H. Nathanson, W. Newell, R. Wickstrom, and J. Davis, The resonant gate transistor, IEEE Transactions on Electron Devices, vol.14, issue.3, pp.117-133
DOI : 10.1109/T-ED.1967.15912

M. Parameswaran, H. Baltes, and A. Robinson, Polysilicon microbridge fabrication using standard CMOS technology, " in IEEE Technical Digest on Solid-State Sensor and Actuator Workshop, IEEE, vol.5, pp.148-150, 1988.

G. Moore, Cramming More Components Onto Integrated Circuits, Proceedings of the IEEE, vol.86, issue.1, pp.82-85, 1998.
DOI : 10.1109/JPROC.1998.658762

H. Fujita, Microactuators and micromachines, Proceedings of the IEEE, vol.86, issue.8, pp.1721-1732, 1998.
DOI : 10.1109/5.704278

R. E. Pearson, L. F. Fuller, and I. Puchades, MEMS Fabrication Course for Pressure Sensors, Flow Sensors, Fluidic Channels and Micro-Pumps, 2008 17th Biennial University/Government/Industry Micro/Nano Symposium, pp.70-74, 2008.
DOI : 10.1109/UGIM.2008.26

L. Hornbeck, Digital Light Processing and MEMS: an overview Advanced Applications of Lasers in Materials and Processing, Digest IEEE/Leos 1996 Summer Topical Meeting, pp.7-8, 1996.

P. Gilgunn, J. Liu, N. Sarkar, and G. Fedder, CMOS???MEMS Lateral Electrothermal Actuators, Journal of Microelectromechanical Systems, vol.17, issue.1, pp.103-114, 2008.
DOI : 10.1109/JMEMS.2007.911373

D. Dellaert and J. Doutreloigne, Modeling and simulation of a MEMS thermal actuator with polysilicon heater Mechanical and Mulit-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2014 15th International Conference on Thermal, pp.1-6, 2014.

A. A. Fomani, S. Fouladi, and R. R. Mansour, Magnetically-actuated dielectric cantilever RF MEMS switches, IEEE MTT-S International Microwave Symposium. IEEE, pp.296-299, 2010.
DOI : 10.1109/mwsym.2010.5517075

A. Flynn, L. Tavrow, S. Bart, R. Brooks, D. Ehrlich et al., Piezoelectric micromotors for microrobots, Journal of Microelectromechanical Systems, vol.1, issue.1, pp.44-51, 1992.
DOI : 10.1109/84.128055

. Timme, Full integration of a pressure-sensor system into a standard BiCMOS process, Sensors and Actuators A: Physical, vol.67, issue.1-3, pp.211-214

D. Tanner, S. Swanson, J. Walraven, and J. Dohner, On-chip monitoring of MEMS gear motion, 2003 IEEE International Reliability Physics Symposium Proceedings, 2003. 41st Annual., pp.484-490, 2003.
DOI : 10.1109/RELPHY.2003.1197796

S. Fuller, E. Wilhelm, and J. Jacobson, Ink-jet printed nanoparticle microelectromechanical systems, Journal of Microelectromechanical Systems, vol.11, issue.1, pp.54-60, 2002.
DOI : 10.1109/84.982863
URL : http://www.media.mit.edu/~jacobson/IEEE-MEMS2-02.pdf

G. Rebeiz and J. Muldavin, RF MEMS switches and switch circuits, IEEE Microwave Magazine, vol.2, issue.4, pp.59-71, 2001.
DOI : 10.1109/6668.969936

K. E. Petersen, Micromechanical Membrane Switches on Silicon, IBM Journal of Research and Development, vol.23, issue.4, pp.376-385, 1979.
DOI : 10.1147/rd.234.0376

H. A. Tilmans, W. D. Raedt, and E. Beyne, MEMS for wireless communications: ??from RF-MEMS components to RF-MEMS-SiP??, Journal of Micromechanics and Microengineering, vol.13, issue.4, pp.139-163, 2003.
DOI : 10.1088/0960-1317/13/4/323

T. Gomm, L. L. Howell, and R. H. Selfridge, In-plane linear displacement bistable microrelay, Journal of Micromechanics and Microengineering, vol.12, issue.3, pp.257-264, 2002.
DOI : 10.1088/0960-1317/12/3/310

