A. M. El-refaie, Fractional-slot concentrated-windings synchronous permanent magnet machines: Opportunities and challenges, IEEE Transactions on, vol.57, issue.1, p.23, 2010.

T. A. Burress, S. L. Campbell, C. Coomer, C. W. Ayers, A. A. Wereszczak et al., Evaluation of the 2010 toyota prius hybrid synergy drive system, ORNL

G. Dajaku, S. Spas, X. Dajaku, and D. Gerling, Comparison of two fscw pm machines for integrated traction motor/generator, 2015 IEEE International Electric Machines & Drives Conference (IEMDC), p.30, 2015.

S. Sadeghi, L. Guo, H. A. Toliyat, and L. Parsa, Wide operational speed range of five-phase permanent magnet machines by using different stator winding configurations, Industrial Electronics, vol.59, issue.6, p.107, 2012.

M. Osama and T. A. Lipo, A new inverter control scheme for induction motor drives requiring wide speed range, Industry Applications, IEEE Transactions on, vol.32, p.107, 1996.

G. Dajaku, F. Bachheibl, A. Patzak, and D. Gerling, Intelligent stator cage winding for automotive traction electric machines, vivi, vivi, vol.37, p.39

J. M. Miller, V. Stefanovic, V. Ostovic, and J. Kelly, Design considerations for an automotive integrated starter-generator with pole-phase modulation, Industry Applications Conference, 2001. Thirty-Sixth IAS Annual Meeting. Conference Record of the 2001 IEEE, vol.4, p.40, 2001.

F. Magnussen, P. Thelin, and C. Sadarangani, Performance evaluation of permanent magnet synchronous machines with concentrated and distributed windings including the effect of field-weakening, Second International Conference on (Conf. Publ. No. 498), vol.2, p.51, 2004.

A. P. Sandulescu, F. Meinguet, X. Kestelyn, E. Semail, and A. Bruyere, Flux-weakening operation of open-end winding drive integrating a cost-effective high-power charger, Electrical Systems in Transportation, vol.3, issue.1, p.52, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00790157

P. Sandulescu, F. Meinguet, X. Kestelyn, E. Semail, and A. Bruyere, Control strategies for open-end winding drives operating in the flux-weakening region, IEEE Transactions on, vol.29, issue.9, p.52, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00876143

H. Dogan, Méthodologie de conception des machines synchrones à aimants permanents. application au véhicule électrique avec chargeur rapide embarqué, vol.30, p.119, 2013.

, Caractéristiques b-h des toles m270-50a, p.147

B. Aslan, Conception de machines polyphasées à aimants et bobinage concentré à pas fractionnaire avec large plage de vitesse, Arts et Métiers ParisTech, 2013. xiiixiii, xiiixiii, xiiixiii, vol.81, p.124

B. Aslan, E. Semail, and J. Legranger, General analytical model of magnet average eddycurrent volume losses for comparison of multiphase pm machines with concentrated winding, IEEE Transactions on, vol.29, issue.1, p.91, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01009626

, Pétrole épuisé avant les renouvelables

A. , Consommation mondiale du pétrole, 2014.

S. Carballes, Les véhicules particuliers en france, 2001.

, Règlementation européenne sur les émissions de co2 des véhicules particuliers, 2009.

J. Noble, Les moteurs turbo hybrides pourront-ils dépasser les 1000 chevaux

A. Patzak, F. Bachheibl, A. Baumgardt, G. Dajaku, O. Moros et al., Iscad-electric high performance drive for individual mobility at extra-low voltages, SAE International Journal of Alternative Powertrains, vol.5, pp.148-156, 1179.

I. , Electrically propelled road vehicles-safety specifications

. Mazman, Enhanced lead acid batteries for 12v start and stop and 48 v micro hybrid applications, Conference on Advanced battery Power-Automotive and energy supply solutions, 2004.

