P. Adler, Time-and-Motion Regained [WWW Document], Harv. Bus. Rev. URL, vol.01, pp.motion-regained, 1993.

P. S. Adler and B. Borys, Two Types of Bureaucracy: Enabling and Coercive, Administrative Science Quarterly, vol.41, issue.1, p.61, 1996.
DOI : 10.2307/2393986

B. Akinci, F. Boukamp, C. Gordon, D. Huber, C. Lyons et al., A formalism for utilization of sensor systems and integrated project models for active construction quality control, Automation in Construction, vol.15, issue.2, pp.124-138, 2006.
DOI : 10.1016/j.autcon.2005.01.008

Y. Aoyagi and R. J. Shephard, Aging and Muscle Function, Sports Medicine, vol.14, issue.6, pp.376-396, 1992.
DOI : 10.2165/00007256-199214060-00005

G. Arbez and L. G. Birta, ABCmod: a conceptual modelling framework for discrete event dynamic systems, Proceedings of the 2007 Summer Computer Simulation Conference. Society for Computer Simulation International, pp.987-995, 2007.

G. A. Ariëns, W. Van-mechelen, P. M. Bongers, L. M. Bouter, and G. Van-der-wal, Psychosocial risk factors for neck pain: A systematic review, American Journal of Industrial Medicine, vol.19, issue.2, pp.180-193, 2001.
DOI : 10.1016/S0169-8141(96)00037-6

S. Asensio-cuesta, J. A. Diego-mas, L. Canós-darós, and C. Andrés-romano, A genetic algorithm for the design of job rotation schedules considering ergonomic and competence criteria, The International Journal of Advanced Manufacturing Technology, vol.24, issue.9-12, pp.1161-1174, 2012.
DOI : 10.1016/0003-6870(93)90080-S

N. M. Ashkanasy, Diversity and Emotion: The New Frontiers in Organizational Behavior Research, Journal of Management, vol.37, issue.4, pp.307-338, 2002.
DOI : 10.1177/1059601100251004

J. W. Atkinson, J. R. Bastian, R. W. Earl, and G. H. Litwin, The achievement motive, goal setting, and probability preferences., The Journal of Abnormal and Social Psychology, vol.60, issue.1, p.27, 1960.
DOI : 10.1037/h0047990

A. Ayough, M. Zandieh, and H. Farsijani, GA and ICA approaches to job rotation scheduling problem: considering employee???s boredom, The International Journal of Advanced Manufacturing Technology, vol.53, issue.3, pp.651-666, 2012.
DOI : 10.1080/00140130903380893

N. Azizi, S. Zolfaghari, and M. Liang, Modeling job rotation in manufacturing systems: The study of employee's boredom and skill variations, International Journal of Production Economics, vol.123, issue.1, pp.69-85, 2010.
DOI : 10.1016/j.ijpe.2009.07.010

C. Babbage, The Economy of Machinery & Manufactures, 1992.

R. F. Babiceanu and F. F. Chen, Development and Applications of Holonic Manufacturing Systems: A Survey, Journal of Intelligent Manufacturing, vol.127, issue.6, pp.111-131, 2006.
DOI : 10.1007/978-3-642-78124-7

R. F. Babiceanu and R. Seker, Big Data and virtualization for manufacturing cyber-physical systems: A survey of the current status and future outlook, Computers in Industry, vol.81, pp.128-137, 2016.
DOI : 10.1016/j.compind.2016.02.004

R. Badham and U. Jurgens, Images of Good Work and the Politics of Teamwork, Economic and Industrial Democracy, vol.13, issue.4, pp.33-58, 1998.
DOI : 10.1007/978-1-349-24223-8

T. Baines, S. Mason, P. Siebers, and J. Ladbrook, Humans: the missing link in manufacturing simulation?, Simulation Modelling Practice and Theory, vol.12, issue.7-8, pp.515-526, 2004.
DOI : 10.1016/S1569-190X(03)00094-7

J. Banks, Handbook of simulation principles methodology advances, application and practice, 1998.

J. R. Barker, Tightening the Iron Cage: Concertive Control in Self-Managing Teams, Administrative Science Quarterly, vol.38, issue.3, 1993.
DOI : 10.2307/2393374

