022-3115(03)00193-4
In situ crack growth observation and fracture toughness measurement of hydrogen charged Zircaloy-4, Journal of Nuclear Materials, vol.322, issue.1, pp.57-65, 2003. ,
DOI : 10.1016/S0022-3115(03)00305-2
Influence of the crack-tip hydride concentration on the fracture toughness of Zircaloy-4, Journal of Nuclear Materials, vol.348, issue.1-2, pp.205-212, 2006. ,
DOI : 10.1016/j.jnucmat.2005.09.017
URL : https://hal.archives-ouvertes.fr/hal-00111508
Ductile-to-Brittle Transition Temperature for High-Burnup Cladding Alloys Exposed to Simulated Drying-Storage Conditions, Journal of Nuclear Materials, vol.433, pp.1-3, 2012. ,
DOI : 10.1016/j.jnucmat.2012.10.002
Influence of loading rate and hydrogen content on fracture toughness of Zr-2.5Nb pressure tube material, Journal of Nuclear Materials, vol.465, pp.177-188, 2015. ,
DOI : 10.1016/j.jnucmat.2015.05.050
How to obtain in laboratory representative hydride blisters on zirconium alloys: A survey of surface effect, 16th International Symposium on Zirconium in the Nuclear Industry, 2010. ,
Comparison of the high burn-up corrosion on M5 and low tin Zircaloy-4, 14th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1467, pp.494-525 ,
Comportement du Zircaloy-4 recristallisé : identification du comportement anisotrope pour application à la situation d'accident de réactivité, Thèse de doctorat Mines Paristech, 2015. ,
The precipitation of zirconium hydride in zirconium and zircaloy-2, Journal of Nuclear Materials, vol.42, issue.2, pp.142-160, 1972. ,
DOI : 10.1016/0022-3115(72)90021-9
Influence de la microstructure sur le comportement en fluage thermique d'alliages de zirconium : analyse expérimentale et mise en oeuvre de méthodes d'homogénéisation, Université Paris, vol.13, 2001. ,
Mechanical response of oxidized Zircaloy-4 cladding material submitted to a ring compression test, Journal of Nuclear Materials, vol.384, issue.2, pp.87-95, 2009. ,
DOI : 10.1016/j.jnucmat.2008.10.027
URL : https://hal.archives-ouvertes.fr/hal-00402489
Hydride precipitation and blister growth modelling -progress report n° 1, pp.84-114, 1984. ,
Zirconium hydride blister modelling and the application to the P2-G16 failure, 11th Conference in Structural Mechanics in Reactor Technology, pp.335-340, 1991. ,
The PROMETRA Program: A reliable material database for highly irradiated Zircaloy-4, Zirlo TM and M5 TM fuel claddings, 18th International Conference on Structural Mechanics in Reactor Technology, 2005. ,
The PROMETRA Program: Fuel Cladding Mechanical Behavior under High Strain Rate, Nuclear Technology, vol.16, issue.3, pp.215-229, 2007. ,
DOI : 10.1007/BF02814242
Solubility Limits and Formation of Intermetallic Precipitates in ZrSnFeCr Alloys, 8th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1023, pp.405-422 ,
DOI : 10.1520/STP18878S
Formation and Growth of hydride blisters in Zr-2.5Nb Pressure tubes, Journal of the Korean Nuclear Society, vol.33, issue.2, pp.192-200, 2001. ,
Hydride reorientation in Zircaloy-4 cladding, Journal of Nuclear Materials, vol.373, issue.1-3, pp.319-327, 2008. ,
DOI : 10.1016/j.jnucmat.2007.06.012
Effect of radial hydrides on the axial and hoop mechanical properties of Zircaloy-4 cladding, Journal of Nuclear Materials, vol.362, issue.1, pp.93-103, 2007. ,
DOI : 10.1016/j.jnucmat.2006.11.008
Characteristics of Hydride Precipitation and Reorientation in Spent-Fuel Cladding, 13th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1423, pp.561-582 ,
DOI : 10.1520/STP11406S
Cladding metallurgy and fracture behavior during reactivity-initiated accidents at high burnup, Nuclear Engineering and Design, vol.186, issue.3, pp.411-427, 1998. ,
DOI : 10.1016/S0029-5493(98)00286-6
Effect of thermo-mechanical cycling on zirconium hydride reorientation studied in situ with synchrotron X-ray diffraction, Journal of Nuclear Materials, vol.440, issue.1-3, pp.1-3, 2012. ,
