A-20) ,
A computer model for fatigue crack growth from rough surfaces, International Journal of Fatigue, vol.22, issue.7, pp.619-630, 2000. ,
DOI : 10.1016/S0142-1123(00)00018-9
« Superplastic deformation of Ti-6Al-4V alloy ». Metallurgical Transactions A, pp.1591-1596, 1977. ,
« The effects of environment and internal oxygen on fatigue crack propagation in Ti-6Al-4V ». Materials Science and Engineering A, pp.234-236, 1997. ,
The Propagation of Adiabatic Shear, pp.531-543, 1973. ,
DOI : 10.1007/978-1-4615-8696-8_30
Effect of Recrystallized Grain Size on Grain Growth, Journal of Applied Physics, vol.73, issue.5, pp.507-509, 1948. ,
DOI : 10.1103/PhysRev.73.526
Influence of environment on fatigue mechanisms in high-temperature titanium alloy IMI834, International Journal of Fatigue, vol.27, issue.10-12, pp.1485-1493, 2005. ,
DOI : 10.1016/j.ijfatigue.2005.06.009
Compréhension des mécanismes de coupe lors de perçage à sec de l'empilage Ti6Al4V/Composite fibre de carbone, Thèse. Ecole Nationale Supérieure d'Arts et Métiers, 2010. ,
Materials properties handbook -Titanium alloys, 1994. ,
Determination of omega phase morphology in Ti-35%Nb by transmission electron microscopy ». Philosophical Magazine, pp.477-486, 1967. ,
Etude du comportement en sollicitations extrêmes et de l'usinabilité d'un nouvel alliage de titane aéronautique : le Ti555-3. Ecole Nationale Supérieure d'Arts et Métiers, 2010. ,
Heat treatment, structure and properties of nonferrous alloys, 1982. ,
Influence des contraintes résiduelles induites par usinage sur la tenue en fatigue des matériaux métalliques aéronautiques, Thèse. Arts et Métiers ParisTech, 1991. ,
« The process of transition of the cubic body-centered modification into the hexagonal close-packed modification of zirconium ». Metallwirtschaft, p.785, 1934. ,
Tool condition monitoring (TCM) -the status of research and industrial application ». CIRP Annals, pp.541-567, 1995. ,
« A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V ». International Journal of Machine Tools and Manufacture, pp.275-288, 2008. ,
Etude des aspects thermiques de la coupe orthogonale d'un acier au carbone, Thèse. Ecole Nationale Supérieure d'Arts et Métiers, 1995. ,
« Contribution à l'étude métallographique et structurale de l'alliage de titane TA6V ». Mémoires Scientifiques de la Revue de Métallurgie, pp.1025-1058, 1966. ,
The effect of machining on surface integrity of titanium alloy Ti???6% Al???4% V, Journal of Materials Processing Technology, vol.166, issue.2, pp.188-192, 2005. ,
DOI : 10.1016/j.jmatprotec.2004.08.012
Process effects on white layer formation in hard turning ». Transactions of the SME, pp.117-122, 1998. ,
Métallurgie et recyclage du titane et ses alliages ,
Superplastic deformation characteristics of two microduplex titanium alloys, Journal of Materials Science, vol.21, issue.3, pp.4003-4008, 1986. ,
DOI : 10.1016/0079-6425(76)90005-0
Thermal Instability Strain in Dynamic Plastic Deformation, pp.519-530, 1973. ,
DOI : 10.1007/978-1-4615-8696-8_29
Superplastic deformation of strongly textured Ti-6Al-4V », Journal of Materials Science, vol.20, pp.1976-1984, 1985. ,
The effect of strain rate, temperature and texture on anisotropic deformation in Ti-6Al-4V, Journal of Materials Science, vol.14, issue.5, pp.1525-1532, 1986. ,
DOI : 10.1007/BF01114705
Martensitic transformations in Ti-Mo alloys, Martensitic transformations in Ti-Mo alloys, pp.712-722, 1979. ,
DOI : 10.1016/0022-5088(74)90158-1
A study of plastic strain and plastic strain rate in machining of steel AISI 1045 using FEM analysis, Materials & Design, vol.30, issue.1, pp.160-165, 2009. ,
DOI : 10.1016/j.matdes.2008.04.029
Introduction aux traitements thermiques des métaux et alliages » ,
Metals Handbook, properties and selection: non ferrous alloys and specialpurpose materials, pp.592-633, 1990. ,