M. Baker and L. Howell, On-chip actuation of an in-plane compliant bistable micromechanism, Journal of Microelectromechanical Systems, vol.11, issue.5, pp.566-573, 2002.
DOI : 10.1109/JMEMS.2002.803284

N. Masters and L. Howell, A self-retracting fully compliant bistable micromechanism, Journal of Microelectromechanical Systems, vol.12, issue.3, pp.273-280, 2003.
DOI : 10.1109/JMEMS.2003.811751

J. Qiu, J. Lang, A. Slocum, and A. Weber, A bulk-micromachined bistable relay with U-shaped thermal actuators, Journal of Microelectromechanical Systems, vol.14, issue.5, pp.1099-1109, 2005.

M. Sterner, N. Roxhed, G. Stemme, and J. Oberhammer, Coplanar-waveguide embedded mechanically-bistable DC-to-RF MEMS switches, 2007 IEEE/MTT-S International Microwave Symposium, pp.359-362, 2007.
DOI : 10.1109/MWSYM.2007.380445

M. Daneshmand, S. Fouladi, R. Mansour, M. Lisi, and T. Stajcer, Thermally Actuated Latching RF MEMS Switch and Its Characteristics, IEEE Transactions on Microwave Theory and Techniques, vol.57, issue.12, pp.3229-3238, 2009.
DOI : 10.1109/TMTT.2009.2033866

W. Chen, C. Chu, J. Hsieh, and W. Fang, A reliable single-layer out-of-plane micromachined thermal actuator, Sensors and Actuators A: Physical, vol.103, issue.1-2, pp.48-58, 2003.
DOI : 10.1016/S0924-4247(02)00315-1

D. Girbau, M. A. Llamas, J. Casals-terre, X. Simo-selvas, L. Pradell et al., A Low-Power-Consumption Out-of-Plane Electrothermal Actuator, Journal of Microelectromechanical Systems, vol.16, issue.3, pp.719-727, 2007.
DOI : 10.1109/JMEMS.2007.896714

W. Taylor, O. Brand, and M. Allen, Fully integrated magnetically actuated micromachined relays, Journal of Microelectromechanical Systems, vol.7, issue.2, pp.181-191, 1998.
DOI : 10.1109/84.679353

S. Zhang, W. Su, M. Zaghloul, and B. Thibeault, Wideband CMOS Compatible Capacitive MEMS Switch for RF Applications, IEEE Microwave and Wireless Components Letters, vol.18, issue.9, pp.599-601, 2008.
DOI : 10.1109/LMWC.2008.2002455

G. Fedder, R. Howe, T. Liu, and E. Quevy, Technologies for Cofabricating MEMS and Electronics, Proceedings of the IEEE, vol.96, issue.2, pp.306-322, 2008.
DOI : 10.1109/JPROC.2007.911064

R. R. Mansour, RF MEMS-CMOS Device Integration: An Overview of the Potential for RF Researchers, IEEE Microwave Magazine, vol.14, issue.1, pp.39-56, 2013.
DOI : 10.1109/MMM.2012.2226539

J. Smith, J. Montague, J. Sniegowski, P. Murray, and . Mcwhorter, Embedded micromechanical devices for the monolithic integration of MEMS with CMOS, Proceedings of International Electron Devices Meeting, pp.609-612, 1995.

R. Gaddi, R. Van-kampen, A. Unamuno, V. Joshi, D. Lacey et al., MEMS technology integrated in the CMOS back end, Microelectronics Reliability, vol.50, issue.9-11, pp.1593-1598
DOI : 10.1016/j.microrel.2010.07.113

A. Franke, J. Heck, T. King, and R. Howe, Polycrystalline silicon-germanium films for integrated microsystems, Journal of Microelectromechanical Systems, vol.12, issue.2, pp.160-171, 2003.
DOI : 10.1109/JMEMS.2002.805051

S. P. Natarajan, S. J. Cunningham, A. S. Morris, and D. R. Dereus, CMOS integrated digital RF MEMS capacitors, 2011 IEEE 11th Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems, pp.173-176, 2011.
DOI : 10.1109/SIRF.2011.5719327

G. Fedder, S. Santhanam, M. Reed, S. Eagle, D. Guillou et al., Laminated high-aspect-ratio microstructures in a conventional CMOS process, Proceedings of Ninth International Workshop on Micro Electromechanical Systems, pp.13-18, 1996.