A. B. Becker, T. L. Galinsky, N. G. Swanson, and S. L. Sauter, Stress Control Interventions in Data Entry Work, Proceedings of the Human Factors and Ergonomics Society Annual Meeting, vol.40, issue.24, pp.1279-1279, 1996.
DOI : 10.1177/154193129604002456

T. Becker and H. Stern, Future Trends in Human Work area Design for Cyber-Physical Production Systems, Procedia CIRP, vol.57, pp.404-409, 2016.
DOI : 10.1016/j.procir.2016.11.070

S. Belmokhtar, A. Dolgui, N. Guschinsky, and G. Levin, Integer programming models for logical layout design of modular machining lines, Computers & Industrial Engineering, vol.51, issue.3, pp.502-518, 2006.
DOI : 10.1016/j.cie.2006.08.010
URL : https://hal.archives-ouvertes.fr/hal-00387641

C. L. Bennett and N. M. Edelson, Process Discipline: How to Maximize Profitability and Quality Through Manufacturing Consistency, 1998.

L. Berrah and G. Mauris, The industrial performance aggregation: towards a definition, IEEE International Conference on Systems, Man and Cybernetics, p.1176343, 2002.
DOI : 10.1109/ICSMC.2002.1176343

F. Boenzi, S. Digiesi, F. Facchini, and G. Mummolo, Ergonomic improvement through job rotations in repetitive manual tasks in case of limited specialization and differentiated ergonomic requirements, 8th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2016Troyes, pp.1667-1672, 2016.
DOI : 10.1016/j.ifacol.2016.07.820

F. Boenzi, S. Digiesi, G. Mossa, G. Mummolo, and V. A. Romano, Modelling Workforce Aging in Job Rotation Problems, 15th IFAC Symposium onInformation Control Problems inManufacturingINCOM 2015 48, pp.604-609, 2015.
DOI : 10.1016/j.ifacol.2015.06.148

P. M. Bongers, C. R. De-winter, M. A. Kompier, and V. H. Hildebrandt, Psychosocial factors at work and musculoskeletal disease., Scandinavian Journal of Work, Environment & Health, vol.19, issue.5, pp.297-312, 1993.
DOI : 10.5271/sjweh.1470

P. M. Bongers, A. M. Kremer, J. Laak, and . Ter, Are psychosocial factors, risk factors for symptoms and signs of the shoulder, elbow, or hand/wrist?: A review of the epidemiological literature, American Journal of Industrial Medicine, vol.19, issue.5, pp.315-342, 2002.
DOI : 10.1016/S0169-8141(96)00037-6

H. Braverman, Labor and Monopoly Capital, Monthly Review, vol.26, issue.3, 1998.
DOI : 10.14452/MR-026-03-1974-07_1

J. A. Buzacott and D. D. Yao, Flexible Manufacturing Systems: A Review of Analytical Models, Management Science, vol.32, issue.7, pp.890-905, 1986.
DOI : 10.1287/mnsc.32.7.890

J. Carlson and A. Row, How much does forgetting cost, Ind. Eng, vol.8, pp.40-47, 1976.

B. J. Carnahan, M. S. Redfern, and B. Norman, Designing safe job rotation schedules using optimization and heuristic search, Ergonomics, vol.12, issue.4, pp.543-560, 2000.
DOI : 10.1080/00140137808931804

S. Caroly, F. Coutarel, A. Landry, and I. Mary-cheray, Sustainable MSD prevention: Management for continuous improvement between prevention and production. Ergonomic intervention in two assembly line companies, Applied Ergonomics, vol.41, issue.4, pp.591-599, 2010.
DOI : 10.1016/j.apergo.2009.12.016
URL : https://hal.archives-ouvertes.fr/halshs-00715635

S. Chen and J. L. Dodd, Economic Value Added (EVA TM ): An Empirical Examination Of A New Corporate Performance Measure, J. Manag. Issues, vol.9, pp.318-333, 1997.

M. Cheurfa, Gestion des ressources humaines en production cyclique, Ecole Nationale, 2005.
URL : https://hal.archives-ouvertes.fr/tel-00849977

C. A. Chung, Simulation modeling handbook: a practical approach, 2004.

L. Claudon, K. Desbrosses, P. Wild, O. Remy, M. Gilles et al., Effects of artifacts in a repetitive light assembly task on muscular activity according to age and work rate constraints, Proc. 9th Int. Sci. Conf. Prev. Work-Relat. Musculoskelet. Disord. 303, 2016.

