M. N. Grigg, Thermo-oxidative degradation of polyamide 6, Thèse de doctorat, The School of Physical and Chemical Sciences Queensland University of Technology: Queensland, 2006.

J. M. Michel, Contribution à l'histoire industrielle des polymères en France, Société chimique de France, p.2012

C. S. Fuller, The investigation of synthetic linear polymers by X-Rays, Chemical reviews, pp.143-167, 1940.

E. Vinken, Polyamides: Hydrogen bondings, the Brill transition and superheated water, 2008.

J. L. Koenig, Infrared studies of chain folding in polymers, Journal of macromolecular science B, issue.2, pp.391-420, 1968.

C. W. Bunn and E. V. Garner, The Crystal Structures of Two Polyamides ('Nylons'), Proceedings of the royal society of London A, pp.18939-70, 1947.
DOI : 10.1098/rspa.1947.0028

A. Marcellan, Microstructures, micromécanismes et comportement à la rupture de fibres polyamide 66, Thèse de doctorat, 2003.

H. Haberkon, K. H. Illers, and P. Simak, Calorimetric X-ray and infra-red investigations on poly(hexamethylene adipamide), Polymer bulletin, pp.485-490, 1979.

R. Brill and Ü. Das-verhalten-von-polyamiden-beim-erhitzen, ??ber das Verhalten von Polyamiden beim Erhitzen, Journal f??r Praktische Chemie, vol.166, issue.1-3, pp.49-64, 1942.
DOI : 10.1002/prac.19421610104

J. E. Mark, Polymer Handbook Data, 1998.

E. W. Fisher, Studies of structure and dynamics of solid polymers by elastic and inelastic neutron scattering, Pure Appl. Chem, pp.501319-1341, 1978.

H. W. Starkweather-jr, J. F. Whiney, and D. R. Johnson, Crystalline order in nylon 66, Journal of Polymer Science Part A: General Papers, vol.1, issue.2, pp.715-723, 1963.
DOI : 10.1002/pol.1963.100010211

J. M. Haudin, Structures morphologiques des polymères semi-cristallins, Introduction à la mécanique des polymeres, Edité par G'Sell et, J.M.Haudin, pp.97-115, 1995.

J. H. Magil, Spherulites : A personal perspective, Journal of Materials Science, vol.36, issue.13, pp.3143-3164, 2001.
DOI : 10.1023/A:1017974016928

H. Ben and . Hamouda, Endommagement et fissuration en fluage de polyéthylène extrudés

L. Freire, Cristallisation d'un poly (hexaméthylène) adipamide, Ecole nationale supérieure des mines de Paris, 2011.

P. N. Thanki, C. Ramesh, and P. R. Singh, Photo-irradiation induced morphological changes in nylon 66, Polymer, vol.42, issue.2, pp.42-535, 2001.
DOI : 10.1016/S0032-3861(00)00374-8

M. I. Kohan, Nylon Plastics Handbook, 1995.

F. Khoury, The formation of negatively birefringent spherulites in polyhexamethylene adipamide (nylon 66) Polymer chemistry, pp.389-403, 1958.

A. R. De-anda and L. A. Fillot, Influence of the sorption of polar and non-polar solvents on the glass transition temperature of polyamide 6,6 Amorphous phase, Polymer engenireering and science, pp.2129-2135, 2011.

J. Brandrup and E. H. Immergut, Polymer Handbook third edition, 1989.

K. P. Pramoda and L. Tianxi, Effect of moisture on the dynamic mechanical relaxation of polyamide-6/clay nanocomposites, Journal of Polymer Science Part B: Polymer Physics, vol.78, issue.10, pp.42-1823, 2004.
DOI : 10.1002/polb.20061

A. Valles-lluch and W. Camacho, Influence of water on the viscoelastic behavior of recycled nylon 6,6, Journal of Applied Polymer Science, vol.76, issue.10, pp.852211-2218, 2002.
DOI : 10.1002/(SICI)1097-4628(20000509)76:6<851::AID-APP11>3.0.CO;2-D

A. Rios and . Anda, Influence of solvent sorption, additivation, and chemical modification on the molecular mobility dynamics of Polyamide 6,6 amorphous phase and its consequences on the tensile and impact strength properties of this polymer, Thèse de doctorat
URL : https://hal.archives-ouvertes.fr/tel-00933978

L. T. Lim and I. J. Britt, Sorption and transport of water vapor in nylon 6.6. film, Journal of applied polymer science, issue.2, pp.71-197, 1999.

