». Procédé-de-frittage-sans-pression-«-classique, 79 3.1. Profil de frittage " basse température ", p.80

J. Riou and . Riou, 3] F. Paul, «Airbus to Messier-Bugatti Landing Gear Systems Engineering Co-ordination Memo,» 2010. [4] Safran, «Safran Prêt pour l'Avion Plus Electrique,» 2012, «What is the Young's modulus of Silicon, Bibliographie du Chapitre 1 [1] A. Hebborn, «A380 Landing Gear and Systems ? The feet of the plane,» Airbus Ceramtec, «Guide de selection des matériaux,» 2015. [9] W. Chen et C. Nelson, «Thermal Stress in Bonded Joints,» IBM Journal of Reseach and Development, pp.229-238, 1979.

J. Engerand, «Mécanique de la rupture -Mécanique élastique linéaire de la rupture, 1990.

G. Irwin, «Analysis of stresses and strains near the end of a crack traversing a plate, Journal of Applied Mechanics, vol.24, pp.361-364, 1957.

D. François and A. Pineau, Zaoui, «Viscoplasticité, endommagement, mécanique de la rupture et mécanique du contact

N. Recho, Mécanique de la rupture par fissuration : aspects théorique, conceptuel et numérique

S. Pommier, «Principaux Mécanismes Physiques de Fissuration par Fatigue en Mode I,» ENS, 10 Avril En ligne, 2009.

C. Laird, «The influence of metallurgical structure on the mechanisms of fatigue crack propagation,» ASTM, n° 1415, pp.131-168, 1967.

P. C. Paris, M. P. Gomez, and W. E. Anderson, «A Rational Analytic Theory of Fatigue,» The Trend in Engineering, pp.9-14, 1961.

S. Li and Y. Yan, Intermetallic growth study at Sn???3.0Ag???0.5Cu/Cu solder joint interface during different thermal conditions, Journal of Materials Science: Materials in Electronics, vol.21, issue.463, pp.9470-9477, 2015.
DOI : 10.1007/s10854-010-0086-y

H. Schwarzbauer, «Method of securing electronic components to a substrate», Allemagne Brevet, vol.4810672, 1989.

H. Schwarzbauer and R. Kuhnert, «Novel large area joining technique for improved, IEEE Transactions, vol.27, issue.11, pp.93-95
DOI : 10.1109/ias.1989.96818

F. Yu, R. W. Johnson, and M. Hamilton, Pressureless, Low Temperature Sintering of Micro-scale Silver Paste for Die Attach for 300??C Applications, Additional Conferences (Device Packaging, HiTEC, HiTEN, & CICMT), vol.2014, issue.HITEC, 2014.
DOI : 10.4071/HITEC-WA21

A. Wereszczak, J. Vuono, H. Wang, K. Ferber, and Z. Liang, «Properties of Bulk Sintered Silver As a Function of Porosity,» Oak Ridge National Laboratory, 2012. En ligne : http://info.ornl.gov/sites, p.66

A. Czanderna, The Adsorption of Oxygen on Silver, The Journal of Physical Chemistry, vol.68, issue.10, pp.2765-2771, 1964.
DOI : 10.1021/j100792a005

H. Benett, R. Peck, D. Burge, and J. Benett, Formation and Growth of Tarnish on Evaporated Silver Films, Journal of Applied Physics, vol.3, issue.8, pp.3351-3360, 1969.
DOI : 10.1017/S0305004100011373

A. Hunsche and P. Neumann, Crack Nucleation in Persistent Slipbands, » American Society for Testing and Materials STP, vol.I, pp.26-38, 1988.
DOI : 10.1520/STP23208S

N. Li, Thèse de doctorat, Mécanismes de corrosion des couches mince d'argent en milieu sulfuré, 2012.

R. Riva, C. Buttay, M. Locatelli, V. Bley, and B. Allard, «Design and Manufacturing of a Double- Side Cooled, SiC based, High Temperature Inverter Leg,» High Temperature Electronics Conference (HiTEC), 2014.

H. Hofmann, Phénomène de Transfert -Cours Ecole Polytechnique fédérale de Lausanne

M. Rahaman, Ceramic Processing and Sintering, pp.448-462

P. Angelo and R. Subramanian, Powder Metallurgy, Science, Technology and Applications, Eastern Economy Edition, pp.134-145

P. Guiraldenq, «Diffusion dans les métaux,» Techniques de l'ingénieur, 1994.

P. Eyland, «Peter's Physics Pages,» En ligne

J. Kucera, «Self-Diffusion in Polycrystalline silver,» Czech, J. Phys, 1954.

G. Bai, ]. J. Grenet, B. E. Legendre, F. Wirth, C. Guitteny et al., Techniques de l'ingénieur, n° 1P1260 v3, 2014. [4] T. Maeder, «Introduction aux pâtes / encres de sérigraphie en technologie des couches épaisses (cours),» EPFL, 03 02 En ligne : http://lpm.epfl.ch/files/content/sites/lpm/files/shared/documents/couches_epaisses/base/En cres_serigraphie-introduction-080203.pdf, Temperature Sintering of Semiconductor Device InterconnectionDSC),» Techniques de l'ingénieur, n° 1P1205 v1Accès le Octobre 2015]. [5] « Institut für Angewandte Physik : Vapor pressure calculator,» En ligne Ceramic Integration and Joining Technologies: From Macro to Nanoscale, 2005.

