L. Josserand, O. Coussy, and F. De-larrard, Bleeding of concrete as an ageing consolidation process, Cement and Concrete Research, 2006.

T. Powers, The Bleeding of Portland Cement Paste, Mortar and Concrete Treated as a Special Case of Sedimentation, 1939.

C. K. Loh, T. S. Tan, K. Y. Yong, and T. H. Wee, An experimental study on bleeding and channelling of cement paste and mortar Advances in cement research, pp.1-1, 1998.

G. Giaccio and A. Giovambattista, Bleeding: Evaluation of its effects on concrete behaviour, Matérials and structures (RILEM) v112, pp.265-71, 1986.
DOI : 10.1007/BF02472109

P. J. Wainright, H. Ait, and . Aider, The influence of cement source and slag additions on the bleeding of concrete, Cement and concrete research, pp.7-1445

L. Josserand, Ressuage des bétons hydrauliques, 2002.

H. Steinour, Further Studies of The Bleeding of Portland Cement Paste, 1945.

T. Tan, T. Wee, S. Tan, C. Tam, and S. Lee, A consolidation model for bleeding of cement paste, Advances in Cement Research, vol.1, issue.1, pp.18-26, 1987.
DOI : 10.1680/adcr.1987.1.1.18

M. Yang, C. Neubauer, and H. Jennings, Interparticle Potential and Sedimentation Behaviour of Cement Suspensions, Review and Results From Paste, Advanced Cement Based Materials, vol.5, issue.1, pp.1-7, 1997.

V. Picandet, D. Rangeard, A. Perrot, and T. Lecompte, Permeability measurement of fresh cement paste, Cement and Concrete Research, pp.330-338, 2011.

C. K. Loh, T. S. Tan, K. Y. Yong, and T. H. Wee, An experimental study on bleeding and channelling of cement paste and mortar, Advances in Cement Research, 1998.

A. Azzi, C. Djelal, Y. Vanhove, H. Kada, and O. Madec, Influence des paramètres de formulation du béton sur les pathologies des parois moulées, p.1167733, 2015.

J. Hot, Influence des polymères de type superplastifiants et agents entraineurs d'air sur la viscosité macroscopique des matériaux cimentaires, Thèse de doctorat, 2013.

A. Perrot, T. Lecompte, H. Khelifi, C. Brumaud, J. Hot et al., Yield stress and bleeding of fresh cement pastes, Cement and Concrete Research, vol.42, issue.7, pp.42-49, 2012.
DOI : 10.1016/j.cemconres.2012.03.015
URL : https://hal.archives-ouvertes.fr/hal-00767818

P. Coussot and C. Ancey, Rheophysical classification of concentrated suspensions and granular pastes, Physical Review E, vol.41, issue.4, pp.4445-4457, 1999.
DOI : 10.1017/S0022112070000745

K. L. Scrivener, R. Snellings, and B. Lothenbach, A practical guide to microstructure analysis of cementitious materials, pp.22-2015

M. Michel, accélération de ciment au laitier par du ciment sulfo-alumineux , thèse de doctorat, 2009.

J. W. Bullard, H. M. Jennings, R. A. Livingston, A. Nonat, G. W. Scherer et al., Mechanisms of cement hydration, Cement and Concrete Research, vol.41, issue.12, pp.1208-1223, 2011.
DOI : 10.1016/j.cemconres.2010.09.011

N. Roussel, G. Ovarlez, S. Garrault, and C. Brumaud, The origins of thixotropy of fresh cement pastes, Cement and Concrete Research, pp.148-157, 2012.

T. Hansen, Physical structure of hardened cement paste. A classical approach, Materials and Structures, vol.53, issue.8/9, 1986.
DOI : 10.1007/BF02472146

. Metha, Concrete structure, properties, and materials, p.450, 1986.

M. Eriksson, T. Dalmalm, M. Brantberger, and H. Stille, Separations-och filtreringsstabilitet hos cementbaserade injekteringsmedel, Kungliga Tekniska Högskolan, Avd för Jord-och bergmekanik, 1999.

S. Soga, K. Takagi, and A. Kimura, Influence of the mixing energy on fresh concrete, Transactions of the japan concrete institute, pp.73-80, 1986.

E. Bielak, Testing of cement, cement paste and conrete, including bleeding -part 1 : Laboratory test, Colloque de Hannovre -properties of fresh concrete, pp.154-166, 1990.

P. Schiessl and J. W. Weber, Bleeding of concrete, Iberoamerican R.M.C. congress, congress report section XII, pp.23-26, 1992.

