L. A. Utracki, Introduction to polymer blends, Polymer Blends Handbook, pp.1-96, 2002.
DOI : 10.1007/0-306-48244-4_1

P. J. Flory, Thermodynamics of High Polymer Solutions, The Journal of Chemical Physics, vol.9, issue.8, pp.660-660, 1941.
DOI : 10.1039/TF9403500619

M. L. Huggins, Solutions of Long Chain Compounds, The Journal of Chemical Physics, vol.9, issue.5, pp.440-440, 1941.
DOI : 10.1002/hlca.194002301130

M. Rubinstein and R. H. Colby, Polymer Physics, 2003.

C. M. Hansen, The Universality of the Solubility Parameter, Industrial & Engineering Chemistry Product Research and Development, vol.8, issue.1, pp.2-11, 1969.
DOI : 10.1021/i360029a002

R. F. Fedors, A method for estimating both the solubility parameters and molar volumes of liquids, Polymer Engineering and Science, vol.62, issue.2, pp.147-154, 1974.
DOI : 10.1002/recl.19600790803

R. Lauchlan and G. Shaw, Thermoplastic resin blend of polyphenylene oxide with butadienecontaining polymers

T. Ougizawa and T. Inoue, UCST and LCST Behavior in Polymer Blends and Its Thermodynamic Interpretation, Polymer Journal, vol.34, issue.7, pp.521-527, 1986.
DOI : 10.1007/BF00256507

P. Pötschke and D. R. Paul, Formation of Co-continuous Structures in Melt-Mixed Immiscible Polymer Blends, Journal of Macromolecular Science, Part C: Polymer Reviews, vol.37, issue.1, pp.87-141, 2003.
DOI : 10.1002/masy.19900380105

C. E. Scott and C. W. Macosko, Morphology development during the initial stages of polymer-polymer blending, Polymer, vol.36, issue.3, pp.461-470, 1995.
DOI : 10.1016/0032-3861(95)91554-K

J. Lee and C. Han, Evolution of a dispersed morphology from a co-continuous morphology in immiscible polymer blends, Polymer, vol.40, issue.10, pp.2521-2536, 1999.
DOI : 10.1016/S0032-3861(98)00496-0

J. K. Lee and C. D. Han, Evolution of polymer blend morphology during compounding in a twin-screw extruder, Polymer, vol.41, issue.5, pp.1799-1815, 2000.
DOI : 10.1016/S0032-3861(99)00325-0

G. I. Taylor, The Formation of Emulsions in Definable Fields of Flow, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.146, issue.858, pp.501-523, 1934.
DOI : 10.1098/rspa.1934.0169

H. P. Grace, DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMS, Chemical Engineering Communications, vol.10, issue.3-6, pp.3-6, 1982.
DOI : 10.1002/aic.690150512

L. A. Utracki, The Rheology of Multiphase Systems, Rheological Fundamentals of Polymer Processing, pp.113-137, 1995.
DOI : 10.1007/978-94-015-8571-2_5

R. A. De-bruijn, Deformation and breakup of drops in simple shear flows, 1989.

B. D. Favis and J. P. Chalifoux, The effect of viscosity ratio on the morphology of polypropylene/polycarbonate blends during processing, Polymer Engineering and Science, vol.23, issue.21, pp.1591-1600, 1987.
DOI : 10.1098/rspa.1954.0228

G. Serpe, J. Jarrin, and F. Dawans, Morphology-processing relationships in polyethylene-polyamide blends, Polymer Engineering and Science, vol.26, issue.9, pp.553-565, 1990.
DOI : 10.1007/978-1-4899-3063-7

S. Wu, Formation of dispersed phase in incompatible polymer blends: Interfacial and rheological effects, Polymer Engineering and Science, vol.40, issue.5, pp.335-343, 1987.
DOI : 10.1098/rspa.1954.0228

A. I. Isayev and S. Palsule, Encyclopedia of Polymer Blends, 2016.

J. N. Clark, J. S. Higgins, and D. G. Peiffer, Reduction in domain size in polymer mixtures via charge transfer interactions, Polymer Engineering and Science, vol.25, issue.1, pp.49-56, 1992.
DOI : 10.1007/978-94-009-3829-8_15

I. Mount and . Em, Control of Dispersed Polymer Domain Size Formation in Melt Processing, 2007.

F. Mighri, P. J. Carreau, and A. Ajji, Influence of elastic properties on drop deformation and breakup in shear flow, Journal of Rheology, vol.42, issue.6, pp.1477-1490, 1998.
DOI : 10.1122/1.550897

C. W. Macosko, Morphology development and control in immiscible polymer blends, Macromolecular Symposia, vol.149, issue.1, pp.171-184, 2000.
DOI : 10.1002/1521-3900(200001)149:1<171::AID-MASY171>3.0.CO;2-8

J. Dooley and H. Tung, Coextrusion, Encyclopedia of Polymer Science and Technology, 2002.
DOI : 10.3139/217.910255

E. Mitsoulis, Multilayer sheet coextrusion: Analysis and design, Advances in Polymer Technology, vol.8, issue.3, pp.225-242, 1988.
DOI : 10.1002/adv.1988.060080302

J. Schrenk, Method for multilayer coextrusion, 1973.

W. J. Schrenk, R. K. Shastri, R. E. Ayres, and D. J. Gosen, Methods and apparatus for generating interfacial surfaces, US5094793 A, 1992.

J. E. Tollar, Interfacial surface generator, 1966.

J. W. Appeldoorn and R. Sluijters, Mixing apparatus, 1972.

W. J. Schrenk, R. K. Shastri, R. F. Ayres, and D. J. Gosen, Interfacial surface generator, US5094788 A, 1992.

M. Ma, K. Vijayan, A. Hiltner, E. Baer, and J. Im, Thickness effects in microlayer composites of polycarbonate and poly(styrene-acrylonitrile), Journal of Materials Science, vol.10, issue.4, pp.2039-2046, 1990.
DOI : 10.1007/BF01045761

C. D. Mueller, S. Nazarenko, T. Ebeling, T. L. Schuman, A. Hiltner et al., Novel structures by microlayer coextrusion?talc-filled PP, PC/SAN, and HDPE/LLDPE, Polymer Engineering & Science, vol.25, issue.2, pp.355-362, 1997.
DOI : 10.1002/pen.11678

C. Mueller, V. Topolkaraev, D. Soerens, A. Hiltner, and E. Baer, Breathable polymer films produced by the microlayer coextrusion process, Journal of Applied Polymer Science, vol.27, issue.30, pp.816-828, 2000.
DOI : 10.1002/apmc.1973.050290103

T. E. Bernal-lara, R. Y. Liu, A. Hiltner, and E. Baer, Structure and thermal stability of polyethylene nanolayers, Polymer, vol.46, issue.9, pp.3043-3055, 2005.
DOI : 10.1016/j.polymer.2005.01.055

M. Ponting, A. Hiltner, and E. Baer, Polymer Nanostructures by Forced Assembly: Process, Structure, and Properties, Macromolecular Symposia, vol.323, issue.1, pp.19-32, 2010.
DOI : 10.1007/978-94-011-4138-3_16

M. F. Weber, C. A. Stover, L. R. Gilbert, T. J. Nevitt, and A. J. Ouderkirk, Giant Birefringent Optics in Multilayer Polymer Mirrors, Science, vol.287, issue.5462, pp.2451-2456, 2000.
DOI : 10.1126/science.287.5462.2451

M. Ponting, T. M. Burt, L. T. Korley, J. Andrews, A. Hiltner et al., Gradient Multilayer Films by Forced Assembly Coextrusion, Industrial & Engineering Chemistry Research, vol.49, issue.23, pp.12111-12118, 2010.
DOI : 10.1021/ie100321h

C. Lai, M. T. Ponting, and E. Baer, Influence of interdiffusion on multilayered gradient refractive index (GRIN) lens materials, Polymer, vol.53, issue.6, pp.1393-1403, 2012.
DOI : 10.1016/j.polymer.2012.01.036

H. Wang, Confined Crystallization of Polyethylene Oxide in Nanolayer Assemblies, Science, vol.38, issue.5564, pp.757-760, 2009.
DOI : 10.1126/science.1070821

H. Wang, J. K. Keum, A. Hiltner, and E. Baer, Confined Crystallization of PEO in Nanolayered Films Impacting Structure and Oxygen Permeability, Macromolecules, vol.42, issue.18, pp.7055-7066, 2009.
DOI : 10.1021/ma901379f

M. Gupta, Y. Lin, T. Deans, E. Baer, A. Hiltner et al., -maleic anhydride)/Phosphate Glass Composites Prepared by Microlayer Coextrusion, Macromolecules, vol.43, issue.9, pp.4230-4239, 2010.
DOI : 10.1021/ma100391u

G. Zhang, E. Baer, and A. Hiltner, Gas permeability of poly(4-methylpentene-1) in a confined nanolayered film system, Polymer, vol.54, issue.16, pp.4298-4308, 2013.
DOI : 10.1016/j.polymer.2013.05.074

S. Nazarenko, A. Hiltner, and E. Baer, Polymer microlayer structures with anisotropic conductivity, Journal of Materials Science, vol.34, issue.7, pp.1461-1470, 1999.
DOI : 10.1023/A:1004527205239

M. Mackey, A. Hiltner, E. Baer, L. Flandin, M. A. Wolak et al., Enhanced breakdown strength of multilayered films fabricated by forced assembly microlayer coextrusion, Journal of Physics D: Applied Physics, vol.42, issue.17, p.175304, 2009.
DOI : 10.1088/0022-3727/42/17/175304

Z. Zhou, M. Mackey, J. Carr, L. Zhu, L. Flandin et al., Multilayered polycarbonate/poly(vinylidene fluoride-co-hexafluoropropylene) for high energy density capacitors with enhanced lifetime, Journal of Polymer Science Part B: Polymer Physics, vol.26, issue.14, pp.993-1003, 2012.
DOI : 10.1109/14.78335

M. Mackey, Reduction of Dielectric Hysteresis in Multilayered Films via Nanoconfinement, Macromolecules, vol.45, issue.4, pp.1954-1962, 2012.
DOI : 10.1021/ma202267r

J. M. Carr, M. Mackey, L. Flandin, D. Schuele, L. Zhu et al., -tetrafluoroethylene) multilayer films, Journal of Polymer Science Part B: Polymer Physics, vol.18, issue.11
DOI : 10.1080/01411598908206863

K. Koo, H. Ahn, S. Kim, D. Y. Ryu, and T. P. Russell, Directed self-assembly of block copolymers in the extreme: guiding microdomains from the small to the large, Soft Matter, vol.49, issue.38, pp.9059-9071, 2013.
DOI : 10.1016/j.polymer.2008.03.009

L. Leibler, Theory of Microphase Separation in Block Copolymers, Macromolecules, vol.13, issue.6, pp.1602-1617, 1980.
DOI : 10.1021/ma60078a047

G. H. Fredrickson and E. Helfand, Fluctuation effects in the theory of microphase separation in block copolymers, The Journal of Chemical Physics, vol.11, issue.1, pp.697-705, 1987.
DOI : 10.1063/1.452194

C. Park, J. Yoon, and E. L. Thomas, Enabling nanotechnology with self assembled block copolymer patterns, Polymer, vol.44, issue.22, pp.6725-6760, 2003.
DOI : 10.1016/j.polymer.2003.08.011

C. Fleury, Structuration et rhéologie des solutions de copolymères triblocs SBM : smectiques frustres d'intérêt industriel, 2001.