R. Puffr and J. Sebenda, On the Structure and Properties of Polyamides. XXVII. The Mechanism of Water Sorption in Polyamides, Journal of Polymer Science Part C: Polymer Symposia, vol.29, issue.1, pp.1679-93, 1967.
DOI : 10.1135/cccc19640485

M. C. and S. K. Roy, Plastics Technology Handbook, 2007.

N. Avramova, Effect of the structure on sorption and diffusion processes in polyamide 6, part1: activation energy and thermodynamic parameters of water desorption in oriented and unoriented polyamide 6, Journal of applied polymer science, pp.106122-129, 2007.

H. W. Starkweather and J. R. Barkley, The effect of water on the secondary dielectric relaxations in nylon 66, Journal of Polymer Science: Polymer Physics Edition, vol.19, issue.8, pp.191211-1220, 1981.
DOI : 10.1002/pol.1981.180190804

G. Erhard, Designing with Plastics, 2006.
DOI : 10.3139/9783446412828.fm

L. C. Struik, The mechanical and physical ageing of semicrystalline polymers, Polymers, pp.1521-1533, 1987.

M. Takayanagi and K. Hoashi, Some Features of Viscoelastic Behavior and Crystalline Texture of Poly-?-olefins, Rept. Prog, Polymers Physics, issue.6, p.121, 1963.

R. Mendoza, Morphologies induites dans les pièces en polyolefine moulées par injection, Thèse de doctorat, Ecole Nationale Supérieure des Arts et Métiers, 2003.

M. J. Hill and A. Keller, Effect of shearing on crystallization, Journal of Macromolecular Science: Physics part B3, issue.1, 1969.

J. M. Haudin, Modeling of structure development during polymer processing, Polymer Science Series A, vol.39, issue.5, 2010.
DOI : 10.1021/ma0601215

URL : https://hal.archives-ouvertes.fr/hal-00574098

A. Keller and H. W. Kolnaar, Introductory lecture. Aspects of polymer gels, Faraday Discussions, vol.101, p.92, 1993.
DOI : 10.1039/fd9950100001

P. H. Lindenmeyer, The relationship between crystallization and deformation processes in crystalline high polymers, Polymer Engineering and Science, vol.34, issue.3, pp.1-157, 1964.
DOI : 10.1002/pen.760040305

A. J. Pennings, Fractionation of polymers by crystallization from solutions. II, Journal of Polymer Science Part C: Polymer Symposia, vol.51, issue.3, p.161799, 1967.
DOI : 10.1002/recl.19640830602

R. R. Lagasse and B. Maxwell, An experimental study of the kinetics of polymer crystallization during shear flow, Polymer Engineering and Science, vol.9, issue.3, p.16189, 1976.
DOI : 10.1016/B978-0-08-016915-6.50010-0

G. Kalay and M. J. Bevis, Processing and physical property relationships in injection-molded isotactic polypropylene. 2. morphology and crystallinity, Journal of Polymer Science Part B: Polymer Physics, vol.35, issue.2, pp.35-265, 1997.
DOI : 10.1002/(SICI)1099-0488(19970130)35:2<265::AID-POLB6>3.0.CO;2-R

F. Jay, J. M. Haudin, and B. Monasse, Shear-induced crystallization of polypropylenes: effect of molecular weight, Journal of material science, pp.34-2089, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00574876

D. R. Fitchmun and S. Newman, Shear induced beta form cristallisation in isotactic polypropylene, Journal of polymer science part A2, issue.8, 1970.

P. Avenas, J. B. Berhaut, J. M. Haudin, B. Monasse, F. Montheillet et al., La cristallisation et la mise en forme des polymères, édités par P, Avenas et J.M Haudin, 1978.