H. Xie, L. Erdmann, X. Zhu, K. Gabriel, and G. Fedder, Post-CMOS processing for high-aspect-ratio integrated silicon microstructures, Journal of Microelectromechanical Systems, vol.11, issue.2, pp.93-101, 2002.

G. Fedder, J. G. Kaigham, M. A. Maher, and M. Tamal, Application-Specific Integrated- Microelectromechanical Systems ( MEMS ) process services ( ASIMPS ), 2005.

D. Gardner and P. Flinn, Mechanical stress as a function of temperature in aluminum films, IEEE Transactions on Electron Devices, vol.35, issue.12, pp.2160-2169, 1988.
DOI : 10.1109/16.8790

R. Abermann, Measurements of the intrinsic stress in thin metal films, Vacuum, vol.41, issue.4-6, pp.1279-1282, 1990.
DOI : 10.1016/0042-207X(90)93933-A

E. Klokholm and B. S. Berry, Intrinsic Stress in Evaporated Metal Films, Journal of The Electrochemical Society, vol.115, issue.8, p.823, 1968.
DOI : 10.1149/1.2411441

L. B. Freund and S. Suresh, Thin Film Materials. Cambridge, p.37, 2004.

S. Wolf and R. N. Tauber, Silicon Processing for the VLSI Era, Process Technology, p.12, 1986.

I. Ames, F. M. D-'heurle, and R. E. Horstmann, Reduction of Electromigration in Aluminum Films by Copper Doping, IBM Journal of Research and Development, vol.14, issue.4, pp.461-463, 1970.
DOI : 10.1147/rd.144.0461

W. D. Nix, Mechanical properties of thin films, Metallurgical Transactions A, vol.130, issue.11, pp.2217-2245, 1989.
DOI : 10.1557/PROC-130-93

R. Machunze and G. Janssen, Stress gradients in titanium nitride thin films, Surface and Coatings Technology, vol.203, issue.5-7, pp.5-7, 2008.
DOI : 10.1016/j.surfcoat.2008.05.005

R. Liu, B. Jiao, Y. Kong, Z. Li, H. Shang et al., Elimination of initial stress-induced curvature in a micromachined bi-material composite-layered cantilever, Journal of Micromechanics and Microengineering, vol.23, issue.9, p.95019, 2013.
DOI : 10.1088/0960-1317/23/9/095019

S. Wang, J. Chen, D. Li, Y. Huang, Z. Li et al., Evaluating Interface Effect On Stresses In Thin Films By A Local Curvature Metrology With High Accuracy And Resolution, 2006 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems, pp.1513-1516, 2006.
DOI : 10.1109/NEMS.2006.334819

A. Bohg, Measurement of stresses in thin films on single crystalline substrates, Physica Status Solidi (a), vol.13, issue.2, pp.445-450, 1978.
DOI : 10.6028/jres.042.009

P. Flynn, D. Gardner, and W. Nix, Measurement and Interpretation of stress in aluminum-based metallization as a function of thermal history, IEEE Transactions on Electron Devices, vol.34, issue.3, pp.689-699, 1987.
DOI : 10.1109/T-ED.1987.22981

L. Maniguet, M. Ignat, M. Dupeux, J. Bacmann, and P. Normandon, X-ray Determination and Analysis of Residual Stresses in Uniform Films and Patterned Lines of Tungsten, MRS Proceedings, p.285, 1993.

G. G. Stoney, The Tension of Metallic Films Deposited by Electrolysis, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, pp.172-175, 1909.
DOI : 10.1098/rspa.1909.0021

N. Schwarzer and F. Richter, On the Determination of Film Stress from Substrate Bending: STONEY's Formula and Its Limits, TU Chemnitz, Fakultat fur Naturwissenschaften, p.13, 2004.

R. Jaeger, J. Suhling, R. Ramani, A. Bradley, and J. Xu, CMOS stress sensors on [100] silicon, IEEE Journal of Solid-State Circuits, vol.35, issue.1, pp.85-95, 2000.
DOI : 10.1109/4.818923

K. A. Ewuame, V. Fiori, K. Inal, P. Bouchard, S. Gallois-garreignot et al., Investigations of Thermomechanical Stress Induced by TSV-Middle (Through-Silicon via) in 3-D ICs by Means of CMOS Sensors and Finite-Element Method, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.5, issue.8, pp.1085-1092, 2015.
DOI : 10.1109/TCPMT.2015.2445099
URL : https://hal.archives-ouvertes.fr/hal-01221158

C. Wilson, A. Horsfall, A. O. Neill, N. Wright, K. Wang et al., Direct Measurement of Electromigration Induced Stress in Interconnect Structures, 2006 IEEE International Reliability Physics Symposium Proceedings, pp.123-127, 2006.

