, Plan de définition de l'éprouvette de traction monotone Références bibliographiques
, Bibliographie
Tolérance aux défauts initiaux : Application à une fonte G.S. en fatigue, Thèse de doctorat, 1996. ,
Influence de gammes de tournage sur l'état de surface et la fatigue en endurance limitée d'un acier de construction, 1998. ,
Investigations on microstructural changes in machining of Inconel 100 alloy using face turning experiments and 3D finite element simulations, International Journal of Mechanical Sciences, vol.107, pp.80-92, 2016. ,
DOI : 10.1016/j.ijmecsci.2016.01.009
Estimating the fatigue stress concentration factor of machined surfaces, International Journal of Fatigue, vol.24, issue.9, pp.923-930, 2002. ,
DOI : 10.1016/S0142-1123(02)00012-9
Fatigue life prediction of an aluminium alloy automotive component using finite element analysis of surface topography, 2006. ,
Development of a numerical model for the understanding of the chip formation in high-pressure water-jet assisted machining. Finite Elements in Analysis and Design, pp.1-8, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01224932
Standard machining practices for metallic parts, Rev. B, pp.188-189, 2010. ,
thèse de doctorat: Influence des contraintes résiduelles induites par usinage sur la tenue en fatigue des matériaux métalliques aéronautiques, 1991. ,
Microstructural characterization of Al-7075-T651 chips and work pieces produced by high-speed machining, Materials Science and Engineering: A, vol.430, issue.1-2, pp.430-445, 2006. ,
DOI : 10.1016/j.msea.2006.04.122
Comparaison OAS ? OAST en termes de faïençage, corrosion, fatigue. s.l.: Les rendez-vous technologiques « Les traitements de surface des alliages légers, 2013. ,
Tolérance aux défauts initiaux et effets de surface : Dimensionnement à la fatigue de pièces de fonderie, Thèse de doctorat, 2000. ,
Fatigue Life Model for 7050 Chromic Anodized Aluminium Alloy, Procedia Engineering, vol.66, pp.300-312, 2013. ,
DOI : 10.1016/j.proeng.2013.12.085
URL : https://doi.org/10.1016/j.proeng.2013.12.085
Introduction to Fatigue Analysis in Mechanical Design by the Multiscale Approach, Volume CISM Courses and Lectures, issue.392, pp.57-88, 1999. ,
DOI : 10.1007/978-3-7091-2474-1_2
URL : https://hal.archives-ouvertes.fr/hal-00112495
Influence croisée de la rugosité et de l'anodisation chromique sur la tenue en fatigue de l'alliage 7010, pp.ISAE-ENSICA, 2007. ,
, Références bibliographiques
Estimation of the fatigue strength distribution in high-cycle multiaxial fatigue taking into account the stress???strain gradient effect, International Journal of Fatigue, vol.28, issue.5-6, pp.474-484, 2006. ,
DOI : 10.1016/j.ijfatigue.2005.06.048
URL : https://hal.archives-ouvertes.fr/hal-01368381
A Method for Obtaining and Analyzing Sensitivity Data, Journal of the American Statistical Association, vol.43, issue.241, 1948. ,
DOI : 10.2307/2983616
, , pp.109-126
Mechanical behaviour of materials. 4e éd, 2013. ,
Surface characterization of 7075-T73 aluminium exposed to anodizing pre-treatment solutions, Journal of Materials Engineering and Performance, vol.17, pp.674-681, 2008. ,
Corrosion of Type 7075-T73 Aluminum in, 2009. ,
, Deoxidizer Solution. Journal of Materials Engineering and Performance, vol.18, pp.196-204
Prediction of non propagating cracks, Engineering Fracture Mechanics, vol.11, issue.3, pp.573-584, 1979. ,
DOI : 10.1016/0013-7944(79)90081-X
Probabilistic approach in high-cycle multiaxial fatigue: volume and surface effects. Fatigue and Fracture of Engineering Materials and Structures, pp.1123-1135, 2004. ,
, Fracture, pp.591-619, 1968.