C. Constanze, Automotive Production Systems and Standardisation, 2005.

F. Coutarel, La prévention des troubles musculo-squelettiques en conception: quelles marges de manoeuvre pour le déploiement de l'activité?, 2004.

F. Coutarel, F. Daniellou, and B. Dugué, La prevenci??n de los trastornos m??sculo-esquel??ticos??: algunos desaf??os epistemol??gicos, Activites, vol.02, issue.1, 2005.
DOI : 10.1016/S0003-6870(00)00036-3

T. Cox, Stress Research and Stress Management: Putting theory to work, 1993.

B. Dale, Total Quality Management, 2015.
DOI : 10.1108/01443579410049261

T. Dayar, Analyzing Markov Chains using Kronecker Products, SpringerBriefs in Mathematics, pp.978-979, 2012.

B. C. De-zwart, M. H. Frings-dresen, and F. J. Van-dijk, Physical workload and the ageing worker: a review of the literature, International Archives of Occupational and Environmental Health, vol.14, issue.Suppl 1, pp.1-12, 1995.
DOI : 10.1093/geronj/23.3.269

K. Deb and D. Kalyanmoy, Multi-Objective Optimization Using Evolutionary Algorithms, 2001.

D. Pasquale, V. Miranda, S. Iannone, R. Riemma, and S. , A Simulator for Human Error Probability Analysis (SHERPA), Reliability Engineering & System Safety, vol.139, 2015.
DOI : 10.1016/j.ress.2015.02.003

M. Dorigo and T. Stützle, The ant colony optimization metaheuristic: Algorithms, applications, and advances, in: Handbook of Metaheuristics, pp.250-285, 2003.

G. Doumeingts, F. Clave, and Y. Ducq, ECOGRAI ??? A method to design and to implement Performance Measurement Systems for industrial organizations ??? Concepts and application to the Maintenance function, pp.350-368, 1995.
DOI : 10.1007/978-0-387-34847-6_39

M. Durand, N. Vézina, R. Baril, P. Loisel, M. Richard et al., Relationship between the margin of manoeuvre and the return to work after a long-term absence due to a musculoskeletal disorder: an exploratory study, Disability and Rehabilitation, vol.28, issue.13-14, pp.1245-1252, 2011.
DOI : 10.1007/s10926-005-8032-1

M. J. Durand, N. Vézina, P. Loisel, R. Baril, M. C. Richard et al., Workplace Interventions for Workers with Musculoskeletal Disabilities: A Descriptive Review of Content, Journal of Occupational Rehabilitation, vol.15, issue.1, pp.123-136, 2007.
DOI : 10.1080/10400435.2001.10132040

J. H. Dyer, Alliances and Asset Specificity as Sources of Japanese Competitive Advantage, Organization Science, vol.7, issue.6, pp.649-666, 1996.
DOI : 10.1287/orsc.7.6.649

K. El-ahrache, D. Imbeau, and B. Farbos, Percentile values for determining maximum endurance times for static muscular work, International Journal of Industrial Ergonomics, vol.36, issue.2, pp.99-108, 2006.
DOI : 10.1016/j.ergon.2005.08.003

E. Mouayni, I. Etienne, A. Siadat, A. Dantan, J. Lux et al., A simulation based approach for enhancing health aspects in production systems by integrating work margins. IFAC-Pap, 8th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2016Troyes, pp.1697-1702, 2016.

K. Ellegard, The Development of a Reflective Production System Layout at Volvo???s Uddevalla Car Assembly Plant, pp.189-208, 1997.
DOI : 10.1007/978-3-642-60374-7_15

W. H. Elmaraghy, O. A. Nada, and H. A. Elmaraghy, Quality prediction for reconfigurable manufacturing systems via human error modelling, International Journal of Computer Integrated Manufacturing, vol.51, issue.5, 2008.
DOI : 10.1016/S0169-8141(00)00004-4

T. Engström, D. Jonsson, and L. Medbo, The Volvo Uddevalla Plant: Production Principles, Work Organization, Human Resources and Performance Aspects. Some results from decade's efforts toward reformation of assembly work (Report), 1996.

