, L'interaction de ces courants avec les forces électromotrices de la Figure 110 (composées d'un harmonique 1 et 3) donnent un couple constant

Y. Li and H. K. Florig, Modeling the Operation and Maintenance Costs of a Large Scale Tidal Current Turbine Farm, pp.1-6, 2006.

J. Ribrant and L. M. Bertling, Survey of Failures in Wind Power Systems With Focus on Swedish Wind Power Plants During, IEEE Transactions on Energy Conversion, vol.22, pp.167-173, 1997.

S. Faulstich, B. Hahn, and P. J. Tavner, Wind turbine downtime and its importance for offshore deployment, Wind Energy, vol.14, pp.327-337, 2011.

S. Dwari and L. Parsa, An Optimal Control Technique for Multiphase PM Machines Under Open-Circuit Faults, IEEE Transactions on Industrial Electronics, vol.55, 1988.

F. Mekri, S. B. Elghali, and M. E. Benbouzid, Fault-Tolerant Control Performance Comparison of Three-and Five-Phase PMSG for Marine Current Turbine Applications, IEEE Transactions on Sustainable Energy, vol.4, pp.425-433, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00803242

E. A. Klingshirn, High Phase Order Induction Motors-Part I-Description and Theoretical Considerations, IEEE Transactions on Power Apparatus and Systems, pp.47-53, 1983.

E. A. Klingshirn, High Phase Order Induction Motors-Part II-Experimental Results, IEEE Transactions on Power Apparatus and Systems, pp.54-59, 1983.

F. Scuiller, E. Semail, J. F. Charpentier, and P. Letellier, Multi-criteria-based design approach of multi-phase permanent magnet low-speed synchronous machines, IET Electric Power Applications, vol.3, pp.102-110, 2009.

S. Benelghali, F. Mekri, M. Benbouzid, and J. Charpentier, Performance comparison of three-and five-phase permanent magnet generators for marine current turbine applications under open-circuit faults, presented at the International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), 2011.
URL : https://hal.archives-ouvertes.fr/hal-00631575

B. Multon, Énergies marines renouvelables: aspects généraux, éolien, marémoteur et hydrolien, 2011.

S. Benelghali, On Multiphysics Modeling and Control of Marine Current Turbine Systems, 2009.
URL : https://hal.archives-ouvertes.fr/tel-00521615

Z. Hui, A. Danxiang, and Z. Chengke, Energy diversification and sustainable economy growth, E-Business and E-Government (ICEE), 2011 International Conference on, pp.1-4, 2011.

A. Prayitno and A. Awaluddin, Renewable energy mapping at Riau Province: Promoting Energy Diversification for sustainable development (a case study), Energy and Sustainable Development: Issues and Strategies (ESD), 2010.

, Proceedings of the International Conference on, pp.1-4, 2010.

C. Legrand, Assessment of tidal energy resource: Marine renewable energy guides: European Marine Energy Centre, 2009.

M. Khan, G. Bhuyan, M. Iqbal, and J. Quaicoe, Hydrokinetic energy conversion systems and assessment of horizontal and vertical axis turbines for river and tidal applications: A technology status review, Applied Energy, vol.86, pp.1823-1835, 2009.

B. Multon, Marine Renewable Energy Handbook, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01853756

S. Djebarri, J. F. Charpentier, F. Scuiller, and M. Benbouzid, A systemic design methodology of PM generators for fixed-pitch marine current turbines, pp.32-37, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01023488

Z. Zhou, F. Scuiller, J. Charpentier, and T. Tang, Power Limitation Control for a PMSG-Based Marine Current Turbine at High Tidal Speed and Strong Sea State, presented at the International conference on Electric Machines & Drives (IEMDC), 2013.
URL : https://hal.archives-ouvertes.fr/hal-00874047

M. Arnold, F. Biskup, and P. W. Cheng, Load reduction potential of variable speed control approaches for fixed pitch tidal current turbines, International Journal of Marine Energy, 2016.

