Internet address : http://www.wikipedia.org ,
Rubber model for adhesive lap joints, Journal of Strain Analysis, vol.44, issue.1, pp.52-57, 1973. ,
DOI : 10.1088/0508-3443/9/2/306
Structural adhesive joints in engineering, 1997. ,
DOI : 10.1007/978-94-009-5616-2
Strength prediction of bonded single lap joints by non-linear finite element methods, International Journal of Adhesion and Adhesives, vol.4, issue.2, pp.65-78, 1984. ,
A Method for the Stress Analysis of Lap Joints, The Journal of Adhesion, vol.4, issue.2, pp.199-217, 1992. ,
DOI : 10.1080/00218468108073182
Effect of poisson's ratio strains in adherends on stresses of an idealized lap joint. The journal of strain analysis for engineering design, pp.134-139, 1973. ,
Stress analysis of adhesive-bonded lap joints. The journal of strain analysis for engineering design, pp.185-196, 1974. ,
Structural Adhesive Joints in Engineering, 1984. ,
DOI : 10.1007/978-94-009-5616-2
On the influence of the shape of the interface law on the application of cohesive-zone models, Composites Science and Technology, vol.66, issue.6, pp.723-730, 2006. ,
DOI : 10.1016/j.compscitech.2004.12.024
A simple stress analysis method for adhesive bonded tapered joints, International Journal of Adhesion and Adhesives, vol.9, issue.3, pp.155-160, 1989. ,
DOI : 10.1016/0143-7496(89)90111-5
On the effective constitutive properties of a thin adhesive layer loaded in peel, International Journal of Fracture, vol.47, issue.1-2, pp.227-246, 2006. ,
DOI : 10.1115/1.3601206
Two- and three-dimensional geometrical nonlinear finite elements for analysis of adhesive joints, International Journal of Adhesion and Adhesives, vol.21, issue.1, pp.17-34, 2001. ,
DOI : 10.1016/S0143-7496(00)00024-5
Analysis and Design of Composite-to-Metal Adhesively Bonded Joints, 2012. ,
Finite element predictions of composite-to-metal bonded joints with ductile adhesive materials, Composite Structures, vol.94, issue.8, pp.2632-2639, 2012. ,
DOI : 10.1016/j.compstruct.2012.03.002
Investigation of elastic stresses in an adhesively bonded single lap joint with functionally graded adherends in tension, Composite Structures, vol.70, issue.4, pp.444-467, 2005. ,
DOI : 10.1016/j.compstruct.2004.09.004
Elastic flexural behaviour of an adhesively bonded single lap joint with functionally graded adherends, Materials & Design, vol.28, issue.5, pp.1597-1617, 2007. ,
DOI : 10.1016/j.matdes.2006.02.013
Curve adhesive joints, Composite Structures, vol.94, issue.8, pp.2657-2664, 2012. ,
DOI : 10.1016/j.compstruct.2012.03.024
Fatigue Load Conditions, Handbook of Adhesion Technology, 2011. ,
The effects of adhesive thickness, surface roughness and overlap distance on joint strength in prismatic plug-in joints attached with adhesive, International Journal of the Physical Sciences, vol.7, issue.17, pp.2580-2586, 2012. ,
The formation of equilibrium cracks during brittle fractures. general ideas and hypothesis. axisymmetrical crakcs, Journal of Applied Mathematics, vol.23, issue.7, pp.622-636, 1959. ,
The Mathematical Theory of Equilibrium Cracks in Brittle Fracture, Journal of Advanced Applied Mechanics, vol.7, issue.7, pp.55-129, 1962. ,
DOI : 10.1016/S0065-2156(08)70121-2
Fracture reliability of structural adhesives, Journal of applied polymer science. Applied polymer symposium, vol.32, pp.165-188, 1977. ,
Investigating the effect of spew and chamfer size on the stresses in metal/plastics adhesive joints, International Journal of Adhesion and Adhesives, vol.22, issue.4, pp.273-282, 2002. ,
DOI : 10.1016/S0143-7496(02)00004-0
Accelerated ageing behaviour of the adhesive bond between concrete specimens and cfrp overlays. Construction and building materials, pp.523-538, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-00594585
Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus, Composites Science and Technology, vol.56, issue.4, pp.439-449, 1996. ,
DOI : 10.1016/0266-3538(96)00005-X
Fatigue Crack Growth Monitoring in Composite Bonded Lap Joints by a Distributed Fibre Optic Sensing System and Comparison with Ultrasonic Testing, The Journal of Adhesion, vol.67, issue.14, pp.739-757, 2016. ,
DOI : 10.1007/978-3-319-07272-2
Vieillissement hygrothermique d'un assemblage acier galvanisé / adhésifadhésifépoxy : ´ evolution de la tenue mécanique en fonction de l'´ etat physico-chimique de l'adhésif, 2011. ,
ContributionàContributionà l'analyse expérimentale et théorique des ruptures de structures composites en post-flambement par décollement de raidisseurs, 2008. ,
The Science of Adhesive Joints, 1961. ,
The fracture behaviour of adhesively-bonded composite joints: Effects of rate of test and mode of loading, International Journal of Solids and Structures, vol.49, issue.13, pp.1434-1452537, 1999. ,
DOI : 10.1016/j.ijsolstr.2012.02.022
Modulus grading versus geometrical grading of composite adherends in single-lap bonded joints, Composite Structures, vol.62, issue.1, pp.113-121, 2003. ,
DOI : 10.1016/S0263-8223(03)00097-7
Etude du comportement d'une colle dans un assemblage : Comparaison de différents essais, 2009. ,
Mesure par thermographie infra-rouge du taux de restitution d'´ energie critique d'interfaces de composites stratifiés ud et tissés, 2017. ,
Effect of load ratio and maximum stress intensity on the fatigue threshold in Ti???6Al???4V, Engineering Fracture Mechanics, vol.68, issue.2, pp.129-147, 2001. ,
DOI : 10.1016/S0013-7944(00)00099-0
Familles d'adhésifs et caractérisation d'un collage structural, pp.1-16, 2005. ,
Adhesive Bonding -Materials, Applications and Technology, 2005. ,
Durabilité des assemblages collés : modélisation mécanique et physicochimique, Ecole Nationale des Ponts et Chaussées, 2004. ,
Degradation thermique et fluage d'un adhésif structural epoxyde, 2000. ,
An updated review of adhesively bonded joints in composite materials, International Journal of Adhesion and Adhesives, vol.72, pp.30-42, 2017. ,
DOI : 10.1016/j.ijadhadh.2016.10.010
Mixed-mode decohesion finite elements for the simulation of delamination in composite materials. NASA-TM, pp.1-37, 2002. ,
Modelling single and double-lap repairs on composite materials, Composites Science and Technology, vol.65, issue.13, pp.1948-1958, 2005. ,
DOI : 10.1016/j.compscitech.2005.04.007
Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs, International Journal of Solids and Structures, vol.45, issue.5, pp.1497-1512, 2008. ,
DOI : 10.1016/j.ijsolstr.2007.10.003
Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes, International Journal of Adhesion and Adhesives, vol.29, issue.2, pp.195-205, 2009. ,
DOI : 10.1016/j.ijadhadh.2008.03.005
Comparative Evaluation of Single-lap Joints Bonded with Different Adhesives by Cohesive Zone Modelling, Procedia Engineering, vol.114, pp.102-109, 2015. ,
DOI : 10.1016/j.proeng.2015.08.047
Evaluation of different modelling conditions in the cohesive zone analysis of single-lap bonded joints, The Journal of Adhesion, pp.1-21, 2017. ,
Le collage en France, un atout pour l'assemblage industriel, 2002. ,
Viscoelastic analysis of bonded connections, Computers & Structures, vol.36, issue.6, pp.1141-1152, 1990. ,
DOI : 10.1016/0045-7949(90)90223-O
Boundary element modeling and analysis of adhesive bonded structural joints, Electronic Journal of Boundary Elements, vol.4, issue.1, pp.31-48, 2006. ,
DOI : 10.14713/ejbe.v4i1.773
Shear fracture, International Journal of Fracture, vol.37, pp.137-159, 1988. ,
Experimental evaluation of mixed-mode fracture in adhesive bonds, Experimental Mechanics, vol.34, issue.4, pp.296-303, 1992. ,
DOI : 10.1177/002199837200600202