T. C. Power, The properties of fresh concrete, Pages, pp.533-652, 1968.

S. Suhr and W. Schöner, Bleeding of cement paste, Colloque de Hannovre -properties of fresh concrete, Pages, pp.33-40, 1990.

P. Coussot, Rheometry of Pastes, Suspensions and Granular Materials?Application in Industry and Environment Wiley, 2005.

N. Roussel and P. Coussot, Ecoulements d'affaissement et d'??talement. Mod??lisation, analyse et limites pratiques, Revue europ??enne de g??nie civil, vol.10, issue.1, 2006.
DOI : 10.3166/regc.10.25-44

N. Roussel, Rheology of fresh concrete: from measurements to predictions of casting processes Issue: 10 Pages, Materials and Structures, pp.40-1001, 2007.

Q. D. Nguyen and D. V. Boger, Direct yield stress measurement with the vane method, J. Rheol, vol.29, pp.335-347, 1985.

J. Spangenberg, N. Roussel, J. H. Hattel, H. Stang, J. Skocek et al., Flow induced particle migration in fresh concrete: Theoretical frame, numerical simulations and experimental results on model fluids, Cement and Concrete Research, vol.42, issue.4, pp.42-633, 2012.
DOI : 10.1016/j.cemconres.2012.01.007

H. Hafid, G. Ovarlez, F. Toussaint, P. H. Jezequel, and N. Roussel, Assessment of potential concrete and mortar rheometry artifacts using magnetic resonance imaging, Cement and Concrete Research, vol.71, pp.71-100, 2015.
DOI : 10.1016/j.cemconres.2015.01.009

F. Mahaut, S. Mokeddem, X. Chateau, N. Roussel, and G. Ovarlez, Effect of coarse particle volume fraction on the yield stress and thixotropy of cementitious materials, Cement and Concrete Research, vol.38, issue.11, p.38
DOI : 10.1016/j.cemconres.2008.06.001

N. Roussel, A thixotropy model for fresh fluid concretes: Theory, validation and applications, Cement and Concrete Research, Volume: 36 Issue: 10 Pages, pp.1797-1806, 2006.

G. Ovarlez and N. Roussel, A physical model for the prediction of lateral stress exerted by self-compacting concrete on formwork, Materials and Structures, issue.2, pp.39-269, 2006.

L. Graubner, K. H. Keller, D. Khayat, A. F. Lange, A. Omran et al., Vanhove, Field validation of models for predicting lateral form pressure exerted by SCC, Cement & Concrete Composites, pp.54-70, 2014.

J. C. Tchamba, S. Amziane, G. Ovarlez, and N. Roussel, Lateral stress exerted by fresh cement paste on formwork: Laboratory experiments, Cement and Concrete Research, vol.38, issue.4, pp.38-459, 2008.
DOI : 10.1016/j.cemconres.2007.11.013

Y. Peng and S. Jacobsen, Influence of water/cement ratio, admixtures and filler on sedimentation and bleeding of cement paste, Cement and Concrete Research, pp.133-142, 2013.

L. Reiter, T. Wangler, N. Roussel, and R. Flatt, Distinguishing flocculation and hydration effects on the thixotropy of cement pastes

M. C. Garci-juenger and H. M. Jennings, New insights into the effects of sugar one the hydration and microstructure of cement pastes, Cement and Concrete Research, pp.32393-399, 2002.

S. Caré, R. Linder, V. Baroghel-bouny, F. De-larrard, and Y. Charonnat, Effet des additions minérales sur les propriétés d'usage des bétons, Plan d'expérience et analyse statistique, 2000.

F. T. Olorunsogo, Particles size distribution of GGBS and bleeding characteristics of slag cement mortars, Cement and concrete research, pp.28-907, 1998.

P. J. Wainright and H. A. Aider, The influence of cement source and slag additions on the bleeding of concrete, Cement and concrete research, pp.25-32, 1995.

Z. Tan, G. De-schutter, G. Ye, Y. Gao, and L. Machiels, Influence of particle size on the early hydration of slag particle activated by Ca(OH)2 solution, Construction and Building Materials, vol.52, pp.52-488, 2014.
DOI : 10.1016/j.conbuildmat.2013.11.073

J. Pera, S. Husson, and B. Guilhot, Influence of finely ground limestone on cement hydration, Cement and Concrete Composite, pp.99-105, 1999.

M. Regourd, B. Mortureux, and H. Hornain, Liaison pâte de ciment-filler dans les ciments composés, Colloque international Liaisons pâtes de ciment matériaux associés, pp.17-19, 1982.