A. K. Khandpur, Polyisoprene-Polystyrene Diblock Copolymer Phase Diagram near the Order-Disorder Transition, Macromolecules, vol.28, issue.26, pp.8796-8806, 1995.
DOI : 10.1021/ma00130a012

M. W. Matsen and F. S. Bates, Unifying Weak- and Strong-Segregation Block Copolymer Theories, Macromolecules, vol.29, issue.4, pp.1091-1098, 1996.
DOI : 10.1021/ma951138i

E. Helfand and Y. Tagami, Theory of the interface between immiscible polymers, Journal of Polymer Science Part B: Polymer Letters, vol.9, issue.10, pp.741-746, 1971.
DOI : 10.1002/pol.1971.110091006

E. Helfand and Y. Tagami, Theory of the Interface Between Immiscible Polymers, The Journal of Chemical Physics, vol.57, issue.4, pp.1812-1813, 1972.
DOI : 10.1063/1.1677735

E. Helfand and Y. Tagami, Theory of the Interface between Immiscible Polymers. II, The Journal of Chemical Physics, vol.17, issue.7, pp.3592-3601, 1972.
DOI : 10.1063/1.1711844

E. Helfand and A. M. Sapse, Theory of unsymmetric polymer???polymer interfaces, The Journal of Chemical Physics, vol.15, issue.2, pp.1327-1331, 1975.
DOI : 10.1063/1.1730446

E. Helfand and Z. R. Wasserman, Block Copolymer Theory. 4. Narrow Interphase Approximation, Macromolecules, vol.9, issue.6, pp.879-888, 1976.
DOI : 10.1021/ma60054a001

E. Helfand and Z. R. Wasserman, Block Copolymer Theory. 5. Spherical Domains, Macromolecules, vol.11, issue.5, pp.960-966, 1978.
DOI : 10.1021/ma60065a023

E. Helfand and Z. Wasserman, Block Copolymer Theory. 6. Cylindrical Domains, Macromolecules, vol.13, issue.4, pp.994-998, 1980.
DOI : 10.1021/ma60076a045

M. W. Matsen and M. Schick, Stable and unstable phases of a diblock copolymer melt, Physical Review Letters, vol.41, issue.16, pp.2660-2663, 1994.
DOI : 10.1021/ma00071a044

M. W. Matsen, Polydispersity-Induced Macrophase Separation in Diblock Copolymer Melts, Physical Review Letters, vol.52, issue.14, pp.1483041-1483044, 2007.
DOI : 10.1083/jcb.200603055

N. A. Lynd, A. J. Meuler, and M. A. Hillmyer, Polydispersity and block copolymer selfassembly, Progress in Polymer Science, pp.875-893, 2008.
DOI : 10.1016/j.progpolymsci.2008.07.003

N. A. Lynd, M. A. Hillmyer, and B. J. Hamilton, The role of polydispersity in the lamellar mesophase of model diblock copolymers, Journal of Polymer Science Part B: Polymer Physics, vol.21, issue.24, pp.3386-3393, 2007.
DOI : 10.1002/polb.21321

C. Burger, W. Ruland, and A. N. Semenov, Polydispersity effects on the microphase-separation transition in block copolymers, Macromolecules, vol.23, issue.13, pp.3339-3346, 1990.
DOI : 10.1021/ma00215a021

C. Burger, W. Ruland, and A. N. Semenov, Polydispersity effects on the microphase-separation transition in block copolymers [Erratum to document cited in CA113(2):7140f], Macromolecules, vol.24, issue.3, pp.816-816, 1991.
DOI : 10.1021/ma00003a029

N. A. Lynd and M. A. Hillmyer, Influence of Polydispersity on the Self-Assembly of Diblock Copolymers, Macromolecules, vol.38, issue.21, pp.8803-8810, 2005.
DOI : 10.1021/ma051025r

N. A. Lynd and M. A. Hillmyer, Effects of Polydispersity on the Order???Disorder Transition in Block Copolymer Melts, Macromolecules, vol.40, issue.22, pp.8050-8055, 2007.
DOI : 10.1021/ma070962r

A. Ruzette, Molecular Disorder and Mesoscopic Order in Polydisperse Acrylic Block Copolymers Prepared by Controlled Radical Polymerization, Macromolecules, vol.39, issue.17, pp.5804-5814, 2006.
DOI : 10.1021/ma060541u

URL : https://hal.archives-ouvertes.fr/hal-00096984

Y. Mori, L. S. Lim, and F. S. Bates, Consequences of Molecular Bridging in Lamellae-Forming Triblock/Pentablock Copolymer Blends, Macromolecules, vol.36, issue.26, pp.9879-9888, 2003.
DOI : 10.1021/ma035300q

H. Watanabe, Slow Dielectric Relaxation of a Styrene-Isoprene-Styrene Triblock Copolymer with Dipole Inversion in the Middle Block: A Challenge to a Loop/Bridge Problem, Macromolecules, vol.28, issue.14, pp.5006-5011, 1995.
DOI : 10.1021/ma00118a032

M. W. Matsen and R. B. Thompson, Equilibrium behavior of symmetric ABA triblock copolymer melts, The Journal of Chemical Physics, vol.41, issue.15, pp.7139-7146, 1999.
DOI : 10.1103/PhysRevLett.77.302

B. Bile, J. M. Gloaguen, J. M. Lefebvre, and J. P. Tancrez, Fracture behaviour of high impact polystyrene Influence of particle morphology, Plastics, Rubber and Composites, vol.30, issue.2, pp.77-81, 2001.
DOI : 10.1016/0032-3861(96)83709-8

C. B. Bucknall, I. K. Partridge, and M. V. Ward, Rubber toughening of plastics, Journal of Materials Science, vol.15, issue.6, pp.2064-2072, 1984.
DOI : 10.1007/BF00550274

K. Cho, J. Yang, and C. Park, The effect of rubber particle size on toughening behaviour of rubber-modified poly(methyl methacrylate) with different test methods, Polymer, vol.39, issue.14, pp.3073-3081, 1998.

C. Wrotecki, P. Heim, and P. Gaillard, Rubber toughening of poly(methyl methacrylate). Part I: Effect of the size and hard layer composition of the rubber particles, Polymer Engineering and Science, vol.28, issue.4, pp.213-217, 1991.
DOI : 10.1007/978-94-017-5349-4

C. Wrotecki, P. Heim, and P. Gaillard, Rubber toughening of poly(methyl methacrylate). Part II: Effect of a twin population of particle size, Polymer Engineering and Science, vol.16, issue.4, pp.218-222, 1991.
DOI : 10.1021/ba-1989-0222

P. Béguelin, Approche expérimentale du comportement mécanique des polymères en sollicitation rapide, École polytechnique fédérale de Lausanne, 1996.

P. A. Lovell, M. M. Sherratt, and R. J. Young, Mechanical Properties and Deformation Micromechanics of Rubber-Toughened Acrylic Polymers, Toughened Plastics II, pp.211-232, 1996.
DOI : 10.1021/ba-1996-0252.ch015

C. J. Plummer, P. Béguelin, and H. Kausch, Microdeformation in core-shell particle modified polymethylmethacrylates, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.153, issue.1-3, pp.1-3, 1999.
DOI : 10.1016/S0927-7757(98)00477-4

J. Crawshaw, M. Sferrazza, and A. M. Donald, Small angle X-ray scattering investigation of deformation in PMMA toughened with core???shell particles, Plastics, Rubber and Composites, vol.30, issue.2, pp.68-76, 2001.
DOI : 10.1016/0032-3861(95)94338-T

J. M. Gloaguen, P. Steer, P. Gaillard, C. Wrotecki, and J. M. Lefebvre, Plasticity and fracture initiation in rubber-toughened poly(methyl methacrylate), Polymer Engineering and Science, vol.24, issue.12, pp.748-753, 1993.
DOI : 10.1007/BF00585462

J. M. Gloaguen, J. M. Lefebvre, and C. Wrotecki, Critical energy for crack initiation in rubber-toughened poly(methyl methacrylate), Polymer, vol.34, issue.2, pp.443-445, 1993.
DOI : 10.1016/0032-3861(93)90106-K

L. Lalande, C. J. Plummer, J. E. Månson, and P. Gérard, The influence of matrix modification on fracture mechanisms in rubber toughened polymethylmethacrylate, Polymer, vol.47, issue.7, pp.2389-2401, 2006.
DOI : 10.1016/j.polymer.2006.02.016

F. Chauvin, Matériaux acryliques nanostructurés par polymérisation radicalaire contrôlée, 2002.

K. Matyjaszewski, M. J. Ziegler, S. V. Arehart, D. Greszta, and T. Pakula, Gradient copolymers by atom transfer radical copolymerization, Journal of Physical Organic Chemistry, vol.100, issue.11, pp.775-786, 2000.
DOI : 10.1002/masy.19870100117

P. Lacroix-desmazes, J. Lutz, F. Chauvin, R. Severac, and B. Boutevin, Living Radical Polymerization: Use of an Excess of Nitroxide as a Rate Moderator, Macromolecules, vol.34, issue.26, pp.8866-8871, 2001.
DOI : 10.1021/ma010365j

F. Chauvin, Value of the Initiating Alkoxyamine and the Importance of the Experimental Conditions, Macromolecules, vol.39, issue.16, pp.5238-5250, 2006.
DOI : 10.1021/ma0527193

URL : https://hal.archives-ouvertes.fr/hal-00119089

L. Lalande, C. J. Plummer, J. E. Månson, and P. Gérard, Microdeformation mechanisms in rubber toughened PMMA and PMMA-based copolymers, Engineering Fracture Mechanics, vol.73, issue.16, pp.2413-2426, 2006.
DOI : 10.1016/j.engfracmech.2006.05.014

. Arkema, Les Polymères Nanostructurés d'Arkema. Colloque Nanomatériaux à Paris Accessible via: http://cmm.minesparistech, 2009.