Modélisation des effets de défauts et d'intégrité de surface sur la tenue en fatigue dans les composants forgés, Angers: ENSAM, 2016. ,
Manufacturing Surface Technology : Surface integrity and Functional Performance, 2001. ,
Critical mechanisms in the development of fatigue cracks in 2024-T4 aluminium, pp.620-629, 1969. ,
Micromechanical study of the loading path effect in high cycle fatigue, International Journal of Fatigue, vol.59, pp.64-75, 2014. ,
DOI : 10.1016/j.ijfatigue.2013.09.014
URL : https://hal.archives-ouvertes.fr/hal-01084146
Prise en compte de l'intégrité de surface pour la prévision de la tenue en fatigue de pièces usinées en fraisage, 2010. ,
Fatigue initiation in heterogeneous brittle materials, Mechanics Research Communications, vol.18, issue.6, pp.409-414, 1991. ,
DOI : 10.1016/0093-6413(91)90054-Z
Stresses in a plate due to the presence of cracks and sharp corners. Engineering, p.415, 1913. ,
Impact of various ball cutter tool positions on the surface integrity of low carbon steel, Materials & Design, vol.30, issue.9, pp.3360-3366, 2009. ,
DOI : 10.1016/j.matdes.2009.03.039
, Références bibliographiques
Applicability of fracture mechanics to very small cracks, Proceedings of the second International Conference on Mechanical Behaviour of Materials, pp.627-631, 1976. ,
Characterisation of areal surface texture, 2013. ,
DOI : 10.1007/978-3-642-36458-7
S-N Fatigue Behavior of Anodized 7050-T7451 Produced in Different Electrolytes, Metallurgical and Materials Transactions A, vol.29, issue.6, pp.2002-2011, 2012. ,
DOI : 10.1016/j.matdes.2007.01.021
, , 1998.
Simulation study on function mechanism of some precipitates in localized corrosion of Al alloys, Corrosion Science, vol.49, issue.6, pp.2436-2449, 2007. ,
DOI : 10.1016/j.corsci.2006.12.002
Etude de l'effet de l'usinage grande vitesse sur la tenue en fatigue de pièces aéronautiques, 2008. ,
The mechanical state of the sublayer of a surface generated by chip removal process, Part2: Cutting with a tool with a flank wear. Transaction of ASME, J. Engng. Ind, vol.4, pp.1202-1208, 1976. ,
Fatigue des alliages ferreux -Facteurs d'influence, Ref BM5043, 2003. ,
Le dimensionnement des pièces de machines. Contribution expérimentale à l'étude de l'effet de l'échelle et des entailles, 1955. ,
A rapid method for generation of a Haigh diagram for high cycle fatigue. Fatigue and fracture mechanics, pp.626-641, 1999. ,
Second progress report on the effect of the specimen on fatigue strength of three types of steels, Proceedings, vol.43, pp.109-120, 1943. ,
Influence de l'usinage sur la durée de vie en fatigue de pièces aéronautiques en alliage de titane, 2013. ,
,
Metal Fatigue: Effects of small defects and non-metallic inclusions. s.l, 2002. ,
Theory of notch stresses. s.l, 1961. ,
Amorçage et propagation des fissures de fatigue dans les alliages d'aluminium 2050-T8 et 7050-T7451, 2015. ,
The effect of machined topography and integrity on fatigue life, International Journal of Machine Tools and Manufacture, vol.44, issue.2-3, pp.125-134, 2004. ,
DOI : 10.1016/j.ijmachtools.2003.10.018
Gradient-dependent multiaxial high-cycle fatigue criterion, 1996. ,
, , pp.349-364
, Références bibliographiques
The effect of quenching and defects size on the HCF behaviour of Boron steel, International Journal of Fatigue, vol.68, pp.80-89, 2014. ,
DOI : 10.1016/j.ijfatigue.2014.06.002
URL : https://hal.archives-ouvertes.fr/hal-01061163
A mechanistic approach to the Kitagawa???Takahashi diagram using a multiaxial probabilistic framework, Engineering Fracture Mechanics, vol.109, pp.89-104, 2013. ,