R. Jiang, K. Zhang, Z. Ma, and D. Wang, Fault mode, effects and criticality analysis for overheating fault of wind turbines gearbox and generator, International Conference on Renewable Power Generation, pp.1-5, 2015.

A. Dieng, Modélisation dynamique et commande d'un ensemble «génératrice synchrone pentaphasée à FEM non sinusoïdale-convertisseur AC/DC» tolérant aux défauts, Nantes, 2014.

C. Yeh and N. A. Demerdash, Induction motor-drive systems with fault tolerant inverter-motor capabilities, 2007 IEEE International Electric Machines & Drives Conference, pp.1451-1458, 2007.

B. Tabbache, M. Benbouzid, A. Kheloui, J. Bourgeot, and A. Mamoune, An improved fault-tolerant control scheme for PWM inverter-fed induction motor-based EVs, ISA transactions, vol.52, pp.862-869, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00926206

O. Thorsen and M. Dalva, A survey of the reliability with an analysis of faults on variable frequency drives in industry, European Conference on Power Electronics and Applications, 1995.

U. Military, Reliability prediction of electronic equipment

Y. Song and B. Wang, Survey on reliability of power electronic systems, IEEE Transactions on Power Electronics, vol.28, pp.591-604, 2013.

B. Lu and S. K. Sharma, A literature review of IGBT fault diagnostic and protection methods for power inverters, IEEE Transactions on Industry Applications, vol.45, pp.1770-1777, 2009.

S. Yang, A. Bryant, P. Mawby, D. Xiang, L. Ran et al., An industry-based survey of reliability in power electronic converters, IEEE Transactions on Industry Applications, vol.47, pp.1441-1451, 2011.

J. Martin, Contribution à l'alimentation en tension de machines synchrones à aimants permanents à nombre de phases elevé: fonctionnement normal et dégradé, Vandoeuvre-les-Nancy, INPL, 2003.

R. R. Errabelli and P. Mutschler, A fault tolerant control and power electronic for a permanent magnet synchronous motor drive, Proceedings of the 2011-14th European Conference on, pp.1-10, 2011.

R. L. De-araujo-ribeiro, C. B. Jacobina, E. R. Da, A. M. Silva, and . Lima, Faulttolerant voltage-fed PWM inverter AC motor drive systems, IEEE Transactions on Industrial Electronics, vol.51, pp.439-446, 2004.

B. A. Welchko, T. A. Lipo, T. M. Jahns, and S. E. Schulz, Fault tolerant three-phase AC motor drive topologies: a comparison of features, cost, and limitations, IEEE Transactions on power electronics, vol.19, pp.1108-1116, 2004.

D. Flieller, N. K. Nguyen, H. Schwab, and G. Sturtzer, Commandes d'actionneurs électriques synchrones et spéciaux-Chapitre

X. Kestelyn, Modélisation vectorielle multimachines pour la commande des ensembles convertisseurs-machines polyphasés, PhD, 2003.

J. Fu and T. A. Lipo, A strategy to isolate the switching device fault of a current regulated motor drive, Industry Applications Society Annual Meeting, pp.1015-1020, 1993.

S. Bolognani, M. Zordan, and M. Zigliotto, Experimental fault-tolerant control of a PMSM drive, IEEE Transactions on Industrial Electronics, vol.47, pp.1134-1141, 2000.

L. Parsa and H. A. Toliyat, Fault-tolerant interior-permanent-magnet machines for hybrid electric vehicle applications, IEEE Transactions on Vehicular Technology, vol.56, pp.1546-1552, 2007.

S. Williamson, S. Smith, and C. Hodge, Fault tolerance in multiphase propulsion motors, Journal of Marine Engineering & Technology, vol.3, pp.3-7, 2004.

E. Semail, X. Kestelyn, and F. Locment, Fault tolerant multiphase electrical drives: The impact of design, Reliability in Electromagnetic Systems, pp.1-5, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00819009

A. M. El-refaie, Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges, Industrial Electronics, vol.57, pp.107-121, 2010.