DOI : 10.1016/j.jnucmat.2013.04.047
Hydride platelet reorientation in Zircaloy studied with synchrotron radiation Diffraction, Journal of ASTM International, vol.8, issue.1, 2011. ,
DOI : 10.1520/stp49370t
Evaluation of Zircaloy-2 Pressure Tubes from NPD, ASTM special technical publication 1023, pp.35-49, 1989. ,
DOI : 10.1520/STP18856S
FRAPTRAN: A Computer Code for the Transient Analysis of Oxide Fuel Rods, p.13576, 2001. ,
Hydride-induced embrittlement of Zircaloy-4 cladding under plane strain tension, 2007. ,
The influence of a hydrided layer on the fracture of Zircaloy-4 cladding tubes, International Conference on Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, pp.249-259, 2002. ,
Embrittlement of hydrided Zircaloy-4 under RIA-like conditions, 13th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1423, pp.702-719, 2001. ,
Fracture Toughness Testing of Zircaloy-2 Pressure Tube Material with Radial Hydrides Using Direct-Current Potential Drop, ASTM special technical publication 905, pp.379-400, 1986. ,
DOI : 10.1520/STP17408S
On the energy release rate and the J-integral for 3-D crack configurations, International Journal of Fracture, vol.44, issue.No. 3, pp.183-193, 1982. ,
DOI : 10.1007/BF00250778
A model to describe the anisotropic viscoplastic behaviour of Zircaloy-4 tubes, Journal of Nuclear Materials, vol.238, issue.2-3, pp.135-162, 1996. ,
DOI : 10.1016/S0022-3115(96)00450-3
Mechanical properties of Zircaloy-4 PWR fuel cladding with burnup 54-64MWd/kgU and implications for RIA behavior, 14th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1467, pp.851-872 ,
Contribution à l'analyse de la rupture des composants mécaniques polycristallins, Habilitation à diriger des recherches -Institut National des Sciences Appliquées de Lyon, 2015. ,
Simulating hydride embrittlement on coldworked stress-relieved Zircaloy-4 with Gurson-Tvergaard-Needleman damage model, 18th International Conference on Structural Mechanics in Reactor Technology, 2005. ,
Main lessons learned from RIA testing of LWR Claddings at IRSN on hydride embrittlement, 2009. ,
Influence of temperature and hydrogen content on stressinduced radial hydride precipitation in Zircaloy-4 cladding, Journal of Nuclear Materials, vol.453, pp.1-3, 2014. ,
The issue of stress state during mechanical tests to assess cladding performance during a reactivity-initiated accident (RIA), Journal of Nuclear Materials, vol.412, issue.2, pp.412-250, 2011. ,
DOI : 10.1016/j.jnucmat.2011.03.015
Blister growth in zirconium alloys: experimentation and modeling, Journal of Nuclear Materials, vol.229, pp.36-47, 1996. ,
DOI : 10.1016/0022-3115(95)00204-9
Assessment of hydrogen embrittlement of Zircaloy-2 pressure tubes using unloading compliance and load normalization techniques for determining J???R curves, Journal of Nuclear Materials, vol.264, issue.1-2, pp.20-28, 1999. ,
DOI : 10.1016/S0022-3115(98)00487-5
Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-104, 1960. ,
DOI : 10.1016/0022-5096(60)90013-2
A thermodynamic database for zirconium alloys, Journal of Nuclear Materials, vol.275, issue.3, pp.275-287, 1999. ,
DOI : 10.1016/S0022-3115(99)00125-7
Etude expérimentale et modélisation mécanique de la corrosion sous contrainte des gaines en Zircaloy-4, Thèse de doctorat, 2001. ,
The effect of hydrogen and strain rate on the ???ductile-brittle??? behaviour of zircaloy, Journal of Nuclear Materials, vol.22, issue.2, pp.127-147, 1967. ,
DOI : 10.1016/0022-3115(67)90023-2
The SCANAIR code version 3.2: main features and status of qualification, Technical Committee Meeting on Fuel Behaviour Under Transient and LOCA Conditions, pp.88-101, 2001. ,
Computed X-Ray powder diffraction patterns and densities for corundum, aluminium, zirconium, delta-UZr2, and the zirconium hydrides, 1976. ,