Width of adiabatic shear bands formed under combined stresses, Materials Science and Technology, vol.675, issue.5, pp.557-559, 1989. ,
DOI : 10.1016/0025-5416(73)90066-9
Maîtrise de l'intégrité de surface par la surveillance d'usinage sur les pièces critiques en superalliages de turbomoteurs aéronautiques, 2011. ,
Heat and Mass Transfer, Journal of Applied Mechanics, vol.27, issue.1, 1959. ,
DOI : 10.1115/1.3643929
Influences of surface roughness and residual stress on fatigue life of ground steel components ». Metals Technology, pp.221-225, 1980. ,
Metals Handbook, Properties and selection : non ferrous alloys and special-purpose materials : titanium and titanium alloys casting, 1990. ,
Titanium alloys and their machinability???a review, Journal of Materials Processing Technology, pp.262-274, 1997. ,
DOI : 10.1016/S0924-0136(96)00030-1
« Surface integrity of finished turned Ti-6Al- 4V alloy with PCD tools using conventional and high pressure coolant supplies ». International Journal of Machine Tools and Manufacture, pp.884-891, 2007. ,
Evaluation of anomalies produced during turning of Ti64, Snecma ? Projet ManHIRP, 2005. ,
« The influence of surface roughness on the fatigue life and scatter of test results of two steels, Proceedings -American Society for Testing and Materials, pp.584-592, 1951. ,
Phase transformations and strengthening mechanisms in the alloy Ti-6Al-4V ». Transactions of the ASM, pp.324-332, 1969. ,
Proposal for definition of anomaly types and characterisation, Snecma ? Projet ManHIRP, 2002. ,
Smithells Metals Reference Book, 2004. ,
Titanium and titanium dioxide. United State Geological Survey, 2011. ,
« Growth order and activation energies for grain growth of Ti-6Al-4V alloy in ? phase, Scripta Metallurgica et Materialia, pp.2843-2848, 1991. ,
Grain growth kinetics of pure titanium, Scripta Metallurgica et Materialia, pp.1361-1366, 1995. ,
DOI : 10.1016/0956-716X(95)00367-5
Formation of ??-Widmanst??tten structure: effects of grain size and cooling rate on the Widmanst??tten morphologies and on the mechanical properties in Ti6Al4V alloy, Journal of Alloys and Compounds, vol.329, issue.1-2, pp.142-152, 2001. ,
DOI : 10.1016/S0925-8388(01)01571-7
Contribution à la modélisation de la formation du copeau en usinage des métaux ,
Modélisation de la coupe des métaux ,
Adiabatic shear banding under pure shear loading Part I: direct observation of strain localization and energy dissipation measurements, Mechanics of Materials, vol.7, issue.1, pp.59-71, 1988. ,
DOI : 10.1016/0167-6636(88)90006-3
Adiabatic shear localization in titanium and Ti-6 Pct Al-4 ,
DOI : 10.1007/bf02814827
Metallurgical Transactions A, pp.761-775, 1985. ,
Rapport de travaux et essais de caractérisation. Snecma, 2007. ,
Combres Y. « The deformation mechanisms in the ?metastable ?-CEZ titanium alloy ». Scripta Materialia, pp.21-28, 1997. ,
« Real time acoustic emission monitoring for surface damage in hard machining ». International Journal of Machine Tools and Manufacture, pp.1622-1627, 2005. ,
Superplastic sheet forming, NATO/Agard Lecture Series on Superplasticity, pp.1-23, 1987. ,
« Contribution à l'étude des transformations de l'alliage de titane TA6V en conditions isothermes, Mémoires Scientifiques de la Revue de Métallurgie, pp.583-590, 1970. ,
Disorder and Order in Solid Solutions of Oxygen in alpha-Titanium., Acta Chemica Scandinavica, vol.16, pp.1245-1250, 1962. ,
DOI : 10.3891/acta.chem.scand.16-1245
« Fatigue and microstructural properties of quenched Ti-6Al-4V ». Metallurgical Transactions A, pp.233-240, 1983. ,
Sn and Al addition on the mechanical properties of metastable? titanium alloys ». The Sumitomo Search, pp.41-47, 1993. ,
The redistribution of alloying elements by rapid-heating solution treatment of an (? +?) titanium alloy, Journal of Materials Science, vol.14, issue.7, pp.2519-2524, 1986. ,
DOI : 10.1007/BF01114300