Y. Li, J. Zhao, Z. Chen, X. Liu, and H. Chen, Fault tolerant control of dual-rotor PMSM under open-circuit fault conditions, Electrical Machines and Systems (ICEMS), pp.1227-1232, 2014.

B. Basler, T. Greiner, and P. Heidrich, Fault-tolerant strategies for double threephase PMSM used in Electronic Power Steering systems, Transportation Electrification Conference and Expo (ITEC), pp.1-6, 2015.

Z. Liang, P. Kou, and D. Liang, A fault tolerant control strategy for dual three-phase permanent magnet synchronous motor servo system based on frequency domain analysis, 2016 Eleventh International Conference on Ecological Vehicles and Renewable Energies, pp.1-13, 2016.

C. J. Gajanayake, B. Bhangu, S. Nadarajan, and G. Jayasinghe, Fault tolerant control method to improve the torque and speed response in PMSM drive with winding faults, Power Electronics and Drive Systems (PEDS), pp.956-961, 2011.

O. Wallmark, L. Harnefors, and O. Carlson, Control algorithms for a fault-tolerant PMSM drive, 31st Annual Conference of IEEE Industrial Electronics Society, p.7, 2005.

P. Sandulescu, F. Meinguet, X. Kestelyn, E. Semail, and A. Bruy, Control Strategies for Open-End Winding Drives Operating in the Flux-Weakening Region, IEEE Transactions on Power Electronics, vol.29, pp.4829-4842, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00876143

B. A. Welchko, A double-ended inverter system for the combined propulsion and energy management functions in hybrid vehicles with energy storage, 31st Annual Conference of IEEE Industrial Electronics Society, p.6, 2005.

H. Jin, K. Min, Y. Jia-qiang, J. Hai-bo, and L. Dong, Multiphase machine theory and its applications, International Conference on Electrical Machines and Systems, ICEMS, pp.1-7, 2008.

E. Levi, Multiphase Electric Machines for Variable-Speed Applications, IEEE Transactions on Industrial Electronics, vol.55, pp.1893-1909, 2008.

G. K. Singh, Multi-phase induction machine drive research-a survey, Electric Power Systems Research, vol.61, pp.139-147, 2002.

A. S. Abdel-khalik, M. I. Masoud, S. Ahmed, and A. Massoud, Calculation of derating factors based on steady-state unbalanced multiphase induction machine model under open phase(s) and optimal winding currents, Electric Power Systems Research, vol.106, pp.214-225, 2014.

A. Mohammadpour and L. Parsa, A Unified Fault-Tolerant Current Control Approach for Five-Phase PM Motors with Trapezoidal Back EMF under Different Stator Winding Connections, IEEE Transactions on Power Electronics, vol.28, pp.3517-3527, 2013.

N. Bianchi, S. Bolognani, and M. D. Pre, Strategies for the Fault-Tolerant Current Control of a Five-Phase Permanent-Magnet Motor, IEEE Transactions on Industry Applications, vol.43, pp.960-970, 2007.

F. Meinguet, N. Ngac-ky, P. Sandulescu, X. Kestelyn, and E. Semail, Fault-tolerant operation of an open-end winding five-phase PMSM drive with inverter faults, International Conference on Industrial Electronics Society, pp.5191-5196, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00876144

F. Locment, E. Semail, and X. Kestelyn, Vectorial Approach-Based Control of a Seven-Phase Axial Flux Machine Designed for Fault Operation, IEEE Transactions on Industrial Electronics, vol.55, pp.3682-3691, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00817669

X. Kestelyn, Y. Crevits, and E. Semail, Fault tolerant control of a seven-phase drive by degrees of freedom adaptation, International Conference on Industrial Technology (ICIT), IEEE 2010, pp.1513-1518
URL : https://hal.archives-ouvertes.fr/hal-00819006

N. K. Nguyen, D. Flieller, X. Kestelyn, and E. Semail, Analytical Optimal Currents for Multiphase PMSMs Under Fault Conditions and Saturation, presented at the International conference on Industrial Electronics IECON, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01059050

S. Dwari and L. Parsa, Fault-Tolerant Control of Five-Phase Permanent-Magnet Motors With Trapezoidal Back EMF, IEEE Transactions on Industrial Electronics, vol.58, pp.476-485, 2011.