Analysis of the Pressure Tube Failure at Pickering NGS ???A??? Unit 2 Nuclear Systems Department, Canadian Metallurgical Quarterly, vol.24, issue.3, pp.181-188, 1985. ,
DOI : 10.1179/cmq.1985.24.3.181
Transient Response of LWR Fuels (RIA), Comprehensive Nuclear Materials, vol.2, pp.579-593, 2012. ,
DOI : 10.1016/B978-0-08-056033-5.00044-6
Behavior of PWR and BWR fuels during reactivity-initiated accident conditions, International Topical Meeting on Light Water Reactor Fuel Performance, 2000. ,
Fuel failure and fission gas release in high burnup PWR fuels under RIA conditions, Journal of Nuclear Materials, vol.248, pp.249-256, 1997. ,
DOI : 10.1016/S0022-3115(97)00173-6
Effects of Hydride Precipitate Localization and Neutron Fluence on the Ductility of Irradiated Zircaloy-4, 11th International Symposium on Zirconium in the Nuclear Industry, pp.407-430 ,
DOI : 10.1520/STP16183S
Waterside corrosion performance of light water power reactor fuel, Nuclear Energy, vol.31, issue.1, pp.65-86, 1992. ,
Fracture mechanics approach for failure mode analysis in CABRI and NSRR tests, International Topical Meeting on Light Water Reactor Fuel Performance, 2008. ,
Comportement élasto-viscoplastique de tubes en Zircaloy-4 : approche expérimentale et modélisation micromécanique, Thèse de doctorat, 1999. ,
Stress-based nonlocal damage model, International Journal of Solids and Structures, vol.48, issue.25-26, pp.25-26, 2011. ,
DOI : 10.1016/j.ijsolstr.2011.08.012
URL : https://hal.archives-ouvertes.fr/hal-01545303
Failure of hydrided Zircaloy-4 under equal biaxial and plane-strain tensile deformation, Journal of ASTM international, vol.2, issue.6, pp.833-850, 2005. ,
DOI : 10.1520/jai12441
Lattice Parameters, Thermal Expansions, and Gr??neisen Coefficients of Zirconium, 4.2 to 1130??K, Physical Review, vol.19, issue.2, pp.478-484, 1966. ,
DOI : 10.1143/JPSJ.19.1856
Fragilisation du Zircaloy-4 par l'hydrogène : comportement, mécanismes d'endommagement, interaction avec la couche d'oxyde, simulation numérique, Thèse de doctorat, 1998. ,
Anisotropic behavior and rupture of hydrided ZIRCALOY-4 sheets, Metallurgical and Materials Transactions A, vol.19, issue.8, pp.679-690, 2000. ,
DOI : 10.1007/BF02674025
An anisotropic Gurson type model to represent the ductile rupture of hydrided Zircaloy-4 sheets, International Journal of Fracture, vol.105, issue.3, pp.273-293, 2000. ,
DOI : 10.1023/A:1007615513884
The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, issue.582-593, pp.163-198, 1921. ,
DOI : 10.1098/rsta.1921.0006
Delayed hydrogen cracking velocity and J-integral measurements on irradiated BWR cladding, Journal of ASTM International, vol.2, issue.8, pp.1-16, 2005. ,
DOI : 10.1520/jai12434
Fracture Toughness of Zircaloy Cladding Tubes, ASTM special technical publication, vol.1295, pp.435-447, 1996. ,
DOI : 10.1520/STP16184S
Analysis of the cup-cone fracture in a round tensile bar, Acta Metallurgica, vol.32, pp.157-169, 1984. ,
Stress reorientation of hydrides in zirconium???2.5% niobium, Journal of Nuclear Materials, vol.55, issue.1, pp.1-13, 1975. ,
DOI : 10.1016/0022-3115(75)90132-4
Formation de blisters d'hydrures et effet sur la rupture de gaines en Zircaloy-4 détendu non irradié en conditions d'accident d'injection de réactivité (RIA), Thèse de doctorat Mines Paristech, 2012. ,
Formation and characterization of hydride blisters in Zircaloy-4 cladding tubes, Journal of Nuclear Materials, vol.449, issue.1-3, pp.1-3, 2014. ,
DOI : 10.1016/j.jnucmat.2014.03.006
URL : https://hal.archives-ouvertes.fr/hal-00980723
Hydride Blisters Formation, Characterization and Effect on the Fracture of Zircaloy-4 Cladding Tubes under Reactivity Initiated Accident Conditions, Top Fuel, pp.137-143, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-01057285
