Q. Yan, H. Toghiani, Y. Lee, K. Liang, and E. H. Causey, « Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components », Spec. Issue Sel, Pap. Present. Int. Workshop Molten Carbonate Fuel Cells Relat. Sci. Technol. Together Regul. Pap, vol.160, issue.2, pp.1242-1250, 2005.

E. Antolini, R. R. Passos, and E. A. Ticianelli, Electrocatalysis of oxygen reduction on a carbon supported platinum???vanadium alloy in polymer electrolyte fuel cells, Electrochimica Acta, vol.48, issue.3, pp.263-270, 2002.
DOI : 10.1016/S0013-4686(02)00644-8

H. R. Colón-mercado and B. N. Popov, Stability of platinum based alloy cathode catalysts in PEM fuel cells, Journal of Power Sources, vol.155, issue.2, pp.253-263, 2006.
DOI : 10.1016/j.jpowsour.2005.05.011

S. Hidai, M. Kobayashi, H. Niwa, Y. Harada, M. Oshima et al., Changes in electronic states of platinum???cobalt alloy catalyst for polymer electrolyte fuel cells by potential cycling, Journal of Power Sources, vol.196, issue.20, pp.20-8340, 2011.
DOI : 10.1016/j.jpowsour.2011.06.054

S. Thanasilp and M. Hunsom, Effect of MEA fabrication techniques on the cell performance of Pt???Pd/C electrocatalyst for oxygen reduction in PEM fuel cell, Fuel, vol.89, issue.12, pp.3847-3852, 2010.
DOI : 10.1016/j.fuel.2010.07.008

D. Seo, J. Lee, S. Park, J. Rhee, S. W. Choi et al., Investigation of MEA degradation in PEM fuel cell by on/off cyclic operation under different humid conditions, International Journal of Hydrogen Energy, vol.36, issue.2, pp.1828-1836, 2011.
DOI : 10.1016/j.ijhydene.2010.02.053

S. Park and B. N. Popov, Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance, Fuel, vol.90, issue.1, pp.436-440, 2011.
DOI : 10.1016/j.fuel.2010.09.003

C. Lim and C. Y. Wang, Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell, Electrochimica Acta, vol.49, issue.24, pp.24-4149, 2004.
DOI : 10.1016/j.electacta.2004.04.009

K. D. Baik and M. S. Kim, « Characterization of nitrogen gas crossover through the membrane in proton-exchange membrane fuel cells », 11th Int, Conf. Hydrog. Mater. Sci. Chem. Carbon Nanomater, vol.36, issue.1, pp.732-739, 2011.

J. B. Siegel, S. V. Bohac, A. G. Stefanopoulou, and E. S. Yesilyurt, Nitrogen Front Evolution in Purged Polymer Electrolyte Membrane Fuel Cell with Dead-Ended Anode, Journal of The Electrochemical Society, vol.157, issue.7
DOI : 10.1149/1.2345591

X. Cheng, J. Zhang, Y. Tang, C. Song, J. Shen et al., Hydrogen crossover in high-temperature PEM fuel cells, Hydrogen crossover in hightemperature PEM fuel cells, pp.25-31, 2007.
DOI : 10.1016/j.jpowsour.2007.02.027

S. A. Vilekar and R. Datta, The effect of hydrogen crossover on open-circuit voltage in polymer electrolyte membrane fuel cells, Journal of Power Sources, vol.195, issue.8, pp.2241-2247, 2010.
DOI : 10.1016/j.jpowsour.2009.10.023

Y. Wang, K. S. Chen, J. Mishler, S. C. Cho, and X. C. , Adroher, « A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research

F. Weng, A. Su, and C. Hsu, The study of the effect of gas stoichiometric flow rate on the channel flooding and performance in a transparent fuel cell, International Journal of Hydrogen Energy, vol.32, issue.6, pp.666-676, 2007.
DOI : 10.1016/j.ijhydene.2006.06.066

J. Zhang, H. Zhang, J. Wu, E. J. Zhang, and . Chapter, -Pressure Effects on PEM Fuel Cell Performance », in Pem Fuel Cell Testing and Diagnosis

J. Park and X. Li, Effect of flow and temperature distribution on the performance of a PEM fuel cell stack, Journal of Power Sources, vol.162, issue.1, pp.444-459, 2006.
DOI : 10.1016/j.jpowsour.2006.07.030

H. Sun, G. Zhang, L. Guo, and E. H. Liu, A novel technique for measuring current distributions in PEM fuel cells, Journal of Power Sources, vol.158, issue.1, pp.326-332, 2006.
DOI : 10.1016/j.jpowsour.2005.09.046