X. Kestelyn and E. Semail, A Vectorial Approach for Generation of Optimal Current References for Multiphase Permanent-Magnet Synchronous Machines in Real Time, IEEE Transactions on Industrial Electronics, vol.58, pp.5057-5065, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00785154

D. Flieller, N. K. Nguyen, P. Wira, G. Sturtzer, D. O. Abdeslam et al., A self-learning solution for torque ripple reduction for nonsinusoidal permanent-magnet motor drives based on artificial neural networks, IEEE Transactions on Industrial Electronics, vol.61, pp.655-666, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00794383

J. P. Martin, F. Meibody-tabar, and B. Davat, Multiple-phase permanent magnet synchronous machine supplied by VSIs, working under fault conditions, Industry Applications Conference, vol.3, pp.1710-1717, 2000.

R. Hyung-min, K. Ji-woong, and S. Seung-ki, Synchronous frame current control of multi-phase synchronous motor-part II asymmetric fault condition due to open phases, 39th IAS Annual Meeting. Conference Record of the, pp.1-275, 2004.

N. K. Nguyen, F. Meinguet, E. Semail, and X. Kestelyn, Fault-tolerant operation of an open-end winding five-phase PMSM drive with short-circuit inverter fault, IEEE Transactions on Industrial Electronics, vol.63, pp.595-605, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01107887

N. Nguyen, E. Semail, F. Meinguet, P. Sandulescu, X. Kestelyn et al., Different Virtual Stator Winding Configurations of Open-End Winding Five-Phase PM Machines for Wide Speed Range Without Flux Weakning Operation, presented at the European Conference on Power Electronics and Applications (EPE), 2013.

X. Kestelyn and E. Semail, Commandes d'actionneurs électriques synchrones et spéciaux-Chapitre, vol.5, 2011.

E. Semail, A. Bouscayrol, and J. Hautier, Vectorial formalism for analysis and design of polyphase synchronous machines, The European Physical JournalApplied Physics, vol.22, pp.207-220, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01099083

X. Kestelyn, E. Semail, and J. Hautier, Vectorial multi-machine modeling for a fivephase machine, International Congress on Electrical Machines (ICEM'02), 2002.

E. Semail, F. Meibody-tabar, M. Benkhoris, H. Razik, M. Pietrzak-david et al., Représentations SMM de Machines Polyphasées, vol.8, pp.221-239, 2005.

Z. Zhibin, F. Scuiller, J. F. Charpentier, M. E. Hachemi-benbouzid, and T. Tianhao, Power Control of a Nonpitchable PMSG-Based Marine Current Turbine at Overrated Current Speed With Flux-Weakening Strategy, IEEE Journal, vol.40, pp.536-545, 2015.

O. Fall, N. K. Nguyen, J. F. Charpentier, P. Letellier, E. Semail et al., Variable speed control of a 5-phase permanent magnet synchronous generator including voltage and current limits in healthy and open-circuited modes, Electric Power Systems Research, vol.140, pp.507-516, 2016.

O. Fall, J. F. Charpentier, N. Ngac-ky, and P. Letellier, Maximum torque per ampere control strategy of a 5-phase PM generator in healthy and faulty modes for tidal marine turbine application, Electronics and Application Conference and Exposition, pp.468-473, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01086994

S. Zhigang, W. Jiabin, G. W. Jewell, and D. Howe, Enhanced Optimal Torque Control of Fault-Tolerant PM Machine Under Flux-Weakening Operation, IEEE Transactions on Industrial Electronics, vol.57, pp.344-353, 2010.

