T. Angeliu and G. Was, The Effect of Chromium, Carbon, and Yttrium on the Oxidation of Nickel-Base Alloys in High Temperature Water, Journal of The Electrochemical Society, vol.140, issue.7, pp.1877-1883, 1993.
DOI : 10.1149/1.2220732

T. Angeliu, P. Andresen, and M. Pollick, Repassivation and Crack Propagation of Alloy 600 in 288??C Water, CORROSION, vol.53, issue.2, pp.114-119, 1997.
DOI : 10.5006/1.3280439

R. Balluffi and A. Ruoff, ENHANCED DIFFUSION IN METALS DURING PLASTIC DEFORMATION, Applied Physics Letters, vol.252, issue.4, pp.59-60, 1962.
DOI : 10.1080/14786436108243357

R. Balluffi and A. Ruoff, On Strain???Enhanced Diffusion in Metals. I. Point Defect Models, Journal of Applied Physics, vol.218, issue.6, pp.1634-1647, 1963.
DOI : 10.1063/1.1728808

R. Balluffi and J. Cahn, Mechanism for diffusion induced grain boundary migration, Acta Metallurgica, vol.29, issue.3, pp.493-500, 1981.
DOI : 10.1016/0001-6160(81)90073-0

R. Bandy and D. Van-rooyen, Initiation and propagation of SCC of alloy 600 in high temperature water " International symposium on environmental degradation of materials in nuclear power systems-water reactors, p.763, 1985.

J. Bernadini, Influence des dislocations sur la cinetique de diffusion du fer, du cobalt et du ruthenium dans le cuivre et l'argent monocristallins, Acta Metallurgica, vol.21, issue.12, pp.1561-1569, 1973.
DOI : 10.1016/0001-6160(73)90099-0

G. Bertali, F. Scenini, and M. G. Burke, Advanced microstructural characterization of the intergranular oxidation of Alloy 600, Corrosion Science, vol.100, 2013.
DOI : 10.1016/j.corsci.2015.08.010

G. Bertali, F. Scenini, and M. G. Burke, Advanced microstructural characterization of the intergranular oxidation of Alloy 600, Corrosion Science, vol.100, pp.474-483, 2015.
DOI : 10.1016/j.corsci.2015.08.010

W. Bollmann, Crystal defects and crystalline interfaces, p.254, 1970.
DOI : 10.1007/978-3-642-49173-3

M. J. Boursier, Fissuration par corrosion sous contrainte des alliages Fer-NickelChrome en milieu primaire des réacteurs à eau sous pression, Thèse de doctorat, 1993.

M. J. Boursier, D. Desjardins, and F. Vaillant, The influence of the strain-rate on the stress corrosion cracking of alloy 600 in high temperature primary water, Corrosion Science, vol.37, issue.3, pp.493-508, 1995.
DOI : 10.1016/0010-938X(94)00158-3

G. Brandon, The structure of high-angle grain boundaries, Acta Metallurgica, vol.14, issue.11, p.1476, 1966.
DOI : 10.1016/0001-6160(66)90168-4

D. Broeder, Interface reaction and a special form of grain boundary diffusion in the Cr-W system, Acta Metallurgica, vol.20, issue.3, pp.319-332, 1972.
DOI : 10.1016/0001-6160(72)90024-7

J. Caballero, Modélisation de l'amorçage de l'Alliage 600 en milieu primaire REP, Thèse de Doctorat, PSL* préparée à MINES ParisTech, 2016.

J. Cahn and R. Ballufi, On diffusional mass transport in polycrystals containing stationary or migrating grain boundaries, Scripta Metallurgica, vol.13, issue.6, pp.499-502, 1979.
DOI : 10.1016/0036-9748(79)90077-2

J. Cahn, R. Ballufi, and J. Pan, Diffusion induced grain boundary migration, Scripta Metallurgica, vol.13, issue.6, pp.503-509, 1979.
DOI : 10.1016/0036-9748(79)90078-4

G. Calvarin, R. Molins, and A. M. Huntz, Oxidation Mechanism of Ni?20Cr Foils and Its Relation to the Oxide-Scale Microstructure, Oxidation of Metals, vol.53, issue.1/2, pp.25-48, 2000.
DOI : 10.1023/A:1004578513020

F. Carrette, Relâchement des produits de corrosion des tubes en alliage 690 de générateur de vapeur du circuit primaire des réacteurs à eau pressurisée, Thèse de Institut National, 2002.

