The heat recovery potential in the French industry: opportunities for heat pump systems, ECLEER 2009 Summer study ,

, Valorization of low temperature heat, European Community's Seventh Framework Program (FP7/2007-2013) under grant agreement n° 256790

Waste heat recovery: Technology and Opportunities, 2008. ,

A Method to Evaluate the Waste Heat Recovery Potential Across the Industrial Sectors, ECOS 2013: Proceedings of the 26 th International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems, 2013. ,

Identification of the waste heat potential in industry, in terms of heat carrier and identification of the optimal usage. European Community's Seventh Framework Program (FP7/2007-2013) under grant agreement n° 256790 ,

, Potentiel de récupération de chaleur à partir des effluents industriels, 1999.

Second law analysis of a waste heat recovery based power generation system, International Journal of Heat Mass Transfer, vol.50, pp.2355-63, 2007. ,

Reference Fluid Thermodynamic and Transport Properties, NIST Standard Reference Database, vol.23, 2010. ,

Methodology for calculating exergy in chemical process. The American Society of Mechanical Engineers, Thermodynamic analysis of chemically reactive systems-AES, vol.4 ,

, Bilans entropiques et exergétiques. Techniques de l'ingénieur, Be8008, 2005.

Heat recovery from diesel engines: A thermodynamic comparison between Kalina and ORC cycles, ECOS 2012: Proceedings of the 25th International Conference on Efficiency, Cost, Optimization, vol.30, pp.212-219, 2010. ,

Parametric optimization and comparative study of Organic Rankine Cycle (ORC) for low grade waste heat recovery, Energy Conversion and Management, vol.50, pp.576-582, 2009. ,

A review of Organic Rankine Cycles (OECs) for the recovery of low-grade waste heat, Energy, vol.22, issue.7, pp.661-667, 1997. ,

Effect of working fluids on Organic Rankine Cycle for waste heat recovery, Energy, vol.29, pp.1207-1224, 2004. ,

Parametric optimization and performance analysis of a waste heat recovery system using Organic Rankine Cycle, Energy, vol.35, pp.5049-5062, 2010. ,

Performance analysis of an Organic Rankine Cycle with superheating under different heat source temperature conditions, Applied Energy, vol.88, pp.2995-3004, 2011. ,

Review of Industrial Condensing Boilers (Technology&Cost), Case Study: Thermal design of a condensing boiler in a large scale biomass district heating plant (40MW), Anti-Corrosion Methods and Materials, vol.51, pp.173-183, 2004. ,

Predicting Dew Points of Gases, Chemical Engineering Progress, vol.78, pp.71-72, 1974. ,

Estimating Acid Dewpoints in Stack Gases, Chemical Engineering, vol.84, pp.125-128, 1977. ,

Recovery of water from boiler flue gas unsing condensing heat exchangers. Final technical report, 2011. ,

Boiler stack gas heat recovery, 1987. ,

Compact Heat Exchanger Surface Selection Methods, Proceedings of Sixth International Heat Transfer Conference, vol.4, pp.193-199, 1978. ,

Optimal Design of crossflow Heat Exchangers, J. Heat Transfer, vol.113, pp.341-347, 1991. ,

General criteria for rating heat exchanger performance, International Journal of Heat and Mass Transfer, vol.21, pp.655-658, 1978. ,

A study of entropy generation in fundamental convective heat transfer, Journal of Heat Transfer, vol.101, pp.718-725, 1979. ,

Optimal Design of Tube Banks in Cross-flow Using Entropy Generation Minimization Method. 44th, Aerospace Sciences Meeting and Exhibit, vol.9, 2006. ,

, American Society of Heating, Refrigeration and Air-Conditioning Engineers, p.22, 2008.

Heat transfer and friction correlation for plate finned tube heat exchangers having plain fins, Proc. 8th heat transfer conference, pp.2745-2750, 1986. ,

Fundamental of heat and mass transfer, 1996. ,

Fin efficiency calculation in enhanced fin-and-tube heat exchangers in dry conditions. International Congress of Refrigeration, 2003. ,

Air side investigation of high efficiency heat exchangers used in room air conditioners, 2004. ,

Engineering data book, 2005. ,

Investigation of flow boiling in horizontal tubes: Part I-A new diabatic two-phase flow pattern map, Int. J. Heat and Mass Transfer, vol.48, pp.2955-2969, 2005. ,

Engineering data book III. Condensation on external surfaces, 2005. ,

Effects of air-side surface wettability on the performance of dehumidifying heat exchangers, 2004. ,

Error analysis and propagation of errors. Stowers Institute for Medical Research, 2008. ,

Prediction of two-phase pressure gradients of refrigerants in horizontal tubes, Etude et conception des systèmes Air/Air inversables utilisant des mélanges à glissement de temperature. Thesis, vol.29, pp.935-947, 1986. ,

Improved friction pressure drop correlations for horizontal and vertical two-phase pipe flow, Phase Flow Group Meeting, 1979. ,

Friction factor in U-type undulated pipe, J. Fluid Eng, vol.122, pp.260-263, 2000. ,

Prediction and simulation of two-phase pressure drop in return bends, International Journal of Refrigeration, vol.32, pp.1776-1783, 2009. ,

