J. Béard, J. Billette, P. Frings, M. Suleiman, and F. Lecouturier, Special Coils Development at the National High Magnetic Field Laboratory in Toulouse, Journal of Low Temperature Physics, vol.22, issue.3, pp.442-446, 2013.
DOI : 10.1109/TASC.2011.2175189

R. National and . Council, High Magnetic Field Science and Its Application in the United States : Current Status and Future Directions, 2013.

L. Frydman, High magnetic field science and its application in the United States: A magnetic resonance perspective, Journal of Magnetic Resonance, vol.242, pp.256-264, 2014.
DOI : 10.1016/j.jmr.2014.01.013

L. Thilly and F. Lecouturier, Les nanosciences 2 : Nanomatériaux et nanochimie, chapter Applications des nanomatériaux : mécanique : bobines hauts champs, Ed. Belin, coll. Echelles, pp.650-658, 2006.

L. Thilly, Exploration théorique et expérimentale de fils nanocomposites continus présentant des propriétés extrêmes de conductivité electrique et de limité elastique, 2000.

J. B. Dubois, L. Thilly, P. Renault, and F. Lecouturier, Cu-Nb Nanocomposite Wires Processed by Severe Plastic Deformation: Effects of the Multi-Scale Microstructure and Internal Stresses on Elastic-Plastic Properties, Advanced Engineering Materials, vol.58, issue.3, pp.998-1003, 2012.
DOI : 10.1016/j.actamat.2010.06.026

J. B. Dubois, Conducteurs nanocomposites métalliques métalliquesélaborés par déformation plastique sévère : formation et stabilité thermo-mécanique des nanostructures, propriétés induites, 2010.

K. Spencer, F. Lecouturier, L. Thilly, and J. D. Embury, Established and Emerging Materials for use as High-Field Magnet Conductors, Advanced Engineering Materials, vol.6, issue.5, pp.290-297, 2004.
DOI : 10.1002/adem.200400014
URL : https://hal.archives-ouvertes.fr/hal-00015865

L. Thilly, F. Lecouturier, and J. V. Stebut, Size-induced enhanced mechanical properties of nanocomposite copper/niobium wires: nanoindentation study, Acta Materialia, vol.50, issue.20, pp.5049-5065, 2002.
DOI : 10.1016/S1359-6454(02)00351-8
URL : https://hal.archives-ouvertes.fr/hal-00015673

V. Vidal, L. Thilly, F. Lecouturier, and P. Renault, Cu nanowhiskers embedded in Nb nanotubes inside a multiscale Cu matrix: The way to reach extreme mechanical properties in high strength conductors, Scripta Materialia, vol.57, issue.3, pp.245-248, 2007.
DOI : 10.1016/j.scriptamat.2007.04.001
URL : https://hal.archives-ouvertes.fr/hal-00203137

J. B. Dubois, L. Thilly, P. Renault, F. Lecouturier, and M. D. Michiel, Thermal stability of nanocomposite metals: In situ observation of anomalous residual stress relaxation during annealing under synchrotron radiation, Acta Materialia, vol.58, issue.19, pp.6504-6512, 2010.
DOI : 10.1016/j.actamat.2010.08.013

M. J. Demkowicz and L. Thilly, Structure, shear resistance and interaction with point defects of interfaces in Cu???Nb nanocomposites synthesized by severe plastic deformation, Acta Materialia, vol.59, issue.20, pp.7744-7756, 2011.
DOI : 10.1016/j.actamat.2011.09.004

L. Thilly, S. Van-petegem, P. Renault, F. Lecouturier, V. Vidal et al., A new criterion for elasto-plastic transition in nanomaterials: Application to size and composite effects on Cu???Nb nanocomposite wires, Acta Materialia, vol.57, issue.11, pp.3157-3169, 2009.
DOI : 10.1016/j.actamat.2009.03.021

Z. Hashin, D. Bagchi, and B. W. Rosen, Non-linear behavior of fiber composite laminates, NASA (NASA-CR-1974), 1974.

E. Hervé, A. Zaoui-]-e, A. Hervé, S. Zaoui, E. Joannes et al., Multiscale modeling of transport phenomena for materials with n-layered embedded fibres : an analytical and numerical-based approach, Int. J. Eng. Sci. Int. J. Eng. Sci, vol.33, pp.31-32, 1993.

J. Besson, G. Cailletaud, J. Chaboche, and S. Forest, Nonlinear mechanics of materials, 2009.

T. Kanit, S. Forest, I. Galliet, V. Mounoury, and D. Jeulin, Determination of the size of the representative volume element for random composites: statistical and numerical approach, International Journal of Solids and Structures, vol.40, issue.13-14, pp.3647-3679, 2003.
DOI : 10.1016/S0020-7683(03)00143-4

R. M. Christensen and K. H. Lo, Solutions for effective shear properties in three phase sphere and cylinder models, Journal of the Mechanics and Physics of Solids, vol.27, issue.4, pp.315-330, 1979.
DOI : 10.1016/0022-5096(79)90032-2