Fracture of Zircaloy-4 cladding tubes with or without hydride blisters in uniaxial to plane strain conditions with standard and optimized expansion due to compression tests, Materials Science and Engineering: A, vol.604, pp.57-66, 2014. ,
DOI : 10.1016/j.msea.2014.02.075
URL : https://hal.archives-ouvertes.fr/hal-00966156
Thermomechanical loading applied on the cladding tube during the pellet cladding mechanical interaction phase of a rapid reactivity initiated accident, Journal of Nuclear Materials, vol.453, issue.1-3, pp.1-3, 2014. ,
DOI : 10.1016/j.jnucmat.2014.06.046
URL : https://hal.archives-ouvertes.fr/hal-01057281
Fracture toughness of Zr-2.5 wt% Nb pressure tubes, Nuclear Engineering and Design, vol.81, issue.2, pp.159-167, 1984. ,
DOI : 10.1016/0029-5493(84)90003-7
The influence of hydride on fracture toughness of recrystallized Zircaloy-4 cladding, Journal of Nuclear Materials, vol.447, issue.1-3, pp.1-3, 2014. ,
DOI : 10.1016/j.jnucmat.2013.12.028
Effect of hydride orientation on fracture toughness of Zircaloy-4 cladding, Journal of Nuclear Materials, vol.408, issue.1, pp.67-72, 2011. ,
DOI : 10.1016/j.jnucmat.2010.10.068
Brittle-fracture potential of irradiated Zircaloy-2 pressure tubes, Journal of Nuclear Materials, vol.207, pp.103-115, 1993. ,
DOI : 10.1016/0022-3115(93)90252-T
Fracture and tensile properties of Irradiated Zircaloy, 1993. ,
DOI : 10.13182/nt93-a17035
Effect of hydrogen contents on the mechanical properties of Zircaloy-4, Journal of Nuclear Materials, vol.208, issue.1-2, pp.166-179, 1994. ,
DOI : 10.1016/0022-3115(94)90208-9
Analysis of stresses and strains near the end of a crack traversing a plate, Journal of Applied Mechanics, vol.24, pp.361-364, 1957. ,
Linear fracture mechanics, fracture transition, and fracture control, Engineering Fracture Mechanics, vol.1, issue.2, pp.241-257, 1968. ,
DOI : 10.1016/0013-7944(68)90001-5
Prediction of failure of highly irradiated Zircaloy clad tubes under reactivity initiated accidents, 17th International Conference on Structural Mechanics in Reactor Technology, 2003. ,
Computational Assessment of Burnup-Dependent Fuel Failure Thresholds for Reactivity Initiated Accidents, Journal of Nuclear Science and Technology, vol.208, issue.2, pp.546-561, 2006. ,
DOI : 10.1016/0022-3115(94)90331-X
A review of experiments and computer analyses on RIAs, J. I. d, 2009. ,
Hydrogen pickup and redistribution in alpha-annealed Zircaloy-4, 11th International Symposium on Zirconium in the Nuclear Industry, ASTM STP 1295, 1996. ,
DOI : 10.2172/10181237
Effects of hydride morphology on the embrittlement of Zircaloy-4 cladding, Journal of Nuclear Materials, vol.456, pp.235-245, 2014. ,
DOI : 10.1016/j.jnucmat.2014.09.025
A study on hydride reorientation of Zircaloy-4 cladding tube under stress, Journal of Nuclear Materials, vol.456, pp.246-252, 2014. ,
DOI : 10.1016/j.jnucmat.2014.09.032
On the fracture behavior of inhomogeneous materials??????A case study for elastically inhomogeneous bimaterials, International Journal of Solids and Structures, vol.42, issue.2, pp.605-620, 2005. ,
DOI : 10.1016/j.ijsolstr.2004.06.064
Embrittlement of Reactor Core Materials, pp.758-782, 1996. ,
DOI : 10.1520/STP16200S
Analysis of the fracture behavior of hydrided fuel cladding by fracture mechanics, Nuclear Engineering and Design, vol.203, issue.2-3, pp.185-194, 2001. ,
DOI : 10.1016/S0029-5493(00)00323-X
FRAPCON-3 updates, including mixed-oxide fuel properties, Rapport U.S. Nuclear Regulatory Commission, vol.4, p.6534, 2005. ,
Comments on the stability of zirconium hydride phases in Zircaloy, Journal of Nuclear Materials, vol.324, issue.2-3, pp.165-176, 2004. ,
DOI : 10.1016/j.jnucmat.2003.09.013
Simulation avec CAST3M d'essais mécaniques réalisés sur des portions de tubes de gainage de crayons combustibles, pilotés à l'aide d'un régulateur proportionnel intégral dérivé, Présentation orale au Club CAST3M, 2013. ,