, electric and electronic components in motor vehicles 48v on-board power supply,requirements and tests,recommandation 320, 2004.

M. Kuypers, Application of 48 volt for mild hybrid vehicles and high power loads, SAE Technical Paper, Tech. Rep, p.4, 2014.

A. Patzak and D. Gerling, Design of a multi-phase inverter for low voltage high power electric vehicles, Electric Vehicle Conference (IEVC), vol.4, p.37, 2014.

. Bibliographie,

J. Fletcher, Performance of three-and five-phase pm-based wind generators under rectifier diode failures, IECON 2011-37th Annual Conference on IEEE Industrial Electronics Society, pp.3640-3645, 2011.

F. Scuiller, J. Charpentier, E. Semail, and S. Clénet, Comparison of two 5-phase permanent magnet machine winding configurations. application on naval propulsion specifications, Conf. Rec. IEEE IEMDC, pp.34-39, 2007.
DOI : 10.1109/iemdc.2007.383548

E. Levi, Multiphase electric machines for variable-speed applications, IEEE Transactions on, vol.55, issue.5, pp.1893-1909, 2008.
DOI : 10.1109/tie.2008.918488

L. Parsa, On advantages of multi-phase machines, Industrial Electronics Society, 2005. IECON 2005. 31st Annual Conference of IEEE, pp.6-9, 2005.
DOI : 10.1109/iecon.2005.1569139

S. Mosavi, S. Sefid, S. Mirbagheri, and S. Sefid, Reduction of torque ripple and increase of torque capacity of bldc motor, PEDES 2011-2012 IEEE International Conference on Power Electronics, Drives and Energy Systems, pp.1-5

K. Wang, Z. Zhu, and G. Ombach, Torque enhancement of surface-mounted permanent magnet machine using third-order harmonic, Magnetics, IEEE Transactions on, vol.50, p.203, 2014.
DOI : 10.1109/tmag.2013.2286780

H. Zahr, F. Scuiller, and E. Semail, Maximum torque per ampere strategy for a five-phase biharmonic machine, Speedam Conference, vol.9, p.134, 2014.
DOI : 10.1109/speedam.2016.7525869
URL : https://hal.archives-ouvertes.fr/hal-01393505

H. Zahr, E. Semail, and F. Scuiller, Five-phase version of 12slots/8poles three-phase synchronous machine for marine-propulsion, Vehicle Power and Propulsion Conference (VPPC), vol.9, p.90, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01069907

B. Aslan and E. Semail, New 5-phase concentrated winding machine with bi-harmonic rotor for automotive application, Electrical Machines (ICEM), 2014 International Conference on, vol.9, p.124, 2014.
DOI : 10.1109/icelmach.2014.6960476

R. O. Lyra and T. A. Lipo, Torque density improvement in a six-phase induction motor with third harmonic current injection, Industry Applications, vol.38, pp.1351-1360, 2002.
DOI : 10.1109/ias.2001.955773
URL : https://minds.wisconsin.edu/bitstream/1793/9876/1/file_1.pdf

A. Abdelkhalik, M. Masoud, and W. Barry, Eleven-phase induction machine: steady-state analysis and performance evaluation with harmonic injection, Electric Power Applications, IET, vol.4, issue.8, p.9, 2010.
DOI : 10.1049/iet-epa.2009.0204

J. Wang, R. Qu, and L. Zhou, Dual-rotor multiphase permanent magnet machine with harmonic injection to enhance torque density, Applied Superconductivity, vol.22, issue.3, 2012.

F. Scuiller, Third harmonic current injection to reduce the pulsating torque of a five-phase spm machine, Industrial Electronics Society, IECON 2015-41st Annual Conference of the IEEE, vol.9, p.79, 2015.

J. Gong, A. Berbecea, F. Gillon, and P. Brochet, Optimal design of a double-sided linear induction motor using an efficient global optimization, International Symposium on Linear Drives for Industry Applications, LDIA2011, 2011.