R. J. Barriault and L. F. Gronholz, Formation of spherulitic structure in polyhexamethylene adipamide (66 nylon). I. Structure and optical properties of spherulites at room temperature, Journal of Polymer Science, vol.18, issue.89, pp.18393-403, 1955.
DOI : 10.1002/pol.1955.120188908

N. Billon, C. Magnet, J. M. Haudin, and D. Lefebvre, Transcrystallinity effects in thin polymer films. Experimental and theorical approach, Colloid Polymers Science, pp.272633-654, 1994.

J. C. Won and B. Chabert, Etude de la cristallisation sous pression du polyamide 66 influence de la formulation, Thèse de doctorat, 1999.

A. J. Lovinger, J. O. Chua, and C. C. Gryte, Studies on the ?? and ?? forms of isotactic polypropylene by crystallization in a temperature gradient, Journal of Polymer Science: Polymer Physics Edition, vol.15, issue.4, pp.15641-656, 1977.
DOI : 10.1002/pol.1977.180150405

J. He and P. Zoller, Crystallization of polypropylene, nylon-66 and poly(ethylene terephthalate) at pressures to 200 MPa: Kinetics and characterization of products, Journal of Polymer Science Part B: Polymer Physics, vol.32, issue.6, pp.32-1049, 1994.
DOI : 10.1002/polb.1994.090320610

D. Walsh and P. Zoller, Standard Pressure Volume Temperature Data for Polymers, p.12, 1995.

R. Pantani, I. Coccorullo, V. Speranza, and G. Titomanlio, Modeling of morphology evolution in the injection molding process of thermoplastic polymers, Progress in polymer science, pp.301185-1222, 2005.

D. P. Russell and P. W. Beaumont, Structure and properties of injection-moulded nylon, p.6

D. P. Russell and P. W. Beaumont, Structure and properties of injection-moulded nylon, p.6

D. P. Russell and P. W. Beaumont, Structure and properties of injection-moulded nylon, p.6

L. Quintanilla, J. C. Rodriguez-cabello, T. Jawhari, and J. M. Pastor, Structural analysis of injection-moulded semi-crystalline polymers by Fourier transform infra-red spectroscopy with photoacoustic detection and differential scanning calorimetry. 1. Polyamide 6, 6, Polymer, pp.35-2321, 1994.

J. Karger-kocsis and K. Friedrich, Skin-core morphology and humidity effects on the fatigue crack propagation of PA-6.6, Plastics and rubber processing and applications, pp.1263-68, 1989.

S. Apichartpattanasiri, J. N. Hay, and S. N. Kukureka, A study of the tribological behavior of polyamide 66 with varying injection-moulding parameters, Wear, pp.251-1557, 2001.

D. Drummer and S. Meister, Correlation of Processing, Inner Structure, and Part Properties of Injection Moulded Thin-Wall Parts on Example of Polyamide 66, International Journal of Polymer Science, vol.1, issue.6, p.718926, 2014.
DOI : 10.1016/j.polymer.2005.02.096

E. Baquet, Modélisation thermomécanique visco-hyperélastique du comportement d'un polymère semi-cristallin : application au cas d'une matrice polyamide 6, 2011.

J. P. Trotignon, J. L. Lebrun, and J. Verdu, Crystalline polymorphism and orientation in injection-moulded polypropylene, Plastics and rubber processing and applications, pp.247-251, 1982.

V. S. Jackson, Morphology and properties of nylon 66: effects of injection moulding on structure and performance, 1973.

H. W. Starkweather, G. E. Moore, J. E. Hansen, T. M. Roder, and R. E. Brooks, Effect of crystallinity on the properties of nylons, Journal of Polymer Science, vol.21, issue.98, pp.189-204, 1956.
DOI : 10.1002/pol.1956.120219803

M. N. Bureau, J. Denault, K. C. Cole, and G. D. Enright, The role of crystallinity and reinforcement in the mechanical behavior of polyamide-6/clay nanocomposites, Polymer Engineering & Science, vol.36, issue.9, pp.42-1897, 2002.
DOI : 10.1002/pen.11082