M. A. Hillmyer, P. M. Lipic, D. A. Hajduk, K. Almdal, and F. S. Bates, Self-Assembly and Polymerization of Epoxy Resin-Amphiphilic Block Copolymer Nanocomposites, Journal of the American Chemical Society, vol.119, issue.11, pp.2749-2750, 1997.
DOI : 10.1021/ja963622m

J. M. Dean, P. M. Lipic, R. B. Grubbs, R. F. Cook, and F. S. Bates, Micellar structure and mechanical properties of block copolymer-modified epoxies, Journal of Polymer Science Part B: Polymer Physics, vol.26, issue.23, pp.2996-3010, 2001.
DOI : 10.1007/BF01184979

J. M. Dean, R. B. Grubbs, W. Saad, R. F. Cook, and F. S. Bates, Mechanical properties of block copolymer vesicle and micelle modified epoxies, Journal of Polymer Science Part B: Polymer Physics, vol.13, issue.20, pp.2444-2456, 2003.
DOI : 10.1002/pen.760130105

J. Mijovic, M. Shen, J. W. Sy, and I. Mondragon, Dynamics and Morphology in Nanostructured Thermoset Network/Block Copolymer Blends during Network Formation, Macromolecules, vol.33, issue.14, pp.5235-5244, 2000.
DOI : 10.1021/ma991894e

Q. Guo, C. Harrats, G. Groeninckx, and M. H. Koch, Miscibility, crystallization kinetics and real-time small-angle X-ray scattering investigation of the semicrystalline morphology in thermosetting polymer blends of epoxy resin and poly(ethylene oxide), Polymer, vol.42, issue.9, pp.4127-4140, 2001.
DOI : 10.1016/S0032-3861(00)00813-2

Q. Guo, R. Thomann, W. Gronski, and T. Thurn-albrecht, -poly(ethylene oxide) Triblock Copolymers, Macromolecules, vol.35, issue.8
DOI : 10.1021/ma011971h

Q. Guo, R. Thomann, W. Gronski, R. Staneva, R. Ivanova et al., Nanostructures, Semicrytalline Morphology, and Nanoscale Confinement Effect on the Crystallization Kinetics in Self-Organized Block Copolymer/Thermoset Blends, Semicrytalline Morphology, and Nanoscale Confinement Effect on the Crystallization Kinetics in Self-Organized Block Copolymer/Thermoset Blends, pp.3635-3645, 2003.
DOI : 10.1021/ma0340154

R. Stadler, C. Auschra, J. Beckmann, U. Krappe, I. Voight-martin et al., Morphology and Thermodynamics of Symmetric Poly(A-block-B-block-C) Triblock Copolymers, Macromolecules, vol.28, issue.9, pp.3080-3097, 1995.
DOI : 10.1021/ma00113a010

S. Brinkmann, R. Stadler, and E. L. Thomas, New Structural Motif in Hexagonally Ordered Cylindrical Ternary (ABC) Block Copolymer Microdomains, Macromolecules, vol.31, issue.19, pp.6566-6572, 1998.
DOI : 10.1021/ma980103q

T. Goldacker and V. Abetz, A new way to the ???knitting pattern??? via blending of ABC triblock copolymers, Macromolecular Rapid Communications, vol.20, issue.8, pp.415-418, 1999.
DOI : 10.1002/(SICI)1521-3927(19990801)20:8<415::AID-MARC415>3.0.CO;2-J

V. Abetz and T. Goldacker, Formation of superlattices via blending of block copolymers, Macromolecular Rapid Communications, vol.21, issue.1, pp.16-34, 2000.
DOI : 10.1002/(SICI)1521-3927(20000101)21:1<16::AID-MARC16>3.0.CO;2-S

C. Tschierske, 6 Non-conventional soft matter, Annual Reports Section "C" (Physical Chemistry), vol.97, issue.1, pp.191-267, 2001.
DOI : 10.1039/b101114f

S. Ritzenthaler, F. Court, L. David, E. Girard-reydet, L. Leibler et al., ABC Triblock Copolymers/Epoxy???Diamine Blends. 1. Keys To Achieve Nanostructured Thermosets, Macromolecules, vol.35, issue.16, pp.6245-6254, 2002.
DOI : 10.1021/ma0121868

S. Ritzenthaler, Nanostructuration de reseaux epoxyde pas des copolymers à blocs de type ABC, L'Institut National des Sciences Appliquées de Lyon, 2000.

S. Ritzenthaler, F. Court, E. Girard-reydet, L. Leibler, and J. P. Pascault, ABC Triblock Copolymers/Epoxy???Diamine Blends. 2. Parameters Controlling the Morphologies and Properties, Macromolecules, vol.36, issue.1, pp.118-126, 2003.
DOI : 10.1021/ma0211075

. Arkema, Nanostrength® Block Copolymers for Wind Energy Accessible via: http://windpower.sandia.gov/2010BladeWorkshop/PDFs/2-1-C-2-Barsotti.pdf, 2010.

. Arkema, Nanostrength® Block Copolymers for Epoxy Toughening Accessible via: https://www.trfa.org/erc, 2008.

S. B. Darling, Directing the self-assembly of block copolymers, Progress in Polymer Science, vol.32, issue.10, pp.1152-1204, 2007.
DOI : 10.1016/j.progpolymsci.2007.05.004

J. Stasiak, A. M. Squires, V. Castelletto, I. W. Hamley, and G. D. Moggridge, Effect of Stretching on the Structure of Cylinder- and Sphere-Forming Styrene???Isoprene???Styrene Block Copolymers, Macromolecules, vol.42, issue.14, pp.5256-5265, 2009.
DOI : 10.1021/ma8026639

G. Arya, J. Rottler, A. Z. Panagiotopoulos, D. J. Srolovitz, and P. M. Chaikin, Shear Ordering in Thin Films of Spherical Block Copolymer, Langmuir, vol.21, issue.24, pp.11518-11527, 2005.
DOI : 10.1021/la0516476

A. P. Marencic and R. A. Register, Controlling Order in Block Copolymer Thin Films for Nanopatterning Applications, Annual Review of Chemical and Biomolecular Engineering, vol.1, issue.1, pp.277-297, 2010.
DOI : 10.1146/annurev-chembioeng-073009-101007

K. I. Winey, S. S. Patel, R. G. Larson, and H. Watanabe, Interdependence of shear deformations and block copolymer morphology, Macromolecules, vol.26, issue.10, pp.2542-2549, 1993.
DOI : 10.1021/ma00062a024

I. W. Hamley, The Physics of Block Copolymers, 1999.

I. W. Hamley, The effect of shear on ordered block copolymer solutions, Current Opinion in Colloid & Interface Science, vol.5, issue.5-6, pp.341-349, 2000.
DOI : 10.1016/S1359-0294(00)00072-8

I. W. Hamley, Structure and flow behaviour of block copolymers, Journal of Physics: Condensed Matter, vol.13, issue.33, pp.643-671, 2001.
DOI : 10.1088/0953-8984/13/33/201

U. Wiesner, Lamellar diblock copolymers under large amplitude oscillatory shear flow: Order and dynamics, Macromolecular Chemistry and Physics, vol.198, issue.11, pp.3319-3352, 1997.
DOI : 10.1002/macp.1997.021981101

K. A. Koppi, M. Tirrell, F. S. Bates, K. Almdal, and R. H. Colby, Lamellae orientation in dynamically sheared diblock copolymer melts, Journal de Physique II, vol.2, issue.11, pp.1941-1959, 1992.
DOI : 10.1051/jp2:1992245

URL : https://hal.archives-ouvertes.fr/jpa-00247780

K. I. Winey, S. S. Patel, R. G. Larson, and H. Watanabe, Morphology of a lamellar diblock copolymer aligned perpendicular to the sample plane: transmission electron microscopy and small-angle X-ray scattering, Macromolecules, vol.26, issue.16, pp.4373-4375, 1993.
DOI : 10.1021/ma00068a047

D. Maring and U. Wiesner, Threshold Strain Value for Perpendicular Orientation in Dynamically Sheared Diblock Copolymers, Macromolecules, vol.30, issue.3, pp.660-662, 1997.
DOI : 10.1021/ma961234z

Y. Zhang and U. Wiesner, Symmetric diblock copolymers under large amplitude oscillatory shear flow: Entanglement effect, The Journal of Chemical Physics, vol.61, issue.11, pp.4784-4793, 1995.
DOI : 10.1021/ma00093a042

Y. Zhang, U. Wiesner, and H. W. Spiess, Frequency Dependence of Orientation in Dynamically Sheared Diblock Copolymers, Macromolecules, vol.28, issue.3, pp.778-781, 1995.
DOI : 10.1021/ma00107a015

Y. Zhang and U. Wiesner, Symmetric diblock copolymers under large amplitude oscillatory shear flow: Dual frequency experiments, The Journal of Chemical Physics, vol.106, issue.7, pp.2961-2969, 1997.
DOI : 10.1021/ma00047a013

G. Fredrickson and F. S. Bates, Dynamics of Block Copolymers: Theory and Experiment, Annual Review of Materials Science, vol.26, issue.1, pp.501-550, 1996.
DOI : 10.1146/annurev.ms.26.080196.002441

S. Okamoto, K. Saijo, and T. Hashimoto, Real-Time SAXS Observations of Lamella-Forming Block Copolymers under Large Oscillatory Shear Deformation, Macromolecules, vol.27, issue.20, pp.5547-5555, 1994.
DOI : 10.1021/ma00098a006

L. Qiao and K. I. Winey, Evolution of Kink Bands and Tilt Boundaries in Block Copolymers at Large Shear Strains, Macromolecules, vol.33, issue.3, pp.851-856, 2000.
DOI : 10.1021/ma991303k

D. L. Polis and K. I. Winey, Kink Bands in a Lamellar Diblock Copolymer Induced by Large Amplitude Oscillatory Shear, Macromolecules, vol.29, issue.25, pp.8180-8187, 1996.
DOI : 10.1021/ma960831i

Y. Cohen, R. J. Albalak, B. J. Dair, M. S. Capel, and E. L. Thomas, Deformation of Oriented Lamellar Block Copolymer Films, Macromolecules, vol.33, issue.17, pp.6502-6516, 2000.
DOI : 10.1021/ma000513q

Y. Cohen, M. Brinkmann, and E. L. Thomas, Undulation, dilation, and folding of a layered block copolymer, The Journal of Chemical Physics, vol.25, issue.2, pp.984-992, 2000.
DOI : 10.1021/ma00036a019

I. W. Hamley, Complex layered phases in asymmetric diblock copolymers, Journal de Physique II, vol.4, issue.12, pp.2161-2186, 1994.
DOI : 10.1051/jp2:1994254

URL : https://hal.archives-ouvertes.fr/jpa-00248122

I. W. Hamley, K. A. Koppi, J. H. Rosedale, F. S. Bates, K. Almdal et al., Hexagonal mesophases between lamellae and cylinders in a diblock copolymer melt, Macromolecules, vol.26, issue.22, pp.5959-5970, 1993.
DOI : 10.1021/ma00074a018

D. A. Hajduk, H. Takenouchi, M. A. Hillmyer, F. S. Bates, M. E. Vigild et al., Stability of the Perforated Layer (PL) Phase in Diblock Copolymer Melts, Macromolecules, vol.30, issue.13, pp.3788-3795, 1997.
DOI : 10.1021/ma961673y

S. Qi and Z. Wang, Kinetics of phase transitions in weakly segregated block copolymers: Pseudostable and transient states, Physical Review E, vol.6, issue.2, pp.1682-1697, 1997.
DOI : 10.1051/jp2:1996202

T. Tepe, Variable Shear-Induced Orientation of a Diblock Copolymer Hexagonal Phase, Macromolecules, vol.28, issue.8, pp.3008-3011, 1995.
DOI : 10.1021/ma00112a061

A. Keller, E. Pedemonte, and F. M. Willmouth, Macro-lattice from Segregated Amorphous Phases of a Three Block Copolymer, Nature, vol.223, issue.5232, pp.538-539, 1970.
DOI : 10.1038/225538a0