E. Semail and ;. Lille, Entrainements électriques polyphasés: vers une approche système, 2009.

F. Locment, Concéption et modélisation d'une machine synchrone à 7phases à aimants permanents et flux axial: commande vectorielle en modes normal et dégradés, 2006.

L. Parsa, N. Kim, and H. A. Toliyat, Field weakening operation of high torque density fivephase permanent magnet motor drives, Electric Machines and Drives, pp.1507-1512, 2005.

X. M. Kestelyn, Modélisation vectorielle multimachines pour la commande des ensembles convertisseurs-machines polyphasés, vol.10, p.68, 2003.

F. Locment, E. Semail, and X. Kestelyn, Optimum use of dc bus by fitting the backelectromotive force of a 7-phase permanent magnet synchronous machine, Proc. European Power Electronics and Applications Conf. EPE. Dresden, 2005.

F. Scuiller, E. Semail, J. Charpentier, and P. Letellier, Multi-criteria-based design approach of multi-phase permanent magnet low-speed synchronous machines, IET, vol.3, issue.2, p.60, 2009.

F. Scuiller, Développement d'outils de conception de machines polyphasées à aimants utilisant l'approche multimachine, Ph.D. dissertation, Arts et Métiers ParisTech, vol.12, p.23, 2006.

F. Magnussen and C. Sadarangani, Windings factor and copper losses of permanent magnet machines with concentrated windings, Proc. IEEE-IEMDC, pp.333-339, 1922.

F. Magnussen and H. Lendenmann, Parasitic effects in pm machines with concentrated windings, Industry Applications, vol.43, p.22, 2007.

L. Chong, R. Dutta, and M. Rahman, A comparative study of rotor losses in an ipm with single and double layer concentrated windings, Electrical Machines and Systems (ICEMS), 2010.

D. Ishak, Z. Zhu, and D. Howe, Eddy-current loss in the rotor magnets of permanent-magnet brushless machines having a fractional number of slots per pole, IEEE Transactions on, vol.41, issue.9, p.94, 2005.

A. Cassat, C. Espanet, R. Coleman, L. Burdet, E. Leleu et al., A practical solution to mitigate vibrations in industrial pm motors having concentric windings, IEEE Transactions on Industry Applications, vol.48, issue.5, pp.1526-1538, 2012.

F. Scuiller, E. Semail, and J. Charpentier, General modeling of the windings for multi-phase ac machines, The European Physical Journal Applied Physics, vol.50, issue.03, p.59, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00593671

. Bibliographie,

H. Dogan, F. Wurtz, A. Foggia, and L. Garbuio, Performance analysis of windings configuration on fractional-slots pmsm performance, Power Electronics and Applications (EPE), 2013 15th European Conference on, vol.30, pp.1-7, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00875109

A. Masmoudi and Z. Zhu, Fractional slot permanent magnet brushless machines and drives for electric and hybrid propulsion systems, vol.30, p.30, 2011.

N. K. Nguyen, E. Semail, F. Meinguet, P. Sandulescu, X. Kestelyn et al., Different virtual stator winding configurations of open-end winding five-phase pm machines for wide speed range without flux weakening operation, p.33, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00822027

A. Gautam and J. O. Ojo, Variable speed multiphase induction machine using pole phase modulation principle, IECON 2012-38th Annual Conference on IEEE Industrial Electronics Society, vol.34, p.107, 2012.

G. Dajaku and D. Gerling, Low costs and high efficiency asynchronous machine with stator cage winding, Electric Vehicle Conference (IEVC), vol.37, pp.1-6, 2014.