Some issues in the application of cohesive zone models for metal???ceramic interfaces, International Journal of Solids and Structures, vol.39, issue.10, pp.2827-2855, 2002. ,
DOI : 10.1016/S0020-7683(02)00149-X
Conception et dimensionnement d'un ancrage de hauban plat en matériaux composites, Ecole Nationale des Ponts et Chaussées, 2008. ,
Essai de cisaillementàcisaillementà simple recouvrement pour caractériser l'adhérence de renforts composites collés sur substrat béton -méthode d'essai n.72, 2010. ,
Optimisation of the shear stress transfer in structural bonded assemblies using a curved bonded joint geometry. Construction and building materials, pp.442-451, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-00526094
Non-linear failure criteria for a double lap bonded joint, International Journal of Adhesion and Adhesives, vol.30, issue.1, pp.10-20, 2010. ,
DOI : 10.1016/j.ijadhadh.2009.06.007
URL : https://hal.archives-ouvertes.fr/hal-00451129
Experimental and numerical investigation of shear strain along an elasto-plastic bonded lap joint. Construction and building materials, pp.432-441, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-00595678
Fatigue crack growth in adhesively bonded composite-metal double-lap joints, Composite Structures, vol.57, issue.1-4, pp.109-115, 2002. ,
DOI : 10.1016/S0263-8223(02)00074-0
Le collage : Etat des connaissances et perspectives, 1994. ,
Analysis of the nonlinear behavior of adhesives in bonded assemblies???Comparison of TAST and Arcan tests, International Journal of Adhesion and Adhesives, vol.28, issue.8, pp.393-404, 2008. ,
DOI : 10.1016/j.ijadhadh.2008.04.006
Influence of adhesive thickness on the behaviour of bonded assemblies under shear loadings using a modified TAST fixture, International Journal of Adhesion and Adhesives, vol.30, issue.5, pp.257-266, 2010. ,
DOI : 10.1016/j.ijadhadh.2009.11.003
URL : https://hal.archives-ouvertes.fr/hal-00489162
Development of an improved adhesive test method for composite assembly design, Composites Science and Technology, vol.65, issue.3-4, pp.359-368, 2005. ,
DOI : 10.1016/j.compscitech.2004.09.008
A study of the non-linear behaviour of adhesively-bonded composite assemblies, Composite Structures, vol.76, issue.1-2, pp.34-46, 2003. ,
DOI : 10.1016/j.compstruct.2006.06.006
URL : https://hal.archives-ouvertes.fr/hal-00493242
Fatigue behaviour of tensile steel/CFRP joints, Composite Structures, vol.94, issue.8, pp.2407-2417, 2012. ,
DOI : 10.1016/j.compstruct.2012.03.001
The Theory of Wetting, and the Determination of the Wetting Power of Dipping and Spraying Fluids containing a Soap Basis, The Journal of Agricultural Science, vol.II, issue.02, pp.219-239, 1915. ,
DOI : 10.1002/andp.18882711203
Le collage structural moderne, 1992. ,
Assessing stress state and mean load effects on the fatigue response of adhesively bonded joints, International Journal of Adhesion and Adhesives, vol.19, pp.19-27, 1999. ,
Elastic analysis and engineering design formulae for bonded joints, International Journal of Adhesion and Adhesives, vol.9, issue.4, pp.229-242, 1989. ,
Non-linear adhesive bonded joint design analyses, International Journal of Adhesion and Adhesives, vol.10, issue.1, pp.31-41, 1990. ,
Development of a full elasto-plastic adhesive joint design analysis, The Journal of Strain Analysis for Engineering Design, vol.109, issue.4, pp.211-218, 1992. ,
DOI : 10.1016/0143-7496(90)90100-C
Techniques to reduce the peel stresses in adhesive joints with composites, International Journal of Adhesion and Adhesives, vol.27, issue.3, pp.227-235, 2007. ,
DOI : 10.1016/j.ijadhadh.2006.04.001
Advances in Numerical Modelling of Adhesive Joints, 2012. ,
DOI : 10.1007/978-3-642-23608-2_1
Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints, International Journal of Adhesion and Adhesives, vol.29, issue.6, pp.621-632, 2009. ,