E. Hervé, Thermal and thermoelastic behaviour of multiply coated inclusion-reinforced composites, International Journal of Solids and Structures, vol.39, issue.4, pp.1041-1058, 2002.
DOI : 10.1016/S0020-7683(01)00257-8

R. B. Dingle, The Electrical Conductivity of Thin Wires, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.201, issue.1067, pp.545-560, 1950.
DOI : 10.1098/rspa.1950.0077

N. W. Ashcroft and N. D. Mermin, Solid state physics (saunders college, 1976.

G. Ausias, S. Thuillier, B. Omnes, S. Wiessner, and P. Pilvin, Micromechanical model of TPE made of polypropylene and rubber waste, Polymer, issue.11, pp.483367-3376, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00399246

G. Badinier, C. Sinclair, S. Allain, and O. Bouaziz, The Bauschinger effect in drawn and annealed nanocomposite Cu???Nb wires, Materials Science and Engineering: A, vol.597, pp.10-19, 2014.
DOI : 10.1016/j.msea.2013.12.031
URL : https://hal.archives-ouvertes.fr/hal-01293579

F. Barbe, L. Decker, D. Jeulin, C. , and G. , Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: F.E. model, International Journal of Plasticity, vol.17, issue.4, pp.513-536, 2001.
DOI : 10.1016/S0749-6419(00)00061-9

F. Barbe, S. Forest, C. , and G. , Intergranular and intragranular behavior of polycrystalline aggregates.Part 2: Results, International Journal of Plasticity, vol.17, issue.4, pp.537-563, 2001.
DOI : 10.1016/S0749-6419(00)00062-0

G. Batchelor, Transport Properties of Two-Phase Materials with Random Structure, Annual Review of Fluid Mechanics, vol.6, issue.1, pp.227-255, 1974.
DOI : 10.1146/annurev.fl.06.010174.001303

T. Behzad and M. Sain, Measurement and prediction of thermal conductivity for hemp fiber reinforced composites, Polymer Engineering & Science, vol.125, issue.277, pp.47977-983, 2007.
DOI : 10.1016/S0921-5093(02)00166-1

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, pp.5-6325, 1978.
DOI : 10.1016/0022-5096(78)90003-0

J. Besson, G. Cailletaud, J. Chaboche, and S. Forest, Non-linear mechanics of materials, 2009.
DOI : 10.1007/978-90-481-3356-7

S. Beurthey and A. Zaoui, Structural morphology and relaxation spectra of viscoelastic heterogeneous materials, European Journal of Mechanics - A/Solids, vol.19, issue.1, pp.1-16, 2000.
DOI : 10.1016/S0997-7538(00)00157-1
URL : https://hal.archives-ouvertes.fr/hal-00111287

T. Böhlke, F. Fritzen, K. Joechen, and R. Tsotsova, Numerical methods for the quantification of the mechanical properties of crystal aggregateswith morphologic and crystallographic texture, International Journal of Material Forming, vol.17, issue.12, pp.915-917, 2009.
DOI : 10.1016/S0749-6419(00)00061-9

T. Böhlke, K. Jöchen, O. Kraft, D. Löhe, and V. Schulze, Elastic properties of polycrystalline microcomponents, Mechanics of Materials, vol.42, issue.1, pp.11-23, 2010.
DOI : 10.1016/j.mechmat.2009.08.007

R. Brenner, O. Castelnau, and L. Badea, Mechanical field fluctuations in polycrystals estimated by homogenization techniques, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.460, issue.2052, pp.4603589-3612, 2004.
DOI : 10.1098/rspa.2004.1278

B. Budiansky, On the elastic moduli of some heterogeneous materials, Journal of the Mechanics and Physics of Solids, vol.13, issue.4, pp.223-227, 1965.
DOI : 10.1016/0022-5096(65)90011-6

G. Cailletaud, A micromechanical approach to inelastic behaviour of metals, International Journal of Plasticity, vol.8, issue.1, pp.55-73, 1992.
DOI : 10.1016/0749-6419(92)90038-E

G. Cailletaud, S. Forest, D. Jeulin, F. Feyel, I. Galliet et al., Some elements of microstructural mechanics, Computational Materials Science, vol.27, issue.3, pp.351-374, 2003.
DOI : 10.1016/S0927-0256(03)00041-7

S. Caré and E. Hervé, Application of a n-Phase Model to the Diffusion Coefficient of Chloride in Mortar, Transport in Porous Media, pp.119-135, 2004.
DOI : 10.1023/B:TIPM.0000021730.34756.40

K. Carroll, Elastic Constants of Niobium from 4.2?? to 300??K, Journal of Applied Physics, vol.36, issue.11, pp.3689-3690, 1965.
DOI : 10.1103/PhysRev.130.1324

O. Castelnau, O. Thomas, A. Ponchet, and S. Forest, Mechanical behavior of polycrystalline materials, Mechanics of Nano-objects, chapter 5, pp.301-322, 2011.