F. Scuiller, H. Zahr, and E. Semail, Maximum reachable torque, power and speed for fivephase spm machine with low armature reaction, IEEE Transactions on Energy Conversion, vol.31, p.61
URL : https://hal.archives-ouvertes.fr/hal-01294969

F. Scuiller and E. Semail, Inductances and back-emf harmonics influence on the torque/speed characteristic of five-phase spm machine, Vehicle Power and Propulsion Conference (VPPC), vol.45, pp.1-6, 2014.
DOI : 10.1109/vppc.2014.7007088
URL : https://hal.archives-ouvertes.fr/hal-01208377

R. Schiferl and T. A. Lipo, Power capability of salient pole permanent magnet synchronous motors in variable speed drive applications, Industry Applications Society Annual Meeting, vol.46, p.48, 1988.
DOI : 10.1109/ias.1988.25037

B. Multon, J. Lucidarme, and L. Prévond, Analyse des possibilités de fonctionnement en régime des désexcitation des moteurs à aimants permanents, Journal de physique III, vol.5, issue.5, p.48, 1995.
DOI : 10.1051/jp3:1995150

W. L. Soong and T. Miller, Field-weakening performance of brushless synchronous ac motor drives, Electric Power Applications, IEE Proceedings, vol.141, p.48, 1994.
DOI : 10.1049/ip-epa:19941470

H. Ben-ahmed, N. Bernard, G. Feld, and B. Multon, Machines synchrones: Fonctionnement en régime autopiloté, vol.6, p.47, 2010.

M. Barcaro, N. Bianchi, and F. Magnussen, Design considerations to maximize performance of an ipm motor for a wide flux-weakening region, Electrical Machines (ICEM), 2010 XIX International Conference on, pp.1-7, 2010.

A. M. El-refaie, T. M. Jahns, and D. W. Novotny, Analysis of surface permanent magnet machines with fractional-slot concentrated windings, IEEE Transactions on Energy conversion, vol.21, issue.1, p.71, 2006.

F. Meinguet, E. Semail, and J. Gyselinck, Enhanced control of a pmsm supplied by a four-leg voltage source inverter using the homopolar torque, Electrical Machines, 2008. ICEM 2008. 18th International Conference on, vol.52, pp.1-6, 2008.

X. Kestelyn and E. Semail, Alimentation polyphasée par onduleur detension. aux éditions Hermes, Traité EGEM, Série Génie Electrique, septembre, p.58, 2009.

H. Zahr, E. Semail, and F. Scuiller, Paramètres clés pour la conception d'une machine pentaphasée à aimants à double polarité, Symposium de génie électrique (SGE), vol.61, p.64, 1959.

S. Sadeghi, A. Mohammadpour, and L. Parsa, Design optimization of a high performance five-phase slotless pmsm, Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2014 International Symposium on, p.61, 2014.

K. Wang, Z. Zhu, and G. Ombach, Torque enhancement of surface-mounted permanent magnet machine using third-order harmonic, IEEE Transactions on, vol.50, issue.3, p.61, 2014.

P. Zhao and G. Yang, Torque density improvement of five-phase pmsm drive for electric vehicles applications, Journal of Power Electronics, vol.11, issue.4, p.61, 2011.

B. Aslan and E. Semail, New 5-phase concentrated winding machine with bi-harmonic rotor for automotive application, Electrical Machines (ICEM), 2014 International Conference on, p.61, 2014.
DOI : 10.1109/icelmach.2014.6960476

J. Charpentier, E. Semail, and S. Clenet, Développement d'outils de conception de machines polyphasées à aimants basés sur l'approche multimachine, vol.62, p.204

A. Foggia, Methodes de Calcul des Inductances de fruites, p.68, 1999.

Z. Zhu and D. Howe, Influence of design parameters on cogging torque in permanent magnet machines, IEEE Transactions on, vol.15, issue.4, p.71, 2000.
DOI : 10.1109/iemdc.1997.604060
URL : http://eprints.whiterose.ac.uk/889/1/zhuzq20.pdf

A. B. Proca, A. Keyhani, A. El-antably, W. Lu, and M. Dai, Analytical model for permanent magnet motors with surface mounted magnets, IEEE transactions on energy conversion, vol.18, issue.3, p.71, 2003.
DOI : 10.1109/iemdc.1999.769236

Z. Zhu and D. Howe, Analytical prediction of the cogging torque in radial-field permanent magnet brushless motors, IEEE transactions on magnetics, vol.28, issue.2, p.71, 1992.

