A. Buljac, T. Morgeneyer, L. Helfen, and F. Hild, On deformation and damage micromechanisms in strong work hardening 2198 T3 aluminium alloy, Acta Materialia, vol.149, 2017.
DOI : 10.1016/j.actamat.2018.01.026

URL : https://hal.archives-ouvertes.fr/hal-01710066

A. Buljac, T. Taillandier-thomas, T. F. Morgeneyer, L. Helfen, S. Roux et al., Slant strained band development during flat to slant crack transition in AA 2198 T8 sheet: in situ 3D measurements, International Journal of Fracture, vol.20, issue.1, pp.49-62, 2016.
DOI : 10.1364/OE.20.000794

URL : https://hal.archives-ouvertes.fr/hal-01385406

T. Böhlke, G. Bondár, Y. Estrin, and M. Lebyodkin, Geometrically non-linear modeling of the Portevin???Le Chatelier effect, Computational Materials Science, vol.44, issue.4, pp.1076-1088, 2009.
DOI : 10.1016/j.commatsci.2008.07.036

Y. Cai, C. Tian, G. Zhang, G. Han, S. Yang et al., Influence of ????? precipitates on the critical strain and localized deformation of serrated flow in Ni-based superalloys, Journal of Alloys and Compounds, vol.690, pp.707-715, 2017.
DOI : 10.1016/j.jallcom.2016.08.194

Y. Cai, S. Yang, Y. Wang, S. Fu, and Q. Zhang, Characterization of the deformation behaviors associated with the serrated flow of a 5456 Al-based alloy using two orthogonal digital image correlation systems, Materials Science and Engineering: A, vol.664, issue.123, pp.155-164, 2016.
DOI : 10.1016/j.msea.2016.04.003

Y. Cai, Q. Zhang, S. Yang, S. Fu, W. et al., Experimental Study on Three-Dimensional Deformation Field of Portevin???Le Chatelier Effect Using Digital Image Correlation, Experimental Mechanics, vol.193, issue.7, pp.1243-1255, 2016.
DOI : 10.1098/rspa.1948.0045

A. Deschamps, B. Decreus, F. De-geuser, T. Dorin, W. et al., The influence of precipitation on plastic deformation of Al???Cu???Li alloys, Acta Materialia, vol.61, issue.11, pp.614010-4021, 2013.
DOI : 10.1016/j.actamat.2013.03.015

URL : https://hal.archives-ouvertes.fr/hal-00850208

H. Dierke, F. Krawehl, S. Graff, S. Forest, J. ?achl et al., Portevin???LeChatelier effect in Al???Mg alloys: Influence of obstacles ??? experiments and modelling, Computational Materials Science, vol.39, issue.1, pp.106-112, 2007.
DOI : 10.1016/j.commatsci.2006.03.019

URL : https://hal.archives-ouvertes.fr/hal-00148582

Z. Drozd, Z. Trojanová, and S. Kúdela, Deformation behaviour of Mg???Li???Al alloys, Journal of Alloys and Compounds, vol.378, issue.1-2, pp.192-195, 2004.
DOI : 10.1016/j.jallcom.2004.01.040

T. Dursun and C. Soutis, Recent developments in advanced aircraft aluminium alloys, Materials & Design (1980-2015), vol.56, pp.862-871, 2014.
DOI : 10.1016/j.matdes.2013.12.002

H. Dybiec and M. Chaturvedi, Serrated yielding in inconel 718, Archives of Metallurgy, vol.36, issue.3, pp.341-352, 1991.

S. El-naaman and K. Nielsen, Observations on Mode I ductile tearing in sheet metals, European Journal of Mechanics - A/Solids, vol.42, pp.54-62, 2013.
DOI : 10.1016/j.euromechsol.2013.04.007

URL : http://orbit.dtu.dk/en/publications/observations-on-mode-i-ductile-tearing-in-sheet-metals(bc718d5d-6cd6-4579-86bd-57b9d8b8f949).html

S. A. El-naaman and K. L. Nielsen, Observations on Mode I ductile tearing in sheet metals, European Journal of Mechanics - A/Solids, vol.42, pp.54-62, 2013.
DOI : 10.1016/j.euromechsol.2013.04.007

