. P. Abadie, Fissuration par corrosion sous contrainte de l'alliage 600 dans l'eau à haute température : contribution d'une approche phénoménologique à la compréhension des mécanismes, Thèse, Ecole Nationale Supérieure des Mines de Paris, 1998.

T. [. Andresen, M. Angeliu, and . Pollick, Repassivation and crack propagation of Alloy 600 in 288°C water, Corrosion, p.53, 1997.

J. [. Aguilar, H. F. Albarran, L. Lopez, and . Martinez, Microstructural response on the cracking resistance of alloy 600, Materials Letters, vol.61, issue.1, pp.274-277, 2007.
DOI : 10.1016/j.matlet.2006.04.086

O. [. Alexandreanu, W. J. Chopra, and . Shack, The effect of grain orientation on the cracking behavior of Alloy182 in PWR environment, Twelve International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, pp.579-587, 2005.

J. [. Bamford and . Foster, Crack growth and microstructural characterization of alloy 600 PWR vessel head penetration materials, p.271, 1997.

D. [. Bandy and R. Van, Stress Corrosion Cracking of Inconel Alloy 600 in High Temperature Water???An Update, CORROSION, vol.40, issue.8, pp.425-430, 1984.
DOI : 10.5006/1.3593950

D. [. Bandy and . Van-rooyen, Mechanisms of stress corrosion cracking and intergranular attack in alloy 600 in high temperature caustic and pure water, Journal of Materials for Energy Systems, vol.55, issue.3, pp.237-245, 1985.
DOI : 10.1007/978-1-4615-8258-8_3

C. [. Benhamou and . Amzallag, Use of Monte-Carlo methodology to predict stress corrosion initiation time of alloy 600 PWR component " , in: Workshop on detection, avoidance, mechanisms, modelling and prediction of SCC initiation in water-cooled nuclear reactor plants, 2008.

. [. Boudot, Méthode d'évaluation de la sensibilité à la corrosion sous contrainte en milieu primaire REP de pièces métalliques de nickel, 1992.

. [. Boursier-[-boursier95-]-j, D. Boursier, F. Desjardins, and . Vaillant, The influence of the strain-rate on the stress corrosion cracking of alloy 600 in high temperature primary water, Thèse, pp.493-508, 1993.
DOI : 10.1016/0010-938X(94)00158-3

L. [. Bruemmer, C. H. Charlot, and . Henagger, Microstructure and Microdeformation Effects on IGSCC of Alloy 600 Steam Generator Tubing, CORROSION, vol.44, issue.11, pp.782-788, 1988.
DOI : 10.5006/1.3584948

G. [. Bruemmer and . Was, Microstructural and microchemical mechanisms controlling intergranular stress corrosion cracking in light-water-reactor systems, Journal of Nuclear Materials, vol.216, pp.348-363, 1994.
DOI : 10.1016/0022-3115(94)90020-5

P. [. Buisine, J. P. Lebec, and . Massoud, Caractérisation métallurgique et résistance à la corrosion sous contrainte en milieu primaire de matériaux d'adaptateurs et de traversées de fond de cuve en alliage 600, 1994.

D. Caron, Influence de l'hydrogène sur la vitesse de propagation des fissures de corrosion sous contrainte dans l'alliage 600 en milieu primaire des réacteurs nucléaires à eau sous pression, Thèse, Institut National des Sciences Appliquées de Lyon, 2000.

. [. Carrette, Relâchement des produits de corrosion des tubes en alliage 690 de générateur de vapeur du circuit primaire des réacteurs à eau pressurisée, Thèse, Institut National Polytechnique de Toulouse, 2002.

A. [. Cassagne and . Gelpi, Crack growth rate measurements on Alloy 600 steam generator tubing in steam and primary water, Fifth International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors, American nuclear society, pp.518-524, 1991.

P. [. Cassagne, M. A. Combrade, A. Foucault, . Gelpi-[-cassagne93-]-t, A. Cassagne et al., The influence of mechanical and environmental parameters on the crack growth behavior of alloy 600 in PWR primary water th Scandinavian Corrosion Congress & Eurocorr '92, Espoo (Finlande),1992 Crack growth rate measurements on Alloy 600 steam generator tubing in primary and hydrogenated AVT water, Sixth International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors, pp.12-679, 1993.