Structure and mechanical properties of high-temperature titanium alloys after rapid heat treatment, Materials Science and Engineering: A, vol.168, issue.1, pp.23-28, 1993. ,
DOI : 10.1016/0921-5093(93)90264-F
Potential of rapid heat treatment of titanium alloys and steels, Materials Science and Engineering: A, vol.263, issue.2, pp.142-154, 1999. ,
DOI : 10.1016/S0921-5093(98)01173-3
Grain growth and texture evolution in Ti???6Al???4V during beta annealing under continuous heating conditions, Materials Science and Engineering: A, vol.337, issue.1-2, pp.88-96, 2002. ,
DOI : 10.1016/S0921-5093(01)01990-6
Bobic I. « The effect of annealing temperatures and cooling rates on microstructure and mechanical properties of investment cast Ti-6Al-4V alloy ». Materials and Design, pp.192-199, 2006. ,
Effect of oxygen on the hardness and alpha/bêta phase ratio of Ti-6Al-4V alloy ». Scripta Metallurgica, pp.1287-1290, 1986. ,
« Deformation twinning in difficult-towork alloys during severe plastic deformation, Materials Science and Engineering A, pp.410-411, 2005. ,
DOI : 10.1016/j.msea.2005.08.021
Thermodynamics and kinetics of martensitic transformations ». Progress in Metal Physics, pp.165-246, 1958. ,
The lattice stability of metals?I. titanium and zirconium ». Acta Metallurgica, pp.575-587, 1959. ,
« Tools and dies for industry, Metal Society of London Proceeding Conference, 1976. ,
Instruction Manual ? Quartz 3-component tool holder dynamometer Type 9121 ,
Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti???6Al???6V???2Sn, Wear, vol.202, issue.2, pp.142-148, 1997. ,
DOI : 10.1016/S0043-1648(96)07255-9
Applied research on the machinability of titanium and its alloys, Agard Conference Proceedings 256, 1979. ,
« Effect of machining variables on the surface and structural integrity of titanium, Proceedings of the North American Manufacturing Research Conference, pp.1-9, 1973. ,
« Phase transformations in bêta isomorphous titanium alloys ». Acta Metallurgica, pp.579-588, 1970. ,
DOI : 10.1016/0001-6160(70)90087-8
Processing map for the hot working of near-alpha titanium alloy 685, Journal of Materials Processing Technology, pp.377-383, 1997. ,
« The production of ductile titanium ». Transactions of the electrochemical society, pp.35-47, 1940. ,
Criteria for predicting metallurgical instabilities in processing. Thesis, 1987. ,
Metals Handbook, properties and selection: non ferrous alloys and specialpurpose materials, pp.592-633, 1990. ,
Microstructural Aspects of Adiabatic Shear Failure in Annealed Ti6Al4V, Metallurgical and Materials Transactions A. 2010, pp.389-396 ,
DOI : 10.1088/0370-1301/62/11/302
Young's modulus and damping of Ti???6Al???4V alloy as a function of heat treatment and oxygen concentration, Materials Science and Engineering: A, vol.128, issue.1, pp.77-89, 1990. ,
DOI : 10.1016/0921-5093(90)90097-M
Effect of precipitates on damping capacity and mechanical properties of Ti???6Al???4V alloy, Materials Science and Engineering: A, vol.486, issue.1-2, pp.19-26, 2008. ,
DOI : 10.1016/j.msea.2007.08.053
Microstructure of Ti5Al2.5Sn and Ti6Al4V deformed in tensile and fatigue tests, Journal of Nuclear Materials, vol.305, issue.1, pp.52-59, 2002. ,
DOI : 10.1016/S0022-3115(02)00888-7
Dynamic recrystallization induced by plastic deformation at high strain rate in a Monel alloy, Materials Science and Engineering: A, vol.276, issue.1-2, pp.250-256, 2000. ,
DOI : 10.1016/S0921-5093(99)00127-6
Deformation localization and recrystallization in TC4 alloy under impact condition, Materials Science and Engineering: A, vol.395, issue.1-2, pp.98-101, 2005. ,
DOI : 10.1016/j.msea.2004.12.020
The kinetics of precipitation from supersaturated solid solutions, Journal of Physics and Chemistry of Solids, vol.19, issue.1-2, pp.35-50, 1961. ,
DOI : 10.1016/0022-3697(61)90054-3