DOI : 10.1016/j.ijadhadh.2009.02.012
Analytical models of adhesively bonded joints???Part I: Literature survey, International Journal of Adhesion and Adhesives, vol.29, issue.3, pp.319-330, 2009. ,
DOI : 10.1016/j.ijadhadh.2008.06.005
Analytical models of adhesively bonded joints???Part II: Comparative study, International Journal of Adhesion and Adhesives, vol.29, issue.3, pp.331-341, 2009. ,
DOI : 10.1016/j.ijadhadh.2008.06.007
Modeling of Adhesively bonding Joints, 2008. ,
Adhésion et adhérence, 2003. ,
Effects of Friction, Geometry, and Fixture Compliance on the Perceived Toughness from Three-and Four-Point Bend End-Notched Flexure Tests, Journal of Reinforced Plastics and Composites, vol.24, issue.15, pp.1611-1628, 2005. ,
DOI : 10.1023/A:1012269526170
Influence of adhesive bond line thickness on joint strength, International Journal of Adhesion and Adhesives, vol.29, issue.7, pp.724-736, 2009. ,
DOI : 10.1016/j.ijadhadh.2009.03.002
URL : https://hal.archives-ouvertes.fr/hal-00494459
The strength of glued joints. Aircraft Engineering and Aerospace Technology, pp.115-118, 1944. ,
Cohesive zone modeling of interfacial stresses in plated beams, International Journal of Solids and Structures, vol.46, issue.24, pp.4181-4191, 2009. ,
DOI : 10.1016/j.ijsolstr.2009.08.010
A straightforward method to obtain the cohesive laws of bonded joints under mode I loading, International Journal of Adhesion and Adhesives, vol.39, pp.54-59, 2012. ,
DOI : 10.1016/j.ijadhadh.2012.07.008
Fiabilité et micromécanique des matériaux composites -ApplicationàApplicationà la passerelle de Laroin, 2007. ,
Investigation on the use of rubber analogue in the study of the stress distribution in riveted and cemented joint, 1955. ,
Fatigue performance of metallic beam strengthened with a bonded CFRP plate, Composite Structures, vol.78, issue.2, pp.222-231, 2007. ,
DOI : 10.1016/j.compstruct.2005.09.003
Effect of plate end and adhesive spew geometries on stresses in retrofitted beams bonded with a CFRP plate, Composites Part B: Engineering, vol.39, issue.4, pp.731-739, 2008. ,
DOI : 10.1016/j.compositesb.2007.05.004
and as Bulk Material, The Journal of Adhesion, vol.10, issue.4, pp.283-294, 1981. ,
DOI : 10.1016/0143-7496(81)90036-1
Mechanical behavior of materials -engineering methods for deformation, fracture, and fatigue, International Journal of Fatigue, vol.19, issue.3, pp.269-270, 1997. ,
Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-104, 1960. ,
DOI : 10.1016/0022-5096(60)90013-2
Développement en dynamique d'unélémentunélément fini multicouche avec interfaces imparfaites, Ecole Nationale des Ponts et Chaussées, 2008. ,
A geometrically nonlinear model of the adhesive joint problem and its numerical treatment, Computer Methods in Applied Mechanics and Engineering, vol.96, issue.3, pp.329-350, 1992. ,
DOI : 10.1016/0045-7825(92)90069-V
Prediction of energy release rates for crack growth using FEM-based energy derivative technique, Engineering Fracture Mechanics, vol.74, issue.8, pp.1243-1254, 2007. ,
DOI : 10.1016/j.engfracmech.2006.07.014
Cohesive zone with continuum damage properties for simulation of delamination development in fibre composites and failure of adhesive joints, Engineering Fracture Mechanics, vol.75, issue.13, pp.3866-3880, 2008. ,
DOI : 10.1016/j.engfracmech.2008.02.010
Etude de la modélisation de la pose et de la tenue mécanique des assemblages par déformation plastique -Application au rivetage autopoinçonneur, 2008. ,
Analysis of adhesive bonded fiber-reinforced composite joints, 2001. ,
Guidelines for determining finite element cohesive material parameters ,
Endommagements et rupture de matériaux Water effects on the bond strength of concrete/concrete adhesive joints. Construction and building materials, pp.957-970, 2004. ,