T. [. Cassagne, B. Fleury, F. Vaillant, O. De-bouvier, and . Combrade, An update on the influence of hydrogen on the PWSCC of nickel base alloys in high temperature water, Eight International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, pp.307-315, 1997.

. [. Couvant, Vitesse de propagation par corrosion sous contrainte dans l'alliage 600 laminé exposé au milieu primaire des REP, 2008.

F. [. Couvant, O. Vaillant, D. De-bouvier, and . Deforge, Effect of a high Li chemistry on Alloy 600 PWSCC susceptibility, Fourteenth International Conference on Environmental Degradation of Materials in Nuclear Power Systems ? Water Reactors, pp.295-305, 2009.

S. [. Couvant, F. Miloudi, D. Vaillant, Y. Deforge, and . Thebault, PWSCC of steam generator divider plates in alloy 600: coupling field characterizations with R&D studies, International symposium FONTEVRAUD 7, 2010.

T. [. Couvant, C. Kazuya, and . Cossange, Susceptibility to IGSCC of alloy 600 rolled basrs for BMIs-interim progress report, Note EDF, 2010.

T. [. Couvant, G. Proix, P. Ilevbare, and . Roy, Effect of crystal plasticity on IGSCC susceptibility of Ni-base alloys and austenitic stainless steels, Quantitative Micro-Nano (QMN) approach to predicting SCC of Fe-Cr-Ni Alloys, 2010.

L. [. Couvant, T. Legras, P. Ghys, N. Gambier, G. Huin et al., Strain path effect on IGSCC initiation and oxidation of alloy 182 exposed to PWR primary water, Fifteenth International Conference on Environmental Degradation, 2011.

L. [. Couvant, T. Legras, and . Ghys, Interaction between strain localization and SCC in austenitic alloys exposed to PWR primary environment ? Final report, 2012.

A. [. Couvant, . Bescond-[-couvant14-]-t, M. Couvant, J. Wehbi, and . Caballero, Effect of a pollution of the primary loop by anionic resins, on the SCC susceptibility of alloy 600 and AISI 304L Hydrogen effect on SCC kinetics, Workshop on the effect of hydrogen on SCC, Material Ageing Institute, 2008.

M. [. Couvant, C. Wehbi, J. Duhamel, R. Crepin, and . Munier, Development of a 'local' model to predict IGSCC: preliminary calibration of parameters for nickel alloys exposed to primary water, Seventeenth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water ReactorsCOUVANT15A] T. COUVANT, Note EDF en cours, p.20, 2015.

G. [. Crawford and . Was, The Role of grain boundary misorientation in intergranular cracking of Ni-16Cr-9Fe in 360 ??C argon and high-Purity water, Metallurgical Transactions A, vol.27, issue.4, pp.23-1195, 1992.
DOI : 10.1051/rphysap:01989002404041900

[. Cunat, Aciers inoxydables. Propriétés. Résistance à la corrosion, 2000.

. De-curieres08-]-i, M. De-curieres, and . Meunier, Prediction of PWR initiation in steam generator alloy 600 tubes by the Index Model : comparison between model and experience " , in : Workshop on detection, avoidance, mechanisms, modelling and prediction of SCC initiation in watercooled nuclear reactor plants, 2008.

E. Vaillant and . Lemaire, Learnings from EDF investigations on SG divider plates and vessel head nozzles. Evidence of prior deformation effect on stress corrosion cracking, International symposium Fontevraud 7, p.14, 2010.

. [. Delabrouille, Caractérisation par MET de fissures de corrosion sous contrainte d'alliages à base de nickel : influence de la teneur en chrome et de la chimie du milieu, Thèse, Institut National Polytechnique de Toulouse, 2004.

. [. Deleume, Facteurs métallurgiques et mécaniques contrôlant l'amorçage de défauts de corrosion sous contrainte dans l'alliage 718 en milieu primaire des réacteurs à eau sous pression, Thèse, Institute National Polytechnique de Toulouse, 2007.