T. J. Bessel, D. Hull, and J. B. Shortall, The effect of polymerization conditions and crystallinity on the mechanical properties and fracture of spherulitic nylon 6, Journal of Materials Science, vol.17, issue.7, pp.10-1127, 1975.
DOI : 10.1007/BF00541393

J. Rault, Les polymères solides, Cépaduès-éditions, p.45, 2002.

H. W. Starkweather and R. E. Brooks, Effect of spherulites on the mechanical properties of nylon 66, Journal of Applied Polymer Science, vol.1, issue.2, pp.236-239, 1959.
DOI : 10.1002/app.1959.070010214

V. Miri, O. Persyn, J. J. Lefebrve, and R. Seguela, Effect of water absorption on the plastic deformation behavior of nylon 6, European Polymer Journal, vol.45, issue.3, p.45757, 2009.
DOI : 10.1016/j.eurpolymj.2008.12.008

N. Billon, New constitutive modelling for time-dependant mechanical behavioour of polymers close to glass transition: fundamentals and experimental validation, Journal of applied polymer science, pp.1254390-4401, 2012.

A. Maurel-pantel, E. Baquet, J. Bikard, J. Bouvard, and N. Billon, A thermomechanical large deformation constitutive model for polymers based on materal network description : Application to a semi-crystalline polyamide 66, International Journal of Plasticity, pp.67-102, 2015.

F. Khoury, The formation of Negatively Birefringent Spherulites in Nylon 66, Journal of polymer science, pp.389-403, 1958.

C. G. Cannon and F. P. Chappel, Temperaure-dependence of birefringence of nylon 6.6 and the structure of spherulites, Journal of Textile Institute Transactions, pp.210-221, 1963.

N. S. Murthy, Z. Wang, and B. S. Hsiao, Interactions between crystalline and amorphous domains in semicrystalline polymers: SAXS studies of the brill transition in Nylon 6, Macromolecules, vol.6, pp.325594-5599, 1999.

T. Itoh, Change with Temperature in Crystal Structures of Nylons 6, 66 and 610, Japanese Journal of Applied Physics, vol.15, issue.12, p.152295, 1976.
DOI : 10.1143/JJAP.15.2295

A. Jonas, T. P. Russel, and D. Yoon, Synchrotron X-ray Scattering Studies of Crystallization of Poly(ether-ether-ketone) from the Glass and Structural Changes during Subsequent Heating-Cooling Processes, Macromolecules, vol.28, issue.25, pp.28-8491, 1995.
DOI : 10.1021/ma00129a005

R. Verma, H. Marand, and B. Hsiao, Morphological changes during second crystallization and subsequent melting in Peek as studied by real time SAXS, Macromolecules, pp.297767-7775, 1996.

G. Monge, Analyse calorimétrique à compensation de puissance, 2009.

G. Monge, ]. J. Poster, E. Brandrup, E. Immergut, P. Grulke et al., Centre de mise en forme des matériaux, Ecole Nationale Supérieure des Mines de Paris [10, 1999.

M. Inoue, Studies on crystallization of high polymers by differential thermal analysis, Journal of Polymer Science Part A: General Papers, vol.1, issue.8, pp.2697-2709, 1963.
DOI : 10.1002/pol.1963.100010813

H. H. Illers-k and . Simak-p, Calorimetric, X-ray and infra-red investigations on poly(hexamethylene adipamide), Polymer bulletin, pp.485-490, 1979.

B. Wunderlich, Macromolecular Physics. éditions A. Press, 1980.

K. Y. Kuhn-w and . J. Sichina-w, Reliable measurements of the nylon 6 glass transition made possible by the new dynamic DSC, Macromolecules, vol.28, pp.2644-2646, 1995.

K. Y. Kuhn-w, Measurement of crystalline index in nylons by DSC: complexities and recommendations, Journal of Polymer Science B, vol.35, pp.2219-2231, 1997.

H. P. Weidinger-a, On the determination of the crystalline fraction of polyethylenes from X-ray diffraction, Makromolekulare chemie, pp.44-68, 1961.