E. Mathiassen, S. Åhsberg, and E. , Prediction of shoulder flexion endurance from personal factors, International Journal of Industrial Ergonomics, vol.24, issue.3, pp.315-329, 1999.
DOI : 10.1016/S0169-8141(98)00039-0

R. Farmer and N. D. Sundberg, Boredom Proneness--The Development and Correlates of a New Scale, Journal of Personality Assessment, vol.23, issue.1, pp.4-17, 1986.
DOI : 10.1037//0022-006X.46.3.423

T. A. Feo and M. G. Resende, Greedy Randomized Adaptive Search Procedures, Journal of Global Optimization, vol.68, issue.2, pp.109-133, 1995.
DOI : 10.1002/j.1538-7305.1989.tb00322.x

C. D. Fisherl, Boredom at Work: A Neglected Concept, Human Relations, vol.28, issue.7, pp.395-417, 1993.
DOI : 10.1037/h0040995

E. A. Fleishman, Performance Assessment Based on an Empirically Derived Task Taxonomy, Human Factors: The Journal of the Human Factors and Ergonomics Society, vol.45, issue.4, pp.349-366, 1967.
DOI : 10.1037/h0046366

T. Fujimoto, The Evolution of a Manufacturing System at Toyota, 1999.

B. Gall and W. Parkhouse, Changes in physical capacity as a function of age in heavy manual work, Ergonomics, vol.17, issue.6, pp.671-687, 2004.
DOI : 10.5271/sjweh.1686

S. Galland, F. Grimaud, P. Beaune, and J. Campagne, Multi-agent methodological approach for distributed simulation, 11th European Simulation Symposium. p, p.104, 1999.
URL : https://hal.archives-ouvertes.fr/emse-00720930

A. M. Game, Workplace boredom coping: health, safety, and HR implications, Personnel Review, vol.36, issue.5, pp.701-721, 2007.
DOI : 10.1111/j.2044-8295.1985.tb01946.x

A. Garg, D. B. Chaffin, and G. D. Herrin, Prediction of metabolic rates for manual materials handling jobs, American Industrial Hygiene Association Journal, vol.39, issue.8, pp.661-674, 1978.
DOI : 10.1080/0002889778507831

A. Garg, K. T. Hegmann, B. J. Schwoerer, and J. M. Kapellusch, The effect of maximum voluntary contraction on endurance times for the shoulder girdle, International Journal of Industrial Ergonomics, vol.30, issue.2, pp.103-113, 2002.
DOI : 10.1016/S0169-8141(02)00078-1

D. Gartman, Auto Slavery: The Labor Process in the American Automobile Industry, pp.1897-1950, 1986.

A. M. Genaidy, A. Mital, and M. Obeidat, The validity of predetermined motion time systems in setting production standards for industrial tasks, International Journal of Industrial Ergonomics, vol.3, issue.3, pp.249-263, 1989.
DOI : 10.1016/0169-8141(89)90025-5

J. S. Gero and U. Kannengiesser, The situated function???behaviour???structure framework, Design Studies, vol.25, issue.4, pp.373-391, 2004.
DOI : 10.1016/j.destud.2003.10.010

Z. S. Givi, M. Y. Jaber, and W. P. Neumann, Modelling worker reliability with learning and fatigue, Applied Mathematical Modelling, vol.39, issue.17, pp.5186-5199, 2015.
DOI : 10.1016/j.apm.2015.03.038

F. Glover and G. A. Kochenberger, Handbook of Metaheuristics, 2003.
DOI : 10.1007/b101874

R. L. Goldich, Military Retirement and Personnel Management: Should Active Duty Military Careers be Lengthened?, 1995.

L. Graham, On the Line at Subaru-isuzu: The Japanese Model and the American Worker, 1 edition, 1995.

J. R. Hackman and E. E. Lawler, Employee reactions to job characteristics., Journal of Applied Psychology, vol.55, issue.3, p.259, 1971.
DOI : 10.1037/h0031152

R. B. Handfield, A resource dependence perspective of Just-in-Time purchasing, Journal of Operations Management, vol.11, issue.3, pp.289-311, 1993.
DOI : 10.1016/0272-6963(93)90005-A

R. L. Harmon and L. D. Peterson, Reinventing the factory: productivity breakthroughs in manufacturing today, 1990.

G. W. Heath, J. M. Hagberg, A. A. Ehsani, and J. O. Holloszy, A physiological comparison of young and older endurance athletes, Journal of Applied Physiology, vol.51, issue.3, pp.634-640, 1981.
DOI : 10.1152/jappl.1981.51.3.634