URL : http://orbit.dtu.dk/en/publications/observations-on-mode-i-ductile-tearing-in-sheet-metals(bc718d5d-6cd6-4579-86bd-57b9d8b8f949).html

Y. Estrin and L. Kubin, Collective Dislocation Behaviour in Dilute Alloys and the Portevin???Le Chatelier Effect, Journal of the Mechanical Behavior of Materials, vol.50, issue.3-4, pp.255-292, 1989.
DOI : 10.1103/PhysRevLett.50.383

Y. Estrin and P. Mccormick, Modelling the transient flow behaviour of dynamic strain ageing materials, Acta Metallurgica et Materialia, vol.39, issue.12, pp.2977-2983, 1991.
DOI : 10.1016/0956-7151(91)90030-5

S. Feld-payet, J. Besson, and F. Feyel, Finite Element Analysis of Damage in Ductile Structures Using a Nonlocal Model Combined with a Three-field Formulation, International Journal of Damage Mechanics, vol.3, issue.1, pp.655-680, 2011.
DOI : 10.1016/0045-7949(84)90231-1

URL : https://hal.archives-ouvertes.fr/hal-00619641

C. L. Felter and K. L. Nielsen, Assisted crack tip flipping under Mode I thin sheet tearing, European Journal of Mechanics - A/Solids, vol.64, issue.50, pp.58-68, 2017.
DOI : 10.1016/j.euromechsol.2017.01.009

URL : http://orbit.dtu.dk/en/publications/assisted-crack-tip-flipping-under-mode-i-thin-sheet-tearing(2a98df92-b2ca-4778-907e-0f279eed6619).html

S. Forest and E. Lorentz, Localization phenomena and regularization methods. Local Approach to Fracture, pp.311-371, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00164479

L. Fournier, D. Delafosse, and T. Magnin, Oxidation induced intergranular cracking and Portevin???Le Chatelier effect in nickel base superalloy 718, Materials Science and Engineering: A, vol.316, issue.1-2, pp.166-173, 2001.
DOI : 10.1016/S0921-5093(01)01224-2

C. Fressengeas, A. Beaudoin, M. Lebyodkin, L. Kubin, and Y. Estrin, Dynamic strain aging: A coupled dislocation???Solute dynamic model, Materials Science and Engineering: A, vol.400, issue.401, pp.226-230, 2005.
DOI : 10.1016/j.msea.2005.02.073

URL : https://hal.archives-ouvertes.fr/hal-00011182

S. Graff, S. Forest, J. Strudel, C. Prioul, P. Pilvin et al., Strain localization phenomena associated with static and dynamic strain ageing in notched specimens: experiments and finite element simulations, Materials Science and Engineering: A, vol.387, issue.389, pp.181-185, 2004.
DOI : 10.1016/j.msea.2004.02.083

URL : https://hal.archives-ouvertes.fr/hal-00018967

S. Graff, S. Forest, J. Strudel, C. Prioul, P. Pilvin et al., Finite element simulations of dynamic strain ageing effects at V-notches and crack tips, Scripta Materialia, vol.52, issue.11, pp.521181-1186, 2005.
DOI : 10.1016/j.scriptamat.2005.02.007

URL : https://hal.archives-ouvertes.fr/hal-00014205

P. Gregson, D. Mcdarmaid, and E. Hunt, Post-yield deformation characteristics in Al???Li alloys, Materials Science and Technology, vol.4, issue.8, pp.713-718, 1988.
DOI : 10.1016/0036-9748(87)90278-X

G. Gruben, O. Hopperstad, and T. Børvik, Simulation of ductile crack propagation in dual-phase steel, International Journal of Fracture, vol.75, issue.1, pp.1-22, 2013.
DOI : 10.1016/j.engfracmech.2007.08.012

URL : https://brage.bibsys.no/xmlui/bitstream/11250/2459320/1/IJF_180_2013_1-22.pdf

C. Gupta, J. Chakravartty, S. Wadekar, and S. Banerjee, Fracture behaviour in the dynamic strain ageing regime of a martensitic steel, Scripta Materialia, vol.55, issue.12, pp.1091-1094, 2006.
DOI : 10.1016/j.scriptamat.2006.08.045