R. [. Desjardins and . Oltra, Introduction à la corrosion sous contrainte : Phénoménologie et Mécanismes, Corrosion sous contrainte : phénoménologie et mécanismes, Les éditions de physique, 1990.
DOI : 10.1051/mattech/198573120689

E. [. Dohr, D. E. Tarleton, T. Armstrong, S. Couvant, and . Lozano-perez, Recent insights in the deformation and fracture of oxidized grain boundaries in austenitic alloys: a synergistic experimental and finite element study, Seventeenth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, pp.9-13, 2015.

D. [. Dozaki, N. Akutagawa, H. Nagata, K. Takiguchi, and . Norring, Effects of dissolved hydrogen content in PWR primary water on PWSCC initiation property, E-Journal of Advance Maintenance, vol.2, pp.65-76, 2010.

D. [. Dugdale, E. Armstrong, S. G. Tarleton, S. Roberts, and . Lozano-perez, How oxidized grain boundaries fail, Acta Materialia, vol.61, issue.13, pp.4707-4713, 2013.
DOI : 10.1016/j.actamat.2013.05.012

R. [. Economy, J. A. Jacko, F. W. Begley, and . Pement, Influence of hydrogen partial pressure on the IGSCC behavior of alloy 600 tubing in 360°C water or 400°C steam, 1987.

F. Foct, Mécanismes de corrosion sous contrainte de l'alliage 600 polycristallin et monocristallin en milieu primaire : rôle de l'hydrogène, Thèse, Institut National Polytechnique de Grenoble, 1999.

J. Foster, W. Bamford, and R. Pathania, Initial results of Alloy 600 crack growth rate testing in a PWR environment, Seventh International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors, 1995.

O. [. Fournier, P. Calonne, P. Combrade, P. Scott, R. Chou et al., Grain boundary oxidation and embrittlement prior to crack initiation in alloy 600 in PWR primary water, Fifteen International Symposium on Environmental Degradation of Materials in Nuclear Power Systems?Water Reactors, pp.25-39, 2011.

K. Fuji, T. Miura, H. Nishioka, and K. Fukuya, Degradation of grain boundary strength by oxidation in alloy 600, Fifth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, 2011.

. [. Gardey, Etude de la corrosion généralisée des alliages 600, 690 et 800 en milieu primaire. Contribution à la compréhension des mécanismes, Thèse, 1998.

[. Garriga-majo, Etude métallurgique de la corrosion sous contrainte en milieu aqueux de l'alliage 600 (NC15Fe), Thèse, 1983.

P. [. Gendron, S. M. Scott, L. E. Bruemmer, and . Thomas, Internal oxidation as a mechanism for steam generator tube degradation, Third International Steam Generator and Heat Exchanger Conference, pp.389-403, 1998.

J. [. Gomes-briceno, F. Lapena, and . Blasquez, Crack growth rates in vessel head penetration materials, International Symposium on the Contribution of Materials Investigation to the Resolution of Problems Encountered in Pressurized Water Reactors, pp.12-16, 1994.

J. M. Gras, J. C. Van-duysen, D. Noel, and D. Crouzet, La corrosion sous contrainte de l'alliage 600 dans l'eau, 1684.

M. M. Hall and D. M. Symons, Hydrogen assisted fracture model for low potential stress corrosion cracking of Ni-Cr-Fe Alloys " , in: Chemistry and Electrochemistry of Stress Corrosion Cracking, Ed. R. H. Jones, TMS, pp.447-466, 2001.

T. [. Herbelin, L. Couvant, D. Legras, and . Delafosse, Oxidation of austenitic stainless stainless steels in PWR primary water, p.17, 2009.
URL : https://hal.archives-ouvertes.fr/emse-01063711

A. [. Hoang, S. C. Gangadharan, and . Ramalingam, Primary water stress corrosion cracking inspection ranking scheme for alloy 600 components, Nuclear Engineering and Design, vol.181, issue.1-3, pp.209-219, 1998.
DOI : 10.1016/S0029-5493(97)00346-4

. [. Huguenin, Amorçage des fissures de corrosion sous contrainte dans les aciers inoxydables austénitiques pré-déformés et exposés au milieu primaire des réacteurs à eau sous pression, Thèse, Ecole Nationale Supérieure des Mines de Paris, 2012.