Modélisation du procédé de projection laser -Application au Ti-6Al-4V, 2010. ,
Fabrication directe de pièces aéronautiques en TA6V et IN718 : projection et fusion sélective par laser, Thèse. Ecole Nationale Supérieure des Mines de Paris, 2008. ,
Etude des transformations en refroidissement continu de l'alliage de titane TA6V ». Mémoires Scientifiques de la Revue de Métallurgie, pp.563-574, 1970. ,
« Using material behaviour models to develop process control strategies », JOM, vol.44, pp.6-8, 1992. ,
DOI : 10.1007/bf03222246
Comportement mécanique et évolution structurale de l'alliage de titane Ti-6%Al- 4%V dans le domaine du forgeage à chaud, Thèse. Ecole Nationale Supérieure des Mines de Paris, 1983. ,
Usinage assisté par laser du bore. Thèse, 2001. ,
Surface integrity and fatigue life of turned gamma titanium aluminide, Journal of Materials Processing Technology, pp.413-420, 1997. ,
DOI : 10.1016/S0924-0136(97)00204-5
Dynamic deformation and adiabatic shear microstructures associated with ballistic plug formation and fracture in Ti???6Al???4V targets, Materials Science and Engineering: A, vol.454, issue.455, pp.454-455, 2007. ,
DOI : 10.1016/j.msea.2006.11.097
Binary alloy phase diagrams, 1990. ,
On the adiabatic shear of Ti???6Al???4V ballistic targets, Materials Science and Engineering, vol.58, issue.2, pp.181-188, 1983. ,
DOI : 10.1016/0025-5416(83)90044-7
?? Grain size and ?? volume fraction aspects of the superplasticity of Ti-6Al-4V, Materials Science and Engineering: A, vol.136, pp.71-78, 1991. ,
DOI : 10.1016/0921-5093(91)90442-P
Capteur de mesure sans contact à ,
« Influence of tempering temperature and time one the ?'-Ti-6Al-4V martensite », Journal of Alloys and Compounds, vol.234, pp.287-289, 1996. ,
« Adiabatic shear bands and examples of their role in severe plastic deformation », Journal of Materials Science, vol.37, issue.16, pp.3337-3360, 2002. ,
DOI : 10.1023/A:1016541023502
Microstructure evolution associated with adiabatic shear bands and shear band failure in ballistic plug formation in Ti???6Al???4V targets, Materials Science and Engineering: A, vol.516, issue.1-2, pp.205-216, 2009. ,
DOI : 10.1016/j.msea.2009.03.051
Allowable stresses for steel members of finite life, Proceedings of the Society of Experts for Stress Analysis, pp.132-143, 1948. ,
« The effect of machined topography and integrity on fatigue life ». International Journal of Machine Tools and Manufacture, pp.125-133, 2004. ,
« Strain induced transformations and plasticity in transage Ti-11, pp.315-320, 1982. ,
DOI : 10.1051/jphyscol:1982444
« Determination of work material flow stress and friction for FEA of machining using orthogonal cutting tests, Journal of Materials Processing Technology, pp.153-154, 2004. ,
Contraintes résiduelles induites par les principaux traitements de surface sur les matériaux utilisés à Snecma Moteurs. Snecma, 2005. ,
« Criterion for the action of applied stress in the martensitic transformation ». Acta Metallurgica, pp.531-538, 1953. ,
Microstructural influences on superplasticity in Ti-6Al-4V ». Metallurgical Transactions A, pp.241-250, 1979. ,
Etudes métallurgique, mécanique et thermique de l'intégrité de surface des pièces percées au foret hélicoïdal dans l'Inconel 718TR ? Détection et quantification des anomalies par process monitoring, Thèse. Ecole Nationale Supérieure des Mines de Paris, p.333, 2007. ,
Influence of Grain Size and Microstructure on Oxidation Rates in Titanium Alloy Ti-6Al-4V Under Superplastic Forming Conditions, Journal of Materials Engineering and Performance, vol.13, issue.6, pp.727-734, 2004. ,
DOI : 10.1361/10599490421394
Part II crystallography and morphology of the ?? ??? ?? massive transformation in Ag-26 a/o Al, Acta Metallurgica, vol.28, issue.8, pp.1041-1057, 1980. ,
DOI : 10.1016/0001-6160(80)90088-7
The thermodynamics and kinetics of the ??? ?m transformation in three Ti-X systems ». Acta Metallurgica, pp.1293-1305, 1978. ,