M. J. Folkes, Processing, Structure and Properties of Block Copolymers, 1985.
DOI : 10.1007/978-94-009-4936-2

G. Hadziioannou, A. Mathis, and A. Skoulios, ??? Monocristaux ??? de copolym??res tris??quenc??s styr??ne/isopr??ne/styr??ne pr??sentant la structure cylindrique: I. ??tude de l'orientation par diffraction des rayons X aux petits angles, Colloid and Polymer Science, vol.22, issue.1, pp.15-22, 1979.
DOI : 10.1007/BF01539011

G. Hadziioannou, A. Mathis, and A. Skoulios, Obtention de ??? monocristaux ??? de copolym??res tris??quenc??s styr??ne/isopr??ne/styr??ne par cisaillement plan, Colloid and Polymer Science, vol.251, issue.2, pp.136-139, 1979.
DOI : 10.1007/BF01501413

K. Almdal, F. S. Bates, and K. Mortensen, Order, disorder, and fluctuation effects in an asymmetric poly(ethylene???propylene)???poly(ethylethylene) diblock copolymer, The Journal of Chemical Physics, vol.15, issue.12, pp.9122-9132, 1992.
DOI : 10.1021/ma00154a023

K. A. Koppi, M. Tirrell, F. S. Bates, K. Almdal, and K. Mortensen, Epitaxial growth and shearing of the body centered cubic phase in diblock copolymer melts, Journal of Rheology, vol.38, issue.4, pp.999-1027, 1994.
DOI : 10.1122/1.550600

F. S. Bates, K. A. Koppi, M. Tirrell, K. Almdal, and K. Mortensen, Influence of Shear on the Hexagonal-to-Disorder Transition in a Diblock Copolymer Melt, Macromolecules, vol.27, issue.20, pp.5934-5936, 1994.
DOI : 10.1021/ma00098a060

T. Pakula, K. Saijo, H. Kawai, and T. Hashimoto, Deformation behavior of styrene-butadiene-styrene triblock copolymer with cylindrical morphology, Macromolecules, vol.18, issue.6, pp.1294-1302, 1985.
DOI : 10.1021/ma00148a044

C. Daniel, I. W. Hamley, and K. Mortensen, Effect of planar extension on the structure and mechanical properties of polystyrene???poly(ethylene- co -butylene)???polystyrene triblock copolymers, Polymer, vol.41, issue.26, pp.9239-9247, 2000.
DOI : 10.1016/S0032-3861(00)00308-6

C. Daniel and I. W. Hamley, Extensional and shear rheometry of oriented triblock copolymers, Rheologica Acta, vol.39, issue.3, pp.191-200, 2000.
DOI : 10.1007/s003970000086

C. Park, S. Simmons, L. J. Fetters, B. Hsiao, F. Yeh et al., Spherical to cylindrical microdomain transformation by application of a flow field, Polymer, vol.41, issue.8, pp.2971-2977, 2000.
DOI : 10.1016/S0032-3861(99)00443-7

T. Kotaka, M. Okamoto, A. Kojima, Y. K. Kwon, and S. Nojima, Elongational flow-induced morphology change of block copolymers Part 1. A polystyrene- block -poly(ethylene butylene)- block -polystyrene- block -poly(ethylene butylene) tetrablock copolymer with polystyrene spherical microdomains, Polymer, vol.42, issue.3, pp.1207-1217, 2001.
DOI : 10.1016/S0032-3861(00)00422-5

S. Sakurai, Synchrotron Small???Angle X???Ray Scattering Studies on Flow???Induced Gyroid to Cylinder Transition in an Elastomeric SBS Triblock Copolymer, Journal of Macromolecular Science, Part B, vol.80, issue.1, pp.1-11, 2004.
DOI : 10.1103/PhysRevLett.80.4470

R. Eskimergen, K. Mortensen, and M. E. Vigild, Shear Instability of a Gyroid Diblock Copolymer, Macromolecules, vol.38, issue.4, pp.1286-1291, 2005.
DOI : 10.1021/ma047853m

K. Mortensen and M. E. Vigild, Reinvestigation of the Block Copolymer Modulated Lamellar Structure, Macromolecules, vol.42, issue.5, pp.1685-1690, 2009.
DOI : 10.1021/ma8024249

J. L. Keddie, R. A. Jones, and R. A. Cory, Size-Dependent Depression of the Glass Transition Temperature in Polymer Films, Europhysics Letters (EPL), vol.27, issue.1, p.59, 1994.
DOI : 10.1209/0295-5075/27/1/011

J. A. Forrest and K. Dalnoki-veress, The glass transition in thin polymer films, Advances in Colloid and Interface Science, vol.94, issue.1-3, pp.167-195, 2001.
DOI : 10.1016/S0001-8686(01)00060-4

J. S. Sharp and J. A. Forrest, Dielectric and ellipsometric studies of the dynamics in thin films of isotactic poly(methylmethacrylate) with one free surface, Physical Review E, vol.84, issue.2, p.31805, 2003.
DOI : 10.1103/PhysRevLett.84.915

S. H. Kim, M. J. Misner, T. Xu, M. Kimura, and T. P. Russell, Highly Oriented and Ordered Arrays from Block Copolymers via Solvent Evaporation, Advanced Materials, vol.16, issue.3, pp.226-231, 2004.
DOI : 10.1002/adma.200304906

A. Knoll, Phase Behavior in Thin Films of Cylinder-Forming Block Copolymers, Physical Review Letters, vol.33, issue.3, p.35501, 2002.
DOI : 10.1021/ma990021h

H. Watanabe, T. Sato, K. Osaki, M. Yao, and A. Yamagishi, Rheological and Dielectric Behavior of a Styrene???Isoprene???Styrene Triblock Copolymer in Selective Solvents. 2. Contribution of Loop-Type Middle Blocks to Elasticity and Plasticity, Macromolecules, vol.30, issue.19, pp.5877-5892, 1997.
DOI : 10.1021/ma9617577

H. Watanabe, T. Sato, and K. Osaki, Concentration Dependence of Loop Fraction in Styrene???Isoprene???Styrene Triblock Copolymer Solutions and Corresponding Changes in Equilibrium Elasticity, Macromolecules, vol.33, issue.7, pp.2545-2550, 2000.
DOI : 10.1021/ma991979f

A. Takano, I. Kamaya, Y. Takahashi, and Y. Matsushita, Effect of Loop/Bridge Conformation Ratio on Elastic Properties of the Sphere-Forming ABA Triblock Copolymers: Preparation of Samples and Determination of Loop/Bridge Ratio, Macromolecules, vol.38, issue.23, pp.9718-9723, 2005.
DOI : 10.1021/ma050712f

Y. Takahashi, Y. Song, N. Nemoto, A. Takano, Y. Akazawa et al., Effect of Loop/Bridge Conformation Ratio on Elastic Properties of the Sphere-Forming ABA Triblock Copolymers under Uniaxial Elongation, Macromolecules, vol.38, issue.23, pp.9724-9729, 2005.
DOI : 10.1021/ma050720w

L. M. Pitet, S. F. Wuister, E. Peeters, E. J. Kramer, C. J. Hawker et al., -poly(lactide) Diblock Copolymers, Macromolecules, vol.46, issue.20, pp.8289-8295, 2013.
DOI : 10.1021/ma401719p

E. Huang, Using Surface Active Random Copolymers To Control the Domain Orientation in Diblock Copolymer Thin Films, Macromolecules, vol.31, issue.22, pp.7641-7650, 1998.
DOI : 10.1021/ma980705+

A. L. Frischknecht, J. G. Curro, L. J. Douglas, and . Frink, Density functional theory for inhomogeneous polymer systems. II. Application to block copolymer thin films, The Journal of Chemical Physics, vol.61, issue.22, pp.10398-10411, 2002.
DOI : 10.1021/ma00117a069

D. Meng and Q. Wang, Complex morphologies in thin films of symmetric diblock copolymers as stable and unstable phases, Soft Matter, vol.2, issue.214, pp.5891-5906, 2010.
DOI : 10.1039/c0sm00506a

S. H. Anastasiadis, T. P. Russell, S. K. Satija, and C. F. Majkrzak, Neutron reflectivity studies of the surface-induced ordering of diblock copolymer films, Physical Review Letters, vol.54, issue.16, pp.1852-1855, 1989.
DOI : 10.1103/PhysRev.95.359

G. Coulon, B. Collin, D. Ausserre, D. Chatenay, and T. P. Russell, Islands and holes on the free surface of thin diblock copolymer films. I. Characteristics of formation and growth, Journal de Physique, vol.140, issue.B
DOI : 10.1002/masy.19880160107

URL : https://hal.archives-ouvertes.fr/jpa-00247865

W. Li, M. Liu, F. Qiu, and A. Shi, Phase Diagram of Diblock Copolymers Confined in Thin Films, The Journal of Physical Chemistry B, vol.117, issue.17, pp.5280-5288, 2013.
DOI : 10.1021/jp309546q

Y. Xu, W. Li, F. Qiu, Y. Yang, and A. Shi, Self-Assembly of ABC Star Triblock Copolymers under a Cylindrical Confinement, The Journal of Physical Chemistry B, vol.113, issue.32, pp.11153-11159, 2009.
DOI : 10.1021/jp9043896

N. Yan, Y. Zhu, and W. Jiang, Self-assembly of ABC triblock copolymers under 3D soft confinement: a Monte Carlo study, Soft Matter, vol.26, issue.3, pp.965-972, 2016.
DOI : 10.1021/la102211d

Z. Jiang, C. Xu, Y. Dong-qiu, X. Wang, D. Zhou et al., Complex microstructures of ABC triblock copolymer thin films directed by polymer brushes based on self-consistent field theory, Nanoscale Research Letters, vol.9, issue.1, p.359, 2014.
DOI : 10.1186/1556-276X-9-359

T. M. Burt, S. Monemian, A. M. Jordan, and L. T. Korley, Thin film confinement of a spherical block copolymer via forced assembly co-extrusion, Soft Matter, vol.37, issue.17, pp.4381-4385, 2013.
DOI : 10.1021/ma049233r

T. M. Burt, A. M. Jordan, and L. T. Korley, Investigating Interfacial Contributions on the Layer-Thickness-Dependent Mechanical Response of Confined Self-Assembly via Forced Assembly, Macromolecular Chemistry and Physics, vol.42, issue.8, pp.873-881, 2013.
DOI : 10.1021/ma8026639

T. M. Burt, A. M. Jordan, and L. T. Korley, Toward Anisotropic Materials via Forced Assembly Coextrusion, ACS Applied Materials & Interfaces, vol.4, issue.10, pp.5155-5161, 2012.
DOI : 10.1021/am301072s

T. M. Burt, J. Keum, A. Hiltner, E. Baer, and L. T. Korley, Confinement of Elastomeric Block Copolymers via Forced Assembly Coextrusion, ACS Applied Materials & Interfaces, vol.3, issue.12, pp.4804-4811, 2011.
DOI : 10.1021/am201297f

J. Boutillier and J. Disson, Novel impact-reinforced acrylic material, US 20140030538 A1. Arkema France, 2014.

R. Huang, Co-Extrusion Layer Multiplication of Rheologically Mismatched Polymers: A Novel Processing Route, International Polymer Processing, vol.30, issue.3, pp.317-330, 2015.
DOI : 10.3139/217.2955

M. Ponting, A. Hiltner, and E. Baer, Polymer Nanostructures by Forced Assembly: Process, Structure, and Properties, Macromolecular Symposia, vol.323, issue.1, pp.19-32, 2010.
DOI : 10.1007/978-94-011-4138-3_16

W. Michaeli, Extrusion Dies for Plastics and Rubber: Design and Engineering Computations, 2003.
DOI : 10.3139/9783446401815

W. J. Schrenk and T. A. Jr, Chapter 15 -Coextruded Multilayer Polymer Films and Sheets, pp.129-165, 1978.
DOI : 10.1016/b978-0-12-546802-2.50011-7

C. Sollogoub, A. Grandmontagne, and A. Guinault, Instabilities in a Layer-Multiplying Device, International Conference on Advances in Materials and Processing Technologies (AMPT2010), pp.1267-1272, 2011.
DOI : 10.1063/1.3552358

A. M. Striegel, W. W. Yau, J. J. Kirkland, and D. D. Bly, Experimental Variables and Techniques, " in Modern Size-Exclusion Liquid Chromatography, pp.145-192, 2009.