M. Kasbari, C. Rivero, S. Blayac, F. Cacho, O. Bostrom et al., Direct Local Strain Measurement In Damascene Interconnects, MRS Proceedings, pp.990-997, 2007.
DOI : 10.1016/S0167-9317(03)00372-1

A. Horsfall, J. Santos, S. Soare, N. Wright, A. O. Neill et al., A novel sensor for the direct measurement of process induced residual stress in interconnects, Electrical Performance of Electrical Packaging (IEEE Cat. No. 03TH8710), pp.115-118, 2003.
DOI : 10.1109/ESSDERC.2003.1256824

R. Vayrette, C. Rivero, B. Gros, S. Blayac, and K. Inal, Residual stress estimation in damascene copper interconnects using embedded sensors, Microelectronic Engineering, vol.87, issue.3, pp.412-415, 2010.
DOI : 10.1016/j.mee.2009.05.017
URL : https://hal.archives-ouvertes.fr/emse-00450882

R. Holm, Electric Contacts, 1967.
DOI : 10.1007/978-3-662-06688-1

J. A. Greenwood and J. B. Williamson, Contact of Nominally Flat Surfaces, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, pp.300-319, 1966.
DOI : 10.1098/rspa.1966.0242

H. Hertz, Miscellaneous papers. London ; New York : Macmillan, 1896., 1896

A. Majumdar and B. Bhushan, Fractal Model of Elastic-Plastic Contact Between Rough Surfaces, Journal of Tribology, vol.113, issue.1, pp.113-114, 1991.
DOI : 10.1115/1.2920588

R. L. Jackson and J. L. Streator, A multi-scale model for contact between rough surfaces, Wear, vol.261, issue.19, pp.11-12, 2006.

V. A. Yastrebov, J. Durand, H. Proudhon, and G. Cailletaud, Rough surface contact analysis by means of the Finite Element Method and of a new reduced model, Comptes Rendus M??canique, vol.339, issue.7-8, pp.473-490, 2011.
DOI : 10.1016/j.crme.2011.05.006
URL : https://hal.archives-ouvertes.fr/hal-00624090

P. Duvivier, Etude expérimentale et modelisation du contact electrique et mecanique quasi statique entre surfaces rugueuses d'or : application aux micro-relais MEMS, École Nationale Supérieure des Mines de Saint-Étienne, pp.16-22, 2010.

B. Arrazat, Maitrise de la Microstructure de films minces d'or par traitements de surface pour l'optimisation du contact mecanique et ohmique des micro-relais MEMS, Ecole Nationale Supérieure des Mines de Saint-Etienne, pp.16-23, 2012.
URL : https://hal.archives-ouvertes.fr/tel-01089963

K. Kataoka, S. Kawamura, T. Itoh, T. Suga, K. Ishikawa et al., Low contact-force and compliant MEMS probe card utilizing fritting contact, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266), pp.364-367, 2002.
DOI : 10.1109/MEMSYS.2002.984278

A. Broue, J. Dhennin, P. Charvet, P. Pons, N. B. Jemaa et al., Multi-Physical Characterization of Micro-Contact Materials for MEMS Switches, 2010 Proceedings of the 56th IEEE Holm Conference on Electrical Contacts, pp.1-10
DOI : 10.1109/HOLM.2010.5619519
URL : https://hal.archives-ouvertes.fr/hal-00670153

J. Zhan, J. Zhao, S. Xu, and P. Zhu, Study of the contact force in free-form-surfaces compliant EDM polishing by robot, Journal of Materials Processing Technology, vol.129, issue.1-3, pp.186-189, 2002.
DOI : 10.1016/S0924-0136(02)00640-4

S. Bograd, P. Reuss, A. Schmidt, L. Gaul, and M. Mayer, Modeling the dynamics of mechanical joints, Mechanical Systems and Signal Processing, vol.25, issue.8, pp.2801-2826, 2011.
DOI : 10.1016/j.ymssp.2011.01.010