C. Hurley, Kinetic study of hydrogen-material interactions in nickel base alloy 600 and stainless steel 316L through coupled experimental and numerical analysis, Thèse, 2015.

S. Sik, Y. Hwang, S. Soo-limm, D. J. Woo-kim, H. Kim et al., Role of grain boundary carbides in cracking behavior of Ni Base alloys, Nuclear Materials Research Division, pp.73-80, 2013.

G. [. Jacko, F. Economy, and . Pement, The influence of dissolved hydrogen on primary water stress corrosion cracking of alloy 600 at PWR steam generator operating temperatures, Proceedings of the fifth international symposium on environmental degradation of materials in nuclear power systems -water reactors, pp.613-620, 1991.

. [. Jambon, Mécanismes d'absorption d'hydrogène et interactions hydrogène ? défauts : Implications en corrosion sous contrainte des alliages à base nickel en milieu primaire des réacteurs à eau pressurisée, Thèse, 2012.

. [. Kuntoff, Loi de comportement de l'Alliage 600, Présentation du projet CORIOLIS, 2014.

. [. Laghoutaris, Corrosion sous contrainte de l'alliage 600 en milieu primaire des réacteurs à eau sous pression : apport à la compréhension des mécanismes, Thèse, 2009.

. [. Lehong, Evaluation des contraintes résiduelles de fabrication sur des maquettes de traverses de fond de cuve, 1996.

[. Hong, Modélisation de l'amorçage de la fissuration sous contrainte de l'alliage 600 en milieu primaire REP

. [. Lehong, Caractérisation métallurgique et résistance à la corrosion sous contrainte des alliages 182 et 82 en milieu primaire des REP ? Synthèse des connaissances en, Note EDF, 1998.

. [. Leonard, Study of stress corrosion cracking of alloy 600 in high temperature high pressure water, 2010.

. [. Lindsay, Stress corrosion cracking and internal oxidation of Alloy 600 in high temperature hydrogenated steam water, 2014.

H. Liu, M. Gao, D. Harlow, and R. Wei, Grain boundary character, and carbide size and spatial distribution in a ternary nickel alloy, Scripta Metallurgica et Materialia, vol.32, issue.11, pp.1807-1812, 1995.
DOI : 10.1016/0956-716X(95)00015-N

N. Lorho, Stress corrosion cracking susceptibility in Alloy 600 with different strain histories, 2014.

J. [. Loucif, Y. Petit, and . Wouters, Semiconducting behavior and bandgap energies of oxide films grown on alloy 600 under PWR simulated primary water conditions with different dissolved hydrogen contents, Journal of Nuclear Materials, vol.443, issue.1-3, pp.222-229, 2013.
DOI : 10.1016/j.jnucmat.2013.07.044
URL : https://hal.archives-ouvertes.fr/hal-00933805

K. [. Lozano-perez, I. Kruska, T. Iyengar, T. Terachi, and . Yamada, The role of cold work and applied stress on surface oxidation of 304 stainless steel, Corrosion Science, vol.56, pp.2012-78
DOI : 10.1016/j.corsci.2011.11.021

. [. Macdonald, The history of the Point Defect Model for the passive state: A brief review of film growth aspects, Electrochimica Acta, vol.56, issue.4, pp.1761-1772, 2011.
DOI : 10.1016/j.electacta.2010.11.005

. [. Macdonald, The key to our metals-based civilization, Pure Applied Chemistry, vol.71, pp.951-978, 1999.
DOI : 10.1351/pac199971060951

F. , P. Combrade, P. Scott, and P. Marcus, XPS and STM study of the growth and structure of passive films in high temperature water on a nickel-base alloy, Electrochimica Acta, vol.49, pp.3957-3964, 2004.