S. M. Zipper-p, The influence of different treatment media on the structure of PET fibers, Materials Research Innovations, vol.6, issue.2, pp.55-64, 2002.

M. N. Bray-r, C. S. , and M. R. , Drawing and annealing of nylon-6 fibres: studies of crystal growth, orientation of amorphous and crystalline domains and their influence on properties, Polymer, pp.36-3863, 1995.

H. P. Weidinger-a, Quantitative X-ray investigations on the crystallinity of cellulose fibers. A background analysis, Journal of Applied Physics, vol.19, issue.5, pp.491-506, 1948.

K. M. Kasai-n, X-ray diffraction by polymers, Kodansha Scientifc Books, 1972.

M. N. Minor-h, Analysis of poorly crystallized polymers using resolution enhanced X-ray diffraction scans, Polymer, pp.2499-2504, 1995.

H. H. Huisman-r and L. K. , Quantitative information from x-ray diffraction of nylon-6 yarns. I. Development of a model for analytical description of equatorial x-ray profile, Journal of polymer science ? polymer physics edition, pp.5-14, 1976.

M. L. Williams, R. F. Landel, and J. D. Ferry, The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming Liquids, Journal of the American Chemical Society, vol.77, issue.14, pp.3701-3707, 1955.
DOI : 10.1021/ja01619a008

E. Baquet, Modélisation thermomécanique visco-hyperélastique du comportement d'un polymère semi-cristallin : application au cas d'une matrice polyamide 6, 2011.

N. Temimi, Comportement thermo mécanique et rupture de polypropylènes, Thèse de doctorat Ecole Nationale Supérieure des Mines de Paris, 2006.

C. Ramesh, A. Keller, and S. J. Eltink, Studies on the crystallization and melting of nylon 66: 2. Crystallization behaviour and spherulitic morphology by optical microscopy, Polymer, vol.35, issue.24, pp.355293-5299, 1994.
DOI : 10.1016/0032-3861(94)90482-0

F. Khoury, The formation of negatively birefringent spherulites in polyhexamethylene adipamide (nylon 66) Polymer chemistry, pp.389-403, 1958.

A. I. Isayev, T. W. Chan, K. Shimojo, and M. Gmerek, Injection molding of semicrystalline polymers. I. Material characterization, Journal of Applied Polymer Science, vol.55, issue.5, pp.55807-819, 1995.
DOI : 10.1002/app.1995.070550518

Y. Xiaofeng, W. Hong, L. Jiang, G. Shaoyun, and Q. , Structure and property of injection-molded polypropylene along the flow direction, Polymer engineering and science, pp.703-712, 2009.

R. Mendoza, Morphologies induites dans les pièces en polyolefine moulées par injection, Thèse de doctorat, Ecole Nationale Supérieure des Arts et Métiers, 2003.

S. Lampman, Characterization and failure analysis of plastics, p.15, 2003.

T. A. Osswald, L. Turng, and P. J. Gramann, Injection Molding Handbook, 2002.

J. P. Trotignon, J. L. Lebrun, and J. Verdu, Crystalline polymorphism and orientation in injection-moulded polypropylene, Plastics and rubber processing and applications, pp.247-251, 1982.

L. Nasri, Une nouvelle contribution à la comprehension de mécanisme de rupture de fibres polyamide 6-6 à usages techniques et textiles, 2000.

N. Vasathan and D. R. Salem, Infrared spectroscopic characterization of oriented polyamide 66: band assigment and crystalinity measurement, Journal of polymer science: part B polymer physics, pp.33516-524, 2000.

L. Quintanilla, J. C. Rodriguez-cabello, T. Jawhari, and J. M. Pastor, Structural analysis of injection-moulded semi-crystalline polymers by Fourier transform infra-red spectroscopy with photoacoustic detection and differential scanning calorimetry. 1. Polyamide 6, 6, Polymer, pp.35-2321, 1994.