Aaronson H. I. « On the existence of the ??? ?m transformation in the alloy systems, Metallurgical and Materials Transactions A, pp.1885-1892, 1977. ,
An experimental investigation of work material microstructure effects on white layer formation in PCBN hard turning ». International Journal of Machine Tools and Manufacture, pp.211-218, 2005. ,
Modeling of dynamic material behavior in hot deformation: forging of Ti-6242 ». Metallurgical Transactions A, pp.1883-1892, 1984. ,
« Recent advances in the science of mechanical processing, Indian Journal of Technology, vol.28, pp.435-451, 1990. ,
Processing maps for hot working of titanium alloys ». Material Science and Engineering, pp.82-88, 1998. ,
A Study of Beta Processing of Ti-6Al-4V: Is it Trivial?, Journal of Engineering Materials and Technology, vol.16, issue.3, pp.355-360, 2001. ,
DOI : 10.1017/CBO9780511525230.013
Catastrophic thermoplastic shear ». Journal of applied mechanics, pp.189-193, 1964. ,
DOI : 10.1115/1.3629585
« Surface integrity in finish hard turning of case hardened steels ». International Journal of Machine Tools and Manufacture, pp.543-550, 2003. ,
Investigation of near surface structure in order to determine processs-temperatures during different machining processes of Ti6Al4V, Scripta Materialia, pp.121-126, 2004. ,
The effect of rapid heat treatment on the high-temperature tensile behavior of superplastic Ti-6Al-4V ». Metallurgical and Materials Transactions A, pp.83-92, 2002. ,
Superplastic microstructures, Materials Science and Technology, vol.22, issue.1297, pp.1145-1156, 1990. ,
DOI : 10.1016/0036-9748(89)90432-8
Simulation numérique du soudage du TA6V par laser YAG impulsionnel: caractérisation expérimentale et modélisation des aspects thermomécaniques associées à ce procédé, Thèse, Ecole Nationale Supérieure des Mines de Paris, 2007. ,
Adiabatic Plastic Deformation, Annual Review of Materials Science, vol.9, issue.1, pp.283-311 ,
DOI : 10.1146/annurev.ms.09.080179.001435
Morphologies structurales de l'alliage de titane TA6V : incidences sur les propriétés mécaniques, le comportement à la rupture et la tenue en fatigue, Thèse. Ecole Nationale Supérieure des Techniques Avancées, 1977. ,
A fundamental study on the impact of surface integrity by hard turning on rolling contact fatigue, International Journal of Fatigue, vol.28, issue.12, pp.1838-1844, 2006. ,
DOI : 10.1016/j.ijfatigue.2005.12.002
Influence on texture on beta grain growth during continuous annealing of Ti???6Al???4V, Materials Science and Engineering: A, vol.299, issue.1-2, pp.225-234, 2001. ,
DOI : 10.1016/S0921-5093(00)01371-X
Réponse des alliages de titane aux traitements thermiques ». Mémoires Scientifiques de la Revue de Métallurgie, pp.291-304, 1965. ,
Hot working of commercial Ti???6Al???4V with an equiaxed ??????? microstructure: materials modeling considerations, Materials Science and Engineering: A, vol.284, issue.1-2, pp.184-194, 2000. ,
DOI : 10.1016/S0921-5093(00)00741-3
The effects of machined workpiece surface integrity on the fatigue life of ??-titanium aluminide, International Journal of Machine Tools and Manufacture, vol.41, issue.11, pp.1681-1685, 2001. ,
DOI : 10.1016/S0890-6955(01)00034-7
Investigation of the heat treatability of the 6% aluminium-4% vanadium titanium-base alloy ». Transactions of the ASM, pp.657-676, 1956. ,
Influence of surface roughness on the fatigue stress of steels and non ferrous alloys ». Engineer Digest, pp.109-112, 1957. ,
The mechanism of phase transformations in metals, 1956. ,
Influence des états de surface sur la tenue à la fatigue oligocyclique des alliages TA6V -Inco 718 -maraging 250 ». Rapport technique, 1986. ,
« Methods for improving efficiency in turning Ti6Al4V, 10th World Conference on Titanium. [s.l.] : [s, 2003. ,