F. Pennec, Modelisation du contact metal-metal: Application aux microcommutateurs MEMS RF, p.23, 2009.

X. Miao and X. Huang, A complete contact model of a fractal rough surface, Wear, vol.309, issue.1-2, pp.146-151, 2014.
DOI : 10.1016/j.wear.2013.10.014

R. Timsit, Electrical contact resistance: properties of stationary interfaces, IEEE Transactions on Components and Packaging Technologies, vol.22, issue.1, pp.85-98
DOI : 10.1109/6144.759357

F. Chiu, A Review on Conduction Mechanisms in Dielectric Films Advances in, Materials Science and Engineering, vol.2014578168, pp.1-18, 2014.

K. Gloos, P. J. Koppinen, and J. P. Pekola, Properties of native ultrathin aluminium oxide tunnel barriers, Journal of Physics: Condensed Matter, vol.15, issue.10, pp.1733-1746, 2003.
DOI : 10.1088/0953-8984/15/10/320

S. Sze and K. K. Ng, Physics of Semiconductor Devices, p.34, 2006.

K. Chen, A. Ayon, X. Zhang, and S. Spearing, Effect of process parameters on the surface morphology and mechanical performance of silicon structures after deep reactive ion etching (DRIE), Journal of Microelectromechanical Systems, vol.11, issue.3, pp.264-275, 2002.
DOI : 10.1109/JMEMS.2002.1007405

J. Yue, W. Funsten, and R. Taylor, Stress Induced Voids in Aluminum Interconnects During IC Processing, 23rd International Reliability Physics Symposium, pp.126-137
DOI : 10.1109/IRPS.1985.362087

F. Yost, D. Amos, and A. Romig, Stress-driven diffusive voiding of aluminum conductor lines, 27th Annual Proceedings., International Reliability Physics Symposium. IEEE, pp.193-201, 1989.

S. Lahiri, Mechanical stress induced void and hillock formations in thin films, Proceedings of IEEE International Workshop on Memory Technology, Design, and Test, pp.22-25, 1994.
DOI : 10.1109/MTDT.1994.397202

M. A. Haque and M. T. Saif, Deformation mechanisms in free-standing nanoscale thin films: A quantitative in situ transmission electron microscope study, Proceedings of the National Academy of Sciences, vol.48, issue.12, pp.6335-6375, 2004.
DOI : 10.1016/S0022-5096(99)00022-8

K. S. Chen, A. A. Ayon, K. A. Lohner, M. A. Kepets, T. K. Melconian et al., Dependence Of Silicon Fracture Strength And Surface Morphology On Deep Reactive Ion Etching Parameters, MRS Proceedings, p.21, 1998.
DOI : 10.1557/PROC-546-21

R. S. Timsit, Constriction Resistance of Thin Film Contacts, IEEE Transactions on Components and Packaging Technologies, vol.33, issue.3, pp.636-642
DOI : 10.1109/TCAPT.2010.2052051

I. Yeo, P. S. Ho, and S. G. Anderson, Characteristics of thermal stresses in Al(Cu) fine lines. I. Unpassivated line structures, Journal of Applied Physics, vol.48, issue.2, pp.94578-94614, 1063.
DOI : 10.1557/JMR.1992.2040

C. Poulain, A. Peschot, M. Vincent, and N. Bonifaci, A Nano-Scale Investigation of Material Transfer Phenomena at Make in a MEMS Switch, 2011 IEEE 57th Holm Conference on Electrical Contacts (Holm), pp.1-7, 2011.
DOI : 10.1109/HOLM.2011.6034801

Z. Hou, Z. Liu, and Z. Li, Al/Au composite membrane bridge DC-contact series RF MEMS switch, 9th International Conference on Solid-State and Integrated-Circuit Technology. IEEE, pp.2488-2491, 2008.