D. Howe and Z. Zhu, Instantaneous magnetic field distribution in brushless permanent magnet dc motors, IEEE Transactions on Magnetics, vol.29, issue.1, p.72, 1993.

R. Lateb, N. Takorabet, and F. Meibody-tabar, Effect of magnet segmentation on the cogging torque in surface-mounted permanent-magnet motors, IEEE Transactions on, vol.42, issue.3, p.74, 2006.

X. Kestelyn and E. Semail, A vectorial approach for generation of optimal current references for multiphase permanent-magnet synchronous machines in real time, IEEE Transactions on Industrial Electronics, vol.58, issue.11, p.80, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00785154

F. Scuiller, Magnet shape optimization to reduce pulsating torque for a five-phase permanentmagnet low-speed machine, IEEE Transactions on, vol.50, issue.4, p.80, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01060089

Z. Fang, Z. Zhu, L. Wu, and Z. Xia, Simple and accurate analytical estimation of slotting effect on magnet loss in fractional-slot surface-mounted pm machines, XXth International Conference on, vol.80, p.84, 2012.

N. Bianchi and E. Fornasiero, Impact of mmf space harmonic on rotor losses in fractional-slot permanent-magnet machines, IEEE Transactions on, vol.24, issue.2, p.91, 2009.

F. Dubas, C. Espanet, and A. Miraoui, Field diffusion equation in high-speed surface mounted permanent magnet motors, parasitic eddy-current losses, vol.80, pp.1-06, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00322441

R. Benlamine, F. Dubas, S. Randi, D. Lhotellier, and C. Espanet, 3-d numerical hybrid method for pm eddy-current losses calculation: Application to axial-flux pmsms, IEEE Transactions on Magnetics, vol.51, issue.7, p.80, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01184649

W. Huang, A. Bettayeb, R. Kaczmarek, and J. Vannier, Optimization of magnet segmentation for reduction of eddy-current losses in permanent magnet synchronous machine, IEEE Transactions on energy conversion, vol.25, issue.2, p.80, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00491390

A. M. El-refaie, M. R. Shah, R. Qu, and J. M. Kern, Effect of number of phases on losses in conducting sleeves of surface pm machine rotors equipped with fractional-slot concentrated windings, IEEE Transactions on Industry Applications, vol.44, issue.5, p.80, 2008.

N. Bianchi, S. Bolognani, and E. Fomasiero, A general approach to determine the rotor losses in three-phase fractional-slot pm machines, 2007 IEEE International Electric Machines & Drives Conference, vol.1, pp.634-641, 2007.

J. Pyrhonen, H. Jussila, Y. Alexandrova, P. Rafajdus, and J. Nerg, Harmonic loss calculation in rotor surface permanent magnets-new analytic approach, IEEE Transactions on Magnetics, vol.48, issue.8, p.80, 2012.

L. Wu, Z. Zhu, D. Staton, M. Popescu, and D. Hawkins, Analytical model for predicting magnet loss of surface-mounted permanent magnet machines accounting for slotting effect and load, IEEE transactions on magnetics, vol.48, issue.1, p.99, 2012.

R. Lateb, Modelisation des machines asynchrones et synchrones à aimants avec prise en compte des harmoniques d'espace et de temps: Application à la propulsion marine par pod, p.81, 2006.
URL : https://hal.archives-ouvertes.fr/tel-00138509

Z. Zhu, D. Howe, E. Bolte, and B. Ackermann, Instantaneous magnetic field distribution in brushless permanent magnet dc motors. i. open-circuit field, IEEE Transactions on, vol.29, issue.1, p.83, 1993.