S. Gupta, A. J. Beaudoin, C. , and J. , Strain rate jump induced negative strain rate sensitivity (NSRS) in aluminum alloy 2024: Experiments and constitutive modeling, Materials Science and Engineering: A, vol.683, issue.105, pp.143-152, 2017.
DOI : 10.1016/j.msea.2016.12.010

P. Hähner, Modelling the spatiotemporal aspects of the Portevin-Le Ch??telier effect, Materials Science and Engineering: A, vol.164, issue.1-2, pp.23-34, 1993.
DOI : 10.1016/0921-5093(93)90640-Z

H. Halim, D. S. Wilkinson, and M. Niewczas, The Portevin???Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy, Acta Materialia, vol.55, issue.12, pp.4151-4160, 2007.
DOI : 10.1016/j.actamat.2007.03.007

H. Jiang, Q. Zhang, X. Wu, F. , and J. , Spatiotemporal aspects of the Portevin???Le Chatelier effect in annealed and solution-treated aluminum alloys, Scripta Materialia, vol.54, issue.12, pp.2041-2045, 2006.
DOI : 10.1016/j.scriptamat.2006.03.027

Z. Y. Jiang, Q. C. Zhang, H. F. Jiang, Z. J. Chen, and X. P. Wu, Spatial characteristics of the Portevin-Le Chatelier deformation bands in Al-4at%Cu polycrystals, Materials Science and Engineering: A, vol.403, issue.1-2, pp.154-164, 2005.
DOI : 10.1016/j.msea.2005.05.059

H. H. Jo and K. Hirano, Precipitation Processes in Al-Cu-Li Alloy Studied by DSC, Materials Science Forum, vol.13, issue.14, pp.377-382, 1987.
DOI : 10.4028/www.scientific.net/MSF.13-14.377


J. Kang, D. Wilkinson, M. Jain, J. Embury, A. Beaudoin et al., On the sequence of inhomogeneous deformation processes occurring during tensile deformation of strip cast AA5754, Acta Materialia, vol.54, issue.1, pp.209-218, 2006.
DOI : 10.1016/j.actamat.2005.08.045

A. Karimi, Etude sur machine molle de la déformation plastique hétérogène: cas d'un acier austenitique, 1981.

J. Kim and J. W. Yoon, Necking behavior of AA 6022-T4 based on the crystal plasticity and damage models, International Journal of Plasticity, vol.73, pp.3-23, 2015.
DOI : 10.1016/j.ijplas.2015.06.013

K. Kim, J. Kim, J. Suk, U. Sung, and H. Kwon, Influences of the dynamic strain aging on the J???R fracture characteristics of the ferritic steels for reactor coolant piping system, Nuclear Engineering and Design, vol.228, issue.1-3, pp.151-159, 2004.
DOI : 10.1016/j.nucengdes.2003.06.014

B. Klusemann, G. Fischer, T. Böhlke, and B. Svendsen, Thermomechanical characterization of Portevin???Le Ch??telier bands in AlMg3 (AA5754) and modeling based on a modified Estrin???McCormick approach, International Journal of Plasticity, vol.67, issue.123, pp.192-216, 2015.
DOI : 10.1016/j.ijplas.2014.10.011

U. Kocks, Laws for Work-Hardening and Low-Temperature Creep, Journal of Engineering Materials and Technology, vol.98, issue.1, pp.76-85, 1976.
DOI : 10.1115/1.3443340

S. Kok, A. Beaudoin, D. Tortorelli, and M. Lebyodkin, A finite element model for the Portevin??Le Chatelier effect based on polycrystal plasticity, Modelling and Simulation in Materials Science and Engineering, vol.10, issue.6, p.745, 2002.
DOI : 10.1088/0965-0393/10/6/309

S. Kok, M. Bharathi, A. Beaudoin, C. Fressengeas, G. Ananthakrishna et al., Spatial coupling in jerky flow using polycrystal plasticity, Acta Materialia, vol.51, issue.13, pp.513651-3662, 2003.
DOI : 10.1016/S1359-6454(03)00114-9

URL : https://hal.archives-ouvertes.fr/hal-00011191

E. Kröner, Zur plastischen verformung des vielkristalls, Acta Metallurgica, vol.9, issue.2, pp.155-161, 1961.
DOI : 10.1016/0001-6160(61)90060-8