DOI : 10.1016/j.engfracmech.2013.06.001
URL : https://hal.archives-ouvertes.fr/hal-00875771
A new approach to model the fatigue anisotropy due to non-metallic inclusions in forged steels, International Journal of Fatigue, vol.41, pp.168-178, 2012. ,
DOI : 10.1016/j.ijfatigue.2012.01.005
URL : https://hal.archives-ouvertes.fr/hal-00790190
Stress Concentration Factors, Journal of Applied Mechanics, vol.42, issue.1, 1974. ,
DOI : 10.1115/1.3423544
On the effect of specimen length on the cyclic strength of steel, Zavodskaya Laboratorya, issue.12, pp.31-1497, 1965. ,
Analysis on high-speed face-milling of 7075-T6 aluminum using carbide and diamond cutters, International Journal of Machine Tools and Manufacture, vol.41, issue.12, pp.1763-1781, 2001. ,
DOI : 10.1016/S0890-6955(01)00033-5
Modeling of micro-and nano-scale cutting. Microfabrication and Precision Engineering, pp.1-25, 2017. ,
Fissuration par fatigue d'alliages d'aluminium au lithium de troisième génération, 2011. ,
A comparison between different numerical methods for the modeling of polycrystalline materials with an elastic???viscoplastic behavior, Computational Materials Science, vol.103, pp.134-144, 2015. ,
DOI : 10.1016/j.commatsci.2015.03.028
Physically-based modeling of the cyclic macroscopic behaviour of metals, Procedia Engineering, vol.2, issue.1, pp.531-540, 2010. ,
DOI : 10.1016/j.proeng.2010.03.057
Influence de la rugosité et des traitements l'anodisation sur la tenue en fatigue des alliages d'aluminium aéronautiques 2214 et 7050, 2011. ,
Influence of surface treatments on fatigue life of Al 7010 alloy, Journal of Materials Processing Technology, vol.210, issue.13, pp.1821-1826, 2010. ,
DOI : 10.1016/j.jmatprotec.2010.06.019
URL : https://hal.archives-ouvertes.fr/hal-01688729
Rôle de l'intégrité de surface dans la tenue en fatigue d'un acier bainitique après fraisage de finition, 2014. ,
Traitements thermiques des alliages d'aluminium -matériels et recommandations, 2011. ,
Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy, International Journal of Fatigue, vol.30, issue.12, pp.2119-2126, 2008. ,
DOI : 10.1016/j.ijfatigue.2008.06.003
Fatigue of materials, 1998. ,
DOI : 10.1017/CBO9780511806575
, Références bibliographiques
The influence of tool flank wear on residual stresses induced by milling aluminum alloy, Journal of Materials Processing Technology, vol.209, issue.9, pp.4502-4508, 2009. ,
DOI : 10.1016/j.jmatprotec.2008.10.034
Geometrical effects in fatigue: a unifying theoretical model, International Journal of Fatigue, vol.21, issue.5, pp.413-420, 1999. ,
DOI : 10.1016/S0142-1123(99)00007-9
The theory of critical distances, Engineering Fracture Mechanics, vol.75, issue.7, pp.1696-1705, 2008. ,
DOI : 10.1016/j.engfracmech.2007.04.007
A multiaxial fatigue failure criterion considering the effects of the defects, International Journal of Fatigue, vol.29, issue.9-11, pp.1996-2004, 2007. ,
DOI : 10.1016/j.ijfatigue.2007.01.017
3D modeling of residual stresses induced in finish turning of an AISI304L stainless steel, International Journal of Machine Tools and Manufacture, vol.53, issue.1, pp.77-90, 2012. ,
DOI : 10.1016/j.ijmachtools.2011.09.011
Fatigue from defect under multiaxial loading: Defect Stress Gradient (DSG) approach using ellipsoidal Equivalent Inclusion Method, International Journal of Fatigue, vol.59, pp.176-187, 2014. ,
DOI : 10.1016/j.ijfatigue.2013.08.027
A statistical theory of the strength of materials, Report Sweden: Roy. Swed. Inst. Eng. Res, vol.151, 1939. ,
A statistical distribution function of wide applicability, ASME J Appl Mech, vol.18, pp.293-297, 1951. ,