Comportement et rupture de gaines en Zircaloy-4 détendu vierges, hydrurées ou irradiées en situation accidentelle de type RIA, 2008. ,
A model to describe the mechanical behavior and the ductile failure of??hydrided Zircaloy-4 fuel claddings between 25????C and 480????C, Journal of Nuclear Materials, vol.466, pp.43-55, 2015. ,
DOI : 10.1016/j.jnucmat.2015.07.026
URL : https://hal.archives-ouvertes.fr/hal-01199626
A model to describe the anisotropic viscoplastic mechanical behavior of fresh and irradiated Zircaloy-4 fuel claddings under RIA loading conditions, Journal of Nuclear Materials, vol.378, issue.1, pp.60-69, 2008. ,
DOI : 10.1016/j.jnucmat.2008.04.017
URL : https://hal.archives-ouvertes.fr/hal-00311854
Behavior and failure of uniformly hydrided Zircaloy-4 fuel claddings between 25??C and 480??C under various stress states, including RIA loading conditions, Engineering Failure Analysis, vol.17, issue.3, pp.683-700, 2010. ,
DOI : 10.1016/j.engfailanal.2009.07.001
URL : https://hal.archives-ouvertes.fr/hal-00461500
Failure characteristics of cladding tubes under RIA conditions, Nuclear Engineering and Design, vol.238, issue.9, pp.2206-2218, 2008. ,
DOI : 10.1016/j.nucengdes.2008.03.017
A generic method for modeling the behavior of anisotropic metallic materials: Application to recrystallized zirconium alloys, Mechanics of Materials, vol.39, issue.5, pp.458-472, 2007. ,
DOI : 10.1016/j.mechmat.2006.07.002
Growth, Fracture, and Nondestructive Evaluation of Hydride Blisters in Zr-2.5 Nb Pressure Tubes, 8th international symposium on Zirconium in the nuclear industry ASTM STP 1023, pp.50-65, 1989. ,
DOI : 10.1520/STP18857S
The formation and characteristics of hydride blisters in cold worked Zircaloy-2 pressure tubes, IAEA Consultants' Meeting, 1994. ,
Materials Science and Technology, A comprehensive Treatment, BRT Frost, vol.10, 1994. ,
Mécanique des matériaux solides, 1985. ,
Failure characteristics of cladding tubes under RIA conditions through electromagnetic forming, 19th International Conference on Structural Mechanics in Reactor Technology, 2007. ,
Failure of Zircaloy cladding under transverse plane-strain deformation, Nuclear Engineering and Design, vol.186, issue.3, pp.379-394, 1998. ,
DOI : 10.1016/S0029-5493(98)00284-2
Estimations non linéaires du comportement global de matériaux hétérogènes en formulation affine : application aux alliages de zirconium, Thèse de doctorat, 1998. ,
A theoritical estimation of fracture toughness of zirconium hydride, Journal of Materials Science Letters, vol.19, issue.19, pp.1697-1699, 2000. ,
DOI : 10.1023/A:1006793911496
Mécanique de la rupture, Les éditions de physique, 1995. ,
The influence of hydrides on the failure behavior of the hydrided fuel cladding tube with outer surface precrack, Top Fuel, 2014. ,
Flat to slant ductile fracture transition: Tomography examination and simulations using shear-controlled void nucleation, Scripta Materialia, vol.65, issue.11, pp.65-1002, 2011. ,
DOI : 10.1016/j.scriptamat.2011.09.004
URL : https://hal.archives-ouvertes.fr/hal-00658608
A review of the Strain Energy Density (SED) approach to analyzing Reactivity Initiated Accident (RIA) in high burnup fuel, 2004. ,
Investigation of Hydride Rim Effect on Failure of Zircaloy-4 Cladding with Tube Burst Test, Journal of Nuclear Science and Technology, vol.208, issue.4, pp.58-65, 2005. ,
DOI : 10.1016/0022-3115(94)90208-9
Modification of the Gurson Model for shear failure, European Journal of Mechanics - A/Solids, vol.27, issue.1, pp.1-17, 2008. ,
DOI : 10.1016/j.euromechsol.2007.08.002
The relationship between gamma and delta hydrides in zirconium-hydrogen alloys of low hydrogen concentration, Journal of Nuclear Materials, issue.3, pp.49-262, 1974. ,
Analyses of surface cracks in finite plates under tension or bending loads, 1979. ,