S. Hignett and L. Mcatamney, Rapid Entire Body Assessment (REBA), Applied Ergonomics, vol.31, issue.2, pp.201-205, 2000.
DOI : 10.1016/S0003-6870(99)00039-3

K. K. Hon, Performance and Evaluation of Manufacturing Systems, CIRP Annals, vol.54, issue.2, pp.139-154, 2005.
DOI : 10.1016/S0007-8506(07)60023-7

W. E. Hoogendoorn, M. N. Van-poppel, P. M. Bongers, B. W. Koes, and L. M. Bouter, Systematic Review of Psychosocial Factors at Work and Private Life as Risk Factors for Back Pain, Spine, vol.25, issue.16, pp.2114-2125, 2000.
DOI : 10.1097/00007632-200008150-00017

W. J. Hopp and M. L. Spearman, Factory physics: foundations of manufacturing management, 2, 2001.

D. Hounshell, From the American System to Mass Production, 1800-1932: The Development of Manufacturing Technology in the United States, 1985.

M. Y. Jaber and M. Bonney, A comparative study of learning curves with forgetting, Applied Mathematical Modelling, vol.21, issue.8, pp.523-531, 1997.
DOI : 10.1016/S0307-904X(97)00055-3

M. Y. Jaber, Z. S. Givi, and W. P. Neumann, Incorporating human fatigue and recovery into the learning???forgetting process, Applied Mathematical Modelling, vol.37, issue.12-13, pp.7287-7299, 2013.
DOI : 10.1016/j.apm.2013.02.028

J. R. Jackson, A Computing Procedure for a Line Balancing Problem, Management Science, vol.2, issue.3, pp.261-271, 1956.
DOI : 10.1287/mnsc.2.3.261

G. Kanawaty, International Labour Office, 1992. Introduction to work study

O. Karhu, P. Kansi, and I. Kuorinka, Correcting working postures in industry: A practical method for analysis, Applied Ergonomics, vol.8, issue.4, pp.199-201, 1977.
DOI : 10.1016/0003-6870(77)90164-8

W. Karwowski, International Encyclopedia of Ergonomics and Human Factors, Second Edition -3 Volume Set, 2006.
DOI : 10.1201/9780849375477

M. Kenney and R. L. Florida, Beyond mass production: the Japanese system and its transfer to the U.S, 1993.

G. P. Kenny, J. E. Yardley, L. Martineau, and O. Jay, Physical work capacity in older adults: Implications for the aging worker, American Journal of Industrial Medicine, vol.19, issue.1, pp.610-625, 2008.
DOI : 10.1152/japplphysiol.00320.2003

B. Kirwan, The validation of three human reliability quantification techniques ??? THERP, HEART and JHEDI: Part 1 ??? technique descriptions and validation issues, Applied Ergonomics, vol.27, issue.6, 1996.
DOI : 10.1016/S0003-6870(96)00044-0

T. Koukoulaki, The impact of lean production on musculoskeletal and psychosocial risks: An examination of sociotechnical trends over 20 years, Applied Ergonomics, vol.45, issue.2, pp.198-212, 2014.
DOI : 10.1016/j.apergo.2013.07.018

K. M. Kowalski-trakofler, L. J. Steiner, and D. J. Schwerha, Safety considerations for the aging workforce, Safety Science, vol.43, issue.10, pp.779-793, 2005.
DOI : 10.1016/j.ssci.2005.08.014

J. J. Krafcik, Triumph of the Lean¨ProductionLean¨Production System, Sloan Management Review, vol.30, pp.41-52, 1988.

J. B. Lanfranchi and A. Duveau, Explicative models of musculoskeletal disorders (MSD): From biomechanical and psychosocial factors to clinical analysis of ergonomics, Revue Europ??enne de Psychologie Appliqu??e/European Review of Applied Psychology, vol.58, issue.4, pp.201-213, 2008.
DOI : 10.1016/j.erap.2008.09.004

G. P. Latham and E. A. Locke, Self-regulation through goal setting, Organizational Behavior and Human Decision Processes, vol.50, issue.2, pp.212-247, 1991.
DOI : 10.1016/0749-5978(91)90021-K