A. M. Striegel, W. W. Yau, J. J. Kirkland, and D. D. Bly, Calibration, " in Modern Size- Exclusion Liquid Chromatography, pp.193-229, 2009.

G. Wypych, PMMA polymethylmethacrylate, Handbook of Polymers, pp.467-471, 2016.
DOI : 10.1016/b978-1-895198-47-8.50136-3

X. Lu and B. Jiang, Glass transition temperature and molecular parameters of polymer, Polymer, vol.32, issue.3, pp.471-478, 1991.
DOI : 10.1016/0032-3861(91)90451-N

G. Wypych, PS polystyrene, Handbook of Polymers, pp.560-566, 2016.
DOI : 10.1016/b978-1-895198-47-8.50162-4

G. Wypych, PC polycarbonate, Handbook of Polymers, pp.316-322, 2016.
DOI : 10.1016/b978-1-895198-47-8.50097-7

M. Fernández-garcía, R. Cuervo-rodríguez, and E. L. Madruga, Glass transition temperatures of butyl acrylate-methyl methacrylate copolymers, Journal of Polymer Science Part B: Polymer Physics, vol.36, issue.17, pp.2512-2520, 1999.
DOI : 10.1002/(SICI)1099-0518(199802)36:3<495::AID-POLA13>3.0.CO;2-I

G. Wypych, PB 1,2-polybutylene, Handbook of Polymers, pp.286-289, 2016.

W. P. Cox and E. H. Merz, Correlation of dynamic and steady flow viscosities, Journal of Polymer Science, vol.28, issue.118, pp.619-622, 1958.
DOI : 10.1002/pol.1958.1202811812

C. D. Mueller, S. Nazarenko, T. Ebeling, T. L. Schuman, A. Hiltner et al., Novel structures by microlayer coextrusion?talc-filled PP, PC/SAN, and HDPE/LLDPE, Polymer Engineering & Science, vol.25, issue.2, pp.355-362, 1997.
DOI : 10.1002/pen.11678

M. Ma, K. Vijayan, A. Hiltner, E. Baer, and J. Im, Thickness effects in microlayer composites of polycarbonate and poly(styrene-acrylonitrile), Journal of Materials Science, vol.10, issue.4, pp.2039-2046, 1990.
DOI : 10.1007/BF01045761

J. E. Tollar, Interfacial surface generator, 1966.

R. J. Crawford, Plastics Engineering, Third Edition, 1998.

M. Park, C. Harrison, P. M. Chaikin, R. A. Register, and D. H. Adamson, Block Copolymer Lithography: Periodic Arrays of 1011 Holes in 1&nbsp;Square Centimeter, Science, vol.276, issue.5317, pp.1401-1404, 1997.
DOI : 10.1126/science.276.5317.1401

D. W. Schubert and T. Dunkel, Spin coating from a molecular point of view: its concentration regimes, influence of molar mass and distribution, Materials Research Innovations, vol.7, issue.5, pp.314-321, 2003.
DOI : 10.1007/s10019-003-0270-2

P. Drude, Zur Elektronentheorie der Metalle, Annalen der Physik, vol.69, issue.3, pp.566-613, 1900.
DOI : 10.1002/andp.18983010614

P. Drude, Zur Elektronentheorie der Metalle; II. Teil. Galvanomagnetische und thermomagnetische Effecte, Annalen der Physik, vol.1, issue.11, pp.369-402, 1900.
DOI : 10.1002/andp.18862640605

S. Roland, G. Miquelard-garnier, M. Gervais, A. Guinault, and C. Sollogoub, Controlling the order of triblock copolymer via confinement induced by forced self-assembly, Materials Today Communications, vol.6, issue.6, pp.37-43, 2016.
DOI : 10.1016/j.mtcomm.2015.11.003

L. C. Sawyer and D. T. Grubb, Specimen preparation methods, Polymer Microscopy, pp.83-173, 1996.
DOI : 10.1007/978-94-015-8595-8_4

J. S. Trent, J. I. Scheinbeim, and P. R. Couchman, Ruthenium tetraoxide staining of polymers for electron microscopy, Macromolecules, vol.16, issue.4, pp.589-598, 1983.
DOI : 10.1021/ma00238a021

R. Vitali and E. Montani, Ruthenium tetroxide as a staining agent for unsaturated and saturated polymers, Polymer, vol.21, issue.10, pp.1220-1222, 1980.
DOI : 10.1016/0032-3861(80)90091-9

C. M. Bates and F. S. Bates, : Block Polymers???Pure Potential, Macromolecules, vol.50, issue.1, pp.3-22, 2017.
DOI : 10.1021/acs.macromol.6b02355

URL : http://doi.org/10.1021/acs.macromol.6b02355

R. A. Jones, Polymers at Surfaces and Interfaces, 1999.
DOI : 10.1017/cbo9780511623196

G. Fredrickson and F. S. Bates, Dynamics of Block Copolymers: Theory and Experiment, Annual Review of Materials Science, vol.26, issue.1, pp.501-550, 1996.
DOI : 10.1146/annurev.ms.26.080196.002441

I. W. Hamley, Ordering in thin films of block copolymers: Fundamentals to potential applications, Progress in Polymer Science, pp.1161-1210, 2009.
DOI : 10.1016/j.progpolymsci.2009.06.003

C. Park, J. Yoon, and E. L. Thomas, Enabling nanotechnology with self assembled block copolymer patterns, Polymer, vol.44, issue.22, pp.6725-6760, 2003.
DOI : 10.1016/j.polymer.2003.08.011

URL : https://doi.org/10.1016/j.polymer.2003.08.011

M. W. Matsen, Effect of Architecture on the Phase Behavior of AB-Type Block Copolymer Melts, Macromolecules, vol.45, issue.4, pp.2161-2165, 2012.
DOI : 10.1021/ma202782s

M. W. Matsen and R. B. Thompson, Equilibrium behavior of symmetric ABA triblock copolymer melts, The Journal of Chemical Physics, vol.41, issue.15, pp.7139-7146, 1999.
DOI : 10.1103/PhysRevLett.77.302

A. Ruzette, Molecular Disorder and Mesoscopic Order in Polydisperse Acrylic Block Copolymers Prepared by Controlled Radical Polymerization, Macromolecules, vol.39, issue.17, pp.5804-5814, 2006.
DOI : 10.1021/ma060541u

URL : https://hal.archives-ouvertes.fr/hal-00096984

N. A. Lynd, A. J. Meuler, and M. A. Hillmyer, Polydispersity and block copolymer selfassembly, Progress in Polymer Science, pp.875-893, 2008.

N. A. Lynd and M. A. Hillmyer, Influence of Polydispersity on the Self-Assembly of Diblock Copolymers, Macromolecules, vol.38, issue.21, pp.8803-8810, 2005.
DOI : 10.1021/ma051025r

N. A. Lynd and M. A. Hillmyer, Effects of Polydispersity on the Order???Disorder Transition in Block Copolymer Melts, Macromolecules, vol.40, issue.22, pp.8050-8055, 2007.
DOI : 10.1021/ma070962r

N. A. Lynd, M. A. Hillmyer, and B. J. Hamilton, The role of polydispersity in the lamellar mesophase of model diblock copolymers, Journal of Polymer Science Part B: Polymer Physics, vol.21, issue.24, pp.3386-3393, 2007.
DOI : 10.1002/polb.21321

M. W. Matsen, Polydispersity-Induced Macrophase Separation in Diblock Copolymer Melts, Physical Review Letters, vol.52, issue.14, pp.1483041-1483044, 2007.
DOI : 10.1083/jcb.200603055

M. W. Matsen, Equilibrium behavior of asymmetric ABA triblock copolymer melts, The Journal of Chemical Physics, vol.22, issue.13, pp.5539-5544, 2000.
DOI : 10.1021/ma00192a057

W. Li, M. Liu, F. Qiu, and A. Shi, Phase Diagram of Diblock Copolymers Confined in Thin Films, The Journal of Physical Chemistry B, vol.117, issue.17, pp.5280-5288, 2013.
DOI : 10.1021/jp309546q

H. Xiang, K. Shin, T. Kim, S. Moon, T. J. Mccarthy et al., The influence of confinement and curvature on the morphology of block copolymers, Journal of Polymer Science Part B: Polymer Physics, vol.3, issue.23, pp.3377-3383, 2005.
DOI : 10.1002/polb.20641

H. Xiang, K. Shin, T. Kim, S. I. Moon, T. J. Mccarthy et al., Block Copolymers under Cylindrical Confinement, Macromolecules, vol.37, issue.15, pp.5660-5664, 2004.
DOI : 10.1021/ma049299m

C. R. Stewart-sloan and E. L. Thomas, Interplay of symmetries of block polymers and confining geometries, European Polymer Journal, vol.47, issue.4, pp.630-646, 2011.
DOI : 10.1016/j.eurpolymj.2010.10.013

N. Koneripalli, N. Singh, R. Levicky, F. S. Bates, P. D. Gallagher et al., Confined Block Copolymer Thin Films, Macromolecules, vol.28, issue.8, pp.2897-2904, 1995.
DOI : 10.1021/ma00112a041

T. P. Russell and Y. Chai, : Putting the Squeeze on Polymers: A Perspective on Polymer Thin Films and Interfaces, Macromolecules, vol.50, issue.12, pp.4597-4609, 2017.
DOI : 10.1021/acs.macromol.7b00418

S. B. Darling, Directing the self-assembly of block copolymers, Progress in Polymer Science, vol.32, issue.10, pp.1152-1204, 2007.
DOI : 10.1016/j.progpolymsci.2007.05.004

J. Stasiak, A. M. Squires, V. Castelletto, I. W. Hamley, and G. D. Moggridge, Effect of Stretching on the Structure of Cylinder- and Sphere-Forming Styrene???Isoprene???Styrene Block Copolymers, Macromolecules, vol.42, issue.14, pp.5256-5265, 2009.
DOI : 10.1021/ma8026639

G. Arya, J. Rottler, A. Z. Panagiotopoulos, D. J. Srolovitz, and P. M. Chaikin, Shear Ordering in Thin Films of Spherical Block Copolymer, Langmuir, vol.21, issue.24, pp.11518-11527, 2005.
DOI : 10.1021/la0516476