F. Carrette, M. C. Lafont, G. Chatainier, L. Guinard, and B. Pieraggi, Analysis and TEM examination of corrosion scales grown on Alloy 690 exposed to pressurized water at 325 ??C, Surface and Interface Analysis, vol.27, issue.1, pp.135-138, 2002.
DOI : 10.1016/0010-938X(87)90068-0

J. Cermak, Self-diffusion of 63Ni along dislocations, Materials Science and Engineering: A, vol.174, issue.1, pp.9-13, 1994.
DOI : 10.1016/0921-5093(94)91107-X

T. Chen, G. Tiwari, Y. Iijima, and K. Yamauchi, Volume and Grain Boundary Diffusion of Chromium in Ni-Base Ni-Cr-Fe Alloys, MATERIALS TRANSACTIONS, vol.44, issue.1, pp.40-46, 2003.
DOI : 10.2320/matertrans.44.40

B. Chetroiu, Corrosion sous contrainte de l'Alliage 600 en milieu primaire des REP : étude de la diffusion du chrome, Thèse de Doctorat, 2015.

M. Cohen, Self-Diffusion during Plastic Deformation, Transactions of the Japan Institute of Metals, vol.11, issue.3, pp.145-151, 1970.
DOI : 10.2320/matertrans1960.11.145

F. Delabrouille, Caractérisation par MET de fissures de corrosion sous contrainte d'alliages à base de nickel : influence de la teneur en chrome et de la chimie du milieu, Thèse de Institut National, 2004.

J. S. Dohie, J. R. Cahoon, and W. F. Caley, The Grain-Boundary Diffusion of Zn in ??-Fe, Journal of Phase Equilibria and Diffusion, vol.12, issue.8, pp.322-327, 2007.
DOI : 10.1002/pssa.2210680138

S. Dubiez-le-goff, Comportement et endommagement d'un superalliage elaboré par compression isostatique à chaud, Thèse de l'École Nationale Supérieure des Mines de Paris, 2003.

G. Economy, R. Jacko, and F. Pement, IGSCC Behavior of Alloy 600 Steam Generator Tubing in Water or Steam Tests Above 360 C, CORROSION, vol.43, issue.12, pp.727-734, 1987.
DOI : 10.5006/1.3583859

J. W. Elmer, T. A. Palmer, and E. D. Specht, x-ray diffraction, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.24, issue.4, pp.978-987, 2006.
DOI : 10.1116/1.2204926

H. Fara and R. Balluffi, Analysis of Diffusion in Media Undergoing Deformation, Journal of Applied Physics, vol.3, issue.2, pp.1133-1134, 1958.
DOI : 10.1016/0001-6160(58)90095-6

F. P. Ford, Quantitative Prediction of Environmentally Assisted Cracking, CORROSION, vol.52, issue.5, pp.375-395, 1996.
DOI : 10.5006/1.3292125

L. Fournier, O. Calonne, P. Combrade, P. Scott, P. Chou et al., Grain boundary oxidation and embrittlement prior to crack initiation in Alloy 600 in PWR primary water, Proc. 15th Int. Conf. on Environmental Degradation of Materials in Nuclear Power Systems-Waters Reactors, The Minerals, Metals & Materials Society [TMS], p.1491, 2011.

F. Garofalo, Deformation et rupture par fluage, 1965.

D. Garriga, Étude métallurgique de la corrosion sous contrainte en milieux aqueux de l'Alliage 600, 1993.

F. Gaslain, H. T. Le, C. Duhamel, C. Guerre, and P. Laghoutaris, The role of intergranular chromium carbides on intergranular oxidation of nickel based alloys in pressurized water reactors primary water, IOP Conf. Series : Materials Science and Engineering 109, 2016.
DOI : 10.1088/1757-899X/109/1/012004
URL : https://hal.archives-ouvertes.fr/hal-01292423

G. Giggins and F. Pettit, Oxidation of Ni-Cr alloys between 800°C and 1200°C, Transactions of Metallurgical Society of AIME, vol.245, pp.2495-2507, 1969.