URL : https://hal.archives-ouvertes.fr/hal-00446701

Calculation of void volume fraction in the sub cooled and quality boiling regions, Int. J. Heat Mass Transfer, vol.13, pp.383-393, 1970. ,

Performance of plate finned tube heat exchangers under dehumidifying conditions, ASME J. Heat transfer, vol.119, pp.109-117, 1997. ,

Heat and mass transfer for plate fin-and-tube heat exchangers with and without coating, Int. J. Heat and Mass Transfer, vol.41, pp.3109-3120, 1998. ,

Air-side performance of herringbone fin-and-tube heat exchangers in wet conditions, Canadian J. Chemical Engineering, vol.77, pp.1225-1230, 1999. ,

An airside correlation for plain fin-and tube heat exchangers in wet conditions, International Journal of Heat and Mass Transfer, vol.43, pp.1869-1872, 2000. ,

Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part II: Correlation, International Journal of Heat and Mass Transfer, vol.43, pp.2693-2700, 2000. ,

Empirical correlations for heat transfer and flow friction characteristics of herringbone wavy fin-and-tube heat exchangers, International Journal of Refrigeration, vol.25, pp.673-680, 2002. ,

A critical investigation into the heat and mass transfer analysis of counter-flow wet cooling towers, Int. J. Heat and Mass Transfer, vol.48, pp.765-777, 2005. ,

The effect of Prewetting on the pressure drop, liquid hold-upand gas liquid mass transfer in Trickle Column Reactor, 2006. ,

, American Society of Heating, Refrigeration and Air-Conditioning Engineers, p.22, 2008.

Fluid Dynamics and Mass Transfer in the Total Capacity Range of Packed Columns up to the Flood Point, Chem. Eng. Tech, vol.18, pp.371-379, 1995. ,

Stretching the capacity of structured Pakings, Ind. Eng. Chem. Res, vol.40, pp.6172-6180, 2001. ,

A corrugation geometry based model for efficiency of structured distillation packing, Chemical Engineering and Processing, vol.38, pp.683-695, 1999. ,

Development of a complete simulation model for predicting the hydraulic and separation performance of distillation columns equipped with structured packings, Chem. Biochem. Eng. Q, vol.11, pp.31-46, 1997. ,

Effect of column diameter on pressure drop of a corrugated sheet structured packing, Trans IChemE, vol.77, 1999. ,

A general correlation for predicting the loading point of corrugated sheet structured packings, Ind. Eng. Chem. Res, vol.38, pp.3663-3669, 1999. ,

, Chemical Engineering, vol.6, 2004.

Distillation Design, 1992. ,

Establishing a facility to measure packed column hydrodynamics, Thesis, 2010. ,

Experimental Characterization and Modeling of the Performance of a Large Specific Area High Capacity Structured Packing, Ind. Eng. Chem. Res, vol.46, pp.883-893, 2007. ,

Prediction of Mass Transfer Columns with dumped and Arranged Packings: Updated Summary of the Calculation Method of Billet and Schultes, Trans. IChemE, vol.77, pp.498-504, 1999. ,

A critical evaluation and refinement of the performance prediction of wet-cooling towers, 2003. ,

A critical investigation into the heat and mass transfer analysis of counter-flow wet cooling towers, Int. J. Heat and Mass Transfer, vol.48, pp.765-777, 2005. ,

Direct contact condensation in packed columns, Int. J. Heat and Mass Transfer, vol.49, pp.4751-4761, 2006. ,

A comprehensive model for the performance of columns containing structured packing, ICHEME Symp. Ser, vol.128, pp.489-507, 1992. ,

Distillation columns containing structured packing: a comprehensive model for their performance, Ind. Eng. Chem. Res, vol.35, pp.1660-1667, 1996. ,

, Depending on the condensation temperatures, the net power varies from 6.45 to 11.38 kJ.kg 1 dg for "IRC

, As the condensation temperature increases, the relative improvement of the turbine and net powers decrease

Evaluation of different water vapor capture technologies and energy modeling results for membrane technology, 2012. ,

, Ashrae Fundamentals, Sorbents and desiccants. American Society of Heating, Refrigeration and Air-Conditioning Engineers, p.22, 2001.

, Ashrae Systems and Equipment, Desiccant dehumidification and pressure drying equipment. American Society of Heating, Refrigeration and Air-Conditioning Engineers, p.22, 2000.

, Aqueous solutions of lithium and calcium chlorides: Property formulations for use in air conditioning equipment design, M. CONDE ENGINEERING, 2004.

Thermodynamic properties of lithium bromide-water solutions at high temperatures, International Journal of Refrigeration, vol.24, pp.374-390, 2001. ,

American Society of Heating, Refrigeration and Air-Conditioning Engineers, 2001. ,

Measurement of thermo physical properties of LiBr-solutions at high temperatures and concentrations, International Absorption Heat Pump Conference, vol.31, pp.493-99, 1993. ,

Crystallization Temperature of Aqueous Lithium Bromide Solutions at Low Evaporation Temperature. Whole Building and Community Integration, Energy & Transportation Science Division, 2008. ,

Liquid desiccant air conditioners, Ashrae journal, 2004. ,

Reference Fluid Thermodynamic and Transport Properties, NIST Standard Reference Database, vol.23, 2010. ,

ASPEN Plus 12.1 Instructional tutorials, 2004. ,