Analysis of Adhesive-Bonded Joints, Square-End, and Spew-Fillet???High-Order Theory Approach, Journal of Engineering Mechanics, vol.125, issue.11, pp.1298-1307, 1999. ,
DOI : 10.1061/(ASCE)0733-9399(1999)125:11(1298)
Modulus Graded Composite Adherends for Single-Lap Bonded Joints, Journal of Composite Materials, vol.7, issue.14, pp.1757-1767, 2002. ,
DOI : 10.1023/A:1007669219149
Deformation of balanced and unbalanced adhesively bonded single-lap joints, 2000. ,
Matériaux composites, Hermes, 1989. ,
The stresses in cemented joints, Journal of Applied Mechanics, vol.11, pp.17-27, 1944. ,
Analysis and optimization of adhesively bonded joints. Master's thesis, 2000. ,
A three-dimensional finite element model for stress analysis of adhesive joints, International Journal of Adhesion and Adhesives, vol.22, issue.5, pp.357-365, 2002. ,
DOI : 10.1016/S0143-7496(02)00015-5
Durabilité des assemblages collés du génie civil : Effets du vieillissement hygrothermique auxéchellesauxéchelles micro-et macroscopiques, 2006. ,
The application of the iosipescu shear test to structural adhesives, Journal of Applied Polymer Science, vol.43, issue.11, pp.2033-2042, 1991. ,
DOI : 10.1002/app.1991.070431110
Experimental and numerical analysis of single-lap joints for the automotive industry, International Journal of Adhesion and Adhesives, vol.29, issue.4, pp.405-413, 2009. ,
DOI : 10.1016/j.ijadhadh.2008.09.001
Mécanismes d'adhésion sur tôles grasses et tenue mécanique en milieu humide, 2000. ,
Applied Adhesive Bonding -A Practical Guide for Flawless Results, 2009. ,
Modélisation des assemblages collés : applicationàapplicationà l'optimisation du transfert des efforts par cisaillement, Ecole Nationale des Ponts et Chaussées, 1999. ,
Probabilistic analysis of failure in adhesive bonded joints, Mechanics of Materials, vol.33, issue.2, pp.77-84, 2001. ,
DOI : 10.1016/S0167-6636(00)00051-X
Stress analysis in adhesive joints with a multiparticle model of multilayered materials (M4), International Journal of Adhesion and Adhesives, vol.21, issue.4, pp.297-307, 2001. ,
DOI : 10.1016/S0143-7496(00)00034-8
Réparation et renforcement des structures en béton au moyen des matériaux composites -recommandations provisoires, AFGC -Documents scientifiques et techniques, 2003. ,
Adhesive-bonded double-lap joints, 1973. ,
Adhesive-bonded single-lap joints, 1973. ,
Progress in the technique of upgrading metallic structures with advanced polymer composites, Progress in Structural Engineering and Materials, vol.45, issue.2, pp.131-148, 2002. ,
DOI : 10.1533/9781855737617
Fatigue polycyclique des structures métalliques : durée de vie sous chargements variables, 2006. ,
Adhésion des polymères -cristallinité et mobilité de surface, Proceedings of the 12èmes journées d'Etude sur l'adhésion, 2003. ,
Effects of adhesive thickness on global and local Mode-I interfacial fracture of bonded joints, International Journal of Solids and Structures, vol.47, issue.18-19, pp.2445-2458, 2010. ,
DOI : 10.1016/j.ijsolstr.2010.05.006
Use of the thick adherend shear test for shear stress-strain measurements of stiff and flexible adhesives, The Journal of Adhesion, vol.78, issue.5, pp.355-381, 2002. ,
DOI : 10.1080/00218460211818
The effects of geometry and material properties on the fracture of single lap-shear joints, International Journal of Solids and Structures, vol.39, issue.17, pp.4367-4383, 2002. ,
DOI : 10.1016/S0020-7683(02)00344-X
Through-thickness shape optimisation of typical double lap-joints including effects of differential thermal contraction during curing, International Journal of Adhesion and Adhesives, vol.25, issue.3, pp.227-238, 2005. ,
DOI : 10.1016/j.ijadhadh.2004.07.006
Influence of adhesive spew in bonded single-lap joints, Engineering Fracture Mechanics, vol.73, issue.11, pp.1472-1490, 2006. ,
DOI : 10.1016/j.engfracmech.2005.12.015