Z. Zhu and D. Howe, Instantaneous magnetic field distribution in brushless permanent magnet dc motors. ii. armature-reaction field, Magnetics, IEEE Transactions on, vol.29, p.88, 1993.

E. Fornasiero, N. Bianchi, and S. Bolognani, Slot harmonic impact on rotor losses in fractional-slot permanent-magnet machines, IEEE Transactions on Industrial Electronics, vol.59, issue.6, p.92, 2012.

N. Bianchi, S. Bolognani, and E. Fornasiero, An overview of rotor losses determination in three-phase fractional-slot pm machines, IEEE Transactions on Industry Applications, vol.46, issue.6, p.93, 2010.

H. Zahr, F. Scuiller, and E. Semail, Ship propulsion and road vehicles and the international transportation electrification conference, 2016 IEEE International Conference on Electrical systems, aircraft, Railway, ship propulsion, p.107, 2016.

L. Lu, B. Aslan, L. Kobylanski, P. Sandulescu, F. Meinguet et al., Computation of optimal current references for flux-weakening of multi-phase synchronous machines, IECON 2012-38th Annual Conference on IEEE Industrial Electronics Society, vol.107, pp.3610-3615, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00785576

K. Atallah, J. Wang, S. D. Calverley, and S. Duggan, Design and operation of a magnetic continuously variable transmission, Industry Applications, vol.48, p.107, 2012.

S. Ho, S. Niu, and W. Fu, Design and analysis of a novel axial-flux electric machine, IEEE Transactions on, vol.47, issue.10, p.107, 2011.

T. Kume and M. Swamy, A quick transition electronic winding changeover technique for extended speed ranges, Power Electronics Specialists Conference, vol.5, pp.3384-3389, 2004.

J. R. Barnier, Modélisation des entra^?nementsa grande plage de vitesse en vue de leur conception, p.107, 2008.

I. Trifu, Research on reducing cogging torque in permanent magnet synchronous generators, p.126

N. Bianchi, M. Barcaro, and S. Bolognani, Electromagnetic and Thermal Analysis of Permanent Magnet Synchronous Machines, p.135, 2012.

J. Blum, J. Merwerth, and H. Herzog, Magnet eddy-current losses in interior permanent magnet machines with concentrated windings-analysis and reduction of the major source, 7th IET International Conference on. IET, vol.140, p.141, 2014.

A. Bettayeb, X. Jannot, and J. Vannier, Analytical calculation of rotor magnet eddy-current losses for high speed ipmsm, Electrical Machines (ICEM), 2010 XIX International Conference on, vol.140, pp.1-6, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00520389

A. R. Tariq, C. E. Nino-baron, and E. G. Strangas, Iron and magnet losses and torque calculation of interior permanent magnet synchronous machines using magnetic equivalent circuit, IEEE Transactions on Magnetics, vol.46, issue.12, p.140, 2010.

G. Bertotti, A. Boglietti, M. Chiampi, D. Chiarabaglio, F. Fiorillo et al., An improved estimation of iron losses in rotating electrical machines, IEEE Transactions on Magnetics, vol.27, issue.6, p.144, 1991.

. Bibliographie,

M. Fr??il?, Contribution à la prise en compte des pertes fer dans la modélisation des machines électriques par éléments finis, vol.1, p.144, 2012.

D. Jiles and D. Atherton, Theory of ferromagnetic hysteresis, Journal of magnetism and magnetic materials, vol.61, issue.1-2, p.144, 1986.

D. Lin, P. Zhou, W. Fu, Z. Badics, and Z. Cendes, A dynamic core loss model for soft ferromagnetic and power ferrite materials in transient finite element analysis," Magnetics, IEEE Transactions on, vol.40, issue.2, p.145, 2004.

J. Li, T. Abdallah, and C. R. Sullivan, Improved calculation of core loss with nonsinusoidal waveforms, Industry Applications Conference, 2001. Thirty-Sixth IAS Annual Meeting. Conference Record of the 2001 IEEE, vol.4, p.145, 2001.

