I. Babuska and B. Szabo, On the rates of convergence of the finite element method, International Journal for Numerical Methods in Engineering, vol.37, issue.3, pp.323-341, 1982.
DOI : 10.1016/B978-0-12-068650-6.50006-X

M. L. Booy and F. Y. Et-kafka, Isothermal flow of viscous liquids in the mixing section of a Buss kneader, SPE ANTEC Tech. papers, pp.140-145, 1987.

M. Brito-bazan, L. Fradette, and P. A. Et-tanguy, Experimental Flow Visualization and Residence Time Distributions in a Co-Kneader, International Polymer Processing, vol.27, issue.4, pp.414-426, 2012.
DOI : 10.3139/217.2470

M. M. Brito-bazan, Mixing Studies in a Co-Kneader, Thèse de doctorat, 2011.

A. N. Brooks and T. J. Et-hughes, Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations, Computer Methods in Applied Mechanics and Engineering, vol.32, issue.1-3, pp.1-3199, 1982.
DOI : 10.1016/0045-7825(82)90071-8

R. Brzoskowski, T. Kumazawa, and J. L. Et-white, A Model of Flow in the Mixing Section of the List KoKneader, International Polymer Processing, vol.6, issue.2, pp.136-142, 1991.
DOI : 10.3139/217.910136

R. Brzoskowski and J. L. Et-white, Further Considerations of Simulation of Flow in Pin Barrel Extruders and in Screw Extruders with Sliced Flights, International Polymer Processing, vol.5, issue.4, pp.238-243, 1990.
DOI : 10.3139/217.900238

R. Brzoskowski, J. L. White, W. Szydlowski, N. Nakajima, and K. Et-min, Modelling Flow in Pin-Barrel Screw Extruders, International Polymer Processing, vol.3, issue.3, pp.134-140, 1988.
DOI : 10.3139/217.880134

D. L. Chopp, Computing Minimal Surfaces via Level Set Curvature Flow, Journal of Computational Physics, vol.106, issue.1, pp.77-91, 1993.
DOI : 10.1006/jcph.1993.1092

R. Codina, U. Schäfer, and E. Et-oñate, Mould filling simulation using finite elements, International Journal of Numerical Methods for Heat & Fluid Flow, vol.1, issue.4, pp.291-310, 1994.
DOI : 10.1002/nme.1620250115

E. Kosseifi and N. , Numerical simulation of boiling for industrial quenching processes, 2012.
URL : https://hal.archives-ouvertes.fr/pastel-00734601

P. Elemans, Modelling of the Processing of Incompatible Polymer Blends, Thèse de doctorat, 1989.

P. H. Elemans, Continuous Equipment Simulation ??? Co-Kneader, Manas- Zloczower, I., éditeur : Mixing and Compounding of Polymers, pp.419-450, 2009.
DOI : 10.3139/9783446433717.013

P. H. Elemans and H. E. Et-meijer, On the modeling of continuous mixers. Part II: The cokneader, Polymer Engineering and Science, vol.10, issue.15, pp.30893-904, 1990.
DOI : 10.3139/217.880134

A. Ern and J. L. Et-guermond, Éléments finis : théorie, applications, mise en oeuvre, Mathématiques et Applications, 2002.

C. Froeschlé, The Lyapunov characteristic exponents and applications, Journal de Mécanique Théorique et Appliquée, Numéro, vol.spé, pp.101-132, 1984.

C. Geuzaine and J. Et-remacle, Gmsh: A 3-D finite element mesh generator with built-in pre- and post-processing facilities, International Journal for Numerical Methods in Engineering, vol.69, issue.4, pp.791309-1331, 2009.
DOI : 10.1007/978-3-642-59223-2

L. Heinz, Continuously operating kneader and mixer, 1950.

C. W. Hirt and B. D. Nichols, Volume of fluid (VOF) method for the dynamics of free boundaries, Journal of Computational Physics, vol.39, issue.1, pp.201-225, 1981.
DOI : 10.1016/0021-9991(81)90145-5

T. J. Hughes and M. Mallet, A new finite element formulation for computational fluid dynamics: III. The generalized streamline operator for multidimensional advective-diffusive systems, Computer Methods in Applied Mechanics and Engineering, vol.58, issue.3, pp.305-328, 1986.
DOI : 10.1016/0045-7825(86)90152-0

P. G. Lafleur and B. Et-vergnes, Extrusion des polymères, Hermès : Lavoisier, 2014.

P. Lesaint and P. Et-raviart, On a Finite Element Method for Solving the Neutron Transport Equation, 1974.
DOI : 10.1016/B978-0-12-208350-1.50008-X

M. Lyu and J. L. Et-white, Models of Flow and Experimental Studies on a Modular List/Buss Kokneter, International Polymer Processing, vol.10, issue.4, pp.305-313, 1995.
DOI : 10.3139/217.950305

M. Lyu and J. L. Et-white, Modelling of a Viscous Non-Newtonian Polymer Melt in a List/Buss Kneader and Comparison to Experiment, International Polymer Processing, vol.11, issue.3, pp.208-221, 1996.
DOI : 10.3139/217.960208

M. Lyu and J. L. Et-white, Non-Isothermal Non-Newtonian Analysis of Flow in a Modular List/Buss Kneader, Journal of Reinforced Plastics and Composites, vol.7, issue.4, pp.16-1445, 1997.
DOI : 10.1002/adv.1987.060070407