L. Kubin and Y. Estrin, Thermal effects in low-temperature deformation: The response to strain rate changes, Crystal Research and Technology, vol.17, issue.6, pp.853-862, 1984.
DOI : 10.1002/crat.2170190619

L. Kubin and Y. Estrin, Evolution of dislocation densities and the critical conditions for the Portevin-Le Ch??telier effect, Acta Metallurgica et Materialia, vol.38, issue.5, pp.697-708, 1990.
DOI : 10.1016/0956-7151(90)90021-8

L. Kubin and Y. Estrin, Dynamic strain ageing and the mechanical response of alloys, Journal de Physique III, vol.1, issue.6, pp.929-943, 1991.
DOI : 10.1051/jp3:1991166

URL : https://hal.archives-ouvertes.fr/jpa-00248641

L. Kubin, A. Styczynski, and Y. Estrin, Discontinuous yielding in an Al???Li???Zr alloy, Scripta Metallurgica et Materialia, vol.26, issue.9, pp.1423-1428, 1992.
DOI : 10.1016/0956-716X(92)90660-7

L. P. Kubin, Strain and Strain Rate Softening Instabilities: Length Scales and Spatial Couplings, Key Engineering Materials, vol.97, issue.98, pp.219-234, 1994.
DOI : 10.4028/www.scientific.net/KEM.97-98.219


L. P. Kubin, K. Chihab, and Y. Estrin, The rate dependence of the portevin-Le chatelier effect, Acta Metallurgica, vol.36, issue.10, pp.2707-2718, 1988.
DOI : 10.1016/0001-6160(88)90117-4

L. P. Kubin and Y. Estrin, The portevin-Le Chatelier effect in deformation with constant stress rate, Acta Metallurgica, vol.33, issue.3, pp.397-407, 1985.
DOI : 10.1016/0001-6160(85)90082-3

A. M. Kumar and J. P. Hirth, Mixed mode I/III fracture testing, Scripta Metallurgica et Materialia, vol.25, issue.5, pp.985-990, 1991.
DOI : 10.1016/0956-716X(91)90489-N

S. Kumar, J. Król, and E. Pink, Mechanism of serrated flow in binary Al-Li alloys, Scripta Materialia, vol.35, issue.6, pp.775-780, 1996.
DOI : 10.1016/1359-6462(96)00218-7

S. Kumar and E. Pink, Effect of ?'precipitates on serrated flow, Scripta Metallurgica et Materialia, pp.749-753, 1995.
DOI : 10.1016/0956-716x(95)91597-i

M. Kuroda and V. Tvergaard, Effects of texture on shear band formation in plane strain tension/compression and bending, International Journal of Plasticity, vol.23, issue.2, pp.244-272, 2007.
DOI : 10.1016/j.ijplas.2006.03.014

URL : http://orbit.dtu.dk/en/publications/effects-of-texture-on-shear-band-formation-in-plane-strain-tensioncompression-and-bending(8e211a5d-f98e-460b-94f6-645469f0237f).html

P. Lacombe, L???effet portevin-le chatelier ses caract??ristiques et ses cons??quences sur les h??t??rog??n??it??s de d??formation plastique, Mat??riaux & Techniques, vol.73, issue.8-9, pp.5-15, 1985.
DOI : 10.1051/mattech/198573080005

W. Lan, X. Deng, M. A. Sutton, and C. Cheng, Study of slant fracture in ductile materials, International Journal of Fracture, vol.63, issue.3-4, pp.3-4469, 2006.
DOI : 10.1115/1.3601204

L. Cam, J. Robin, E. Leotoing, L. Guines, and D. , Calorimetric analysis of Portevin-Le Chatelier bands under equibiaxial loading conditions in Al???Mg alloys: Kinematics and mechanical dissipation, Mechanics of Materials, vol.105, pp.80-88, 2017.
DOI : 10.1016/j.mechmat.2016.11.012

URL : https://hal.archives-ouvertes.fr/hal-01484632

L. Chatelier and A. , Influence du temps et de la temp??rature sur les essais au choc, Revue de M??tallurgie, vol.6, issue.8, pp.914-917, 1909.
DOI : 10.1051/metal/190906080914