L. Moigne and J. , La théorie du système général: théorie de la modélisation, 1994.

S. J. Linton, Occupational psychological factors increase the risk for back pain: a systematic review, Journal of Occupational Rehabilitation, vol.11, issue.1, pp.53-66, 2001.
DOI : 10.1023/A:1016656225318

L. Ma, W. Zhang, S. Wu, and Z. Zhang, A new simple local muscle recovery model and its theoretical and experimental validation, International Journal of Occupational Safety and Ergonomics, vol.89, issue.4, pp.86-93, 2015.
DOI : 10.1016/j.ergon.2008.04.004

L. Mcatamney and E. N. Corlett, RULA: a survey method for the investigation of work-related upper limb disorders, Applied Ergonomics, vol.24, issue.2, pp.91-99, 1993.
DOI : 10.1016/0003-6870(93)90080-S

S. Mckenzie, Rise of the robots: The evolution of Ford's assembly line [WWW Document]. CNNMoney. URL http://money.cnn.com/gallery/technology, 2015.

M. W. Meyer, Rethinking performance measurement: beyond the balanced scorecard, 2002.
DOI : 10.1017/CBO9780511753824

G. Michalos, S. Makris, and G. Chryssolouris, The effect of job rotation during assembly on the quality of final product, CIRP Journal of Manufacturing Science and Technology, vol.6, issue.3, pp.187-197, 2013.
DOI : 10.1016/j.cirpj.2013.03.001

M. Milano and A. Roli, MAGMA: A Multiagent Architecture for Metaheuristics, IEEE Transactions on Systems, Man and Cybernetics, Part B (Cybernetics), vol.34, issue.2, pp.925-941, 2004.
DOI : 10.1109/TSMCB.2003.818432

R. Milkman, Farewell to the Factory: Auto Workers in the Late Twentieth Century, 1997.

Y. Monden, Toyota Production System: An Integrated Approach to Just-In-Time, 2011.
DOI : 10.1007/978-1-4615-9714-8

H. Monod, J. Scherrer, . The, . Work, . Of et al., THE WORK CAPACITY OF A SYNERGIC MUSCULAR GROUP, Ergonomics, vol.18, issue.3, pp.329-338, 1965.
DOI : 10.1080/00140136008930462

L. Monostori, Cyber-physical Production Systems: Roots, Expectations and R&D Challenges, Procedia CIRP, vol.17, pp.9-13, 2014.
DOI : 10.1016/j.procir.2014.03.115

K. F. Murrell, Human Performance in Industry, 1965.

R. E. Nance, The Conical Methodology and the evolution of simulation model development, Annals of Operations Research, vol.2, issue.1, pp.1-45, 1994.
DOI : 10.1287/ijoc.1.2.107

A. Naseer, T. Eldabi, and M. Jahangirian, Cross???sector analysis of simulation methods: a survey of defense and healthcare, Transforming Government: People, Process and Policy, vol.3, issue.2, pp.181-189, 2009.
DOI : 10.1136/bmj.328.7432.162

C. National-research, Institue of Medicine Musculoskeletal Disorders and the Workplace: Low Back and Upper Extremities, 2001.

A. Neely, Business Performance Measurement: Unifying Theory and Integrating Practice, 2007.
DOI : 10.1017/CBO9780511488481

A. Negahban and J. S. Smith, Simulation for manufacturing system design and operation: Literature review and analysis, Journal of Manufacturing Systems, vol.33, issue.2, pp.241-261, 2014.
DOI : 10.1016/j.jmsy.2013.12.007

A. Negahban and L. Yilmaz, Agent-based simulation applications in marketing research: an integrated review, Journal of Simulation, vol.1, issue.2, pp.129-142, 2014.
DOI : 10.1016/j.jbusres.2007.02.006

A. Neto, P. Ramalho, E. Vila, and G. Filho, A simulation-based evolutionary multiobjective approach to manufacturing cell formation, Computers & Industrial Engineering, vol.59, issue.1, pp.64-74, 2010.
DOI : 10.1016/j.cie.2010.02.017

D. K. Pace, Ideas about simulation conceptual model development, Johns Hopkins APL Tech. Dig, vol.21, pp.327-336, 2000.

J. Perez, M. P. De-looze, T. Bosch, and W. P. Neumann, Discrete event simulation as an ergonomic tool to predict workload exposures during systems design, International Journal of Industrial Ergonomics, vol.44, issue.2, pp.298-306, 2014.
DOI : 10.1016/j.ergon.2013.04.007

M. Pidd, Computer Simulation in Management Science, 5 edition, 2004.

M. Queyranne, Bounds for Assembly Line Balancing Heuristics, Operations Research, vol.33, issue.6, pp.1353-1359, 1985.
DOI : 10.1287/opre.33.6.1353

A. Raouf and M. Ben-daya, Flexible manufacturing systems: recent developments, Manufacturing research and technology, 1995.