M. Arjmand, C. Knee, H. Leion, T. Mattisson, C. J. Yi-hsin-pao et al., Revisited, «Standoff controlled interconnection». USA Brevet US 5931371 A, 16 Janvier 1996. [9] H. Charles et G. Clatterbaugh, «Solder Joint Reliability ? Design Implications From FiniteElement Modeling and Experimental Testing,» Journal of Electronic Packaging, pp.694-697, 1990.
DOI : 10.1002/aic.11753

T. Geoffroy, J. Riou, and E. Bailly, «Procédé d'assemblage par frittage d'argent sans pression», Brevet PCT, pp.15-2015

T. Baudin, Principe et cartographies d'orientations,» Techniques de l'ingénieur, n° 1M4138 v1, 2010.

A. Tilmatine, «Cours sur les matériaux diélectriques (chapitre 7),» En ligne : www.univsba .dz/fsi

N. Heuck, S. Müller, G. Palm, and A. , Bakin et A. Waag, «Swelling Phenomena in Sintered Silver Die Attach Structures at High Temperatures: Reliability Problems and Solutions for an Operation above 350°C, High Temperature Electronics Conference (HiTEC), 2010.

D. Uskokovic and H. Exner, The Kinetics of Contact Formation During Sintering by Diffusion Mechanisms, Science of Sintering, vol.3, issue.19, pp.256-303, 1977.
DOI : 10.1007/978-94-009-0741-6_8

R. E. Hoffman and D. Turnbull, «Lattice and Grain Boundary Self-Diffusion in Silver, Journal of Applied Physics, vol.22, issue.1634, 1951.

G. Antczak and G. Ehrlich, Surface Diffusion: Metals, Metal atoms and Clusters, pp.315-328, 2010.
DOI : 10.1017/CBO9780511730320

J. Kucera, «Self-Diffusion in Polycrystalline silver,» Czech, J. Phys, 1954.

J. Missiaen and S. Rolland, «Analyses Quantitative des Microstructures,» Cours de l'école doctorale I-MEP2

G. Matheron, Théorie des variables régionalisées et applications, 1970.

J. Missiaen and J. Chaix, The homogeneity of phase repartition in TiB2-Fe composites using variance and covariance analysis, Journal of Microscopy, vol.26, issue.26, pp.195-204, 1994.
DOI : 10.1002/cite.330260607

P. Patrick, «Détermination de la porosité de roches calcaires : méthode et incertitude de mesure,» Revue française de métrologie, pp.37-53, 2015.

S. L. Kang, Sintering: densification, grain growth and microstructure, pp.140-161, 2005.

M. N. Rahaman, Sintering of Ceramics, 2007.

D. François, «Essais mécaniques des métaux -Essais de dureté,» Techniques de l'ingénieur, n° 1M4160 v1, 2005.

W. Andrew, A. , V. Daniel, J. , W. Hsin et al., «Properties of Bulk Sintered SilverAsa Function of Porosity,» Juin 2102. En ligne : http://info.ornl.gov/sites

S. Meille and E. Garboczi, «Linear elastic properties of 2D and 3D models of porous materials made from elongated objects,» Modelling Simul, Mater. Sci. Eng, vol.9, pp.371-390, 2001.

A. Roberts and E. Garboczi, Elastic Properties of Model Porous Ceramics, Journal of the American Ceramic Society, vol.60, issue.7-8, p.3041, 2000.
DOI : 10.1115/1.3636446

X. Chen, «Plastic deformation of silver micro-wires under uniaxial tension (Mater thesis),» University of Hong-Kong, 2011.

P. Bompard and D. , François, «Effects of porosity on fatigue crack propagation in sintered nickel, chez International Conference on Fracture, 1984.

A. Teverovsky and . Task, Effect of Manual-Soldering-Induced Stresses on Ceramic Capacitors (Part I),» NASA Electronic Parts and Packaging (NEPP) Program, 2008.

R. Weglinski, «Highly Accelerated Stress Screeing for Air-Cooled Switching Power Supplies -Part I : Understand Stress Test Methodology,» 1 Février, En, vol.ligne, 2007.

A. Existent, Par exemple, [6] et [7] décrivent la formation de porosité de Kirkendall dans l'argent à proximité d'interfaces or-argent non poreux. Il n'y a aucune raison de penser que le même phénomène ne se produise pas dans de l

A. International and . Hanndbook, Alloy Phase Diagrams, p.34

F. Yu, R. W. Johnson, and M. Hamilton, «Pressureless low temperature sintering of microscale silver paste for die attach for 300°C applications, 2014.

N. Togasaki, Y. Okinaka, T. Hommaa, and T. Osaka, Preparation and characterization of electroplated amorphous gold???nickel alloy film for electrical contact applications, Electrochimica Acta, vol.51, issue.5, pp.882-887, 2005.
DOI : 10.1016/j.electacta.2005.04.057

M. Kato, K. Senda, Y. Mushab, J. S. , Y. Okinaka et al., Electrodeposition of amorphous gold alloy films, Electrochimica Acta, vol.53, issue.1, pp.11-15, 2007.
DOI : 10.1016/j.electacta.2007.01.045

I. Kaur, W. Gust, and L. Kozma, Handbook of Grain and Interphase Boundary Diffusion Data

N. Togasaki, Y. Okinaka, T. Hommaa, and T. Osaka, Preparation and characterization of electroplated amorphous gold???nickel alloy film for electrical contact applications, Electrochimica Acta, vol.51, issue.5, pp.882-887, 2005.
DOI : 10.1016/j.electacta.2005.04.057

M. Kato, K. Senda, Y. Mushab, J. Sasano, and Y. , Electrodeposition of amorphous gold alloy films, Electrochimica Acta, vol.53, issue.1, pp.11-15, 2007.
DOI : 10.1016/j.electacta.2007.01.045