L. Parsa, N. Kim, and H. A. Toliyat, Field Weakening Operation of High Torque Density Five-Phase Permanent Magnet Motor Drives, International Conference on Electric Machines and Drives, pp.1507-1512, 2005.

L. Lu, E. Semail, L. Kobylanski, and X. Kestelyn, Flux-weakening strategies for a five-phase PM synchronous machine, European Conference on Power Electronics and Applications, pp.1-7, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00785578

X. Kestelyn, O. Gomozov, J. Buire, F. Colas, N. K. Nguyen et al., Investigation on model predictive control of a five-phase permanent magnet synchronous machine under voltage and current limits, IEEE International Conference on, pp.2281-2287, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01195725

A. P. Sandulescu, F. Meinguet, X. Kestelyn, E. Semail, and A. Bruyere, Fluxweakening operation of open-end winding drive integrating a cost-effective highpower charger, Electrical Systems in Transportation, vol.3, pp.10-21, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00790157

W. Cao, B. C. Mecrow, G. J. Atkinson, J. W. Bennett, and D. J. Atkinson, Overview of electric motor technologies used for more electric aircraft (MEA), IEEE Transactions on Industrial Electronics, vol.59, pp.3523-3531, 2012.

H. Schwab, A. Klönne, S. Reck, I. Ramesohl, G. Sturtzer et al., Reliability evaluation of a permanent magnet synchronous motor drive for an automotive application, Conf. Rec. IEEE EPE 10th Euro. Conf, pp.2-4, 2003.

H. A. Toliyat, Analysis and simulation of five-phase variable-speed induction motor drives under asymmetrical connections, IEEE Transactions on Power Electronics, vol.13, pp.748-756, 1998.

F. Jen-ren and T. A. Lipo, Disturbance-free operation of a multiphase currentregulated motor drive with an opened phase, IEEE Transactions on Industry Applications, vol.30, pp.1267-1274, 1994.

J. A. Guemes, A. M. Iraolagoitia, M. P. Donsion, and J. I. Hoyo, Analysis of torque in permanent magnet synchronous motors with fractional slot windings, Electrical Machines, 2008. ICEM 2008. 18th International Conference on, pp.1-4, 2008.

B. Aslan, Design of Multiphase PM Machine with Fractional Slot ConcentratedWindings and Wide Speed Range, 2013.
URL : https://hal.archives-ouvertes.fr/pastel-00973528

J. Pyrhönen, T. Jokinen, and V. Hrabovcovà, Design of Rotating Electrical Machines, 2007.

F. Libert and J. Soulard, Investigation on Pole-Slot Combinations for PermanentMagnet Machines with Concentrated Windings, 2004.

P. Salminen, Fractional slot permanent magnet synchronous motors for low speed applications, 2004.

C. Gerada and K. J. Bradley, Integrated PM Machine Design for an Aircraft EMA, IEEE Transactions on Industrial Electronics, vol.55, pp.3300-3306, 2008.

F. Meier, Permanent-magnet synchronous machines with non-overlapping concentrated windings for low-speed direct-drive applications, 2008.

N. Bianchi and M. D. Pre, Use of the star of slots in designing fractional-slot singlelayer synchronous motors, IEE Proceedings-Electric Power Applications, vol.153, pp.459-466, 2006.

A. I. Smolenski, Machines électriques: Editorial Mir, 1983.

J. Chatelain, Machines électriques: Georgi, 1983.

J. Cros and P. Viarouge, Synthesis of high performance PM motors with concentrated windings, IEEE Transactions on, vol.17, pp.248-253, 2002.

F. Magnussen and C. Sadarangani, Winding factors and Joule losses of permanent magnet machines with concentrated windings, Electric Machines and Drives Conference, vol.1, pp.333-339, 2003.

Z. Q. Zhu, D. Howe, E. Bolte, and B. Ackermann, Instantaneous magnetic field distribution in brushless permanent magnet DC motors. I. Open-circuit field, IEEE Transactions on, vol.29, pp.124-135, 1993.