A. Soualmi, F. Dubas, D. Dépernet, A. Randria, and C. Espanet, Inductances estimation in the dq axis for an interior permanent-magnet synchronous machines with distributed windings, XXth International Conference on, vol.157, pp.308-314, 2012.
URL : https://hal.archives-ouvertes.fr/hal-02300079

X. T. Jiang, B. Wang, W. K. Li, and H. W. Zhu, Inductance parameter simulation analysis and measurement of permanent magnet synchronous motors, Advanced Materials Research, vol.651, pp.931-936, 2013.

N. Bianchi and S. Bolognani, Magnetic models of saturated interior permanent magnet motors based on finite element analysis, Industry Applications Conference, 1998. Thirty-Third IAS Annual Meeting. The, vol.1, pp.27-34, 1998.

N. Leboeuf, T. Boileau, B. Nahid-mobarakeh, N. Takorabet, F. Meibody-tabar et al., Inductance calculations in permanent-magnet motors under fault conditions, IEEE Transactions on Magnetics, vol.48, issue.10, p.157, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00734110

E. Levi, Saturation modelling in dq axis models of salient pole synchronous machines, IEEE transactions on energy conversion, vol.14, issue.1, p.157, 1999.

T. Barisa, D. Sumina, and M. Kutija, Comparison of maximum torque per ampere and loss minimization control for the interior permanent magnet synchronous generator, 2015 International Conference on, vol.171, pp.497-502, 2015.

E. Rashad, T. Radwan, and M. Rahman, A maximum torque per ampere vector control strategy for synchronous reluctance motors considering saturation and iron losses, 39th IAS Annual Meeting. Conference Record of the 2004 IEEE, vol.4, pp.2411-2417, 2004.

A. Rabiei, T. Thiringer, M. Alatalo, and E. Grunditz, Improved maximum torque per ampere algorithm accounting for core saturation, cross coupling effect and temperature for a pmsm intended for vehicular applications, p.171

R. Rathnayake, R. Dutta, J. Fletcher, and D. Xiao, Modified efficiency optimization control for fractional slot concentrated wound interior permanent magnet synchronous generators, Industrial Electronics Society, IECON 2015-41st Annual Conference of the IEEE, p.171, 2015.

. Bibliographie,

M. Saur, B. Lehner, F. Hentschel, D. Gerling, and R. D. Lorenz, Db-dtfc as loss minimizing control for synchronous reluctance drives, Industrial Electronics Society, pp.2015-2056

, Annual Conference of the IEEE, 2015.

A. Ruf, A. Thul, S. Steentjes, and K. Hameyer, Loss minimizing control strategy for electrical machines considering iron loss distribution, 2015 IEEE International Electric Machines & Drives Conference (IEMDC), vol.171, pp.974-980, 2015.

G. Jilin, B. Aslan, F. Gillon, and E. Semail, High speed functionality optimization of five-phase pm machine using 3rd harmonic current, International Journal for Computation and Mathematics in Electrical and Electronic Engineering, p.175, 2014.

J. Gong, Modélisation et conception optimale d'un moteur linéaire à induction pour système de traction ferroviaire, p.175, 2011.

A. M?ot, M. Korkosz, P. Grodzki, and M. ?ukaniszyn, Analysis of the proximity and skin effects on copper loss in a stator core, Archives of Electrical Engineering, vol.63, issue.2, p.184, 2014.

A. Berbecea, S. Kreuawan, F. Gillon, and P. Brochet, A parallel multiobjective efficient global optimization: The finite element method in optimal design and model development, IEEE Transactions on, vol.46, issue.8, p.215, 2010.

M. Schonlau, W. J. Welch, and D. R. Jones, Global versus local search in constrained optimization of computer models, Lecture Notes-Monograph Series, pp.11-25, 1998.