H. Sun, G. Zhang, L. Guo, and E. H. Liu, A Study of dynamic characteristics of PEM fuel cells by measuring local currents, International Journal of Hydrogen Energy, vol.34, issue.13, pp.5529-5536, 2009.
DOI : 10.1016/j.ijhydene.2009.04.066

J. Ahn and S. Choe, Coolant controls of a PEM fuel cell system, Journal of Power Sources, vol.179, issue.1, pp.252-264, 2008.
DOI : 10.1016/j.jpowsour.2007.12.066

J. Ramousse, O. Lottin, and S. Didierjean, Heat sources in proton exchange membrane (PEM) fuel cells, Journal of Power Sources, vol.192, issue.2, pp.435-441, 2009.
DOI : 10.1016/j.jpowsour.2009.03.038

K. Promislow and J. St-pierre, Wetton, « A simple, analytic model of polymer electrolyte membrane fuel cell anode recirculation at operating power including nitrogen crossover, J

C. Bao, M. Ouyang, and E. B. Yi, Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system???I. Control-oriented modeling, International Journal of Hydrogen Energy, vol.31, issue.13, pp.13-1879, 2006.
DOI : 10.1016/j.ijhydene.2006.02.031

M. Badami and M. Mura, « Leakage effects on the performance characteristics of a regenerative blower for the hydrogen recirculation of a PEM fuel cell », Energy Convers, Manag, vol.55, issue.0, pp.20-25, 2012.

J. Ahn and S. Choe, Coolant controls of a PEM fuel cell system, Journal of Power Sources, vol.179, issue.1, pp.252-264, 2008.
DOI : 10.1016/j.jpowsour.2007.12.066

S. Asghari, H. Akhgar, and B. F. Imani, Design of thermal management subsystem for a 5kW polymer electrolyte membrane fuel cell system, Journal of Power Sources, vol.196, issue.6, pp.3141-3148, 2011.
DOI : 10.1016/j.jpowsour.2010.11.077

X. Li and I. Sabir, Review of bipolar plates in PEM fuel cells: Flow-field designs, International Journal of Hydrogen Energy, vol.30, issue.4, pp.359-371, 2005.
DOI : 10.1016/j.ijhydene.2004.09.019

M. Uno, T. Shimada, and E. K. Tanaka, Reactant recirculation system utilizing pressure swing for proton exchange membrane fuel cell, Journal of Power Sources, vol.196, issue.5, pp.2558-2566, 2011.
DOI : 10.1016/j.jpowsour.2010.10.094

«. Clapets-anti-retour:-séries, C. Ca, C. Cp, and C. , MS-01-176;rev_10;fr-FR) -ms-01-176

N. E. Benchouia, H. A. Elias, and L. Khochemane, Mahmah, « Bond graph modeling approach development for fuel cell PEMFC systems, Int. J. Hydrog. Energy, vol.39, pp.27-15224, 2014.
DOI : 10.1016/j.ijhydene.2014.05.034

R. Saisset, G. Fontes, C. Turpin, and E. S. Astier, Bond Graph model of a PEM fuel cell, Sel. Pap. 2nd Fr.-Dtschl. Fuel Cell Conf. 2nd Fr.-Dtschl. Fuel Cell Conf, pp.100-107, 2006.
DOI : 10.1016/j.jpowsour.2005.08.040

P. Vijay, A. K. Samantaray, and E. A. Mukherjee, A bond graph model-based evaluation of a control scheme to improve the dynamic performance of a solid oxide fuel cell, Mechatronics, vol.19, issue.4, pp.489-502, 2006.
DOI : 10.1016/j.mechatronics.2008.11.016

J. B. Siegel, S. V. Bohac, and A. G. Stefanopoulou, Nitrogen Front Evolution in Purged Polymer Electrolyte Membrane Fuel Cell with Dead-Ended Anode, Journal of The Electrochemical Society, vol.157, issue.7, pp.1081-1093, 2010.
DOI : 10.1149/1.2345591

C. Chen, S. Jung, and S. Yen, Flow distribution in the manifold of PEM fuel cell stack, Journal of Power Sources, vol.173, issue.1, pp.249-263, 2007.
DOI : 10.1016/j.jpowsour.2007.05.007

S. Y. Kim and W. N. Kim, Effect of cathode inlet manifold configuration on performance of 10-cell proton-exchange membrane fuel cell, Journal of Power Sources, vol.166, issue.2, pp.430-434, 2007.
DOI : 10.1016/j.jpowsour.2006.12.104

J. Koh, H. Seo, C. G. Lee, Y. Yoo, and H. C. Lim, Pressure and flow distribution in internal gas manifolds of a fuel-cell stack, Journal of Power Sources, vol.115, issue.1, pp.54-65, 2003.
DOI : 10.1016/S0378-7753(02)00615-8