C. Guerre, O. Raquet, L. Duisabeau, and G. Turluer, Effect of cyclic loadings on the stress corrosion crack growth rate in alloy 600 in PWR primary water, 2004.
DOI : 10.1533/9781845693466.3.231

E. Hart, On the role of dislocations in bulk diffusion, Acta Metallurgica, vol.5, issue.10, p.597, 1957.
DOI : 10.1016/0001-6160(57)90127-X

L. Heldt, The effect of dislocations on diffusion in germanium, Acta Metallurgica, vol.11, issue.10, pp.1165-1168, 1963.
DOI : 10.1016/0001-6160(63)90043-9

M. Hilbert and G. Purdy, Chemically induced grain boundary migration, Acta Metallurgica, vol.26, issue.2, pp.333-340, 1978.
DOI : 10.1016/0001-6160(78)90132-3

T. Hodgkiess, G. C. Wood, D. P. Whittle, and B. D. Bastow, Compositional changes in the underlying alloy produced by the oxidation of Ni-Cr alloys, Oxidation of Metals, vol.12, issue.3, pp.439-449, 1978.
DOI : 10.1007/BF00612089

P. Huguenin, Amorcage des fissures de corrosion sous contrainte dans les aciers inoxydables austénitiques pré-déformés et exposés en milieu primaire des REP, 2012.

R. Jacko, G. Economy, and F. Pement, The influence of dissolved hydrogen on primary water stress corrosion cracking of alloy 600 at PWR steam generator operating temperatures, Proceedings of the 5th international symposium on environmental degradation of materials in nuclear power systems -water reactors, pp.613-620, 1991.

A. H. King, Diffusion induced grain boundary migration, International Materials Reviews, vol.4, issue.1, pp.173-189, 1987.
DOI : 10.1016/0036-9748(85)90027-4
URL : https://hal.archives-ouvertes.fr/jpa-00230353

U. Kocks, Laws for Work-Hardening and Low-Temperature Creep, Journal of Engineering Materials and Technology, vol.98, issue.1, pp.76-85, 1975.
DOI : 10.1115/1.3443340

P. Laghoutaris, Corrosion sous contrainte de l'Alliage 600 en milieu primaire des réacteurs à eau sous pression : apport à la compréhension des mécanismes, Thèse MINES ParisTech, 2009.

L. Claire, A. D. , and A. Rabinovitch, A mathematical analysis of diffusion in dislocations. I. Application to concentration 'tails', Journal of Physics C: Solid State Physics, vol.14, issue.27, pp.3863-3879, 1981.
DOI : 10.1088/0022-3719/14/27/011

L. Hong, S. , C. Amzallag, and A. Gelpi, Modelling of the SCC initiation on alloy 600 in primary water of PWRs, 9th International Symposium on Environmental Degradation of Materials in Nuclear power systems water reactors Newport Beach, p.115, 1999.

Y. Lim, H. Kim, and S. Hwang, Microstructural characterization on intergranular stress corrosion cracking of Alloy 600 in PWR primary water environment, Journal of Nuclear Materials, vol.440, issue.1-3, pp.1-3, 2013.
DOI : 10.1016/j.jnucmat.2013.03.088

D. Liu, W. A. Miller, and K. T. Aust, Diffusion induced grain boundary migration and recrystallization during oxidation of a Ni-48.5 Pct Cu Alloy, Metallurgical and Materials Transactions A 19A, pp.1667-1675, 1988.

N. Lorho, SCC susceptibility in Alloy 600 with different strain histories, Thèse de l, 2013.

N. Louat, C. S. Pande, and B. B. Rath, A new approach to diffusion-induced grain boundary motion, Philosophical Magazine A, vol.17, issue.6, pp.73-77, 1985.
DOI : 10.1016/0036-9748(83)90105-9

L. Marchetti, Corrosion généralisée des alliages à base nickel en milieu aqueux à haute température : apport à la compréhension des mécanismes, Thèse MINES de Saint-Etienne, 2007.

S. Meache, R. Borch, J. Groza, A. Mukherjee, H. Green et al., Activation parameters of hightemperature creep in polycrisalline nickel at ambiant and high pressures, Acta Metall. Mater, vol.40, issue.1, p.159, 1992.

B. Million, Diffusion in Fe???Ni???Cr alloys with an F.C.C. lattice, Materials Science and Engineering, vol.72, issue.1, pp.85-100, 1985.
DOI : 10.1016/0025-5416(85)90069-2

Y. Mishin and I. Razumovskii, A model for diffusion along a moving grain boundary, Acta Metallurgica et Materialia, vol.40, issue.4, pp.839-845, 1992.
DOI : 10.1016/0956-7151(92)90026-B

Y. Mishin, F. Güthoff, and C. Herzig, Self-diffusion along stationnary and moving grain boundaries in alpha-Hf, Z. Metallkd, vol.84, issue.8, pp.584-591, 1993.

A. Molander, Comparison of PWSCC initiation crack growth data for alloy 600, International Conference on Water Chemistry of Nuclear Reactor Systems, 2008.