J. Chan, Four-point probe manual, 1994.

R. Christensen and K. Lo, Solutions for effective shear properties in three phase sphere and cylinder models, Journal of the Mechanics and Physics of Solids, vol.27, issue.4, pp.315-330, 1979.
DOI : 10.1016/0022-5096(79)90032-2

F. Coudon, G. Cailletaud, and J. Cormier, Mean-field modeling of the anisotropic behavior of directionally solidified superalloys In preparation for, International Journal of Plasticity, 2017.

B. Devincre, T. Hoc, and L. Kubin, Dislocation Mean Free Paths and Strain Hardening of Crystals, Science, vol.483484, issue.5775, pp.3201745-1748, 2008.
DOI : 10.1126/science.1125799

R. Dingle, The Electrical Conductivity of Thin Wires, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, pp.545-560, 1950.
DOI : 10.1098/rspa.1950.0077

I. Doghri, L. Brassart, L. Adam, and J. Gérard, A second-moment incremental formulation for the mean-field homogenization of elasto-plastic composites, International Journal of Plasticity, vol.27, issue.3, pp.352-371, 2011.
DOI : 10.1016/j.ijplas.2010.06.004

J. Dubois, Conducteurs nanocomposites métalliquesmétalliquesélaborés par déformation plastique sévère : formation et stabilité thermo-mécanique des nanostructures, propriétés induites, 2010.

J. Dubois, L. Thilly, P. Renault, and F. Lecouturier, Cu-Nb Nanocomposite Wires Processed by Severe Plastic Deformation: Effects of the Multi-Scale Microstructure and Internal Stresses on Elastic-Plastic Properties, Advanced Engineering Materials, vol.58, issue.3, pp.14998-1003, 2012.
DOI : 10.1016/j.actamat.2010.06.026

J. Dubois, L. Thilly, P. Renault, F. Lecouturier, D. Michiel et al., Thermal stability of nanocomposite metals: In situ observation of anomalous residual stress relaxation during annealing under synchrotron radiation, Acta Materialia, vol.58, issue.19, pp.586504-6512, 2010.
DOI : 10.1016/j.actamat.2010.08.013

F. Dupouy, S. Askenazy, J. Peyrade, and D. Legat, Composite conductors for high pulsed magnetic fields, Physica B: Condensed Matter, vol.211, issue.1-4, pp.43-45, 1995.
DOI : 10.1016/0921-4526(94)00934-N

S. Epstein and O. Carlson, The elastic constants of nickel-copper alloy single crystals, Acta Metallurgica, vol.13, issue.5, pp.487-491, 1965.
DOI : 10.1016/0001-6160(65)90098-2

J. D. Eshelby, The determination of the elastic field of an ellipsoidal inclusion, and related problems, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, pp.376-396, 1957.

F. Feyel and J. Chaboche, FE2 multiscale approach for modelling the elastoviscoplastic behaviour of long fibre SiC/Ti composite materials, Computer Methods in Applied Mechanics and Engineering, vol.183, issue.3-4, pp.309-330, 2000.
DOI : 10.1016/S0045-7825(99)00224-8

J. Flaquer, A. Ríos, A. Martín-meizoso, S. Nogales, and H. Böhm, Effect of diamond shapes and associated thermal boundary resistance on thermal conductivity of diamond-based composites, Computational Materials Science, vol.41, issue.2, pp.41156-163, 2007.
DOI : 10.1016/j.commatsci.2007.03.016

S. Forest and P. Pilvin, Modelling the Cyclic Behaviour of Two-Phase Single Crystal Nickel-Base Superalloys, IUTAM Symposium on micromechanics of plasticity and damage of multiphase materials, pp.51-58, 1996.
DOI : 10.1007/978-94-009-1756-9_7

P. Franciosi and S. Berbenni, Multi-laminate plastic-strain organization for non-uniform TFA modeling of poly-crystal regularized plastic flow, International Journal of Plasticity, vol.24, issue.9, pp.1549-1580, 2008.
DOI : 10.1016/j.ijplas.2007.12.004

D. François, A. Pineau, A. Zaoui, A. Zaoui, A. Zaoui et al., Mechanical behaviour of materials, 1998.

F. Fritzen and T. Böhlke, Nonuniform transformation field analysis of materials with morphological anisotropy, Composites Science and Technology, vol.71, issue.4, pp.433-442, 2011.
DOI : 10.1016/j.compscitech.2010.12.013
URL : https://hal.archives-ouvertes.fr/hal-00723639

F. Fritzen, T. Böhlke, and E. Schnack, Periodic three-dimensional mesh generation for crystalline aggregates based on Voronoi tessellations, Computational Mechanics, vol.193, issue.7, pp.701-713, 2009.
DOI : 10.1007/978-3-540-32360-0

K. Fuchs, The conductivity of thin metallic films according to the electron theory of metals, Mathematical Proceedings of the Cambridge Philosophical Society, pp.100-108, 1938.
DOI : 10.1017/S0305004100019952

M. G. Geers, V. G. Kouznetsova, and W. Brekelmans, Multi-scale computational homogenization: Trends and challenges, Journal of Computational and Applied Mathematics, vol.234, issue.7, pp.2175-2182, 2010.
DOI : 10.1016/j.cam.2009.08.077
URL : https://doi.org/10.1016/j.cam.2009.08.077