D. Dickrell and M. Dugger, Silicone Oil Contamination and Electrical Contact Resistance Degradation of Low-Force Gold Contacts, Journal of Microelectromechanical Systems, vol.16, issue.1, pp.24-28, 2007.
DOI : 10.1109/JMEMS.2006.885984

Q. Ma, Q. Tran, T. A. Chou, J. Heck, H. Bar et al., Metal contact reliability of RF MEMS switches, Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS VI, pp.646-305, 2007.
DOI : 10.1117/12.702177

K. L. Johnson, Contact mechanics and the wear of metals, Wear, vol.190, issue.2, pp.162-170, 1995.
DOI : 10.1016/0043-1648(95)06665-9

A. Carré and J. Schultz, Polymer-Aluminium Adhesion. I. The Surface Energy of Aluminium in Relation to its Surface Treatment, The Journal of Adhesion, vol.89, issue.2, pp.151-161, 1983.
DOI : 10.1080/00218467208072199

N. Tas, T. Sonnenberg, H. Jansen, R. Legtenberg, and M. Elwenspoek, Stiction in surface micromachining, Journal of Micromechanics and Microengineering, vol.6, issue.4, pp.385-397, 1996.
DOI : 10.1088/0960-1317/6/4/005

B. D. Jensen, K. Huang, L. L. Chow, and K. Kurabayashi, Adhesion effects on contact opening dynamics in micromachined switches, Journal of Applied Physics, vol.97, issue.10, pp.103535-103575, 2005.
DOI : 10.1063/1.1757633

L. Chen, N. E. Mcgruer, G. G. Adams, and Y. Du, Separation modes in microcontacts identified by the rate dependence of the pull-off force, Applied Physics Letters, vol.93, issue.5, p.53503, 2008.
DOI : 10.1016/S0370-1573(02)00633-6

A. Tonck, F. Houzé, L. Boyer, J. L. Loubet, and J. M. Georges, Electrical and mechanical contact between rough gold surfaces in air, Journal of Physics: Condensed Matter, vol.3, issue.27, pp.5195-5201, 1991.
DOI : 10.1088/0953-8984/3/27/013

R. Legtenberg, Electrostatic actuators fabricated by surface micromachining techniques, p.41, 1996.

A. Bohg, Measurement of stresses in thin films on single crystalline substrates, Physica Status Solidi (a), vol.13, issue.2, pp.445-450, 1978.
DOI : 10.6028/jres.042.009

L. B. Freund and S. Suresh, Thin Film Materials. Cambridge, p.78, 2004.

W. D. Nix, Mechanical properties of thin films, Metallurgical Transactions A, vol.130, issue.11, pp.2217-2245, 1989.
DOI : 10.1557/PROC-130-93

R. Machunze and G. Janssen, Stress gradients in titanium nitride thin films, Surface and Coatings Technology, vol.203, issue.5-7, pp.5-7, 2008.
DOI : 10.1016/j.surfcoat.2008.05.005

H. Liu, Q. Xu, X. Zhang, C. Wang, and B. Tang, Residual stress analysis of TiN film fabricated by plasma immersion ion implantation and deposition process, Physics Research Section B: Beam Interactions with Materials and Atoms, pp.1-6, 2013.
DOI : 10.1016/j.nimb.2012.12.015

J. Kamminga, T. De-keijser, R. Delhez, and E. Mittemeijer, A model for stress in thin layers induced by misfitting particles, Thin Solid Films, vol.317, issue.1-2, pp.169-172, 1998.
DOI : 10.1016/S0040-6090(97)00614-7

O. Bostrom, Wafer shape control. Study of the reactivity in Ti/Al dual layers and its effect on the stress, p.69, 2001.

P. A. Flinn and C. Chiang, X???ray diffraction determination of the effect of various passivations on stress in metal films and patterned lines, Journal of Applied Physics, vol.52, issue.6, pp.2927-70, 1990.
DOI : 10.1088/0305-4608/1/3/307

A. Sauter and W. Nix, Thermal stresses in aluminum lines bounded to substrates, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, pp.594-600, 1992.
DOI : 10.1109/33.159891

S. Timoshenko, Analysis of Bi-Metal Thermostats, Journal of the Optical Society of America, vol.11, issue.3, p.233, 1925.
DOI : 10.1364/JOSA.11.000233

J. Vilms, Simple stress formula for multilayered thin films on a thick substrate, Journal of Applied Physics, vol.44, issue.3, pp.1536-72, 1063.
DOI : 10.1109/JQE.1981.1071173

D. G. Fertis, Advanced Mechanics of Structures, Advanced Mechanics of Structures, pp.512-73, 1996.

M. Kasbari, Intégration de capteurs pour le suivi des contraintes mécaniques sur une ligne de production microélectronique, Ecole Nationale Supérieure des Mines de Saint-Etienne, p.81, 2008.