Simulation of adhesive joints using the superimposed finite element method and a cohesive zone model, International Journal of Adhesion and Adhesives, vol.31, issue.5, pp.357-362, 2011. ,
DOI : 10.1016/j.ijadhadh.2010.11.015
Adhesion and Adhesives : Science and Technology, 1987. ,
DOI : 10.1007/978-94-015-7764-9
The Fracture Resistance of a Toughened Epoxy Adhesive, The Journal of Adhesion, vol.14, issue.4, pp.59-77, 1981. ,
DOI : 10.1007/BF00032383
Comparison of 2D finite element modeling assumptions with results from 3D analysis for composite skin-stiffener debonding, Composite Structures, vol.57, issue.1-4, pp.161-168, 2002. ,
DOI : 10.1016/S0263-8223(02)00079-X
Enhancing fatigue resistance and damage characterisation in adhesively-bonded composite joints by carbon nanofibres, Composites Science and Technology, vol.149, pp.116-126, 2017. ,
DOI : 10.1016/j.compscitech.2017.06.018
Effect of spew geometry on stresses in single lap adhesive joints, International Journal of Adhesion and Adhesives, vol.18, issue.3, pp.167-177, 1998. ,
DOI : 10.1016/S0143-7496(97)00056-0
Etude de la propagation d'une fissure sous chargement thermique cyclique induisant un gradient de température dans l'´ epaisseur, 2009. ,
Determination of cohesive parameters for a mixed-mode cohesive zone model, pp.322-328, 2010. ,
La rupture des matériaux, 2003. ,
A finite element model of single-lap adhesive joints, International Journal of Solids and Structures, vol.30, issue.12, pp.1679-1692, 1993. ,
New accurate procedure for single shear testing of metals, Journal of Materials, vol.2, pp.537-566, 1967. ,
Analytical solutions for adhesive composite joints considering large deflection and transverse shear deformation in adherends, International Journal of Solids and Structures, vol.45, issue.22-23, pp.5914-5935, 2008. ,
DOI : 10.1016/j.ijsolstr.2008.07.001
On Adhesives and Adhesive Action, The Journal of Physical Chemistry, vol.29, issue.2, pp.188-204, 1925. ,
DOI : 10.1021/j150248a008
Numerical study of anchors for composite prestressing straps, Composite Structures, vol.35, issue.3, pp.323-330, 1996. ,
DOI : 10.1016/0263-8223(96)00045-1
Adhesives in civil engineering, 2005. ,
DOI : 10.1017/CBO9780511529597
The creep behaviour of adhesives a numerical and experimental investigation, 2007. ,
Extended finite element method for cohesive crack growth, Engineering Fracture Mechanics, vol.69, issue.7, pp.813-833, 2002. ,
DOI : 10.1016/S0013-7944(01)00128-X
URL : https://hal.archives-ouvertes.fr/hal-01006858
Fracture toughness of an epoxy system, Journal of Applied Polymer Science, vol.10, issue.9, pp.1351-1371, 1966. ,
DOI : 10.1002/app.1966.070100913
Double-lap adhesive bonded-joints assemblies modeling, International Journal of Adhesion and Adhesives, vol.30, issue.5, pp.288-297, 2010. ,
DOI : 10.1016/j.ijadhadh.2010.02.006
Modèle d'endommagement des assemblages collées : identification et applicationà applicationà la description d'un essai de vieillissement accéléré, 2008. ,
Modélisation globale et locale des structures multicouches parélémentsparéléments finis de plaque, Ecole Nationale des Ponts et Chaussées, 2004. ,
Handbook of Adhesion Technology, 2011. ,
An evaluation of the elastic properties of an adhesive layer using the tensile-butt joint test: Procedures and error estimates, International Journal of Adhesion and Adhesives, vol.27, issue.2, pp.129-135, 2007. ,
DOI : 10.1016/j.ijadhadh.2006.01.003
A new evaluation procedure for the butt-joint test of adhesive technology: Determination of the complete set of linear elastic constants, International Journal of Adhesion and Adhesives, vol.27, issue.8, pp.703-711, 2007. ,
DOI : 10.1016/j.ijadhadh.2006.12.003
Bond Thickness Effects upon Stresses in Single-Lap Adhesive Joints, AIAA Journal, vol.1, issue.3, pp.204-211, 1978. ,