C. Gérard, Mesures de champs et identification de modèles de plasticité cristalline, 2008.

S. Ghosh, K. Lee, and S. Moorthy, Multiple scale analysis of heterogeneous elastic structures using homogenization theory and voronoi cell finite element method, International Journal of Solids and Structures, vol.32, issue.1, pp.27-62, 1995.
DOI : 10.1016/0020-7683(94)00097-G

S. Ghosh, K. Lee, and S. Moorthy, Two scale analysis of heterogeneous elastic-plastic materials with asymptotic homogenization and Voronoi cell finite element model, Computer Methods in Applied Mechanics and Engineering, vol.132, issue.1-2, pp.63-116, 1996.
DOI : 10.1016/0045-7825(95)00974-4

S. Groh, E. Marin, M. Horstemeyer, and H. Zbib, Multiscale modeling of the plasticity in an aluminum single crystal, International Journal of Plasticity, vol.25, issue.8, pp.251456-1473, 2009.
DOI : 10.1016/j.ijplas.2008.11.003

T. Gu, O. Castelnau, S. Forest, E. Hervé-luanco, F. Lecouturier et al., Multiscale modeling of the elastic behavior of architectured and nanostructured Cu???Nb composite wires, International Journal of Solids and Structures, vol.121, pp.148-162, 2017.
DOI : 10.1016/j.ijsolstr.2017.05.022
URL : https://hal.archives-ouvertes.fr/hal-01638339

H. Haddadi, S. Bouvier, M. Banu, C. Maier, and C. Teodosiu, Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: Modelling, numerical analysis and identification, International Journal of Plasticity, vol.22, issue.12, pp.222226-2271, 2006.
DOI : 10.1016/j.ijplas.2006.03.010

B. Hansen, J. Carpenter, S. Sintay, C. Bronkhorst, R. Mccabe et al., Modeling the texture evolution of Cu/Nb layered composites during rolling, International Journal of Plasticity, vol.49, pp.71-84, 2013.
DOI : 10.1016/j.ijplas.2013.03.001

Z. Hashin, The Elastic Moduli of Heterogeneous Materials, Journal of Applied Mechanics, vol.29, issue.1, pp.143-150, 1962.
DOI : 10.1115/1.3636446

Z. Hashin, Thin interphase/imperfect interface in elasticity with application to coated fiber composites, Journal of the Mechanics and Physics of Solids, vol.50, issue.12, pp.2509-2537, 2002.
DOI : 10.1016/S0022-5096(02)00050-9

Z. Hashin and B. W. Rosen, The Elastic Moduli of Fiber-Reinforced Materials, Journal of Applied Mechanics, vol.31, issue.2, pp.31223-232, 1964.
DOI : 10.1115/1.3629590

D. Hasselman and L. F. Johnson, Effective Thermal Conductivity of Composites with Interfacial Thermal Barrier Resistance, Journal of Composite Materials, vol.31, issue.6, pp.508-515, 1987.
DOI : 10.1063/1.1735816

F. Heringhaus, H. Schneider-muntau, and G. Gottstein, Analytical modeling of the electrical conductivity of metal matrix composites: application, 2003.

E. Hervé and A. Zaoui, inclusion-based micromechanical modelling, International Journal of Engineering Science, vol.31, issue.1, pp.1-10, 1993.
DOI : 10.1016/0020-7225(93)90059-4

E. Hervé and A. Zaoui, Elastic behaviour of multiply coated fibre-reinforced composites, International Journal of Engineering Science, vol.33, issue.10, pp.1419-1433, 1995.
DOI : 10.1016/0020-7225(95)00008-L

E. Hervé-luanco, Elastic behavior of composites containing multi-layer coated particles with imperfect interface bonding conditions and application to size effects and mismatch in these composites, International Journal of Solids and Structures, vol.51, issue.15-16, pp.512865-2877, 2014.
DOI : 10.1016/j.ijsolstr.2014.04.008

E. Hervé-luanco and S. Joannès, Multiscale modelling of transport phenomena for materials with n -layered embedded fibres. Part I: Analytical and numerical-based approaches, International Journal of Solids and Structures, vol.97, issue.98, pp.625-636, 2016.
DOI : 10.1016/j.ijsolstr.2016.05.015

R. Hill, Elastic properties of reinforced solids: Some theoretical principles, Journal of the Mechanics and Physics of Solids, vol.11, issue.5, pp.357-372, 1963.
DOI : 10.1016/0022-5096(63)90036-X

R. Hill, Continuum micro-mechanics of elastoplastic polycrystals, Journal of the Mechanics and Physics of Solids, vol.13, issue.2, pp.89-101, 1965.
DOI : 10.1016/0022-5096(65)90023-2

R. Hill, A self-consistent mechanics of composite materials, Journal of the Mechanics and Physics of Solids, vol.13, issue.4, pp.213-222, 1965.
DOI : 10.1016/0022-5096(65)90010-4