« Effect of scratches and of various workshop finishes upon the fatigue strength of steel ». Engineering, pp.449-485, 1923. ,
« The structure of adiabatic shear bands in a titanium alloy ». Acta metallurgica, pp.667-676, 1985. ,
« The structure of adiabatic shear bands in metals: a critical review ». Acta metallurgica, pp.301-306, 1987. ,
Ti???6Al???4V: Deformation map and modelisation of tensile behaviour, Thèse, 2007. ,
DOI : 10.1016/j.matdes.2007.06.005
Ti???6Al???4V: Deformation map and modelisation of tensile behaviour, Materials & Design, vol.29, issue.6, pp.1090-1098, 2008. ,
DOI : 10.1016/j.matdes.2007.06.005
Etude des copeaux et de l'intégrité de surface en usinage à grande vitesse de l'alliage de titane TA6V, Thèse. Ecole Nationale d'Ingénieurs de Metz, 2007. ,
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting, Metallurgical and Materials Transactions A. 2011, pp.3190-3199 ,
DOI : 10.1016/0921-5093(90)90097-M
URL : https://hal.archives-ouvertes.fr/hal-00624108
Property investigation of laser cladded, laser melted and electron beam melted Ti- 6Al-4V. Cost effective manufacturing via net-shape processing ». In : Cost effective manufacture via net-shape processing, RTO-MP-AVT-139, 2006. ,
Mechanical surface treatments on titanium, aluminum and magnesium alloys ». Materials Science and Engineering A, pp.210-216, 1999. ,
DOI : 10.1016/s0921-5093(98)01168-x
Microstructure evolution of adiabatic shear bands and mechanisms of saw-tooth chip formation in machining Ti6Al4V, Materials Science and Engineering: A, vol.531, pp.155-163 ,
DOI : 10.1016/j.msea.2011.10.050
Introduction to physical system modeling, 1979. ,
Deformation characteristics of age hardened Ti-6Al-4V ». Metallurgical Transactions A, pp.169-177, 1977. ,
« Deformation modes of the alpha phase of Ti-6Al-4V as a function of oxygen concentration and aging temperature ». Metallurgical Transactions A, pp.889-899, 1982. ,
« A comparison of phase transformations in three commercial titanium alloys ». Transactions of the ASM, pp.373-383, 1967. ,
« The effect of ternary additions on the decomposition of metastable beta-phase titanium alloys ». Metallurgical Transactions, pp.477-484, 1971. ,
Adiabatic shear of titanium and polymethylmethacrylate ». Philosophical Magazine, pp.765-773, 1975. ,
« Alpha-beta transformation in titanium ». Transactions of the AIME, pp.875-881, 1959. ,
Metallographic features associated with the penetration of titanium alloy targets ». Metallurgical Transactions A, pp.569-573, 1979. ,
Thermoplastic shear localisation in titanium alloys during dynamic deformation, Materials Science and Technology, vol.35, issue.5, pp.609-611, 2000. ,
DOI : 10.1016/0167-6636(88)90007-5
« Deformation, phase transformation and recrystallization in the shear bands induced by high-strain rate loading in titanium and its alloys », Journal of Material Science and Technology, vol.22, pp.737-746, 2006. ,
Shear Localization in Dynamic Deformation: Microstructural Evolution, Metallurgical and Materials Transactions A, pp.811-843, 2008. ,
DOI : 10.1007/BF02648596
URL : http://meyersgroup.ucsd.edu/papers/journals/Meyers 296.pdf
Self-organization of shear bands in titanium and Ti???6Al???4V alloy, Acta Materialia, vol.50, issue.3, pp.575-596, 2002. ,
DOI : 10.1016/S1359-6454(01)00356-1
Mechanical Behavior and Microstructural Evolution during Superplastic Deformation of Ti–6Al–4V, Materials Transactions, JIM, vol.32, issue.5, pp.465-472, 1991. ,
DOI : 10.2320/matertrans1989.32.465
Effect of Strain Rate Upon Plastic Flow of Steel, Journal of Applied Physics, vol.11, issue.1, pp.22-32, 1944. ,
DOI : 10.1098/rspa.1934.0004
Effects of working, heat treatment, and aging on microstructural evolution and crystallographic texture of ??, ?????, ????? and ?? phases in Ti???6Al???4V wire, Materials Science and Engineering: A, vol.392, issue.1-2, pp.403-414, 2005. ,
DOI : 10.1016/j.msea.2004.09.072