A. P. Marencic, D. H. Adamson, P. M. Chaikin, and R. A. Register, Shear alignment and realignment of sphere-forming and cylinder-forming block-copolymer thin films, Physical Review E, vol.81, issue.1, pp.1150301-01150310, 2010.
DOI : 10.1021/ma950643c

K. I. Winey, S. S. Patel, R. G. Larson, and H. Watanabe, Interdependence of shear deformations and block copolymer morphology, Macromolecules, vol.26, issue.10, pp.2542-2549, 1993.
DOI : 10.1021/ma00062a024

M. Cloitre and D. Vlassopoulos, Block Copolymers in External Fields: Rheology, Flow-Induced Phenomena, and Applications, Applied Polymer Rheology, rianna Kontopoulou
DOI : 10.1021/nn901370g

I. W. Hamley, Structure and flow behaviour of block copolymers, Journal of Physics: Condensed Matter, vol.13, issue.33, pp.643-671, 2001.
DOI : 10.1088/0953-8984/13/33/201

F. S. Bates, Fluctuations, conformational asymmetry and block copolymer phase behaviour, Faraday Discuss., vol.93, pp.7-18, 1994.
DOI : 10.1073/pnas.85.15.5364

URL : http://orbit.dtu.dk/en/publications/fluctuations-conformational-asymmetry-and-block-copolymer-phase-behaviour(9067bfc2-7c55-458b-b0cf-b1446a4aaa55).html

I. W. Hamley, K. A. Koppi, J. H. Rosedale, F. S. Bates, K. Almdal et al., Hexagonal mesophases between lamellae and cylinders in a diblock copolymer melt, Macromolecules, vol.26, issue.22, pp.5959-5970, 1993.
DOI : 10.1021/ma00074a018

R. Eskimergen, K. Mortensen, and M. E. Vigild, Shear Instability of a Gyroid Diblock Copolymer, Macromolecules, vol.38, issue.4, pp.1286-1291, 2005.
DOI : 10.1021/ma047853m

S. Sakurai, Synchrotron Small???Angle X???Ray Scattering Studies on Flow???Induced Gyroid to Cylinder Transition in an Elastomeric SBS Triblock Copolymer, Journal of Macromolecular Science, Part B, vol.80, issue.1, pp.1-11, 2004.
DOI : 10.1103/PhysRevLett.80.4470

F. S. Bates, K. A. Koppi, M. Tirrell, K. Almdal, and K. Mortensen, Influence of Shear on the Hexagonal-to-Disorder Transition in a Diblock Copolymer Melt, Macromolecules, vol.27, issue.20, pp.5934-5936, 1994.
DOI : 10.1021/ma00098a060

K. A. Koppi, M. Tirrell, F. S. Bates, K. Almdal, and K. Mortensen, Epitaxial growth and shearing of the body centered cubic phase in diblock copolymer melts, Journal of Rheology, vol.38, issue.4, pp.999-1027, 1994.
DOI : 10.1122/1.550600

M. P. Stoykovich, Directed Assembly of Block Copolymer Blends into Nonregular Device-Oriented Structures, Science, vol.308, issue.5727, pp.1442-1446, 2005.
DOI : 10.1126/science.1111041

A. P. Marencic and R. A. Register, Controlling Order in Block Copolymer Thin Films for Nanopatterning Applications, Annual Review of Chemical and Biomolecular Engineering, vol.1, issue.1, pp.277-297, 2010.
DOI : 10.1146/annurev-chembioeng-073009-101007

J. Bang, U. Jeong, D. Y. Ryu, T. P. Russell, and C. J. Hawker, Block Copolymer Nanolithography: Translation of Molecular Level Control to Nanoscale Patterns, Advanced Materials, vol.6, issue.47, pp.4769-4792, 2009.
DOI : 10.1007/BF03218519

J. M. Carr, D. S. Langhe, M. T. Ponting, A. Hiltner, and E. Baer, Confined crystallization in polymer nanolayered films: A review, Journal of Materials Research, vol.130, issue.10, pp.1326-1350, 2012.
DOI : 10.1021/ma00045a033

M. Ponting, T. M. Burt, L. T. Korley, J. Andrews, A. Hiltner et al., Gradient Multilayer Films by Forced Assembly Coextrusion, Industrial & Engineering Chemistry Research, vol.49, issue.23, pp.12111-12118, 2010.
DOI : 10.1021/ie100321h

M. Ponting, A. Hiltner, and E. Baer, Polymer Nanostructures by Forced Assembly: Process, Structure, and Properties, Macromolecular Symposia, vol.323, issue.1, pp.19-32, 2010.
DOI : 10.1007/978-94-011-4138-3_16

R. Y. Liu, Y. Jin, A. Hiltner, and E. Baer, Probing Nanoscale Polymer Interactions by Forced-Assembly, Macromolecular Rapid Communications, vol.24, issue.16, pp.943-948, 2003.
DOI : 10.1002/marc.200300051

T. M. Burt, J. Keum, A. Hiltner, E. Baer, and L. T. Korley, Confinement of Elastomeric Block Copolymers via Forced Assembly Coextrusion, ACS Applied Materials & Interfaces, vol.3, issue.12, pp.4804-4811, 2011.
DOI : 10.1021/am201297f

T. M. Burt, A. M. Jordan, and L. T. Korley, Toward Anisotropic Materials via Forced Assembly Coextrusion, ACS Applied Materials & Interfaces, vol.4, issue.10, pp.5155-5161, 2012.
DOI : 10.1021/am301072s

T. M. Burt, A. M. Jordan, and L. T. Korley, Investigating Interfacial Contributions on the Layer-Thickness-Dependent Mechanical Response of Confined Self-Assembly via Forced Assembly, Macromolecular Chemistry and Physics, vol.42, issue.8, pp.873-881, 2013.
DOI : 10.1021/ma8026639

T. M. Burt, S. Monemian, A. M. Jordan, and L. T. Korley, Thin film confinement of a spherical block copolymer via forced assembly co-extrusion, Soft Matter, vol.37, issue.17, pp.4381-4385, 2013.
DOI : 10.1021/ma049233r

A. Bironeau, T. Salez, G. Miquelard-garnier, and C. Sollogoub, Existence of a Critical Layer Thickness in PS/PMMA Nanolayered Films, Macromolecules, vol.50, issue.10, pp.4064-4073, 2017.
DOI : 10.1021/acs.macromol.7b00176

URL : https://hal.archives-ouvertes.fr/hal-01577366

M. Boufarguine, A. Guinault, G. Miquelard-garnier, and C. Sollogoub, PLA/PHBV Films with Improved Mechanical and Gas Barrier Properties, Macromolecular Materials and Engineering, vol.30, issue.10, pp.1065-1073, 2013.
DOI : 10.1021/ma961431y

URL : https://hal.archives-ouvertes.fr/hal-00980637

X. Li, G. Miquelard-garnier, A. Guinault, C. Sollogoub, G. Regnier et al., Forced assembly by multilayer coextrusion to create oriented graphene reinforced polymer nanocomposites, Polymer, vol.55, issue.1, pp.248-257, 2013.
DOI : 10.1016/j.polymer.2013.11.025

URL : https://hal.archives-ouvertes.fr/hal-00980636

S. and F. Nassar, Multi-scale analysis of the impact of polylactide morphology on gas barrier properties, Polymer, vol.108, pp.163-172, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01483827

S. Roland, G. Miquelard-garnier, M. Gervais, A. Guinault, and C. Sollogoub, Controlling the order of triblock copolymer via confinement induced by forced self-assembly, Materials Today Communications, vol.6, issue.6, pp.37-43, 2016.
DOI : 10.1016/j.mtcomm.2015.11.003

J. S. Trent, J. I. Scheinbeim, and P. R. Couchman, Ruthenium tetraoxide staining of polymers for electron microscopy, Macromolecules, vol.16, issue.4, pp.589-598, 1983.
DOI : 10.1021/ma00238a021

R. Vitali and E. Montani, Ruthenium tetroxide as a staining agent for unsaturated and saturated polymers, Polymer, vol.21, issue.10, pp.1220-1222, 1980.
DOI : 10.1016/0032-3861(80)90091-9

G. David and J. Pérez, Combined sampler robot and high-performance liquid chromatography: a fully automated system for biological small-angle X-ray scattering experiments at the Synchrotron SOLEIL SWING beamline, Journal of Applied Crystallography, vol.42, issue.5, pp.892-900, 2009.
DOI : 10.1107/S0021889809029288

V. Khanna, Effect of Chain Architecture and Surface Energies on the Ordering Behavior of Lamellar and Cylinder Forming Block Copolymers, Macromolecules, vol.39, issue.26, pp.9346-9356, 2006.
DOI : 10.1021/ma0609228

K. Mortensen and M. E. Vigild, Reinvestigation of the Block Copolymer Modulated Lamellar Structure, Macromolecules, vol.42, issue.5, pp.1685-1690, 2009.
DOI : 10.1021/ma8024249

A. M. Donald and E. J. Kramer, The competition between shear deformation and crazing in glassy polymers, Journal of Materials Science, vol.16, issue.7, pp.1871-1879, 1982.
DOI : 10.1007/BF00540402

B. Bilé, J. M. Gloaguen, J. M. Lefebvre, and J. P. Tancrez, Fracture behaviour of high impact polystyrene Influence of particle morphology, Plastics, Rubber and Composites, vol.30, issue.2, pp.77-81, 2001.
DOI : 10.1016/0032-3861(96)83709-8

C. Wrotecki, P. Heim, and P. Gaillard, Rubber toughening of poly(methyl methacrylate). Part I: Effect of the size and hard layer composition of the rubber particles, Polymer Engineering and Science, vol.28, issue.4, pp.213-217, 1991.
DOI : 10.1007/978-94-017-5349-4

C. Wrotecki, P. Heim, and P. Gaillard, Rubber toughening of poly(methyl methacrylate). Part II: Effect of a twin population of particle size, Polymer Engineering and Science, vol.16, issue.4, pp.218-222, 1991.
DOI : 10.1021/ba-1989-0222

J. M. Gloaguen, P. Steer, P. Gaillard, C. Wrotecki, and J. M. Lefebvre, Plasticity and fracture initiation in rubber-toughened poly(methyl methacrylate), Polymer Engineering and Science, vol.24, issue.12, pp.748-753, 1993.
DOI : 10.1007/BF00585462

J. M. Gloaguen, J. M. Lefebvre, and C. Wrotecki, Critical energy for crack initiation in rubber-toughened poly(methyl methacrylate), Polymer, vol.34, issue.2, pp.443-445, 1993.
DOI : 10.1016/0032-3861(93)90106-K

P. Heim, C. Wrotecki, M. Avenel, and P. Gaillard, High impact cast sheets of poly(methyl methacrylate) with low levels of polyurethane, Polymer, vol.34, issue.8, pp.1653-1660, 1993.
DOI : 10.1016/0032-3861(93)90324-4

C. J. Plummer, P. Béguelin, and H. Kausch, Microdeformation in core-shell particle modified polymethylmethacrylates, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.153, issue.1-3, pp.1-3, 1999.
DOI : 10.1016/S0927-7757(98)00477-4

L. Lalande, C. J. Plummer, J. E. Månson, and P. Gérard, The influence of matrix modification on fracture mechanisms in rubber toughened polymethylmethacrylate, Polymer, vol.47, issue.7, pp.2389-2401, 2006.
DOI : 10.1016/j.polymer.2006.02.016

L. Lalande, C. J. Plummer, J. E. Månson, and P. Gérard, Microdeformation mechanisms in rubber toughened PMMA and PMMA-based copolymers, Engineering Fracture Mechanics, vol.73, issue.16, pp.2413-2426, 2006.
DOI : 10.1016/j.engfracmech.2006.05.014

S. Thomas, R. Shanks, and S. Chandrasekharakurup, Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems, 2015.

J. D. Tong and R. Jerôme, Synthesis of poly(methyl methacrylate)-b-poly( n -butyl acrylate)-b-poly(methyl methacrylate) triblocks and their potential as thermoplastic elastomers, Polymer, vol.41, issue.7, pp.2499-2510, 2000.
DOI : 10.1016/S0032-3861(99)00412-7

J. D. Tong, G. Moineau, P. Leclère, R. Brédas, R. Lazzaroni et al., -poly(methyl methacrylate) Triblocks. Ligated Anionic Polymerization vs Atom Transfer Radical Polymerization, Macromolecules, vol.33, issue.2, pp.470-479, 2000.
DOI : 10.1021/ma990886v

L. Lalande, Structure et mécanismes de microdéformation de polymethylmethacrylates renforcés au choc, École polytechnique fédérale de, 2007.