Q. Huang, C. M. Lilley, M. Bode, and R. Divan, Surface and size effects on the electrical properties of Cu nanowires, Journal of Applied Physics, vol.104, issue.2, p.23709, 2008.
DOI : 10.1063/1.2180437

M. R. Islam and A. Pramila, Thermal Conductivity of Fiber Reinforced Composites by the FEM, Journal of Composite Materials, vol.21, issue.18, pp.1699-1715, 1999.
DOI : 10.1016/0306-2619(86)90073-5

S. Joannès and E. Hervé-luanco, Multiscale modelling of transport phenomena for materials with n -layered embedded fibres. Part??II: Investigation of fibre packing effects, International Journal of Solids and Structures, vol.97, issue.98, pp.566-574, 2016.
DOI : 10.1016/j.ijsolstr.2016.06.026

T. Kanit, S. Forest, I. Galliet, V. Mounoury, and D. Jeulin, Determination of the size of the representative volume element for random composites: statistical and numerical approach, International Journal of Solids and Structures, vol.40, issue.13-14, pp.403647-3679, 2003.
DOI : 10.1016/S0020-7683(03)00143-4

A. Kanjarla, R. Lebensohn, L. Balogh, and C. Tomé, Study of internal lattice strain distributions in stainless steel using a full-field elasto-viscoplastic formulation based on fast Fourier transforms, Acta Materialia, vol.60, issue.6-7, pp.603094-3106, 2012.
DOI : 10.1016/j.actamat.2012.02.014

B. Klusemann, B. Svendsen, and H. Vehoff, Investigation of the deformation behavior of Fe???3%Si sheet metal with large grains via crystal plasticity and finite-element modeling, Computational Materials Science, vol.52, issue.1, pp.25-32, 2012.
DOI : 10.1016/j.commatsci.2011.03.042

G. Kneer, ??ber die Berechnung der Elastizit??tsmoduln vielkristalliner Aggregate mit Textur, physica status solidi (b), vol.32, issue.3, pp.825-838, 1965.
DOI : 10.1007/978-3-642-94719-3

E. Kröner, Zur plastischen verformung des vielkristalls, Acta Metallurgica, vol.9, issue.2, pp.155-161, 1961.
DOI : 10.1016/0001-6160(61)90060-8

E. Kröner, Self-consistent scheme and graded disorder in polycrystal elasticity, Journal of Physics F: Metal Physics, vol.8, issue.11, p.2261, 1978.
DOI : 10.1088/0305-4608/8/11/011

L. Kubin, B. Devincre, and T. Hoc, Modeling dislocation storage rates and mean free paths in face-centered cubic crystals, Acta Materialia, vol.56, issue.20, pp.566040-6049, 2008.
DOI : 10.1016/j.actamat.2008.08.012

R. Lebensohn, O. Castelnau, R. Brenner, and P. Gilormini, Study of the antiplane deformation of linear 2-D polycrystals with different microstructures, International Journal of Solids and Structures, vol.42, issue.20, pp.425441-5459, 2005.
DOI : 10.1016/j.ijsolstr.2005.02.051
URL : https://hal.archives-ouvertes.fr/hal-00300102

R. Lebensohn, P. Ponte-castañeda, R. Brenner, and O. Castelnau, Full-Field vs. Homogenization Methods to Predict Microstructure???Property Relations for Polycrystalline Materials, Computational Methods for Microstructure-Property Relationships, pp.393-441, 2011.
DOI : 10.1007/978-1-4419-0643-4_11

R. A. Lebensohn, A. K. Kanjarla, and P. Eisenlohr, An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials, International Journal of Plasticity, vol.32, issue.33, pp.59-69, 2012.
DOI : 10.1016/j.ijplas.2011.12.005

S. Lee, J. Ledonne, S. Lim, I. Beyerlein, and A. Rollett, The heterophase interface character distribution of physical vapor-deposited and accumulative roll-bonded Cu???Nb multilayer composites, Acta Materialia, vol.60, issue.4, pp.1747-1761, 2012.
DOI : 10.1016/j.actamat.2011.12.007

J. Lemaitre and J. Chaboche, Mechanics of solid materials, 1994.

S. Lim and A. Rollett, Length scale effects on recrystallization and texture evolution in Cu layers of a roll-bonded Cu???Nb composite, Materials Science and Engineering: A, vol.520, issue.1-2, pp.189-196, 2009.
DOI : 10.1016/j.msea.2009.05.020

H. Liu, Y. Zhao, G. Ramanath, S. Murarka, W. et al., Thickness dependent electrical resistivity of ultrathin (<40 nm) Cu films, Thin Solid Films, vol.384, issue.1, pp.151-156, 2001.
DOI : 10.1016/S0040-6090(00)01818-6

J. Llorca, M. Elices, and Y. Termonia, Elastic properties of sphere-reinforced composites with a mesophase, Acta Materialia, vol.48, issue.18-19, pp.484589-4597, 2000.
DOI : 10.1016/S1359-6454(00)00245-7

L. Lu, S. Li, L. , and K. , An abnormal strain rate effect on tensile behavior in nanocrystalline copper, Scripta Materialia, vol.45, issue.10, pp.451163-1169, 2001.
DOI : 10.1016/S1359-6462(01)01138-1