A. [. Magnin, B. Chambreuil, and . Bayle, The corrosion-enhanced plasticity model for stress corrosion cracking in ductile fcc alloys, Acta Materialia, vol.44, issue.4, pp.1457-1470, 1996.
DOI : 10.1016/1359-6454(95)00301-0

. [. Marchetti-sillans, Corrosion généralisée des alliages à base nickel en milieu aqueux à haute température : apport à la compréhension des mécanismes, Thèse, Ecole Nationale Supérieure des Mines Saint-Etienne, 2007.

]. N. Mcintyre79, D. G. Mcintyre, D. Zetaruk, and . Owen, X-Ray Photoelectron Studies of the Aqueous Oxidation of Inconel-600 Alloy, Journal of The Electrochemical Society, vol.126, issue.5, pp.750-760, 1979.
DOI : 10.1149/1.2129132

. [. Mithieux, Influence de la teneur en chrome et de la structure des alliages de nickel sur leur comportement en corrosion sous contrainte en milieu primaire des REP, Thèse, Institut National Polytechnique de Grenoble, 1997.

. [. Molander, Comparison of PWSCC initiation crack growth data for alloy 600, Water Chemistry of Nuclear Reactor System, 2008.

S. [. Morton, G. A. Attanasio, and . Young, Primary water SCC understanding and characterization through fundamental testing in the vicinity of the Nickel/Nickel Oxide phase transition, Tenth International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors, Nevada, 2001.

P. Moulin, A. M. Huntz, and P. Lacombe, Influence du carbone sur la diffusion du chrome et du nickel en volume et dans les joints de grains de l'alliage Ni-Cr 80/20, Acta Metallurgica, vol.27, issue.9, pp.1431-1443, 1979.
DOI : 10.1016/0001-6160(79)90165-2

N. [. Nakagawa, T. Totsuka, N. Terachi, and . Nakajima, Influence of Dissolved Hydrogen on Oxide Film and PWSCC of Alloy 600 in PWR Primary Water, Journal of Nuclear Science and Technology, vol.29, issue.4, pp.39-43, 2003.
DOI : 10.5006/0010-9312-29.4.123

J. [. Norring, P. Engstrom, and . Norberg, Intergranular stress corrosion cracking in steam testing of Alloy 690 and Alloy 600 tubes, Thirst International Symposium on Environmental Degradation of Materials in Nuclear Power Systems?Water Reactors, 1998.

B. [. Norring, J. Rosborg, J. Engstrom, and . Svenson, Influence of LiOH and H2 on primary side IGSCC of alloy 600 steam generator tubes, International Symposium of Fontevraud II, 1990.

J. Panter, Etude de la corrosion sous contrainte des alliages 690 et 600 en milieu primaire de REP. Influence des procédés de fabrication des tubes de générateur de vapeur sur la phase d'amorçage, Thèse, Institut National Polytechnique de Toulouse, 2002.

B. [. Panter, J. Viguier, M. Cloue, P. Foucault, E. Combrade et al., Influence of oxide films on primary water stress corrosion cracking initiation of alloy 600, Journal of Nuclear Materials, vol.348, issue.1-2, pp.213-221, 2006.
DOI : 10.1016/j.jnucmat.2005.10.002
URL : https://hal.archives-ouvertes.fr/hal-00477641

M. [. Pay, . C. Mcintyre-[-potter61-]-e, G. M. Potter, . Mann-[-poulain15-]-t, C. Couvant et al., Influence of grain boundary microstructure on susceptibility pf Alloy 600 to intergranular attack and stress corrosion cracking Oxidation of mild steel in high-temperature aqueous systems Effet d'une contrainte sur l'oxydation : mise au point d'un dispositif d'oxydation sous contrainte et d'une méthodologie Geometrical speciality and special properties of grain boundaries, 1st International Congress of Metallic CorrosionPRIESTER89] L. PRIESTER Revue Physique Appliquée, pp.314-319, 1961.

[. Proix, C. Radetzky, C. Benhamou-note, F. R. Rebak, A. Mcilree et al., Comportements non linéaires. U4.51 Caractérisation métallurgique de traversées en alliage 600 Effects of ph and stress intensity on crack growth rate in Alloy 600 in lithiated + borated water at high temperatures American nuclear society, Fifth International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors, pp.511-517, 1991.