L. Jolu, T. Morgeneyer, T. F. Denquin, A. Gourgues-lorenzon, and A. , Fatigue lifetime and tearing resistance of AA2198 Al???Cu???Li alloy friction stir welds: Effect of defects, International Journal of Fatigue, vol.70, pp.463-472, 2015.
DOI : 10.1016/j.ijfatigue.2014.07.001

L. Jolu, T. Morgeneyer, T. F. Denquin, A. Sennour, M. Laurent et al., Microstructural Characterization of Internal Welding Defects and Their Effect on the Tensile Behavior of FSW Joints of AA2198 Al-Cu-Li Alloy, Metallurgical and Materials Transactions A, vol.142, issue.436, pp.455531-5544, 2014.
DOI : 10.1016/S0045-7825(96)01124-3

URL : https://hal.archives-ouvertes.fr/hal-01095768

A. Leacock, R. Mcmurray, D. Brown, K. Poston, E. Cueto et al., The influence of strain rate variations on the appearance of serrated yielding in 2024-T3 Alclad aluminium alloy, AIP Conference Proceedings, pp.390-395, 2007.

M. Lebyodkin, L. Dunin-barkowskii, Y. Brechet, Y. Estrin, and L. Kubin, Spatio-temporal dynamics of the Portevin???Le Chatelier effect: experiment and modelling, Acta Materialia, vol.48, issue.10, pp.2529-2541, 2000.
DOI : 10.1016/S1359-6454(00)00067-7

A. Lipski and S. Mrozí-nski, The effects of temperature on the strength properties of aluminium alloy 2024-T3, Acta Mechanica et Automatica, vol.6, issue.3, pp.62-66, 2012.

N. Louat, On the theory of the portevin-le chatelier effect, Scripta Metallurgica, vol.15, issue.11, pp.1167-1170, 1981.
DOI : 10.1016/0036-9748(81)90290-8

H. Louche, P. Vacher, and R. Arrieux, Thermal observations associated with the Portevin???Le Ch??telier effect in an Al???Mg alloy, Materials Science and Engineering: A, vol.404, issue.1-2, pp.188-196, 2005.
DOI : 10.1016/j.msea.2005.05.058

W. Lüders, Über die äusserung der elasticität an stahlartigen eisenstäben und stahlstäben, und über aine beim biegen solcher stäbe beobachtete molecularbewegung . Dingler's Polytechnisches Journal, pp.18-22, 1860.

M. Luo and G. Rousselier, Modeling of large strain multi-axial deformation of anisotropic metal sheets with strength-differential effect using a Reduced Texture Methodology, International Journal of Plasticity, vol.53, issue.183, pp.66-89, 2014.
DOI : 10.1016/j.ijplas.2013.07.006

URL : https://hal.archives-ouvertes.fr/hal-00942623

J. Lyons, J. Liu, and M. Sutton, High-temperature deformation measurements using digital-image correlation, Experimental Mechanics, vol.33, issue.2, pp.64-70, 1996.
DOI : 10.1117/12.7976778

E. Mahgoub, X. Deng, and M. A. Sutton, Three-dimensional stress and deformation fields around flat and slant cracks under remote Mode I loading conditions, Engineering Fracture Mechanics, vol.70, issue.18, pp.2527-2542, 2003.
DOI : 10.1016/S0013-7944(03)00082-1

S. Mahmoud and K. Lease, The effect of specimen thickness on the experimental characterization of critical crack-tip-opening angle in 2024-T351 aluminum alloy, Engineering Fracture Mechanics, vol.70, issue.3-4, pp.443-456, 2003.
DOI : 10.1016/S0013-7944(02)00130-3

E. Maire and P. J. Withers, Quantitative X-ray tomography, International Materials Reviews, vol.42, issue.3, pp.1-43, 2014.
DOI : 10.1016/j.jnucmat.2011.03.051

URL : https://hal.archives-ouvertes.fr/hal-01538208


E. Maire, S. Zhou, J. Adrien, and M. Dimichiel, Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography, Engineering Fracture Mechanics, vol.78, issue.15, pp.2679-2690, 2011.
DOI : 10.1016/j.engfracmech.2011.07.004