L. Lu, Y. Shen, X. Chen, L. Qian, L. et al., Ultrahigh Strength and High Electrical Conductivity in Copper, Science, vol.304, issue.5669, pp.304422-426, 2004.
DOI : 10.1126/science.1092905

P. K. Mallick, Fiber-reinforced composites: materials, manufacturing, and design, 2007.
DOI : 10.1201/9781420005981

G. Martin, N. Ochoa, K. Sai, E. Hervé-luanco, C. et al., A multiscale model for the elastoviscoplastic behavior of Directionally Solidified alloys: Application to FE structural computations, International Journal of Solids and Structures, vol.51, issue.5, pp.511175-1187, 2014.
DOI : 10.1016/j.ijsolstr.2013.12.013
URL : https://hal.archives-ouvertes.fr/hal-00950570

R. Masson, M. Bornert, P. Suquet, and A. Zaoui, An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals, Journal of the Mechanics and Physics of Solids, vol.48, issue.6-7, pp.481203-1227, 2000.
DOI : 10.1016/S0022-5096(99)00071-X
URL : https://hal.archives-ouvertes.fr/hal-00114467

J. Mayeur, I. Beyerlein, C. Bronkhorst, and H. Mourad, Incorporating interface affected zones into crystal plasticity, International Journal of Plasticity, vol.65, pp.206-225, 2015.
DOI : 10.1016/j.ijplas.2014.08.013
URL : https://doi.org/10.1016/j.ijplas.2014.08.013

J. Mayeur, I. Beyerlein, C. Bronkhorst, H. Mourad, and B. Hansen, A crystal plasticity study of heterophase interface character stability of Cu/Nb bicrystals, International Journal of Plasticity, vol.48, pp.72-91, 2013.
DOI : 10.1016/j.ijplas.2013.02.006

J. Medy, Evaluation des effets de taille et d'architecture sur les propriétés mécaniques etélectriquesetélectriques de fils composites métalliques cuivre/niobium fabriqués par déformation plastique sévère, 2016.

L. Méric, G. Cailletaud, and M. Gaspérini, FE calculations of copper bicrystal specimens submitted to tension-compression tests. Acta metallurgica et materialia, pp.921-935, 1994.

L. Méric, P. Poubanne, C. , and G. , Single Crystal Modeling for Structural Calculations: Part 1???Model Presentation, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.162-170, 1991.
DOI : 10.1115/1.2903374

M. A. Meyers, U. R. Andrade, and A. H. Chokshi, The effect of grain size on the high-strain, high-strain-rate behavior of copper. Metallurgical and materials transactions A, pp.262881-2893, 1995.

J. Michel and P. Suquet, Nonuniform transformation field analysis, Multiscale Modelling in Solid Mechanics-Computational Approaches, pp.159-206, 2009.
DOI : 10.1016/S0020-7683(03)00346-9
URL : https://hal.archives-ouvertes.fr/hal-00088331

J. Michel and P. Suquet, A model-reduction approach in micromechanics of materials preserving the variational structure of constitutive relations, Journal of the Mechanics and Physics of Solids, vol.90, pp.254-285, 2016.
DOI : 10.1016/j.jmps.2016.02.005
URL : https://hal.archives-ouvertes.fr/hal-01275596

G. W. Milton, The theory of composites. The Theory of Composites, pp.748-748, 2002.

A. Misra and R. Hoagland, Plastic flow stability of metallic nanolaminate composites, Journal of Materials Science, vol.84, issue.8, pp.1765-1771, 2007.
DOI : 10.1557/S0883769400051514

A. Misra and L. Thilly, Structural metals at extremes, MRS Bull, vol.35, issue.12, pp.965-976, 2010.

A. Molinari, G. Canova, and S. Ahzi, A self consistent approach of the large deformation polycrystal viscoplasticity, Acta Metallurgica, vol.35, issue.12, pp.2983-2994, 1987.
DOI : 10.1016/0001-6160(87)90297-5

T. Mura, Micromechanics of defects in solids, 1987.

A. Musienko, A. Tatschl, K. Schmidegg, O. Kolednik, R. Pippan et al., Three-dimensional finite element simulation of a polycrystalline copper specimen, Acta Materialia, vol.55, issue.12, pp.554121-4136, 2007.
DOI : 10.1016/j.actamat.2007.01.053
URL : https://hal.archives-ouvertes.fr/hal-00165818

S. Nemat-nasser and M. Hori, Micromechanics: Overall Properties of Heterogeneous Materials, Journal of Applied Mechanics, vol.63, issue.2, 2013.
DOI : 10.1115/1.2788912

C. E. Normeinternationale, Méthode de mesure de la résistivité des matériaux métalliques, 1974.

B. Pan, K. Qian, H. Xie, and A. Asundi, Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review, Measurement Science and Technology, vol.20, issue.6, p.62001, 2009.
DOI : 10.1088/0957-0233/20/6/062001