. [. Rios, H. Sahlaoui, J. Sidhom, and . Philibert, Etude des mécanismes de corrosion sous contrainte de l'alliage 600(NC15Fe) dans l'eau à haute température Prediction of chromium depleted-zone evolution during aging of Ni-Cr-Fe alloys, Thèse, pp.1383-1392, 1993.

. [. Scenini-[-scott01-]-p, C. Scott, and . Benhamou, The effect of surface preparation on the oxidation and SCC behavior of alloy 600 and 690 in hydrogenated steam [SCOTT11, COMBRADE11, FORD11] Environmentally ? assisted degradation of nickel-base alloys in LWRs Advanced Nuclear Technology International An overview of recent observations and interpretations of IGSCC in nickel base alloys in PWR primary water An overview of materials degradation by stress corrosion in PWRs An overview of materials degradation by stress corrosion in PWRs, Tenth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, Lake Tahoe- Nevada Corrossion Issues in Light Water Reactors: Stress Corrosion Cracking, ed. D. Féron, J.M. Olive, Woodhead pub, pp.12-16, 2004.

. [. Scott, An analysis of primary water stress corrosion cracking in PWR steam generator, Proceedings NEA/CSNI-UNIPEDE specialist meeting on operating experience with steam generators, pp.16-20, 1991.

M. [. Scott and . Calvar, Some possible mechanisms of intergranular stress corrosion cracking of alloy 600 in PWR primary water, Sixth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, pp.1-5

. [. Scott, Stress corrosion crack growth of nickel alloys in PWR primary coolant, 1996.

. [. Scott, An Overview of Internal Oxidation as a Possible Explanation of Intergranular Stress Corrosion Cracking of Alloy 600 in PWRS, Ninth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, pp.3-12, 1999.
DOI : 10.1115/1.3443507

L. [. Sennour, S. Marchetti, R. Perrin, M. Molins, O. Pijolat et al., Characterization of the Oxide Films Formed at the Surface of Ni-Base Alloys in Pressurized Water Reactors Primary Coolant by Transmission Electron Microscopy, Materials Science Forum, vol.595, issue.598, pp.595-598, 2008.
DOI : 10.4028/www.scientific.net/MSF.595-598.539
URL : https://hal.archives-ouvertes.fr/emse-00590705

P. [. Seyeux, . Marcus-]-c, P. Soustelle, M. Combrade, . C. Foucault et al., Etude bibliographique des données expérimentales de cinétique de croissance des couches d'oxyde sur les alliages inoxydables inconels 600 et 690 dans l'eau à haute température et test des principaux modèles de croissance [SMC-027] Special Metals Corporation A parametric study of PWSCC of Alloy 600 i primary water PWSCC of alloy 600: a parametric study of surface film effects, Rapport ENSCP(LPCS)- EDF(MMC) Ninth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems?Water Reactors, 1998.

Z. [. Staehle and . Fang, Comments on a Proposed Mechanism of Internal Oxidation for Alloy 600 as Applied to Low Potential SCC, Ninth International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors, ed. S. Bruemmer, P. Ford, G. Was, pp.69-78, 1999.
DOI : 10.1016/0167-2738(84)90166-8

D. [. Stratulat, S. G. Armstrong, and . Roberts, Micro-mechanical measurement of fracture behaviour of individual grain boundaries in Ni alloy 600 exposed to a pressurized water reactor environment, Corrosion Science, vol.104, pp.2016-2025
DOI : 10.1016/j.corsci.2015.10.019

G. Sui, J. M. Titchmarsh, G. B. Heys, and J. Congleton, Stress corrosion cracking of alloy 600 and alloy 690 in hydrogen/steam at 380 ??C, Corrosion Science, vol.39, issue.3, pp.565-587, 1997.
DOI : 10.1016/S0010-938X(97)86103-3

L. Tan, K. Sridharan, and T. R. Allen, The effect of grain boundary engineering on the oxidation behavior of INCOLOY alloy 800H in supercritical water, Journal of Nuclear Materials, vol.348, issue.3, pp.263-271, 2006.
DOI : 10.1016/j.jnucmat.2005.09.023

B. Tang, L. Jiang, R. Hu, and Q. Li, Correlation between grain boundary misorientation and M23C6 precipitation behaviors in a wrought Ni-based superalloy, Materials Characterization, vol.78, pp.144-150, 2013.
DOI : 10.1016/j.matchar.2013.02.006

H. and M. Oshitani, Influence of dissolved hydrogen on structure of oxide film on alloy 600 formed in primary water of pressurized water reactor, Journal of Nuclear Science and Technology, vol.40, pp.509-516, 2003.