A. Ruzette, Molecular Disorder and Mesoscopic Order in Polydisperse Acrylic Block Copolymers Prepared by Controlled Radical Polymerization, Macromolecules, vol.39, issue.17, pp.5804-5814, 2006.
DOI : 10.1021/ma060541u

URL : https://hal.archives-ouvertes.fr/hal-00096984

J. Pinto, M. Dumon, M. Pedros, J. Reglero, and M. A. Rodriguez-perez, Nanocellular CO2 foaming of PMMA assisted by block copolymer nanostructuration, Chemical Engineering Journal, vol.243, pp.428-435, 2014.
DOI : 10.1016/j.cej.2014.01.021

URL : https://hal.archives-ouvertes.fr/hal-01372308

J. Pinto, M. Dumon, M. A. Rodriguez-perez, R. Garcia, and C. Dietz, Block Copolymers Self-Assembly Allows Obtaining Tunable Micro or Nanoporous Membranes or Depth Filters Based on PMMA; Fabrication Method and Nanostructures, The Journal of Physical Chemistry C, vol.118, issue.9, pp.4656-4663, 2014.
DOI : 10.1021/jp409803u

URL : https://hal.archives-ouvertes.fr/hal-01372287

I. W. Hamley, K. A. Koppi, J. H. Rosedale, F. S. Bates, K. Almdal et al., Hexagonal mesophases between lamellae and cylinders in a diblock copolymer melt, Macromolecules, vol.26, issue.22, pp.5959-5970, 1993.
DOI : 10.1021/ma00074a018

F. S. Bates, K. A. Koppi, M. Tirrell, K. Almdal, and K. Mortensen, Influence of Shear on the Hexagonal-to-Disorder Transition in a Diblock Copolymer Melt, Macromolecules, vol.27, issue.20, pp.5934-5936, 1994.
DOI : 10.1021/ma00098a060

T. Kotaka, T. Miki, and K. Arai, Morphology-mechanical property relationship of a polystyrene-polybutadiene-polystyrene block copolymer and its blends with homopolymers, Journal of Macromolecular Science, Part B, vol.3, issue.2, pp.303-336, 1980.
DOI : 10.1007/BF01526889

D. Wang, K. Nakajima, S. Fujinami, Y. Shibasaki, J. Wang et al., Characterization of morphology and mechanical properties of block copolymers using atomic force microscopy: Effects of processing conditions, Polymer, vol.53, issue.9, pp.1960-1965, 2012.
DOI : 10.1016/j.polymer.2012.02.046

G. Michler, F. Baltá-calleja, and E. , Chapter 3: Nanostructures of Two-Component Amorphous Block Copolymers: Effect of Chain Architecture, Mechanical Properties of Polymers based on Nanostructure and Morphology, pp.115-136, 2005.

G. Michler, F. Baltá-calleja, and E. , Chapter 10: Micromechanical Mechanisms of Toughness Enhancement in Nanostructured Amorphous and Semicrystalline Polymers, Mechanical Properties of Polymers based on Nanostructure and Morphology, pp.419-428, 2005.

C. C. Honeker and E. L. Thomas, Impact of Morphological Orientation in Determining Mechanical Properties in Triblock Copolymer Systems, Chemistry of Materials, vol.8, issue.8, pp.1702-1714, 1996.
DOI : 10.1021/cm960146q

I. Yamaoka and M. Kimura, Effects of morphology on mechanical properties of a SBS triblock copolymer, Polymer, vol.34, issue.21, pp.4399-4409, 1993.
DOI : 10.1016/0032-3861(93)90146-2

C. Ye, G. Singh, M. L. Wadley, A. Karim, K. A. Cavicchi et al., -polydimethylsiloxane Thin Films, Macromolecules, vol.46, issue.21, pp.8608-8615, 2013.
DOI : 10.1021/ma401780r

M. Ponting, A. Hiltner, and E. Baer, Polymer Nanostructures by Forced Assembly: Process, Structure, and Properties, Macromolecular Symposia, vol.323, issue.1, pp.19-32, 2010.
DOI : 10.1007/978-94-011-4138-3_16

T. M. Burt, J. Keum, A. Hiltner, E. Baer, and L. T. Korley, Confinement of Elastomeric Block Copolymers via Forced Assembly Coextrusion, ACS Applied Materials & Interfaces, vol.3, issue.12, pp.4804-4811, 2011.
DOI : 10.1021/am201297f

T. M. Burt, A. M. Jordan, and L. T. Korley, Toward Anisotropic Materials via Forced Assembly Coextrusion, ACS Applied Materials & Interfaces, vol.4, issue.10, pp.5155-5161, 2012.
DOI : 10.1021/am301072s

S. Roland, G. Miquelard-garnier, M. Gervais, A. Guinault, and C. Sollogoub, Controlling the order of triblock copolymer via confinement induced by forced self-assembly, Materials Today Communications, vol.6, issue.6 21, pp.37-43, 2016.
DOI : 10.1016/j.mtcomm.2015.11.003

S. B. Darling, Directing the self-assembly of block copolymers, Progress in Polymer Science, vol.32, issue.10, pp.1152-1204, 2007.
DOI : 10.1016/j.progpolymsci.2007.05.004

L. Leibler, Theory of Microphase Separation in Block Copolymers, Macromolecules, vol.13, issue.6, pp.1602-1617, 1980.
DOI : 10.1021/ma60078a047

C. D. Han, J. Kim, and J. K. Kim, Determination of the order-disorder transition temperature of block copolymers, Macromolecules, vol.22, issue.1, pp.383-394, 1989.
DOI : 10.1021/ma00191a071

T. Gómez-del-río, A. Salazar, R. A. Pearson, and J. Rodríguez, Fracture behaviour of epoxy nanocomposites modified with triblock copolymers and carbon nanotubes, Composites Part B: Engineering, vol.87, pp.343-349, 2016.
DOI : 10.1016/j.compositesb.2015.08.085

R. Bahrami, T. I. Löbling, H. Schmalz, A. H. Müller, and V. Altstädt, Synergistic effects of Janus particles and triblock terpolymers on toughness of immiscible polymer blends, Polymer, vol.109, pp.229-237, 2017.
DOI : 10.1016/j.polymer.2016.12.044

K. Xiang, X. Wang, G. Huang, J. Zheng, J. Huang et al., Thermal ageing behavior of styrene???butadiene random copolymer: A study on the ageing mechanism and relaxation properties, Polymer Degradation and Stability, vol.97, issue.9, pp.1704-1715, 2012.
DOI : 10.1016/j.polymdegradstab.2012.06.015

C. Adam, J. Lacoste, and J. Lemaire, Photo-oxidation of elastomeric materials: Part II???Photo-oxidation of styrene-butadiene copolymer, Polymer Degradation and Stability, vol.26, issue.3, pp.269-284, 1989.
DOI : 10.1016/0141-3910(89)90079-7

S. B. Munteanu, M. Brebu, and C. Vasile, Thermal and thermo-oxidative behaviour of butadiene???styrene copolymers with different architectures, Polymer Degradation and Stability, vol.89, issue.3, pp.501-512, 2005.
DOI : 10.1016/j.polymdegradstab.2005.01.037

E. Serrano, A. Zubeldia, M. Larrañaga, P. Remiro, and I. Mondragon, Effect of different thermal treatments on the self-assembled nanostructures of a styrene???butadiene???styrene star block copolymer, Polymer Degradation and Stability, vol.83, issue.3, pp.495-507, 2004.
DOI : 10.1016/j.polymdegradstab.2003.08.009

S. Roland, G. Miquelard-garnier, M. Gervais, A. Guinault, and C. Sollogoub, Controlling the order of triblock copolymer via confinement induced by forced self-assembly, Materials Today Communications, vol.6, issue.6, pp.37-43, 2016.
DOI : 10.1016/j.mtcomm.2015.11.003

T. Périé, A. Brosse, S. Tencé-girault, and L. Leibler, Mechanical and electrical properties of multi walled carbon nanotube/ABC block terpolymer composites, Carbon, vol.50, issue.8, pp.2918-2928, 2012.
DOI : 10.1016/j.carbon.2012.02.061

W. Stocker, J. Beckmann, R. Stadler, and J. P. Rabe, -methyl methacrylate) Triblock Copolymer:?? A Tapping Mode Scanning Force Microscope Study, Macromolecules, vol.29, issue.23, pp.7502-7507, 1996.
DOI : 10.1021/ma9604000

A. Bironeau, T. Salez, G. Miquelard-garnier, and C. Sollogoub, Existence of a Critical Layer Thickness in PS/PMMA Nanolayered Films, Macromolecules, vol.50, issue.10, pp.4064-4073, 2017.
DOI : 10.1021/acs.macromol.7b00176

URL : https://hal.archives-ouvertes.fr/hal-01577366

M. Coquillat, J. Verdu, X. Colin, L. Audouin, and R. Nevière, Thermal oxidation of polybutadiene. Part 1: Effect of temperature, oxygen pressure and sample thickness on the thermal oxidation of hydroxyl-terminated polybutadiene, Polymer Degradation and Stability, vol.92, issue.7, pp.1326-1333, 2007.
DOI : 10.1016/j.polymdegradstab.2007.03.020

URL : https://hal.archives-ouvertes.fr/hal-00199759

V. Defauchy, Kinetic analysis of polydicyclopentadiene oxidation, Polymer Degradation and Stability, vol.142, pp.169-177, 2017.
DOI : 10.1016/j.polymdegradstab.2017.06.005

C. Adam, J. Lacoste, and J. Lemaire, Photo-oxidation of elastomeric materials. Part 1???Photo-oxidation of polybutadienes, Polymer Degradation and Stability, vol.24, issue.3, pp.185-200, 1989.
DOI : 10.1016/0141-3910(89)90091-8