P. J. Monteiro and P. K. Mehta, Interaction between carbonate rock and cement paste, Cement and concrete research, Volume : 16 Issue, pp.127-134, 1986.
DOI : 10.1016/0008-8846(86)90128-6

F. De-larrard and C. Ferraris, Rhéologie du béton frais remanié : Plan expérimental et dépouillement des résultats, Bulletin des laboratoires des ponts et chaussées n°213, pp.73-89, 1998.

K. Scrivener, R. Snellings, and B. Lothenbach, A Practical Guide to Microstructural Analysis of Cementitious Materials , chapitre 10, pp.445-449, 2016.

A. Draganovic? and D. , Bleeding and filtration of cement-Based grout, Thèse de doctorat, Division of soil and rock mechanics department of civil and architectural engineering, Royal institute of technology, 2009.

M. Hoshino, Relationship between bleeding, coarse aggregate, and specimen height of concrete, A.C.I. Materials journal, issue.2, pp.185-190, 1989.

C. A. Clear and D. G. Bonner, Settlement of fresh concrete -an effective stress model, magazine of concrete research, pp.40-142, 1988.

S. Soga, K. Takagi, and A. Kimura, Influence of the mixing energy on fresh concrete, Transactions of the japan concrete institute, pp.73-80, 1986.

J. Hot, Influence des polymères de type superplastifiants et agents entraineurs d'air sur la viscosité macroscopique des matériaux cimentaires, Thèse de doctorat, 2013.

H. Bessaies-bey, Polymères et propriétés rhéologiques d'une pâte de ciment : une approche physique générique, Thèse de doctorat, 2015.

B. Chouinard, Etude des relations entre la rhéologie du béton et sa pompabilité, Mémoir pour l'obtention du grade de maitre en sciences, 1999.

K. Dong, R. Yang, R. Zou, and A. Yu, Role of Interparticle Forces in the Formation of Random Loose Packing, Physical Review Letters, vol.9, issue.14, pp.96-145505, 2006.
DOI : 10.1103/PhysRevLett.92.258303

V. Picandet, D. Rangeard, A. Perrot, and T. Lecompte, Permeability measurement of fresh cement paste, Cement and Concrete Research, pp.330-338, 2011.

J. Baruchel, J. Y. Buffière, E. Maire, P. Merle, and G. , Peix, X-ray tomography in material science, 2000.

E. Maire, L. Salvo, P. Cloetens, and M. , Tomographie à rayons X appliquée à l'étude des matériaux, p.1, 2004.

P. Cloetens, M. Pateyron-salomé, and J. Y. Buffière, Observation of microstructure and damage in materials by phase sensitive radiography and tomography, Journal of Applied Physics, vol.40, issue.9, pp.5878-5887, 1997.
DOI : 10.1016/0956-7151(92)90396-V
URL : https://hal.archives-ouvertes.fr/hal-01668836

L. Josserand, Ressuage des bétons hydrauliques, 2002.

M. Sawaide and J. Iketani, Rheological analysis of the behavior of bleed water from freshly cast mortar and concrete, A.C.I, Materials Journal, pp.89-323, 1992.

T. C. Power, The properties of fresh concrete, Pages, pp.533-652, 1968.

K. H. Khayat and Z. Guizani, Use of viscosity-modifying admixture to enhance stability of fluid concrete, A.C.I. Materials journal, pp.94-332, 1997.

F. T. Olorunsogo, Particles size distribution of GGBS and bleeding characteristics of slag cement mortars, Cement and concrete research, pp.28-907, 1998.

G. Giaccio and A. Giovambattista, Bleeding: Evaluation of its effects on concrete behaviour, Matérials and structures (RILEM) v112, pp.265-71, 1986.
DOI : 10.1007/BF02472109

G. Ovarlez and N. Roussel, A physical model for the prediction of lateral stress exerted by selfcompacting concrete on formwork, Materials and Structures, issue.2, p.39

H. Bessaies-bey, Polymères et propriétés rhéologiques d'une pâte de ciment : une approche physique générique, Thèse de doctorat, 2015.

H. Steinour, Further Studies of The Bleeding of Portland Cement Paste, 1945.

H. F. Taylor, Cement chemistry, 1990.
DOI : 10.1680/cc.25929

J. Dils, V. Boel, and G. D. Schutter, Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC, Construction and Building Materials, vol.41, pp.41-455, 2013.
DOI : 10.1016/j.conbuildmat.2012.12.050

J. Hot, Influence des polymères de type superplastifiants et agents entraineurs d'air sur la viscosité macroscopique des matériaux cimentaires, Thèse de doctorat, 2013.