W. Qiu, A. Habenschuss, and B. Wunderlich, The phase structures of nylon 6.6 as studied by temperature-modulated calorimetry and their link to X-ray structure and molecular motion, Polymer, vol.48, issue.6, pp.481641-1650, 2007.
DOI : 10.1016/j.polymer.2007.01.024

J. C. Won and B. Chabert, Etude de la cristallisation sous pression du polyamide 66 influence de la formulation, Thèse de doctorat, 1999.

C. W. Bunn and E. V. Garner, The Crystal Structures of Two Polyamides ('Nylons'), Proceedings of the royal society of London A, pp.18939-70, 1947.
DOI : 10.1098/rspa.1947.0028

N. Murthy and H. Minor, Analysis of poorly crystallized polymers using resolution enhanced Xray diffraction scans, Polymer, pp.2499-2504, 1995.

A. Marcellan, Microstructures, micromécanismes et comportement à la rupture de fibres PA66 Thèse de doctorat, ENSMP, Sciences et génie des matériaux, 2003.

P. H. Hermans and A. Weidinger, On the determination of the crystalline fraction of polyethylenes from X-ray diffraction, Makromolekulare chemie, pp.44-68, 1961.

L. E. Alexander, X-ray diffraction methods in polymer science, Journal of Materials Science, vol.6, issue.1, 1969.
DOI : 10.1007/BF00550300

J. M. Herrera and . Martinez, Les mécanismes de fatigue dans les fibres thermoplastiques, Thèse de doctorat, 2004.

Q. Zhang, P. Fu, H. Zhang, and Z. Mo, Microstructure analysis of Nylon 66 by WAXD and SAXS, Chemical Research in Chinese universities, pp.18358-363, 2002.

H. Haberkorn, K. H. Illers, and P. Simak, Molecular ordering and crystallinity in polyhexamethylene adipamide, Colloid & Polymer Science, pp.257820-840, 1979.

R. Brill and Ü. Das-verhalten-von-polyamiden-beim-erhitzen, ??ber das Verhalten von Polyamiden beim Erhitzen, Journal f??r Praktische Chemie, vol.166, issue.1-3, pp.49-64, 1942.
DOI : 10.1002/prac.19421610104

B. S. Hsiao, A. D. Kennedy, R. A. Leach, B. Chu, and P. Harney, Studies of Structure and Morphology Development During the Heat-Draw Process of Nylon 66 Fiber by Synchrotron X-ray Diffraction and Scattering Techniques, Journal of Applied Crystallography, vol.30, issue.6, pp.30-1084, 1997.
DOI : 10.1107/S0021889897001842

H. W. Starkweather and G. A. Jones, Transition and relaxations, Nylon plastics handbook, p.139, 1995.

J. Hirschinger, H. Miura, K. H. Gardner, and A. D. English, Segmental dynamics in the crystalline phase of nylon 66: solid state deuterium NMR, Macromolecules, vol.23, issue.8, pp.23-2153, 1990.
DOI : 10.1021/ma00210a009

C. Ramesh, A. Keller, and S. J. Eltink, Studies of the crystallization and melting of nylon 66: 1. The dependence of the Brill transition on the crystallization temperature, Polymers, pp.352483-2488, 1994.

A. Y. Feldman, E. Watchel, G. B. Vaughan, A. Weinberg, and G. Marom, The Brill Transition in Transcrystalline Nylon-66, Macromolecules, vol.39, issue.13, pp.394455-4459, 2006.
DOI : 10.1021/ma060487h

A. Xenopoulos and B. Wunderlich, Conformational motion and disorder in aliphatic nylons. The case of nylon 6.6, Colloid & polymer science, pp.269375-391, 1991.

N. Murthy, Interactions between Crystalline and Amorphous Domains in Semicrystalline Polymers:?? Small-Angle X-ray Scattering Studies of the Brill Transition in Nylon 6,6, Macromolecules, vol.32, issue.17, pp.325594-5599, 1999.
DOI : 10.1021/ma990475e

H. W. Starkweather, Deconvolution of the excess heat capacity of the Brill transition in nylon 66, Macromolecules, vol.22, issue.4, p.222000, 1989.
DOI : 10.1021/ma00194a079

S. Fakirov, E. W. Fisher, R. Hoffmann, and G. F. Schmidt, Structure and properties of poly(ethylene terephthalate) crystallized by annealing in the highly oriented state: 2. Melting behaviour and the mosaic block structure of the crystalline layers, Polymer, vol.18, issue.11, pp.18-1121, 1977.
DOI : 10.1016/0032-3861(77)90105-7

L. T. Lim and I. J. Britt, Sorption and transport of water vapor in nylon 6.6. film, Journal of applied polymer science, issue.2, pp.71-197, 1999.