N. Bozzolo, S. Jacomet, and R. Logé, Fast in-situ annealing stage coupled with EBSD: A suitable tool to observe quick recrystallization mechanisms, Materials Characterization, vol.70, issue.2012, pp.28-32, 2012.
DOI : 10.1016/j.matchar.2012.04.020
URL : https://hal.archives-ouvertes.fr/hal-00709665

S. T. Todd and H. Xie, Steady-state 1D electrothermal modeling of an electrothermal transducer, Journal of Micromechanics and Microengineering, vol.16, issue.3, pp.665-665, 2006.
DOI : 10.1088/0960-1317/16/3/C01

B. Arrazat, S. Orellana, C. Rivero, P. Fornara, A. D. Giacomo et al., From stress sensor towards back end of line embedded thermo-mechanical sensor, Microelectronic Engineering, vol.120, pp.41-46, 2014.
DOI : 10.1016/j.mee.2013.12.013
URL : https://hal.archives-ouvertes.fr/hal-00932762

L. B. Freund and S. Suresh, Thin Film Materials. Cambridge, p.110, 2004.

M. Burzo, P. Komarov, and P. Raad, Thermal transport properties of gold-covered thin-film silicon dioxide, IEEE Transactions on Components and Packaging Technologies, vol.26, issue.1, pp.80-88, 2003.
DOI : 10.1109/TCAPT.2003.811467

. Mikron, Table of emissivity of various surfaces, Tech. Rep, p.104

L. L. Chow, Z. Wang, B. D. Jensen, K. Saitou, J. L. Volakis et al., Skin-Effect Self-Heating in Air-Suspended RF MEMS Transmission-Line Structures, Journal of Microelectromechanical Systems, vol.15, issue.6, pp.1622-1631, 2006.
DOI : 10.1109/JMEMS.2006.883581

.. Electrical-switch-functionality:-contact-conductance, 141 4.2.1 Chemical analysis: contact surfaces oxidation, p.141

]. S. Orellana, B. Arrazat, P. Fornara, C. Rivero, S. Blayac et al., Robust design of thermo-mechanical MEMS switch embedded in aluminium BEOL interconnect, Microelectronics Reliability, vol.55, issue.9-10, 1896.
DOI : 10.1016/j.microrel.2015.06.032
URL : https://hal.archives-ouvertes.fr/hal-01180626

B. Arrazat, S. Orellana, C. Rivero, P. Fornara, A. Di-giacomo et al., Determination of material properties and failure using in-situ thermo-mechanical probe, 2014 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), pp.1-5, 2014.
DOI : 10.1109/DTIP.2014.7056700
URL : https://hal.archives-ouvertes.fr/hal-01143767

B. El-kareh and L. N. Hutter, Silicon Analog Components, 2015.
DOI : 10.1007/978-1-4939-2751-7

A. G. Evans and J. W. Hutchinson, The thermomechanical integrity of thin films and multilayers, Acta Metallurgica et Materialia, vol.43, issue.7, pp.2507-2530, 1995.
DOI : 10.1016/0956-7151(94)00444-M

E. Crinon and J. Evans, The effect of surface roughness, oxide film thickness and interfacial sliding on the electrical contact resistance of aluminium, Materials Science and Engineering: A, vol.242, issue.1-2, pp.121-128, 1998.
DOI : 10.1016/S0921-5093(97)00508-X

L. Kogut and K. Komvopoulos, Breakdown of ultrathin native oxide films at contact interfaces of electromechanically stressed silicon microdevices, Journal of Applied Physics, vol.40, issue.12, pp.124102-146, 2005.
DOI : 10.1109/JMEMS.2002.1007406

J. Schultze and M. Lohrengel, Stability, reactivity and breakdown of passive films. Problems of recent and future research, Electrochimica Acta, vol.45, issue.15-16, pp.15-16, 2000.
DOI : 10.1016/S0013-4686(00)00347-9

M. Biesinger, X-ray Photoelectron Spectroscopy (XPS) Reference Pages, p.142, 2008.

T. A. Carlson and G. Mcguire, Study of the x-ray photoelectron spectrum of tungsten???tungsten oxide as a function of thickness of the surface oxide layer, Journal of Electron Spectroscopy and Related Phenomena, vol.1, issue.2, pp.161-168, 1972.
DOI : 10.1016/0368-2048(72)80029-X

B. R. Strohmeier, An ESCA method for determining the oxide thickness on aluminum alloys, Surface and Interface Analysis, vol.35, issue.1, pp.51-56
DOI : 10.1007/978-3-642-88152-7_57

F. Chiu, A Review on Conduction Mechanisms in Dielectric Films Advances in, Materials Science and Engineering, vol.2014578168, issue.145, pp.1-18, 2014.