J. Pera, S. Husson, and B. Guilhot, Influence of finely ground limestone on cement hydration, Cement and Concrete Composite, pp.99-105, 1999.

K. Bilba, M. A. Arsene, and A. Ouensanga, Sugar cane bagasse fibre reinforced cement composites. Part I. Influence of the botanical components of bagasse on the setting of bagasse/cement composite, Cement and Concrete Composites, vol.25, issue.1, pp.25-26, 2003.
DOI : 10.1016/S0958-9465(02)00003-3
URL : https://hal.archives-ouvertes.fr/hal-00809715

K. Scrivener, R. Snellings, and B. Lothenbach, A Practical Guide to Microstructural Analysis of Cementitious Materials , chapitre 10, pp.445-449, 2016.

K. Yoshioka, E. Sakai, M. Daimon, and A. Kitahar, Role of Steric Hindrance in the Performance of Superplasticizers for Concrete, Pages, pp.80-2667, 1997.
DOI : 10.2472/jsms.29.240

K. L. Scrivener, R. Snellings, and B. Lothenbach, A practical guide to microstructure analysis of cementitious materials, pp.22-2015

L. Josserand, O. Coussy, and F. De-larrard, Bleeding of concrete as an ageing consolidation process, Cement and Concrete Research, 2006.

N. Roussel, A. Lemaître, R. J. Flatt, and P. Coussot, Steady state flow of cement suspensions: A micromechanical state of the art, Cement and Concrete Research, vol.40, issue.1, pp.77-84, 2010.
DOI : 10.1016/j.cemconres.2009.08.026
URL : https://hal.archives-ouvertes.fr/hal-00622810

N. Roussel, G. Ovarlez, S. Garrault, and C. Brumaud, The origins of thixotropy of fresh cement pastes, Cement and Concrete Research, pp.148-157, 2012.

N. Roussel, Rheology of fresh concrete: from measurements to predictions of casting processes Issue: 10 Pages, Materials and Structures, pp.40-1001, 2007.

. Coussot, Rheometry of Pastes, Suspensions and Granular Materials?Application in Industry and Environment Wiley, 2005.

P. Coussot and C. Ancey, Rheophysical classification of concentrated suspensions and granular pastes, Physical Review E, vol.41, issue.4, pp.4445-4457, 1999.
DOI : 10.1017/S0022112070000745

P. J. Monteiro and P. K. Mehta, Interaction between carbonate rock and cement paste, Cement and concrete research, Volume : 16 Issue, pp.127-134, 1986.
DOI : 10.1016/0008-8846(86)90128-6

P. J. Wainright and H. A. Aider, The influence of cement source and slag additions on the bleeding of concrete, Cement and concrete research, pp.25-32, 1995.

J. W. Schiessl and . Weber, Bleeding of concrete, Iberoamerican R.M.C. congress, congress report section XII, pp.23-26, 1992.

C. A. Grampeix, L. Graubner, K. H. Keller, D. Khayat, A. F. Lange et al., Vanhove, Field validation of models for predicting lateral form pressure exerted by SCC, Cement & Concrete Composites, pp.54-70, 2014.

P. J. Wainright and H. A. Aider, The influence of cement source and slag additions on the bleeding of concrete, Cement and concrete research, pp.7-1445

Q. D. Nguyen and D. V. Boger, Direct yield stress measurement with the vane method, J. Rheol, vol.29, pp.335-347, 1985.

R. D. Browne and P. B. Bamfonh, Tests to Eslablish Concrete Pumpability, Journal of American Concrete Institute, pp.74-193, 1977.

R. J. Flatt, Dispersion forces in cement suspensions, Cement and Concrete Research, pp.399-408, 2004.

R. J. Flatt, Towards a prediction of superplasticized concrete rheology, Mater.Struct, vol.27, pp.289-300, 2004.

S. Soga, K. Takagi, and A. Kimura, Influence of the mixing energy on fresh concrete, Transactions of the japan concrete institute, pp.73-80, 1986.

S. Suhr and W. Schöner, Bleeding of cement paste, Colloque de Hannovre -properties of fresh concrete, Pages, pp.33-40, 1990.

S. Caré, R. Linder, V. Baroghel-bouny, F. De-larrard, and Y. Charonnat, Effet des additions minérales sur les propriétés d'usage des bétons