B. Rekiek and A. Delchambre, Assembly line design: the balancing of mixed-model hybrid assembly lines with genetic algorithms, Springer series in advanced manufacturing, 2006.

J. Rinehart, C. Huxley, and D. Robertson, Just Another Car Factory?: Lean Production and Its Discontents, 1997.

S. Robinson, Conceptual modeling for discrete-event simulation, A Chapman & Hall book, 2011.

S. Robinson, Conceptual Modeling for Simulation: Issues and Research Requirements, Proceedings of the 2006 Winter Simulation Conference, pp.792-800, 2006.
DOI : 10.1109/WSC.2006.323160

S. Robinson, R. Brooks, K. Kotiadis, and D. V. Zee, Conceptual Modeling for Discrete- Event Simulation, 2010.
DOI : 10.1201/9781439810385

G. Rodde, Les systèmes de production: Modélisation et performances, Hermes Sciences Publicat, 1989.

W. Rohmert, Ermittlung von Erholungspausen für statische Arbeit des Menschen, 1960.

J. E. Rooda and J. Vervoort, Analysis of manufacturing systems, Univ. Technol. Eindh. Eindh, 2007.

L. Rose, M. Ericson, and R. Ortengren, Endurance time, pain and resumption in passive loading of the elbow joint, Ergonomics, vol.13, issue.3, pp.405-420, 2000.
DOI : 10.1016/0169-8141(92)90051-Z

N. Ruiz, A. Giret, V. Botti, and V. Feria, An intelligent simulation environment for manufacturing systems, Computers & Industrial Engineering, vol.76, pp.148-168, 2014.
DOI : 10.1016/j.cie.2014.06.013

H. Sato, J. Ohashi, K. Iwanaga, R. Yoshitake, and K. Shimada, Endurance time and fatigue in static contractions, J. Hum. Ergol. (Tokyo), vol.13, pp.147-154, 1984.

A. Scholl and C. Becker, State-of-the-art exact and heuristic solution procedures for simple assembly line balancing, European Journal of Operational Research, vol.168, issue.3, pp.666-693, 2006.
DOI : 10.1016/j.ejor.2004.07.022

A. Scholl and S. Voss, Simple assembly line balancing?Heuristic approaches, Journal of Heuristics, vol.32, issue.3, pp.217-244, 1997.
DOI : 10.1007/978-3-642-78910-6_64

R. Schonberger, Japanese Manufacturing Techniques: Nine Hidden Lessons in Simplicity, 1982.

W. Shen, Q. Hao, H. J. Yoon, and D. H. Norrie, Applications of agent-based systems in intelligent manufacturing: An updated review, Advanced Engineering Informatics, vol.20, issue.4, pp.415-431, 2006.
DOI : 10.1016/j.aei.2006.05.004

R. J. Shephard, Age and Physical Work Capacity, Experimental Aging Research, vol.27, issue.4, pp.331-343, 1999.
DOI : 10.1249/00005768-199506000-00017

A. Smith and A. B. Krueger, Wealth of Nations, 2003.
DOI : 10.1002/9781118011690.ch9

S. Spencer and S. M. , Competence at Work: Models for Superior Performance, 1 edition, 1993.

J. D. Steinbruner, The Cybernetic Theory of Decision: New Dimensions of Political Analysis, 2002.

T. Stützle, Iterated local search for the quadratic assignment problem, European Journal of Operational Research, vol.174, issue.3, pp.1519-1539, 2006.
DOI : 10.1016/j.ejor.2005.01.066

F. W. Taylor, The Principles of Scientific Management, 1998.

S. Terzi and S. Cavalieri, Simulation in the supply chain context: a survey, Computers in Industry, vol.53, issue.1, pp.3-16, 2004.
DOI : 10.1016/S0166-3615(03)00104-0