DOI : 10.2514/3.60878
A layered beam theory for single lap joints, 1991. ,
Effects of adherend deflections in singlelapjoints, International Journal of Solids and Structures, issue.18, pp.312565-2587, 1994. ,
Computational analysis of geometric nonlinear effects in adhesively bonded single lap composite joints, Composites Part B: Engineering, vol.34, issue.5, pp.417-427, 2003. ,
DOI : 10.1016/S1359-8368(03)00023-4
A new finite element method integrating extrinsic and intrinsic cohesive zone models ,
Contribution aux assemblages hybrides (boulonnés/collés) -Application aux jonctions aéronautiques, 2006. ,
Durabilité des assemblages collés etude . Techniques de l'Ingénieur, Corrosion et vieillissement : phénomènes et mécanismes, 2005. ,
Durabilité mécanique du collage blanc sur noir dans les chaussées, 2004. ,
Le collage : une technique d'assemblage industrielle. JITEC : La lettre d'Aramm ,
Failure criteria for adhesively bonded joints, International Journal of Adhesion and Adhesives, 2012. ,
Variable amplitude fatigue of adhesively-bonded pultruded GFRP joints, International Journal of Fatigue, vol.55, pp.22-32, 2013. ,
DOI : 10.1016/j.ijfatigue.2013.04.024
Analysis of composite bonded joints, Fibre Science And Technology, vol.17, pp.77-90, 1982. ,
Non-linear analysis of adhesively bonded joints, International Journal of Non-Linear Mechanics, vol.23, issue.2, pp.97-112, 1988. ,
DOI : 10.1016/0020-7462(88)90017-0
Influence of superposition length on mechanical resistance of single-lap adhesive joints, Composite Structures, vol.67, issue.1, pp.125-133, 2005. ,
DOI : 10.1016/j.compstruct.2004.01.018
Comportement en fatigue depì ecesépaissesecesépaisses en matériaux composites, 2011. ,
Numerical stress analysis of carbon-fibrereinforced epoxy composite single-lap joints, International Journal of Adhesion and Adhesives, issue.5, pp.31331-337, 2011. ,
Crack Propagation in Polymer Adhesive/Glass Sandwich Specimens, The Journal of Adhesion, vol.49, issue.1-2, pp.97-112, 1995. ,
DOI : 10.1115/1.2899520
A finite element calculation of stress intensity factors by a modified crack closure integral, Engineering Fracture Mechanics, vol.9, issue.4, pp.931-938, 1977. ,
DOI : 10.1016/0013-7944(77)90013-3
A parametric study on the failure of bonded single-lap joints of carbon composite and aluminum, Composite Structures, vol.86, issue.1-3, pp.1-3135, 2008. ,
DOI : 10.1016/j.compstruct.2008.03.026
Fully Plastic Crack Problems, Part 1: Solutions by a Penalty Method, Journal of Applied Mechanics, vol.51, issue.1, pp.48-56, 1984. ,
DOI : 10.1115/1.3167596
Fully plastic crack problems. ii. application of consistency checks, pp.57-64, 1984. ,
Measurement of adhesion using the island blister test, 1994. ,
Assemblage par collage Techniques de l'Ingénieur, traité plastiques et composites, Doc A 3758, pp.1-16, 1994. ,
A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material, Engineering Fracture Mechanics, vol.73, issue.18, pp.2829-2848, 2006. ,
DOI : 10.1016/j.engfracmech.2006.04.030
Efficient modelling of complex adhesively bonded structures by standard finite element techniques, 2010. ,
Modeling holes and inclusions by level sets in the extended finite-element method, Computer Methods in Applied Mechanics and Engineering, vol.190, issue.46-47, pp.46-476183, 2001. ,
DOI : 10.1016/S0045-7825(01)00215-8
URL : https://hal.archives-ouvertes.fr/hal-01007065
Investigation of thick bondline adhesive joints, 2001. ,
Stresses in bonded repair to cylindrically curved shell structures, 2000. ,
Nonlinear stress analysis for bonded patch to curved thin-walled structures, International Journal of Adhesion and Adhesives, vol.23, issue.5, pp.349-364, 2003. ,
DOI : 10.1016/S0143-7496(03)00063-0
An evaluation of analytical and numerical solutions to the singlelap joint, International Journal of Solids and Structures, issue.18, pp.312537-2563, 1994. ,