Hydrides and delayed hydrogen cracking in zirconium and its alloys, International Metal Reviews, vol.28, pp.92-121, 1983. ,
DOI : 10.1179/imr.1983.28.1.92
Approche expérimentale et modélisation micromécanique du comportement des alliages de Zirconium irradiés, Thèse de doctorat, 2003. ,
The virtual crack extension method for nonlinear material behavior, Computer Methods in Applied Mechanics and Engineering, vol.12, issue.3, pp.353-364, 1977. ,
DOI : 10.1016/0045-7825(77)90023-8
Two field multibody method for periodic homogenization in fracture mechanics of nonlinear heterogeneous materials, Engineering Fracture Mechanics, vol.75, issue.11, pp.75-3378, 2008. ,
DOI : 10.1016/j.engfracmech.2007.07.017
URL : https://hal.archives-ouvertes.fr/hal-00572322
The influence of prior deformation on hydride precipitation in zircaloy, Acta Metallurgica et Materialia, vol.40, issue.2, pp.363-372, 1992. ,
DOI : 10.1016/0956-7151(92)90310-B
Hydride precipitation in alpha/Beta zirconium alloys, Acta Metallurgica, issue.9, pp.31-1381, 1983. ,
DOI : 10.1016/0001-6160(83)90008-1
The influence of hydride blisters on the fracture of Zircaloy-4, Journal of Nuclear Materials, vol.322, issue.1, pp.21-35, 2003. ,
DOI : 10.1016/S0022-3115(03)00299-X
Behavior and rupture of hydrided ZIRCALOY-4 tubes and sheets, Metallurgical and Materials Transactions A, vol.70, issue.1, p.29, 1998. ,
DOI : 10.1007/BF02675568
Effect of stress on hydride reorientation in Zirconium alloys, Proceedings of the International Symposium on Solid-Defect Interaction, pp.426-433 ,
Determination of fracture initiation in hydride blisters using acoustic emission, Metallurgical Transactions A, vol.87, issue.9, pp.2247-2257, 1988. ,
DOI : 10.1007/BF02644858
Review of the thermodynamic basis for models of delayed hydride cracking rate in zirconium alloys, Journal of Nuclear Materials, vol.393, issue.2, pp.350-367, 2009. ,
DOI : 10.1016/j.jnucmat.2009.06.022
Evaluation of elastic???viscoplastic self-consistent polycrystal plasticity models for zirconium alloys, International Journal of Solids and Structures, vol.71, pp.308-322, 2015. ,
DOI : 10.1016/j.ijsolstr.2015.07.004
Stress-intensity factors for a wide range of semi-elliptical surface cracks in finite-thickness plates, Engineering Fracture Mechanics, vol.11, issue.4, pp.817-829, 1979. ,
DOI : 10.1016/0013-7944(79)90139-5
A case study on the effect of thermal residual stresses on the crack-driving force in linear-elastic bimaterials, International Journal of Mechanical Sciences, vol.51, issue.7, pp.51-531, 2009. ,
DOI : 10.1016/j.ijmecsci.2009.05.006
A cladding failure model for fuel rods subjected to operational and accident transients Nuclear Fuel Behavior Modeling at High Burnup and its Experimental Support, pp.197-199, 2000. ,
Fuel Analysis and Licensing Code: FALCON MOD01, Theoretical and Numerical Bases, 2004. ,
Fracture Toughness Data for Zirconium Alloys, 2001. ,
Crack growth in the through-thickness direction of hydrided thin-wall Zircaloy sheet, Journal of Nuclear Materials, vol.420, issue.1-3, pp.1-3, 2012. ,
DOI : 10.1016/j.jnucmat.2011.09.005
Crack growth in the through-thickness direction of hydrided thin-wall Zircaloy sheet, Journal of Nuclear Materials, vol.420, issue.1-3, pp.1-3, 2012. ,
DOI : 10.1016/j.jnucmat.2011.09.005
A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks, Journal of Applied Mechanics, vol.35, issue.2, pp.379-386, 1968. ,
DOI : 10.1115/1.3601206
Modeling of the cold work stress relieved Zircaloy-4 cladding tubes mechanical behavior under PWR operating conditions, 17th International Conference on Structural Mechanics in Reactor Technology, 2003. ,
Etude expérimentale et modélisation du comportement viscoplastique anisotrope du Zircaloy-4 dans deux états métallurgiques, Thèse de doctorat, U.F.R. des Sciences et technique de l'université de Franche-Comté, 1995. ,