M. C. Celina, Review of polymer oxidation and its relationship with materials performance and lifetime prediction, Polymer Degradation and Stability, vol.98, issue.12, pp.2419-2429, 2013.
DOI : 10.1016/j.polymdegradstab.2013.06.024

Y. Ouldmetidji, L. Gonon, S. Commereuc, and V. Verney, A differential scanning calorimetry method to study polymer photoperoxidation, Polymer Testing, vol.20, issue.7, pp.765-768, 2001.
DOI : 10.1016/S0142-9418(01)00024-1

E. Richaud, F. Farcas, B. Fayolle, L. Audouin, and J. Verdu, Hydroperoxide titration by DSC in thermally oxidized polypropylene, Polymer Testing, vol.25, issue.6, pp.829-838, 2006.
DOI : 10.1016/j.polymertesting.2006.04.010

S. Commereuc, S. Bonhomme, V. Verney, and J. Lacoste, Photooxidation of polyoctenamer: viscoelastic assessment of gel formation, Polymer, vol.41, issue.3, pp.917-923, 2000.
DOI : 10.1016/S0032-3861(99)00224-4

E. Richaud, F. Farcas, B. Fayolle, L. Audouin, and J. Verdu, Hydroperoxide build-up in the thermal oxidation of polypropylene ??? A kinetic study, Polymer Degradation and Stability, vol.92, issue.1, pp.118-124, 2007.
DOI : 10.1016/j.polymdegradstab.2006.08.010

M. Baba, J. Gardette, and J. Lacoste, Crosslinking on ageing of elastomers: I. Photoageing of EPDM monitored by gel, swelling and DSC measurements, Polymer Degradation and Stability, vol.63, issue.1, pp.121-126, 1999.
DOI : 10.1016/S0141-3910(98)00080-9

P. Claudy, J. M. Létoffé, Y. Camberlain, and J. P. Pascault, Glass transition of polystyrene versus molecular weight, Polymer Bulletin, vol.19, issue.4-5, pp.4-5, 1983.
DOI : 10.1007/BF00283709

X. Lu and B. Jiang, Glass transition temperature and molecular parameters of polymer, Polymer, vol.32, issue.3, pp.471-478, 1991.
DOI : 10.1016/0032-3861(91)90451-N

N. M. Pires, F. M. Coutinho, and M. A. Costa, Synthesis and characterization of high cis-polybutadiene: influence of monomer concentration and reaction temperature, European Polymer Journal, vol.40, issue.11, pp.2599-2603, 2004.
DOI : 10.1016/j.eurpolymj.2004.05.021

R. P. Burford, Polymerization of Butadiene Using Ziegler-Natta Catalysts???Recent Developments, Journal of Macromolecular Science: Part A - Chemistry, vol.2, issue.3, pp.123-139, 1982.
DOI : 10.5254/1.3547426

C. M. Fernyhough, D. Pantazis, S. Pispas, and N. Hadjichristidis, The micellar behavior of linear triblock terpolymers of styrene (S), isoprene (I), and methyl methacrylate (MMA) in selective solvents for PS and PMMA, European Polymer Journal, vol.40, issue.2, pp.237-244, 2004.
DOI : 10.1016/j.eurpolymj.2003.09.025

R. Kabir, Deformation and orientation behavior of polystyrene-b-polybutadiene-b-poly(methyl methacrylate) triblock terpolymers: Influence of polybutadiene microstructures and the molar masses, Polymer, vol.54, issue.2, pp.673-684, 2013.
DOI : 10.1016/j.polymer.2012.11.075

E. M. Hoàng, N. S. Allen, C. M. Liauw, E. Fontán, and P. Lafuente, The thermo-oxidative degradation of metallocene polyethylenes. Part 1: Long-term thermal oxidation in the solid state, Polymer Degradation and Stability, vol.91, issue.6, pp.1356-1362, 2006.
DOI : 10.1016/j.polymdegradstab.2005.07.017

E. T. Denisov and I. B. Afanas-'ev, Chain Mechanism of Liquid-Phase Oxidation of Hydrocarbons. Table 3, Oxidation and Antioxidants in Organic Chemistry and Biochemistry, p.142, 2005.

M. Coquillat, J. Verdu, X. Colin, L. Audouin, and R. Nevière, Thermal oxidation of polybutadiene. Part 3: Molar mass changes of additive-free non-crosslinked polybutadiene, Polymer Degradation and Stability, vol.92, issue.7, pp.1343-1349, 2007.
DOI : 10.1016/j.polymdegradstab.2007.03.018

URL : https://hal.archives-ouvertes.fr/hal-00199759

A. Akba?, S. Aksoy, and N. Has?rc?, Effects of thermal ageing on the properties and lifetime prediction of hydroxyl-terminated polybutadiene, Polymer, vol.35, issue.12, pp.2568-2572, 1994.
DOI : 10.1016/0032-3861(94)90380-8

E. F. Rettler, UV-induced crosslinking of the polybutadiene domains in lamellar polystyrene-block-polybutadiene block copolymer films ??? An in-depth study, Polymer, vol.53, issue.25, pp.5641-5648, 2012.
DOI : 10.1016/j.polymer.2012.09.054

R. Broska, N. C. Billingham, and P. K. Fearon, Accelerating effect of poly(methyl methacrylate) on rubber oxidation, Part 1: A chemiluminescence study, Polymer Degradation and Stability, vol.93, issue.6, pp.1100-1108, 2008.
DOI : 10.1016/j.polymdegradstab.2008.03.012

G. Miquelard-garnier and S. Roland, Beware of the Flory parameter to characterize polymer-polymer interactions: A critical reexamination of the experimental literature, European Polymer Journal, vol.84, pp.111-124, 2016.
DOI : 10.1016/j.eurpolymj.2016.09.009

J. Gardette, B. Mailhot, and J. Lemaire, Photooxidation mechanisms of styrenic polymers, Polymer Degradation and Stability, vol.48, issue.3, pp.457-470, 1995.
DOI : 10.1016/0141-3910(95)00113-Z

M. Piton and A. Rivaton, Photooxidation of polybutadiene at long wavelengths (?? > 300 nm), Polymer Degradation and Stability, vol.53, issue.3, pp.343-359, 1996.
DOI : 10.1016/0141-3910(96)00093-6

J. Kowalonek, Surface studies of UV-irradiated poly(vinyl chloride)/poly(methyl methacrylate) blends, Polymer Degradation and Stability, vol.133, pp.367-377, 2016.
DOI : 10.1016/j.polymdegradstab.2016.09.016

D. E. Roberts, Heats of polymerization - a summary of published values and their relation to structure, Journal of Research of the National Bureau of Standards, vol.44, issue.3, pp.221-232, 1950.
DOI : 10.6028/jres.044.021

W. Kaminsky, M. Predel, and A. Sadiki, Feedstock recycling of polymers by pyrolysis in a fluidised bed, Polymer Degradation and Stability, vol.85, issue.3, pp.1045-1050, 2004.
DOI : 10.1016/j.polymdegradstab.2003.05.002

G. Madras and V. Karmore, Continuous distribution kinetics for oxidative degradation of PMMA in solution, Polymer Degradation and Stability, vol.72, issue.3, pp.537-541, 2001.
DOI : 10.1016/S0141-3910(01)00056-8

M. Celina, D. K. Ottesen, K. T. Gillen, and R. L. Clough, FTIR emission spectroscopy applied to polymer degradation, Polymer Degradation and Stability, vol.58, issue.1-2, pp.15-31, 1997.
DOI : 10.1016/S0141-3910(96)00218-2

E. T. Denisov and I. B. Afanas-'ev, Chain Mechanism of Liquid-Phase Oxidation of Hydrocarbons, Oxidation and Antioxidants in Organic Chemistry and Biochemistry, p.67, 2005.

F. Vilaplana, A. Ribes-greus, and S. Karlsson, Degradation of recycled high-impact polystyrene. Simulation by reprocessing and thermo-oxidation, Polymer Degradation and Stability, vol.91, issue.9, pp.2163-2170, 2006.
DOI : 10.1016/j.polymdegradstab.2006.01.007

E. Helfand and Y. Tagami, Theory of the interface between immiscible polymers, Journal of Polymer Science Part B: Polymer Letters, vol.9, issue.10, pp.741-746, 1971.
DOI : 10.1002/pol.1971.110091006

F. Saulnier, Dynamic processes at polymeric interfaces, 2003.
URL : https://hal.archives-ouvertes.fr/tel-00009740

L. C. Sawyer and D. T. Grubb, Specimen preparation methods, Polymer Microscopy, pp.83-173, 1996.
DOI : 10.1007/978-94-015-8595-8_4

A. Ruzette, Molecular Disorder and Mesoscopic Order in Polydisperse Acrylic Block Copolymers Prepared by Controlled Radical Polymerization, Macromolecules, vol.39, issue.17, pp.5804-5814, 2006.
DOI : 10.1021/ma060541u

URL : https://hal.archives-ouvertes.fr/hal-00096984

A. Bironeau, Films multinanocouches de polymères amorphes coextrudés : élaboration, caractérisation et stabilité des nanocouches

R. Valette, P. Laure, Y. Demay, and A. Fortin, Convective Instabilities in the Coextrusion Process, International Polymer Processing, vol.16, issue.2, pp.192-197, 2001.
DOI : 10.3139/217.1635

URL : https://hal.archives-ouvertes.fr/hal-01480072

R. Valette, P. Laure, Y. Demay, and J. Agassant, Convective linear stability analysis of two-layer coextrusion flow for molten polymers, Journal of Non-Newtonian Fluid Mechanics, vol.121, issue.1, pp.41-53, 2004.
DOI : 10.1016/j.jnnfm.2004.04.002

URL : https://hal.archives-ouvertes.fr/hal-00015338

R. Ramanathan, W. J. Schrenk, and J. A. Wheatley, Coextrusion of multilayer articles using protective boundary layers and apparatus therefor, 1993.

W. J. Schrenk, N. L. Bradley, T. Alfrey, and H. Maack, Interfacial flow instability in multilayer coextrusion, Polymer Engineering and Science, vol.30, issue.8, pp.620-623, 1978.
DOI : 10.1002/pen.760180803

C. , D. Han, and R. Shetty, Studies on multilayer film coextrusion II. Interfacial instability in flat film coextrusion, Polymer Engineering & Science, vol.18, pp.180-186, 1978.
DOI : 10.1002/pen.760161008

R. Ramanathan, R. Shanker, T. Rehg, S. Jons, D. L. Headley et al., Wave Pattern Instability in Multilayer Coextrusion -An Experimental Investigation, SPE-ANTEC tech. papers, vol.54, p.224, 1996.

R. Valette, P. Laure, Y. Demay, and J. Agassant, Investigation of the Interfacial Instabilities in the Coextrusion Flow of PE and PS, International Polymer Processing, vol.18, issue.2, pp.171-178, 2003.
DOI : 10.3139/217.1731

URL : https://hal.archives-ouvertes.fr/hal-00613066

J. Dooley, Viscoelastic flow effects in multilayer polymer coextrusion, 2002.

M. A. Multer-arvedson, Rheological Considerations in Coextrusion, Conclusion générale et Perspectives 205, pp.22-29, 1985.
DOI : 10.1002/pen.760191605