K. Monma, O. Suto, and O. Hiroshi, Diffusion of Ni<SUP>63</SUP> and Cr<SUP>51</SUP> in Nickel-Chromium Alloys (On the Relation between High-Temperature Creep and Diffusion in Nickel Base Solid Solutions. I), Journal of the Japan Institute of Metals and Materials, vol.28, issue.4, pp.188-192, 1964.
DOI : 10.2320/jinstmet1952.28.4_188

A. J. Mortlock, The effect of segregation on the solute diffusion enhancement due to the presence of dislocations, Acta Metallurgica, vol.8, issue.2, pp.132-133, 1960.
DOI : 10.1016/0001-6160(60)90099-7

D. Morton, S. A. Attanasio, and G. Young, Primary water SCC understanding and characterization through fundamental testing in the vicinity of the Nickel/Nickel Oxide phase transition, Tenth International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors Nevada, 2001.

S. P. Murarka, Diffusion of Chromium in Nickel, Journal of Applied Physics, vol.80, issue.4, p.1339, 1964.
DOI : 10.1063/1.1699563

F. Nabarro, &. Taylor, and . Francis, The Physics of Creep, 1995.

T. Nakagawa, A. Nakamura, I. Sakaguchi, N. Shibata, T. Mizoguchi et al., Cation diffusion along basal dislocations in sapphire, Acta Materialia, vol.59, issue.3, pp.1105-1111, 2011.
DOI : 10.1016/j.actamat.2010.10.041

P. Nash, Binary Alloy Phase Diagrams 2 " ASM Inter, pp.1298-1302, 1991.

A. Nicolas, Etude de l'Evolution Physico-Chimique du Substrat lors de l'Oxydation a Haute Temperature des Alliages Modele Ni-Cr et Ni-16Cr-9Fe, Thèse Mines Saint-Etienne, 2013.
URL : https://hal.archives-ouvertes.fr/tel-00848591

M. Olszta, D. Schreiber, M. Toloczko, and S. Bruemmer, Microstructure, Corrosion and Stress Corrosion Crack initiation of Alloy 600 in PWR primary water environments, 2013.

J. Pan and R. Ballufi, Diffusion induced grain boundary migration in and thin films, Acta Metallurgica, vol.30, issue.4, pp.861-870, 1982.
DOI : 10.1016/0001-6160(82)90084-0

J. Panter, Etude de la corrosion sous contrainte des alliages 690 et 600 en milieu primaire des REP : influence des procédés de fabrication des tubes de générateurs de vapeur sur la phase d'amorcage, Thèse de Institut National, 2002.

L. Priester, Joints de grains Théorie et expérimentation Techniques de l'ingénieur Étude des métaux et des alliages : état métallique base documentaire : TIB345DUO(ref. article : m4011), 2010.

L. Priester, Joints de grains et plasticité cristalline, 2011.

D. D. Pruthi, M. S. Anand, and R. P. Agarwala, Diffusion of chromium in Inconel-600, Journal of Nuclear Materials, vol.64, issue.1-2, pp.206-210, 1977.
DOI : 10.1016/0022-3115(77)90026-5

W. T. Read and W. Shockley, Dislocation Models of Crystal Grain Boundaries, Physical Review, vol.60, issue.3, pp.275-289, 1950.
DOI : 10.1103/PhysRev.60.397

R. Rebak, A. Mciiree, and Z. Szklarska, Effect of pH and stress intensity on crack growth rate in alloy 600 in lithiated + borated water at high temperature, 5th International symposium on environmental degradation of materials in nuclear power systems-water reactors, p.511, 1992.

F. N. Rhines and A. M. Montgomery, A New Type of Structure in the ??-Copper-Zinc Alloys, Nature, vol.141, issue.3566, p.413, 1938.
DOI : 10.1038/141413a0

E. Richey, D. Morton, and M. Schurman, SCC initiation testing of nickel-based alloys using insitu monitored uniaxial tensile specimens, The 12th International Conference on Environmental Degradation of Materials in Nuclear Power System -Water Reactors Salt Lake City, 2005.

R. Rios, Etude des mécanismes de corrosion sous contrainte de l'Alliage 600 (NC15Fe) dans l'eau à haute température, 1993.