A simplified ???polycrystalline??? model for viscoplastic and damage finite element analyses, International Journal of Plasticity, vol.22, issue.4, pp.685-712, 2006. ,
DOI : 10.1016/j.ijplas.2005.04.011
Stress Reorientation of Hydrides in Recrystallized Zircaloy-2 Sheet, International Topical Meeting on Light Water Reactor Fuel Performance, 2005. ,
DOI : 10.3327/jnst.41.731
A consistent approach to assess safety criteria for reactivity initiated accidents, Nuclear Engineering and Design, vol.240, issue.1, pp.57-70, 2010. ,
DOI : 10.1016/j.nucengdes.2009.10.025
Formation of Hydride Blisters in Zirconium Alloy Pressure Tubes, Canadian Metallurgical Quarterly, vol.227, issue.3, pp.227-234, 1985. ,
DOI : 10.1016/0022-3115(67)90048-7
Thermomechanical Behavior and Modeling Between 350??C and 400??C of Zircaloy-4 Cladding Tubes From an Unirradiated State to High Fluence (0 to 85???10[sup 24]???nm[sup ???2], E>1???MeV), Journal of Engineering Materials and Technology, vol.122, issue.2, pp.168-176, 2000. ,
DOI : 10.1115/1.482783
High burnup effects on fuel behaviour under accident conditions: the tests CABRI REP-Na, Journal of Nuclear Materials, vol.270, issue.1-2, pp.55-64, 1999. ,
DOI : 10.1016/S0022-3115(98)00895-2
On critical assessment of the use of local and nonlocal damage models for prediction of ductile crack growth and crack path in various loading and boundary conditions, International Journal of Solids and Structures, vol.48, issue.24, pp.48-3365, 2011. ,
DOI : 10.1016/j.ijsolstr.2011.08.006
3D modelling of strain concentration due to PCI within the fuel code ALCYONE, Top Fuel, 2013. ,
1D and 3D Modeling of PCMI during a RIA with ALCYONE V1.1, International Topical Meeting on Light Water Reactor Fuel Performance, 2010. ,
2D simulation of hydride blister cracking during a RIA transient with the fuel code ALCYONE, EPJ Nuclear Sciences & Technologies, vol.51, issue.22, 2016. ,
DOI : 10.1080/00223131.2013.859106
URL : https://hal.archives-ouvertes.fr/cea-01350715
Fracture strength of hydride precipitates in Zr???2.5Nb alloys, Journal of Nuclear Materials, vol.275, issue.3, pp.312-317, 1999. ,
DOI : 10.1016/S0022-3115(99)00132-4
The failure behavior of the cladding with outer surface pre-crack in biaxial stress test, Top Fuel, 2014. ,
J-integral and crack driving force in elastic???plastic materials, Journal of the Mechanics and Physics of Solids, vol.56, issue.9, pp.2876-2895, 2008. ,
DOI : 10.1016/j.jmps.2008.04.003
Fracture toughness of zirconium hydride and its influence on the crack resistance of zirconium alloys, Journal of Nuclear Materials, vol.87, issue.2-3, pp.303-316, 1979. ,
DOI : 10.1016/0022-3115(79)90567-1
Effect of Metallurgical Variables and Temperature on the Fracture Toughness of Zirconium Alloy Pressure Tubes, ASTM special technical publication, vol.939, pp.579-596, 1987. ,
DOI : 10.1520/STP28145S
Influence of hydrogen content on fracture toughness of CWSR Zr???2.5Nb pressure tube alloy, Journal of Nuclear Materials, vol.432, issue.1-3, pp.1-3, 2013. ,
DOI : 10.1016/j.jnucmat.2012.07.046
Stress-reorientation of hydrides and hydride embrittlement of Zr???2.5 wt% Nb pressure tube alloy, Journal of Nuclear Materials, vol.325, issue.1, pp.26-33, 2004. ,
DOI : 10.1016/j.jnucmat.2003.10.009
Hydride blister formation in Zr???2.5wt%Nb pressure tube alloy, Journal of Nuclear Materials, vol.301, issue.2-3, pp.153-164, 2002. ,
DOI : 10.1016/S0022-3115(02)00708-0
Influence of coolant temperature and power pulse width on fuel failure limit under reactivity-initiated accident conditions, International Topical Meeting on Light Water Reactor Fuel Performance, 2011. ,
Failure of high burnup fuels under reactivity-initiated accident conditions, Annals of Nuclear Energy, vol.36, issue.3, pp.380-385, 2009. ,
DOI : 10.1016/j.anucene.2008.12.003