A. R. De-anda and L. A. Fillot, Influence of the sorption of polar and non-polar solvents on the glass transition temperature of polyamide 6,6 Amorphous phase, Polymer engenireering and science, pp.2129-2135, 2011.

A. Launay, Y. Marco, H. Maitournam, and I. Raoult, Modelling the influence of temperature and relative humidity on the time-dependent mechanical behavior of a short glass fibre reinforced polyamide, Mechanics of materials, pp.561-571, 2013.

A. Valles-lluch and W. Camacho, Influence of water on the viscoelastic behavior of recycled nylon 6,6, Journal of Applied Polymer Science, vol.76, issue.10, pp.852211-2218, 2002.
DOI : 10.1002/(SICI)1097-4628(20000509)76:6<851::AID-APP11>3.0.CO;2-D

H. W. Starkweather, The effect of water on the secondary dielectric relaxations in nylon 66, Journal of Polymer Science: Polymer Physics Edition, vol.19, issue.8, pp.1211-1220, 1981.
DOI : 10.1002/pol.1981.180190804

C. I. Chung and J. A. Sauer, Low-temperature mechanical relaxations in polymers containing aromatic groups, Journal of Polymer Science Part A-2: Polymer Physics, vol.9, issue.6, pp.1097-1115, 1971.
DOI : 10.1002/pol.1971.160090607

J. Varlet, J. Y. Cavaille, J. Perez, and G. P. Johari, Dynamic mechanical spectrometry of nylon-12, Journal of Polymer Science Part B: Polymer Physics, vol.28, issue.13, pp.28-2691, 1990.
DOI : 10.1002/polb.1990.090281315

D. C. Prevorsek, R. H. Butler, and H. K. Reimschuessel, Mechanical relaxations in polyamides, Journal of Polymer Science Part A-2: Polymer Physics, vol.9, issue.5, pp.867-886, 1971.
DOI : 10.1002/pol.1971.160090508

V. Fabre, Etude de l'endommagement en fatigue d'un composite thermoplastique à fibres courtes : cas du polyamide 6,6 renforcé de fibres de verre courtes, thèse de doctorat à l'école doctorale sciences des métiers de l'ingénieur (SMI) Paris, p.2015

J. Brandrup, E. H. Immergut, and E. A. Grulke, Polymer handbook, 1999.

D. W. Hadley, I. M. Ward, and J. Ward, The Transverse Compression of Anisotropic Fibre Monofilaments, Proceedings of the royal society of London A, pp.285275-286, 1965.
DOI : 10.1098/rspa.1965.0103

S. Bai, C. G. Sell, J. Hiver, C. Mathieu, and P. , Polypropylene/polyamide 6/polyethylene-octene elastomer blends. Part 3. Mechanisms of volume dilatation during plastic deformation under uniaxial tension, Polymer, vol.46, issue.17, pp.466347-6446, 2005.
DOI : 10.1016/j.polymer.2005.03.111

A. Pawlak and A. Galeski, Plastic Deformation of Crystalline Polymers:?? The Role of Cavitation and Crystal Plasticity, Macromolecules, vol.38, issue.23, pp.9688-9697, 2005.
DOI : 10.1021/ma050842o

A. Galeski, A. S. Argon, and R. E. Cohen, Changes in the morphology of bulk spherulitic nylon 6 due to plastic deformation, Macromolecules, vol.21, issue.9, pp.2761-2770, 1988.
DOI : 10.1021/ma00187a021

A. Rozanski and A. Galeski, Controlling Cavitation of Semicrystalline Polymers during Tensile Drawing, Macromolecules, vol.44, issue.18, pp.447273-7287, 2011.
DOI : 10.1021/ma201090z