P. Tolin and J. R. Simon, Effect of Task Complexity and Stimulus Duration on Perceptual-Motor Performance of Two Disparate Age Groups, Ergonomics, vol.5, issue.3, pp.283-290, 1968.
DOI : 10.1080/00140136008930484

S. Treville and J. Antonakis, Could lean production job design be intrinsically motivating? Contextual, configurational, and levels-of-analysis issues, Journal of Operations Management, vol.24, issue.2, pp.99-123, 2006.
DOI : 10.1016/j.jom.2005.04.001

S. D. Treville, Disruption, Learning, and System Improvement in Just-in-time Manufacturing, Helsinki School of Economics and Business Administration, 1987.

S. Tuncel, A. Genaidy, R. Shell, S. Salem, W. Karwowski et al., Research to practice: Effectiveness of controlled workplace interventions to reduce musculoskeletal disorders in the manufacturing environment???critical appraisal and meta-analysis, Human Factors and Ergonomics in Manufacturing, vol.32, issue.2, pp.93-124, 2008.
DOI : 10.1080/1047322X.1995.10389068

D. A. Van-der-windt, E. Thomas, D. P. Pope, A. F. De-winter, G. J. Macfarlane et al., Occupational risk factors for shoulder pain: a systematic review, Occupational and Environmental Medicine, vol.57, issue.7, pp.433-442, 2000.
DOI : 10.1136/oem.57.7.433

D. Vasiljevic, Z. Trkulja, and M. Danilovic, Towards an extended set of production line performance indicators, Total Quality Management & Business Excellence, vol.18, issue.2, pp.618-634, 2014.
DOI : 10.1016/j.ijpe.2007.02.008

N. Vézina, La pratique de l'ergonomie face aux TMS: ouverture à l'interdisciplinarité, Comptes Rendus Congrès SELF-ACE, 2001.

J. T. Viitasalo, P. Era, A. Leskinen, and E. Heikkinen, Muscular strength profiles and anthropometry in random samples of men aged 31?35, Ergonomics, vol.28, pp.51-55, 1985.

C. A. Voss, Operations management?from Taylor to Toyota?and beyond? Br, J. Manag, vol.6, pp.17-29, 1995.

R. C. Walleigh, What's Your Excuse for Not Using JIT? [WWW Document] URL https://hbr.org/1986/03/whats-your-excuse-for-not-using-jit, Harv. Bus. Rev, 1986.

U. Wemmerlov and D. J. Johnson, Cellular manufacturing at 46 user plants: Implementation experiences and performance improvements, International Journal of Production Research, vol.35, issue.1, pp.29-49, 1997.
DOI : 10.1080/002075497195966

D. E. Whitney, Mechanical assemblies: their design, manufacture, and role in product development, Oxford series on advanced manufacturing, 2004.

T. P. Wright, Factors Affecting the Cost of Airplanes, Journal of the Aeronautical Sciences, vol.3, issue.4, pp.122-128, 1936.
DOI : 10.2514/8.155

Z. Xu, J. Ko, D. J. Cochran, and M. Jung, Design of assembly lines with the concurrent consideration of productivity and upper extremity musculoskeletal disorders using linear models, Computers & Industrial Engineering, vol.62, issue.2, pp.431-441, 2012.
DOI : 10.1016/j.cie.2011.10.008

S. Yoon, J. Ko, and M. Jung, A model for developing job rotation schedules that eliminate sequential high workloads and minimize between-worker variability in cumulative daily workloads: Application to automotive assembly lines, Applied Ergonomics, vol.55, pp.8-15, 2016.
DOI : 10.1016/j.apergo.2016.01.011

K. B. Zandin, MOST Work Measurement Systems, 2002.

B. P. Zeigler, Object-oriented simulation with hierarchical, modular models: intelligent agents and endomorphic systems, 2. print, 1991.

B. P. Zeigler, H. Praehofer, and T. G. Kim, Theory of Modeling and Simulation: Integrating Discrete Event and Continuous Complex Dynamic Systems, 2000.

X. Zhang, L. Schmidt, C. M. Schlick, R. Reuth, and H. Luczak, A human task-oriented simulation study in autonomous production cells, International Journal of Production Research, vol.52, issue.18, pp.5013-5041, 2008.
DOI : 10.1109/WSC.2000.899741