P. Ponte-castañeda and P. Suquet, Nonlinear composites Advances in applied mechanics, pp.171-302, 1998.

J. Qu and M. Cherkaoui, Fundamentals of micromechanics of solids, 2006.
DOI : 10.1002/9780470117835

K. Sai, G. Cailletaud, and S. Forest, Micro-mechanical modeling of the inelastic behavior of directionally solidified materials, Mechanics of Materials, vol.38, issue.3, pp.203-217, 2006.
DOI : 10.1016/j.mechmat.2005.06.007

J. Sambles, K. Elsom, and T. Preist, The resistivity of thin wires, Journal of Physics F: Metal Physics, vol.12, issue.6, p.1169, 1982.
DOI : 10.1088/0305-4608/12/6/017

Y. Schneider, A. Bertram, T. Böhlke, and C. Hartig, Plastic deformation behaviour of Fe???Cu composites predicted by 3D finite element simulations, Computational Materials Science, vol.48, issue.3, pp.456-465, 2010.
DOI : 10.1016/j.commatsci.2010.01.005

K. Schulgasser, On the conductivity of fiber reinforced materials, Journal of Mathematical Physics, vol.17, issue.3, pp.382-387, 1976.
DOI : 10.1063/1.522904

K. Schulgasser, Relationship between single???crystal and polycrystal electrical conductivity, Journal of Applied Physics, vol.5, issue.5, pp.1880-1886, 1976.
DOI : 10.1063/1.1663019

?. Si?ka, F. Forest, S. Gumbsch, P. , W. et al., Finite element simulations of the cyclic elastoplastic behaviour of copper thin films, Modelling and Simulation in Materials Science and Engineering, vol.15, issue.1, p.217, 2006.
DOI : 10.1088/0965-0393/15/1/S17

J. Sivardì-ere, Symétrie et propriétés physiques ? Du principe de Curie aux brisures de symétrie, 2008.

W. Slaughter, The linearized theory of elasticity, 2002.

F. Smits, Measurement of Sheet Resistivities with the Four-Point Probe, Bell System Technical Journal, vol.37, issue.3, pp.711-718, 1958.
DOI : 10.1002/j.1538-7305.1958.tb03883.x

E. H. Sondheimer, The mean free path of electrons in metals Advances in physics, pp.499-537, 2001.

K. Spencer, F. Lecouturier, L. Thilly, and J. Embury, Established and Emerging Materials for use as High-Field Magnet Conductors, Advanced Engineering Materials, vol.6, issue.5, pp.290-297, 2004.
DOI : 10.1002/adem.200400014
URL : https://hal.archives-ouvertes.fr/hal-00015865

W. Steinhögl, G. Schindler, G. Steinlesberger, and M. Engelhardt, Sizedependent resistivity of metallic wires in the mesoscopic range, Physical Review B, issue.7, p.66075414, 2002.

R. Stoller and S. Zinkle, On the relationship between uniaxial yield strength and resolved shear stress in polycrystalline materials, Journal of Nuclear Materials, vol.283, issue.287, pp.349-352, 2000.
DOI : 10.1016/S0022-3115(00)00378-0

A. P. Suvorov and G. J. Dvorak, Rate form of the Eshelby and Hill tensors, International Journal of Solids and Structures, vol.39, issue.21-22, pp.5659-5678, 2002.
DOI : 10.1016/S0020-7683(02)00369-4

L. Tabourot, M. Fivel, and E. Rauch, Generalised constitutive laws for f.c.c. single crystals, Materials Science and Engineering: A, vol.234, issue.236, pp.639-642, 1997.
DOI : 10.1016/S0921-5093(97)00353-5

I. Tavman and H. Akinci, Transverse thermal conductivity of fiber reinforced polymer composites, International Communications in Heat and Mass Transfer, vol.27, issue.2, pp.253-261, 2000.
DOI : 10.1016/S0735-1933(00)00106-8

L. Thilly, Exploration theorique et experimentale de fils nanocomposites continus presentant des proprietes extremes de conductivite electrique et de limite elastique, 2000.

L. Thilly, F. Lecouturier, V. Stebut, and J. , Size-induced enhanced mechanical properties of nanocomposite copper/niobium wires: nanoindentation study, Acta Materialia, vol.50, issue.20, pp.505049-5065, 2002.
DOI : 10.1016/S1359-6454(02)00351-8
URL : https://hal.archives-ouvertes.fr/hal-00015673

L. Thilly, P. Renault, S. Van-petegem, S. Brandstetter, B. Schmitt et al., Evidence of internal Bauschinger test in nanocomposite wires during in situ macroscopic tensile cycling under synchrotron beam, Applied physics letters, issue.24, p.90241907, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00203127

L. Thilly, P. Renault, V. Vidal, F. Lecouturier, S. Van-petegem et al., neutron diffraction: Codeformation and size effect, Applied Physics Letters, vol.88, issue.19, p.88191906, 2006.
DOI : 10.1016/1359-6462(95)00632-X
URL : https://hal.archives-ouvertes.fr/hal-00118721

L. Thilly, S. Van-petegem, P. Renault, F. Lecouturier, V. Vidal et al., A new criterion for elasto-plastic transition in nanomaterials: Application to size, 2009.