R. L. Rowland, SELF-DIFFUSION OF PALLADIUM IN SILVER-PALLADIUM ALLOYS, The Journal of Physical Chemistry, vol.67, issue.12, pp.2817-2821, 1963.
DOI : 10.1021/j100806a075

A. Ruoff, Enhanced Diffusion during Plastic Deformation by Mechanical Diffusion, Journal of Applied Physics, vol.90, issue.10, pp.3999-4003, 1967.
DOI : 10.1063/1.1736115

I. Sakaguchi, H. Yurimoto, and S. Sueno, Self-diffusion along dislocations in single-crystals MgO, Solid State Communications, vol.84, issue.9, pp.889-893, 1992.
DOI : 10.1016/0038-1098(92)90453-G

D. Schreiber, M. Olszta, and S. Bruemmer, Grain boundary depletion and migration during selective oxidation of Cr in a Ni???5Cr binary alloy exposed to high-temperature hydrogenated water, Scripta Materialia, vol.89, pp.41-44, 2014.
DOI : 10.1016/j.scriptamat.2014.06.022

D. Schreiber, M. Olszta, L. Thomas, and S. Bruemmer, Grain boundary characterization of Alloy 600 prior to and after corrosion by atom probe tomography and transmission electron microscopy, Proc. 16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, 2013.

P. Scott, An Overview of Internal Oxidation as a Possible Explanation of Intergranular Stress Corrosion Cracking of Alloy 600 in PWRS, 1999.
DOI : 10.1115/1.3443507

P. M. Scott, Some possible mechanisms of intergranular stress corrosion cracking of Alloy 600 in PWR primary water, Proceedings of the sixth international symposium on environmental degradation of materials in nuclear power systems -water reactors, pp.657-667, 1993.

M. Sennour, P. Laghoutaris, C. Guerre, and R. Molins, Advanced TEM characterization of stress corrosion cracking of Alloy 600 in pressurized water reactor primary water environment, Journal of Nuclear Materials, vol.393, issue.2, pp.254-266, 2009.
DOI : 10.1016/j.jnucmat.2009.06.014
URL : https://hal.archives-ouvertes.fr/hal-00423736

T. Shoji, Z. Lu, and H. Murakami, Formulating stress corrosion cracking growth rates by combination of crack tip mechanics and crack tip oxidation kinetics, Corrosion Science, vol.52, issue.3, pp.769-779, 2010.
DOI : 10.1016/j.corsci.2009.10.041

E. P. Simonen, L. E. Thomas, and S. M. Bruemmer, Consequences of Selective Oxidation during Crack-tip Corrosion, 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-water reactors, 2007.

R. Soulas, Effet de la cristallographie sur les premiers stades de l'oxydation des aciers austénitiques 316 L, Thèse de Doctorat, 2012.

R. W. Staehle, Introduction to initiation Workshop on Detection, Avoidance, Mechanisms, Modelling, and Prediction of SCC Initiation in Water-Cooled Nuclear Reactor PlantsQuantitative assessment of intergranular damage due to PWR primary water exposure in structural Ni-based alloys, Corrosion Science, vol.67, pp.11-19, 2008.

L. E. Thomas and S. M. Bruemmer, High-Resolution Characterization of Intergranular Attack and Stress Corrosion Cracking of Alloy 600 in High-Temperature Primary Water, CORROSION, vol.56, issue.6, pp.572-587, 2000.
DOI : 10.5006/1.3280561

K. N. Tu, Kinetics of thin???film reactions between Pb and the AgPd alloy, Journal of Applied Physics, vol.2, issue.8, p.3400, 1977.
DOI : 10.1063/1.1661708

F. Vaillant, Evaluation en laboratoire des vitesses de propagation par corrosion sous contrainte en milieu primaire de matériaux massifs en alliage 600, 2002.

C. Wagner, Theoretical Analysis of the Diffusion Processes Determining the Oxidation Rate of Alloys, Journal of The Electrochemical Society, vol.99, issue.10, pp.369-380, 1952.
DOI : 10.1149/1.2779605

Z. Wang, L. Fang, I. Cotton, and R. Freer, Ni???Cu interdiffusion and its implication for ageing in Ni-coated Cu conductors, Materials Science and Engineering: B, vol.198, pp.86-94, 2015.
DOI : 10.1016/j.mseb.2015.04.006

A. R. Wazzan and J. E. Dorn, Analysis of Enhanced Diffusivity in Nickel, Journal of Applied Physics, vol.252, issue.1, pp.222-228, 1965.
DOI : 10.1016/0001-6160(57)90127-X

M. Wehbi, Modelisation de l'amorcage de la corrosion sous contrainte dans les alliages base nickel 182 et 82 en milieu primaire des reacteurs a eau sous pression, Thèse de Doctorat, 2014.
URL : https://hal.archives-ouvertes.fr/tel-01142433

W. Xiong, Thermodynamic and Kinetic Investigation of the Fe-Cr-Ni System Driven by Engineering Applications, 2012.