H. Spahr, S. Montzka, J. Reinker, F. Hirschberg, W. Kowalsky et al., layers, Journal of Applied Physics, vol.3, issue.18, pp.183714-148, 2013.
DOI : 10.1063/1.4756788

Y. C. Yeo, T. J. King, and C. Hu, Metal-dielectric band alignment and its implications for metal gate complementary metal-oxide-semiconductor technology, Journal of Applied Physics, vol.2000, issue.12, p.7266, 2002.
DOI : 10.1016/0039-6028(86)90857-5

Y. Q. Wu, H. C. Lin, P. D. Ye, and G. D. Wilk, Current transport and maximum dielectric strength of atomic-layer-deposited ultrathin Al2O3 on GaAs, Applied Physics Letters, vol.90, issue.7, p.72105, 2007.
DOI : 10.1063/1.1710030

K. Ganesan, S. Ilango, M. Shanmugam, M. F. Baroughi, M. Kamruddin et al., Pre- and post-breakdown electrical studies in ultrathin Al2O3 films by??conductive atomic force microscopy, Current Applied Physics, vol.13, issue.9, pp.1865-1869, 2013.
DOI : 10.1016/j.cap.2013.07.017

N. Klein, Electrical breakdown of aluminum oxide films flanked by metallic electrodes, Journal of Applied Physics, vol.67, issue.8, p.5840, 1982.
DOI : 10.1149/1.2403265

P. Tsang, S. Ogura, W. Walker, J. Shepard, and D. Critchlow, Fabrication of high-performance LDDFET's with Oxide sidewall-spacer technology, IEEE Transactions on Electron Devices, vol.29, issue.4, pp.590-596, 1982.
DOI : 10.1109/T-ED.1982.20748

Y. C. Peng, Structural and electrical properties of chemical vapor deposition tungsten overgrowth on physical vapor deposited and metalorganic chemical vapor deposited TiN adhesion layers, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.16, issue.4, p.2013, 1998.
DOI : 10.1116/1.590122

V. D. Barth and G. W. Rengstorff, Oxidation of tungsten, Defense Metals Information Center, p.150, 1961.

S. Cifuentes, M. Monge, and P. Pérez, On the oxidation mechanism of pure tungsten in the temperature range 600???800??C, Corrosion Science, vol.57, pp.114-121, 2012.
DOI : 10.1016/j.corsci.2011.12.027

L. B. Freund, S. Suresh, and .. , Thin Film Materials Available: http://ebooks.cambridge.org/ref/id/CBO9780511754715 Conclusions & Perspectives Contents Conclusions, p.166, 2004.

S. Arrazat, C. Orellana, P. Rivero, A. Fornara, S. Di-giacomo et al., Determination of material properties and failure using in-situ thermomechanical probe, 2014 Symposium on Design, pp.1-5, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01143767

. Montmitonnet, Improvement of freestanding CMOS-MEMS through detailed stress analysis in metallic layers, 2014 15th International Conference on Thermal, Mechanical and Mulit-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)
URL : https://hal.archives-ouvertes.fr/hal-01024062

G. Arrazat, S. Orellana, C. Rivero, P. Fornara, A. D. Giacomo et al., From stress sensor towards back end of line embedded thermo-mechanical sensor Available: http://linkinghub Robust design of thermo-mechanical MEMS switch embedded in aluminium BEOL interconnect, Microelectronic Engineering Microelectronics Reliability, pp.1-6, 2014.

J. Simo, T. Laursen-]-g, P. Zavarise, B. A. Wriggers, and . Schreer, An augmented lagrangian treatment of contact problems involving friction Available: http://linkinghub On augmented Lagrangian algorithms for thermomechanical contact problems with friction, Computers & StructuresInternational Journal for Numerical Methods in Engineering, vol.42, issue.38 17, pp.97-116, 1992.

. Comsol, Structural Mechanics Module User's Guide, Comsol, Ed. Comsol, p.p, 2014.