URL : https://hal.archives-ouvertes.fr/hal-01538237

V. Manual, Vic-3d manual. correlated solutions, Inc, vol.129, p.81, 2010.

A. Marais, Influence du vieillissement statique sur la transition ductile-fragile des aciers au C-Mn, p.25, 2012.
URL : https://hal.archives-ouvertes.fr/pastel-00820563

A. Marais, M. Mazière, S. Forest, A. Parrot, L. Delliou et al., Identification of a strain-aging model accounting for lüders behavior in a C-Mn steel, Philosophical Magazine, vol.92, issue.140, pp.28-303589, 2012.

A. Marchenko, M. Mazière, S. Forest, and J. Strudel, Crystal plasticity simulation of strain aging phenomena in ??-titanium at room temperature, International Journal of Plasticity, vol.85, pp.1-33, 2016.
DOI : 10.1016/j.ijplas.2016.05.007

URL : https://hal.archives-ouvertes.fr/hal-01358092

B. Max, B. Viguier, E. Andrieu, C. , and J. , A Re-examination of the Portevin-Le Chatelier Effect in Alloy 718 in Connection with Oxidation-Assisted Intergranular Cracking, Metallurgical and Materials Transsactions, pp.5431-5441, 2014.
DOI : 10.1016/0956-7151(94)00334-E

URL : https://hal.archives-ouvertes.fr/hal-01178616

M. Mazière, Overspeed burst of turboengine disks, 2007.

M. Mazière, Modelling the Portevin-Le Chatelier effect in metallic alloys, 2017.

M. Mazière, J. Besson, S. Forest, B. Tanguy, H. Chalons et al., Numerical aspects in the finite element simulation of the Portevin???Le Chatelier effect, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.9-12, pp.734-754, 2010.
DOI : 10.1016/j.cma.2009.11.004

M. Mazière and H. Dierke, Investigations on the Portevin Le Chatelier critical strain in an aluminum alloy, Computational Materials Science, vol.52, issue.1, pp.68-72, 2012.
DOI : 10.1016/j.commatsci.2011.05.039

K. Prasad and V. K. Varma, Serrated flow behavior in a near alpha titanium alloy IMI 834, Materials Science and Engineering: A, vol.486, issue.1-2, pp.158-166, 2008.
DOI : 10.1016/j.msea.2007.09.020

N. E. Prasad, A. Gokhale, and R. Wanhill, Aluminum-lithium alloys: processing, properties, and applications, Butterworth-Heinemann, 2013.

N. Ranc, W. Du, I. Ranc, and D. Wagner, Experimental studies of Portevin-Le Chatelier plastic instabilities in carbon-manganese steels by infrared pyrometry, Materials Science and Engineering: A, vol.663, pp.166-173, 2016.
DOI : 10.1016/j.msea.2016.03.096

URL : https://hal.archives-ouvertes.fr/hal-01377562

N. Ranc and D. Wagner, Some aspects of Portevin???Le Chatelier plastic instabilities investigated by infrared pyrometry, Materials Science and Engineering: A, vol.394, issue.1-2, pp.87-95, 2005.
DOI : 10.1016/j.msea.2004.11.042

URL : https://hal.archives-ouvertes.fr/hal-00283503

N. Ranc and D. Wagner, Experimental study by pyrometry of Portevin???Le Ch??telier plastic instabilities???Type A to type B transition, Materials Science and Engineering: A, vol.474, issue.1-2, pp.188-196, 2008.
DOI : 10.1016/j.msea.2007.04.012

URL : https://hal.archives-ouvertes.fr/hal-00283571/file/NRDWE.pdf

K. B. Rao, S. Kalluri, G. R. Halford, and M. A. Mcgaw, Serrated flow and deformation substructure at room temperature in Inconel 718 superalloy during strain controlled fatigue, Scripta Metallurgica et Materialia, vol.32, issue.4, pp.493-498, 1995.
DOI : 10.1016/0956-716X(95)90826-6

S. Ren, G. Rousselier, T. F. Morgeneyer, M. Mazière, and S. Forest, Numerical investigation of dynamic strain ageing and slant ductile fracture in a notched specimen and comparison with synchrotron tomography 3D-DVC, Procedia Structural Integrity, pp.3385-3392, 0195.
DOI : 10.1016/j.prostr.2016.06.422