G. J. Theus and R. H. Emanuelson, Stress corrosion cracking of alloy 600 and alloy 690 in all volatile treated water at elevated temperatures, p.67, 1983.

B. [. Thomas, J. S. Johnson, S. M. Vetrano, and . Bruemmer, Microstructural and microchemical characterization of primary-side cracks in an alloy 600 nozzle head penetration and its alloy 182 j-weld from the David?Besse reactor vessel, Twelfth International Conference on Environmental Degradation of Materials in Nuclear Power Systems ? Water Reactors, pp.567-578, 2005.

E. [. Totsuka, G. Lunarska, Z. Cragnolino, and . Szklarska-smialowska, Effect of Hydrogen on the Intergranular Stress Corrosion Cracking of Alloy 600 in High Temperature Aqueous Environments, CORROSION, vol.43, issue.8, pp.505-514, 1987.
DOI : 10.5006/1.3583894

L. [. Trillo and . Murr, A TEM investigation of M23C6 carbide precipitation behaviour on varying grain boundary misorientations in 304 stainless steels, Journal of Materials Science, vol.33, issue.5, pp.1263-1271, 1998.
DOI : 10.1023/A:1004390029071

. [. Vaillant, Projet CAPCOV ? Fiche du mécanisme corrosion sous contrainte en milieu primaire des alliages de nickel type 600, Note EDF HT-29, 2004.

. [. Vaillant, Revue technique du programme scientifique Zones en Inconel, Note EDF, 2008.

T. [. Vaillant and . Couvant, Vitesses de propagation par corrosion sous contrainte en milieu primaire sur matériaux représentatifs de divers composants en alliage 600 et sur soudures en alliage 182, Note EDF, 2012.

S. [. Vaillant, . Le, and . Hong, Evaluation des vitesses de propagation en milieu primaire de matériaux de traversées de cuve en alliage 600 et de métaux déposes en alliage 182, 1997.

. [. Vancon, Caractérisation métallurgique et résistance à la corrosion sous contrainte en milieu primaire de matériaux d'adaptateurs et de traversées de fond de cuve, Note EDF, 1995.

G. S. Was, Micromechanical and microstructural effects on SCC of nickel base alloys, Parkins symposium on fundamental aspects of stress corrosion cracking, 1991.

K. [. Was and . Lian, Role of carbides in stress corrosion cracking resistance of alloy 600 and controlled-purity Ni-&-Cr-9Fe Alloys in primary water at 360°C, Corrosion, pp.675-688, 1998.

M. Wehbi, Modélisation de l'amorçage de la Corrosion sous Contrainte dans les alliages base nickel 182 et 82 en milieu primaire des Réacteurs à Eau sous Pression, Thèse, Ecole Nationale Supérieure des Mines de Paris, 2014.

Y. [. Yamaura, S. Iagarashi, T. Tsurekawa, and . Watanabe, Structure-dependent intergranular oxidation in Ni???Fe polycrystalline alloy, Acta Materialia, vol.47, issue.4, pp.1163-1174, 1999.
DOI : 10.1016/S1359-6454(99)00007-5

K. [. Yonezawa and . Onimura, Effect of metallurgical factors on Stress Corrosion Cracking of Ni-base alloys in high temperature water, International Conference on Water Chemistry in Nuclear Power Plants, pp.490-495, 1988.

W. [. Young, D. S. Wilkening, E. Morton, N. Richey, and . Lewis, The mechanism and modelling of intergranular stress corrosion cracking of nickel-chromium-iron alloys exposed to high purity water, Twelfth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, pp.913-922, 2005.