Effect of initial coolant temperature on mechanical fuel failure under reactivity initiated accident conditions, International Topical Meeting on Light Water Reactor Fuel Performance, 2009. ,
On the application of G(??) method and its comparison with De Lorenzi's approach, Nuclear Engineering and Design, vol.135, issue.2, pp.207-224, 1992. ,
DOI : 10.1016/0029-5493(92)90223-I
Analysis on split failure of cladding of high burnup BWR rods in reactivity-initiated accident conditions by RANNS code, Nuclear Engineering and Design, vol.236, issue.2, pp.128-139, 2006. ,
DOI : 10.1016/j.nucengdes.2005.07.009
RANNS Code Analysis on the Local Mechanical Conditions of Cladding of High Burnup Fuel Rods under PCMI in RIA-Simulated Experiments in NSRR, Journal of Nuclear Science and Technology, vol.82, issue.1, pp.1097-1104, 2006. ,
DOI : 10.1016/0022-3115(79)90011-4
Study of secondary intermetallic phase precipitation/dissolution in Zr alloys by high temperature???high sensitivity calorimetry, Journal of Nuclear Materials, vol.372, issue.2-3, pp.367-378, 2008. ,
DOI : 10.1016/j.jnucmat.2007.04.042
Influence of Cladding-Peripheral Hydride on Mechanical Fuel Failure under Reactivity-Initiated Accident Conditions, Journal of Nuclear Science and Technology, vol.1, issue.4, pp.44-733, 2007. ,
DOI : 10.3327/jnst.41.37
Effects of hydrogen contents on the mechanical properties of Zircaloy-4 sheets, Materials Science and Engineering: A, vol.659, pp.172-178, 2016. ,
DOI : 10.1016/j.msea.2016.02.051
Simulation of the fracture behavior of Zircaloy-4 cladding under reactivity-initiated accident conditions with a damage mechanics model combined with fuel performance codes FEMAXI-7 and RANNS, Journal of Nuclear Science and Technology, vol.2, issue.2, pp.208-219, 2014. ,
DOI : 10.1520/JAI12441
Stress Intensity Factor at the Tip of Cladding Incipient Crack in RIA-Simulating Experiments for High-Burnup PWR Fuels, Journal of Nuclear Science and Technology, vol.238, issue.10, pp.46-1012, 2009. ,
DOI : 10.1016/j.nucengdes.2007.10.020
Hydrides reorientation investigation of high burn-up PWR fuel cladding, Journal of Nuclear Materials, vol.464, pp.371-381, 2015. ,
DOI : 10.1016/j.jnucmat.2015.05.003
Hydride reorientation in Zr2.5Nb studied by synchrotron X-ray diffraction, Acta Materialia, issue.20, pp.60-6892, 2012. ,
Evaluation of effect of hydrogen on toughness of Zircaloy-2 by instrumented drop weight impact testing, Journal of Nuclear Materials, vol.350, issue.3, pp.310-319, 2006. ,
DOI : 10.1016/j.jnucmat.2006.01.016
Characterization of the Fracture Toughness of Zircaloy, Nuclear Technology, vol.31, issue.3, p.509, 1972. ,
DOI : 10.13182/NT72-A31219
Variation of Zircaloy Fracture Toughness in Irradiation, ASTM-STP, vol.551, pp.328-354, 1974. ,
DOI : 10.1520/STP32124S
Numerical analysis of zirconium hydride blisters in CANDU reactor pressure tubes, 9th International Conference on Structural Mechanics in Reactor Technology, 1987. ,
Effects of Hydride Morphology on Zr-2.5Nb Fracture Toughness, ASTM special technical publication 1023, pp.66-88, 1989. ,
DOI : 10.1520/STP18858S
A computer model for hydride-blister growth in zirconium alloys, 1985. ,
Analysis of the fracture behavior of a hydrided cladding tube at elevated temperatures by fracture mechanics, Journal of Alloys and Compounds, vol.330, issue.332, pp.330-332, 2002. ,
DOI : 10.1016/S0925-8388(01)01492-X
Thermal and mechanical properties of zirconium hydride, Journal of Alloys and Compounds, vol.293, issue.295, pp.293-295, 1999. ,
DOI : 10.1016/S0925-8388(99)00389-8
The influence of multiaxial states of stress on the hydrogen embrittlement of zirconium alloy sheet, Metallurgical Transactions A, vol.21, issue.4, pp.675-681, 1985. ,
DOI : 10.1007/BF02648336
Characterization of zirconium hydrides and phase field approach to a mesoscopic-scale modelling of their precipitation, 15th International Symposium on Zirconium in the Nuclear Industry, 2007. ,