A. B. Proca, A. Keyhani, A. El-antably, L. Wenzhe, and D. Min, Analytical model for permanent magnet motors with surface mounted magnets, IEEE Transactions on Energy Conversion, vol.18, pp.386-391, 2003.

C. Studer, A. Keyhani, T. Sebastian, and S. K. Murthy, Study of cogging torque in permanent magnet machines, Industry Applications Conference, 1997. ThirtySecond IAS Annual Meeting, IAS '97., Conference Record of the 1997 IEEE, vol.1, pp.42-49, 1997.

Z. Q. Zhu and D. Howe, Analytical prediction of the cogging torque in radial-field permanent magnet brushless motors, IEEE Transactions on Magnetics, vol.28, pp.1371-1374, 1992.

Z. Q. Zhu and D. Howe, Influence of design parameters on cogging torque in permanent magnet machines, IEEE Transactions on Energy Conversion, vol.15, pp.407-412, 2000.

L. Dosiek and P. Pillay, Cogging Torque Reduction in Permanent Magnet Machines, IEEE Transactions on Industry Applications, vol.43, pp.1565-1571, 2007.

F. Scuiller, Développement d'outils de conception de Machines polyphasées à aimants utilisant l'Approche multimachine, Arts et Métiers ParisTech, 2006.

J. F. Gieras, Analytical approach to cogging torque calculation of PM brushless motors, IEEE Transactions on Industry Applications, vol.40, pp.1310-1316, 2004.

S. Hwang, J. Eom, Y. Jung, D. Lee, and B. Kang, Various design techniques to reduce cogging torque by controlling energy variation in permanent magnet motors, IEEE transactions on magnetics, vol.37, pp.2806-2809, 2001.

S. Hwang, J. Eom, G. Hwang, W. Jeong, and Y. Jung, Cogging torque and acoustic noise reduction in permanent magnet motors by teeth pairing, IEEE Transactions on Magnetics, vol.36, pp.3144-3146, 2000.

F. Scuiller and E. Semail, Inductances and Back-emf Harmonics Influence on the Torque/Speed Characteristic of Five-Phase SPM Machine, Vehicle Power and Propulsion Conference (VPPC), pp.1-6, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01208377

Z. Q. Zhu and D. Howe, Winding inductances of brushless machines with surfacemounted magnets, Electric Machines and Drives Conference Record, 1997.

O. Fall, J. Charpentier, N. Nguyen, and P. Letellier, Performances comparison of different concentrated-winding configurations for 5-phase PMSG in normal and faulty modes in flux weakening operation for fixed pitch tidal turbines, XXII International Conference on, pp.2789-2795, 2016.

O. Fall, J. Charpentier, N. Nguyen, and P. Letellier, Comparaison de Performances de Différentes Structures de Machines Synchrones à Aimants Permanents (MSAP) Polyphasées en Mode Normal et en Modes Dégradés en Vitesse Variable avec Défluxage pour des Applications Hydroliennes, 2016.

N. Moubayed, Alimentation par onduleurs de tension des machines multi-étoiles, 1999.

B. Aslan, E. Semail, and J. Legranger, General Analytical Model of Magnet Average Eddy-Current Volume Losses for Comparison of Multiphase PM Machines With Concentrated Winding, IEEE Transactions on Energy Conversion, vol.29, pp.72-83, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01009626

N. Bianchi and E. Fornasiero, Impact of MMF Space Harmonic on Rotor Losses in Fractional-Slot Permanent-Magnet Machines, IEEE Transactions on Energy Conversion, vol.24, pp.323-328, 2009.

E. Fornasiero, N. Bianchi, and S. Bolognani, Rotor losses in fractional-slot threephase and five-phase PM machines, Electrical Machines (ICEM), 2010 XIX International Conference on, pp.1-5, 2010.