Three-dimensional deformations in a single-lap joint, The Journal of Strain Analysis for Engineering Design, vol.11, issue.2, pp.137-145, 1994. ,
DOI : 10.1016/0167-8442(90)90010-W
The effect of a spew fillet on adhesive stress distributions in laminated composite single-lap joints, Composite Structures, vol.32, issue.1-4, pp.1-4123, 1995. ,
DOI : 10.1016/0263-8223(95)00059-3
Improved theoretical solutions for adhesive lap joints, International Journal of Solids and Structures, vol.35, issue.12, pp.1163-1185, 1998. ,
DOI : 10.1016/S0020-7683(97)00097-8
Simulation of delamination in composites under high-cycle fatigue, Composites Part A: Applied Science and Manufacturing, vol.38, issue.11, pp.2270-2282, 2007. ,
DOI : 10.1016/j.compositesa.2006.11.009
Adhesively bonded lap joints of pultruded GFRP shapes, 2004. ,
Adhesively bonded lap joints from pultruded GFRP profiles. Part III: Effects of chamfers, Composites Part B: Engineering, vol.37, issue.4-5, pp.328-336, 2006. ,
DOI : 10.1016/j.compositesb.2005.11.002
Test methods for determining shear property data for adhesives suitable for design. part 3 : The thick adherend test method, 1996. ,
Die nietkraft verteilung in zugbeanspruchten mit konstanten laschenquerschritten, Luftfahrtforschung, vol.15, pp.41-47, 1938. ,
Analytical and numerical study of cohesive zones for a crack in an adhesive layer between identical isotropic materials, Engineering Fracture Mechanics, vol.77, issue.13, pp.2577-2592, 2010. ,
DOI : 10.1016/j.engfracmech.2010.06.019
Autohesion and adhesion of high polymers, 1963. ,
The losipescu shear test as applied to composite materials, Experimental Mechanics, vol.13, issue.2, pp.105-110, 1983. ,
DOI : 10.1177/002199837200600411
Further development of the iosipescu shear test method, Experimental Mechanics, vol.27, issue.2, pp.113-119, 1987. ,
Strength of adhesive joints with adherend yielding: I. Analytical model, The Journal of Adhesion, vol.79, issue.1, pp.23-48, 2003. ,
DOI : 10.1115/1.3226047
Corrections for mode II fracture toughness specimens of composites materials, Composites Science and Technology, vol.43, issue.3, pp.251-256, 1992. ,
DOI : 10.1016/0266-3538(92)90096-L
Stress expressions of single-lap adhesive joints of dissimilar adherends, Composite Structures, vol.38, issue.1-4, pp.273-280, 1997. ,
DOI : 10.1016/S0263-8223(97)00062-7
A method for uniform shear stress-strain analysis of adhesives, Journal of Testing and Evaluation, vol.18, issue.3, pp.203-209, 1990. ,
Stiffness prediction of the double lap shear joint. Part1: Analytical solution, International Journal of Adhesion and Adhesives, vol.24, issue.3, pp.229-237, 2004. ,
DOI : 10.1016/j.ijadhadh.2003.10.003
Viscoelastic analysis of adhesively bonded joints, Computers & Structures, vol.27, issue.4, pp.445-454, 1987. ,
DOI : 10.1016/0045-7949(87)90275-6
Elastic???plastic mode-II fracture of adhesive joints, International Journal of Solids and Structures, vol.38, issue.18, pp.3251-3262, 2001. ,
DOI : 10.1016/S0020-7683(00)00221-3
Closed-form solutions for elastic stress???strain analysis in unbalanced adhesive single-lap joints considering adherend deformations and bond thickness, International Journal of Adhesion and Adhesives, vol.31, issue.6, pp.434-445, 2011. ,
DOI : 10.1016/j.ijadhadh.2011.03.002
Polymers and adhesives for the infrastructure, 2006. ,
Methods of analysis and failure predictions for adhesively bonded joints of uniform and variable bondline thickness, 2005. ,
An analytical solution for the analysis of symmetric composite adhesively bonded joints, Composite Structures, vol.65, issue.3-4, pp.499-510, 2004. ,
DOI : 10.1016/j.compstruct.2004.01.007
B (Durcisseur): Gris foncé Comp. A + B mélangés: Gris clair Annexes Construction Sikadur® ,