A. Y. Feldman, E. Watchel, G. B. Vaughan, A. Weinberg, and G. Marom, The Brill Transition in Transcrystalline Nylon-66, Macromolecules, vol.39, issue.13, pp.394455-4459, 2006.
DOI : 10.1021/ma060487h

H. J. Biangardi, Brill transition of polyamide 6.12, Journal of Macromolecular Science, Part B, vol.29, issue.2, pp.29139-153, 1990.
DOI : 10.1080/00222349008245770

C. Ramesh, New crystalline transitions in Nylons 4,6 6,10, and 6,12 using high temperature Xray diffraction studies, Macromolecules, pp.323721-3726, 1999.

F. J. Hybart and J. D. Platt, The melting of 66 nylon: Observations by differential thermal analysis, Journal of Applied Polymer Science, vol.11, issue.8, pp.1449-1460, 1967.
DOI : 10.1002/app.1967.070110808

N. A. Jones, E. D. Atkins, M. J. Hill, S. J. Cooper, and L. Franco, Chain-folded lamellar crystals of aliphatics polyamides, Polymers, pp.38-2689, 1997.

L. Quintanilla, J. C. Rodriguez-cabello, T. Jawhari, and J. M. Pastor, Structural analysis of injection-moulded semi-crystalline polymers by Fourier transform infra-red spectroscopy with photoacoustic detection and differential scanning calorimetry. 1. Polyamide 6, 6, Polymer, pp.35-2321, 1994.

N. Vasathan and D. R. Salem, Infrared spectroscopic characterization of oriented polyamide 66: band assigment and crystalinity measurement, Journal of polymer science: part B polymer physics, pp.33516-524, 2000.

H. Mitomo and K. Nakazato, Lamellar thickening behavior of nylon-6,6 crystal by annealing, Polymer, pp.1427-1432, 1978.

L. A. Baldenegro-perez, D. Navarro-rodriguez, F. J. Medellin-rodriguez, B. Hsiao, C. A. Avila-orta et al., Molecular weight and crystallization temperature effects on poly(ethylene terephthalate) (PET) homopolymers, an isothermal crystallization analysis, Polymers, pp.583-600, 2014.

S. X. Liu and P. Cebe, Effects of Molecular Weight on the Structure of Poly(phenylene sulfide) Crystallized at Low Temperatures, Macromolecules, vol.30, issue.20, pp.306243-6250, 1997.
DOI : 10.1021/ma961600e

L. H. Tung and S. Buckser, The Effects of Molecular Weight on the Crystallinity of Polyethylene, The Journal of Physical Chemistry, vol.62, issue.12, pp.621530-1534, 1958.
DOI : 10.1021/j150570a015

G. Rusu, K. Ueda, E. Rusu, and M. Rusu, Polyamides from lactams by centrifugal molding via anionic ring-opening polymerization, Polymers, pp.425669-5678, 2001.

T. D. Fornes and D. R. Paul, Crystallization behavior of nylon 6 nanocomposites, Polymer, vol.44, issue.14, pp.443945-3961, 2003.
DOI : 10.1016/S0032-3861(03)00344-6

Y. Liu, Y. Zhang, G. Zhang, M. Yang, S. Yan et al., Influence of thermal processing on the perfection of crystals in polyamide 66 and polyamide 66/clay nanocomposites, Polymer, vol.45, issue.26, pp.458999-9009, 2004.
DOI : 10.1016/j.polymer.2004.10.025

T. Murayama and B. Silverman, Dynamic mechanical properties of high molecular weight nylon 66 fiber, Journal of Polymer Science: Polymer Physics Edition, vol.11, issue.10, pp.1873-1878, 1973.
DOI : 10.1002/pol.1973.180111002

C. Millot, Multi-scale characterization of deformation mechanisms of bulk polyamide 6 under tensile stretching below and above the glass transition, Thèse de doctorat, Institut National des Sciences Appliquées de Lyon, p.2015
URL : https://hal.archives-ouvertes.fr/tel-01207840