URL : https://hal.archives-ouvertes.fr/hal-01357815

J. R. Rice and D. M. Tracey, On the ductile enlargement of voids in triaxial stress fields???, Journal of the Mechanics and Physics of Solids, vol.17, issue.3, pp.201-217, 1969.
DOI : 10.1016/0022-5096(69)90033-7

R. J. Rioja and J. Liu, The Evolution of Al-Li Base Products for Aerospace and Space Applications, Metallurgical and Materials Transactions A, vol.16, issue.3, pp.3325-3337, 2012.
DOI : 10.1016/S0142-1123(01)00159-1

F. Rivalin, A. Pineau, D. Fant, M. Besson, and J. , Ductile tearing of pipeline-steel wide plates, Engineering Fracture Mechanics, vol.68, issue.3, pp.329-345, 2001.
DOI : 10.1016/S0013-7944(00)00107-7

G. Rousselier, M. Luo, and D. Mohr, Macroscopic plasticity modeling of anisotropic aluminum extrusions using a Reduced Texture Methodology, International Journal of Plasticity, vol.30, issue.31, pp.144-165, 2012.
DOI : 10.1016/j.ijplas.2011.10.004

URL : https://hal.archives-ouvertes.fr/hal-00683949

G. Rousselier, T. F. Morgeneyer, S. Ren, M. Mazière, and S. Forest, Interaction of the Portevin???Le??Chatelier phenomenon with ductile fracture of a thin aluminum CT specimen: experiments and simulations, International Journal of Fracture, vol.49, issue.2, pp.95-122, 2017.
DOI : 10.1016/S1359-6454(00)00380-3

URL : https://hal.archives-ouvertes.fr/hal-01518980

G. Rousselier and S. Quilici, Combining porous plasticity with Coulomb and Portevin-Le Chatelier models for ductile fracture analyses, International Journal of Plasticity, vol.69, issue.179, pp.118-133, 0197.
DOI : 10.1016/j.ijplas.2015.02.008

URL : https://hal.archives-ouvertes.fr/hal-01149852

K. Sai, G. Cailletaud, and S. Forest, Micro-mechanical modeling of the inelastic behavior of directionally solidified materials, Mechanics of Materials, vol.38, issue.3, pp.203-217, 2006.
DOI : 10.1016/j.mechmat.2005.06.007

I. Scheider and W. Brocks, Simulation of cup???cone fracture using the cohesive model, Engineering Fracture Mechanics, vol.70, issue.14, pp.1943-1961, 2003.
DOI : 10.1016/S0013-7944(03)00133-4


B. C. Simonsen and R. Törnqvist, Experimental and numerical modelling of ductile crack propagation in large-scale shell structures, Marine Structures, vol.17, issue.1, pp.1-27, 2004.
DOI : 10.1016/j.marstruc.2004.03.004

A. Sleeswyk, Slow strain-hardening of ingot iron, Acta Metallurgica, vol.6, issue.9, pp.598-603, 1958.
DOI : 10.1016/0001-6160(58)90101-9

F. Springer and C. Schwink, Quantitative investigations on dynamic strain ageing in polycrystalline CuMn alloys, Scripta Metallurgica et Materialia, pp.2739-2744, 1991.
DOI : 10.1016/0956-716X(91)90149-U

J. Strudel, Interactions des dislocations avec des impuretés mobiles. Dislocation et Déformation Plastique, Ecole d'Eté Yravals, les Editions de Physique, pp.199-222, 1979.