L. Thilly, M. Veron, O. Ludwig, and F. Lecouturier, Deformation mechanism in high strength Cu/Nb nanocomposites, Materials Science and Engineering: A, vol.309, issue.310, pp.510-513, 2001.
DOI : 10.1016/S0921-5093(00)01661-0

L. Thomsen, Weak elastic anisotropy, GEOPHYSICS, vol.51, issue.10, pp.511954-1966, 1986.
DOI : 10.1190/1.1442051

P. Turner and C. Tomé, A study of residual stresses in Zircaloy-2 with rod texture, Acta metallurgica et Materialia, pp.424143-4153, 1994.
DOI : 10.1016/0956-7151(94)90191-0

M. Upadhyay, S. Van-petegem, T. Panzner, R. Lebensohn, V. Swygenhoven et al., Study of lattice strain evolution during biaxial deformation of stainless steel using a finite element and fast Fourier transform based multi-scale approach, Acta Materialia, vol.118, pp.28-43, 2016.
DOI : 10.1016/j.actamat.2016.07.028

V. Vidal, L. Thilly, F. Lecouturier, R. , and P. , Cu nanowhiskers embedded in Nb nanotubes inside a multiscale Cu matrix: The way to reach extreme mechanical properties in high strength conductors, Scripta Materialia, vol.57, issue.3, pp.245-248, 2007.
DOI : 10.1016/j.scriptamat.2007.04.001
URL : https://hal.archives-ouvertes.fr/hal-00203137

V. Vidal, L. Thilly, S. Van-petegem, U. Stuhr, F. Lecouturier et al., Plasticity of nanostructured Cu???Nb-based wires: Strengthening mechanisms revealed by in situ deformation under neutrons, Scripta Materialia, vol.60, issue.3, pp.60171-174, 2009.
DOI : 10.1016/j.scriptamat.2008.09.032
URL : https://hal.archives-ouvertes.fr/hal-00442887

V. Vital, Optimisation des propriétés mécaniques des conducteurs nanofilamentaires Cu/X (X=Nb ou Ta) par l'´ etude des mécanismesmécanismesélémentaires de déformation, 2006.

Q. H. Vu, R. Brenner, O. Castelnau, H. Moulinec, and P. Suquet, A self-consistent estimate for linear viscoelastic polycrystals with internal variables inferred from the collocation method, Modelling and Simulation in Materials Science and Engineering, vol.20, issue.2, p.24003, 2012.
DOI : 10.1088/0965-0393/20/2/024003
URL : https://hal.archives-ouvertes.fr/hal-00718324

L. Walpole, Evaluation of the elastic moduli of a transversely isotropic aggregate of cubic crystals, Journal of the Mechanics and Physics of Solids, vol.33, issue.6, pp.623-636, 1985.
DOI : 10.1016/0022-5096(85)90006-7

T. Williams and M. Pindera, An analytical model for the inelastic axial shear response of unidirectional metal matrix composites, International Journal of Plasticity, vol.13, issue.3, pp.261-289, 1997.
DOI : 10.1016/S0749-6419(97)00011-9

J. Willis, Bounds and self-consistent estimates for the overall properties of anisotropic composites, Journal of the Mechanics and Physics of Solids, vol.25, issue.3, pp.185-202, 1977.
DOI : 10.1016/0022-5096(77)90022-9

J. Wippler, S. Fünfschilling, F. Fritzen, T. Böhlke, and M. Hoffmann, Homogenization of the thermoelastic properties of silicon nitride, Acta Materialia, vol.59, issue.15, pp.596029-6038, 2011.
DOI : 10.1016/j.actamat.2011.06.011

M. Yaguchi and E. Busso, On the accuracy of self-consistent elasticity formulations for directionally solidified polycrystal aggregates, International Journal of Solids and Structures, vol.42, issue.3-4, pp.1073-1089, 2005.
DOI : 10.1016/j.ijsolstr.2004.07.009

K. Yoshida, R. Brenner, B. Bacroix, and S. Bouvier, Micromechanical modeling of the work-hardening behavior of single- and dual-phase steels under two-stage loading paths, Materials Science and Engineering: A, vol.528, issue.3, pp.1037-1046, 2011.
DOI : 10.1016/j.msea.2010.10.078

H. Yosio and A. V. Granato, Anharmonicity in noble metals; higher order elastic constants, Phys. Rev, vol.144, pp.411-419, 1966.

A. Zaoui, Structural Morphology and Constitutive Behaviour of Microheterogeneous Materials, 1997.
DOI : 10.1007/978-3-7091-2662-2_6
URL : https://hal.archives-ouvertes.fr/hal-00112489

M. Zecevic and M. Knezevic, A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4, International Journal of Plasticity, vol.72, pp.200-217, 2015.
DOI : 10.1016/j.ijplas.2015.05.018

C. Zener, Elasticity and Anelasticity of Metals., The Journal of Physical and Colloid Chemistry, vol.53, issue.9, 1948.
DOI : 10.1021/j150474a017