A. M. Refaie, M. R. Shah, R. Qu, and J. M. Kern, Effect of Number of Phases on Losses in Conducting Sleeves of Surface PM Machine Rotors Equipped With Fractional-Slot Concentrated Windings, IEEE Transactions on Industry Applications, vol.44, pp.1522-1532, 2008.

T. J. Miller, M. I. Mcgilp, and K. W. Klontz, Approximate methods for calculating rotor losses in permanent-magnet brushless machines, Electric Machines and Drives Conference, pp.1-8, 2009.

J. Pyrhonen, H. Jussila, Y. Alexandrova, P. Rafajdus, and J. Nerg, Harmonic Loss Calculation in Rotor Surface Permanent Magnets—New Analytic Approach, IEEE Transactions on Magnetics, vol.48, pp.2358-2366, 2012.

D. Ishak, Z. Q. Zhu, and D. Howe, Eddy-current loss in the rotor magnets of permanent-magnet brushless machines having a fractional number of slots per pole, IEEE Transactions on Magnetics, vol.41, pp.2462-2469, 2005.

L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, Analytical Model for Predicting Magnet Loss of Surface-Mounted Permanent Magnet Machines Accounting for Slotting Effect and Load, IEEE Transactions on Magnetics, vol.48, pp.107-117, 2012.

E. Fornasiero, N. Bianchi, and S. Bolognani, Slot Harmonic Impact on Rotor Losses in Fractional-Slot Permanent-Magnet Machines, IEEE Transactions on Industrial Electronics, vol.59, pp.2557-2564, 2012.

J. Li, D. W. Choi, D. H. Son, and Y. H. Cho, Effects of MMF Harmonics on Rotor Eddy-Current Losses for Inner-Rotor Fractional Slot Axial Flux Permanent Magnet Synchronous Machines, IEEE Transactions on Magnetics, vol.48, pp.839-842, 2012.

Z. Q. Zhu, D. Ishak, D. Howe, and J. Chen, Unbalanced Magnetic Forces in Permanent-Magnet Brushless Machines With Diametrically Asymmetric Phase Windings, IEEE Transactions on Industry Applications, vol.43, pp.1544-1553, 2007.

F. Magnussen and H. Lendenmann, Parasitic Effects in PM Machines With Concentrated Windings, IEEE Transactions on Industry Applications, vol.43, pp.1223-1232, 2007.

M. Fakam, M. Hecquet, V. Lanfranchi, and A. Randria, Design and Magnetic Noise Reduction of the Surface Permanent Magnet Synchronous Machine Using Complex Air-Gap Permeance, IEEE Transactions on Magnetics, vol.51, pp.1-9, 2015.

Z. Zhu and D. Howe, Electromagnetic noise radiated by brushless permanent magnet DC drives, Sixth International Conference on, pp.606-611, 1993.

A. Masmoudi and Z. Zhu, Fractional slot permanent magnet brushless machines and drives for electric and hybrid propulsion systems, vol.30, pp.9-31, 2011.

S. Djebarri, Contribution à la modélisation et à la conception optimale de génératrices à aimants permanents pour hydroliennes, 2015.

L. Drouen, Machines électriques intégrées à des hélices marines: contribution à une modélisation et conception multi-physique, Arts et Métiers ParisTech, 2010.

A. S. Bahaj, A. F. Molland, J. R. Chaplin, and W. M. Batten, Power and thrust measurements of marine current turbines under various hydrodynamic flow conditions in a cavitation tunnel and a towing tank, Renewable Energy, vol.32, pp.407-426, 2007.

Z. Q. Zhu and D. Howe, Instantaneous magnetic field distribution in brushless permanent magnet DC motors. III. Effect of stator slotting, IEEE Transactions on, vol.29, pp.143-151, 1993.

P. Ponomarev, Y. Alexandrova, I. Petrov, P. Lindh, E. Lomonova et al., Inductance Calculation of Tooth-Coil Permanent-Magnet Synchronous Machines, Industrial Electronics, vol.61, pp.5966-5973, 2014.