K. Subramanian and A. Duncan, Tensile properties for application to type I and type II waste tank flaw stability analysis (u), 2000.
DOI : 10.2172/764654

C. H. Suh, Y. Jung, K. , and Y. S. , Effects of thickness and surface roughness on mechanical properties of aluminum sheets, Journal of Mechanical Science and Technology, vol.339, issue.4, pp.2091-2098, 2010.
DOI : 10.1016/j.msea.2006.11.113

M. Sutton, D. Dawicke, and J. Newman, Orientation Effects on the Measurement and Analysis of Critical CTOA in an Aluminum Alloy Sheet, Fracture Mechanics: 26th Volume. ASTM International, 1995.
DOI : 10.1520/STP16387S

M. Sutton, J. Turner, H. Bruck, C. , and T. , Full-field representation of discretely sampled surface deformation for displacement and strain analysis, Experimental Mechanics, vol.391, issue.3, pp.168-177, 1991.
DOI : 10.1007/BF02327571

M. A. Sutton, Digital Image Correlation for Shape and Deformation Measurements, Springer Handbook of Experimental Solid Mechanics, pp.565-600, 2008.
DOI : 10.1007/978-0-387-30877-7_20

M. A. Sutton, Computer Vision-Based, Noncontacting Deformation Measurements in Mechanics: A Generational Transformation, Applied Mechanics Reviews, vol.65, issue.5, p.50802, 2013.
DOI : 10.1115/1.4024984

B. Swaminathan, W. Abuzaid, H. Sehitoglu, L. , and J. , Investigation using digital image correlation of Portevin-Le Chatelier Effect in Hastelloy X under thermo-mechanical loading, International Journal of Plasticity, vol.64, pp.177-192, 2015.
DOI : 10.1016/j.ijplas.2014.09.001

T. Tabata, H. Fujtta, and Y. Nakajima, Behavior of dislocations in AL???MG single crystals observed by high voltage electron microscopy, Acta Metallurgica, vol.28, issue.6, pp.795-805, 1980.
DOI : 10.1016/0001-6160(80)90156-X

V. Taupin, J. Chevy, and C. Fressengeas, Effects of grain-to-grain interactions on shear strain localization in Al???Cu???Li rolled sheets, International Journal of Solids and Structures, vol.99, pp.71-81, 0193.
DOI : 10.1016/j.ijsolstr.2016.07.023

C. Teko?-glu, J. Hutchinson, and T. Pardoen, On localization and void coalescence as a precursor to ductile fracture, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.68, issue.2038, pp.20140121-20140159, 2015.
DOI : 10.1016/j.commatsci.2012.10.004

T. Warner, Recently-developed aluminium solutions for aerospace applications In Aluminium Alloys 2006 -ICAA10, Materials Science Forum, vol.519, issue.95, pp.1271-1278, 2006.
DOI : 10.4028/www.scientific.net/msf.519-521.1271

M. Wenman and P. Chard-tuckey, Modelling and experimental characterisation of the L??ders strain in complex loaded ferritic steel compact tension specimens, International Journal of Plasticity, vol.26, issue.7, pp.1013-1028, 2010.
DOI : 10.1016/j.ijplas.2009.12.005

A. Wijler and J. S. Van-westrum, On the difference between L??ders bands and portevin ??? Le chatelier bands, Scripta Metallurgica, vol.5, issue.10, pp.821-824, 1971.
DOI : 10.1016/0036-9748(71)90050-0

W. Wu, Y. Wang, J. Wang, W. , and S. , Effect of electrical pulse on the precipitates and material strength of 2024 aluminum alloy, Materials Science and Engineering: A, vol.608, pp.190-198, 2014.
DOI : 10.1016/j.msea.2014.04.071

Y. Xiao, P. Zeng, and L. Lei, Effect of double-edge semi-circular notches on the mechanical response of superelastic NiTi shape memory alloy: Experimental observations, The Journal of Strain Analysis for Engineering Design, vol.51, issue.8, pp.51555-562, 2016.
DOI : 10.1088/0964-1726/20/2/025014

S. Xiong, Q. Zhang, P. Cao, X. , and R. , Effect of precipitate on PLC effect, 2009.

S. Zhang, P. Mccormick, and Y. Estrin, The morphology of Portevin???Le Chatelier bands: finite element simulation for Al???Mg???Si, Acta Materialia, vol.49, issue.6, pp.1087-1094, 2001.
DOI : 10.1016/S1359-6454(00)00380-3

K. Zhao and R. Fan, The Effect of Pulse Electric Current on the Mechanical Properties and Fracture Behaviors of Aluminum Alloy AA5754, Journal of Engineering Materials and Technology, vol.138, issue.4, p.41009, 2016.
DOI : 10.1115/1.4033635