M. Lyu and J. L. Et-white, Simulation of linear viscoelastic flow behavior in the Buss Kneader, Polymer Engineering & Science, vol.28, issue.3, pp.623-635, 1997.
DOI : 10.3139/217.950305

M. Lyu and J. L. Et-white, Simulation of Non-Isothermal Flow in a Modular Buss Kneader and Comparison with Experiment, International Polymer Processing, vol.12, issue.2, pp.104-109, 1997.
DOI : 10.3139/217.970104

M. Lyu and J. L. Et-white, Simulation of Non-Linear Viscoelastic Flow Behavior in the Buss Kneader, Journal of Reinforced Plastics and Composites, vol.28, issue.10, pp.756-791, 2000.
DOI : 10.1002/pen.760280504

I. Manas-zloczower, Studies of Mixing Efficiency in Batch and Continuous Mixers, Rubber Chemistry and Technology, vol.67, issue.3, pp.504-528, 1994.
DOI : 10.5254/1.3538687

I. Manas-zloczower, Analysis of mixing efficiency in polymer processing equipment, Macromolecular Symposia, vol.333, issue.3, pp.5-8, 1997.
DOI : 10.1038/333419a0

J. M. Mckelvey, Polymer Processing, 1962.

M. Mehranpour, H. Nazokdast, and B. Et-dabir, Computational Study of the Velocity Field in the Conveying Element of a Ko-kneader with CFD Method, International Polymer Processing, vol.17, issue.2, pp.108-114, 2002.
DOI : 10.3139/217.1680

M. Mehranpour, H. Nazokdast, and B. Et-dabir, Estimation of Residence Time Distribution in two Elements of a Ko-Kneader, International Polymer Processing, vol.17, issue.1, pp.22-25, 2002.
DOI : 10.3139/217.1677

M. Mehranpour, H. Nazokdast, and B. Et-dabir, Computational Study of Velocity Field in the KE Element of a Modular Ko-Kneader with CFD Method, International Polymer Processing, vol.18, issue.4, pp.330-337, 2003.
DOI : 10.3139/217.1751

M. Mehranpour, H. Nazokdast, and B. Et-dabir, Prediction of Residence Time Distribution in EZ and KE Element of a Ko-Kneader by using CFD Method, International Polymer Processing, vol.18, issue.4, pp.327-329, 2003.
DOI : 10.3139/217.1757

M. Mehranpour, H. Nazokdast, and B. Et-dabir, Prediction of Residence Time Distribution for Different Screw Configurations of a Ko-Kneader by using a Cluster Model, International Polymer Processing, vol.19, issue.1, pp.13-15, 2004.
DOI : 10.3139/217.1758

H. E. Meijer and P. H. Et-elemans, The modeling of continuous mixers. Part I: The corotating twin-screw extruder, Polymer Engineering and Science, vol.1, issue.82, pp.275-290, 1988.
DOI : 10.1007/978-94-009-6634-5

H. E. Meijer, J. M. Janssen, and P. D. Et-anderson, Mixing of Immiscible Liquids, Manas-Zloczower, I., éditeur : Mixing and Compounding of Polymers, pp.41-182, 2009.
DOI : 10.3139/9783446433717.003

B. Monchatre, Contribution à l'étude expérimentale d'un outil de mélange de type co-malaxeur : application aux polymères, Thèse de doctorat, 2015.

W. Mulder, S. Osher, and J. A. Et-sethian, Computing interface motion in compressible gas dynamics, Journal of Computational Physics, vol.100, issue.2, pp.209-228, 1992.
DOI : 10.1016/0021-9991(92)90229-R
URL : http://www.ann.jussieu.fr/~frey/papers/levelsets/Mulder W., Osher S., Sethian J., Computing interface motion in compressible gas dynamics.pdf

S. Osher and J. A. Et-sethian, Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations, Journal of Computational Physics, vol.79, issue.1, pp.12-49, 1988.
DOI : 10.1016/0021-9991(88)90002-2
URL : http://www.ann.jussieu.fr/~frey/papers/levelsets/Osher S., Fronts propagating with curvature dependent speed.pdf

M. Sussman, P. Smereka, and S. Et-osher, A Level Set Approach for Computing Solutions to Incompressible Two-Phase Flow, Journal of Computational Physics, vol.114, issue.1, pp.146-159, 1994.
DOI : 10.1006/jcph.1994.1155

Z. Tadmor and C. G. Et-gogos, Principles of Polymer Processing, 2006.

T. E. Tezduyar and Y. J. Et-park, Discontinuity-capturing finite element formulations for nonlinear convection-diffusion-reaction equations, Computer Methods in Applied Mechanics and Engineering, vol.59, issue.3, pp.307-325, 1986.
DOI : 10.1016/0045-7825(86)90003-4

B. Vergnes and S. Et-puissant, Extrusion monovis (partie 1) Techniques de l'ingénieur Plasturgie : procédés d'extrusion, (ref. article : am3650), 2002.

Y. Yabushita, R. Brzoskowski, J. L. White, and N. Et-najakima, Flow of Rubber Compound in a Pin Barrel Screw Extruder, International Polymer Processing, vol.4, issue.4, pp.219-224, 1989.
DOI : 10.3139/217.890219

S. T. Zalesak, Fully multidimensional flux-corrected transport algorithms for fluids, Journal of Computational Physics, vol.31, issue.3, pp.335-362, 1979.
DOI : 10.1016/0021-9991(79)90051-2